aboutsummaryrefslogtreecommitdiffstats
path: root/scripts
Commit message (Collapse)AuthorAgeFilesLines
* scripts: format dl_cleanup to black format python styleAnsuel Smith2021-09-221-199/+230
| | | | | | Forma dl_cleanup python script to black style. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* scripts: add missing regex for dl_cleanup scriptAnsuel Smith2021-09-221-0/+8
| | | | | | | | | | | | | | | Regex xxx-YYYY-MM-DD-GIT_SHASUM was missing. Add the new regex to improve and better find outdated package. This also fix a bug where some bug were incorrectly detected as packagename-yyyy-mm-dd instead of packagename due to them be parsed by the wrong parser Example: openwrt-keyring-2021-02-20-49283916.tar.xz Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [added example in commit message] Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: store artifacts in JSONPaul Spooren2021-09-141-10/+14
| | | | | | | | | | | | | Multiple profiles create artifacts, these should be stored in the JSON file as well, allowing downstream tooling to show those files, too. Artifacts don't have specific filesystems so only the fields `name`, `type` and `sha256` are available. Rename env variable names from IMAGE_ to FILE_ prefixes to reflect that images, kernels and artifacts are added with the same command. Signed-off-by: Paul Spooren <mail@aparcar.org>
* base-files: rename 'sdcard' to 'legacy-sdcard'Daniel Golle2021-08-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While an image layout based on MBR and 'bootfs' partition may be easy to understand for users who are very used to the IBM PC and always have the option to access the SD card outside of the device (and hence don't really depend on other recovery methods or dual-boot), in my opinion it's a dead end for many desirable features on embedded systems, especially when managed remotely (and hence without an easy option to access the SD card using another device in case things go wrong, for example). Let me explain: * using a MSDOS/VFAT filesystem to store kernel(s) is problematic, as a single corruption of the bootfs can render the system into a state that it no longer boots at all. This makes dual-boot useless, or at least very tedious to setup with then 2 independent boot partitions to avoid the single point of failure on a "hot" block (the FAT index of the boot partition, written every time a file is changed in bootfs). And well: most targets even store the bootloader environment in a file in that very same FAT filesystem, hence it cannot be used to script a reliable dual-boot method (as loading the environment itself will already fail if the filesystem is corrupted). * loading the kernel uImage from bootfs and using rootfs inside an additional partition means the bootloader can only validate the kernel -- if rootfs is broken or corrupted, this can lead to a reboot loop, which is often a quite costly thing to happen in terms of hardware lifetime. * imitating MBR-boot behavior with a FAT-formatted bootfs partition (like IBM PC in the 80s and 90s) is just one of many choices on embedded targets. There are much better options with modern U-Boot (which is what we use and build from source for all targets booting off SD cards), see examples in mediatek/mt7622 and mediatek/mt7623. Hence rename the 'sdcard' feature to 'legacy-sdcard', and prefix functions with 'legacy_sdcard_' instead of 'sdcard_'. Tested-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: add generic sdcard upgrade methodStijn Tintel2021-08-071-0/+1
| | | | | | | | Add a generic sdcard upgrade method instead of duplicating code in yet another target, and add a feature flag to only install this upgrade method in targets that set this flag. Copied from mvebu. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* scripts/target-metadata.pl: order features alphabeticallyStijn Tintel2021-08-071-23/+23
| | | | | | We generaly do this in many other places, so let's do it here also. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* scripts/mkits.sh: Fix the hash algorithm paramterYonghyu Ban2021-07-181-2/+2
| | | | | | | | | | | The mkits.sh script help message states hash algorithm can be specified using the -H command-line option, but it does not work currently due to a bug in the script. This patch fixes this problem by changing the option from -S to -H and specify getopts parameter after it Signed-off-by: Yonghyu Ban <yonghyu@empo.im>
* scripts: check if dl directory exist in dl_cleanup scriptAnsuel Smith2021-07-051-0/+5
| | | | | | Check if the provided dl directory exist and return on error. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* build,json: fix generation with empty profilesPaul Spooren2021-06-201-1/+1
