aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/apm821xx
Commit message (Collapse)AuthorAgeFilesLines
* apm821xx: WNDR4700: utilize ath9k nvmem-cellsChristian Lamparter2022-02-042-49/+23
| | | | | | | | | the WNDR4700 can fetch its calibration data and mac-addresses directly from the "wifi_data" partition. This allows us to get rid of the 10-ath9k-eeprom file for the apm821xx target completely. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: convert legacy nand partition layoutChristian Lamparter2022-02-045-31/+45
| | | | | | | | in order to get nvmem-cells to work on AP and routers (Netgears WNDR4700). The nvmem-cell needs to be within a fixed-partition dt-node. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: WNDR4700: delete dead dt definitionsChristian Lamparter2022-02-041-2/+0
| | | | | | cooling-{min|max}-level are no longer used. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* build: move Build/copy-file to image-commands.mkChristian Lamparter2022-01-151-4/+0
| | | | | | This is makro is present in more than one place. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.10 to 5.10.90Rui Salvaterra2022-01-071-1/+1
| | | | | | | | Add and enable a new kconfig knob to disable unprivileged eBPF by default. Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.88Rui Salvaterra2021-12-271-1/+1
| | | | | | | | | Deleted (upstreamed): mpc85xx/patches-5.10/002-powerpc-85xx-fix-oops-when-CONFIG_FSL_PMC-n.patch [1] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.88&id=151ffac3ac277ad7c2a5f201b566b56d97ed3a99 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* apm821xx: remove broken PCIe MSI supportChristian Lamparter2021-12-275-41/+0
| | | | | | | | These never worked and upstream is in the process of removing them as well. Legacy PCI interrupt signaling is still working as before. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: remove overlapping partitionsChristian Lamparter2021-12-271-26/+17
| | | | | | | | Apart from the dtb partition, these were all "read-only;" they serve no purpose other than being a copy of what netgear had defined in their original firmware. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: fix WD MyBook Live DUO USB-PortChristian Lamparter2021-12-272-1/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | where to begin? the USB regulator settings were just a part of the issue. With them changed, according to the forum it still failed when a USB device was connected to the port with: dwc2 4bff80000.usbotg: dwc2_restore_global_registers: no global registers to restore dwc2 4bff80000.usbotg: dwc2_exit_partial_power_down: failed to restore registers dwc2 4bff80000.usbotg: exit partial_power_down failed dwc2 4bff80000.usbotg: HC died; cleaning up One clue was found upstream in commit cc10ce0c51b1 ("usb: dwc2: disable power_down on Amlogic devices") |Disable power_down by setting the parameter to |DWC2_POWER_DOWN_PARAM_NONE. This fixes a problem on various Amlogic |Meson SoCs where USB devices are only recognized when plugged in before |booting Linux. A hot-plugged USB device was not detected even though the |device got power (my USB thumb drive for example has an LED which lit |up). |[...] the same method proposed there worked with APM821xx's USB IP-Core. Link: https://forum.openwrt.org/t/wd-my-book-duo-usb/111926/2 Reported-by: thwe and takimata (openwrt forum) Fixes: b70d3557e05 ("apm821xx: clean up gpio-hogs") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: drop 5.4 config and patchesChristian Lamparter2021-12-2711-1956/+0
| | | | Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: 5.10: consolidate mac80211 crypto optionsSergey Ryazanov2021-12-171-2/+0
| | | | | | | | | | | | | | | | | | | | | | Each of - CRYPTO_AEAD2 - CRYPTO_AEAD - CRYPTO_GF128MUL - CRYPTO_GHASH - CRYPTO_HASH2 - CRYPTO_HASH - CRYPTO_MANAGER2 - CRYPTO_MANAGER - CRYPTO_NULL2 either directly required for mac80211 crypto support, or directly selected by such options. Support for the mac80211 crypto was enabled in the generic config since c7182123b9 ("kernel: make cryptoapi support needed by mac80211 built-in"). So move the above options from the target configs to the generic config to make it clear why do we need them. CC: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: bump 5.4 to 5.4.161John Audia2021-11-282-6/+6
