aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: Update to version 5.15.81Hauke Mehrtens2022-12-0328-351/+48
| | | | | | | The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 077622a198039f9f3d907b5cf4d77a52d7592c49)
* base-files: support "metric" in board.jsonRafał Miłecki2022-12-011-1/+2
| | | | | | | | It allows prepopulating /etc/config/network interface-s with predefined metric. It may be useful for devices with multiple WAN ports. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 7f443d2d9aa1170d6b68f0dc6d5b5552882ee327)
* mt76: move the mt7921 firmware to its own packageAndre Heider2022-11-291-3/+9
| | | | | | | | | | It's not just required for the PCI version, but for USB and presumably SDIO as well. Tested with 0e8d:7961 Comfast CF-953AX (MT7921AU). Signed-off-by: Andre Heider <a.heider@gmail.com> (cherry picked from commit 6f729163b18fb5860f1aa5a5a0c8861a8e3f53ad)
* kernel: add kmod-hwmon-sht3x supportUwe Kleine-König2022-11-271-0/+15
| | | | | | | | The driver supports the temperature and humidity sensors chips SHT3x and STS3x by Sensirion. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> (cherry picked from commit cec9cbef449daea6529fbda64777ff1b7ae4e499)
* procd: service: pass all arguments to serviceAndrew Ammerlaan2022-11-271-3/+3
| | | | | | | | | | Passing all arguments to /etc/init.d/$service restores the behaviour of openwrt 21.02. This is relevant for services such as etherwake which take more then one argument, e.g.: "service etherwake start <list of devices to wake>" Signed-off-by: Andrew Ammerlaan <andrewammerlaan@gentoo.org> (cherry picked from commit b2e83c16e1383eb817c1f34d7118b01cefa670d8)
* wolfssl: update to v5.5.3Nick Hainke2022-11-273-53/+3
| | | | | | | | | | | | | | | Remove "200-ecc-rng.patch" because it was upstramed by: https://github.com/wolfSSL/wolfssl/commit/e2566bab2122949a6a0bb2276d0a52598794d7d0 Refreshed "100-disable-hardening-check.patch". Fixes CVE 2022-42905. Release Notes: - https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.2-stable - https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.3-stable Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 745f1ca9767716c43864a2b7a43ed60b16c25560)
* mbedtls: import patch to fix illegal instruction on mpc85xxNick Hainke2022-11-271-0/+30
| | | | | | Import patch as workaround for gcc-11.2.0. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mt76: add firmware package for mt7916Andrew Powers-Holmes2022-11-271-0/+16
| | | | | | | | | | | Add kernel package 'mt7916-firmware' with firmware files for MT7916E devices. These share the same driver as the MT7915 chipset, but use their own firmware. Tested using a pair of AsiaRF AW7916-NPD cards. Signed-off-by: Andrew Powers-Holmes <aholmes@omnom.net> (cherry picked from commit 94d0cb9d2ec23fb15acd1fc17a351983f8771d13)
* kernel: modules: package Marvell gigE PHY driverDaniel Golle2022-11-261-0/+34
| | | | | | | | | | | | | | | | | | | | Some copper SFP modules come with Marvell's 88E1xxx PHY and need this module to function. Package it, so users can easily install this PHY driver and use e.g. FINISAR CORP. FCLF-8521-3-HC SFP. Without marvell PHY driver: sfp sfp2: module FINISAR CORP. FCLF-8521-3-HC rev A sn XXXXXXX dc XXXXXX mt7530 mdio-bus:1f sfp2: validation with support 0000000,00000000,00000000 failed: -22 sfp sfp2: sfp_add_phy failed: -22 With marvell PHY driver: sfp sfp2: module FINISAR CORP. FCLF-8521-3-HC rev A sn XXXXXXX dc XXXXXX mt7530 mdio-bus:1f sfp2: switched to inband/sgmii link mode mt7530 mdio-bus:1f sfp2: PHY [i2c:sfp2:16] driver [Marvell 88E1111] (irq=POLL) mt7530 mdio-bus:1f sfp2: Link is Up - 1Gbps/Full - flow control rx/tx Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit ebe2b7190b7d8815a588eaf8a5cfdf9edfd85c36)
* kernel: improve description of NTFS kernel packagesRafał Miłecki2022-11-211-2/+3
| | | | | | | This helps choosing the right NTFS driver from two available options. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit b066ad7d9aa5221bfd334a3017abe9bcd171b33f)
