aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: add support for TRENDnet TEW-823DRUJohn Crispin2015-12-176-3/+13
| | | | | | | | | | | | | | Add support for TRENDnet TEW-823DRU: - cpu: QCA9558 @720MHz - flash: 16MB - ram: 256MB - 4+1 RJ45 100/1000Mbps - wifi: QCA9558 (bgn) and QCA9880-BR4A (ac) - 1x USB 2.0 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 47927
* ar71xx: Update merakinand.sh to fix sysupgradeFelix Fietkau2015-12-131-1/+0
| | | | | | | | | | Remove reliance on /lib/upgrade/nand.sh as this is called by sysupgrade, based on felix's comments at https://lists.openwrt.org/pipermail/openwrt-devel/2015-December/037963.html Signed-off-by: Chris R Blake <chrisrblake93@gmail.com> SVN-Revision: 47889
* ar71xx: add support for Cisco's MR18John Crispin2015-12-128-0/+191
| | | | | | | | | | | This patch adds support for Cisco's MR18. Detailed instructions for the flashing the device can be found in the OpenWrt forum thread: <https://forum.openwrt.org/viewtopic.php?id=59248> Signed-off-by: Chris R Blake <chrisrblake93@gmail.com> SVN-Revision: 47878
* all: drop old uci-defaults.shJo-Philipp Wich2015-12-113-3/+3
| | | | | | | | | Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one and update all users accordingly. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47867
* ar71xx: Add support for Wallys DR344John Crispin2015-12-114-0/+8
| | | | | | | | This patch is for Wallys DR344 support under OpenWRT Signed-off-by: Philippe Duchein <wireless-dev@duchein.net> SVN-Revision: 47847
* ar71xx: fix switch port mapping for tl-wdr4300/3600Felix Fietkau2015-12-061-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47799
* ar71xx: convert gpio switch config to board.dJo-Philipp Wich2015-12-042-25/+27
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47763
* all: remove redundant board.d/00_model filesJo-Philipp Wich2015-12-041-13/+0
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47753
* all: remove dummy ucidef_set_interface_loopback() from board.dJo-Philipp Wich2015-12-031-2/+0
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47744
* ar71xx: board.d: add missing include (#21296)Jo-Philipp Wich2015-12-031-0/+1
| | | | | | | | | Include /lib/functions/system.sh in 02_network to define missing mtd_get_mac_binary() procedure. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47723
* board.d: remove redundant ucidef_set_interfaces_lan_wan() callsJo-Philipp Wich2015-12-031-21/+0
| | | | | | | | | | This removes calls to ucidef_set_interfaces_lan_wan() and ucidef_set_interfaces_lan() on boards where all relevant info can be inferred from the switch definition. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47722
* board.d: merge ucidef_add_switch() and ucidef_add_switch_ports()Jo-Philipp Wich2015-12-031-87/+44
| | | | | | | | | | | | This changes uci-defaults-new.sh, config_generate and all relevant board.d files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into a single function. Also removes now superfluous enable and reset arguments. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47721
* base-files: uci-defaults-new: remove reset/enable args of ucidef_add_switch()Jo-Philipp Wich2015-12-031-1/+2
| | | | | | | | | | | | | | | Out of 69 switch definitions, only 3 pass something different than "1" as values for reset and enable, with one of those three being invalid. This change ... * removes the reset and enable arguments from ucidef_add_switch() * unconditionally writes reset:1 and enable:1 to JSON * converts the three users of nonstandard values to ucidef_add_switch_attr() Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47720
* ar71xx: record board id and model name in /etc/board.jsonJo-Philipp Wich2015-11-301-0/+13
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47672
* ar71xx: switch network and led defaults to board detection frameworkJo-Philipp Wich2015-11-262-102/+117
| | | | | | | | | Also translate ucidef_add_switch_vlan() to ucidef_add_switch_ports() for better switch topology mapping and improved default config generation. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47663
* Revert "ar71xx: migrate led and network setup to board detection framework"Jo-Philipp Wich2015-11-252-11/+10
| | | | | | | | The board detect code needs more fixes in order to work properly. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47641
* ar71xx: add GL-Domino Pi support V3John Crispin2015-11-244-0/+9
| | | | | | | | This is the patch for GL-Domino Pi V3. Updated against the latest trunk. Signed-off-by: alzhao<alzhao@gmail.com> SVN-Revision: 47622
* ar71xx: add GL-AR300 support V3John Crispin2015-11-244-0/+14
| | | | | | | | This is the patch for GL-AR300 V3, tested against the latest trunk. Signed-off-by: alzhao<alzhao@gmail.com> SVN-Revision: 47621
* ar71xx: add GL-AR150 support V3John Crispin2015-11-244-0/+9
| | | | | | | | This is the 3rd version. Modified against the latest trunk. Signed-off-by: alzhao<alzhao@gmail.com> SVN-Revision: 47620
