aboutsummaryrefslogtreecommitdiffstats
path: root/scripts
Commit message (Collapse)AuthorAgeFilesLines
* build: refactor JSON info files to `profiles.json`Paul Spooren2020-04-032-33/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | JSON info files contain machine readable information of built profiles and resulting images. These files were added in commit 881ed09ee6e2 ("build: create JSON files containing image info"). They are useful for firmware wizards and script checking for reproducibility. Currently all JSON files are stored next to the built images, resulting in up to 168 individual files for the ath79/generic target. This patch refactors the JSON creation to store individual per image (not per profile) files in $(BUILD_DIR)/json_info_files and create an single overview file called `profiles.json` in the target directory. Storing per image files and not per profile solves the problem of parallel file writes. If a profiles sysupgrade and factory image are finished at the same time both processes would write to the same JSON file, resulting in randomly broken outputs. Some target like x86/64 do not use the image code yet, resulting in missing JSON files. If no JSON info files were created, no `profiles.json` files is created as it would be empty anyway. As before, this creation is enabled by default only if `BUILDBOT` is set. Tested via buildroot & ImageBuilder on ath79/generic, imx6 and x86/64. Signed-off-by: Paul Spooren <mail@aparcar.org> [json_info_files dir handling in Make, if case refactoring] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: generate EFI platform bootable images李国2020-03-311-2/+8
| | | | | | | | | | | | | | | | | Add EFI platform bootable images for x86 platforms. These images can also boot from legacy BIOS platform. EFI System Partition need to be fat12/fat16/fat32 (not need to load filesystem drivers), so the first partition of EFI images are not ext4 filesystem any more. GPT partition table has an alternate partition table, we did not generate it. This may cause problems when use these images as qemu disk (kernel can not find rootfs), we pad enough sectors will be ok. Signed-off-by: 李国 <uxgood.org@gmail.com> [part_magic_* refactoring, removed genisoimage checks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts: fixup qemustart for new x86 image namesPaul Spooren2020-03-211-1/+1
| | | | | | | | | | | | qemustart allows easy testing of created images via `qemu`. The script automatically selects created images and can setup e.g. networks. As the x86 target now uses the generic image.mk the profile appears also in the image name, this is *generic*. Add the profile name to the qemustart script so it still finds the file. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: Fix directory symlinks not removed when cleaning STAGING_DIRJeffery To2020-03-011-1/+1
| | | | | | | | | | | | | | | | | | Currently, a symbolic link whose target is a directory will not be removed when cleaning packages from STAGING_DIR. In the first cleaning pass in scripts/clean-package.sh, the -f test for a directory symlink returns false (because the link target is a directory) and so the symlink is not removed. In the second pass, the -d test returns true for a directory symlink, but the symlink is not removed by rmdir because rmdir only removes (real) directories. This updates clean-package.sh to remove all non-directories (including symbolic links) in the first pass. Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* scripts/arm-magic.sh: switch to /bin/shRosen Penev2020-01-021-1/+1
| | | | | | This does not use any special bash stuff. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/env: replace -a and -o with &&/||Rosen Penev2020-01-021-5/+5
| | | | | | | | The former are not well defined. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/env: use explicit find locationRosen Penev2020-01-021-1/+1
| | | | | | | | Some find binaries do not imply the current directory. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/gen-dependencies.sh: use /bin/shRosen Penev2020-01-011-1/+1
| | | | | | This uses no special bash stuff. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/gen-dependencies.sh: replace backticks with $()Rosen Penev2020-01-011-2/+2
| | | | | | Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/mkits.sh: replace legacy backticks with $()Rosen Penev2019-12-311-2/+2
| | | | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com> [adjust commit title and message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* scripts/symlink-tree.sh: use /bin/shRosen Penev2019-12-311-1/+1
