openwrt/upstream - upstream openwrt

	Commit message (Expand)	Author	Age	Files	Lines
*	ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positions	John Crispin	2015-03-15	1	-0/+1
*	ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boards	Gabor Juhos	2014-01-24	1	-0/+6
*	ar71xx: tl-wdr4300: define LEDs connected to the AR8327 switch	Gabor Juhos	2014-01-20	1	-0/+10
*	generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data	Gabor Juhos	2012-12-22	1	-1/+1
*	ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio	Gabor Juhos	2012-11-05	1	-4/+6
*	ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines	Gabor Juhos	2012-10-17	1	-18/+1
*	ar71xx: add support for TP-Link TL-WDR3600	Gabor Juhos	2012-08-22	1	-1/+2
*	ar71xx: add support for the TL-WDR4300 board	Gabor Juhos	2012-06-19	1	-0/+203

// SPDX-License-Identifier: GPL-2.0-only #include "ar9344.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { compatible = "aerohive,hiveap-121", "qca,ar9344"; model = "Aerohive HiveAP 121"; aliases { led-boot = &led_power_white; led-failsafe = &led_power_orange; led-running = &led_power_white; led-upgrade = &led_power_orange; label-mac-device = &eth0; }; chosen { bootargs = "console=ttyS0,9600"; }; keys { compatible = "gpio-keys"; reset { label = "Reset button"; linux,code = <KEY_RESTART>; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; leds { compatible = "gpio-leds"; led_power_orange: power_orange { label = "orange:power"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; led_power_white: power_white { label = "white:power"; gpios = <&gpio 21 GPIO_ACTIVE_LOW>; }; }; i2c { compatible = "i2c-gpio"; gpios = <&gpio 13 GPIO_ACTIVE_HIGH /* sda */ &gpio 12 GPIO_ACTIVE_HIGH /* scl */ >; #address-cells = <1>; #size-cells = <0>; tpm@29 { compatible = "atmel,at97sc3204t"; reg = <0x29>; }; }; }; &ref { clock-frequency = <40000000>; }; &uart { status = "okay"; }; &gpio { pinctrl-names = "default"; pinctrl-0 = <&jtag_disable_pins>; gpio_ext_lna0 { gpio-hog; gpios = <20 0>; output-low; line-name = "hiveap-121:ext:lna0"; }; gpio_ext_lna1 { gpio-hog; gpios = <19 0>; output-low; line-name = "hiveap-121:ext:lna1"; }; gpio_usb_power { gpio-hog; gpios = <15 0>; output-high; line-name = "hiveap-121:power:usb"; }; }; &usb { status = "okay"; }; &usb_phy { status = "okay"; }; &pcie { status = "okay"; wifi@0,0 { compatible = "pci168c,0030"; reg = <0x0000 0 0 0 0>; mtd-mac-address = <&hw_info 0x0>; mtd-mac-address-increment = <2>; }; }; &spi { status = "okay"; num-cs = <1>; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x80000>; read-only; }; partition@80000 { label = "u-boot-env"; reg = <0x80000 0x10000>; read-only; }; hw_info: partition@90000 { label = "hw-info"; reg = <0x90000 0x10000>; read-only; }; partition@a0000 { label = "boot-info"; reg = <0xa0000 0x10000>; read-only; }; partition@b0000 { label = "boot-sinfo"; reg = <0xb0000 0x10000>; read-only; }; }; }; }; &wmac { status = "okay"; mtd-mac-address = <&hw_info 0x0>; mtd-mac-address-increment = <1>; }; &nand { status = "okay"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot1"; reg = <0x0 0x400000>; read-only; }; partition@400000 { label = "u-boot-env1"; reg = <0x400000 0x400000>; read-only; }; partition@800000 { label = "kernel"; reg = <0x800000 0x500000>; }; partition@d00000 { label = "ubi"; reg = <0xd00000 0x6f00000>; }; partition@2e00000 { label = "wifi-info"; reg = <0x7c00000 0x400000>; read-only; }; }; }; &mdio0 { status = "okay"; phy0: ethernet-phy@0 { reg = <0>; }; }; &eth0 { status = "okay"; pll-data = <0x06000000 0x00000101 0x00001313>; mtd-mac-address = <&hw_info 0x0>; phy-mode = "rgmii-id"; phy-handle = <&phy0>; gmac-config { device = <&gmac>; rgmii-gmac0 = <1>; rxd-delay = <1>; rxdv-delay = <1>; }; };