aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files
Commit message (Expand)AuthorAgeFilesLines
* ar71xx: add a generic GPIO latch driverGabor Juhos2014-02-222-0/+233
* ar71xx: rb91x: fix pll_1000 value for eth0 to avoid packet lossGabor Juhos2014-02-201-0/+1
* ar71xx: Add support for MikroTik RB951Ui-2HnDGabor Juhos2014-02-201-4/+75
* ar71xx: add kernel support for the TP-Link TL-WDR4900 v2.0 boardGabor Juhos2014-02-191-4/+27
* ar71xx: wpe72: set active_low flag for the reset buttonGabor Juhos2014-01-261-0/+1
* ar71xx: wp543: set active_low flag for the buttonsGabor Juhos2014-01-261-0/+2
* ar71xx: archer c7: define LEDs connected to the AR8327 switchGabor Juhos2014-01-251-0/+10
* ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boardsGabor Juhos2014-01-241-0/+6
* ar71xx: wp543: use KEY_RESET code for the sw4 buttonGabor Juhos2014-01-231-1/+1
* ar71xx: mynet-n750: define LEDs connected to the AR8327 switchGabor Juhos2014-01-211-0/+15
* ar71xx: tl-wr1043nd-v2: define LEDs connected to the AR8327 switchGabor Juhos2014-01-201-0/+10
* ar71xx: tl-wdr4300: define LEDs connected to the AR8327 switchGabor Juhos2014-01-201-0/+10
* ar71xx: rb2011: define LEDs connected to the AR8327 switchGabor Juhos2014-01-201-0/+16
* ar71xx: rb2011: fix eth5 LEDGabor Juhos2014-01-201-1/+1
* ar71xx: ag71xx: increase calculated max frame length valueGabor Juhos2014-01-111-1/+3
* ar71xx: my net n750: simplify LNA GPIO setupGabor Juhos2014-01-101-6/+2
* ar71xx: my net n600: simplify LNA GPIO setupGabor Juhos2014-01-101-6/+2
* ar71xx: Fix WD My Net N600 weak signal issueGabor Juhos2014-01-101-0/+15
* ar71xx: Fix WD My Net N750 weak signal issueGabor Juhos2014-01-101-2/+2
* ar71xx: fix max frame length of the QCA955x SoCsGabor Juhos2013-12-231-0/+11
* ar71xx: don't set builtin_switch flag for QCA9558Gabor Juhos2013-12-231-6/+1
* ar71xx: allow to use large ethernet frames on AR934x SoCsGabor Juhos2013-12-201-0/+4
* ar71xx: ag71xx: fix max frame length setup of the built-in switchesGabor Juhos2013-12-201-5/+12
* ar71xx: ag71xx: calculate max frame len register value from the MTUGabor Juhos2013-12-201-3/+15
* ar71xx: ag71xx: add ag71xx_max_frame_len() helperGabor Juhos2013-12-201-2/+8
* ar71xx: ag71xx: get max_frame_len and desc_pktlen_mask from platform dataGabor Juhos2013-12-203-2/+11
* ar71xx: ag71xx: store descriptor packet length mask in ag71xx structGabor Juhos2013-12-202-7/+5
* ar71xx: fix WD My Net N750 switch led cfgGabor Juhos2013-12-171-4/+4
* ar71xx: implement switch fix for WD My Net N750Gabor Juhos2013-12-171-0/+19
* ar71xx: implement callback in mdio resetGabor Juhos2013-12-172-0/+5
* ar71xx: make ag71xx_mdio_platform_data visibleGabor Juhos2013-12-172-2/+4
* ar71xx: ag71xx: compute the RX buffer size from the maximum frame sizeGabor Juhos2013-12-172-3/+1
* ar71xx: ag71xx: store RX buffer size in the ag71xx structGabor Juhos2013-12-172-6/+8
* ar71xx: ag71xx: store maximum frame length in the ag71xx structGabor Juhos2013-12-172-2/+8
* ar71xx: ag71xx: use mdio bus name in ar7240_probe messagesGabor Juhos2013-12-171-4/+4
* ag71xx: ag71xx: use device name for debugfs entryGabor Juhos2013-12-171-3/+7
* ar71xx: add initial support for the Mikrotik RB911G/RB912UAG boardsGabor Juhos2013-12-161-0/+176
* ar71xx: add NAND driver for the Mikrotik RB91x boardsGabor Juhos2013-12-161-0/+355
* ar71xx: rb2011: use board name from the hardware configGabor Juhos2013-12-161-6/+9
* ar71xx: rb2011: simplify setup codeGabor Juhos2013-12-161-16/+19
* ar71xx: rb2011: use the new RouterBOOT helpersGabor Juhos2013-12-161-46/+29
* ar71xx: rb95x: use the rb_get_wlan_data helperGabor Juhos2013-12-161-37/+14
* ar71xx: add some RouterBOOT specific helper functionsGabor Juhos2013-12-162-0/+153
* ar71xx: rb95x: nuke rb95x_gpio_initGabor Juhos2013-12-161-6/+2
* ar71xx: add kernel support for WD My Net N750Gabor Juhos2013-12-161-0/+196
* ar71xx: add kernel support for the TL-WA901ND v3 boardGabor Juhos2013-12-151-1/+16
* ar71xx: move TL-WA801ND v2 setup codeGabor Juhos2013-12-152-47/+47
* ar71xx: refactor TL-WAx50RE setup codeGabor Juhos2013-12-151-4/+8
* ar71xx: add kernel support for the TL-WA801ND v2 boardGabor Juhos2013-12-151-8/+46
* ath9k: merge initval and tx gain table updates, calibration fixesFelix Fietkau2013-12-081-0/+3