* ar71xx: fix network default config of the TEW-732BRJo-Philipp Wich2015-11-221-0/+1
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47595
* ar71xx: add support for the devolo dLAN HotspotJohn Crispin2015-11-215-0/+12
| | | | | | Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> SVN-Revision: 47554
* ar71xx: fix AR71XX_MODEL on TP-Link TL-WR703NJohn Crispin2015-11-211-1/+1
| | | | | | | | | The hwid check was wrong, causing the AR71XX_MODEL value to end with a space (as $hwver was unset). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 47553
* ar71xx: fix wndr3700_board_detect for some NETGEAR WNDR3700v2 (again)Jo-Philipp Wich2015-11-201-5/+6
| | | | | | | | | | | | | | When fixing the model string for WNDR3700v2 which contain a model string followed by 0xff in r46455, the match for other versions of the WNDR3700v2 which just contain lots of 0xff broke (as the 0xff $model is checked for is stripped off). Fix by stripping off non-printable characters only for the actual output string, but not for the internal matching. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 47538
* ar71xx: migrate led and network setup to board detection frameworkJo-Philipp Wich2015-11-202-10/+11
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47534
* ar71xx: add Arduino YunHauke Mehrtens2015-11-104-0/+10
| | | | | | | | | | | | | | | | | | | This is based on patches from Federico Fissore <f.fissore@arduino.cc> especially this one: https://github.com/arduino/openwrt-yun/commit/7e2976fa83fb0d72a955574499178c387a1b3c92 The console is running with 250000 baud which is a non standard baud rate and needs an extra patch to be applied, I will try to get this patch upstream or something else which accomplish the same. Some upstream code looks like there are many different versions of this SoC, are these only internal versions and all versions on the consumer market are the same? I saw different GPIO configuration and flash sizes of 8MB and 16MB? Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47451
* ar71xx: add support for TP-LINK TL-WR941ND v6 (international version)Felix Fietkau2015-11-086-1/+17
| | | | | | | | | | | | | | | The international version is completely different from the already supported Chinese version. The WLAN of the QCA956x SoC used by this router has been fixed in r46948. This patch looks like it changes a lot in 700-MIPS-ath79-openwrt-machines.patch; that is not the case. Unfortunately, quilt decided to completely reorganize the Kconfig patch even though only a single section has been added. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 47420
* ar71xx: Add support for ZyXEL NBG6616.Felix Fietkau2015-11-076-6/+23
| | | | | | Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net> SVN-Revision: 47405
* ar71xx: Add Gainstrong MiniBox v1.0 support to trunkJohn Crispin2015-10-194-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch supersedes the v1 from September 17th. Bumping the patch version - the MiniBox profile showed up under M, but since it's called 'Gainstrong MiniBox v1.0' now it looks out of place. Renamed the profile to gs-minibox-v1.mk to fix that. The following patch adds support for the Gainstrong MiniBox into trunk (or 'Designated Driver' :D ). Fixed items: - Inverted LED polarity (OOLITE seems to suffer from the same problem). - Changed uppercase MINIBOX_V1_ prefix as requested. - Prefixes are now gs_minibox_ similar to gs_oolite_ (same vendor). - Mention the vendor (Gainstrong) in code headers. Compiles fine, has been confirmed working by owners on 15.05. Question: I've seen some boards use tools/firmware-utils/src/mktplinkfw.c, the MiniBox images build fine without, so I'm wondering: do I need to add it in there as well? Any added benefit? Thank you Signed-off by: Stijn Segers <francesco.borromini@inventati.org> SVN-Revision: 47234
* ar71xx: Bitmain Antminer S1 & S3 cleanupJohn Crispin2015-10-194-13/+21
| | | | | | | | | | | | Sets the LEDs to boardname:color:led-name Sets the LAN to eth0 Other corrections such as the Machine Name and HWIDs v2 corrects the profile names in the Makefile and changes tabs to spaces in the Makefile 'define Device/' like the other devices. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 47221
* ar71xx: Correct WeIO board nameJohn Crispin2015-10-051-1/+1
| | | | | | | | Trivial parch to correct WeIO board name in the system. Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com> SVN-Revision: 47110
* ar71xx: Add WeIO Board SupportFelix Fietkau2015-09-242-1/+5
| | | | | | | | | | Add support for WeIO board (http://we-io.net). This board is based on Carambola2 board form 8Devices. Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> [some cleanups] SVN-Revision: 47036
* ar71xx: add support for ap152 reference boardJohn Crispin2015-09-161-0/+3
| | | | | | Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> SVN-Revision: 46972
* ar71xx: uci-defaults: fix ap143 to appropriate groupJohn Crispin2015-09-161-1/+1
| | | | | | Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> SVN-Revision: 46970