* ath79: add support for Linksys EA4500 v3Edward Chow2022-11-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Linksys EA4500 v3 wireless router Hardware -------- SoC: Qualcomm Atheros QCA9558 RAM: 128M DDR2 (Winbond W971GG6KB-25) FLASH: 128M SPI-NAND (Spansion S34ML01G100TFI00) WLAN: QCA9558 3T3R 802.11 bgn QCA9580 3T3R 802.11 an ETH: Qualcomm Atheros QCA8337 UART: 115200 8n1, same as ea4500 v2 USB: 1 single USB 2.0 host port BUTTON: Reset - WPS LED: 1x system-LED LEDs besides the ethernet ports are controlled by the ethernet switch MAC Address: use address(sample 1) source label 94:10:3e:xx:xx:6f caldata@cal_macaddr lan 94:10:3e:xx:xx:6f $label wan 94:10:3e:xx:xx:6f $label WiFi4_2G 94:10:3e:xx:xx:70 caldata@cal_ath9k_soc WiFi4_5G 94:10:3e:xx:xx:71 caldata@cal_ath9k_pci Installation from Serial Console ------------ 1. Connect to the serial console. Power up the device and interrupt autoboot when prompted 2. Connect a TFTP server reachable at 192.168.1.0/24 (e.g. 192.168.1.66) to the ethernet port. Serve the OpenWrt initramfs image as "openwrt.bin" 3. To test OpenWrt only, go to step 4 and never execute step 5; To install, auto_recovery should be disabled first, and boot_part should be set to 1 if its current value is not. ath> setenv auto_recovery no ath> setenv boot_part 1 ath> saveenv 4. Boot the initramfs image using U-Boot ath> setenv serverip 192.168.1.66 ath> tftpboot 0x84000000 openwrt.bin ath> bootm 5. Copy the OpenWrt sysupgrade image to the device using scp and install it like a normal upgrade (with no need to keeping config since no config from "previous OpenWRT installation" could be kept at all) # sysupgrade -n /path/to/openwrt/sysupgrade.bin Note: Like many other routers produced by Linksys, it has a dual firmware flash layout, but because I do not know how to handle it, I decide to disable it for more usable space. (That is why the "auto_recovery" above should be disabled before installing OpenWRT.) If someone is interested in generating factory firmware image capable to flash from stock firmware, as well as restoring the dual firmware layout, commented-out layout for the original secondary partitions left in the device tree may be a useful hint. Installation from Web Interface ------------ 1. Login to the router via its web interface (default password: admin) 2. Find the firmware update interface under "Connectivity/Basic" 3. Choose the OpenWrt factory image and click "Start" 4. If the router still boots into the stock firmware, it means that the OpenWrt factory image has been installed to the secondary partitions and failed to boot (since OpenWrt on EA4500 v3 does not support dual boot yet), and the router switched back to the stock firmware on the primary partitions. You have to install a stock firmware (e.g. 3.1.6.172023, downloadable from https://www.linksys.com/support-article?articleNum=148385 ) first (to the secondary partitions) , and after that, install OpenWrt factory image (to the primary partitions). After successful installation of OpenWrt, auto_recovery will be automatically disabled and router will only boot from the primary partitions. Signed-off-by: Edward Chow <equu@openmail.cc> (cherry picked from commit 50f727b7737d118f7d44986181e305af0624c41d)
* mac80211: fix mesh airtime link metric estimationFelix Fietkau2022-11-101-0/+36
| | | | | | | fix reading the per-packet rate on devices with firmware rate control Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 161b22d103decd82868e8e3c3fe09b88cf64724c)
* mac80211: fix issues with receiving small STP packetsFelix Fietkau2022-11-102-0/+124
| | | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit cec7dfa49775ce65270b977bea5fc0f928f97bdc) (cherry-picked from commit f6c359a65528b994e97235b5f0b0d02d6cdad918)
* mac80211: fix decap offload for stations on AP_VLAN interfacesFelix Fietkau2022-11-101-0/+37
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit eb07020de2b4a5f89579f09f5060d4b9f070a356)
* hostapd: remove invalid dtim_period option processingFelix Fietkau2022-11-101-2/+1
| | | | | | | | | dtim_period is a bss property, not a device one. It is already handled properly in mac80211.sh Fixes: 30c64825c7ed ("hostapd: add dtim_period, local_pwr_constraint, spectrum_mgmt_required") Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit ddf736e543d4a214f563dc008b6fb5ee5e0d1b66)
* strace: replace PKG_CPE_IDNick Hainke2022-11-071-1/+1
| | | | | | | | | | | Searching for strace in nvd.nist.gov/products/cpe/search [0] will result in "cpe:/a:strace_project:strace". Replace the current PKG_CPE_ID with it. [0] - https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.2&keyword=strace Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 55c015ae4d115cf8ffb61ee2778d8355c224bd46)
* strace: update to 5.19Nick Hainke2022-11-071-3/+3
| | | | | | | | Release Notes: https://strace.io/files/5.19/ Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 781a2e20085fff44fade871b0801468e4800af1a)
* strace: add nls.mkRosen Penev2022-11-071-1/+2
| | | | | | | | Needed when building with libdw and CONFIG_BUILD_NLS, mostly for the rpath-link. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit 4dc198a74e63c18733be4c6962e19e68f094e688)
* strace: update to 5.18Nick Hainke2022-11-071-2/+2
