aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: added support for TL-WA830RE V2John Crispin2014-07-135-0/+11
| | | | | | | | Corrected patch ath79 insted of auth79. Sorry. Signed-off-by: Fredrik Jonson <fredrik@famjonson.se> SVN-Revision: 41596
* ar71xx: nbg6716: extract ath10k wifi board.binJohn Crispin2014-07-101-0/+23
| | | | | | | | | | With help of this script the ath10k board.bin settings are loaded from flash and saved to the ath10k firmware directory. The driver reads it later in the boot process. Signed-off-by: André Valentin <avalentin@marcant.net> SVN-Revision: 41562
* ar71xx: Add support for MikroTik RouterBOARD SXT LiteJohn Crispin2014-07-013-0/+12
| | | | | | | | | | | | | | | | This patch adds support for the MikroTik RouterBOARD SXT Lite. The new RB911L series is also supported as a result. v2 of this patch fixes the wmac offset to match what is on the sticker. v3 refreshes the patch against r41148 and defines the power led as the status led in diag.sh v4 refreshes the patch against r41353 and fixes the patch path issue to make git am work correctly v5 selects the kernel config option in the mikrotik profile rather than in the main ar71xx config Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41450
* ar71xx: add support for EasyLink M150 and M-miniJohn Crispin2014-06-265-0/+29
| | | | | | | | | | | | | v3 refreshes the patch on trunk@41337 This patch adds support for the EasyLink EL-M150 and M-mini http://wiki.openwrt.org/toh/easylink/el-m150 http://wiki.openwrt.org/toh/easylink/el-m-mini Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 41348
* ar71xx: nbg6716: Enable procd nand sysupgrageJohn Crispin2014-06-261-0/+1
| | | | | | | | | This enables the procd nand upgrade for ZyXEL NBG 6716. Also the ubi config is cleaned up to match the wndr4300. Signed-off-by: André Valentin <avalentin@marcant.net> SVN-Revision: 41346
* ar71xx: Fixes for 951Ui-2HnD board supportJohn Crispin2014-06-183-0/+10
| | | | | | | | | | | WAN and LAN are swapped the wrong way around. This patch fixes that by adding the 951Ui-2HnD to ar71xx.sh and the relevant entry in 02_network. This patch also defines the ACT LED as the status LED in diag.sh. Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41255
* procd: various cleanups to /lib/upgrade/nand.shJohn Crispin2014-06-161-6/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41222
* ar71xx: add sysupgrade support for wndr4300John Crispin2014-06-111-0/+8
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41131
* ar71xx: add user-space support for HiWiFi HC6361 board.John Crispin2014-06-025-0/+13
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 40974
* ar71xx: add support to TP-LINK TL-WA730RE v1John Crispin2014-06-021-0/+3
| | | | | | | | | | The TL-WA730RE seems to be almost identical to TL-WA701ND, just that it comes without PoE and a stock-firmware claiming the device to be a "Range Extender". Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 40972
* ar71xx: fix board detection for TL-WA7510NJohn Crispin2014-06-021-1/+4
| | | | | | | | | Detect TL-WA7510N v1 by the board name as defined in mach-tl-wa901nd.c and add hardware ID to tplink_board_detect Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 40971
* ar71xx: enable sysupgrade on wnr2000-v3John Crispin2014-06-021-0/+1
| | | | | | | | tested, works. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 40970
* ar71xx: add support for dlink dir-615-e1John Crispin2014-06-026-0/+8
| | | | | | | | | | | | Dlink dir-615-e1 can use dir-600-a1's image, but the image can't be uploaded through dlink's normal firmware update web page. Add profile for dir-615-e1 so the generated image can be uploaded through the firmware update web page. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> SVN-Revision: 40969
* ar71xx: add sysupgrade support for OpenMesh OM2P-HSv2John Crispin2014-06-022-0/+3
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 40963
* ar71xx: add user-space support for OpenMesh OM2P-HSv2John Crispin2014-06-023-0/+5
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 40962
* ar71xx: add sysupgrade support for OpenMesh OM2Pv2John Crispin2014-06-021-0/+2
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 40957
* ar71xx: add user-space support for OpenMesh OM2Pv2John Crispin2014-06-024-0/+6
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 40956
* target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGCJohn Crispin2014-06-021-1/+1
| | | | | | | | | | | | | | | | | | | ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct var $# (=number of args) here. under normal conditions this had no impact, but we should at least correct it. the error was observable like this: root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh root@box:~ . /lib/upgrade/platform.sh root@box:~ . /lib/upgrade/common.sh root@box:~ platform_check_image /tmp/myfirmware.bin ash: bad number root@box:~ echo $? 0 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 40915