| | | | | | This uses nothing bash specific. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/strip-kmod.sh: harmonize leading whitespacesAdrian Schmutzler2019-12-311-1/+1
| | | | | | Convert leading spaces to tabs for consistency in the file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* scripts/strip-kmod.sh: use sh instead of bashRosen Penev2019-12-311-1/+1
| | | | | | There's nothing bash specific here. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/strip-kmod.sh: replace legacy backticks with $()Rosen Penev2019-12-311-1/+1
| | | | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com> [slightly adjusted commit title, added commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* scripts/gen_image_generic.sh: replace deprecated backticks with $()Rosen Penev2019-12-311-1/+1
| | | | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com> [adjust commit title and message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* scripts/gen_image_generic.sh: remove $ in arithmeticRosen Penev2019-12-311-1/+1
| | | | | | | | Fixes shellcheck warning: SC2004: $/${} is unnecessary on arithmetic variables. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/dowload.pl: add archive.apache.org to apache mirror listJiri Kastner2019-12-231-0/+1
| | | | | | | | apache mirrors holds only latest releases, to download older releases, one must use archive.apache.org to get them. Signed-off-by: Jiri Kastner <cz172638@gmail.com>
* scripts/dl_github_archive.py: fix python3 str, bytes confusionYousong Zhou2019-11-041-2/+2
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* build: label kernel and rootfs ext4 volumesYousong Zhou2019-11-031-1/+1
| | | | | | | | | | | UUID of ext4 volumes generated by make_ext4fs are determined by volume label and it will all be 57f8f4bc-abf4-655f-bf67-946fc0f9f25b when label is empty Labeling them does not make them unique but tools like block command from fstools have a better chance differentiating them Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ubinize-image: set image sequence from SOURCE_DATE_EPOCHAlexander Couzens2019-11-031-1/+9
| | | | | | | Set the image sequence number to SOURCE_DATE_EPOCH. If not set, ubinize will use rand() as image sequence. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* build: add script to sign packagesPaul Spooren2019-10-211-0/+27
| | | | | | | | | | | | | | | | | | This script allows image signing indipendend of the actual build process, to run on a master server after receiving freshly backed images. Idea is to avoid storying private keys on third party builders while still beeing to be able to sign packages. Run ./scripts/sign_images.sh with the following env vars: * TOP_DIR where to search for sysupgrade.bin images * BUILD_KEY place of key-build{,.pub,.ucert} * REMOVE_OTHER_SIGNATURES removes signatures added by e.g. buildbots Only sysupgrade.bin files are touched as factory.bin signatures wouldn't be evaluated on stock from. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: create JSON files containing image infoPaul Spooren2019-09-291-0/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The JSON info files contain details about the created firmware images per device and are stored next to the created images. The JSON files are stored as "$(IMAGE_PREFIX).json" and contain some device/image meta data as well as a list of created firmware images. An example of openwrt-ramips-rt305x-aztech_hw550-3g.json { "id": "aztech_hw550-3g", "image_prefix": "openwrt-ramips-rt305x-aztech_hw550-3g", "images": [ { "name": "openwrt-ramips-rt305x-aztech_hw550-3g-squashfs-sysupgrade.bin", "sha256": "db2b34b0ec4a83d9bf612cf66fab0dc3722b191cb9bedf111e5627a4298baf20", "type": "sysupgrade" } ], "metadata_version": 1, "supported_devices": [ "aztech,hw550-3g", "hw550-3g" ], "target": "ramips/rt305x", "titles": [ { "model": "HW550-3G", "vendor": "Aztech" }, { "model": "ALL0239-3G", "vendor": "Allnet" } ], "version_commit": "r10920+123-0cc87b3bac", "version_number": "SNAPSHOT" } Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: fix xconfig targetleo chung2019-09-251-1/+1
| | | | | | | | | | | | | | | | `make xconfig` fails with following linking error of qconf binary: g++ -lQt5Widgets -lQt5Gui -lQt5Core -o qconf qconf.o zconf.tab.o /usr/bin/ld: qconf.o: in function ConfigList::metaObject() const': qconf.cc:(.text+0x3eb): undefined reference to QObjectData::dynamicMetaObject() const' /usr/bin/ld: qconf.o: in function `ConfigList::qt_metacast(char const*)': link error. which is caused by the wrong order of the linked objects/libraries so this patch reorders the linker's arguments which makes the qconf compile again. Signed-off-by: leo chung <gewalalb@gmail.com> [commit subject and message tweaks, whitespace fix] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: fix host menu config targets using ncursesPetr Štetiar2019-09-251-2/+0
