aboutsummaryrefslogtreecommitdiffstats
path: root/scripts
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: Skip more hashed blocks for OM2P(-HS) 64k variantSven Eckelmann2018-09-101-1/+1
| | | | | | | | | | | | | | | | | | The OM2P(-HS)v4 got a variant which uses a slightly different flash. The standard versions used a flash with 256KB blocks which is no longer available. The replacement flash uses a flash with 64K blocks. The padding for the image rootfs is already for 64K and 256K and thus can be flashed on the device without any problems. Unfortunately, the bootloader will check $rootfs_size (rounded down to the nearest 64k block) minus 1x 64k. But it is now possible that the new JFFS2 rootfs_data starts even earlier and modifies the checked region. The check will then fail and the backup image (when available) will be booted. Just setting it to the same number of skipped blocks as other 64K models avoids this problem. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* scripts/ipkg-build: quash error messages when conffiles.resolved is emptyYousong Zhou2018-09-091-2/+4
| | | | | | | | | | | | | | | When Package/xx/conffiles only contains directories that are empty at package time, conffiles.resolved will be missing and the following error messages will appear in the build log. /home/yousong/git-repo/openwrt/openwrt/scripts/ipkg-build -c -o 0 -g 0 /home/yousong/git-repo/openwrt/openwrt/build_dir/target-mips_24kc_musl/linux-malta_be/openvswitch-2.10.0/ipkg-mips_24kc/openvswitch-common /home/yousong/git-repo/openwrt/openwrt/bin/packages/mips_24kc/packages mv: cannot stat 'CONTROL/conffiles.resolved': No such file or directory chmod: cannot access 'CONTROL/conffiles': No such file or directory It will not break the ipkg-build process. The change is merely cosmetic to not cause confusion when reading logs Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* scripts/metadata.pm: avoid adding dup names in provides listYousong Zhou2018-09-091-0/+1
| | | | | | | | | | | | The need arises from building Open vSwitch kernel datapath modules, e.g. - kmod-openvswitch from Linux upstream - kmod-openvswitch-intree from openvswitch source code where both provides virtual package "kmod-openvswitch" for userspace packages to select and depend on Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* build: add support for enabling the rootfs/boot partition size option via ↵Felix Fietkau2018-09-031-0/+2
| | | | | | target feature Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts: bundle-libraries: fix logic flawJo-Philipp Wich2018-08-291-7/+6
| | | | | | | | | | | Previous refactoring of the script moved the LDSO detection into a file-not-exists condition, causing onyl the very first executable to get bundled. Solve the problem by unconditionally checking for LDSO again. Fixes: 9030a78a71 ("scripts: bundle-libraries: prevent loading host locales") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: add mkrasimageDavid Bauer2018-08-281-196/+0
| | | | | | | | | | | | | | | The current make-ras.sh image generation script for the ZyXEL NBG6617 has portability issues with bash. Because of this, factory images are currently not built correctly by the OpenWRT buildbots. This commit replaces the make-ras.sh by C-written mkrasimage. The new mkrasimage is also compatible with other ZyXEL devices using the ras image-format. This is not tested with the NBG6616 but it correctly builds the header for ZyXEL factory image. Signed-off-by: David Bauer <mail@david-bauer.net>
* scripts: bundle-libraries: prevent loading host locales (FS#1803)Jo-Philipp Wich2018-08-271-5/+21
| | | | | | | | | | | | | Binary patch the bundled glibc library to inhibit loading of host locale archives in order to avoid triggering internal libc assertions when invoking shipped, bundled executables. The problem has been solved with upstream Glibc commit 0062ace229 ("Gracefully handle incompatible locale data") but we still need to deal with older Glibc binaries for some time to come. Fixes FS#1803 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* scripts: time.pl: avoid hard Time::HiRes dependencyJo-Philipp Wich2018-08-051-4/+27
| | | | | | | Use Time::HiRes when available and fallback to raw syscall interface when not. If that fails too, simply report 0, 0 as real time. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: remove GNU time dependencyJo-Philipp Wich2018-08-051-0/+42
| | | | | | | | | | Replace the GNU time program invocation with a simple Perl script reporting the timing values. Since we require Perl anyway for the build system, we can as well use that instead of requiring a random GNU utility rarely installed by default. Fixes: ff6e62b288 ("build: log time taken by each packages/steps") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* config: Change conf.c remove compiler warningsPaul Schulz2018-07-301-6/+6
