aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/apm821xx
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.4 to 5.4.137Hauke Mehrtens2021-07-311-1/+1
| | | | | | | | | | | | Manually rebased generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch All others updated automatically. Compile-tested on: ramips/mt7621, armvirt/32 Runtime-tested on: ramips/mt7621, armvirt/32 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.123Kuan-Yi Li2021-05-302-5/+5
| | | | | | | | | | | | Removed because in upstream generic/pending-5.4/770-02-net-ethernet-mtk_eth_soc-fix-rx-vlan-offload.patch All others updated automatically. Runtime-tested on bcm27xx/bcm2711. Fixes: FS#3085 Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
* kernel: bump 5.4 to 5.4.119Hauke Mehrtens2021-05-151-1/+1
| | | | | | | | | | | | | | | | | Removed because in upstream generic/backport-5.4/050-gro-fix-napi_gro_frags-Fast-GRO-breakage-due-to-IP-a.patch ath79/patches-5.4/0050-spi-ath79-remove-spi-master-setup-and-cleanup-assign.patch ramips/patches-5.4/999-fix-pci-init-mt7620.patch Manually rebased ath79/patches-5.4/0033-spi-ath79-drop-pdata-support.patch All others updated automatically. Compile-tested on: x86/64, ath79/generic Runtime-tested on: x86/64, ath79/generic Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.108Hauke Mehrtens2021-03-272-8/+8
| | | | | | | | | Refreshed all patches. Compile-tested on: x86_64, ath79, lantiq Runtime-tested on: x86_64, ath79 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.97John Audia2021-02-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. Manually rebased: bcm27xx 950-0267-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch bcm53xx 180-usb-xhci-add-support-for-performing-fake-doorbell.patch layerscape 302-dts-0008-arm64-dts-ls1046a-accumulated-change-to-ls1046a-boar.patch 820-usb-0016-MLK-16735-usb-host-add-XHCI_CDNS_HOST-flag.patch 820-usb-0018-MLK-18794-1-usb-host-xhci-add-.bus_suspend-override.patch Build system: x86_64 Build-tested: bcm27xx/bcm2711, ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions/everything functional. Signed-off-by: John Audia <graysky@archlinux.us> [remove quilt comment, fix/adjust 820-usb-* layerscape patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* target: use SPDX license identifiers on MakefilesAdrian Schmutzler2021-02-104-16/+6
| | | | | | Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: provide global default for SUPPORTED_DEVICESAdrian Schmutzler2021-01-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The majority of our targets provide a default value for the variable SUPPORTED_DEVICES, which is used in images to check against the compatible on a running device: SUPPORTED_DEVICES := $(subst _,$(comma),$(1)) At the moment, this is implemented in the Device/Default block of the individual targets or even subtargets. However, since we standardized device names and compatible in the recent past, almost all targets are following the same scheme now: device/image name: vendor_model compatible: vendor,model The equal redundant definitions are a symptom of this process. Consequently, this patch moves the definition to image.mk making it a global default. For the few targets not using the scheme above, SUPPORTED_DEVICES will be defined to a different value in Device/Default anyway, overwriting the default. In other words: This change is supposed to be cosmetic. This can be used as a global measure to get the current compatible with: $(firstword $(SUPPORTED_DEVICES)) (Though this is not precisely an achievement of this commit.) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* apm821xx: Netgear WNDR4700 limit kernel lzma dictionaryWiktor Stasiak2020-12-221-2/+1
| | | | | | | | | | | | | | | | | WNDR4700 uboot has an issue with decompressing kernel with default dictionary size (-d23 which is about 8MB). Limiting lzma dictionary lowers memory footprint and allows device to boot the kernel. The highest bootable dictonary size is 18, choosing 16 for an extra safety margin. Kernel size befor and after: -d23: 2663665 Bytes -d16: 2892757 Bytes Kernel size increased by 230kB (9%) Fixes: FS#3258 Signed-off-by: Wiktor Stasiak <wiktor.stasiak@gmail.com>
* kernel: move some disabled symbols to genericAleksander Jan Bajkowski2020-12-221-2/+0
| | | | | | Move some disabled config options found in lantiq target to generic. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* kernel: bump 5.4 to 5.4.85John Audia2020-12-222-6/+6