* ar71xx: add user-space support for the ZyXEL NBG6716 boardGabor Juhos2014-04-134-0/+21
| | | | | | | | | Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ [juhosg: use zyxel prefix in LED names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40500
* ar71xx: add default LED config for WiFi LEDs on the WNDR4300Gabor Juhos2014-04-121-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40476
* ar71xx: wndr4300: change 'orange' to 'amber' in LED color namesGabor Juhos2014-04-121-0/+4
| | | | | | | | | | | | The hardware manual says amber so change the color part of the LED names to reflect that. Also update the constant names. Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40473
* ar71xx: fix typos in TP-Link rssileds definitionGabor Juhos2014-04-121-2/+2
| | | | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/5109/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40472
* ar71xx: add rssileds for Ubiquiti XM boardsGabor Juhos2014-04-121-0/+9
| | | | | | | | | | | Adds support for the received signal strength indicator LEDs of the Bullet M, Nanostation M and Rocket M devices. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/5108/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40471
* /lib/functions.sh: move rarely used mtd and macaddr related functions to ↵Felix Fietkau2014-04-071-0/+1
| | | | | | | | /lib/functions/system.sh Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40411
* ar71xx: add support for the TP-LINK TL-WR841N/ND v9Felix Fietkau2014-04-075-0/+17
| | | | | | | | | | Everything seems to be working fine. Potential issues: * VLAN port IDs are reversed with regard to the numbers on the case. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 40400
* ar71xx: build image for TL-WDR4300v1 (IL)Gabor Juhos2014-03-271-0/+4
| | | | | | | | | | | The version of TL-WDR4300 sold in Israel comes with a different hardware id. Patch-by: Daniel <daniel@makrotopia.org> Patchwork: http://patchwork.openwrt.org/patch/5001/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40038
* ar71xx: add user space support for the Oolite v1 boardGabor Juhos2014-03-274-0/+11
| | | | | | | | | Patch-by: Lars Bøgild Thomsen <lth@cow.dk> Patchwork: http://patchwork.openwrt.org/patch/4922/ [juhosg: use correct board name in uci-defaults/02_network] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40033
* ar71xx: adjust ew-dorin platform for LAN+WAN setupFelix Fietkau2014-02-281-2/+3
| | | | | | Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> SVN-Revision: 39763
* ar71xx: fix failsafe acces on several devicesGabor Juhos2014-02-251-1/+35
| | | | | | | | | | | | | | The ar71xx platform always uses the eth0 interface to provide access to the device in failsafe mode. Due to this, failsafe access is broken on devices where the LAN ports are connected to the 'eth1' interface. Update the relevant script to correctly set the ifname variable for these devices. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39752
* ar71xx: define status LED for the RB91x boardsGabor Juhos2014-02-232-0/+18
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39705
* ar71xx: add user-space support for TP-Link TL-WDR4900 v2.0 boardGabor Juhos2014-02-195-2/+12
| | | | | | | | | | | Patch-by: TenNinjas <tenninjas@tenninjas.ca> Patchwork: http://patchwork.openwrt.org/patch/4849/ [juhosg: - use the Archer C7 specific LED setup instead of adding identical code] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39636
* ar71xx: dragino2: add missing sysupgrade support.Gabor Juhos2014-01-302-0/+4
| | | | | | | | | | | | | | The original dragino2 board support was missing some changes from the upstream svn repository (http://svn.dragino.com/dragino2) that supported sysupgrade. [juhosg: change subject] Signed-off-by: Karl Palsson <karlp@remake.is> Patchwork: http://patchwork.openwrt.org/patch/4801/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39429
* ar71xx: add sysupgrade support for the Compex boardsGabor Juhos2014-01-241-1/+24
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39390
* ar71xx: create wndr3700 network config from uci-defaultsLuka Perkov2014-01-233-97/+40
| | | | | | | | | Since that was the last configuration in defconfig directory we can drop the defconfig init script too. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 39373
* ar71xx: set default LED config for the RB2011* boardsGabor Juhos2014-01-201-0/+10
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39344
* ar71xx: set status_led for the RB2011* boardsGabor Juhos2014-01-201-0/+5
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39343
