aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: wpe72: set active_low flag for the reset buttonGabor Juhos2014-01-261-0/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39401 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: wp543: set active_low flag for the buttonsGabor Juhos2014-01-261-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39400 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: archer c7: define LEDs connected to the AR8327 switchGabor Juhos2014-01-251-0/+10
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39395 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boardsGabor Juhos2014-01-241-0/+6
| | | | | | | | | | | | | On recent TL-WDR4300 boards the external LNAs of the 2.4GHz interface are connected to GPIO lines. Because these GPIO lines are disabled by default, the RX sensitivity of the device is quite bad. Setup the GPIOs of the external LNAs to fix the issue. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39392 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: wp543: use KEY_RESET code for the sw4 buttonGabor Juhos2014-01-231-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39374 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: mynet-n750: define LEDs connected to the AR8327 switchGabor Juhos2014-01-211-0/+15
| | | | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/4743/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39361 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: tl-wr1043nd-v2: define LEDs connected to the AR8327 switchGabor Juhos2014-01-201-0/+10
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39346 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: tl-wdr4300: define LEDs connected to the AR8327 switchGabor Juhos2014-01-201-0/+10
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39345 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rb2011: define LEDs connected to the AR8327 switchGabor Juhos2014-01-201-0/+16
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39341 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rb2011: fix eth5 LEDGabor Juhos2014-01-201-1/+1
| | | | | | | | | The eth5 LED on the RB2011 is not working because the LED control rule is missing. Fix it. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39335 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: increase calculated max frame length valueGabor Juhos2014-01-111-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The r39147 commit introduces a regression: at lease on some routers with ar8216 switch large packets get lost if 802.1q tagged port is used on the interface connected to the aforementioned switch. The r39147 changes code in the way so interface is set to accept packets no longer than max ethernet frame length for a given mtu. Unfortunately ar8216 has a feature: it sends two additional bytes as a packet header and those this header needs to be added to the max frame length. Otherwise long enough packets get lost. The problem only manuifests itself if interface is used in vlan tagged mode. If interface is untagged then ar8216's header fits into space used by 802.1q tag and not packets are lost. Include two additional bytes in the max frame length calculation to fix the issue. This patch is tested and works with Trendnet TEW-632BRP. Signed-off-by Nikolay Martynov <mar.kolya@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4656/ [juhosg: - simplify the patch to include the additional bytes of the switch header unconditionally, - change subject and update commit message] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39219 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: my net n750: simplify LNA GPIO setupGabor Juhos2014-01-101-6/+2
| | | | | | | | | Use the ath79_wmac_set_ext_lna_gpio helper instead of exporting the GPIOs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39217 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: my net n600: simplify LNA GPIO setupGabor Juhos2014-01-101-6/+2
| | | | | | | | | Use the ath79_wmac_set_ext_lna_gpio helper instead of exporting the GPIOs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39216 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Fix WD My Net N600 weak signal issueGabor Juhos2014-01-101-0/+15
| | | | | | | | | | | | | | | | | | The LNAs need to be enabled by setting their respective GPIO to high even though the original firmware's setting sets them to low on initialization. Obviously the LNAs are then later initialized by the driver on the OEM firmware. Without this fix the device is mostly "deaf". Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Tested-by: Steven Haigh <netwiz@crc.id.au> Patchwork: http://patchwork.openwrt.org/patch/4689/ [juhosg: - remove the GPIO LED changes, the My Net N600 has no yellow LEDs at all, - change subject and update the commit message] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39214 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Fix WD My Net N750 weak signal issueGabor Juhos2014-01-101-2/+2
| | | | | | | | | | | | | | The LNAs need to be enabled by setting their respective GPIO to high even though the original firmware's setting sets them to low on initialization. Obviously the LNAs are then later initialized by the driver on the OEM firmware. Without this fix the device is mostly "deaf". Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/4688/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39213 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix max frame length of the QCA955x SoCsGabor Juhos2013-12-231-0/+11
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39161 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: don't set builtin_switch flag for QCA9558Gabor Juhos2013-12-231-6/+1
| | | | | | | | It makes no sense, the SoC has no built-in switch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39160 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: allow to use large ethernet frames on AR934x SoCsGabor Juhos2013-12-201-0/+4