| | | | | | | | | | | | | | | | | | | | | On a recent Gentoo Linux installation, invoking `make menuconfig`, `make kernel_menuconfig` or `make kernel_nconfig` in the build system fails, whereas for example `make menuconfig` in the kernel tree alone works as expected. This is happening because STAGING_PREFIX is not defined when kernel's {menu,n}config target calls pkg-config from the toolchain/host and thus pkg-config returns an empty value, and the fallback values in the kernel config script are applied but those are off and the linking fails. Solution is to use system's pkg-config for all ncurses based menu config targets in order to provide proper compiler/linker flags. Ref: FS#2423 Cc: Thomas Albers <thomas.gameiro@gmail.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be> Tested-by: Eneas U de Queiroz <cotequeiroz@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: make device tree arg really optional in mkits.shJohann Neuhauser2019-09-191-5/+4
| | | | | | | | | If no device tree is given there is no node generated, but the configuration does still include the name of the missing node. This will result in a successful build fit image, but bootm does throw a error message if we want to boot the bad configuration. Signed-off-by: Johann Neuhauser <jneuhauser@dh-electronics.com>
* download.dl: fix @KERNEL mirror urlsYousong Zhou2019-09-161-4/+4
| | | | | | | - Prepend "/pub" for mirror.rackspace.com - Use https for download.xs4all.nl and mirrors.mit.edu Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* scripts/feeds: fix accepting "-" in feed type stringFelix Fietkau2019-09-151-1/+1
| | | | | | Fixes a syntax error in processing the type src-git-full Signed-off-by: Felix Fietkau <nbd@nbd.name>
* images: fix boot failures on NAND with small sub pagesJonas Gorski2019-09-143-16/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SquashFS has a minimum block size of at least 1k, so we need to make sure the last data block is also at least that big. This is not an issue on NOR or SD CARD devices, since their rootfs partitions go all the way to the end of the usable space. But on NAND with ubiblock, the rootfs partition will be the exact space, rounded up to LEB size. Unfortunately, some NAND chips with small sub pages have a LEB size of x.5 kiB. This can cause the the last data block to be less than 1k, which will cause the last block to be inaccessible, causing boot failures as seen on MR24: [ 1.532960] block ubiblock0_3: created from ubi0:3(rootfs) [ 1.538457] ubiblock: device ubiblock0_3 (rootfs) set to be root filesystem [ 1.552847] SQUASHFS error: squashfs_read_data failed to read block 0x621472 [ 1.559896] squashfs: SQUASHFS error: unable to read id index table [ 1.566474] VFS: Cannot open root device "(null)" or unknown-block(254,0): error -5 Since on most NOR devices, the start of the squashfs partition is not aligned. Since the start of the rootfs_data partition there is dependend on the SquashFS size, we cannot just always pad it, as the padding could creep into the rootfs_data partition, breaking jffs2. So fix this by ensuring a squashfs rootfs is always a multiple of 1k only for UBI and NAND sysupgrade images. Fixes #2460 without affecting NOR devices. Tested-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* scripts/feeds: fix 'src-include' directiveBjørn Mork2019-09-021-1/+1
| | | | | | | | | | | | Commit 775b70f8d5df renamed parse_file() parameters without updating the recursive call. This broke parsing of any feeds.conf using 'src-include'. $ scripts/feeds update -a Can't use string ("defaults") as a HASH ref while "strict refs" in use at scripts/feeds line 63, <$fh> line 1. Fixes: 775b70f8d5df ("scripts/feeds: allow adding parameters to feeds") Signed-off-by: Bjørn Mork <bjorn@mork.no>
* Fix handling of BUILD_SUFFIX in remote-gdb scriptThomas Langer2019-09-011-4/+4
| | | | | | | | | When CONFIG_BUILD_SUFFIX is enabled, the target-* folders in build_dir and staging_dir have this suffix in the name, but not the toolchain directories. When detecting the names for "arch" and "libc", also accept the suffix and do not use it for the toolchain path. Signed-off-by: Thomas Langer <thomas.langer@intel.com>
* scripts/feeds: allow adding parameters to feedsJo-Philipp Wich2019-08-281-18/+30