| | | | | | | | | | | | | | | | Improvements - Added an interface of raising des Strausses awareness. - Added --tips option to print strace tips, tricks, and tweaks at the end of the tracing session. - Enhanced decoding of bpf and io_uring_register syscalls. - Implemented decoding of COUNTER_*, RTC_PARAM_GET, and RTC_PARAM_SET ioctl commands. - Updated lists of BPF_*, BR_*, BTRFS_*, IFA_*, IFLA_*, IORING_*, KEY_*, KVM_*, MADV_*, and UFFD_* constants. - Updated lists of ioctl commands from Linux 5.18. Bug fixes - Fixed printing of the updated value of union bpf_attr.next_id on the exiting of bpf(BPF_*_GET_NEXT_ID) calls. Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 6d423ffbd17f5b00432f8f7a9fc7ea18d437d902)
* strace: update to 5.17Nick Hainke2022-11-071-2/+2
| | | | | | | | | | | | | | | | | Improvements - Added 64-bit LoongArch architecture support. - Extended personality designation syntax of syscall specification expressions to support all@pers and %class@pers. - Enhanced rejection of invalid syscall numbers in syscall specification expressions. - Implemented decoding of set_mempolicy_home_node syscall, introduced in Linux 5.17. - Implemented decoding of IFLA_GRO_MAX_SIZE and TCA_ACT_IN_HW_COUNT netlink attributes. - Implemented decoding of PR_SET_VMA operation of prctl syscall. - Implemented decoding of siginfo_t.si_pkey field. - Implemented decoding of LIRC ioctl commands. - Updated lists of FAN_*, IORING_*, IOSQE_*, KEY_*, KVM_*, MODULE_INIT_*, TCA_ACT_*, and *_MAGIC constants. - Updated lists of ioctl commands from Linux 5.17. Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 36f3238dcb119f9e6b79e01d8f97776f67a7bfce)
* kernel: netsupport: Add FQ-PIE as an optional sched kmod and extract PIEKabuli Chana2022-11-051-2/+33
| | | | | | | | | add Flow Queuing with Proportional Integral controller Enhanced (FQ-PIE) as an optional kmod in network support and extract sched-pie from kmod-sched to allow dependency on just kmod-sched-pie (PIE). Signed-off-by: Kabuli Chana <newtownBuild@gmail.com> (cherry picked from commit c3e4a0d99b972b91dd65f535365b9b71fcb541ae)
* kernel: extract kmod-sched-act-ipt from kmod-schedStijn Tintel2022-11-051-3/+18
| | | | | | | | | | | There is only one module in kmod-sched that depends on iptables. Move it to its own kmod package so we can drop the kmod-ipt-core dependency from kmod-sched. This makes it possible to disable all kmod-ipt-* packages without having to disable kmod-sched. Since we now default to firewall4 and nftables, we should avoid iptables dependencies where we can. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 05775e38a52007397e5460bd87fa1ac957feb2af)
* kernel: netsupport: Extract act_policeHauke Mehrtens2022-11-051-2/+13
| | | | | | | | This extracts kmod-sched-act-police to allow using it without adding all the packages from the big kmod-sched package. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com> (cherry picked from commit 0582acf42967e47c16eb3193f91ca65b01b57e8e)
* kernel: netsupport: Add kmod-sched-act-sampleThomas Langer2022-11-051-0/+20
| | | | | | | | | This adds the act_sample.ko and psample.ko kernel module which allows traffic sampling. Signed-off-by: Thomas Langer <tlanger@maxlinear.com> Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com> (cherry picked from commit aba1bdaed8cb612d4a4d9e8bba2dc963d6ceca76)
* kernel: netsupport: Extract sched-prio and sched-redThomas Langer2022-11-051-3/+33
| | | | | | | | | | Extract the kmod-sched-prio and kmod-sched-red kernel modules from the big kmod-sched package. This allows adding the two kernel modules to OpenWrt without adding the kmod-sched and all its depdnecy. Signed-off-by: Thomas Langer <tlanger@maxlinear.com> Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com> (cherry picked from commit 0e3911b6084ac596a3da6b1a255776e44331beef)
* kernel: netsupport: Add kmod-sched-drrHauke Mehrtens2022-11-051-0/+16
| | | | | | | This adds a package with the DRR scheduler. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com> (cherry picked from commit fa85e44d3c4437327a0ad592831f1746b8b2dc3a)
* kernel: netsupport: kmod-sched: Reorder packagesHauke Mehrtens2022-11-051-49/+53
| | | | | | | | | This puts the kmod-sched packages into an alphabetical order. I kept the kmod-sched-core at the top as this is the main package. No changes other than reordering were done. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com> (cherry picked from commit c94ba95e6cd41ccf8f15e77ebe7b7d65e5fd4396)
