aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: switch to kmod-gpio-button-hotplugFelix Fietkau2012-02-201-4/+1
| | | | SVN-Revision: 30660
* ar71xx: add model detection for TL-WR842N/NDGabor Juhos2012-02-131-0/+3
| | | | SVN-Revision: 30507
* ar71xx: fix db120 board detectionFelix Fietkau2012-02-101-1/+1
| | | | SVN-Revision: 30408
* ar71xx: add support for the TRENDNet TEW-673GRU boardGabor Juhos2012-02-084-1/+9
| | | | SVN-Revision: 30376
* ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boardsGabor Juhos2012-01-311-0/+10
| | | | SVN-Revision: 29978
* ar71xx: fix ethernet LEDs on the DIR-600-A1 boardGabor Juhos2012-01-311-0/+1
| | | | SVN-Revision: 29975
* ar71xx: unify LED names on D-Link boardsGabor Juhos2012-01-312-13/+11
| | | | SVN-Revision: 29974
* ar71xx: support for D-LINK DIR-615 rev. E4Gabor Juhos2012-01-315-0/+16
| | | | | | | | | | | | | | | | | | | | This patch adds support for D-LINK DIR-615 E4 board. It's mostly based on the existing support for DIR-600 A1, with some changes in the leds configuration. It's an updated version of the patch that reliably works on my hw for about a year (it was built from trunk on Jan 2011). When I decided to update the firmware and checked for the current support for that device, I also found previously posted patches by Alexey Loukianov that mentioned some stability issues. I'm not sure where could be the difference, the patches are very similar except the wmac led pin number - I was using 1, and those patches used 17. [juhosg: add 3.2 support] Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com> SVN-Revision: 29973
* ar71xx: add support for TP-Link TL-MR11UGabor Juhos2012-01-314-0/+9
| | | | | | | | | | | | | | | | | | | Adds support for TL-MR11U, a portable router with very similar hardware to the TL-WR703N and TL-MR3020, but with an onboard 2000mAh battery. Tested, working: All interfaces (Ethernet, 802.11n, USB) WPS & Reset switches (Power appears to be a hardware slider) Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled) Sysupgrade [juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch breakage] Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com> SVN-Revision: 29972
* add support for the Atheros AP113 reference boardFlorian Fainelli2012-01-284-2/+10
| | | | | | | | | This reference board is equipped with: - AR7242 SoC - AR9580 on-board Wi-Fi - AR8316 switch SVN-Revision: 29935
* ar71xx: add support for Compex WPE72/WPE72NXGabor Juhos2012-01-262-1/+5
| | | | | | | | | | | This patch adds support for Compex WPE72 bare board and Compex WPE72NX Indoor Access Point. [juhosg: add support to 3.2 as well] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> SVN-Revision: 29912
* ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and ↵Gabor Juhos2012-01-252-1/+4
| | | | | | | | | | | | | | | | | | | | | modify LED behaviour This patch fixes the board detection of the TL-MR3020. The LED behaviour has also been modified: * The WPS LED is the diag LED now. * A netdev trigger for the LAN LED has been added. The profile of the TL-MR3020 has been updated because the needed package "kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev trigger for the 3G/USB LED. [juhosg: the board name changes has been removed, and the kernel files has been changed instead.] Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29905
* ar71xx: preset WLAN LED config on MZK-W300NHGabor Juhos2012-01-241-0/+4
| | | | SVN-Revision: 29896
* ar71xx: add initial support for the TL-WR2543N/ND boardGabor Juhos2012-01-075-1/+22
| | | | | | The WLAN LEDs are not working yet. SVN-Revision: 29680
* ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boardsGabor Juhos2012-01-061-0/+1
| | | | SVN-Revision: 29672
* ar71xx: add support for Redwave RW2458NGabor Juhos2012-01-063-0/+7
| | | | | | Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29669
* ar71xx: fix RB-750 network configurationGabor Juhos2012-01-061-1/+1
| | | | SVN-Revision: 29668
* ar71xx: fix LED configuration on the RB-750Gabor Juhos2012-01-051-1/+5
| | | | SVN-Revision: 29666
* ar71xx: add inital support for the ALFA Network AP96 boardGabor Juhos2012-01-043-1/+6
| | | | | | | | The microSD slot and the Real Time Clock is not working yet. The miniPCIe interface is not tested due to the lack of a suitable card. SVN-Revision: 29662
* ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7Gabor Juhos2012-01-043-0/+5
| | | | | | | These models are based on the AP99 reference board, and uses the AR7241 SoC. SVN-Revision: 29658
* ar71xx: show correct model name on TL-WA701N/ND boardsGabor Juhos2012-01-041-0/+3
| | | | SVN-Revision: 29657
* ar71xx: fix network configuration for the TL-WA901N/ND boardsGabor Juhos2012-01-041-5/+1
| | | | SVN-Revision: 29654
* ar71xx: allow to use LAN LED on the TL-WA901N/ND boardsGabor Juhos2012-01-041-0/+4
| | | | SVN-Revision: 29653
* ar71xx: add default LED configuration for the TL-MR3020Gabor Juhos2012-01-042-0/+6
| | | | | | Also use the system LED for diagnostic. SVN-Revision: 29652
