aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: Configure WNDR3700 switch LED colors properly (#8103)Felix Fietkau2010-11-041-10/+8
| | | | | | | | | | | For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on the four LAN port switch LEDs. The LEDs will be lit to indicate a link and will blink to indicate activity. This matches the stock firmware and the description printed on the label on the unit's underside. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23879 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)" on ↵Felix Fietkau2010-11-041-15/+3
| | | | | | submitter's request git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23878 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)Felix Fietkau2010-11-041-3/+15
| | | | | | | | | | | Make the WiFi LEDs blink for activity on the WNDR3700, matching the stock firmware and user expectations. The green 2.4GHz and blue 5GHz LEDs will illuminate with the radio on, and will blink to indicate transmission and reception. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23877 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new ↵Felix Fietkau2010-10-141-5/+9
| | | | | | switch driver git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23439 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563)Felix Fietkau2010-10-141-5/+9
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23432 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: initial support for jjPlus JWAP003Gabor Juhos2010-10-012-0/+19
| | | | | | | | | Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> (the GPIODEV code has been removed, the sysfs interface can be used to control the GPIO lines instead - juhosg) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23165 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the TL-MR3420 v1 boardGabor Juhos2010-09-273-1/+7
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23136 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add support for Atheros AP96 reference boardFelix Fietkau2010-09-273-0/+22
| | | | | | | | | | | | This is still preliminary and not really tested much. Anyway, this version seems to be enough to get both wired and wireless interfaces working. Buttons and leds are also working. mach-ap96.c is based on mach-wndr3700.c. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boardsGabor Juhos2010-09-035-0/+70
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22882 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add a new driver for the ar7240 switch using swconfig.Felix Fietkau2010-08-161-5/+9
| | | | | | | | hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22675 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add eap7660d board to diag.sh and sysupgradeGabor Juhos2010-08-142-2/+5
| | | | | | | | This patch adds support for the Senao EAP7660D board to diag.sh and sysupgrade. Signed-off-by: Daniel Golle <daniel.golle@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22644 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux/ar71xx: add nanostation-m signature (thanks Antonio Anselmi)Alexandros C. Couloumbis2010-08-141-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22631 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] add uci-defaults script to migrate vlan 0 to vlan 1 after ↵Jo-Philipp Wich2010-08-131-0/+13
| | | | | | sysupgrade on devices using the RTL8366s switch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22625 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix sysupgrade on the ubnt nanostation mFelix Fietkau2010-07-231-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22370 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter ↵Felix Fietkau2010-07-224-1/+23
| | | | | | "Fate" Hollants, from #7528, without the ethernet fifo cfg values) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22353 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx] fix dir-825-b1 default network config after r21905Jo-Philipp Wich2010-07-011-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22005 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: don't use vlan 0 for devices with rtl8366s switchGabor Juhos2010-06-262-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21905 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the Senao EAP7660D boardGabor Juhos2010-06-182-0/+15
| | | | | | | | | This patch adds support for the Senao EAP7660D board to trunk. Signed-off-by: Daniel Golle <daniel.golle@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21837 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix RB750 LED configurationGabor Juhos2010-06-171-2/+2
| | | | | | | Patch-by: Ray Bellis git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21826 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add default network config for the RB433UAH boardGabor Juhos2010-06-121-0/+26
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21765 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add default network configuration file for the RB450/RB433 boardsGabor Juhos2010-06-082-0/+52
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21730 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Added preinit scriptlet to set vars based on cpuinfo during ↵Daniel Dickinson2010-05-301-0/+7
| | | | | | preinit_main. This fixes a bug in which the vars were not set due to /proc not being mounted when ar71xx.sh was sourced git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21634 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Make wget2nand fail if copying the kernel fails and use the correct ↵Gabor Juhos2010-05-141-2/+5
| | | | | | | | | | | | | | | file extension for the rootfs image wget2nand didnt check the exit status after copying the kernel, if the copying failed for some reason ( for example not enougs space on the kernel partition) it simply continued extracting the rootfs. I also changed the filename, which wget2nand trys to download ( .tar.gz instead of .tgz ). Signed-off-by: Marko Foerster <mrkfoerster@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21444 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boardsGabor Juhos2010-04-092-0/+36
| | | | | | | Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20752 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [PATCH 1/2] Add support for the ar8316 switch.Jo-Philipp Wich2010-04-052-0/+36
| | | | | | | | | | | | | This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices. [PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g. Add the ar8216 driver to the ar71xx target, and add network configurations for the RouterStation Pro and the RouterBoard RB-450G. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20722 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add uci defaults to fix trx header on the WRT160NL boardsGabor Juhos2010-03-271-0/+16
| | | | | | | * patch by Otto Solares git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20526 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add basic WLAN LED control to TL-WR1043NDGabor Juhos2010-03-251-0/+22
| | | | | | | | * thanks to KillaB * closes #6834 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20415 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix defconfig script to work with ImageBuilderGabor Juhos2010-03-151-2/+2
| | | | | | | * patch from #5722 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20231 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: don't break the existing network configuration in the wget2nand scriptGabor Juhos2010-03-151-4/+0
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20228 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix sysupgrade on the LS-SR71 boardGabor Juhos2010-03-101-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20119 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add default network configuration for the PB44 boardGabor Juhos2010-03-091-0/+16
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20099 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add uci-defaults for the RB750 boardGabor Juhos2010-03-091-0/+52
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20097 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: override lan port names on the RB750Gabor Juhos2010-03-091-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20096 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: improve wget2nand scriptGabor Juhos2010-03-091-28/+41
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20094 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add missing protocol definitions to default network configurationsGabor Juhos2010-03-095-0/+5
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20091 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add preliminary support for the RouterBOARD 750Gabor Juhos2010-03-072-0/+22
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20029 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix sysupgrade on the WRT400N (thanks to chuljin)Gabor Juhos2010-03-051-1/+1
| | | | | | | * closes #6782 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20006 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix status led detection on the RB4xx boardsGabor Juhos2010-03-052-4/+16
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20005 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add default network configuration file for the TL-WR741ND boardGabor Juhos2010-03-011-0/+19
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19930 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add default network configuration file for the DIR-600 rev. A1 boardGabor Juhos2010-03-011-0/+19
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19929 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add default network configuration file for the TL-WR1043ND boardGabor Juhos2010-02-241-0/+31
| | | | | | | Thanks to Andrew Tarabaras. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19840 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use the correct name for the status LED on the WRT400 boardGabor Juhos2010-02-241-1/+1
| | | | | | | (thanks to chuljin, patch from #6734) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19831 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: update default network configuration file for the WNDR3700Gabor Juhos2010-02-241-0/+45
| | | | | | | Signed-off-by: Scott Dudley <spmsink@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19830 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add uci configuration for the WAN LED on the WNDR3700Gabor Juhos2010-02-191-0/+22
| | | | | | | Based on a patch by Scott Dudley <spmsink@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19746 3c298f89-4303-0410-b956-a3cf2f4a3e73
* preinit: fix mixup between led and reset button enable on some platforms ↵Felix Fietkau2010-01-281-2/+2
| | | | | | (thx, cshore) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19370 3c298f89-4303-0410-b956-a3cf2f4a3e73
* add preinit modularization work by Daniel Dickinson (cshore)Felix Fietkau2010-01-253-18/+33
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19331 3c298f89-4303-0410-b956-a3cf2f4a3e73
* rtl8366_smi: move RTL8366S driver into a separate fileGabor Juhos2010-01-223-6/+6
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19279 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: change failsafe messageGabor Juhos2010-01-181-1/+1
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19221 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: update default network configuration for the WNDR3700/DIR-825-B1Gabor Juhos2010-01-183-26/+20
| | | | | | | | Also drop the default network configuration of the TL-WR1043ND, because the RTL8366RB switch is not yet supported by the rtl8366-smi driver. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19217 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add some default configs for rtl8366 based devicesFelix Fietkau2010-01-182-0/+52
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19210 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-20 05:52:59 +0000