aboutsummaryrefslogtreecommitdiffstats
path: root/scripts/om-fwupgradecfg-gen.sh
Commit message (Expand)AuthorAgeFilesLines
* build: use mkhash to replace various quirky md5sum/openssl callsFelix Fietkau2017-01-051-5/+5
* scripts/om-fwupgradecfg-gen.sh: add support for the OM5P-ACJohn Crispin2016-04-091-2/+2
* scripts/om-fwupgradecfg-gen.sh: Generate sha256sum for uboot verificationJohn Crispin2016-04-091-0/+4
* scripts/om-fwupgradecfg-gen.sh: add support for the MR1750John Crispin2015-09-141-2/+2
* scripts/om-fwupgradecfg-gen.sh: Fix u-boot image md5sum checkJohn Crispin2015-09-141-0/+3
* scripts/om-fwupgradecfg-gen.sh: add support for the MR900John Crispin2014-11-141-2/+2
* scripts/om-fwupgradecfg-gen.sh: add support for the OM5PJohn Crispin2014-07-201-2/+2
* scripts/om-fwupgradecfg-gen.sh: add support for the MR600Gabor Juhos2012-11-181-9/+27
* scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.shGabor Juhos2012-11-141-0/+52
7' href='#n167'>167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471
/*
 * This file is part of the flashrom project.
 *
 * Copyright (C) 2018 Lubomir Rintel <lkundrak@v3.sk>
 *
 * Based on ft2232_spi.c:
 *
 * Copyright (C) 2011 asbokid <ballymunboy@gmail.com>
 * Copyright (C) 2014 Pluto Yang <yangyj.ee@gmail.com>
 * Copyright (C) 2015-2016 Stefan Tauner
 * Copyright (C) 2015 Urja Rannikko <urjaman@gmail.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */

/*
 * The reverse-engineered protocol description was obtained from the
 * iceBurn project <https://github.com/davidcarne/iceBurn> by
 * David Carne <davidcarne@gmail.com>.
 */

#include <stdlib.h>
#include <string.h>
#include <libusb.h>
#include "programmer.h"

/* This is pretty much arbitrarily chosen. After one second without a
 * response we can be pretty sure we're not going to succeed. */
#define USB_TIMEOUT		1000

#define	CMD_WRITE_EP		0x01
#define	CMD_READ_EP		0x82
#define	DATA_WRITE_EP		0x03
#define	DATA_READ_EP		0x84

struct digilent_spi_data {
	struct libusb_device_handle *handle;
	bool reset_board;
};

#define DIGILENT_VID		0x1443
#define DIGILENT_JTAG_PID	0x0007

static const struct dev_entry devs_digilent_spi[] = {
	{ DIGILENT_VID, DIGILENT_JTAG_PID, OK, "Digilent", "Development board JTAG" },
	{ 0 },
};

/* Control endpoint commands. */
enum {
	GET_BOARD_TYPE		= 0xe2,
	GET_BOARD_SERIAL	= 0xe4,
};

/* Command bulk endpoint command groups. */
enum {
	CMD_GPIO		= 0x03,
	CMD_BOARD		= 0x04,
	CMD_SPI			= 0x06,
};

/* GPIO subcommands. */
enum {
	CMD_GPIO_OPEN		= 0x00,
	CMD_GPIO_CLOSE		= 0x01,
	CMD_GPIO_SET_DIR	= 0x04,
	CMD_GPIO_SET_VAL	= 0x06,
};

/* Board subcommands. */
enum {
	CMD_BOARD_OPEN		= 0x00,
	CMD_BOARD_CLOSE		= 0x01,
	CMD_BOARD_SET_REG	= 0x04,
	CMD_BOARD_GET_REG	= 0x05,
	CMD_BOARD_PL_STAT	= 0x85,
};