| | | | | | | | | | | | | All modifications made by update_kernel.sh run in a fresh clone without any existing toolchains. Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* apm821xx: clean up target/subtarget featuresRui Salvaterra2020-11-253-3/+3
| | | | | | | | Move features common to all subtargets to the parent target. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> [split patch to make it target-specific, adjust commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.75John Audia2020-11-102-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased patches: bcm27xx: patches-5.4/950-0267-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch bcm53xx: patches-5.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch layerscape: patches-5.4/802-can-0025-can-flexcan-add-LPSR-mode-support-for-i.MX7D.patch patches-5.4/808-i2c-0002-MLK-10893-i2c-imx-add-irqf_no_suspend.patch patches-5.4/820-usb-0016-MLK-16735-usb-host-add-XHCI_CDNS_HOST-flag.patch Removed since could be reverse-applied by quilt: mediatek: patches-5.4/0700-arm-dts-mt7623-add-missing-pause-for-switchport.patch All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, x86_64 Run-tested: ipq806x/R7800, x86_64 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [x86_64] Rebase of 802-can-0025-can-flexcan-add-LPSR-mode-support-for-i.MX7D.patch Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* kernel: remove support for kernel 4.19Adrian Schmutzler2020-10-3016-1908/+0
| | | | | | | We use 5.4 on all targets by default, and 4.19 has never been released in a stable version. There is no reason to keep it. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: move CONFIG_F2FS_CHECK_FS to generic kernel configHauke Mehrtens2020-10-111-1/+0
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Move CONFIG_F2FS_FS_SECURITY to generic kernel configHauke Mehrtens2020-10-111-1/+0
| | | | | | | Move the CONFIG_F2FS_FS_SECURITY kernel configuration option to the generic kernel configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Remove 2FS_FS_XATTR and F2FS_STAT_FS symbols from target configsHauke Mehrtens2020-10-111-1/+0
| | | | | | | This config option was moved to the generic kernel configuration. Fixes: ab1bd576562b ("kernel: move F2FS_FS_XATTR and F2FS_STAT_FS symbols to generic") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: clean up XATTR config symbolsPaul Spooren2020-10-091-1/+0
| | | | | | | | | | | | | Extended attributes are required for overlayfs and have hence been long ago enabled for jffs2, but should be enabled unconditionally for all other filesystems which may potentially serve as overlayfs' upper directory. Previously it was inconsistently added in multiple targets. Add symbols to generic kernel config and remove all *_XATTR symbols from target configs. Signed-off-by: Paul Spooren <mail@aparcar.org> [keep things as they are for squashfs, improve commit message] Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* treewide: remove empty default casesAdrian Schmutzler2020-09-174-9/+0
| | | | | | There is no apparent reason to have an empty default case. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* apm821xx: provide legacy interrupts for PCIe in DTChristian Lamparter2020-09-055-0/+9
| | | | | | | | | | | | | | | | | | | | | | Devices with PCIe-Switches like the WNDR4700, MR24 and WNDAP660 need to have the interrupts property specified in the device-tree for the legacy pci interrupt signaling method to work. If the proper interrupt value is not specified, the default INTA IRQ 12 is taken for all devices. This is especially bad, if the device is setup to use INTC, because these interrupts will not be serviced. Russell Senior reported his experience on the MR24: "The symptom is client devices can't see the beacons. Wifi ifaces appear, can scan and hear other networks, but clients can't see the MR24's SSIDs." (The interrupts-property on the WNDAP620 was optional since it uses INTA by default. Likewise the MX60W is in the same category) Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: fix typos in .dts filesChristian Lamparter2020-08-291-2/+2
| | | | | | | This patch fixes various typos or tab-vs-space issues in the APM821XX device targets Device-Tree source files. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: use SPDX-License-identifiersChristian Lamparter2020-08-298-50/+8