* ar71xx: fix indentation in diag.shGabor Juhos2014-01-201-3/+3
| | | | | | | | Replace the leading spaces with tabs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39342
* ar71xx: add userspace support for WD My Net N750Gabor Juhos2013-12-165-3/+19
| | | | | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> [juhosg: remove the image generation part until the ethernet switch issue is resolved] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39078
* ar71xx: add user-space support for the TP-Link TL-WA901ND v3 boardGabor Juhos2013-12-155-1/+8
| | | | | | | | Based-on: http://patchwork.openwrt.org/patch/4508/ Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39074
* ar71xx: add user space support for the TL-WA801ND v2Gabor Juhos2013-12-155-0/+11
| | | | | | | | | | Patch to add the user space support for the TL-WA801ND v2 Signed-off-by: Jiri Pirko <jiri@resnulli.us> Patchwork: http://patchwork.openwrt.org/patch/4501/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39064
* ar71xx: update Userspace support for the WA850/WA750Gabor Juhos2013-11-301-0/+12
| | | | | | | Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38969
* ar71xx: use cybertan_check_image for image verification on the WRT160NLGabor Juhos2013-11-301-8/+2
| | | | | | | | | That function provides a slightly improved sanity check than the currently used solution. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38967
* ar71xx: sysupgrade for My Net Wi-Fi Range ExtenderGabor Juhos2013-11-302-0/+30
| | | | | | | | | | | | | | | | | | | | This patch enables the convenient sysupgrade feature for WD's Wi-Fi Range Extender. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4341/ [juhosg: - rename 'mynet_rext_check_image' function to 'cybertan_check_image' and move that into platform.sh, - remove the the model specific 'platform_do_upgrade_mynet_rext' function, - drop the mynet-rext.sh script, - remove the image/Makefile change, - update commit message] [christian: - check all 8 bytes of the firmware/device magic] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38966
* ar71xx: add user-space support for the TL-WR1043ND v2 boardGabor Juhos2013-11-295-2/+9
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38956
* ar71xx: fix switch port map for the Sitecom WLR-8100Gabor Juhos2013-11-291-3/+3
| | | | | | | | | | | There was no way to determine a working config, because the switch (ar8337) was not working previously. Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Patchwork: http://patchwork.openwrt.org/patch/4470/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38953
* ar71xx: user space support update tl-wr842n_v2 add default led supportGabor Juhos2013-11-291-1/+10
| | | | | | | | | | Small update to uci_defaults/01_leds, to support the usb led Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4426/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38947
* ar71xx: add user space support for the TL-WR842N/ND v2Gabor Juhos2013-11-155-1/+8
| | | | | | | | | | Patch to add the user space support for the TL-WR842N/ND v2 Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4354/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38814
* ar71xx: wndr4300: set official mac addressesGabor Juhos2013-11-152-2/+15
| | | | | | | | | | | | | | | | | | Get the factory assigned mac addresses stored in the caldata partition and asign them to lan and wan interfaces. Also put the correct mac addresses into the WiFi eeprom files to ensure that the ath9k driver will use the correct ones. Signed-off-by: Stefan Agner <stefan@agner.ch> Patchwork: http://patchwork.openwrt.org/patch/4350/ [juhosg: - move WiFi MAC address setup to the firmware hotplug file, - use the official MAC address for the 2.4GHz as well, - remove uci-defaults.sh modifications, - update commit message] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38812
* ar71xx: Unifi AP Pro sysupgrade patchFelix Fietkau2013-11-141-0/+4
| | | | | | | | | | | | | | | | | | The current implementation of mtd will not append the backup file created by sysupgrade to the correct partition, as mtd will append the data to first jffs2 partition it finds. As the kernel is also stored on a jffs2 partition (which resides before the overlay partition), the data will be appended to this partition. To fix this problem, a new option -s <number> skip the first n bytes when appending data to the jffs2 partiton, defaults to "0" is added to mtd. Signed-off-by: Peter Wagner <tripolar@gmx.at> SVN-Revision: 38807
* ar71xx: add user space support for the TL-WA750RE/WA850RE Range extenderGabor Juhos2013-11-115-0/+32
| | | | | | | | | Patch to add user space support for the TL-WA750RE/WA850RE range extender Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38718
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-07 21:21:05 +0000