| | | | | | | | | | | | | | | The hardware supports large ethernet frames. Override the maximum frame length and packet lenght mask in the platform data to allow to use large MTU on the ethernet interfaces. Limit the feature to AR934x SoCs for now. It should work on some other SoCs as well, but those has not been tested yet. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39149 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: fix max frame length setup of the built-in switchesGabor Juhos2013-12-201-5/+12
| | | | | | | | | | | | | The currently used bitmask of the maximum frame length field is wrong for both models. On AR724x/AR933x the largest frame size is 2047 bytes, on the AR934x it is 16383 bytes. Make the MTU setup code model specific, and use the correct bitmask for both models. Also change the value to the maximum. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39148 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: calculate max frame len register value from the MTUGabor Juhos2013-12-201-3/+15
| | | | | | | | | | | | | | | Set the MAX_FRAME_LEN register to zero in ag71xx_hw_init() and write the correct value into that from the ag71xx_open() and ag71xx_fast_reset() functions. Also recalculate the RX buffer size based on the actual maximum frame length value to optimize memory allocation. Additionaly, disallow to change the MTU value while the interface it running. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39147 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: add ag71xx_max_frame_len() helperGabor Juhos2013-12-201-2/+8
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39146 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: get max_frame_len and desc_pktlen_mask from platform dataGabor Juhos2013-12-203-2/+11
| | | | | | | | This will allow to use SoC specific values for both. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39145 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: store descriptor packet length mask in ag71xx structGabor Juhos2013-12-202-7/+5
| | | | | | | | | | | | | | | The currently used bitmask is not correct for all SoCs. Introduce a new field in struct ag71xx and store the bitmask in that. Use the current value for now, it will be adjusted for each SoCs in further patches. Aslo use the new field directly in the ag71xx_rx_packets and ag71xx_hard_start_xmit() functions and remove the ag71xx_desc_pktlen() helper. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39144 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix WD My Net N750 switch led cfgGabor Juhos2013-12-171-4/+4
| | | | | | | | | | | Now that the switch is working correctly I had the chance to actually test the LED config. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/4616/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39129 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: implement switch fix for WD My Net N750Gabor Juhos2013-12-171-0/+19
| | | | | | | | | | | | | | | The bootloader on the WD My Net N750 disables the ports on it's internal AR8327N switch by powering them down. The stock firmware then brings the ports back up again by starting the auto negotiation process on each port. This fix implements just that. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/4615/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39128 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: implement callback in mdio resetGabor Juhos2013-12-172-0/+5
| | | | | | | | | | | This enables us to add fixups to the board specific code for boards that require special treatment of PHYs on mdio bus reset. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> http://patchwork.openwrt.org/patch/4614/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39127 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: make ag71xx_mdio_platform_data visibleGabor Juhos2013-12-172-2/+4
| | | | | | | | | | | This enables us to modify the ag71xx_mdio_platform_data from within the board support files. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/4613/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39126 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: compute the RX buffer size from the maximum frame sizeGabor Juhos2013-12-172-3/+1
| | | | | | | | | | | | | | | | Currently, the AG71XX_RX_PKT_SIZE value limits the received frame size to 1514/1516 bytes with/without a VLAN header respectively. However the hardware limit is controlled by the value the AG71XX_REG_MAC_MFL register which contains the value of the max_frame_len field. Compute the RX buffer size from the max_frame_len field to get rid of the 1514/1516 byte limitation. Also remove the unused AG71XX_RX_PKT_SIZE definition. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39121 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: store RX buffer size in the ag71xx structGabor Juhos2013-12-172-6/+8
| | | | | | | | This allows to change the value dynamically. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39120 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: store maximum frame length in the ag71xx structGabor Juhos2013-12-172-2/+8
| | | | | | | | | This will allow to use different values for the different SoCs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39117 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ag71xx: use mdio bus name in ar7240_probe messagesGabor Juhos2013-12-171-4/+4
