aboutsummaryrefslogtreecommitdiffstats
path: root/scripts
Commit message (Collapse)AuthorAgeFilesLines
...
* scripts: ext-toolchain: add option to overwrite configChristian Marangi2022-07-241-4/+18
| | | | | | | | It can be useful to overwrite an already generated config. Option are simply added at the end of the config and make defconfig will overwrite the relevant option with the new one. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* scripts: ext-toolchain: fix wrong prefix in print_config generationChristian Marangi2022-07-241-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | The parsed prefix in print_config is wrong and this produce broken generated .config that won't work with any external toolchain. Currently the prefix from a CC of 'arm-openwrt-linux-muslgnueabi-gcc-12.1.0' produce a prefix 'arm-openwrt-linux-muslgnueabi-gcc-' This is wrong as the real prefix should be 'arm-openwrt-linux-muslgnueabi-' This is probably caused by a change in how the toolchain is now handled that now append also the gcc version. Probably in ancient days the version wasn't part of the name and the prefix generation stripped the '-gcc' instead of the gcc version. Fix this and correctly strip the gcc version and the gcc suffix to correctly call toolchain bins. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ramips: add support for ZyXEL NWA50AX / NWA55AXEDavid Bauer2022-07-201-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Mediatek MT7621 RAM: 256M DDR3 FLASH: 128M NAND ETH: 1x Gigabit Ethernet WiFi: Mediatek MT7915 (2.4/5GHz 802.11ax 2x2 DBDC) BTN: 1x Reset (NWA50AX only) LED: 1x Multi-Color (NWA50AX only) UART Console ------------ NWA50AX: Available below the rubber cover next to the ethernet port. NWA55AXE: Available on the board when disassembling the device. Settings: 115200 8N1 Layout: <12V> <LAN> GND-RX-TX-VCC Logic-Level is 3V3. Don't connect VCC to your UART adapter! Installation Web-UI ------------------- Upload the Factory image using the devices Web-Interface. As the device uses a dual-image partition layout, OpenWrt can only installed on Slot A. This requires the current active image prior flashing the device to be on Slot B. If the currently installed image is started from Slot A, the device will flash OpenWrt to Slot B. OpenWrt will panic upon first boot in this case and the device will return to the ZyXEL firmware upon next boot. If this happens, first install a ZyXEL firmware upgrade of any version and install OpenWrt after that. Installation TFTP ----------------- This installation routine is especially useful in case * unknown device password (NWA55AXE lacks reset button) * bricked device Attach to the UART console header of the device. Interrupt the boot procedure by pressing Enter. The bootloader has a reduced command-set available from CLI, but more commands can be executed by abusing the atns command. Boot a OpenWrt initramfs image available on a TFTP server at 192.168.1.66. Rename the image to owrt.bin $ atnf owrt.bin $ atna 192.168.1.88 $ atns "192.168.1.66; tftpboot; bootm" Upon booting, set the booted image to the correct slot: $ zyxel-bootconfig /dev/mtd10 get-status $ zyxel-bootconfig /dev/mtd10 set-image-status 0 valid $ zyxel-bootconfig /dev/mtd10 set-active-image 0 Copy the OpenWrt ramboot-factory image to the device using scp. Write the factory image to NAND and reboot the device. $ mtd write ramboot-factory.bin firmware $ reboot Signed-off-by: David Bauer <mail@david-bauer.net>
* image: add support for Netgear encrypted imageWenli Looi2022-07-191-0/+68
| | | | | | | | | | | | | | | | | | | | | | | | Netgear encrypted image is used in various devices including WAX202, WAX206, and EX6400v3. This image format also requires a dummy squashfs4 image which is added here as well. References in WAX202 GPL source: https://www.downloads.netgear.com/files/GPL/WAX202_V1.0.5.1_Source.rar * openwrt/bootloader/u-boot-mt7621-2018.09-gitb178829-20200526/board/ralink/common/dual_image.c Bootloader code that verifies the presence of a squashfs4 image, thus a dummy image is added here. * openwrt/tools/imgencoder/src/gj_enc.c Contains code that generates the encrypted image. There is support for adding an RSA signature, but it does not look like the signature is verified by the stock firmware or bootloader. * openwrt/tools/imgencoder/src/imagekey.h Contains the encryption key and IV. It appears the same key/IV is used for other Netgear devices including WAX206 and EX6400v3. Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
