aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/image
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: add support for Zbtlink ZBT-WE1526Piotr Dymacz2016-08-182-0/+7
| | | | | | | | | | | | | | | | | | | | | Zbtlink ZBT-WE1526 is based on Qualcomm Atheros QCA9531 v2. Short specification: - 650/400/200 MHz (CPU/DDR/AHB) - 5x 10/100 Mbps Ethernet - 1x USB 2.0 - 128 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz, up to 22 dBm - two external, non-detachable antennas - 8x LED, 1x button - UART header (pinout: VCC, RX, TX, GND) Flash instruction: Use sysupgrade in vendor firmare which is based on OpenWrt. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: fix profile name of Mercury MW4530RChuanhong Guo2016-08-151-1/+1
| | | | | | | | The mw4530r-v1 profile in tp-link.mk is for Mercury MW4530R. There is no such a device called TL-WDR4530. Also change MERCURY to Mercury in /lib/ar71xx.sh Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* image: add a helper variable for getting kernel/rootfs from within image ↵Felix Fietkau2016-07-313-8/+8
| | | | | | Build/* templates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: rename sysupgrade-nand to sysupgrade-tarJo-Philipp Wich2016-07-291-1/+1
| | | | | | | Now that the "sysupgrade-nand" step is used by non-NAND targets as well, rename it to "sysupgrade-tar" to make it more generic. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: add support for gl-mifiZhao Gang2016-07-241-0/+10
| | | | | | | This add initial support for gl-mifi. Product page: http://www.gl-inet.com/mifi/ Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
* ar71xx: clean up legacy-devices.mkMatthias Schiffer2016-07-272-322/+407
| | | | | | | | | Several legacy images were not buildable because of missing profile definitions in legacy-devices.mk since MultiProfile was removed. Update legacy-devices.mk to provide all necessary profiles, and change ordering to match legacy.mk. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: add ath10k firmware to profile defaults where ath10k is usedFelix Fietkau2016-07-224-33/+33
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix WNDR4300v1 / WNDR3700v4 build (FS#56)Felix Fietkau2016-07-211-3/+9
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix more image build code whitespace/tab issuesFelix Fietkau2016-07-211-6/+6
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix tab vs whitespace issue in image building codeFelix Fietkau2016-07-211-180/+180
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove obsolete MultiProfile template codeFelix Fietkau2016-07-211-40/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add support for gl-ar300mZhao Gang2016-07-201-0/+10
| | | | | | | This add initial support for gl-ar300m router. Product page: http://www.gl-inet.com/ar300m/ Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
* ar71xx: add support for jjPlus JWAP230Piotr Dymacz2016-07-131-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | jjPlus JWAP230 is based on Qualcomm Atheros QCA9558 + QCA8337. Short specification: - 720/600/200 MHz (CPU/DDR/AHB) - 2x 10/100/1000 Mbps Ethernet - 128 MB of RAM (DDR2) - 16 MB of FLASH - 3T3R 2.4 GHz with external PA (SST12LP15A), up to 28 dBm - 3x MMCX connectors - power input: 802.3at PoE or wide range DC (36-57 V) - optional 802.3af PSE - 1x mini-PCIe connector with PCIe, USB buses and SIM slot - 1x mini-PCIe connector with PCIe bus - 1x USB type-A connector - 6x LED, 1x button (hardware reset) - RS232 (MAX3223) and (E)JTAG headers Default configuration: - WAN on eth1 (RJ45 near LEDs with PoE input) - LAN on eth0 (RJ45 near DC jack) - left top LED set to be status LED - all LEDs configurable form user space Flash instruction (do it under U-Boot, using RS232): 1. tftp 0x80060000 lede-ar71xx-generic-jwap230-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for Wallys DR531Piotr Dymacz2016-07-131-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wallys DR531 is based on Qualcomm Atheros QCA9531 v2. Short specification: - 550/400/200 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz with external PA (SE2576L), up to 30 dBm - 2x MMCX connectors - mini-PCIe connector with PCIe/USB buses and SIM slot - 7x LED, 1x button, 1x optional buzzer - UART, (E)JTAG and LED headers Default configuration: - WAN on eth1 (RJ45 near DC jack) - LAN on eth0 (RJ45 near button) - S4 LED set to be status LED - all LEDs configurable form user space - button configured for reset Flash instruction (do it under U-Boot, using UART): 1. tftp 0x80060000 lede-ar71xx-generic-dr531-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: fix build error when initramfs is disabledFelix Fietkau2016-07-131-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix a legacy image porting issueFelix Fietkau2016-07-132-8/+1