| | | | | | | | | | | | Compiler is producing the warning: warning: format not a string literal and no format arguments [-Wformat-security] This patch makes the format a literal string in printf statements. This with: gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3) in Ubuntu 18.04 Signed-off-by: Paul Schulz <paul@mawsonlakes.org>
* scripts/dl_github_archive.py: stringify exceptionYousong Zhou2018-07-171-4/+5
| | | | | | Closes openwrt/openwrt#1163 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* include/feeds.mk: rework generation of opkg distfeeds.confMatthias Schiffer2018-07-121-2/+3
| | | | | | | Allow enabling/commenting/disabling each feed individually by using a tristate config symbol. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* scripts/feeds: add src-dummy methodMatthias Schiffer2018-07-121-1/+6
| | | | | | | | | The src-dummy method does not actually obtain any feed, but it can be used to insert addtional entries into the opkg distfeeds.conf. This is useful to make package feeds available to users without requiring the corresponding source feeds to be available during build. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* scripts/dl_github_archive.py: rename from download.pyYousong Zhou2018-07-051-118/+123
| | | | | | | | | | | - Make the code more GitHub-specific - Requires mirror hash to work with .gitattributes - Use different API depending on whether PKG_SOURCE_VERSION is a complete commit id or other ref types like tags - Fix removing symbolic link - pre-clean dir_untar for possible leftovers from previous run Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* fixup-makefile.pl: fixup when PKG_SOURCE is defined elsewhereYousong Zhou2018-07-051-1/+1
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* build: fix target metadata scan dependenciesFelix Fietkau2018-07-021-2/+2
| | | | | | | Move SCAN_DEPS to scan.mk to eliminate redundancy with scripts/feeds Add image/*.mk to SCAN_DEPS for targets to pick up newly added devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/download.py: use a more terse api for fetching git commit dateYousong Zhou2018-06-271-2/+2
| | | | | | | | | | | The previous api [1] includes in its response patch data among other things, as such the response size can vary and be big. Use another api[2] to improve it a bit [1] Get a single commit, Repositories, https://developer.github.com/v3/repos/commits/#get-a-single-commit [2] Git Commits, Git Data, https://developer.github.com/v3/git/commits/#get-a-commit Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* build: download code from github using archive APIYousong Zhou2018-06-271-0/+421
| | | | | | | | | | | | | | | | | | | | | | | | | | A new python script scripts/download.py is added to fetch tarballs using GitHub archive API [1], then repack in a reproducible way same as the current DownloadMethod/git GitHub imposes a 60 reqs/hour rate limit on unauthenticated API access[2]. This affects fetching commit date for feeding tar --mtime= argument. However, observation indicates that archive download is NOT subject to this limit at the moment. In the rare cases where download fails because of this, we will falback to using DownloadMethod/git The missing piece in the GitHub API is that it cannot provide in the tarball dependent submodules's source code. In that case, the implementation will also fallback to using DownloadMethod/git [1] Get archive link, https://developer.github.com/v3/repos/contents/#get-archive-link [2] Rate limiting, https://developer.github.com/v3/#rate-limiting v2 <- v1: - allow passing multiple urls with --urls argument - add commit ts cache. can be helpful on retry Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ipq40xx: add support for the ZyXEL NBG6617Christian Lamparter2018-06-261-0/+196