| | | | | | | | | | | | | | | Removed upstreamed: ath79/patches-5.4/921-serial-core-add-support-for-boot-console-with-arbitr.patch[1] Manually rebased: layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All other patches automatically rebased. 1. Private email exchange with patch author, Hauke Mehrtens Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.80Rui Salvaterra2021-11-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch [1] bcm53xx/patches-5.10/033-v5.15-0012-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch [2] lantiq/patches-5.10/0016-mtd-rawnand-xway-Keep-the-driver-compatible-with-on-.patch [3] lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch [4] lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch [5] lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch [6] Manually rebased: ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=47462c5e600fbaffd755cd13dedd80d04e41ff83 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=2fde76df1885a6bec04317e457121326070450eb [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=9b366f5221d8aa64b22f35be137a5749326444ce [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=5af57ce8a6155fe3e4270d28d171abf8903bebc0 [5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=b92a5df2c7adc79a57481445f67de0c1c716581f [6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=6b72caabc47011d03f44064452b2c65e8ed18326 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* apm821xx: MBL: MR24: fetch IP address over dhcp by defaultChristian Lamparter2021-11-011-1/+1
| | | | | | | | This patch changes the default network configuration to fetch the IP addresses over dhcp instead of being statically assigned. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.10 to 5.10.76Rui Salvaterra2021-10-301-1/+1
| | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0145-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch [1] Manually rebased: bcm27xx/patches-5.10/950-0355-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch Note: although automatically rebaseable, the last patch has been edited to avoid conflicting bit definitions. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=b6f32897af190d4716412e156ee0abcc16e4f1e5 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* apm821xx: WNDAP6X0: add missed uci-default for compatChristian Lamparter2021-10-221-1/+3
| | | | | | | | This should have been included in the previous patch that resized the kernel partition to fit bigger kernels. Fixes: 7a6a3494450c ("apm821xx: WNDAP620 + WNDAP660: reorganize partitions for 5.10") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: implement new LED label naming schemeChristian Lamparter2021-10-2210-122/+273
| | | | | | | | | | | | | | | | | | | | | | | This patch updates all current APM82181 devices over to that "new LED naming scheme". This includes many updates to the device-tree: - dropped the deprecated, but beloved "label" property. - rename all DT leds node names to led-#. - add function and color properties. - utilized panic-indicator property. - dropped led- aliases (see below). migration scripts for all devices are included. For more information. See: <https://www.kernel.org/doc/html/latest/leds/leds-class.html> For the future: It looks like the color+function properties won over the dt-alias / label. This will need to be wired up into openwrt eventually. For APM821xx the situation is that all devices have a dedicated power and fault indicator. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: MX60(W): re-enable + allow bigger future kernelsChristian Lamparter2021-10-222-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MX60's kernel is limited to 0x3EFC00 by the values in mkmerakifw.c. Since the initramfs method of loading the kernel seems to be working, this patch does away with the use of the mkmerakifw tool for the MX60(W). But this will go along with a change in u-boot as well. So before you upgrade, please attach the serial cable and perform: | setenv owrt510_boot run meraki_ubi owrt_bootargs\; run owrt_load1 owrt_bootkernel\; run owrt_load2 owrt_bootkernel | setenv bootcmd run owrt510_boot | saveenv Note: You won't be able to use older OpenWrt releases without switching the bootcmd back to owrt_boot! Note2: We are no longer compatible with older OpenWrt MX60 installs. the legacy BOARD_NAME and SUPPORTED_DEVICES can be dropped. This is because upgrades from older images are not possible without uboot env changes anymore. Also the bogus BLOCKSIZE value (which was set to 63k back then, in order to get the kernel properly aligned after the fdt + meraki header) can be set to the NANDs real value. The FDT size (which was needed for alignment) can now be slimmed down as well. Co-developed-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: MBL: HDD regulators overhaul for MBL DUOChristian Lamparter2021-10-221-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Takimata reported on the OpenWrt forum in thread [0], that his MyBook Live Duo wasn't booting OpenWrt 21.02 after upgrading from the previous OpenWrt 19.07. The last logged entries on his console |[ 0.531599] sata1-regulator GPIO handle specifies active low - ignored |[ 0.538391] sata0-regulator GPIO handle specifies active low - ignored |[ 0.759791] ata2: SATA link down (SStatus 0 SControl 300) |[ 0.765251] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |[ 5.909555] ata1.00: qc timeout (cmd 0xec) |[ 5.913656] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) |[ 6.231757] ata1: SATA link down (SStatus 0 SControl 300) This extract clearly showed that the HDD on which OpenWrt is installed, simply disappeared after the SATA power regulators had been initialized. The reason why this worked with OpenWrt 19.07 was because the kernel config symbol CONFIG_REGULATOR=y was not set in the target's config-4.14. (This shows that the MBL Single does differ from the DUO in that it does not have programmable power regulators for the HDDs.) [0] <https://forum.openwrt.org/t/21-02-0-and-snapshot-fail-to-boot-on-my-book-live-duo/106585> Reported-by: Takimata (forum) Tested-by: Takimata (forum) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.10 to 5.10.75Rui Salvaterra2021-10-211-1/+1
| | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0735-xhci-guard-accesses-to-ep_state-in-xhci_endpoint_res.patch [1] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=dc3e0a20dbb9dbaa22f4a33dea34230f8c663c40 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.155John Audia2021-10-212-6/+6
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* apm821xx: disable and move kernel CONFIG_ symbolsChristian Lamparter2021-10-102-31/+17
| | | | | | | | | | | | | | | | | try to reduce the kernel size by disabling and moving options from the common kernel configuration to the SATA target that doesn't have the constraints. For NAND this has become necessary because as with 5.10 some devices outgrew their kernels. Though, in my tests this didn't help much: just a smidgen over 100kib was saved on the uncompressed kernel. ... running make kernel_oldconfig also removed some other config symbols, mostly those that already set from elsewhere or became obsolete in the meantime. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: disable MX60(W) due to kernel sizeChristian Lamparter2021-10-101-0/+1
| | | | | | | | disables the MX60(W) from being built by the builders for now. But there's an effort to bring it back: <https://github.com/openwrt/openwrt/pull/4617> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: WNDAP620 + WNDAP660: reorganize partitions for 5.10Christian Lamparter2021-10-102-6/+9
| | | | | | | | | | | | | | | | | | | | | | Due to 5.10 increased kernel size, the current 4MiB-ish kernel partition got too small. Luckily, netgear's uboot environment is setup to read 0x60000 bytes from the kernel partition location. ... While at it: also do some cleanups in the DTS in there. The original (re-)installation described in commit d82d84694e60 ("apm821xx: add support for the Netgear WNDAP620 and WNDAP660") seemed to be still working for now. What I noticed though is that the bigger initramfs images needed to use a different destination address (1000000) to prevent it overwriting itself during decompression. i.e: # tftp 1000000 openwrt-...-wndap620-initramfs-kernel.bin # bootm However, in case of the WNDAP620+660 the factory.img image can be written directly to the flash through uboot. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: switch to Kernel 5.10Paul Spooren2021-10-101-2/+1
| | | | Signed-off-by: Paul Spooren <mail@aparcar.org>
* apm821xx: move CONFIG_DMA* to the generic apm821xx configChristian Lamparter2021-10-103-31/+8
| | | | | | | | | | | | Both NAND and SATA targets need the DMA engine in one way or another. Due to a kernel config refresh various existing symbols got removed from the apm821xx main config file as well. (That being said, they are still included because the built-in crpyto4xx depends on these.) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.4 to 5.4.145John Audia2021-09-131-1/+1
| | | | | | | | | | | | Removed upstreamed: generic-backport/040-ARM-8918-2-only-build-return_address-if-needed.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.64John Audia2021-09-131-1/+1
| | | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800 Run-tested: bcm2711/RPi4B, ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.136John Audia2021-07-311-1/+1
| | | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.54Rui Salvaterra2021-07-291-1/+1
| | | | | | | Deleted (upstreamed) patches: mediatek/patches-5.10/000-spi-fix-fifo.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* apm821xx: move CONFIG_REGULATOR to target configDavid Bauer2021-06-133-1/+2
