aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/apm821xx
Commit message (Collapse)AuthorAgeFilesLines
* build: centralize fakeroot codeJoseph C. Lehner2017-02-041-18/+2
| | | | | | | | | | | | | This patch moves the fakeroot code required by some devices to `image-commands.mk`. Create the fakeroot on the fly by using the undocumented -s (skip copy) parameter of mkimage. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> [remove unused NETGEAR_KERNEL_MAGIC, remove workarounds to have a dummy rootfs for mkimage] Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: update 4.4 kernel to 4.4.42Hauke Mehrtens2017-01-133-6/+6
| | | | | | | Refresh patches on all 4.4 supported platforms. Compile & run tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* image: when using the new image build code, gzip ext4 images by defaultFelix Fietkau2017-01-131-1/+0
| | | | | | | | | This reduces the amount of hacks in the makefile code. Remove the apm821xx code to do the same - it was broken and left both compressed and uncompressed images in $(BIN_DIR) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove ubifs xz decompression supportFelix Fietkau2017-01-091-2/+0
| | | | | | | It has been unused, and less useful than squashfs for cases where flash space usage matters. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump to 4.4.35Kevin Darbyshire-Bryant2016-11-291-3/+3
| | | | | | | | | | | Refresh patches on all 4.4 supported platforms. 077-0005-bgmac-stop-clearing-DMA-receive-control-register-rig.patch removed as now upstream. Compile & run tested: ar71xx - Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* apm821xx: make it possible to update the dtb partition on the WNDR4700Christian Lamparter2016-11-242-6/+6
| | | | | | | | | | | | | | | | | | | | Currently, the device-tree partition is marked as read-only. Hence, userspace tools like mtd can't write into the partition. This however will be necessary in case the DTB needs to be updated. This patch also adds the kernel.dtb image, so the compiled DTB is exported as a file and available in the binary directory along the firmware images. Note: the u-boot does expects the dtb to be a uimage. To update the dtb manually: 1. copy the generated dtb to the router. 2. mtd erase /dev/mtd2 3. mtd write wndr4700.dtb /dev/mtd2 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: Add support for the Cisco Meraki MX60/MX60WChris Blake2016-11-2111-16/+283
| | | | | | | | | | | | | | | | | | | This patch adds support for the Cisco Meraki MX60/MX60W Security Appliance. Flashing information can be found at https://github.com/riptidewave93/LEDE-MX60 Specs are as follows: AppliedMicro APM82181 SoC at 800MHz 1GiB NAND - Samsung K9K8G08U0D 512MB DDR RAM - 4x Nanya NT5TU128M8GE-AC Atheros AR8327-BL1A Gigabit Ethernet Switch 1x USB 2.0 Port More info can be found at https://wiki.openwrt.org/toh/meraki/mx60 Cc: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* kernel: update kernel 4.4 to version 4.4.32Stijn Tintel2016-11-163-5/+9
| | | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on all targets that use kernel 4.4 and aren't marked broken. Runtime-tested on ar71xx, octeon. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* apm821xx: remove replaced netgear, wndr4700-usb dwc2 definitonChristian Lamparter2016-11-121-48/+0
| | | | | | | This special dwc2 device definition for the Netgear WNDR4700 has been replaced by amcc,usb-otg-405ex. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: consolidate apm821xx device trees filesChristian Lamparter2016-11-126-1472/+990
| | | | | | | | | | | | | This patch moves the common SoC device tree entries from the currently four supported platforms into a common apm82181.dtsi. Furthermore, this patch also changes the GPIO, IRQ and input definitions of the supported platforms to use the defined dt-bindings macros for GPIO_ACTIVE_LOW|HIGH, KEY_WPS|RESTART|*, IRQ_TYPE_* when it's appropriate. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add amcc, usb-otg-405ex devicetree definitionChristian Lamparter2016-11-121-0/+44