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for ZyXEL NBG6617 Hardware highlights: SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB DDR3L-1600/1866 Nanya NT5CC128M16IP-DI @ 537 MHz NOR: 32 MiB Macronix MX25L25635F ETH: Qualcomm Atheros QCA8075 Gigabit Switch (4 x LAN, 1 x WAN) USB: 1 x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET Button, WIFI/Rfkill Togglebutton, WPS Button LEDS: Power, WAN, LAN 1-4, WLAN 2.4GHz, WLAN 5GHz, USB, WPS Serial: WARNING: The serial port needs a TTL/RS-232 3.3v level converter! The Serial setting is 115200-8-N-1. The 1x4 .1" header comes pre-soldered. Pinout: 1. 3v3 (Label printed on the PCB), 2. RX, 3. GND, 4. TX first install / debricking / restore stock: 0. Have a PC running a tftp-server @ 192.168.1.99/24 1. connect the PC to any LAN-Ports 2. put the openwrt...-factory.bin (or V1.00(ABCT.X).bin for stock) file into the tftp-server root directory and rename it to just "ras.bin". 3. power-cycle the router and hold down the the WPS button (for 30sek) 4. Wait (for a long time - the serial console provides some progress reports. The u-boot says it best: "Please be patient". 5. Once the power LED starts to flashes slowly and the USB + WPS LEDs flashes fast at the same time. You have to reboot the device and it should then come right up. Installation via Web-UI: 0. Connect a PC to the powered-on router. It will assign your PC a IP-address via DHCP 1. Access the Web-UI at 192.168.1.1 (Default Passwort: 1234) 2. Go to the "Expert Mode" 3. Under "Maintenance", select "Firmware-Upgrade" 4. Upload the OpenWRT factory image 5. Wait for the Device to finish. It will reboot into OpenWRT without any additional actions needed. To open the ZyXEL NBG6617: 0. remove the four rubber feet glued on the backside 1. remove the four philips screws and pry open the top cover (by applying force between the plastic top housing from the backside/lan-port side) Access the real u-boot shell: ZyXEL uses a proprietary loader/shell on top of u-boot: "ZyXEL zloader v2.02" When the device is starting up, the user can enter the the loader shell by simply pressing a key within the 3 seconds once the following string appears on the serial console: | Hit any key to stop autoboot: 3 The user is then dropped to a locked shell. |NBG6617> HELP |ATEN x[,y] set BootExtension Debug Flag (y=password) |ATSE x show the seed of password generator |ATSH dump manufacturer related data in ROM |ATRT [x,y,z,u] RAM read/write test (x=level, y=start addr, z=end addr, u=iterations) |ATGO boot up whole system |ATUR x upgrade RAS image (filename) |NBG6617> In order to escape/unlock a password challenge has to be passed. Note: the value is dynamic! you have to calculate your own! First use ATSE $MODELNAME (MODELNAME is the hostname in u-boot env) to get the challange value/seed. |NBG6617> ATSE NBG6617 |012345678901 This seed/value can be converted to the password with the help of this bash script (Thanks to http://www.adslayuda.com/Zyxel650-9.html authors): - tool.sh - ror32() { echo $(( ($1 >> $2) | (($1 << (32 - $2) & (2**32-1)) ) )) } v="0x$1" a="0x${v:2:6}" b=$(( $a + 0x10F0A563)) c=$(( 0x${v:12:14} & 7 )) p=$(( $(ror32 $b $c) ^ $a )) printf "ATEN 1,%X\n" $p - end of tool.sh - |# bash ./tool.sh 012345678901 | |ATEN 1,879C711 copy and paste the result into the shell to unlock zloader. |NBG6617> ATEN 1,0046B0017430 If the entered code was correct the shell will change to use the ATGU command to enter the real u-boot shell. |NBG6617> ATGU |NBG6617# Co-authored-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: David Bauer <mail@david-bauer.net>
* scripts: Replace obsolete POSIX tmpnam in slugimage.pl with File::Temp functionTed Hess2018-06-051-4/+4
| | | | Signed-off-by: Ted Hess <thess@kitschensync.net>
* env: only use color diffs on terminalsPhilip Prindeville2018-05-051-1/+1
| | | | | | | | When sending script/env diff's output to a file or pipeline, you don't want escape characters for ANSI color sequences fouling the byte stream. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* download.pl: Change OpenWrt mirrors to HTTPS.Rosen Penev2018-05-011-4/+4
| | | | | | These have supported HTTPS for quite a while. I have not seen any obvious breakage. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* download.pl: Change SourceForge address to HTTPS.Rosen Penev2018-05-011-1/+1
| | | | | | | | SourceForge has supported HTTPS for its downloads for a long time now. I have not been able to see any failures resulting from this change. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/feeds: add support for git feeds with submodulesFelix Fietkau2018-04-271-0/+6
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts: bundle-libraries: fix build on OS X (FS#1493)Jo-Philipp Wich2018-04-261-0/+4
