aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: fix Archer C7v4 5GHz MAC-addressDavid Bauer2018-01-091-1/+4
| | | | | | | | | | | The TP-Link firmware uses (primary_mac-1) as MAC-address for the 5GHz WiFi. This applies the same behaviour to LEDE. Currently, the MAC-address is retrieved from eth1, which does not exist on the Archer C7 v4. As a result from this, every C7 v4 with LEDE carries the same MAC-Address on the 5GHz WiFi. Signed-off-by: David Bauer <mail@david-bauer.net>
* ar71xx: remove obsolete '< KERNEL_VERSION(4, 4, 0)' checkGabor Juhos2018-01-091-5/+0
| | | | | | | | | Because the oldest supported kernel version on the ar71xx target is 4.4, the condition that the kernel version is smaller than 4.4.0 is always false. Remove the obsolete check from mach-rb4xx.c to clean up the code a bit. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: remove obsolete '< KERNEL_VERSION(4, 2, 0)' checkGabor Juhos2018-01-091-7/+0
| | | | | | | | | Because the oldest supported kernel version on the ar71xx target is 4.4, the condition that the kernel version is smaller than 4.2.0 is always false. Remove the obsolete check from ag71xx_main.c to clean up the code a bit. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: remove obsolete '< KERNEL_VERSION(3, 15, 0)' checksGabor Juhos2018-01-092-17/+0
| | | | | | | | | Because the oldest supported kernel version on the ar71xx target is 4.4, the condition that the kernel version is smaller than 3.15.0 is always false. Remove the obsolete checks from the target specific source files to clean up the code a bit. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx/mikrotik: disable TP-Link TL-WR810N v2 board supportGabor Juhos2018-01-091-0/+1
| | | | | | It does not belongs to the MikroTik boards. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx/mikrotik: disable unused MTD partitioning and split driversGabor Juhos2018-01-091-0/+6
| | | | | | Reduces the compressed kernel size by ~2.5KB. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx/mikrotik: disable unused ethernet switch and phy driversGabor Juhos2018-01-091-0/+4
| | | | | | | | | | | | | | | | | | | | Disable the drivers for the following ethernet switches: Realtek RTL8306 Realtek RTL8366/8367 Marvell 88E6060 (DSA) Marvell 88E6063 (DSA) Also disable the phy driver for Marvell PHYs. None of the supported RouterBOARDs are using any device which needs these drivers. Disable the DSA framework too, because it is not required by the remaining switch drivers. This reduces the compressed kernel size by ~20KB. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: fix Kconfig dependency of the 88E6063 switch DSA driverGabor Juhos2018-01-092-2/+4
| | | | | | | | | | | | The Marvell 88E6063 ethernet switch driver depends on the DSA framework. Add a 'depends on NET_DSA' statement to its Kconfig entry to state that explicitly. Fixes the following Kconfig warning: warning: (NET_DSA_MV88E6060 && NET_DSA_MV88E6063) selects NET_DSA_TAG_TRAILER which has unmet direct dependencies (NET && NET_DSA) Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: sort kernel configurationsGabor Juhos2018-01-094-6/+6
| | | | | | | The symbols in some kernel configurations of the target are in wrong order. Sort them with kconfig.pl. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: fix compiler warnings in mdio-bitbang.c for 4.4Gabor Juhos2018-01-072-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Building Linux 4.4 for ar71xx throws the following warnings in drivers/net/phy/mdio-bitbang.c: CC drivers/net/phy/mdio-bitbang.o In file included from include/linux/irqflags.h:14:0, from drivers/net/phy/mdio-bitbang.c:20: drivers/net/phy/mdio-bitbang.c: In function 'mdiobb_read': include/linux/typecheck.h:11:18: warning: comparison of distinct pointer types lacks a cast (void)(&__dummy == &__dummy2); \ ^ include/linux/irqflags.h:63:3: note: in expansion of macro 'typecheck' typecheck(unsigned long, flags); \ ^ include/linux/irqflags.h:124:3: note: in expansion of macro 'raw_local_irq_save' raw_local_irq_save(flags); \ ^ drivers/net/phy/mdio-bitbang.c:162:2: note: in expansion of macro 'local_irq_save' local_irq_save(flags); ^ include/linux/typecheck.h:11:18: warning: comparison of distinct pointer types lacks a cast (void)(&__dummy == &__dummy2); \ ^ include/linux/irqflags.h:68:3: note: in expansion of macro 'typecheck' typecheck(unsigned long, flags); \ ^ include/linux/irqflags.h:126:39: note: in expansion of macro 'raw_local_irq_restore' #define local_irq_restore(flags) do { raw_local_irq_restore(flags); } while (0) ^ drivers/net/phy/mdio-bitbang.c:175:2: note: in expansion of macro 'local_irq_restore' local_irq_restore(flags); ^ drivers/net/phy/mdio-bitbang.c:159:11: warning: unused variable 'i' [-Wunused-variable] int ret, i; ^ In file included from include/linux/irqflags.h:14:0, from drivers/net/phy/mdio-bitbang.c:20: drivers/net/phy/mdio-bitbang.c: In function 'mdiobb_write': include/linux/typecheck.h:11:18: warning: comparison of distinct pointer types lacks a cast (void)(&__dummy == &__dummy2); \ ^ include/linux/irqflags.h:63:3: note: in expansion of macro 'typecheck' typecheck(unsigned long, flags); \ ^ include/linux/irqflags.h:124:3: note: in expansion of macro 'raw_local_irq_save' raw_local_irq_save(flags); \ ^ drivers/net/phy/mdio-bitbang.c:185:2: note: in expansion of macro 'local_irq_save' local_irq_save(flags); ^ include/linux/typecheck.h:11:18: warning: comparison of distinct pointer types lacks a cast (void)(&__dummy == &__dummy2); \ ^ include/linux/irqflags.h:68:3: note: in expansion of macro 'typecheck' typecheck(unsigned long, flags); \ ^ include/linux/irqflags.h:126:39: note: in expansion of macro 'raw_local_irq_restore' #define local_irq_restore(flags) do { raw_local_irq_restore(flags); } while (0) ^ drivers/net/phy/mdio-bitbang.c:200:2: note: in expansion of macro 'local_irq_restore' local_irq_restore(flags); ^ These are caused by the 900-mdio_bitbang_ignore_ta_value and 901-phy-mdio-bitbang-prevent-rescheduling-during-command patches. The first patch removes some code but it does not remove the variable which is used by the removed code only. The second patch adds local_irq_{save,restore} calls. The type of the argument of these calls must be 'unsigned long', but the patch defines the variable as 'long'. Fix both patches to silence the warnings. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ag71xx: Fix rx ring buffer stall on small packets flood on qca956x and qca953x.Vittorio Gambaletta2017-12-293-1/+22
| | | | | | Backported from Code Aurora QSDK Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
* ar71xx: spi-rb4xx: balance clk_prepare_enable() callGabor Juhos2017-12-241-2/+2
| | | | | | | | | | | | | Commit c312cef223dd ("ar71xx: spi-rb4xx fix.") replaced the clk_enable() call with clk_prepare_enable() to meet the common clock framework requirements. However it did not change the clk_disable() call in the error patch which thus leads to imbalance. Fix the code by using the correct counterpart of clk_prepare_enable() in both places. Fixes: c312cef223dd ("ar71xx: spi-rb4xx fix.") Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: add support for MikroTik RouterBOARD 921GS-5HPacD r2 (mANTBox 15s)Roger Pueyo Centelles2017-12-216-3/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the MikroTik RouterBOARD 921GS-5HPacD r2 (mANTBox 15s), an outdoor sector antenna with a built-in 802.11ac wireless router. Additionally, it adds a new profile for devices with >= 128 MB NAND flash and 802.11ac to the ar71xx/mikrotik subtarget. See https://mikrotik.com/product/RB921GS-5HPacD-15S for more info. Specifications: - SoC: Qualcomm Atheros QCA9558 (720 MHz) - RAM: 128 MB - Storage: 128 MB NAND - Wireless: external QCA9822 802.11a/ac 2x2:2 - Ethernet: 1x 1000/100/10 Mbps, integrated, via AR8031 PHY, passive PoE in - SFP: 1x host Working: - Board/system detection - NAND storage detection - Wireless - Ethernet - 1x user LED - Reset button - Sysupgrade Untested: - SFP cage (probably not working) Installation: - Boot initramfs image via TFTP and then flash sysupgrade image Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* ar71xx: fix spelling in mach-rb922.cRoger Pueyo Centelles2017-12-211-1/+1
| | | | Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* ar71xx: fix rb922gs_nand_scan_fixup()Roger Pueyo Centelles2017-12-211-1/+5
| | | | | | | | | Apply code from commits 9e1bc27e6d67fa29791eb0fac5e5f0066d12a761 (ar71xx: Fix UBIFS work on Mikrotik RB95x devices) and 665bb2749906aff4d4ec607a308353fa30cb1b3a (ar71xx: fix invalid pointer dereference in rb95x_nand_scan_fixup()) to RB92x devices too. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* kernel: Update kernel 4.9 to 4.9.70Hauke Mehrtens2017-12-193-3/+3
| | | | | | Runtime tested on lantiq. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: fix lan ports on ens202extMarty E. Plummer2017-12-181-0/+1
| | | | | | | | | In the stock firmware both eth0 and eth1 are set to br-lan, add this behavior to our images. Fixes: FS#1084 Signed-off-by: Marty E. Plummer <hanetzer@protonmail.com>
* ar71xx: fix invalid pointer dereference in rb95x_nand_scan_fixup()Gabor Juhos2017-12-161-0/+4
| | | | | | | | | | | | Since Linux 4.6, mtd->priv no longer points to the NAND specific structure. Under 4.9 it contains NULL, thus using it to access chip->options causes an invalid pointer dereference (FS#1200). Update the code to use the mtd_to_nand() helper under 4.9 to obtain the address of the chip specific data. Fixes: 7bbf4117c6fe ("ar71xx: Add kernel 4.9 support") Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: fix invalid pointer dereference in c60_nand_scan_fixup()Gabor Juhos2017-12-151-0/+4
| | | | | | | | | | | | | | | | Since Linux 4.6, mtd->priv no longer points to the NAND specific structure. Under 4.9 it contains NULL, thus using it to access the fields of the nand_chip structure causes an invalid pointer dereference. Update the code to use the mtd_to_nand() helper under 4.9 to obtain the address of the chip specific data. Compile tested only. Fixes: 7bbf4117c6fe ("ar71xx: Add kernel 4.9 support") Signed-off-by: Gabor Juhos <juhosg@freemail.hu> Tested-by: Christian Lamparter <chunkeey@gmail.com>
* ar71xx: fix LED name typo for GL-AR300Mkyson Lok2017-12-151-1/+1
| | | | | | It shouldn't use double colon characters. Signed-off-by: kyson Lok <kysonlok@gmail.com>
* Revert "ar71xx: TL-WR1043N v4/v5: add orange WAN LED support"John Crispin2017-12-141-19/+3
| | | | | | | | | | This reverts commit 256990cbc0157feb8a9f37efeebf0330ab73727f. this commit caused a compile error "TL_WR1043_V5_GPIO_LED_WANORANGE" is undefined. Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: TL-WR1043N v4/v5: add orange WAN LED supportTim Thorpe2017-12-141-3/+19
| | | | | | | Add missing definitions for the orange WAN LED on the TL-WR1043N(D) v4 and v5. Minor format correction on a constant for consistency. Signed-off-by: Tim Thorpe <tim@tfthorpe.net>
* ar71xx: generate BR region-code factory image for TP-Link TL-WR940NHenryk Heisig2017-12-141-1/+2
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ar71xx: Fix switch port numbering on MIkrotik RB951Ui-2nD and RB493GJoão Chaínho2017-12-141-4/+4
| | | | | | | This patch fixes the switch port numbering on Mikrotik RB951Ui-2nD (hAP). Also fixes the switch port numbering shown on LuCI for Mikrotik RB493G. Signed-off-by: João Chaínho <joaochainho@gmail.com>
* ar71xx: fix lzma-loader build with glibcJonas Gorski2017-12-131-1/+1
| | | | | | | | | | | | | | | | For an unknown reason gcc tries to link in crti.o when building with a glibc toolchain (this does not happen with other targets). Prevent this by telling gcc explicitly to not do that. Fixes the following build error: /home/jonas/git/lede/staging_dir/toolchain-mips_24kc_gcc-5.5.0_glibc/lib/gcc/mips-openwrt-linux-gnu/5.5.0/../../../../mips-openwrt-linux-gnu/lib/crti.o: In function `_init': (.init+0x18): relocation truncated to fit: R_MIPS_GOT16 against `__gmon_start__' /home/jonas/git/lede/staging_dir/toolchain-mips_24kc_gcc-5.5.0_glibc/lib/gcc/mips-openwrt-linux-gnu/5.5.0/../../../../mips-openwrt-linux-gnu/lib/crti.o: In function `_init': (.init+0x28): relocation truncated to fit: R_MIPS_CALL16 against `__gmon_start__' collect2: error: ld returned 1 exit status Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* treewide: add only one device when appending to TARGET_DEVICESLuis Araneda2017-12-124-32/+157