| | | | | | | | | | | This patch adds support for the amcc,usb-otg-405ex device which is found in all APM82181 SoCs. Note: The system can't use the generic "snps,dwc2" compatible because of the special ahbcfg configuration. The default GAHBCFG_HBSTLEN_INCR4 of snps,dwc2 can cause a system hang when the USB and SATA is used concurrently. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: redo WAN green and yellow LEDsChristian Lamparter2016-11-082-1/+4
| | | | | | | | | Because the WAN port is handled by the internal AR8327N switch, the device should use swconfig_leds trigger to handle the link activity of the WAN LED. This has the added bonus that the WAN LED will now go dark if there's no ethernet cable connected to the WAN port. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add back end-of-UBI marker for the WNDR4700 and MR24Christian Lamparter2016-11-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch "build: drop UBI EOF marker from images by default" (commit d27bce8d28eb129af0abd9c80a7756301b7d588a) removed the end-of-UBI marker. Without this marker, the boards will panic during boot: [ 1.683458] ubi0: attaching mtd4 [ 1.696181] ubi0 warning: scan_peb: valid VID header but corrupted EC header at PEB 31 [ 1.704367] ubi0 error: scan_peb: bad image sequence number 549886691 in PEB 32, expected 184585623 [ 1.713377] Erase counter header dump: [ 1.717110] magic 0x55424923 [ 1.720843] version 1 [ 1.723797] ec 0 [ 1.726752] vid_hdr_offset 512 [ 1.729880] data_offset 2048 [ 1.733094] image_seq 549886691 [ 1.736740] hdr_crc 0x92ba8130 [ 1.740472] erase counter header hexdump: [ 1.744493] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd4, error -22 [ 1.751528] UBI error: cannot attach mtd4 [ 1.755373] hctosys: unable to open rtc device (rtc0) [ 1.761130] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 1.768604] Please append a correct "root=" boot option; here are the available partitions: [...] [ 1.856992] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.866519] Rebooting in 1 seconds..Auto calibration --- Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: fix USB LED trigger for WNDR4700Rafał Miłecki2016-10-281-2/+1
| | | | | | | | | The old usbdev trigger never supported assigning more than 1 USB port. This code we got was never working as expected and it was missing 2 more ports. Switch to usbport to have LED working with all ports. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Christian Lamparter <chunkeey@gmail.com>
* switch to the new usbport LED triggerRafał Miłecki2016-10-193-4/+4
| | | | | | | This makes init.d script handle existing UCI entries using the new trigger. It also switches all targets to use its package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* apm821xx: replace recovery image for the MBL with initramfsChristian Lamparter2016-10-134-118/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch "images: bump default rootfs size to 256 MB" a1f83bad606411a561e8e60110c71232b1a28aa2 caused a crash during boot for the recovery images. This is because both variants of the MyBook Live only have 256MB of RAM and for the recovery option, the ext4 rootfs was simply stored in the RAMDISK. This patch replaces recovery image for the MBL with an initramfs kernel. In order to boot the initramfs (for recovery or development): 0. copy the initramfs and device tree into tftp's server directory # cp *-initramfs-kernel.bin to /tftp-server/mbl.bin # cp *-ext4-kernel.dtb to /tftp-server/fdt.bin 1. Connect the MyBook Live (Duo) serial port. (Warning! Use a 3.3v level shifter). 2. Hit Enter during u-boot and insert these three lines: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; # tftp ${kernel_addr_r} mbl.bin; tftp ${fdt_addr_r} fdt.bin # run addtty addmisc; bootm ${kernel_addr_r} - ${fdt_addr_r} Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: update kernel 4.4 to version 4.4.20Álvaro Fernández Rojas2016-09-151-29/+10
| | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on brcm2708 only. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* image: specify max image size in Kilobyte/MegabyteMathias Kresin2016-09-041-2/+2