| | | | | | | | This allegedly fixes compilation of the library bundler preload library on Apple OS X. The resulting executables have not been runtime tested due to a lack of suitable test hardware. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ipq40xx: add support for OpenMesh A62Sven Eckelmann2018-04-231-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * QCA IPQ4019 * 256 MB of RAM * 32 MB of SPI NOR flash (s25fl256s1) - 2x 15 MB available; but one of the 15 MB regions is the recovery image * 2T2R 2.4 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62 * 2T2R 5 GHz (channel 36-64) - QCA9888 hw2.0 (PCI) - requires special BDF in QCA9888/hw2.0/board-2.bin bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 * 2T2R 5 GHz (channel 100-165) - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62 * multi-color LED (controlled via red/green/blue GPIOs) * 1x button (reset; kmod-input-gpio-keys compatible) * external watchdog - triggered GPIO * 1x USB (xHCI) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x gigabit ethernet - phy@mdio3: + Label: Ethernet 1 + gmac0 (ethaddr) in original firmware + 802.3at POE+ - phy@mdio4: + Label: Ethernet 2 + gmac1 (eth1addr) in original firmware + 18-24V passive POE (mode B) * powered only via POE The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. The initramfs image can be started using setenv bootargs 'loglevel=8 earlycon=msm_serial_dm,0x78af000 console=ttyMSM0,115200 mtdparts=spi0.0:256k(0:SBL1),128k(0:MIBIB),384k(0:QSEE),64k(0:CDT),64k(0:DDRPARAMS),64k(0:APPSBLENV),512k(0:APPSBL),64k(0:ART),64k(0:custom),64k(0:KEYS),15552k(inactive),15552k(inactive2)' tftpboot 0x84000000 openwrt-ipq40xx-openmesh_a62-initramfs-fit-uImage.itb set fdt_high 0x85000000 bootm 0x84000000 Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* scripts: add EVA ramboot scriptValentin Spreckels2018-03-181-0/+37
| | | | | | | | | | | | Use the EVA bootloader to load a small linux system into the ram and boot it from there: ./scripts/flashing/eva_ramboot.py 192.168.178.1 path/to/initramfs-kernel.bin Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE> Acked-by: John Crispin <john@phrozen.org> [reworded commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
* build: Allow to change the FIT config section nameSven Eckelmann2018-03-171-4/+6
| | | | | | | | Some devices only boot when a special config is found in the image and completely ignore the default entry during the selection. These devices can now use the variable DEVICE_DTS_CONFIG in their device image definition. Signed-off-by: Sven Eckelmann <sven@narfation.org>
* scripts/metadata.pm: allow group-only Require-User specsMatthias Schiffer2018-02-261-2/+4
| | | | | | | | /lib/functions.sh can deal with Require-User specifications that only contain a group, but no user. Adjust metadata.pm to allow such specifications as well. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* build: cleanup leftover qconf filesAlif M. Ahmad2018-02-131-1/+1
| | | | | | | | | | ``make xconfig`` toplevel target will invoke ``make qconf`` inside ./scripts/config directory, which results a ``qconf`` executable. This commit removes leftover ``qconf`` executable during ``make config-clean``. Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
* build: bundle-libraries.sh: patch bundled ld.soJo-Philipp Wich2018-02-021-0/+13
| | | | | | | | | | | Remove references to /etc/, /lib/ and /usr/ from the bundled ld.so interpreter using simple binary patching. This is needed to prevent loading host system libraries such as libnss_compat.so.2 on foreign systems, which may result in ld.so inconsistency assertions. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* scripts/qemustart: more portable array operationYousong Zhou2018-01-311-4/+4
| | | | | | | | | | | | | | | | | | The following commands output 1,2,1,1 cmd0='a=("${a[@]}" 'a'); echo "${#a}"' cmd1='a+=('a'); echo "${#a}"' bash -c "$cmd0"; zsh -c "$cmd0" bash -c "$cmd1"; zsh -c "$cmd1" The following outputs 0,1,0,0 cmd2='f() { echo "$#"; }; f "${a[@]}"' cmd3="a=(); $cmd2" bash -c "$cmd2"; zsh -c "$cmd2" bash -c "$cmd3"; zsh -c "$cmd3" Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* metadata: do not emit broken kconfig dependency statementsJo-Philipp Wich2018-01-141-1/+1
| | | | | | | | Prevent emitting broken dependency statements when resolving references to non existing packages to an empty provider list. Fixes: 47d6b05ad3 ("metadata: always resolve dependencies through provides list") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* scripts/feeds: fix install of packages with different source/binary namesMatthias Schiffer2018-01-141-1/+1
| | | | | | | | The logic for choice between source and binary packages was reversed. Fixes: 52719c2b67af "metadata: scripts/feeds: distinguish between source and binary packages, resolve virtual dependencies" Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* metadata: improve code readability by using (s)printf instead of string ↵Matthias Schiffer2018-01-131-13/+13
| | | | | | interpolation Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* build: remove obsolete "package feature" featureMatthias Schiffer2018-01-132-48/+1