| | | | | | | | If the image generation doesn't add any profiles to the output the *profile merge* will fail. To avoid that set an empty profile as fallback. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: preserve profiles.json between buildsMoritz Warning2021-06-161-9/+23
| | | | | | | | | | | | | Keep other profiles.json content if the data belongs to the current build version. Also useful for the ImageBuilder, which builds for a single model each time. Without this commit the profiles.json would only contain the latest build profile information. Signed-off-by: Moritz Warning <moritzwarning@web.de> [improve commit message] Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts/feeds: generate index after all feeds are updatedKarel Kočí2021-06-071-44/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This separates index update from feed update. The result is that all requested feeds are first updated and only then indexed. The reason for this change is to prevent errors being reported and potentially invalid index being generated thanks to cross feeds dependency. The feeds script pulls in default all feeds as they come and on install prefers packages from first feeds (unless special feed is requested). Thus order of feeds in some way specifies preferences. This is handy for downstream distributions as they can simply override any package from upstream feeds by placing their feed before them. This removes need to patch or fork upstream feeds. The problem is that such feed most likely depends in some way also on subsequent feeds. The most likely feeds are 'packages' or 'luci'. The example would be Python package that needs 'python.mk' from 'packages' feed. Ordering custom feed after dependent feeds is sometimes just not possible because of preference requirement described before. The solution is to just first pull all feeds and generate indexes only after that. In the end this ensures that index is generated correctly at first try without any error. In terms of code this removes 'perform_update' argument from 'update_feed' as with index update removal the update is the only action performed in that subroutine. Thus this moves condition to 'update' subroutine. Signed-off-by: Karel Kočí <karel.koci@nic.cz>
* scripts: config.guess: update to 2021-05-24Paul Spooren2021-05-292-498/+788
| | | | | | | | | | | | This script hasn't seen an update in multiple years, update it to the latest version provided upstream. Both `config.guess` and `config.sub` are copied from upstream[1] and not modified. The full changelog is available within the upstream repository[1]. [1]: https://git.savannah.gnu.org/git/config.git Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: introduce $(MKHASH)Leonardo Mörlein2021-05-135-11/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before this commit, it was assumed that mkhash is in the PATH. While this was fine for the normal build workflow, this led to some issues if make TOPDIR="$(pwd)" -C "$pkgdir" compile was called manually. In most of the cases, I just saw warnings like this: make: Entering directory '/home/.../package/gluon-status-page' bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found bash: line 1: mkhash: command not found [...] While these were only warnings and the package still compiled sucessfully, I also observed that some package even fail to build because of this. After applying this commit, the variable $(MKHASH) is introduced. This variable points to $(STAGING_DIR_HOST)/bin/mkhash, which is always the correct path. Signed-off-by: Leonardo Mörlein <me@irrelefant.net>
* build,json: 3rd fixup of default_packagesPaul Spooren2021-03-251-18/+5
| | | | | | | | | | | | | | | | | | | | This became a bit of a tragedy, caused by a corner cases which wasn't put into account during testing. DEFAULT_PACKAGES are defined in target/linux/<target>/Makefile but also in target/linux/<target>/<subtarget>/target.mk. The latter was no longer imported when using DUMP=1, however not using DUMP=1 while running the Makefile in target/linux/<target>/ caused duplicate packages in the list. As a solution, which should have been used from day 0, `make` runs in target/linux/ without DUMP=1, resulting in no duplicate packages and all inclusions from include/target.mk, linux/target/<target>/{Makefile, <subtarget>/target.mk} While at it, sort the list of default packages. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build,json: fixup fixup of arch_packagesPaul Spooren2021-03-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit "1bf2b3fe90 build,json: fixup missing arch_packages" fixes the missing package architecture locally but runs $(TOPDIR)/Makefile rather than a target specific one. While this works on local builds just fine, it causes the buildbots to add garbage to the `arch_packages` variable: cd \"/builder/shared-workdir/build\"; git log --format=%h -1 toolchain > /builder/shared-workdir/build/tmp/.ver_check\ncmp -s /builder/shared-workdir/build/tmp/.ver_check /builder/shared-workdir/build/staging_dir/toolchain-x86_64_gcc-8.4.0_musl/stamp/.ver_check || { \\\n\trm -rf /builder/shared-workdir/build/build_dir/target-x86_64_musl /builder/shared-workdir/build/staging_dir/target-x86_64_musl /builder/shared-workdir/build/staging_dir/toolchain-x86_64_gcc-8.4.0_musl /builder/shared-workdir/build/build_dir/toolchain-x86_64_gcc-8.4.0_musl; \\\n\tmkdir -p /builder/shared-workdir/build/staging_dir/toolchain-x86_64_gcc-8.4.0_musl/stamp; \\\n\tmv /builder/shared-workdir/build/tmp/.ver_check /builder/shared-workdir/build/staging_dir/toolchain-x86_64_gcc-8.4.0_musl/stamp/.ver_check; \\\n}\nx86_64 Only the last line contains the desired string. Future investigation should check why the build system prints this to stdout rather than stderr. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build,json: fixup missing arch_packagesPaul Spooren2021-03-241-4/+15
| | | | | | | | | | | | Fix 7f4c2b1 "build,json: fix duplicates in default_packages" which removed duplicate default packages but also removed the package architecture from the profiles.json. If DUMP=1 is set, the `ARCH_PACKAGES` is no longer exported and therefore empty. Fix this by running make twice, once with DUMP=1 and once without. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build,json: fix duplicates in default_packagesPaul Spooren2021-03-201-1/+2
| | | | | | | | | | | | | Calling without the DUMP=1 argument causes the target specific Makefile to be "included" again which adds the target specific packages twice, once on the actual run and once included from `include/target.mk`. This led to duplicate package entries, causing confusion in downstream projects using the generated JSON files. While at it, apply `black` style to Python script. Signed-off-by: Paul Spooren <mail@aparcar.org>
* include/image*: add support for device-tree overlaysDaniel Golle2021-03-171-0/+1
| | | | | | | | | | | Add new target feature 'dt-overlay' which makes DTC keep the symbol names in the generated dtb. Make sure additional DT overlay sources specified by the new device variable DEVICE_DTS_OVERLAY get compiled together with the main DTS (currently overlays got to be in the same folder). Let Build/fit pass the generated DT overlay blobs to mkits.sh. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* scripts/mkits.sh: add support for adding DT overlay blobs to imageDaniel Golle2021-03-171-2/+56
| | | | | | | | | | | | Allow adding multiple device tree overlay blobs to an image and generate configurations for each of them. This is useful on boards with modern U-Boot which allow e.g. user- configurable peripherals ("shields") in that way. Note that currently, each generated configuration adds exactly one overlay on top of the base image, ie. adding multiple overlays at the same time is not yet supported. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* scripts,ipkg-build: use realpath for pkg_dirPaul Spooren2021-03-141-1/+1
| | | | | | | This allows manual execution of the ipkg-build script even with releative path. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts,ipkg-build: apply shellcheckPaul Spooren2021-03-141-41/+40
| | | | | | | | | | | This commit cleans the `ipkg-build` script via changes suggested by shellcheck. These are mostly word splitting issues. Remove the definition of GZIP, this adds three "lookups" of the `gzip` binary but the rest of the build system doesn't seem to use such improvements neither. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: mkits.sh: replace @ with - in nodesRobert Marko2021-03-051-8/+8
| | | | | | | | | | | | | | | U-boot will reject the nodes with @ for the address since commit: https://gitlab.denx.de/u-boot/u-boot/-/commit/79af75f7776fc20b0d7eb6afe1e27c00fdb4b9b4 This in turn will cause the failure to boot with OpenWrt generated images. So, to rectify that simply replace @ with -. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cover also newly added rootfs@1 and initrd@1 nodes) Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* treewide: fix spelling 'seperate' -> 'separate'Daniel Golle2021-02-281-1/+1
| | | | | | | This popular spelling mistake was also introduced by myself lately. Fix it everywhere. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* download: add mirror alias for DebianDavid Bauer2021-02-261-0/+4
| | | | | | | Add an alias for Debian packages and download them from the Debian mirror redirector. Signed-off-by: David Bauer <mail@david-bauer.net>