| | | | | | Use the k and m unit suffix to be consistent with the blocksize. Signed-off-by: Mathias Kresin <dev@kresin.me>
* image: use k as unit suffix for blocksizeMathias Kresin2016-09-041-2/+2
| | | | | | | Use k as unit suffix for kilobyte to have a the same unit regardless of the used filesystem. Signed-off-by: Mathias Kresin <dev@kresin.me>
* apm821xx: image: add support for k unit suffix to boot-imgMathias Kresin2016-09-081-1/+1
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* apm821xx: backport generic HDD led-triggers for WNDR4700 and MBLChristian Lamparter2016-09-084-0/+232
| | | | | | | This patch backports the new generic HDD/SDD led-trigger from 4.8-rc1. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: detect sd-card media changes for the WNDR4700Christian Lamparter2016-09-082-1/+20
| | | | | | | | | The insertion or removal of the sd-card cannot be detected by the hardware itself. This is by design. To workaround this, for the WNDR4700 unload/load the dwc2 module in case the the special SD CARD GPIO line is low/high. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add size check for initramfs kernel for the Meraki MR24Christian Lamparter2016-09-051-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | Russell Senior reported an issue with the MR24 initramfs kernels: > ## Booting kernel from Legacy Image at 00c10000 ... > Image Name: POWERPC LEDE Linux-4.4.19 > Created: 2016-08-31 11:57:05 UTC > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 2155723 Bytes = 2.1 MiB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK >Wrong Ramdisk Image Format >Ramdisk image is corrupt or invalid For the MR24, the kernel is uploaded to 0x10000. The ramdisk starts at 0x200000. This leaves the kernel with just 0x1f0000 bytes = 1984kb. This patch adds a size check so the image creation script will abort instead of producing a unbootable initramfs image. A separate patch "apm821xx: Fix initramfs image for the Meraki MR24" which fixed the reported issue was submitted earlier. Cc: Russell Senior <russell@personaltelco.net> Cc: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: Fix initramfs image for the Meraki MR24riptidewave932016-09-051-1/+1
| | | | | | | When gzip is used, our kernel is too large and this causes the ramdisk to be at the wrong offset. Fix by moving to lzma. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* build: fix subtarget descriptionsFelix Fietkau2016-09-041-4/+4
| | | | | | Move Target/Description above the target.mk include Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update kernel 4.4 to version 4.4.19Stijn Tintel2016-08-2321-393/+191
| | | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on all targets that use kernel 4.4 and aren't marked broken. Runtime-tested on ar71xx, octeon and x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* apm821xx: fix IB image buildingJo-Philipp Wich2016-08-011-6/+10
| | | | | | | Change the image build code to generate the DTB files as part of the kernel build phase in order to fix the image build in the ImageBuilder environment. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* image: add a helper variable for getting kernel/rootfs from within image ↵Felix Fietkau2016-07-311-4/+4
| | | | | | Build/* templates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: rename sysupgrade-nand to sysupgrade-tarJo-Philipp Wich2016-07-291-2/+2
| | | | | | | Now that the "sysupgrade-nand" step is used by non-NAND targets as well, rename it to "sysupgrade-tar" to make it more generic. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* apm821xx: only attempt to mount /boot on MyBook LiveFelix Fietkau2016-07-291-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: fix atheros PCIe cards on the MR24Christian Lamparter2016-07-251-9/+12