* ipq40xx: Add ZTE MF289FGiammarco Marzano2022-11-053-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's a 4G Cat.20 router used by Vodafone Italy (called Vodafone FWA) and Vodafone DE\T-Mobile PL (called GigaCube). Modem is a MiniPCIe-to-USB based on Snapdragon X24, it supports 4CA aggregation. There are currently two hardware revisions, which differ on the 5Ghz radio: AT1 = QCA9984 5Ghz Radio on PCI-E bus AT2 = IPQ4019 5Ghz Radio inside IPQ4019 like 2.4Ghz Device specification -------------------- SoC Type: Qualcomm IPQ4019 RAM: 256 MiB Flash: 128 MiB SPI NAND (Winbond W25N01GV) ROM: 2MiB SPI Flash (GD25Q16) Wireless 2.4 GHz (IP4019): b/g/n, 2x2 Wireless 5 GHz: (QCA9984): a/n/ac, 4x4 HW REV AT1 (IPA4019): a/n/ac, 2x2 HW REV AT2 Ethernet: 2xGbE (WAN/LAN1, LAN2) USB ports: No Button: 2 (Reset/WPS) LEDs: 3 external leds: Network (white or red), Wifi, Power and 1 internal (blue) Power: 12 VDC, 1 A Connector type: Barrel Bootloader: U-Boot Installation ------------ 1. Place OpenWrt initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial connector GND (which is right next to the thing with MF289F MIMO-V1.0), RX, TX (refer to this image: https://ibb.co/31Gngpr). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. Stop in u-Boot (using ESC button) and run u-Boot commands: setenv serverip 192.168.0.2 setenv ipaddr 192.168.0.1 set fdt_high 0x85000000 tftp openwrt-ipq40xx-generic-zte_mf289f-initramfs-fit-zImage.itb bootm $loadaddr 5. Please make backup of original partitions, if you think about revert to stock, specially mtd16 (Web UI) and mtd17 (rootFS). Use /tmp as temporary storage and do: WEB PARITION -------------------------------------- cat /dev/mtd16 > /tmp/mtd16.bin scp /tmp/mtd16.bin root@YOURSERVERIP:/ rm /tmp/mtd16.bin ROOT PARITION -------------------------------------- cat /dev/mtd17 > /tmp/mtd17.bin scp /tmp/mtd17.bin root@YOURSERVERIP:/ rm /tmp/mtd17.bin 6. Login via ssh or serial and remove stock partitions (default IP 192.168.0.1): # this can return an error, if ubi was attached before # or rootfs part was erased before. ubiattach -m 17 # it could return error if rootfs part was erased before ubirmvol /dev/ubi0 -N ubi_rootfs # some devices doesn't have it ubirmvol /dev/ubi0 -N ubi_rootfs_data 7. download and install image via sysupgrade -n (either use wget/scp to copy the mf289f's squashfs-sysupgrade.bin to the device's /tmp directory) sysupgrade -n /tmp/openwrt-...-zte_mf289f-squashfs-sysupgrade.bin Sometimes it could print ubi attach error, but please ignore it if process goes forward. Flash Layout NAND: mtd8: 000a0000 00020000 "fota-flag" mtd9: 00080000 00020000 "0:ART" mtd10: 00080000 00020000 "mac" mtd11: 000c0000 00020000 "reserved2" mtd12: 00400000 00020000 "cfg-param" mtd13: 00400000 00020000 "log" mtd14: 000a0000 00020000 "oops" mtd15: 00500000 00020000 "reserved3" mtd16: 00800000 00020000 "web" mtd17: 01d00000 00020000 "rootfs" mtd18: 01900000 00020000 "data" mtd19: 03200000 00020000 "fota" mtd20: 0041e000 0001f000 "kernel" mtd21: 0101b000 0001f000 "ubi_rootfs" SPI: mtd0: 00040000 00010000 "0:SBL1" mtd1: 00020000 00010000 "0:MIBIB" mtd2: 00060000 00010000 "0:QSEE" mtd3: 00010000 00010000 "0:CDT" mtd4: 00010000 00010000 "0:DDRPARAMS" mtd5: 00010000 00010000 "0:APPSBLENV" mtd6: 000c0000 00010000 "0:APPSBL" mtd7: 00050000 00010000 "0:reserved1" Back to Stock (!!! need original dump taken from initramfs !!!) ------------- 1. Place mtd16.bin and mtd17.bin initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial console connector (refer to the pin-out from above). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. rename mtd16.bin to web.img and mtd17.bin to root_uImage_s 5. Stop in u-Boot (using ESC button) and run u-Boot commands: This will erase RootFS+Web: nand erase 0x1000000 0x800000 nand erase 0x1800000 0x1D00000 This will restore RootFS: tftpboot 0x84000000 ${dir}root_uImage_s nand erase 0x1800000 0x1D00000 nand write $fileaddr 0x1800000 $filesize This will restore Web Interface: tftpboot 0x84000000 ${dir}web.img nand erase 0x1000000 0x800000 nand write $fileaddr 0x1000000 $filesize After first boot on stock firwmare, do a factory reset. Push reset button for 5 seconds so all parameters will be reverted to the one printed on label on bottom of the router Signed-off-by: Giammarco Marzano <stich86@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@gmail.com> (Warning: commit message did not conform to UTF-8 - hopefully fixed?, added description of the pin-out if image goes down, reformatted commit message to be hopefully somewhat readable on git-web, redid some of the gpio-buttons & leds DT nodes, etc.) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 0de6a3339f1aadc1de2c9371435e3de239a00645) [Backported to 22.03: added DTS to the makefile patch, fixed ipq-wifi inclusion for MF286D] Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* uboot-envtools: Fix format of autogenerated sectorsSven Eckelmann2022-11-052-0/+2