| | | | | | | | | this allows adding "--" prefixed parameters inside feeds.conf between the target and name. The first parameter is --force which has the same effect as using -f when installing any of the packages. This allows creating feeds that will override base packages by default. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* scripts/dl_github_archive.py: fix python3 transitionYousong Zhou2019-08-201-4/+5
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* download.pl: use https://source.openwrt.orgYousong Zhou2019-08-181-2/+1
| | | | | | | | https://sources.lede-openwrt.org now redirects to there https://downloads.openwrt.org/sources returns 404, so remove it here Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* build: allow overriding default selection state for devicesJonas Gorski2019-08-132-2/+4
| | | | | | | | | | | | | | | | | | | Allow overriding the default selection state for Devices, similar to setting a default for packages. E.g. by setting DEFAULT to n, they won't be selected by default anymore when enabling all device in the multi device profile. This allows preventing images being built by the default config for known broken devices, devices without enough RAM/flash, or devices not working with a certain kernel versions. This does not prevent the devices from being manually selected or images being built by the ImageBuilder. These devices often still have worth with a reduced package-set, or as a device for regression testing, when no better device is available. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* scripts/ubinize-image.sh: fix buildbot breakagePetr Štetiar2019-07-301-1/+1
| | | | | | | | | | | | | | New Docker based buildslaves install just bare minimum of packages, thus not having bsdmainutils package installed which provides `hexdump` utility, leading to the following build breakage on buildbots: ubinize-image.sh: 12: /builder/scripts/ubinize-image.sh: hexdump: not found So this patch simply replaces `hexdump` with `od` utility provided by coreutils package, which should be likely available. Co-authored-by: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts/jungo-image: convert to Python 3 with 2-to-3Petr Štetiar2019-07-261-26/+26
| | | | | | Let's convert the script to Python 3. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts/dl_github_archive.py: convert to Python 3 with 2-to-3Petr Štetiar2019-07-261-5/+5
| | | | | | Let's convert the script to Python 3. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts: time.pl: Don't print the time on stderrAlban Bedel2019-07-031-1/+1
| | | | | | | | | Having the build time written on stderr make it appear with V=w although it is not an error or warning. Just write the time on stdout to have it part of the build log like all the rest, but not clutter the output when only warnings and errors should be shown. Signed-off-by: Alban Bedel <albeu@free.fr>
* scripts/feeds: add src-include methodBjørn Mork2019-07-011-11/+26
| | | | | | | | | | | | The src-include method allows recursive inclusion of feeds.conf snippets. This can for example be used for adding static local feeds to feeds.conf.default without ever having to update the local feeds.conf: src-include defaults feeds.conf.default src-link custom /usr/local/src/lede/custom Signed-off-by: Bjørn Mork <bjorn@mork.no>
* metadata: handle ABI version rebuild tracking for transient dependenciesJo-Philipp Wich2019-06-211-0/+12
| | | | | | | | | | | | Extend the packageauxvars database to keep a list of possible package dependencies for each provider, then utilize this information in buildroot to resolve the ABI version dependencies of dependent packages up to five levels deep. This should properly trigger rebuilds for packages indirectly depending on other packages whose ABI_VERSION changed. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* scripts/config: fix *c_shipped build depency trackingJonas Gorski2019-06-201-4/+4
| | | | | | | | | | | | | The Makefile was missing dependencies on *c_shipped, so changes never triggered a rebuild. Add these as optional dependencies so their absence isn't treated as an error. In addition, fix a typo preventing the zconf.lex.o from being removed on clean. Fixes: 9d5510a500a1 ("build: add new menuconfig code based on linux 3.9") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Jo-Philipp Wich <jo@mein.io>