| | | | | | | Please note that the DTS are based on really old .DTS from vendors themselves. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: apm821xx.dtsi fix comment stylesChristian Lamparter2020-08-291-2/+4
| | | | Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: MX60W: enumerate PCIe in device-treeChristian Lamparter2020-08-291-0/+19
| | | | | | | This patch adds the pcie-switch and bridge configuration for the Meraki MX60W. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: WNDR4700: delete wndr4700 board fileChristian Lamparter2020-08-295-115/+1
| | | | | | | Thanks to the PCIE OF enumeration patch, this is technically no longer needed. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: MR24: enumerate PCIe in device-treeChristian Lamparter2020-08-291-0/+51
| | | | | | | This patch adds the pcie-switch and bridge configuration for the Meraki MR24. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add missing cells-values for IIC1Christian Lamparter2020-08-291-0/+2
| | | | | | These are copied over from the IIC0. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: DTB: fix warnings related to sata-port warningsChristian Lamparter2020-08-291-0/+4
| | | | | | | | | This patch silences the following warnings: >netgear-wndr4700.dts:168.3-13:Warning (reg_format): /plb/sata@bffd1800/sata-port@0:reg:property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) >netgear-wndr4700.dts:167.26-170.4: Warning (avoid_default_addr_size):/plb/sata@bffd1800/sata-port@0: Relying on default #address-cells value >netgear-wndr4700.dts:167.26-170.4: Warning (avoid_default_addr_size):/plb/sata@bffd1800/sata-port@0: Relying on default #size-cells value Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: WNDAP6x0: enumerate PCIe in device-treeChristian Lamparter2020-08-292-0/+75
| | | | | | | This patch adds the pcie-switch and bridge configuration of the WNDAP620 and WNDAP660. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: WNDR4700: enumerate PCIe in device-treeChristian Lamparter2020-08-294-34/+106
| | | | | | | | | | This patch adds the pcie-switch and bridge configuration of the WNDR4700. This allows to get rid of the legacy firmware monikers and drop the usbport LED declaration. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* treewide: use wpad-basic-wolfssl as defaultPetr Štetiar2020-08-203-3/+3
| | | | | | | | | | | | | | | In order to support SAE/WPA3-Personal in default images. Replace almost all occurencies of wpad-basic and wpad-mini with wpad-basic-wolfssl for consistency. Keep out ar71xx from the list as it won't be in the next release and would only make backports harder. Build-tested (build-bot settings): ath79: generic, ramips: mt7620/mt76x8/rt305x, lantiq: xrx200/xway, sunxi: a53 Signed-off-by: Petr Štetiar <ynezz@true.cz> [rebase, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.58John Audia2020-08-182-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PR is a blend of several kernel bumps authored by ldir taken from his staging tree w/ some further adjustments made by me and update_kernel.sh Summary: Deleted upstreamed patches: generic: 742-v5.5-net-sfp-add-support-for-module-quirks.patch 743-v5.5-net-sfp-add-some-quirks-for-GPON-modules.patch bcm63xx: 022-v5.8-mtd-rawnand-brcmnand-correctly-verify-erased-pages.patch 024-v5.8-mtd-rawnand-brcmnand-fix-CS0-layout.patch mediatek: 0402-net-ethernet-mtk_eth_soc-Always-call-mtk_gmac0_rgmii.patch Deleted patches applied differently upstream: generic: 641-sch_cake-fix-IP-protocol-handling-in-the-presence-of.patch Manually merged patches: generic: 395-v5.8-net-sch_cake-Take-advantage-of-skb-hash-where-appropriate.patch bcm27xx: 950-0132-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch layerscape: 701-net-0231-enetc-Use-DT-protocol-information-to-set-up-the-port.patch Build system: x86_64 Build-tested: ath79/generic, bcm27xx/bcm2708, bcm27xx/bcm2711, imx6, mvebu/cortexa9, sunxi/a53 Run-tested: Netgear R7800 (ipq806x) No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-By: Lucian Cristian <Lucian.cristian@gmail.com> [mvebu] Tested-By: Curtis Deptuck <curtdept@me.com> [x86/64] [do not remove 395-v5.8-net-sch_cake-Take-advantage-... patch, adjust and refresh patches, adjust commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-By: John Audia <graysky@archlinux.us> [ipq806x]
* apm821xx: tidy up 10-fix-wifi-macAdrian Schmutzler2020-08-171-3/+3