| | | | | | | | | | | | This moves CONFIG_REGULATOR to the target config instead of the subtarget config. For kernel 5.10, CONFIG_AT803X_PHY depends on CONFIG_REGULATOR. As we do not have a size constraint, move this symbol to the target configuration for kernel 5.4 as well as 5.10. Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: David Bauer <mail@david-bauer.net>
* apm821xx: MR24: Change default config of WLAN LEDTan Zien2021-05-231-4/+4
| | | | | | | | | | | | The previous config will only show 2.4G radio activity status This change mr24:green:wifi4 and mr24:green:wifi2 to show 2.4G and 5G radio on and off status change mr24:green:wifi3 and mr24:green:wifi1 to show 2.4G and 5G radio activity status Signed-off-by: Tan Zien <nabsdh9@gmail.com>
* kernel: bump 5.4 to 5.4.120John Audia2021-05-232-5/+5
| | | | | | | | | | | | | | | Removed upstreamed: generic/pending-5.4/770-02-net-ethernet-mtk_eth_soc-fix-rx-vlan-offload.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Note that since I rebased the previous commit, I removed my Run-tested line although I confirm building the image successfully. Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.118John Audia2021-05-231-1/+1
| | | | | | | | | | | | | | | | | | Manually rebased: ath79/patches-5.4/0033-spi-ath79-drop-pdata-support.patch Removed uneeded patch: ath79/patches-5.4/0050-spi-ath79-remove-spi-master-setup-and-cleanup-assign.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.38Rui Salvaterra2021-05-221-1/+1
| | | | | | | | | | | | | | | | | | Automatically refreshed: apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch generic/backport-5.10/610-v5.13-31-net-ethernet-mtk_eth_soc-fix-parsing-packets-in-GDM.patch generic/backport-5.10/610-v5.13-32-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch generic/backport-5.10/610-v5.13-33-net-ethernet-mtk_eth_soc-add-flow-offloading-support.patch generic/hack-5.10/204-module_strip.patch generic/hack-5.10/911-kobject_add_broadcast_uevent.patch ipq806x/patches-5.10/104-1-drivers-thermal-tsens-Add-VER_0-tsens-version.patch ipq806x/patches-5.10/104-8-drivers-thermal-tsens-Add-support-for-ipq8064-tsens.patch Deleted (reverse-appliable): generic/backport-5.10/610-v5.13-37-net-ethernet-mtk_eth_soc-fix-RX-VLAN-offload.patch ipq806x/patches-5.10/106-5.13-net-stmmac-Set-FIFO-sizes-for-ipq806x.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.36Rui Salvaterra2021-05-141-1/+1
| | | | | | | | | | | | | | | | | | | | | Automatically refreshed: apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch ath79/patches-5.10/410-spi-ath79-Implement-the-spi_mem-interface.patch bcm63xx/patches-5.10/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch generic/pending-5.10/465-m25p80-mx-disable-software-protection.patch ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch ipq806x/patches-5.10/101-dwmac-ipq806x-qsgmii-pcs-all-ch-ctl.patch ipq806x/patches-5.10/106-5.13-net-stmmac-Set-FIFO-sizes-for-ipq806x.patch Deleted (empty or reverse-appliable): ath79/patches-5.10/411-spi-ath79-add-SPI_MASTER_GPIO_SS-flag.patch ath79/patches-5.10/0050-spi-ath79-remove-spi-master-setup-and-cleanup-assign.patch ath79/patches-5.10/0054-spi-sync-up-initial-chipselect-state.patch Manually refreshed: ath79/patches-5.10/0033-spi-ath79-drop-pdata-support.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* apm821xx: MBL: correct phy-mode delay settingsChristian Lamparter2021-05-011-0/+1
| | | | | | | | | | | | | | This came up in an upstream commit: " b1dd9bf688b0 "net: phy: broadcom: Fix RGMII delays for BCM50160 and BCM50610M" The PHY driver entry for BCM50160 and BCM50610M calls bcm54xx_config_init() but does not call bcm54xx_config_clock_delay() in order to configuration appropriate clock delays on the PHY, fix that." So the "rgmii" phy-mode has always been wrong, but went unnoticed since the broadcom phy driver didn't push the delay settings to the chip. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* treewide: remove redundant ubifs kconfig symbolsRui Salvaterra2021-04-211-1/+0
| | | | | | | For the targets which enable ubifs, these symbols are already part of the generic kconfigs. Drop them from the target kconfigs. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.24Kevin Darbyshire-Bryant2021-03-241-2/+2
| | | | | | | | Straightforward refresh of patches using update_kernel. Run tested: x86_64 (apu2) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: bump 5.4 to 5.4.106John Audia2021-03-212-8/+8
| | | | | | | | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. Manually rebased: bcm27xx/950-0993-xhci-quirks-add-link-TRB-quirk-for-VL805.patch layerscape/701-net-0231-enetc-Use-DT-protocol-information-to-set-up-the-port.patch Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [remove accidental whitespace edit] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: remove execute bit and shebang from board.d filesAdrian Schmutzler2021-03-062-2/+0