| | | | | | | | | | | | | | The sector number must be stored in hex. Otherwise, the number (like 16) will be parsed as hex and any write to the partition will end up with an error like: MTD erase error on /dev/mtd5: Invalid argument Fixes: 9adfeccd8415 ("uboot-envtools: Add support for IPQ806x AP148 and DB149") Fixes: 54b275c8ed3a ("ipq40xx: add target") Signed-off-by: Sven Eckelmann <sven@narfation.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@fungible.com> (cherry picked from commit 8d3e932b65b59ab7231cb5440866eb975bd150ea)
* openssl: bump to 1.1.1sJohn Audia2022-11-0514-168/+2527
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes between 1.1.1r and 1.1.1s [1 Nov 2022] *) Fixed a regression introduced in 1.1.1r version not refreshing the certificate data to be signed before signing the certificate. [Gibeom Gwon] Changes between 1.1.1q and 1.1.1r [11 Oct 2022] *) Fixed the linux-mips64 Configure target which was missing the SIXTY_FOUR_BIT bn_ops flag. This was causing heap corruption on that platform. [Adam Joseph] *) Fixed a strict aliasing problem in bn_nist. Clang-14 optimisation was causing incorrect results in some cases as a result. [Paul Dale] *) Fixed SSL_pending() and SSL_has_pending() with DTLS which were failing to report correct results in some cases [Matt Caswell] *) Fixed a regression introduced in 1.1.1o for re-signing certificates with different key sizes [Todd Short] *) Added the loongarch64 target [Shi Pujin] *) Fixed a DRBG seed propagation thread safety issue [Bernd Edlinger] *) Fixed a memory leak in tls13_generate_secret [Bernd Edlinger] *) Fixed reported performance degradation on aarch64. Restored the implementation prior to commit 2621751 ("aes/asm/aesv8-armx.pl: avoid 32-bit lane assignment in CTR mode") for 64bit targets only, since it is reportedly 2-17% slower and the silicon errata only affects 32bit targets. The new algorithm is still used for 32 bit targets. [Bernd Edlinger] *) Added a missing header for memcmp that caused compilation failure on some platforms [Gregor Jasny] Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit a0814f04ed955eb10b25df0ce6666ed91f11ca1b)
* uboot-layerscape: adjust LS1012A-IOT config and envPawel Dembicki2022-11-052-1/+46
| | | | | | | | | | | | | | | | In a254279a6c30 LS1012A-IOT kernel image was switched to FIT. But u-boot config is lack of FIT and ext4 support. This patch enables it. It also fix envs, because for some reason this board need to use "loadaddr" variable in brackets. Fixes: #9894 Fixes: a254279a6c30 ("layerscape: Change to combined rootfs on sd images") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (cherry picked from commit d75ed3726d994fd050730e9ab5923d6232913054)
* dnsmasq: Backport DHCPv6 server fix (CVE-2022-0934)Hauke Mehrtens2022-11-051-0/+179
| | | | | | | | | | | | This backports a commit from upstream dnsmasq to fix CVE-2022-0934. CVE-2022-0934 description: A single-byte, non-arbitrary write/use-after-free flaw was found in dnsmasq. This flaw allows an attacker who sends a crafted packet processed by dnsmasq, potentially causing a denial of service. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 002a99eccd75fb653163bae0a1132bd4f494e7ad)
* busybox: awk: fix use after free (CVE-2022-30065)Hauke Mehrtens2022-11-051-0/+42
| | | | | | | | | | | | This backports a commit which fixes a use after free bug in awk. CVE-2022-30065 description: A use-after-free in Busybox 1.35-x's awk applet leads to denial of service and possibly code execution when processing a crafted awk pattern in the copyvar function. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 8b383ee2a0d21144258346ad39006fc499d04b4f)
* util-linux: Update to version 2.37.4Hauke Mehrtens2022-11-051-2/+2
| | | | | | | | | This update contains only a security fix for an issue in chsh and chfn, but OpenWrt is not packaging these applications so OpenWrt is not affected. In OpenWrt master this was already fixed by the update to util-linux 2.38. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.15.74-1Hauke Mehrtens2022-10-2326-2254/+32
| | | | | | | | | This updates mac80211 to version 5.15.74-1 which is based on kernel 5.15.74. The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 58b65525f3165792a998fdb24fda11aa4097a7be)
* wireless-tools: add package CPE IDPetr Štetiar2022-10-231-0/+1
| | | | | | | | | Common Platform Enumeration (CPE) is a structured naming scheme for information technology systems, software, and packages. Suggested-by: Steffen Pfendtner <s.pfendtner@ads-tec.de> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit a80e198cd383593da7f41857a6122f28ed6354a1)
* ncurses: add package CPE IDPetr Štetiar2022-10-231-0/+1