* scripts: fix CAMEO tag generatorSander Vanheule2022-07-051-1/+1
| | | | | | | | | | | What should have been only cosmetic changes, ended up in breaking the script. Rename UIMAGE_CRC_SLICE back to (the original) UIMAGE_CRC_OFF. Fixes issue #10204 "cameo-tag.py broken" Reported-by: Markus Stockhausen <markus.stockhausen@gmx.de> Fixes: f9e840b65700 ("scripts: add CAMEO tag generator") Signed-off-by: Sander Vanheule <sander@svanheule.net>
* scripts: add CAMEO tag generatorMarkus Stockhausen2022-07-051-0/+117
| | | | | | | | | | | | This script inserts CAMEO tags into an uImage to make U-Boot of DGS-1210 switches happy. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> Suggested-by: Sander Vanheule <sander@svanheule.net> # Mutual checksum algorithm [commit title prefix, trailing whitespace, OpenWrt capitalisation, move CRC calculation comment, use UIMAGE_NAME_*, remove parentheses for return, use f-string instead of str()] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* scripts: add support for Sercomm PIDMikhail Zhilkin2022-07-031-0/+102
| | | | | | | | | | | | | | | | | | | | This scripts creates Sercomm PID file. PID is necessary for the factory images creation of variuos Sercomm-based devices (Beeline, Netgear, Etisalat). Size: 0x70 +-------+------+---------------+------------------+ | Start | Size | Value* (ASCII)| Description | +=======+======+===============+==================+ | 0x0 | 0x8 | 10100 | Hardware version | +-------+------+---------------+------------------+ | 0x8 | 0x8 | 444245 (DBE) | Hardware ID | +-------+------+---------------+------------------+ | 0x64 | 0x4 | 1002 | Software version | +-------+------+---------------+------------------+ *for Beeline Smartbox GIGA Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* scripts: add support for Sercomm kernel headerMikhail Zhilkin2022-07-031-0/+121
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This scripts creates custom kernel header that necessary for Sercomm mt7621 devices: - Sercomm S3 - Beeline SmartBox Giga - Beeline SmartBox Pro - Beeline Smartbox Turbo - Beeline Smartbox Turbo+ - WiFire S1500.NBN Header format ------------- +--------+---------------+------------------------+ | Offset | Value | Description | +========+===============+========================+ | 0x0 | 53 65 72 00 | Magic "Ser." | +--------+---------------+------------------------+ | 0x4 | 04 00 00 01 | End offset of RootFS | +--------+---------------+------------------------+ | | | This header checksum | | 0x8 | d6 14 9a c1 | htonl(~crc) | +--------+---------------+------------------------+ | 0xc | 02 ff ff ff | Constant | +--------+---------------+------------------------+ | 0x10 | 00 01 40 00 | Kernel start offset | +--------+---------------+------------------------+ | 0x14 | c6 94 24 00 | Kernel length | +--------+---------------+------------------------+ | | | Kernel checksum | | 0x18 | e7 78 89 f1 | htonl(~crc) | +--------+---------------+------------------------+ | 0x1c | 00 00 00 00 | Constant | +--------+---------------+------------------------+ | 0x20 | ff ff ff ff | Constant | +--------+---------------+------------------------+ | 0x24 | ff ff ff ff | Constant | +--------+---------------+------------------------+ | 0x28 | 00 00 00 01 | RootFS offset | +--------+---------------+------------------------+ | | | RootFS length | | 0x2c | 04 00 00 00 | Always 0x4, we check | | | | UBI magic only | +--------+---------------+------------------------+ | | | RootFS checksum | | 0x30 | 1c fc 55 2d | htonl(~crc) | | | | Const for UBI magic | +--------+---------------+------------------------+ | 0x34 | 00 00 00 00 | Constant | +--------+---------------+------------------------+ | 0x38 | ff ff ff ff … | Pad to 0x100 | +--------+---------------+------------------------+ Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* scripts: add cameo image header generatorLuiz Angelo Daros de Luca2022-06-281-0/+86
| | | | | | | | | | The cameo header is a 0x40-byte header used by D-Link DGS 1210 switches and Apresia ApresiaLightGS series. cameo-imghdr.py is a clean-room reimplementation of imghdr present in the DGS-1210-28-GPL package. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> [fix board_version argument's help text] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* build: use numeric-owner in ipkg-buildPaul Spooren2022-04-191-3/+3