| | | | | | | | | | | | | | | The ar7240_probe function uses the network device name in the kernel log messages, however the name is not yet initialized when the ar7240_probe function is called. Use the mdio bus name in the messages to avoid ugly log lines like the following one: eth%d: Found an AR7240/AR9330 built-in switch Reported-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39116 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: ag71xx: use device name for debugfs entryGabor Juhos2013-12-171-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | The ag71xx debugfs code uses the network device name for the device specific debugfs directory. Since r38689 'ar71xx: ag71xx: fix a race involving netdev registration' the debugfs initialization happens before the ethernet device gets registered and the network device name contains 'eth%d' at this point. If the board setup code registers multiple ag71xx devices, the debugfs code tries to create the device specific dir with the same name which causes an error like this: eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] ag71xx: probe of ag71xx.0 failed with error -12 Use the device name for the debugfs directory to avoid the collisions. Also add an error message and change the return code if the debugfs_create_dir call fails. Reported-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39115 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add initial support for the Mikrotik RB911G/RB912UAG boardsGabor Juhos2013-12-161-0/+176
| | | | | | | | | It is only on RB911G-5HPnD and RB912UAG-5HPnD boards. The LEDs and the USB port is not working yet. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39102 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add NAND driver for the Mikrotik RB91x boardsGabor Juhos2013-12-161-0/+355
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39097 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rb2011: use board name from the hardware configGabor Juhos2013-12-161-6/+9
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39096 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rb2011: simplify setup codeGabor Juhos2013-12-161-16/+19
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39095 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rb2011: use the new RouterBOOT helpersGabor Juhos2013-12-161-46/+29
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39094 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rb95x: use the rb_get_wlan_data helperGabor Juhos2013-12-161-37/+14
| | | | | | | | Also remove unused RB_* defines. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39092 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add some RouterBOOT specific helper functionsGabor Juhos2013-12-162-0/+153
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39091 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rb95x: nuke rb95x_gpio_initGabor Juhos2013-12-161-6/+2
| | | | | | | | | Set up the chipselect GPIO directly in rb95x_nand_init instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39087 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for WD My Net N750Gabor Juhos2013-12-161-0/+196
| | | | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> [juhosg: use a separate patch for kernel changes] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39077 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the TL-WA901ND v3 boardGabor Juhos2013-12-151-1/+16
| | | | | | | | Based-on: http://patchwork.openwrt.org/patch/4506/ Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39073 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: move TL-WA801ND v2 setup codeGabor Juhos2013-12-152-47/+47
| | | | | | | | | | | | The TL-WA801ND v2 board has only one LAN port which makes it more similar to the TL-WR[78]50RE devices. Move the board setup code into the mach-tl-wax50re.c file. Based-on: http://patchwork.openwrt.org/patch/4506/ Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39072 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: refactor TL-WAx50RE setup codeGabor Juhos2013-12-151-4/+8
| | | | | | | | | | | This way it is a bit easier to add other TP-LINK devices based on the Atheros AP123 reference board with one LAN port. Based-on: http://patchwork.openwrt.org/patch/4506/ Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39071 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the TL-WA801ND v2 boardGabor Juhos2013-12-151-8/+46
| | | | | | | | | | | | | | Patch to add kernel support for the TP-LINK WA801ND v2 Signed-off-by: Jiri Pirko <jiri@resnulli.us> Patchwork: http://patchwork.openwrt.org/patch/4500/ [juhosg: - the TL-WA801ND v2 does not have a sliding switch, it uses a push button for WPS instead. Use the tl_mr3420v2_gpio_keys array to reflect that, - rename kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39063 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: merge initval and tx gain table updates, calibration fixesFelix Fietkau2013-12-081-0/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39001 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the TL-WR1043ND v2 boardGabor Juhos2013-11-291-0/+224
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38955 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: improve support for the My Net Wi-Fi Range Extender deviceGabor Juhos2013-11-291-4/+7
| | | | | | | | | | | | | | | | | | | | This patch improves support for the device considerably. 1. The wifi didn't work in the initial release. This was because the WMAC of the AR9340 is not connected to the antennas. (However, it can pick up wifi signals, if they are strong enough!) Instead there's a dedicated AR9300 chip on the same board, which works. 2. Ethernet throughput is improved. iperf shows that the hardware can sustain more than 200Mbit/s and no longer drops any packages when the link is under load. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4461/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38949 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Kernel support update tl-wr842n_v2 added missing usb ledGabor Juhos2013-11-291-1/+1
| | | | | | | | | | | Just a small oversight my part, added the support for the USB led Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4425/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38946 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add kernel support for the WR842N/ND v2Gabor Juhos2013-11-151-0/+22
| | | | | | | | | | | Patch to add kernel support for the TP-LINK WR842N/ND v2 Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4352/ [juhosg: refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38813 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 03:19:50 +0000