* metadata: ensure one dependency provider to be y if a package is yJonas Gorski2019-06-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | When there are multiple packages providing a meta-package, it is possible to to create a config where a package is selected as =y, but all of its dependency providers are just selected as =m. This is due to the selection statement being just config PACKAGE_foo select PACKAGE_bar if !PACKAGE_baz which is already fulfilled by PACKAGE_bar=m. Fix this by properly comparing the selection states: config PACKAGE_foo select PACKAGE_bar if PACKAGE_baz<PACKAGE_foo Also invert the select conditions to improve readability. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> [slightly reword commit message] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* config: fix relational operators for bool and tristate symbolsNicolas Pitre2019-06-201-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 31847b67bec0 ("kconfig: allow use of relations other than (in)equality") it is possible to use relational operators in Kconfig statements. However, those operators give unexpected results when applied to bool/tristate values: (n < y) = y (correct) (m < y) = y (correct) (n < m) = n (wrong) This happens because relational operators process bool and tristate symbols as strings and m sorts before n. It makes little sense to do a lexicographical compare on bool and tristate values though. Documentation/kbuild/kconfig-language.txt states that expression can have a value of 'n', 'm' or 'y' (or 0, 1, 2 respectively for calculations). Let's make it so for relational comparisons with bool/tristate expressions as well and document them. If at least one symbol is an actual string then the lexicographical compare works just as before. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [rebased against OpenWrt kconfig, slightly reword commit message] (backported from upstream 9059a3493efea6492451430c7e2fa0af799a2abb) Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* config: regenerate *_shipped sourcesJonas Gorski2019-06-202-243/+302
| | | | | | | | | | | | The pregenerated `zconf.hash.c` and `zconf.lex.c` files have not been kept in sync with their respective `*.y` and `*.l` sources in the past causing our kconfig implementation to not recognize important kconfig grammer elements such as relational `<`, `<=`, `>` and `>=` operators. Fixes: 2d7e602381f3 ("scripts/config: sync with latest linux upstream") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> [reword commit message] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* toolchain: Add GCC 9.1.0 releaseJoseph Benden2019-06-161-1/+1
| | | | | | | | | | | | | Most of the patches are copied over from GCC 8.3. The following patches are backported from the GCC 9.X development branch: toolchain/gcc/patches/9.1.0/970-recompute-dom-fast-queries-before-vn.patch toolchain/gcc/patches/9.1.0/975-g++-ICE-with-generic-lambda.patch The specs file changed with gcc 9, now it contains "%@{L*}" instead of "%{L*}" in older GCC versions. Signed-off-by: Joseph Benden <joe@benden.us>
* build: add support to && in DEPENDSEneas U de Queiroz2019-05-311-2/+18
| | | | | | | | | | | | Adds support to && operand in DEPENDS. Also, fixes generation of || dependencies by scripts/package-metadata.pl. The precedence order from higher to lower is && then ||. Use of parentheses to change the order is not supported. As before, they are silently ignored. Use them for readability only. Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [DMARC removal]
* build: fix STAGING_DIR cleaning when filenames contain spacesJeffery To2019-05-171-0/+1
| | | | | | | | | | | | When looping through a package's STAGING_FILES_LIST (a list of file/directory paths delimited by newlines), if the path contains spaces, then the path will be split by the while loops, and the file/directory will not be deleted/removed. This sets the internal field separator to the newline only so that the entire path is considered when deleting/removing. Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* build: add a config option for enabling a testing version of the target kernelFelix Fietkau2019-05-112-5/+13
| | | | | | | If the target supports a newer kernel version that is not used by default yet, it can be enabled with this option Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/qemustart: add notes on adding new optionsYousong Zhou2019-04-261-0/+5
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* scripts/qemustart: fix network device emulationYousong Zhou2019-04-261-11/+17
| | | | | | | | We only enabled pcnet driver for malta machine, and x86/legacy target was supposed to only support e1000 model Cc: Petr Štetiar <ynezz@true.cz> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>