| | | | | | | | | | | | | | | | | | | To create packages the `ipkg-build` script is used which double packs `control.tar.gz` and `data.tar.gz` to a single package. By default it's using a verbose username instead of a numeric value for files. Official OpenWrt images (artifacts) are created within docker containers which do not seem to contain those verbose usernames and instead defaults to numeric values. This becomes a problem when rebuilding public artifacts because other build environments may offer verbose usernames and there the created packages is different from the official ones. With this commit `ipkg-build` always uses numeric values for user/group and thereby making it easier to reproduce official artifacts. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: format to blackDoug Kerr2022-04-162-144/+184
| | | | | | clean up formatting with black using 80 character line limit Signed-off-by: Doug Kerr <dek3rr@gmail.com>
* scripts: use std library for jam crc32 calculationDoug Kerr2022-04-162-152/+9
| | | | | | | CRC32 is available in a standard library. It seems reasonable to defer to that rather than run a custom implementation. Signed-off-by: Doug Kerr <dek3rr@gmail.com>
* scripts/gen_image_generic.sh: fix order of files in EFI bootfsDaniel Golle2022-04-151-2/+19
| | | | | | | | | | | | mtools recursive copy (mcopy -s ...) is using READDIR(3) to iterate over the directory entries, hence they end up in the FAT filesystem in traversal order which breaks reproducibility (rather than being added to the FAT filesystem in a reproducible order). Implement recursive copy in gen_image_generic.sh in Shell code instead, as in that way we can force files to be copied in reproducible order. Fixes: aece8f5ae8 ("scripts/gen_image_generic.sh: generate reproducible EFI filesystem") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* scripts/gen_image_generic.sh: generate reproducible EFI filesystemDaniel Golle2022-04-111-2/+3
| | | | | | | | | Generate FAT filesystem for EFI boot in a reproducible way: * use '--invariant' option of mkfs.fat * set timestamps of all files to SOURCE_DATE_EPOCH * make sure files are ordered locale-independent Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* scripts: make sure sort-order is independent from localeDaniel Golle2022-04-061-1/+1
| | | | | | | | Set LC_ALL=C environment variable when calling 'sort' as the sort order otherwise depends on the locale set. Fixes: 56ce110b73 ("scripts: make sure conffiles are sorted") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* scripts: make sure conffiles are sortedPaul Spooren2022-04-011-1/+2
| | | | | | | | | It may happen that conffiles are in different order on different builds. Make sure they have the same order by sorting them. FIX: #9612 Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: store sha256_unsigned in JSONPaul Spooren2022-03-291-4/+12
| | | | | | | | | | | | Introduce `sha256_unsigned` which is a checksum of the image _before_ a signature is attached. This is helpful to compare image reproducibility. Since the `.sha256sum` file is located in the $(KDIR) folder, switch $(BIN_DIR) with $(KDIR) to simplify the code. The value of $(BIN_DIR) itself is not stored inside the resulting JSON file, so it can be replaced. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts/gen_image_generic.sh: make ext4 bootfs reproducibleDaniel Golle2022-03-281-1/+1
| | | | | | | Set fixed timestamp for kernel other files in /boot filesystem. This should help making x86 *combined* images reproducible. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* scripts/mkits.sh: replace forgotten '-' with ${REFERENCE_CHAR}Daniel Golle2022-03-241-1/+1
| | | | | | | Cosmetical change to improve style in mkits.sh. Fixes: fd679086473 ("scripts: mkits.sh: Allow legacy @ mode for dts creation") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* toolchain: binutils: add support for version 2.38Rui Salvaterra2022-03-091-1/+2
| | | | | | | | | | | | While at it, also fix the download.xs4all.nl and add ftp.gnu.org to the GNU mirrors, as it seems to be updated faster. Deleted (upstreamed): 600-Close_the_file_descriptor.patch [1] [1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=5a98fb7513b559e20dfebdbaa2a471afda3b4742 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mkhash: fix build errors on FreeBSD 13.0Georgi Valkov2022-03-051-1/+1
