aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: fix ethernet driver fast reset issue causing tx timeoutsFelix Fietkau2016-09-031-1/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: generate US- and EU-specific images for the Archer C7 v2Matthias Schiffer2016-08-281-1/+3
| | | | | | | | | | | | TP-Link has started providing US- and EU-specific stock firmwares that only allow upgrading to firmwares with the same region code. Provide factory images for both these regions. To avoid confusing users outside these regions, we still provide a "universal" factory.bin without a region code, although flashing either of the US and EU images would work as well. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: disable flow control to the built-in switch on AR934xFelix Fietkau2016-08-251-1/+0
| | | | | | | It apparently causes a regression on some devices if the ethernet cable is plugged in while booting. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: switch to 24kcJonas Gorski2016-08-231-1/+1
| | | | | | | GCC treats 24kc and 34kc exactly the same and will generate identical code, so there is no need to tune to 34kc instead of 24kc. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* kernel: update kernel 4.4 to version 4.4.19Stijn Tintel2016-08-231-4/+4
| | | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on all targets that use kernel 4.4 and aren't marked broken. Runtime-tested on ar71xx, octeon and x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ar71xx: add support for Zbtlink ZBT-WE1526Piotr Dymacz2016-08-1812-1/+191
| | | | | | | | | | | | | | | | | | | | | Zbtlink ZBT-WE1526 is based on Qualcomm Atheros QCA9531 v2. Short specification: - 650/400/200 MHz (CPU/DDR/AHB) - 5x 10/100 Mbps Ethernet - 1x USB 2.0 - 128 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz, up to 22 dBm - two external, non-detachable antennas - 8x LED, 1x button - UART header (pinout: VCC, RX, TX, GND) Flash instruction: Use sysupgrade in vendor firmare which is based on OpenWrt. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: fix profile name of Mercury MW4530RChuanhong Guo2016-08-152-2/+2
| | | | | | | | The mw4530r-v1 profile in tp-link.mk is for Mercury MW4530R. There is no such a device called TL-WDR4530. Also change MERCURY to Mercury in /lib/ar71xx.sh Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ar71xx: add missing LZO support select for routerboard devicesFelix Fietkau2016-08-041-1/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove useless minimal/ath5k profilesFelix Fietkau2016-08-022-34/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: Make wget2nand look for LEDE project firmware filesdiizzyy2016-07-261-2/+2
| | | | | | Make wget2nand aware of the new file names Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* image: add a helper variable for getting kernel/rootfs from within image ↵Felix Fietkau2016-07-313-8/+8
| | | | | | Build/* templates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: rename sysupgrade-nand to sysupgrade-tarJo-Philipp Wich2016-07-291-1/+1
| | | | | | | Now that the "sysupgrade-nand" step is used by non-NAND targets as well, rename it to "sysupgrade-tar" to make it more generic. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: don't use D-Link DIR-505 status LED as ethernet indicatorMatthias Schiffer2016-07-281-4/+0
| | | | | | | | | The stock firmware uses the single LED as status indicator only. Using the same LED both for status and as ethernet indicator is uncommon, and has been confusing users who were using the device as a WLAN mesh node (so the LED was just off, as no ethernet was connected). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: add revision detection for D-Link DIR-505 A1/A2Matthias Schiffer2016-07-281-0/+10
| | | | | | The A1 image also works on the A2, correctly set AR71XX_MODEL in this case. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: add a missing ;; to ar71xx.shJohn Crispin2016-07-241-0/+1
| | | | | | | | commit 42305ae24aa7 ("ar71xx: add support for gl-mifi") was missing a ;; breaking boot up Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: add support for gl-mifiZhao Gang2016-07-2410-0/+148
| | | | | | | This add initial support for gl-mifi. Product page: http://www.gl-inet.com/mifi/ Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
* ar71xx: clean up legacy-devices.mkMatthias Schiffer2016-07-272-322/+407