| | | | | | | | | Common Platform Enumeration (CPE) is a structured naming scheme for information technology systems, software, and packages. Suggested-by: Steffen Pfendtner <s.pfendtner@ads-tec.de> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 3826e72b8e100f1f1df742cce6e5567b98c080e4)
* arm-trusted-firmware-sunxi: add package CPE IDPetr Štetiar2022-10-231-0/+1
| | | | | | | | | Common Platform Enumeration (CPE) is a structured naming scheme for information technology systems, software, and packages. Suggested-by: Steffen Pfendtner <s.pfendtner@ads-tec.de> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 0671e78a65d3540b1c922433f842cbb42f74950d)
* libnftnl: add package CPE IDPetr Štetiar2022-10-231-0/+1
| | | | | | | | | Common Platform Enumeration (CPE) is a structured naming scheme for information technology systems, software, and packages. Suggested-by: Steffen Pfendtner <s.pfendtner@ads-tec.de> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit efb4324c36a024ae6340d85352fb6c766a27a821)
* ath79: support Ruckus ZoneFlex 7321Lech Perczak2022-10-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ruckus ZoneFlex 7321 is a dual-band, single radio 802.11n 2x2 MIMO enterprise access point. It is very similar to its bigger brother, ZoneFlex 7372. Hardware highligts: - CPU: Atheros AR9342 SoC at 533 MHz - RAM: 64MB DDR2 - Flash: 32MB SPI-NOR - Wi-Fi: AR9342 built-in dual-band 2x2 MIMO radio - Ethernet: single Gigabit Ethernet port through AR8035 gigabit PHY - PoE: input through Gigabit port - Standalone 12V/1A power input - USB: optional single USB 2.0 host port on the 7321-U variant. Serial console: 115200-8-N-1 on internal H1 header. Pinout: H1 ---------- |1|x3|4|5| ---------- Pin 1 is near the "H1" marking. 1 - RX x - no pin 3 - VCC (3.3V) 4 - GND 5 - TX JTAG: Connector H5, unpopulated, similar to MIPS eJTAG, standard, but without the key in pin 12 and not every pin routed: ------- H5 |1 |2 | ------- |3 |4 | ------- |5 |6 | ------- |7 |8 | ------- |9 |10| ------- |11|12| ------- |13|14| ------- 3 - TDI 5 - TDO 7 - TMS 9 - TCK 2,4,6,8,10 - GND 14 - Vref 1,11,12,13 - Not connected Installation: There are two methods of installation: - Using serial console [1] - requires some disassembly, 3.3V USB-Serial adapter, TFTP server, and removing a single T10 screw, but with much less manual steps, and is generally recommended, being safer. - Using stock firmware root shell exploit, SSH and TFTP [2]. Does not work on some rare versions of stock firmware. A more involved, and requires installing `mkenvimage` from u-boot-tools package if you choose to rebuild your own environment, but can be used without disassembly or removal from installation point, if you have the credentials. If for some reason, size of your sysupgrade image exceeds 13312kB, proceed with method [1]. For official images this is not likely to happen ever. [1] Using serial console: 0. Connect serial console to H1 header. Ensure the serial converter does not back-power the board, otherwise it will fail to boot. 1. Power-on the board. Then quickly connect serial converter to PC and hit Ctrl+C in the terminal to break boot sequence. If you're lucky, you'll enter U-boot shell. Then skip to point 3. Connection parameters are 115200-8-N-1. 2. Allow the board to boot. Press the reset button, so the board reboots into U-boot again and go back to point 1. 3. Set the "bootcmd" variable to disable the dual-boot feature of the system and ensure that uImage is loaded. This is critical step, and needs to be done only on initial installation. > setenv bootcmd "bootm 0x9f040000" > saveenv 4. Boot the OpenWrt initramfs using TFTP. Replace IP addresses as needed: > setenv serverip 192.168.1.2 > setenv ipaddr 192.168.1.1 > tftpboot 0x81000000 openwrt-ath79-generic-ruckus_zf7321-initramfs-kernel.bin > bootm 0x81000000 5. Optional, but highly recommended: back up contents of "firmware" partition: $ ssh root@192.168.1.1 cat /dev/mtd1 > ruckus_zf7321_fw1_backup.bin $ ssh root@192.168.1.1 cat /dev/mtd5 > ruckus_zf7321_fw2_backup.bin 6. Copy over sysupgrade image, and perform actual installation. OpenWrt shall boot from flash afterwards: $ ssh root@192.168.1.1 # sysupgrade -n openwrt-ath79-generic-ruckus_zf7321-squashfs-sysupgrade.bin [2] Using stock root shell: 0. Reset the device to factory defaullts. Power-on the device and after it boots, hold the reset button near Ethernet connectors for 5 seconds. 1. Connect the device to the network. It will acquire address over DHCP, so either find its address using list of DHCP leases by looking for label MAC address, or try finding it by scanning for SSH port: $ nmap 10.42.0.0/24 -p22 From now on, we assume your computer has address 10.42.0.1 and the device has address 10.42.0.254. 