| | | | | | | | | | | | | | | The consolidation of the MR24 and WNDR4700 subtargets into the nand subtarget broke MR24's atheros wlan. This was because the wndr4700's board code used a pci_fixup routines to supply the ath9k module with the calibration data. This is not necessary on the MR24 as it has standard mini-pcie ports. Hence the two AR9380 mini-pcie cards do not need any calibration data overrides. Cc: chrisrblake93@gmail.com Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: use lzma compression for the initramfs imagesChristian Lamparter2016-07-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | The MR24's u-boot takes it sweet time decompressing the LZMA-packed initramfs image. A user reported that compared to the old gzip method in v2: it "takes a ton longer to decompress like 4\x the old boot time for decompression". This patch also fixes a issue with the WNDR4700's initramfs image getting to big and causing the following u-boot crash during the decompression: "Uncompressing Multi-File Image ... Error: inflate() returned -5 out-of-mem or overwrite error - must RESET board to recover" This patch fixes both issues by reverting the MR24's initramfs compression method back to gzip. And choosing to compress the initramfs within the initramfs image as LZMA by default. Cc: chrisrblake93@gmail.com Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* tools: bring back genext2fs for apm821xxFelix Fietkau2016-07-231-4/+0
| | | | | | | | This reverts commit 8c68c104eaba65273280c7a4727fbb10ab10f5af. It is used for apm821xx, which needs ext2 (not ext4) images for some devices. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: rework image build code for MyBook LiveFelix Fietkau2016-07-221-11/+13
| | | | | | | Eliminate redundant mkfs calls, preparation for upcoming image build core rework Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: add DEVICE_DTS_DIR variable, remove redundant DEVICE_VARS entryFelix Fietkau2016-07-221-1/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: add missing default profiles for subtargetsFelix Fietkau2016-07-223-0/+41
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* apm821xx: add support for the Netgear Centria N900 WNDR4700/WNDR4720Christian Lamparter2016-07-2217-1/+2129
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Netgear Centria N900 WNDR4700/WNDR4720 hardware highlights: CPU: AMCC PowerPC APM82181 Rev. E at 1000 MHz (PLB=166, OPB=83, EBC=83 MHz) Security support, Boot ROM Location NAND wo/ECC 2k page (8 bits) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: AMCC APM82181 Evaluation Board, PCIE0/SATA1, 1*USB OTG DRAM: 256 MB (ECC not enabled, 500 Mb/s, 32-bit, CL3) NAND: 128 MiB (SLC, erase size: 128 KiB, page size: 2048, OOB size: 64) ETH: Atheros AR8327N Gigabit Switch (4 x LAN, 1 x WAN) USB: 2 x 3.0 (Renesas uPD720202K8-711-BAA-A, firmware not included) SATA: 1 x SATA-II 3.5" Hard Drive Bay for HDDs (DesignWare SATA). WLAN1: Atheros AR9380 5GHz 802.11an 3:3x3 WLAN2: Atheros AR9581 2.4GHz 802.11bgn 3:3x3 SDCARD: GL827L SD/MMC/MS Flash Card Reader (on internal dwc2 USB 2.0 host) I2C: GMT G781 (i2c-0 @ 0x4d - lm90 compatible temperature sensor) TC654 (i2c-0 @ 0x1b - Dual PWM fan Speed controller) WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! INFO: Since this device only has a NAND chip. I opted for going with root.squashfs in a UBI volume. There's no squashfs/jffs2 image. This target produces three images. a. netgear factory image This image can be used to flash the Netgear WNDR4700 via the firmware recovery mechanism and the web admin site. The bootloader can be instructed to do a firmware recovery via the # fw_recovery command. It will start a tftp server and listen on 192.168.1.1 (the ipaddr variable in u-boot) for incoming, binary tftp clients. The firmware recovery mechanism is also started if any of the flash content which contains the kernel, device-tree definitions or the (fake)rootfs fails to verify or load. b. sysupgrade.tar image for sysupgrade An sysupgrade will replace the entire current LEDE installation with a newer version. This does include the kernel and the ubi rootfs partition. The configuration can be carried over automatically as well if desired. simply copy the sysupgrade.tar to a the WNDR4700 running LEDE and run: root@lede:~# sysupgrade sysupgrade.tar and let it reboot. Note: The devicetree flash area is NOT updated. Until the devicetree definition is stable, this can lead to all sorts of hardware detection problems! So make sure, if you experience issues: try the fw_recovery. If you are unsure whenever this affects you: test if you can reproduce your issue with the initramfs method. As it will always have up-to-date device-tree definitions. c. initramfs image for TFTP (for development and testing) To use the initramfs method, follow the following steps: 1) Move the "lede-apm821xx-netgear-WNDR4700-initramfs-kernel.bin" file to to the root directory of your TFTP server. 