| | | | | | | | | | | | | | | | So far, board.d files were having execute bit set and contained a shebang. However, they are just sourced in board_detect, with an apparantly unnecessary check for execute permission beforehand. Replace this check by one for existance and make the board.d files "normal" files, as would be expected in /etc anyway. Note: This removes an apparantly unused '#!/bin/sh /etc/rc.common' in target/linux/bcm47xx/base-files/etc/board.d/01_network Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* apm821xx, mt7621, oxnas, rockchip, zynq: remove PLUGIN_HOSTCCIlya Lipnitskiy2021-03-061-1/+0
| | | | | | This config symbol should not be defined in target configs. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* apm821xx: add support for kernel 5.10 for testingChristian Lamparter2021-03-0514-2/+725
| | | | | | | | | | | | This patch copies over refreshed patches from 5.4. - dropped crypto patches (they got upstreamed) - dropped renesas USB 3 firmware loader (they got upstreamed) - NAND now needs extra device-properties for ECC settings. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.4 to 5.4.97John Audia2021-02-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. Manually rebased: bcm27xx 950-0267-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch bcm53xx 180-usb-xhci-add-support-for-performing-fake-doorbell.patch layerscape 302-dts-0008-arm64-dts-ls1046a-accumulated-change-to-ls1046a-boar.patch 820-usb-0016-MLK-16735-usb-host-add-XHCI_CDNS_HOST-flag.patch 820-usb-0018-MLK-18794-1-usb-host-xhci-add-.bus_suspend-override.patch Build system: x86_64 Build-tested: bcm27xx/bcm2711, ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions/everything functional. Signed-off-by: John Audia <graysky@archlinux.us> [remove quilt comment, fix/adjust 820-usb-* layerscape patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* target: use SPDX license identifiers on MakefilesAdrian Schmutzler2021-02-104-16/+6
| | | | | | Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: provide global default for SUPPORTED_DEVICESAdrian Schmutzler2021-01-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The majority of our targets provide a default value for the variable SUPPORTED_DEVICES, which is used in images to check against the compatible on a running device: SUPPORTED_DEVICES := $(subst _,$(comma),$(1)) At the moment, this is implemented in the Device/Default block of the individual targets or even subtargets. However, since we standardized device names and compatible in the recent past, almost all targets are following the same scheme now: device/image name: vendor_model compatible: vendor,model The equal redundant definitions are a symptom of this process. Consequently, this patch moves the definition to image.mk making it a global default. For the few targets not using the scheme above, SUPPORTED_DEVICES will be defined to a different value in Device/Default anyway, overwriting the default. In other words: This change is supposed to be cosmetic. This can be used as a global measure to get the current compatible with: $(firstword $(SUPPORTED_DEVICES)) (Though this is not precisely an achievement of this commit.) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* apm821xx: Netgear WNDR4700 limit kernel lzma dictionaryWiktor Stasiak2020-12-221-2/+1
| | | | | | | | | | | | | | | | | WNDR4700 uboot has an issue with decompressing kernel with default dictionary size (-d23 which is about 8MB). Limiting lzma dictionary lowers memory footprint and allows device to boot the kernel. The highest bootable dictonary size is 18, choosing 16 for an extra safety margin. Kernel size befor and after: -d23: 2663665 Bytes -d16: 2892757 Bytes Kernel size increased by 230kB (9%) Fixes: FS#3258 Signed-off-by: Wiktor Stasiak <wiktor.stasiak@gmail.com>
* kernel: move some disabled symbols to genericAleksander Jan Bajkowski2020-12-221-2/+0
| | | | | | Move some disabled config options found in lantiq target to generic. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* kernel: bump 5.4 to 5.4.85John Audia2020-12-222-6/+6
| | | | | | | | | | | | | All modifications made by update_kernel.sh run in a fresh clone without any existing toolchains. Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* apm821xx: clean up target/subtarget featuresRui Salvaterra2020-11-253-3/+3
| | | | | | | | Move features common to all subtargets to the parent target. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> [split patch to make it target-specific, adjust commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 01:50:08 +0000