| | | | | | | | | This will avoid some conflicts when doing a git rebase or merge, specially when adding support to a new device. Signed-off-by: Luis Araneda <luaraneda@gmail.com> [drop brcm47xx changes which rename the images] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx: fix board detection with newer RouterBOOT versionsGabor Juhos2017-12-122-0/+86
| | | | | | | | | | | | | | | Recent RouterBOOT version (at least version 3.41 on RB911G-5HPacD) use "Board=" kernel parameter instead of "board=" to pass the board name to the kernel. Due to this change the board detection code is not working on the devices shipped with the new RouterBOOT version. Because the kernel is unable to identify these boards they become unusable despite that they are supported by the current code. Update the prom_init code to convert the 'Board' kernel parameter to 'board'. After this change, the board detection works also with the new RouterBOOT versions. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: remove nand_board_name platform overrideMathias Kresin2017-12-081-9/+0
| | | | | | | The boardname isn't used any longer to find the subdirectory in the sysupgrade tar archive, which makes this override useless. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: MIPS compile out no-op DMA mapping ops where possibleFelix Fietkau2017-12-081-1/+1
| | | | | | Slightly improves networking throughput on some devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ag71xx: Reduce NAPI weight to 32.Rosen Penev2017-12-081-1/+6
| | | | | | | | | | | | | | Qualcomm claims this reduces cache misses. Original commit message below: From: Ben Menchaca <ben.menchaca@qca.qualcomm.com> Date: Tue, 11 Jun 2013 12:18:46 -0500 Subject: [ag71xx] reduce NAPI weight In an attempt to increase our cache warmth, we are decreasing NAPI. This increases the warmth of the reused SKBs. Signed-off-by: Ben Menchaca <ben.menchaca@qca.qualcomm.com> Signed-off-by: Rosen Penev <rosenp@gmail.com>
* Revert "ag71xx: Switch from driver to kernel macro for NAPI_WEIGHT."Rosen Penev2017-12-083-6/+7
| | | | | | The motivation for this was misguided. It turns out tuning the NAPI weight could be useful for testing purposes. Therefore reverting. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* merge: targets: update image generation and targetsZoltan HERPAI2017-12-083-5/+5
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ar71xx: C58/C59 fix LAN1 working incorrectlyDavid Bauer2017-12-081-1/+1
| | | | | | | This commit fixes LAN Port 1 not transferring data in case no other LAN Port has active link-state on TP-Link Archer C58/C59. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 4.9 to 4.9.67Stijn Tintel2017-12-073-3/+3
| | | | | | | | | | | | | | | | | | | Refresh patches. Remove upstreamed patches: - generic/190-1-5-e1000e-Fix-error-path-in-link-detection.patch - generic/190-3-5-e1000e-Fix-return-value-test.patch - generic/190-4-5-e1000e-Separate-signaling-for-link-check-link-up.patch - generic/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch - ramips/0102-MIPS-ralink-Fix-MT7628-pinmux.patch - ramips/0103-MIPS-ralink-Fix-typo-in-mt7628-pinmux-function Update patches that no longer apply: - layerscape/815-spi-support-layerscape.patch - ramips/0099-pci-mt7620.patch Compile-tested on ar71xx, brcm2708/bcm2708, octeon and x86/64. Runtime-tested on ar71xx, brcm2708/bcm2708, octeon and x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: Update kernel 4.4 to 4.4.100Rosen Penev2017-11-251-3/+3
| | | | | | Run-tested on ramips Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: bump 4.9 to 4.9.63Koen Vandeputte2017-11-222-2/+2
| | | | | | | | | | | Refreshed all patches. Removed upstreamed parts. Compile-tested: cns3xxx, imx6, mvebu, layerscape Run-tested: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: merge mach-files for TP-Link TL-WR802N v1 and v2Paul Wassi2017-11-143-131/+53