| | | | | | | Get rid of remaining IMAGE_PROFILE references and move template calls the right place Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: Fix PowerCloud CAP324 No Cloud titleDaniel Dickinson2016-07-111-1/+1
| | | | | | CAP324 nocloud was missing (No-Cloud) in description Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
* ar71xx: image: fix typo in MTDPARTS def for qihoo-c301Yousong Zhou2016-07-111-1/+1
| | | | | Reported-by: Syrone Wong <wong.syrone@gmail.com> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: image: seama: fix making factory and sysupgrade imageYousong Zhou2016-07-111-11/+12
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: fix nand device profileJohn Crispin2016-07-054-19/+19
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: seama: fix making factory imagesYousong Zhou2016-06-303-58/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | rootfs part needs to be aligned to erase block size which is passed as the 6th argument to Image/Build/Seama and is now 65536 since commit commit 5119ee9 "ar71xx: fix bogus hardcoded kernel image size for Seama images (fixes #20585)", but $(($(6) - 64)) still assumes that the argument is a limit on kernel partition size, i.e. 1310720, so the generated factory image is wrong in that the kernel will fail to find the rootfs (FlySpray link at [1]) This patch will workaround it with the following steps 1. Calculate the required space for seama header and META data in step 5 2. Pre-padding 64 bytes to lzma-compressed loader 3. Generate correctly padded image-$(2).tmp 4. Strip out the padding 5. Seal it with seama utility While at it convert seama to new build method [1] FS#35 - mynet-n750 factory images don't find root partition, https://bugs.lede-project.org/index.php?do=details&task_id=35 Reported-by: Steven Haigh <netwiz@crc.id.au> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: image: unify indentation with 2 whitespacesYousong Zhou2016-06-301-112/+112
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: image: remove duplicate IMAGES definitionYousong Zhou2016-06-301-1/+0
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: hiwifi-hc6361: move packages selection to generic.mkYousong Zhou2016-06-302-14/+9
| | | | | | | Remove kmod-crypto-deflate and kmod-ledtrig-gpio as the device works the same by default without them Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: further legacy image build fixesJo-Philipp Wich2016-06-271-1/+6
| | | | | | | - Add missing macro to trigger the generation of 64k padded squashfs images - Revert Zcomax image generation to use the prepared 64k squashfs image Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: merge profiles into image building codeJo-Philipp Wich2016-06-276-67/+959
| | | | | | | | | | | - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "ar71xx: fix legacy image building"John Crispin2016-06-236-938/+56
| | | | | | | | | | | | | | This reverts commit 59e98b27c93d282edb62fad756fd1c1e587c067f. and Revert "ar71xx: merge profiles into image building code" This reverts commit 636089ead6864364798ac988299429d171051c0e. these are still causing issues Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: fix legacy image buildingJo-Philipp Wich2016-06-241-20/+14
| | | | | | | | | | | | | | | | | | After the conversion from legacy device profiles to the newer profile information embedded in the image building code, the legacy recipes got triggered twice with different eval depths, leading to shell syntax errors when processing certain images. The double processing was caused by the remaining Image/Build macro in legacy.mk which serves as main entry point for the new style image build code in conjunction with the newly introduced LegacyDevice/* macros which caused the legacy image build fallback code to kick in. In order to fix the issue, rework all legacy macros to work under the legacy image build wrapper and remove the Image/Build macro of legacy.mk to prevent legacy profiles getting executed in the context of the new build code. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: merge profiles into image building codeJohn Crispin2016-06-226-36/+924
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: hiwifi-hc6361: lift size limit on kernel and rootfs partsYousong Zhou2016-06-222-19/+20