/* SPI subcommands. */
enum {
	CMD_SPI_OPEN		= 0x00,
	CMD_SPI_CLOSE		= 0x01,
	CMD_SPI_SET_SPEED	= 0x03,
	CMD_SPI_SET_MODE	= 0x05,
	CMD_SPI_SET_CS		= 0x06,
	CMD_SPI_START_IO	= 0x07,
	CMD_SPI_TX_END		= 0x87,
};

static int do_command(uint8_t *req, int req_len, uint8_t *res, int res_len, struct libusb_device_handle *handle)
{
	int tx_len = 0;
	int ret;

	req[0] = req_len - 1;
	ret = libusb_bulk_transfer(handle, CMD_WRITE_EP, req, req_len, &tx_len, USB_TIMEOUT);
	if (ret) {
		msg_perr("Failed to issue a command: '%s'\n", libusb_error_name(ret));
		return -1;
	}

	if (tx_len != req_len) {
		msg_perr("Short write issuing a command\n");
		return -1;
	}

	ret = libusb_bulk_transfer(handle, CMD_READ_EP, res, res_len, &tx_len, USB_TIMEOUT);
	if (ret) {
		msg_perr("Failed to get a response: '%s'\n", libusb_error_name(ret));
		return -1;
	}

	if (tx_len != res_len) {
		msg_perr("Short read getting a response\n");
		return -1;
	}

	if (res[0] != res_len -1) {
		msg_perr("Response indicates incorrect length.\n");
		return -1;
	}

	return 0;
}

static int gpio_open(struct libusb_device_handle *handle)
{
	uint8_t req[] = { 0x00, CMD_GPIO, CMD_GPIO_OPEN, 0x00 };
	uint8_t res[2];

	return do_command(req, sizeof(req), res, sizeof(res), handle);
}

static int gpio_set_dir(uint8_t direction, struct libusb_device_handle *handle)
{
	uint8_t req[] = { 0x00, CMD_GPIO, CMD_GPIO_SET_DIR, 0x00,
			  direction, 0x00, 0x00, 0x00 };
	uint8_t res[6];

	return do_command(req, sizeof(req), res, sizeof(res), handle);
}

static int gpio_set_value(uint8_t value, struct libusb_device_handle *handle)
{
	uint8_t req[] = { 0x00, CMD_GPIO, CMD_GPIO_SET_VAL, 0x00,
			  value, 0x00, 0x00, 0x00 };
	uint8_t res[2];

	return do_command(req, sizeof(req), res, sizeof(res), handle);
}

static int spi_open(struct libusb_device_handle *handle)
{
	uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_OPEN, 0x00 };
	uint8_t res[2];

	return do_command(req, sizeof(req), res, sizeof(res), handle);
}

static int spi_set_speed(uint32_t speed, struct libusb_device_handle *handle)
{
	uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_SET_SPEED, 0x00,
			  (speed) & 0xff,
			  (speed >> 8) & 0xff,
			  (speed >> 16) & 0xff,
			  (speed >> 24) & 0xff };
	uint8_t res[6];
	uint32_t real_speed;
	int ret;

	ret = do_command(req, sizeof(req), res, sizeof(res), handle);
	if (ret)
		return ret;

	real_speed = (res[5] << 24) | (res[4] << 16) | (res[3] << 8) | res[2];
	if (real_speed != speed)
		msg_pwarn("SPI speed set to %d instead of %d\n", real_speed, speed);

	return 0;
}

static int spi_set_mode(uint8_t mode, struct libusb_device_handle *handle)
{
	uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_SET_MODE, 0x00, mode };
	uint8_t res[2];

	return do_command(req, sizeof(req), res, sizeof(res), handle);
}

static int spi_set_cs(uint8_t cs, struct libusb_device_handle *handle)
{
	uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_SET_CS, 0x00, cs };
	uint8_t res[2];

	return do_command(req, sizeof(req), res, sizeof(res), handle);
}

static int spi_start_io(uint8_t read_follows, uint32_t write_len, struct libusb_device_handle *handle)
{
	uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_START_IO, 0x00,
			  0x00, 0x00, /* meaning unknown */
			  read_follows,
			  (write_len) & 0xff,
			  (write_len >> 8) & 0xff,
			  (write_len >> 16) & 0xff,
			  (write_len >> 24) & 0xff };
	uint8_t res[2];