| | | | | | | | Package "features" seem to be unused for some time. In any case, custom Config.in snippets and package PROVIDES are a much more flexible way to express similar options. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* metadata: scripts/feeds: distinguish between source and binary packages, ↵Matthias Schiffer2018-01-132-70/+112
| | | | | | | | | | resolve virtual dependencies Properly resolve build depends to source packages and runtime depends to binary packages. Dependencies on virtual packages are resolved to the first provider now. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* metadata: always resolve dependencies through provides listMatthias Schiffer2018-01-133-46/+35
| | | | | | | | | | | Instead of adding virtual packages to the normal package list, keep a separate list for provides, make each package provide itself, and resolve all dependencies through this list. This allows to use PROVIDES to replace existing packages. Fixes FS#837. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* metadata: simplify generation of build depends from runtime dependsMatthias Schiffer2018-01-131-71/+41
| | | | | | | | | | | Runtime depends cannot have a buildtype suffix, and they never refer to source package names. In addition, this adds warnings about unsatisfiable dependencies. Furthermore, this change fixes the generation of conditional build dependencies for virtual packages provided by different source packages. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* metadata: handle target build depends together with host build dependsMatthias Schiffer2018-01-131-32/+28
| | | | | | | | | | | | | | Target build depends are similar to host build depends in that they refer to source packages rather than binary packages. Therefore, it makes sense to handle them together, rather than putting them in a list together with runtime depends and trying to figure out if the entries refer to source or to binary packages afterwards. This does lead to PKG_BUILD_DEPENDS entries referring to binary package names not working anymore, which requires some fixes in the package repositories. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* build: remove package preconfig featureMatthias Schiffer2018-01-132-55/+1
| | | | | | | This feature has been unused for years, and its scope is too limited to be actually useful. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* metadata: remove redundant fields from package hashMatthias Schiffer2018-01-133-8/+9
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* metadata: replace %subdir hash with a path field in source packagesMatthias Schiffer2018-01-132-22/+15
| | | | | | | Every single reference to subdir was concatenated with the source package name, so it makes sense to store the concatenated value instead. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* metadata: change pkg->{src} field to hold a referenceMatthias Schiffer2018-01-133-35/+34
| | | | | | | | We often want to access fields of a source packages through pkg->{src}. Allow accessing them directly instead of resolving the source hash through srcpackages. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* metadata: interate over source packages when generating MakefileMatthias Schiffer2018-01-132-26/+36
| | | | | | | | | | | | All build dependencies are between source packages. Interating over source rather than binary packages simplifies parts of the code and prepares further improvement. As a side effect, this changes the implicit default variant of a few packages (the first defined is used now instead of the lexicographically first). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* metadata: move 'builddepends' from binary to source packagesMatthias Schiffer2018-01-133-21/+21
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* metadata: move 'buildtypes' from binary to source packagesMatthias Schiffer2018-01-132-8/+9
| | | | | | | Build types are a property of source rather than binary packages. This is a preparation for followup cleanup. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* metadata: make srcpackage extensibleMatthias Schiffer2018-01-133-4/+6
| | | | | | | Turn the srcpackage values into hashes to allow storing more information than just binary package names. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* metadata: remove 'base-files' special caseMatthias Schiffer2018-01-131-1/+1
| | | | | | | Nothing explicitly depends on base-files, and even if it would, it would not cause any problems. Remove the unused special case. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* om-fwupgradecfg-gen.sh: add support for the A42Sven Eckelmann2018-01-131-4/+18
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>