| | | | | | | | | This applies some cosmetic style fixes: - remove useless echo - remove double equal sign (specific to bash) - add quotes for -n check Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: Update kernel 4.19 to version 4.19.138Hauke Mehrtens2020-08-101-3/+3
| | | | | | Compile and run tested on lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: unify CONFIG_GPIO_SYSFS in kernel configsFelix Fietkau2020-08-062-2/+0
| | | | | | Enable it for all platforms Signed-off-by: Felix Fietkau <nbd@nbd.name>
* target: replace remaining occurrences of ifconfig with ipAdrian Schmutzler2020-08-031-1/+1
| | | | | | | | | | | ifconfig is effectively deprecated for quite some time now. Let's replace the remaining occurrences for our target setup by the corresponding ip commands now. Note that this does not touch ar71xx, as it will be dropped anyway, and changing it would only make backports harder. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* apm821xx: disable WNDR4700 5.4 imageChristian Lamparter2020-07-311-0/+1
| | | | | | | | | | | | | | | The compressed image that the buildbots are building is too large for the netgear uboot and it crashes and soft-bricks the device. | Uncompressing Kernel Image ... | LZMA: uncompress or overwrite error 1 - must RESET board to recover The whole target likely needs to be switched zImage which is a major hassle due to powerpc's legacy bootwrapper setup as compared to ARM. So for now, disable the device. Reported-by: Wiktor Stasiak (FS#3258) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: derive DEVICE_DTS from device nameAdrian Schmutzler2020-07-213-6/+1
| | | | | | | | | | | The DEVICE_DTS variable always matches the device definition name, just with "_" replaced by "-". Thus, create a DEVICE_DTS definition in Device/Default and drop all the individual statements. If necessary in the future, local DEVICE_DTS will still overwrite that default. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: Update kernel 5.4 to version 5.4.50Hauke Mehrtens2020-07-041-1/+1
| | | | | | | Run tested: ath79, ipq40xx Build tested: ath79, ipq40xx Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Update kernel 4.19 to version 4.19.131Hauke Mehrtens2020-07-041-1/+1
| | | | | | | | | | | | | Fixes: - CVE-2020-10757 The "mtd: rawnand: Pass a nand_chip object to nand_release()" commit was backported which needed some adaptations to other code. Run tested: ath79 Build tested: ath79 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* treewide: drop shebang from non-executable target filesAdrian Schmutzler2020-06-164-8/+0
| | | | | | | | | | | | | | This drops the shebang from all target files for /lib and /etc/uci-defaults folders, as these are sourced and the shebang is useless. While at it, fix the executable flag on a few of these files. This does not touch ar71xx, as this target is just used for backporting now and applying cosmetic changes would just complicate things. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* apm821xx: move device definitions to subfilesAdrian Schmutzler2020-06-113-158/+152
| | | | | | | | | | | | With several subtargets, the image/Makefile becomes crowded after a while. Many targets have moved their device definitions to $subtarget.mk files to have them more organized, let's do this here as well. While at it, also move subtarget-specific build recipes. Cc: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: set DEVICE_TYPE to "nas" for sata subtargetAdrian Schmutzler2020-06-031-0/+1
| | | | | | | | | | | | | | | | Since DEVICE_TYPE cannot be set per device, just set DEVICE_TYPE to "nas" for the entire subtarget, which only contains this single device. Note that while this looks like a cosmetic change in combination with the previous patches, this particular patch actually changes the packages for the device. Suggested-by: Christian Lamparter <chunkeey@gmail.com> Cc: Christian Lamparter <chunkeey@gmail.com> Cc: Sungbo Eo <mans0n@gorani.run> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: drop DEVICE_TYPE when used as device variableAdrian Schmutzler2020-06-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | DEVICE_TYPE is a target/subtarget variable, and it does not have any effect when set in a device definition. It can only be set in a target's or subtarget's Makefile. Consequently, having it set anyway is misleading, so this drops all cases. This effectively reverts the following commits: 7a1497fd601d ("apm821xx: MBL: set DEVICE_TYPE to NAS") 5b4765c93a1b ("gemini: Classify Raidsonic NAS IB-4220-B as a NAS") cdc6de460bb4 ("gemini: D-Link DNS-313 is a NAS") For the following commit, the variable was set when adding device support: 27b2f0fc0fc5 ("kirkwood: add support for Iomega Storcenter ix2-200") Cc: Christian Lamparter <chunkeey@gmail.com> Cc: Sungbo Eo <mans0n@gorani.run> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.36Petr Štetiar2020-04-301-1/+1