| | | | | | | | | Several legacy images were not buildable because of missing profile definitions in legacy-devices.mk since MultiProfile was removed. Update legacy-devices.mk to provide all necessary profiles, and change ordering to match legacy.mk. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: add ath10k firmware to profile defaults where ath10k is usedFelix Fietkau2016-07-224-33/+33
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add missing profile for the nand subtarget (FS#56)Felix Fietkau2016-07-211-0/+18
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix WNDR4300v1 / WNDR3700v4 build (FS#56)Felix Fietkau2016-07-211-3/+9
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix more image build code whitespace/tab issuesFelix Fietkau2016-07-211-6/+6
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix tab vs whitespace issue in image building codeFelix Fietkau2016-07-211-180/+180
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove obsolete MultiProfile template codeFelix Fietkau2016-07-211-40/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix default network config of WZR-HP-G300NH and CR3000Jo-Philipp Wich2016-07-201-2/+2
| | | | | | | | | | | The network defaults for the WZR-HP-G300NH and CR3000 models wrongly set the lan interface to a vlan tagged device while the switch was set up in untagged mode, leading to broken lan side ethernet connectivity by default. Fix the issue by emitting untagged interfaces, consistent with the switch setting on the device. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: add support for gl-ar300mZhao Gang2016-07-2011-0/+217
| | | | | | | This add initial support for gl-ar300m router. Product page: http://www.gl-inet.com/ar300m/ Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
* ar71xx: add software transmit timestamp supportStephen Walker2016-07-152-0/+3
| | | | | | Add software transmit timestamp and ethtool (-T) timestamp support Signed-off-by: Stephen Walker <stephendwalker+github@gmail.com>
* ar71xx: define wmac reset function for QCA955xFelix Fietkau2016-07-152-3/+85
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add support for jjPlus JWAP230Piotr Dymacz2016-07-1310-0/+192
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | jjPlus JWAP230 is based on Qualcomm Atheros QCA9558 + QCA8337. Short specification: - 720/600/200 MHz (CPU/DDR/AHB) - 2x 10/100/1000 Mbps Ethernet - 128 MB of RAM (DDR2) - 16 MB of FLASH - 3T3R 2.4 GHz with external PA (SST12LP15A), up to 28 dBm - 3x MMCX connectors - power input: 802.3at PoE or wide range DC (36-57 V) - optional 802.3af PSE - 1x mini-PCIe connector with PCIe, USB buses and SIM slot - 1x mini-PCIe connector with PCIe bus - 1x USB type-A connector - 6x LED, 1x button (hardware reset) - RS232 (MAX3223) and (E)JTAG headers Default configuration: - WAN on eth1 (RJ45 near LEDs with PoE input) - LAN on eth0 (RJ45 near DC jack) - left top LED set to be status LED - all LEDs configurable form user space Flash instruction (do it under U-Boot, using RS232): 1. tftp 0x80060000 lede-ar71xx-generic-jwap230-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for Wallys DR531Piotr Dymacz2016-07-1311-0/+190
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wallys DR531 is based on Qualcomm Atheros QCA9531 v2. Short specification: - 550/400/200 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz with external PA (SE2576L), up to 30 dBm - 2x MMCX connectors - mini-PCIe connector with PCIe/USB buses and SIM slot - 7x LED, 1x button, 1x optional buzzer - UART, (E)JTAG and LED headers Default configuration: - WAN on eth1 (RJ45 near DC jack) - LAN on eth0 (RJ45 near button) - S4 LED set to be status LED - all LEDs configurable form user space - button configured for reset Flash instruction (do it under U-Boot, using UART): 1. tftp 0x80060000 lede-ar71xx-generic-dr531-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: fix build error when initramfs is disabledFelix Fietkau2016-07-131-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix a legacy image porting issueFelix Fietkau2016-07-132-8/+1
| | | | | | | Get rid of remaining IMAGE_PROFILE references and move template calls the right place Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: Fix PowerCloud CAP324 No Cloud titleDaniel Dickinson2016-07-111-1/+1
| | | | | | CAP324 nocloud was missing (No-Cloud) in description Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
* ar71xx: base-files: remove the now unneeded 09_fix-seama-headerYousong Zhou2016-07-111-21/+0