| | | | | | | | | | | | | | be64enc, be16dec, and be32dec are declared on FreeBSD 13.0, in /usr/include/sys/endian.h so we should not declare them. Fixes the following error during feeds update: staging_dir/host/bin/mkhash: No such file or directory gcc scripts/mkhash.c scripts/mkhash.c:111:1: error: redefinition of 'be64enc' 111 | be64enc(void *buf, uint64_t u) Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
* check-toolchain-clean.sh: workaround stray rebuildsPetr Štetiar2022-02-281-2/+7
| | | | | | | | | | | | | | | | It seems, that there are currently some unhandled corner cases in which `.toolchain_build_ver` results in empty file and thus forcing rebuilds, even if the toolchain was build correctly just a few moments ago. Until proper fix is found, workaround that by checking for this corner case and simply populate `.toolchain_build_ver` file. While at it, improve the UX and display version mismatch, so it's more clear what has forced the rebuild: "Toolchain build version changed (11.2.0-1 != ), running make targetclean" References: https://gitlab.com/ynezz/openwrt/-/jobs/2133332533/raw Signed-off-by: Petr Štetiar <ynezz@true.cz>
* check-toolchain-clean.sh: fix shellcheck warningsPetr Štetiar2022-02-281-1/+1
| | | | | | | | | | | Fixes following complaints and suggestions: In scripts/check-toolchain-clean.sh line 2: eval `grep CONFIG_GCC_VERSION .config` ^-- SC2046 (warning): Quote this to prevent word splitting. ^-- SC2006 (style): Use $(...) notation instead of legacy backticks `...`. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts/diffconfig.sh: ensure config/conf is builtEneas U de Queiroz2022-02-261-0/+1
| | | | | | | | | diffconfig.sh runs ./scripts/config/conf, but it does not get built with 'make {menu,x,n}config. Call 'make ./scripts/config/conf' to ensure it's been built before running it, aborting in case of failure. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>[removed Fixes: due revert]
* Revert "scripts/diffconfig.sh: ensure config/conf is built"Petr Štetiar2022-02-241-1/+0
| | | | | | | | | | | | | This reverts commit c0849c1d9c17ba96a37b67363b5551c065e9f50d as it seems to introduce regression in config.buildinfo files produced at least by buildbots: $ curl -s https://downloads.openwrt.org/snapshots/targets/ath79/generic/config.buildinfo | head -2 make[3]: Entering directory '/builder/shared-workdir/build' make[3]: Leaving directory '/builder/shared-workdir/build' References: https://github.com/openwrt/openwrt/issues/9297#issuecomment-1049719381 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts/diffconfig.sh: ensure config/conf is builtEneas U de Queiroz2022-02-221-0/+1
| | | | | | | | diffconfig.sh runs ./scripts/config/conf, but it does not get built with 'make {menu,x,n}config. Call 'make ./scripts/config/conf' to ensure it's been built befpre running it. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* build: scripts/config - update to kconfig-v5.14Eneas U de Queiroz2022-02-1928-3932/+3219
| | | | | | | | | | | | | | | | | | | | | | | | | | Functional Changes ---------- ------- - make 'imply' not impose any restrictions: allow symbols implied by y to become m - change "modules" from sub-option to first-level attribute Bugfixes -------- - nconf: fix core dump when searching in empty menu - nconf: stop endless search loops - xconfig: fix content of the main widget - xconfig: fix support for the split view mode Other Changes ----- ------- - highlight xconfig 'comment' lines with '***' - xconfig: navigate menus on hyperlinks - xconfig: drop support for Qt4 - improve host ncurses detection Update the 'option modules' usage to just 'modules' in Config.in. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* feeds: use git-src-full to allow Git versioningPaul Spooren2022-02-151-2/+2
| | | | | | | | | | | | | | | Both $(AUTORELEASE) and $(PKG_SRC_VERSION) (from luci.git) use the Git log to determine releases and package timestamps. Feeds are shallow cloned by default, resulting in an incomplete Git log and therefore different local package versions than offered upstream. This commits sets the default feeds to use `src-git-full` to solve that. Add fixes from "2b1d92f: scripts/feeds: silence git warning by selecting pull style" to `src-git-full` Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: store source_date_epoch as integerPaul Spooren2022-02-141-1/+1