* ar71xx: add support for TP-Link TL-MR3020Gabor Juhos2012-01-043-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the TP-Link device TL-MR3020 which is very similiar to the TL-WR703N. The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions. Only four LEDs can be controlled via GPIO. The power LED is connected to the power supply. The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals of the sliding switch have been mapped to BTN_0 and BTN_1. I have also setup a wiki page with details here: http://wiki.openwrt.org/toh/tp-link/tl-mr3020 USB is working and has been tested with USB mass storage and USB UMTS stick. Wifi also seems to work. Ethernet is working too. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29651
* ar71xx: add support for the ALFA Network N2/N5 boardsGabor Juhos2012-01-015-0/+13
| | | | SVN-Revision: 29635
* ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boardsGabor Juhos2011-12-311-1/+35
| | | | SVN-Revision: 29631
* ar71xx: fix LEDs on the WRT400NGabor Juhos2011-12-311-1/+1
| | | | SVN-Revision: 29624
* ar71xx: enable sysupgrade support for airrouterGabor Juhos2011-12-271-0/+1
| | | | | | | | Works for me! ;-) Patch-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 29614
* ar71xx: fix sysupgrade on PB42/PB44 boardsGabor Juhos2011-12-271-2/+4
| | | | SVN-Revision: 29613
* ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450HJonas Gorski2011-12-211-0/+8
| | | | | | Thanks netprince for reporting and testing. SVN-Revision: 29595
* ar71xx: add support for the wzr-hp-g300nh2Felix Fietkau2011-12-183-0/+7
| | | | | | Signed-off-by: Mark Deneen <mdeneen@gmail.com> SVN-Revision: 29567
* ar71xx: connect GMAC0 to the internal switch on DB120Gabor Juhos2011-12-151-0/+6
| | | | | | | | Because the external switch has no driver yet, connect GMAC0 to the PHY4 of the internal switch for now. This allows to use the DB120 board as a router with 4LAN+1WAN ports. SVN-Revision: 29557
* ar71xx: add support for ALFA Network's Hornet-UB boardGabor Juhos2011-12-144-0/+14
| | | | SVN-Revision: 29535
* ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2Gabor Juhos2011-12-131-1/+1
| | | | | | | | | | | | | | | | | | | The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case. The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or switch ports 2-4. The stock firmware uses a single LED (in the 5GHz position) to indicate the status of both radios, and a single LED (in the switch port 1 position) to indicate the status of all LAN ports. The "missing" LEDs are present on the board, and easily shine through the case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs. I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume that this is sufficient to build a fully-functional image. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29513
* ar71xx: fix WNDR3x00 model detectionGabor Juhos2011-12-071-14/+17
| | | | | | | | | | | | | | | | | | | | Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset 56 in the art (caldata) mtd partition. r29434 redid WNDR3x00 model detection, attempting to distinguish between WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it contained a bug: it put the awk inside a $(...), with the result that all WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch checks the model name stored in the art partition, as is done by U-Boot shipping on the WNDR3800. It has the likely advantage of working with future models based on the WNDR3700 board. It also will not mis-detect units on which people install more memory. I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29472
* ar71xx: add TP-Link board detectionGabor Juhos2011-12-051-1/+54
| | | | SVN-Revision: 29459
* ar71xx: verify hardware id of firmware images on TP-Link boardsGabor Juhos2011-12-052-0/+26
| | | | SVN-Revision: 29455
* ar71xx: add preliminary support for wzr-hp-g450hFelix Fietkau2011-12-052-0/+4
| | | | SVN-Revision: 29441
* ar71xx: rewrite WNDR3700/3800 handlingGabor Juhos2011-12-056-159/+51
| | | | SVN-Revision: 29434
* add some missing wndr3800 base-files definitionsJo-Philipp Wich2011-12-053-2/+72
| | | | SVN-Revision: 29433
* ar71xx: change user-space board detectionGabor Juhos2011-12-052-6/+25
| | | | SVN-Revision: 29432
* ar71xx: add support for Ubiquiti AirRouterGabor Juhos2011-12-012-0/+4
| | | | | | Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu> SVN-Revision: 29395
* ar71xx: configure default led behavior for the OM2PGabor Juhos2011-12-011-0/+5
| | | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 29394
* ar71xx: use /lib/functions/uci-defaults.shGabor Juhos2011-12-011-124/+49
| | | | SVN-Revision: 29385
* ar71xx: fix wndr3800 machine nameGabor Juhos2011-11-242-1/+4
| | | | | | | | This fixes the machine name in /proc/cpuinfo and luci status page machine name. Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com> SVN-Revision: 29326
* ar71xx: add diag support for the DB120 boardGabor Juhos2011-11-122-0/+6
| | | | SVN-Revision: 28975
* ar71xx: generate ubootenv from uci-defaults instead of providing defconfigGabor Juhos2011-11-122-5/+37
| | | | | | | | | | I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is indeed much nicer. So I moved over ubootenv from having a defconfig-entry to also be generated from uci-defaults. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28971
* ar71xx: create TL-WA901ND network config from uci-defaultsGabor Juhos2011-11-072-16/+5
| | | | SVN-Revision: 28833
* ar71xx: create ALL0258N network config from uci-defaultsGabor Juhos2011-11-072-12/+4
| | | | SVN-Revision: 28832
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 12:30:52 +0000