| | | | | | | | | | | | | | | Refreshed patches, removed upstreamed patch: generic/hack: 551-loop-Better-discard-support-for-block-devices.patch Added generic config symbol `ARM64_ERRATUM_1542419` due to Fixes: f2791551cedb ("arm64: errata: Hide CTR_EL0.DIC on systems affected by Neoverse-N1 #1542419"). Run tested: qemu-x86-64, apalis, nbg6617 Build tested: x86/64, imx6, ipq40xx, sunxi/a53 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: bump 4.19 to 4.19.115Koen Vandeputte2020-04-162-4/+4
| | | | | | | | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch - 184-USB-serial-option-add-Wistron-Neweb-D19Q1.patch Fixes: - CVE-2020-8647 - CVE-2020-8648 (potentially) - CVE-2020-8649 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* apm821xx: use the real default HZ value from upstreamChristian Lamparter2020-04-101-84/+3
| | | | | | | | | | | | | | | | | | | | With the "real HZ" debate out of the way, let's actually use the apm821xx's default upstream config file at arch/powerpc/configs/44x/bluestone_defconfig. From what I can tell, it sets NO_HZ (well, this platform was for NAS, so this is a bit unexpected) and remove any specific HZ_$VALUE symbol. Sadly, Daniel Engberg didn't run any before/after netperf tests, because it would have been such a slam dunk across the boards. In case of the apm821xx the tcp tx/rx performance improved ~14% (from 600Mbps to 700Mps). This now causes the emac to drop frames too, so let's see if this is causes more problems or not. This patch includes a refresh of the configuration too. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* treewide: Don't diverge from upstream default HZ settings on 4.19Daniel Engberg2020-03-292-2/+0
| | | | | | | | | | | Most targets upstream use 250Hz or even 1000Hz by default while 100Hz is hardcoded in OpenWrt's default config. Use upstream default except for apm821xx which hardsets 1000Hz instead of platform default of 250Hz. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> [Apply same changes to 5.4] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: bump 5.4 to 5.4.28Petr Štetiar2020-03-282-5/+5
| | | | | | | | | | | | | | | | | | | | Changelog since 5.4.24 mentions CVE-2019-19769, CVE-2020-8648, CVE-2020-8649 and CVE-2020-8647. Removed upstreamed: generic: 507-v5.6-iio-chemical-sps30-fix-missing-triggered-buffer-depe.patch generic: 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch bcm27xx: 950-0435-ASoC-pcm512x-Fix-unbalanced-regulator-enable-call-in.patch ipq806x: 701-stmmac-fix-notifier-registration.patch lantiq: 002-pinctrl-falcon-fix-syntax-error.patch octeontx: 0002-net-thunderx-workaround-BGX-TX-Underflow-issue.patch Run tested: apu2, qemu-x86-64, apalis, a64-olinuxino, nbg6617 Build tested: sunxi/a53, imx6, x86/64, ipq40xx Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> [apu2] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* apm821xx: switch to 5.4 kernelChristian Lamparter2020-03-221-2/+1
| | | | | | This patch switches the APM821XX target to the linux kernel 5.4 variant. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: wndr4700: add preliminary drivetemp sensorChristian Lamparter2020-03-222-2/+25
| | | | | | | | | | | | | | | | | | This patch prepares the WNDR4700 to use the HDD sensor for the thermal zone. While the kernel's thermal.txt device-tree binding documentation files talks about supporting multiple sensors for a zone. This sadly is NOT the case. Even the most current upstream kernels (5.6-rc) supports just >one< sensor per zone: (driver/base/of-thermal.c:886) | * REVIST: for now, the thermal framework supports only | * one sensor per thermal zone. Thus, we are considering | * only the first two values as slope and offset. I do hope that this warning will prevent others wasteing time on trying to figure out why their multi-sensor thermal-zones definitions are not working as specified. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>