* ar71xx: Add UBNT airGateway Pro supportJohn Crispin2015-09-165-2/+15
| | | | | | | | This patch adds kernel and userspace support for the Ubiquiti Networks airGateway Pro. Signed-off-by: Matthew Reeve <mreeve at tenxnetworks.com> SVN-Revision: 46961
* ar71xx: add TP-LINK TL-WDR3320 v2 supportJohn Crispin2015-09-145-0/+13
| | | | | | | | | | This patch adds support for TP-LINK TL-WDR3320 v2. This router uses a chinese version 2 firmware header,. Signed-off-by: Weijie Gao <hackpascal@gmail.com> SVN-Revision: 46934
* ar71xx: extract ath10k wifi board.bin for the OpenMesh MR1750 boardJohn Crispin2015-09-141-0/+4
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46933
* ar71xx: enable sysupgrade for the OpenMesh MR1750John Crispin2015-09-142-1/+8
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46929
* ar71xx: add user-space support for the OpenMesh MR1750 boardJohn Crispin2015-09-144-0/+13
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46927
* ar71xx: assign proper GPIO pin for Ubiquiti Nanostation modelsJohn Crispin2015-09-141-2/+2
| | | | | | | | | | | | | The GPIO pins for "POE passthrough" of Ubiquiti Nanostation models are the following: * Ubiquiti Nanostation M XM: Pin 8 * Ubiquiti Nanostation M XW: Pin 2 The previous definition of the pins was mixed up between XM and XW model. Signed-off-by: Lars Kruse <lists@sumpfralle.de> SVN-Revision: 46922
* target: ar71xx: add support for COMFAST CF-E316N v2 boardFelix Fietkau2015-09-114-0/+13
| | | | | | | | | | | | This adds full support (sans sysupgrading from vendor firmware) for the COMFAST CF-E316N v2 (aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0, no FCC ID) by Shenzhen Four Seas Global Link Network Technology Co., Ltd (this company is actively refusing to provide GPL'd sources for the OpenWrt version they ship with the device, damn them). Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 46852
* ar71xx: add support for TP-Link TL-WDR6500 v2John Crispin2015-08-176-1/+32
| | | | | | | | | | | Signed-off-by: Weijie Gao <hackpascal@gmail.com> This patch adds support for TP-Link TL-WDR6500 v2. The firmware has a U-Boot header for kernel, and a TP-LINK v2 header for the whole firmware, so I have to create a new firmware creation method. SVN-Revision: 46663
* ar71xx: Add support for Black SwiftJohn Crispin2015-08-175-0/+18
| | | | | | | | | | | | Add support for the Black Swift board: http://www.black-swift.com/ Took relevant parts and slightly adapted from: https://github.com/blackswift/openwrt/blob/master/bsb.patch Signed-off-by: Bruno Randolf <br1@einfach.org> SVN-Revision: 46651
* ar71xx: add support for Onion OmegaJohn Crispin2015-07-244-0/+11
| | | | | | | | | | | | This patch adds support for the Onion Omega. https://onion.io/omega Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: Boken Lin <bl@onion.io> Tested-by: Jacky Huang <huangfangcheng@163.com> SVN-Revision: 46458
* ar71xx: Add support for AP147-010 reference boardJohn Crispin2015-07-246-0/+24
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46457
* ar71xx: fix wndr3700_board_detect for some NETGEAR WNDR3700v2John Crispin2015-07-241-1/+1
| | | | | | | | | | | | | | | There are a few NETGEAR devices which don't terminate the model name in the ART with a NUL byte, at least some NETGEAR WNDR3700v2. The current awk expression doesn't match 0xFF bytes, so AR71XX_MODEL contains lots of trailing 0xFF garbage in this case. Fix this by matching for the first non-printable character and explicitly setting LC_CTYPE=C (probably not strictly necessary on OpenWrt, but will definitely work like this, even when awk supports locales and LANG is set). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 46455
* Revert "ar71xx: Add support for Cisco-Linksys WAP4410N" (r46250)Felix Fietkau2015-07-194-8/+0
| | | | | | | | The commit is incomplete, it does not even build the mach-* file This reverts commit 6e6adcf7a197b1802cb728ddcccf05f890ca0574 SVN-Revision: 46425
* ar71xx: Enable ath10k calibration data loading for EnGenius ESR1750 and EPG500.John Crispin2015-07-181-0/+5
| | | | | | | | | | As r46245 disabled the board.bin template workaround, 5GHz wifi stopped working on these devices. This adds them to the calibration data loading introduced in r46244 and thus makes 5GHz work again for these devices. Signed-off-by: Christian Beier <cb@shoutrlabs.com> SVN-Revision: 46415
* ar71xx: add support for the devolo dLAN pro 1200+ WiFi acJohn Crispin2015-07-146-0/+22
| | | | | | Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> SVN-Revision: 46342
* ar71xx: add support for the devolo dLAN pro 500 Wireless+John Crispin2015-07-145-0/+18
| | | | | | Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> SVN-Revision: 46338
* ar71xx: fix board name orderingJohn Crispin2015-07-082-4/+4
| | | | | | | | r46248 added case statements in the same places Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 46274
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-01 11:04:21 +0000