* download: use mirror redirector for GNOME downloadsDavid Bauer2021-02-261-0/+1
| | | | | | | Use the GNOME mirror redirector as the primary download source for GNOME packages. Signed-off-by: David Bauer <mail@david-bauer.net>
* treewide: rename IMAGE_PREFIX/IMAGE_NAME to DEVICE_IMG_*Adrian Schmutzler2021-02-251-3/+3
| | | | | | | | | | | | | | We so far had two variables IMG_PREFIX and IMAGE_PREFIX with different content. Since these names are obviously quite confusing, this patch renames the latter to DEVICE_IMG_PREFIX, as it's a device-dependent variable, while IMG_PREFIX is only (sub)target-dependent. For consistency, also rename IMAGE_NAME to DEVICE_IMG_NAME, as that's a device-dependent variable as well. Cc: Paul Spooren <mail@aparcar.org> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* image: allow building FIT and uImage with ramdiskDaniel Golle2021-02-242-1/+28
| | | | | | | | | | | | | Instead of embedding the initrd cpio archive into the kernel, allow for having an external ramdisk added to the FIT or uImage. This is useful to overcome kernel size limitations present in many stock bootloaders, as the ramdisk is then loaded seperately and doesn't add to the kernel size. Hence we can have larger ramdisks to host ie. installers with all binaries to flash included (or a web-based firmware selector). In terms of performance and total size the differences are neglectible. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* image: add support for building FIT image with filesystemDaniel Golle2021-02-241-4/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow for single (external-data) FIT image to hold kernel, dtb and squashfs. In that way, the bootloader verifies the system integrity including the rootfs, because what's the point of checking that the hash of the kernel is correct if it won't boot in case of squashfs being corrupted? Better allow bootloader to check everything needed to make it at least up to failsafe mode. As a positive side effect this change also makes the sysupgrade process on nand potentially much easier as it is now. In short: mkimage has a parameter '-E' which allows generating FIT images with 'external' data rather than embedding the data into the device-tree blob itself. In this way, the FIT structure itself remains small and can be parsed easily (rather than having to page around megabytes of image content). This patch makes use of that and adds support for adding sub-images of type 'filesystem' which are used to store the squashfs. Now U-Boot can verify the whole OS and the new partition parsers added in the Linux kernel can detect the filesystem sub-images, create partitions for them, and select the active rootfs volume based on the configuration in FIT (passing configuration via device tree could be implemented easily at a later stage). This new FIT partition parser works for NOR flash (on top of mtdblock), NAND flash (on top of ubiblock) as well as classic block devices (ie. eMMC, SDcard, SATA, NVME, ...). It could even be used to mount such FIT images via `losetup -P` on a user PC if this patch gets included in Linux upstream one day ;) Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* download: remove broken mirrorsDavid Bauer2021-02-221-2/+0
| | | | | | These mirrors don't exist anymore. Remove them. Signed-off-by: David Bauer <mail@david-bauer.net>
* Mostly revert "build: add support for fixing up library soname"Felix Fietkau2021-02-151-73/+0
| | | | | | | | | This reverts commit b12288fa69b171f7c9405518c9bed3581a06f7ce. The patchelf approach is too fragile, and the only users of this have been converted to make patching unnecessary Leave the abi_version_str variable in place in rules.mk Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: drop ABI version from metadataFelix Fietkau2021-02-142-16/+0
| | | | | | | Preparation for supporting dynamic ABI versions that depend on the runtime configuration. Read the suffix from the staging dir pkginfo version files. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: add support for fixing up library sonameFelix Fietkau2021-02-141-0/+73
| | | | | | | | | | This makes it possible to declare a package ABI_VERSION independent from the upstream soname by setting PKG_ABI_VERSION in the package makefile. The library filename is fixed up for files installed to packages and to the staging dir. References to the original from executables within the same package are also fixed up Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts: fix checkpatch.pl for changed license dirPaul Spooren2021-02-141-1/+1