2) rename it to wndr4700.bin 3) On the WNDR4700 - Hit Enter during u-boot and insert: # tftp 400000 wndr4700.bin; run addtty; bootm 400000 - This will boot the LEDE image. Note: The default tftp server is 192.168.1.7, if you want to change it: # setenv serverip 192.168.8.7; Note2: The default address for the WNDR4700 is 192.168.1.1: # setenv ipaddr 192.168.8.8; Note: Connect you tftp server on the last LAN port (not the WAN) Note: The firmware for the USB 3.0 Host chip is not included anymore. Therefore the two USB 3.0 ports will not work without the uPD7070x-firmware package installed. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: lm90 add thermal sensor interface support for device treeChristian Lamparter2016-07-222-0/+453
| | | | | | | | | | | | | | From 912-hwmon-lm90-expose-to-thermal-fw-via-DT.patch: "This patch adds to lm90 temperature sensor the possibility to expose itself as thermal zone device, registered on the thermal framework. The thermal zone is built only if a device tree node describing a thermal zone for this sensor is present inside the lm90 DT node. Otherwise, the driver behavior will be the same." Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: tc654: add driver for Microchip TC654/TC655 PWM fan controllersChristian Lamparter2016-07-221-0/+1037
| | | | | | | | | | | | | | | | | | | This patch adds a hwmon driver for the Microchip TC654 and TC655 Dual SMBus PWM Fan Speed Controllers with Fan Fault detection. The chip is described in the DS2001734C Spec Document from Microchip. It supports: - Shared PWM Fan Drive for two fans - Provides RPM - automatic PWM controller (needs additional NTC/PTC Thermistors.) - Overtemperature alarm (when using NTC/PTC Thermistors) The TC654 is used by the Netgear WNDR47X0 to control its system fan. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add support for the Western Digital MyBook Live SeriesChristian Lamparter2016-07-2220-2/+1006
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: sata_dwc_460ex: backport fixes and cleanups from 4.7Christian Lamparter2016-07-221-0/+1088
| | | | | | | | | | This patch fixes the sata_dwc_460ex SATA driver which is used by the SATA controllers in the MyBook Live Series and WNDR4700. The code was backported from the upstream kernel. It can be dropped completely on 4.7+. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: dw_dmac: backport fixes and cleanups from 4.7Christian Lamparter2016-07-224-0/+2303
| | | | | | | | | | This patch fixes the dw_dmac dma engine which is used by the SATA controllers in the MyBook Live Series and WNDR4700. The code was backported from the upstream kernel. It can be dropped completely on 4.7+. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add support for the Cisco Meraki MR24Chris Blake2016-07-2215-10/+722
| | | | | | | | | | | | | | | | | | | This patch adds support for the Cisco Meraki MR24 Access point to the apm821xx target. Board: MR24 - Meraki MR24 Cloud Managed Access Point CPU: APM82181 SoC 800 MHz (PLB=200 OPB=100 EBC=100) Flash size: 32MiB RAM Size: 128MiB Wireless: Atheros AR9380 5.0GHz + Atheros AR9380 2.4GHz Ethernet ports: 1x Gigabit Atheros AR8035 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! For flashing instructions, visit: <https://github.com/riptidewave93/Openwrt-MR24/blob/master/README.md#flashing> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* apm821xx: add support for the apm821xx device targetChris Blake2016-07-2214-0/+1177
This adds a new target for PowerPC APM82181 and APM82161 (464-based) boards, as well as adds support for the booke-wdt watchdog package. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>