| | | | | | | | | | | | | | | | | | | | | | The patch has been run-tested and the relevant dmsg logs are as the following [ 0.762447] Creating 5 MTD partitions on "spi0.0": [ 0.767217] 0x000000000000-0x000000010000 : "u-boot" [ 0.775139] 0x000000010000-0x000000020000 : "bdinfo" [ 0.781014] 0x000000020000-0x000000fe0000 : "firmware" [ 0.810558] 2 uimage-fw partitions found on MTD device firmware [ 0.815043] 0x000000020000-0x000000170000 : "kernel" [ 0.821925] 0x000000170000-0x000000fe0000 : "rootfs" [ 0.827587] mtd: device 4 (rootfs) set to be root filesystem [ 0.831937] 1 squashfs-split partitions found on MTD device rootfs [ 0.837983] 0x0000005c0000-0x000000fe0000 : "rootfs_data" [ 0.845621] 0x000000fe0000-0x000000ff0000 : "backup" [ 0.851445] 0x000000ff0000-0x000001000000 : "art" While at it, convert to new build method Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: add support for OpenEmbed SOM9331Allan Nick Pedrana2016-06-071-0/+9
| | | | | | | | This patch adds the target profile SOM9331 and configures hardware functionality for the 3x Eth Ports & corresponding LED's, the USB Host, the USART to USB bridge and the System LED. Signed-off-by: Allan Nick Pedrana <nik9993@gmail.com>
* ar71xx: convert OM2P to device profileFelix Fietkau2016-06-071-0/+15
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add WRTnode2Q supportKeLei Liang2016-06-061-0/+2
| | | | Signed-off-by: KeLei Liang <xzmu@wrtnode.com>
* ar71xx/image/edimax shorten the revision to 13 characterAlexander Couzens2016-06-011-2/+2
| | | | | | | edimax fails if the revision is longer than 13 characters. Also change the name from OpenWrt to LEDE Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ar71xx: Fix TL-WR841N v11 LEDs, use separate machineStijn Segers2016-05-311-1/+1
| | | | Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
* tools/tplink-safeloader: split CPE210 from CPE510 profileAlexander Couzens2016-05-271-0/+1
| | | | | | | | | The CPE210 was still described for the OEM upgrade as compatible, even the wireless configuration isn't compatible anymore between both series (2ghz and 5ghz). Update the CPE210 image profile to use the new profile. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ar71xx: switch ordering and template to improve readabilityAlexander Couzens2016-05-271-5/+5
| | | | | | | The CPE210's ancestor is the CPE510 not the other way around. The device profile is also named after the CPE510. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* include/image.mk: move build step tplink-safeloader to image.mkAsh Benz2016-05-271-12/+0
| | | | | | Move tplink-safeloader from target/linux/ar71xx/image/tp-link.mk to include/image.mk Signed-off-by: Ash Benz <ash.benz@bk.ru>
* ar71xx/cpe510: split profile into 2 profiles cpe210 and cpe510Alexander Couzens2016-05-231-3/+9
| | | | | | | Split profile into 2GHz and 5GHz. The 5GHz devices are quite "special". The 2 GHz works perfect. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ar71xx: Generate sysupgrade images for OpenMesh devicesSven Eckelmann2016-05-231-0/+3
| | | | | | | | | | | | Some OpenWrt based firmwares like Gluon expect that a sysupgrade image exists when a device firmware can be updated via sysupgrade. This image wasn't created until now because OpenMesh devices use the same image for factory and sysupgrade flash. Copying the image from *factory.bin to *sysupgrade.bin is therefore enough to make the sysupgrade functionality visible. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: Add support for initramfs images for OpenMesh devicesSven Eckelmann2016-05-231-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: move nand device image definitions to a separate fileFelix Fietkau2016-05-232-24/+22
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: move generic device image definitions to a separate fileFelix Fietkau2016-05-232-339/+338
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: split ubnt image building code into a separate fileFelix Fietkau2016-05-232-247/+248
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: split legacy image building code into a separate fileFelix Fietkau2016-05-232-1212/+1219
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: split tp-link image building code into a separate fileFelix Fietkau2016-05-232-746/+748
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add support for TP-LINK TL-WR842N/ND v3Cezary Jackiewicz2016-05-141-1/+8
| | | | | | | | | | | - CPU QCA9531-BL3A - RAM: 64MB - flash: 16MB - USB AP143 platform, similar to tl-wr841n v10/v11, but with USB Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* ar71xx: add proper support for Archer-C7 V2John Crispin2016-05-141-1/+1
| | | | | | This has minor differences to the V1 Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: Add support for Ubiquiti UniFi AP AC PROP.Wassi2016-05-121-1/+7
| | | | | Add support for the Ubiquiti UniFi AP AC PRO Signed-off-by: P.Wassi <p.wassi at gmx.at>
* ar71xx: Rename unifiac to unifiac-liteP.Wassi2016-05-121-8/+13
| | | | | | | To avoid confusion with different unifiac devices, rename existing target "unifiac" to "unifiac-lite", before "unifiac-pro" is introduced. Signed-off-by: P.Wassi <p.wassi at gmx.at>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 17:19:51 +0000