| | | | | | | As multiple LICENSES are shipped and no longer just LICENSE, modify the OpenWrt tree detection in checkpatch.pl. Signed-off-by: Paul Spooren <mail@aparcar.org>
* treewide: unify OpenWrt hosted source via @OPENWRTPaul Spooren2021-02-051-0/+2
| | | | | | | | | | | Multiple sources are hosted on OpenWrts source server only. The source URLs to point to the server vary based on different epochs in OpenWrts history. Replace all by @OPENWRT which is an "empty" mirror, therefore using the fallback servers sources.cdn.openwrt.org and sources.openwrt.org. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: sources CDN as fallback in download.plPaul Spooren2021-01-271-1/+1
| | | | | | | | | In case the default sources for a package fail use the CDN rather than our own mirror. In case the CDN fails, fallback to our mirror. Also remove mirror1 which isn't available anymore. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: target-metadata don't add PROFILES twicePaul Spooren2021-01-141-1/+2
| | | | | | | | | | | | | | | Since 4ee3cf2b5a profiles with alternative vendor names may appear multiple times in `tmp/.targetinfo` or `.targetinfo` (for ImageBuilders). The `target-metadata.pl` script adds these profiles then twice to `PROFILE_NAMES` and the ImageBuilder show the profile twice when running `make info`. This patch removes duplicate profile IDs and only adds them once to `.profiles.mk`. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts/feed: no warn on toolchain/linux overwritePaul Spooren2021-01-061-1/+3
| | | | | | | | | | | The recent 7f285d "scripts/feeds: warn when skipping core package override" floods SDK output with warning of overwriting "linux" and "toolchain" core packages. This should be ignored as these are not regular packages added via feeds. While at it slightly improve the warning string. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: drop clang wrapperKevin Darbyshire-Bryant2021-01-051-12/+0
| | | | | | | clang's gcc emulation does the right thing with -print-file-name now, drop the wrapper Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* scripts/qemustart: use squashfs instead of ext4Paul Spooren2021-01-011-1/+1
| | | | | | | | | The qemustart script currently picks the ext4 filesystem rather than squashfs, while the latter is default for nearly all OpenWrt targets. Change the default behaviour of qemustart to be in line with the rest. Signed-off-by: Paul Spooren <mail@aparcar.org>
* ipq40xx: add support for Plasma Cloud PA2200Marek Lindner2020-12-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications: * QCA IPQ4019 * 256 MB of RAM * 32 MB of SPI NOR flash (w25q256) - 2x 15 MB available; but one of the 15 MB regions is the recovery image * 2T2R 2.4 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=PlasmaCloud-PA2200 * 2T2R 5 GHz (channel 36-64) - QCA9888 hw2.0 (PCI) - requires special BDF in QCA9888/hw2.0/board-2.bin bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA2200 * 2T2R 5 GHz (channel 100-165) - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=PlasmaCloud-PA2200 * GPIO-LEDs for 2.4GHz, 5GHz-SoC and 5GHz-PCIE * GPIO-LEDs for power (orange) and status (blue) * 1x GPIO-button (reset) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x gigabit ethernet - phy@mdio3: + Label: Ethernet 1 + gmac0 (ethaddr) in original firmware + used as LAN interface - phy@mdio4: + Label: Ethernet 2 + gmac1 (eth1addr) in original firmware + 802.3at POE+ + used as WAN interface * 12V 2A DC Flashing instructions: The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Marek Lindner <marek.lindner@kaiwoo.ai> [sven@narfation.org: prepare commit message, rebase, use all LEDs, switch to dualboot_datachk upgrade script, use eth1 as designated WAN interface] Signed-off-by: Sven Eckelmann <sven@narfation.org>
* ipq40xx: add support for Plasma Cloud PA1200Marek Lindner2020-12-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications: * QCA IPQ4018 * 256 MB of RAM * 32 MB of SPI NOR flash (w25q256) - 2x 15 MB available; but one of the 15 MB regions is the recovery image * 2T2R 2.4 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA1200 * 2T2R 5 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=PlasmaCloud-PA1200 * 3x GPIO-LEDs for status (cyan, purple, yellow) * 1x GPIO-button (reset) * 1x USB (xHCI) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x gigabit ethernet - phy@mdio4: + Label: Ethernet 1 + gmac0 (ethaddr) in original firmware + used as LAN interface - phy@mdio3: + Label: Ethernet 2 + gmac1 (eth1addr) in original firmware + 802.3af/at POE(+) + used as WAN interface * 12V/24V 1A DC Flashing instructions: The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Marek Lindner <marek.lindner@kaiwoo.ai> [sven@narfation.org: prepare commit message, rebase, use all LEDs, switch to dualboot_datachk upgrade script, use eth1 as designated WAN interface] Signed-off-by: Sven Eckelmann <sven@narfation.org>