| | | | | | | | | The value is retreived from a env variable which defaults to be read as a string. However the SOURCE_DATE_EPOCH is a unix timestamp aka integer. Fix this to allow downstream tools to parse the value directly. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts/feeds: install targets to target/linux/feeds and support overridingFelix Fietkau2022-01-241-8/+26
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/feeds: fix installing targets without explicitly specifying the feedFelix Fietkau2022-01-241-0/+2
| | | | | | Add similar code to what is done on packages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* treewide: drop use of whichAnsuel Smith2022-01-174-5/+14
| | | | | | | | | | | | | | Ubuntu started to flag which as deprecated and it seems which is not really standard and may vary across Distro. Drop the use of which and use the standard 'command -v' for this simple task. Which is still present in the prereq if some package/script still use which. A utility script called command_all.sh is implemented that will just mimic the output of which -a. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* scripts: dump-target-info print kernel versionsPaul Spooren2021-12-291-3/+23
| | | | | | | | | | | | | | | | | | | | | | | | | This commits adds the ability to print Kernel versions of all targets/subtargets. If a testing Kernel is set print that version as well. Example output: apm821xx/nand 5.10 apm821xx/sata 5.10 arc770/generic 5.4 archs38/generic 5.4 armvirt/32 5.10 armvirt/64 5.10 at91/sam9x 5.10 at91/sama5 5.10 ath25/generic 5.4 ath79/generic 5.4 5.10 ath79/mikrotik 5.4 5.10 --- %< --- This should help to get a quick update on the state of Kernels. Signed-off-by: Paul Spooren <mail@aparcar.org>
* base-files: add eMMC sysupgrade supportEnrico Mioso2021-12-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Adds generic support for sysupgrading on eMMC-based devices. Provide function emmc_do_upgrade and emmc_copy_config to be used in /lib/upgrade/platform.sh instead of redundantly implementing the same logic over and over again. Similar to generic sysupgrade on NAND, use environment variables CI_KERNPART, CI_ROOTPART and newly introduce CI_DATAPART to indicate GPT partition names to be used. On devices with more than one MMC block device, CI_ROOTDEV can be used to specify the MMC device for partition name lookups. Also allow to select block devices directly using EMMC_KERN_DEV, EMMC_ROOT_DEV and EMMC_DATA_DEV, as using GPT partition names is not always an option (e.g. when forced to use MBR). To easily handle writing kernel and rootfs make use of sysupgrade.tar format convention which is also already used for generic NAND support. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> CC: Li Zhang <li.zhang@gl-inet.com> CC: TruongSinh Tran-Nguyen <i@truongsinh.pro>
* scripts: ubinize-image: make rootfs optionalRobert Marko2021-11-281-20/+23
| | | | | | | | | | | | Currently ubinize-image script always expects the rootfs image to be passed and a volume for it created. So, to allow only ubinizing a kernel for example which the MikroTik hAP ac3 and other new NAND devices from MikroTik require make rootfs an optional parameter like kernel. Signed-off-by: Robert Marko <robimarko@gmail.com>
* toolchain: add a version that can be bumped to force toolchain/target rebuildFelix Fietkau2021-11-161-0/+9
| | | | | | | | This can be used to ensure that the compiled code is up to date, when something important changes in the toolchain. A recent example of this is the gcc 11 fix for a code miscompilation issue Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/env: fix env for git conf init.defaultBranch not set to "master"Arne Zachlod2021-11-131-1/+1
| | | | | | | | | Since version 2.28, git has a config option init.defaultBranch to set the name of the first branch created with git init. The env script expects this name to be "master". This commit sets the initial branch name to "master" instead of using the git configured one. Signed-off-by: Arne Zachlod <arne@nerdkeller.org>
* scripts: fix various typosJosh Soref2021-10-319-14/+14
| | | | | | | | | This only affects typos in comments or user-facing output. Signed-off-by: Josh Soref <jsoref@users.noreply.github.com> [only picks changes to scripts, drop "commandline" replacement, fix case for "arbitrary", improve commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* scripts: eva_ramboot.py: remove unused importJan-Niklas Burfeind2021-10-301-1/+0