	return do_command(req, sizeof(req), res, sizeof(res), handle);
}

static int spi_tx_end(uint8_t read_follows, uint32_t tx_len, struct libusb_device_handle *handle)
{
	uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_TX_END, 0x00 };
	uint8_t res[read_follows ? 10 : 6];
	int ret;
	uint32_t count;

	ret = do_command(req, sizeof(req), res, sizeof(res), handle);
	if (ret != 0)
		return ret;

	if ((res[1] & 0x80) == 0) {
		msg_perr("%s: response missing a write count\n", __func__);
		return -1;
	}

	count = res[2] | (res[3] << 8) | (res[4] << 16) | res[5] << 24;
	if (count != tx_len) {
		msg_perr("%s: wrote only %d bytes instead of %d\n", __func__, count, tx_len);
		return -1;
	}

	if (read_follows) {
		if ((res[1] & 0x40) == 0) {
			msg_perr("%s: response missing a read count\n", __func__);
			return -1;
		}

		count = res[6] | (res[7] << 8) | (res[8] << 16) | res[9] << 24;
		if (count != tx_len) {
			msg_perr("%s: read only %d bytes instead of %d\n", __func__, count, tx_len);
			return -1;
		}
	}

	return 0;
}

static int digilent_spi_send_command(const struct flashctx *flash, unsigned int writecnt, unsigned int readcnt,
				     const unsigned char *writearr, unsigned char *readarr)
{
	int ret;
	int len = writecnt + readcnt;
	int tx_len = 0;
	uint8_t buf[len];
	uint8_t read_follows = readcnt > 0 ? 1 : 0;
	struct digilent_spi_data *digilent_data = flash->mst->spi.data;

	memcpy(buf, writearr, writecnt);
	memset(buf + writecnt, 0xff, readcnt);

	ret = spi_set_cs(0, digilent_data->handle);
	if (ret != 0)
		return ret;

	ret = spi_start_io(read_follows, writecnt, digilent_data->handle);
	if (ret != 0)
		return ret;

	ret = libusb_bulk_transfer(digilent_data->handle, DATA_WRITE_EP, buf, len, &tx_len, USB_TIMEOUT);
	if (ret != 0) {
		msg_perr("%s: failed to write data: '%s'\n", __func__, libusb_error_name(ret));
		return -1;
	}
	if (tx_len != len) {
		msg_perr("%s: short write\n", __func__);
		return -1;
	}

	if (read_follows) {
		ret = libusb_bulk_transfer(digilent_data->handle, DATA_READ_EP, buf, len, &tx_len, USB_TIMEOUT);
		if (ret != 0) {
			msg_perr("%s: failed to read data: '%s'\n", __func__, libusb_error_name(ret));
			return -1;
		}
		if (tx_len != len) {
			msg_perr("%s: short read\n", __func__);
			return -1;
		}
	}

	ret = spi_tx_end(read_follows, len, digilent_data->handle);
	if (ret != 0)
		return ret;

	ret = spi_set_cs(1, digilent_data->handle);
	if (ret != 0)
		return ret;

	memcpy(readarr, &buf[writecnt], readcnt);

	return 0;
}

static int digilent_spi_shutdown(void *data)
{
	struct digilent_spi_data *digilent_data = data;

	if (digilent_data->reset_board)
		gpio_set_dir(0, digilent_data->handle);

	libusb_close(digilent_data->handle);

	free(data);
	return 0;
}

static const struct spi_master spi_master_digilent_spi = {
	.features	= SPI_MASTER_4BA,
	.max_data_read	= 252,
	.max_data_write	= 252,
	.command	= digilent_spi_send_command,
	.multicommand	= default_spi_send_multicommand,
	.read		= default_spi_read,
	.write_256	= default_spi_write_256,
	.write_aai	= default_spi_write_aai,
	.shutdown	= digilent_spi_shutdown,
	.probe_opcode	= default_spi_probe_opcode,
};