* ath79: Add support for Plasma Cloud PA300Sven Eckelmann2020-12-221-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications: * Qualcomm/Atheros QCA9533 v2 * 650/600/217 MHz (CPU/DDR/AHB) * 64 MB of RAM * 16 MB of SPI NOR flash (mx25l12805d) - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2x 10/100 Mbps Ethernet * 2T2R 2.4 GHz Wi-Fi * multi-color LED (controlled via red/green/blue GPIOs) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x fast ethernet - eth0 + Label: Ethernet 1 + 24V passive POE (mode B) + used as WAN interface - eth1 + Label: Ethernet 2 + 802.3af POE + builtin switch port 2 + used as LAN interface * 12-24V 1A DC * internal antennas Flashing instructions: The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Sven Eckelmann <sven@narfation.org>
* images: Fix sysupgrade.tar for devices with NOR flashSven Eckelmann2020-12-221-1/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NOR flash rootfs images stored in a sysupgrade.tar must end with the JFFS2 marker. Otherwise, devices like OpenMesh A42/A62 are not able to calculate the md5sum of the fixed squashfs part and store it inside the u-boot-env. But the commit ee76bd11bbe7 ("images: fix boot failures on NAND with small sub pages") adds up to 1020 0x00 bytes after the 0xdead0de EOF marker. The calculated md5sum will be wrong due do this change and u-boot will fail to boot the newly flashed device with a message like: Validating MD5Sum of 'vmlinux'... Passed! Validating MD5Sum of 'rootfs'... Failed! 583a1b7b54b8601efa64ade42742459b != 8850ee812dfd7638e94083329d5d2781 Data validation failed! and boot the old image again. Since the original change should not change the behavior of NOR images, just check for the deadc0de marker at the end of the squashfs-jffs2 image do avoid the problematic behavior for these images. Fixes: ee76bd11bbe7 ("images: fix boot failures on NAND with small sub pages") Signed-off-by: Sven Eckelmann <sven@narfation.org>
* scripts/om-fwupgradecfg-gen.sh: Generate checksum over whole squashfsSven Eckelmann2020-12-221-6/+3
| | | | | | | | | | | The rootfs is padded to the full block size by padjffs2 and a 4 byte magic value ("deadc0de") is added to the end. On first boot, the JFFS2 is replacing the "deadc0de" marker when the rootfs_data is initialized. The static part of the rootfs is therefore $rootfs_size - 4 and not $rootfs_size - 262144 - 4. Signed-off-by: Sven Eckelmann <sven@narfation.org>
* scripts/om-fwupgradecfg-gen.sh: Drop block alignment codeSven Eckelmann2020-12-221-5/+1
| | | | | | | The padding and block alignment is handled by the image build script and doesn't need to be duplicated in the fwupgrade.cfg build script. Signed-off-by: Sven Eckelmann <sven@narfation.org>
* scripts: add -N option to mkhash for printing without newlineINAGAKI Hiroshi2020-12-221-7/+13
| | | | | | Added "-N" option, it allow printing hash(es) without newline. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* build/json: add filesystem informationPaul Spooren2020-12-131-0/+1
| | | | | | | | Some images are created using different filesystems, most popular squashfs and ext4. To allow downstream projects to distinguesh between those, add the `filesystem` information to created json files. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts/feeds: fix preference of package installKarel Kočí2020-12-091-16/+14
| | | | | | | | | | | | | | The previous behavior prefered same feed for dependent packages as initial package. This caused inconsitency in installation of packages. The difference was if two feeds provide same package (different version) there was different result if you executed install for that specific version compared to install for package depending on it from different feed. This ensures that preferred feed is propagated without change and selected feed is used only really for package it was selected for. Signed-off-by: Karel Kočí <karel.koci@nic.cz>
* scripts/feeds: warn when skipping core package overrideBrian Norris2020-12-091-1/+4
| | | | | | | | | | Otherwise, a n00b like myself can get quite confused when moving a package from core to feeds, for example. (Hint: one *really* needs to clear out the tmp/info/.packageinfo... entries for the stale package, but '-f' works as well.) Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* build: mkhash on FreeBSDPiotr Stefaniak2020-11-271-0/+7
| | | | | | | | Apply patch from https://bugs.openwrt.org/index.php?do=details&task_id=971 in order to make it easier to build OpenWRT on FreeBSD. Signed-off-by: Piotr Stefaniak <pstef@freebsd.org>