| | | | | | | TP-Link TL-WR802N v1 and v2 are set up with almost same configuration in the mach-files. Merge the mach-files of these devices. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ar71xx: add support for TP-Link TL-WR1043N v5Tim Thorpe2017-11-1413-3/+123
| | | | | | | | | | | | | | | | | | | | | TP-Link TL-WR1043N v5 appears to be identical to the TL-WR1043ND v4, except that the USB port has been removed and there is no longer a removable antenna option. The software is more in line with the Archer series in that it uses a nested bootloader scheme. Specifications: - QCA9563 at 775 MHz - 64 MB RAM - 16 MB flash - 3 (non-detachable) Antennas / 450 Mbit - 1x/4x WAN/LAN Gbps Ethernet (QCA8337) - reset and Wi-Fi buttons Signed-off-by: Tim Thorpe <tim@tfthorpe.net> Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
* ar71xx: add support for TP-Link TL-WA901ND v5Paul Wassi2017-11-148-3/+21
| | | | | | | | The TL-WA901ND v5 has the same hardware as v4, although the PCB has a different layout. Installation from factory is done via TFTP. (rename -factory image to wa901ndv4_tp_recovery.bin for tftp) Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ar71xx: complete support for RB mAP 2nDRobert Marko2017-11-1410-12/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the MikroTik RouterBOARD mAP 2nD https://mikrotik.com/product/RBmAP2nD Specifications: - SoC: Qualcomm QCA9531 (650 MHz) - RAM: 64 MB - Storage: 16 MB NOR SPI flash - Wireless: builtin QCA9531, 2x2:2 - Ethernet: 2x100M (802.3af/at POE in and passive POE out on ETH2) - USB: microUSB type AB port This patch adds missing code to fully support mAP. Machfile already contained configuration for mAP 2nD, but device specific configuration like LEDs etc., was missing. Note: The POE LED works but doesn't turn on when POE passthrough is enabled, despite being configured with GPIO trigger. Installation 1. Login to the Mikrotik WebUI to backup your licence keys 2. Setup a DHCP/BOOTP server with: - DHCP-Option 66 (TFTP server name) pointing to a local TFTP server within the same subnet of the DHCP range - DHCP-Option 67 (Bootfile-Name) matching the initramfs filename of the to be booted image 3. Connect the port labeled internet to your local network 4. Keep the reset button pushed down and power on the board The board should load and start the initramfs image from the TFTP server. Login as root/without password to the started LEDE via SSH listing on IPv4 address 192.168.1.1. Use sysupgrade to install LEDE. Revert to RouterOS Use the "rbcfg" package on in LEDE: - rbcfg set boot_protocol bootp - rbcfg set boot_device ethnand - rbcfg apply Open Netinstall and reboot routerboard. Now Netinstall sees RouterBOARD and you can install RouterOS. If NetInstall gets stuck on Sending offer just wait for it to timeout and then close and open Netinstall again. Click on install again. In order for RouterOS to function properly, you need to restore license for the device. You can do that by including license in NetInstall. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ar71xx: fix network setup for UniFiPaul Wassi2017-11-141-0/+1
| | | | | | | | The Ubiquiti UniFi APs just have eth0. Until now, the setup script fell through to the default case and configured the (not present) eth1 as WAN with DHCP. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ar71xx: complete support for RB wAP 2nDRobert Marko2017-11-149-8/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the MikroTik RouterBOARD wAP https://mikrotik.com/product/RBwAP2nD Specifications: - SoC: Qualcomm QCA9533 (650 MHz) - RAM: 64 MB - Storage: 16 MB NOR SPI flash - Wireless: built-in QCA9533, 2x2:2 - Ethernet: 1x100M (802.3af/at POE in) This patch adds missing code to fully support wAP. Machfile already contained configuration for wAP 2nD but device specific configuration like LEDs etc. was missing. Installation: 1. Login to the Mikrotik WebUI to backup your licence keys 2. Setup a DHCP/BOOTP server with: - DHCP-Option 66 (TFTP server name) pointing to a local TFTP server within the same subnet of the DHCP range - DHCP-Option 67 (Bootfile-Name) matching the initramfs