| | | | | | | concludes: commit e7bc8984d9ca ("scripts: make eva_ramboot.py offset configurable") Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* base-files, metadata: support additional group membershipDaniel Golle2021-10-281-1/+7
| | | | | | | | | | | | Some packages may require additional group membership for the system user added by that package. Allow defining additional groups as third member of the ':'-separated tuple, allowing to specify multiple ','-separated groups with optional GID. Example: USERID:=foouser=1000:foogroup=1000:addg1=1001,addg2=1002,addg3 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "ethtool: update to v5.14"Hans Dedecker2021-10-231-1/+1
| | | | | | This reverts commit 7630001427fa266fa61da0b2533e2c1054eababe Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ethtool: update to v5.14Hans Dedecker2021-10-231-1/+1
| | | | | | Update to newly released version 5.14 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* scripts/rstrip.sh: do not strip .o files with STRIP_KMODFelix Fietkau2021-10-111-0/+1
| | | | | | Fixes packaging of eBPF modules Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts: package-metadata add pkgmanifestjson callPaul Spooren2021-09-231-0/+36
| | | | | | | | | | The new `pkgmanifestjson` call prints all package manifest of a feed in JSON format. This function can be used to print an overview of packages information used for downstream tooling. The script is entirely based on Petrs work on dependency visualisation. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: store maintainer in package metadataPaul Spooren2021-09-231-0/+1
| | | | | | | The maintainer could be usable for downstream tooling, so start storing it in the metadata. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: mkits.sh: Allow legacy @ mode for dts creationDamien Mascord2021-09-231-10/+13
| | | | | | | | | | | | | | | | | | commit 5ec60cbe9d94 ("scripts: mkits.sh: replace @ with - in nodes") broke support for Meraki MR32 and this patch makes the replacement configurable allowing for specifying the @ or - or whatever character that is desired to retain backwards compatibility with existing devices. For example, this patch includes the fix for the Meraki MR32 in target/linux/bcm53xx/image for meraki_mr32: DEVICE_DTS_DELIMITER := @ DEVICE_DTS_CONFIG := config@1 Fixes: 5ec60cbe9d94 ("scripts: mkits.sh: replace @ with - in nodes") Signed-off-by: Damien Mascord <tusker@tusker.org> [Added tags, checkpatch.pl fixes, noted that this is for old stuff] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* scripts: handle gcc and linux in dl_cleanup scriptAnsuel Smith2021-09-221-2/+2
| | | | | | | | | | | Handle gcc and linux with a special regex that set their progname with their major version. This way every minor version can be cleared. The build cleanup logic can be tweaked later to clean the entire toolchain and target dir with a different gcc version. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [reformat commit message] Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: format dl_cleanup to black format python styleAnsuel Smith2021-09-221-199/+230
| | | | | | Forma dl_cleanup python script to black style. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* scripts: add missing regex for dl_cleanup scriptAnsuel Smith2021-09-221-0/+8
| | | | | | | | | | | | | | | Regex xxx-YYYY-MM-DD-GIT_SHASUM was missing. Add the new regex to improve and better find outdated package. This also fix a bug where some bug were incorrectly detected as packagename-yyyy-mm-dd instead of packagename due to them be parsed by the wrong parser Example: openwrt-keyring-2021-02-20-49283916.tar.xz Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [added example in commit message] Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: store artifacts in JSONPaul Spooren2021-09-141-10/+14
| | | | | | | | | | | | | Multiple profiles create artifacts, these should be stored in the JSON file as well, allowing downstream tooling to show those files, too. Artifacts don't have specific filesystems so only the fields `name`, `type` and `sha256` are available. Rename env variable names from IMAGE_ to FILE_ prefixes to reflect that images, kernels and artifacts are added with the same command. Signed-off-by: Paul Spooren <mail@aparcar.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-28 18:32:30 +0000