| | | | | | | | | | | | It was intended as a workaround when jffs2 eof mark was included in the checksum calculation in seama header. When qihoo-c301 support was introduced the board name was not inserted into the case list (because I was not aware of it's existence), but the issue was fixed by excluding the jffs2 marker as part of the checksum data Now we are at it, drop it. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: image: fix typo in MTDPARTS def for qihoo-c301Yousong Zhou2016-07-111-1/+1
| | | | | Reported-by: Syrone Wong <wong.syrone@gmail.com> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: image: seama: fix making factory and sysupgrade imageYousong Zhou2016-07-111-11/+12
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* tools: add kernel2minor utility for Mikrotik devicesSergey Sergeev2016-07-051-2/+2
| | | | | | | | This patch adds support of Mikrotik yaffs2 filesystem image for kernel file and tools/kernel2minor package. We neede this to boot kernel through RouterBoot on new Mikrotik NOR flash devices. Signed-off-by: Sergey Sergeev <adron@yapic.net>
* ar71xx: fix nand device profileJohn Crispin2016-07-054-19/+19
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: spi-rb4xx fix.Sergey Sergeev2016-07-021-1/+1
| | | | | | | | In new kernels we should use clk_prepare_enable instead of clk_enable since clk_enable does not make proper initialization that leads to rise WARN_ON messages and not working spi bus on the device. Signed-off-by: Sergey Sergeev <adron@yapic.net>
* ar71xx: prevent spurious ethernet resets from dma hang check false positivesFelix Fietkau2016-07-022-6/+12
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: seama: fix making factory imagesYousong Zhou2016-06-303-58/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | rootfs part needs to be aligned to erase block size which is passed as the 6th argument to Image/Build/Seama and is now 65536 since commit commit 5119ee9 "ar71xx: fix bogus hardcoded kernel image size for Seama images (fixes #20585)", but $(($(6) - 64)) still assumes that the argument is a limit on kernel partition size, i.e. 1310720, so the generated factory image is wrong in that the kernel will fail to find the rootfs (FlySpray link at [1]) This patch will workaround it with the following steps 1. Calculate the required space for seama header and META data in step 5 2. Pre-padding 64 bytes to lzma-compressed loader 3. Generate correctly padded image-$(2).tmp 4. Strip out the padding 5. Seal it with seama utility While at it convert seama to new build method [1] FS#35 - mynet-n750 factory images don't find root partition, https://bugs.lede-project.org/index.php?do=details&task_id=35 Reported-by: Steven Haigh <netwiz@crc.id.au> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: image: unify indentation with 2 whitespacesYousong Zhou2016-06-301-112/+112
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: image: remove duplicate IMAGES definitionYousong Zhou2016-06-301-1/+0
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: hiwifi-hc6361: move packages selection to generic.mkYousong Zhou2016-06-302-14/+9
| | | | | | | Remove kmod-crypto-deflate and kmod-ledtrig-gpio as the device works the same by default without them Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: further legacy image build fixesJo-Philipp Wich2016-06-271-1/+6
| | | | | | | - Add missing macro to trigger the generation of 64k padded squashfs images - Revert Zcomax image generation to use the prepared 64k squashfs image Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: disable pdata->use_flow_control for QCA9558Felix Fietkau2016-06-271-1/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: rename ethernet pdata->builtin_switch to use_flow_controlFelix Fietkau2016-06-273-8/+8
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: merge profiles into image building codeJo-Philipp Wich2016-06-2759-2503/+959
| | | | | | | | | | | - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: update to version 4.4.14Hauke Mehrtens2016-06-261-1/+1
| | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.4.14 Some manual changes to target/linux/generic/patches-4.4/610- netfilter_match_bypass_default_checks.patch were needed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "ar71xx: prevent spurious ethernet resets from dma hang check false ↵Felix Fietkau2016-06-262-6/+5
| | | | | | positives" This reverts commit 3d58d7f053eae83b59baf5c8b8a58da78653f605.
* ar71xx: prevent spurious ethernet resets from dma hang check false positivesFelix Fietkau2016-06-262-5/+6
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 20:19:30 +0000