filename of the to be booted image 3. Connect the port labeled internet to your local network 4. Keep the reset button pushed down and power on the board The board should load and start the initramfs image from the TFTP server. Login as root/without password to the started LEDE via SSH listing on IPv4 address 192.168.1.1. Use sysupgrade to install LEDE. Revert to RouterOS Use the "rbcfg" package on in LEDE: - rbcfg set boot_protocol bootp - rbcfg set boot_device ethnand - rbcfg apply Open Netinstall and reboot routerboard. Now Netinstall sees RouterBOARD and you can install RouterOS. If NetInstall gets stuck on Sending offer just wait for it to timeout and then close and open Netinstall again. Click on install again. In order for RouterOS to function properly, you need to restore license for the device. You can do that by including license in NetInstall. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ar71xx: add support for TP-Link TL-WR810N v2Paul Wassi2017-11-1411-14/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link TL-WR810N v2 is a compact Wi-Fi router with two Ethernet ports. Specification: - QCA9533 (650 MHz) - 32 MB RAM - 8 MB Flash - 300 Mbps Wi-Fi 2.4 GHz - 2x 10/100 Mbps Ethernet (eth0, eth1) - UART on testpads on PCB - 1x LED (GPIO-controlled) - 1x reset/WPS button - 1x slide-switch with 2 GPIO inputs Flash instructions: - Flash as regular firmware update in Web UI - Default: 192.168.0.254 / admin / admin - Select *-factory.bin When holding reset button during power-up, U-Boot requests a file 'wr810nv1_tp_recovery.bin' from TFTP server at 192.168.0.66 Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ar71xx: add support for Wallys DR342Piotr Dymacz2017-11-1413-45/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Wallys DR342 is a 5 GHz, 2T2R AP/CPE board based on Atheros AR9342. Short specification: - 560/450/225 MHz (CPU/DDR/AHB) - 1x Gbps Ethernet (AR8035) with passive PoE support (24-56 V) - 64 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 5 GHz with external FEM (SKY85728-11), up to 30 dBm - 2x MMCX connectors - miniPCIe connector with PCIe and USB 2.0 buses - optional miniSIM slot - 7x LED, 1x button - UART, (E)JTAG and LED headers - 1x DC jack for main power (12-56 V) Flash instruction (do it under U-Boot, using UART): 1. tftp 0x82000000 lede-ar71xx-generic-dr342-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: increase kernel partition size for TP-Link RE450 v1Piotr Dymacz2017-11-141-1/+1
| | | | | | | | | | | This increases kernel partition size and fixes rootfs (file-system) partition size on TP-Link RE450 v1. Also, while we are at it, switch from statically defined kernel and rootfs partitions in kernel cmdline to "tplink-fw" mtd splitter. Fixes: FS#1072. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: fix typo in Kconfig.openwrtPiotr Dymacz2017-11-141-1/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: image: fix typo in tp-link.mkPiotr Dymacz2017-11-141-3/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: increase kernel partition size for some TP-Link boardsHenryk Heisig2017-11-141-5/+6
| | | | | | | | | | | | | | This patch increases kernel partition size and re-enables image generation for below TP-Link boards: - archer-c58-v1 - archer-c60-v1 - tl-wr902ac-v1 - tl-wr942n-v1 Signed-off-by: Henryk Heisig <hyniu@o2.pl> [commit message and title reworded] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: fix regression in 74x164 initialization with 4.9Felix Fietkau2017-11-101-10/+12
| | | | | | | | | The memcpy of the init data relies on chip->registers to be initialized, which only happens later in the code. Move this initialization further down to make it work. This was breaking PCIe/USB on some MikroTik RouterBoard devices. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ag71xx: Switch from driver to kernel macro for NAPI_WEIGHT.Rosen Penev2017-11-063-7/+6
| | | | | | NAPI_POLL_WEIGHT was introduced in the kernel for exactly this purpose 5 years ago. Signed-off-by: Rosen Penev <rosenp@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 04:24:58 +0000