static bool default_reset(struct libusb_device_handle *handle)
{
	char board[17];

	libusb_control_transfer(handle, LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR,
	                        GET_BOARD_TYPE, 0, 0,
	                        (unsigned char *)board, sizeof(board) - 1, USB_TIMEOUT);
	board[sizeof(board) -1] = '\0';

	if (strcmp(board, "iCE40") == 0)
		return true;

	msg_pwarn("%s: unknown board '%s' not attempting a reset. "
	          "Override with '-p digilent_spi=reset=1'.\n", __func__, board);
	return false;
}

struct digilent_spispeeds {
        const char *const name;
        const int speed;
};

static const struct digilent_spispeeds spispeeds[] = {
	{ "4M",		4000000 },
	{ "2M",		2000000 },
	{ "1M",		1000000 },
	{ "500k",	500000 },
	{ "250k",	250000 },
	{ "125k",	125000 },
	{ "62.5k",	62500 },
	{ NULL,		0 },
};

static int digilent_spi_init(const struct programmer_cfg *cfg)
{
	char *param_str;
	uint32_t speed_hz = spispeeds[0].speed;
	int i;
	struct libusb_device_handle *handle = NULL;
	bool reset_board;

	int32_t ret = libusb_init(NULL);
	if (ret < 0) {
		msg_perr("%s: couldn't initialize libusb!\n", __func__);
		return -1;
	}

#if LIBUSB_API_VERSION < 0x01000106
	libusb_set_debug(NULL, 3);
#else
	libusb_set_option(NULL, LIBUSB_OPTION_LOG_LEVEL, LIBUSB_LOG_LEVEL_INFO);
#endif

	uint16_t vid = devs_digilent_spi[0].vendor_id;
	uint16_t pid = devs_digilent_spi[0].device_id;
	handle = libusb_open_device_with_vid_pid(NULL, vid, pid);
	if (handle == NULL) {
		msg_perr("%s: couldn't open device %04x:%04x.\n", __func__, vid, pid);
		return -1;
	}

	ret = libusb_claim_interface(handle, 0);
	if (ret != 0) {
		msg_perr("%s: failed to claim interface 0: '%s'\n", __func__, libusb_error_name(ret));
		goto close_handle;
	}

	param_str = extract_programmer_param_str(cfg, "spispeed");
	if (param_str) {
		for (i = 0; spispeeds[i].name; ++i) {
			if (!strcasecmp(spispeeds[i].name, param_str)) {
				speed_hz = spispeeds[i].speed;
				break;
			}
		}
		if (!spispeeds[i].name) {
			msg_perr("Error: Invalid spispeed value: '%s'.\n", param_str);
			free(param_str);
			goto close_handle;
		}
		free(param_str);
	}

	param_str = extract_programmer_param_str(cfg, "reset");
	if (param_str && strlen(param_str))
		reset_board = (param_str[0] == '1');
	else
		reset_board = default_reset(handle);
	free(param_str);


	if (reset_board) {
		if (gpio_open(handle) != 0)
			goto close_handle;
		if (gpio_set_dir(1, handle) != 0)
			goto close_handle;
		if (gpio_set_value(0, handle) != 0)
			goto close_handle;
	}

	if (spi_open(handle) != 0)
		goto close_handle;
	if (spi_set_speed(speed_hz, handle) != 0)
		goto close_handle;
	if (spi_set_mode(0x00, handle) != 0)
		goto close_handle;

	struct digilent_spi_data *digilent_data = calloc(1, sizeof(*digilent_data));
	if (!digilent_data) {
		msg_perr("Unable to allocate space for SPI master data\n");
		goto close_handle;
	}
	digilent_data->reset_board = reset_board;
	digilent_data->handle = handle;

	return register_spi_master(&spi_master_digilent_spi, digilent_data);

close_handle:
	libusb_close(handle);
	return -1;
}

const struct programmer_entry programmer_digilent_spi = {
	.name			= "digilent_spi",
	.type			= USB,
	.devs.dev		= devs_digilent_spi,
	.init			= digilent_spi_init,
};