2. Set up a TFTP server on your computer. We assume that TFTP server root is at /srv/tftp. 3. Obtain root shell. Connect to the device over SSH. The SSHD ond the frmware is pretty ancient and requires enabling HMAC-MD5. $ ssh 10.42.0.254 \ -o UserKnownHostsFile=/dev/null \ -o StrictHostKeyCheking=no \ -o MACs=hmac-md5 Login. User is "super", password is "sp-admin". Now execute a hidden command: Ruckus It is case-sensitive. Copy and paste the following string, including quotes. There will be no output on the console for that. ";/bin/sh;" Hit "enter". The AP will respond with: grrrr OK Now execute another hidden command: !v54! At "What's your chow?" prompt just hit "enter". Congratulations, you should now be dropped to Busybox shell with root permissions. 4. Optional, but highly recommended: backup the flash contents before installation. At your PC ensure the device can write the firmware over TFTP: $ sudo touch /srv/tftp/ruckus_zf7321_firmware{1,2}.bin $ sudo chmod 666 /srv/tftp/ruckus_zf7321_firmware{1,2}.bin Locate partitions for primary and secondary firmware image. NEVER blindly copy over MTD nodes, because MTD indices change depending on the currently active firmware, and all partitions are writable! # grep rcks_wlan /proc/mtd Copy over both images using TFTP, this will be useful in case you'd like to return to stock FW in future. Make sure to backup both, as OpenWrt uses bot firmwre partitions for storage! # tftp -l /dev/<rcks_wlan.main_mtd> -r ruckus_zf7321_firmware1.bin -p 10.42.0.1 # tftp -l /dev/<rcks_wlan.bkup_mtd> -r ruckus_zf7321_firmware2.bin -p 10.42.0.1 When the command finishes, copy over the dump to a safe place for storage. $ cp /srv/tftp/ruckus_zf7321_firmware{1,2}.bin ~/ 5. Ensure the system is running from the BACKUP image, i.e. from rcks_wlan.bkup partition or "image 2". Otherwise the installation WILL fail, and you will need to access mtd0 device to write image which risks overwriting the bootloader, and so is not covered here and not supported. Switching to backup firmware can be achieved by executing a few consecutive reboots of the device, or by updating the stock firmware. The system will boot from the image it was not running from previously. Stock firmware available to update was conveniently dumped in point 4 :-) 6. Prepare U-boot environment image. Install u-boot-tools package. Alternatively, if you build your own images, OpenWrt provides mkenvimage in host staging directory as well. It is recommended to extract environment from the device, and modify it, rather then relying on defaults: $ sudo touch /srv/tftp/u-boot-env.bin $ sudo chmod 666 /srv/tftp/u-boot-env.bin On the device, find the MTD partition on which environment resides. Beware, it may change depending on currently active firmware image! # grep u-boot-env /proc/mtd Now, copy over the partition # tftp -l /dev/mtd<N> -r u-boot-env.bin -p 10.42.0.1 Store the stock environment in a safe place: $ cp /srv/tftp/u-boot-env.bin ~/ Extract the values from the dump: $ strings u-boot-env.bin | tee u-boot-env.txt Now clean up the debris at the end of output, you should end up with each variable defined once. After that, set the bootcmd variable like this: bootcmd=bootm 0x9f040000 You should end up with something like this: bootcmd=bootm 0x9f040000 bootargs=console=ttyS0,115200 rootfstype=squashfs init=/sbin/init baudrate=115200 ethaddr=0x00:0xaa:0xbb:0xcc:0xdd:0xee mtdparts=mtdparts=ar7100-nor0:256k(u-boot),13312k(rcks_wlan.main),2048k(datafs),256k(u-boot-env),512k(Board Data),13312k(rcks_wlan.bkup) mtdids=nor0=ar7100-nor0 bootdelay=2 ethact=eth0 filesize=78a000 fileaddr=81000000 partition=nor0,0 mtddevnum=0 mtddevname=u-boot ipaddr=10.0.0.1 serverip=10.0.0.5 stdin=serial stdout=serial stderr=serial These are the defaults, you can use most likely just this as input to mkenvimage. Now, create environment image and copy it over to TFTP root: $ mkenvimage -s 0x40000 -b -o u-boot-env.bin u-boot-env.txt $ sudo cp u-boot-env.bin /srv/tftp This is the same image, gzipped and base64-encoded: H4sIAAAAAAAAA+3QQW7TQBQAUF8EKRtQI6XtJDS0VJoN4gYcAE3iCbWS2MF2Sss1ORDYqVq6YMEB3rP0 Z/7Yf+aP3/56827VNP16X8Zx3E/Cw8dNuAqDYlxI7bcurpu6a3Y59v3jlzCbz5eLECbt8HbT9Y+HHLvv x9TdbbpJVVd9vOxWVX05TotVOpZt6nN8qilyf5fKso3hIYTb8JDSEFarIazXQyjLIeRc7PvykNq+iy+T 1F7PQzivmzbcLpYftmfH87G56Wz+/v18sT1r19vu649dqi/2qaqns0W4utmelalPm27I/lac5/p+OluO NZ+a1JaTz8M3/9hmtT0epmMjVdnF8djXLZx+TJl36TEuTlda93EYQrGpdrmrfuZ4fZPGHzjmp/vezMNJ MV6n6qumPm06C+MRZb6vj/v4Mk/7HJ+6LarDqXweLsZnXnS5vc9tdXheWRbd0GIdh/Uq7cakOfavsty2 z1nxGwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAD+1x9eTkHLAAAEAA== 7. Perform actual installation. Copy over OpenWrt sysupgrade image to TFTP root: $ sudo cp openwrt-ath79-generic-ruckus_zf7321-squashfs-sysupgrade.bin /srv/tftp Now load both to the device over TFTP: # tftp -l /tmp/u-boot-env.bin -r u-boot-env.bin -g 10.42.0.1 # tftp -l /tmp/openwrt.bin -r openwrt-ath79-generic-ruckus_zf7321-squashfs-sysupgrade.bin -g 10.42.0.1 Vverify checksums of both images to ensure the transfer over TFTP was completed: # sha256sum /tmp/u-boot-env.bin /tmp/openwrt.bin And compare it against source images: $ sha256sum /srv/tftp/u-boot-env.bin /srv/tftp/openwrt-ath79-generic-ruckus_zf7321-squashfs-sysupgrade.bin Locate MTD partition of the primary image: # grep rcks_wlan.main /proc/mtd Now, write the images in place. Write U-boot environment last, so unit still can boot from backup image, should power failure occur during this. Replace MTD placeholders with real MTD nodes: # flashcp /tmp/openwrt.bin /dev/<rcks_wlan.main_mtd> # flashcp /tmp/u-boot-env.bin /dev/<u-boot-env_mtd> Finally, reboot the device. The device should directly boot into OpenWrt. Look for the characteristic power LED blinking pattern. # reboot -f After unit boots, it should be available at the usual 192.168.1.1/24. Return to factory firmware: 1. Boot into OpenWrt initramfs as for initial installation. To do that without disassembly, you can write an initramfs image to the device using 'sysupgrade -F' first. 2. Unset the "bootcmd" variable: fw_setenv bootcmd "" 3. Write factory images downloaded from manufacturer website into fwconcat0 and fwconcat1 MTD partitions, or restore backup you took before installation: mtd write ruckus_zf7321_fw1_backup.bin /dev/mtd1 mtd write ruckus_zf7321_fw2_backup.bin /dev/mtd5 4. Reboot the system, it should load into factory firmware again. Quirks and known issues: - Flash layout is changed from the factory, to use both firmware image partitions for storage using mtd-concat, and uImage format is used to actually boot the system, which rules out the dual-boot capability. - The 5GHz radio has its own EEPROM on board, not connected to CPU. - The stock firmware has dual-boot capability, which is not supported in OpenWrt by choice. It is controlled by data in the top 64kB of RAM which is unmapped, to avoid the interference in the boot process and accidental switch to the inactive image, although boot script presence in form of "bootcmd" variable should prevent this entirely. - U-boot disables JTAG when starting. To re-enable it, you need to execute the following command before booting: mw.l 1804006c 40 And also you need to disable the reset button in device tree if you intend to debug Linux, because reset button on GPIO0 shares the TCK pin. - On some versions of stock firmware, it is possible to obtain root shell, however not much is available in terms of debugging facitilies. 1. Login to the rkscli 2. Execute hidden command "Ruckus" 3. Copy and paste ";/bin/sh;" including quotes. This is required only once, the payload will be stored in writable filesystem. 4. Execute hidden command "!v54!". Press Enter leaving empty reply for "What's your chow?" prompt. 5. Busybox shell shall open. Source: https://alephsecurity.com/vulns/aleph-2019014 Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit f1d112ee5a43e8c4a22db05b94bbcd0677a34486)
* ath79: support Ruckus ZoneFlex 7372Lech Perczak2022-10-231-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ruckus ZoneFlex 7372 is a dual-band, dual-radio 802.11n 2x2 MIMO enterprise access point. Ruckus ZoneFlex 7352 is also supported, lacking the 5GHz radio part. Hardware highligts: - CPU: Atheros AR9344 SoC at 560 MHz - RAM: 128MB DDR2 - Flash: 32MB SPI-NOR - Wi-Fi 2.4GHz: AR9344 built-in 2x2 MIMO radio - Wi-Fi 5Ghz: AR9582 2x2 MIMO radio (Only in ZF7372) - Antennas: - Separate internal active antennas with beamforming support on both bands with 7 elements per band, each controlled by 74LV164 GPIO expanders, attached to GPIOs of each radio. - Two dual-band external RP-SMA antenna connections on "7372-E" variant. - Ethernet 1: single Gigabit Ethernet port through AR8035 gigabit PHY - Ethernet 2: single Fast Ethernet port through AR9344 built-in switch - PoE: input through Gigabit port - Standalone 12V/1A power input - USB: optional single USB 2.0 host port on "-U" variants. The same image should support: - ZoneFlex 7372E (variant with external antennas, without beamforming capability) - ZoneFlex 7352 (single-band, 2.4GHz-only variant). which are based on same baseboard (codename St. Bernard), with different populated components. Serial console: 115200-8-N-1 on internal H1 header. Pinout: H1 --- |5| --- |4| --- |3| --- |x| --- |1| --- Pin 5 is near the "H1" marking. 1 - RX x - no pin 3 - VCC (3.3V) 4 - GND 5 - TX JTAG: Connector H2, similar to MIPS eJTAG, standard, but without the key in pin 12 and not every pin routed: ------- H2 |1 |2 | ------- |3 |4 | ------- |5 |6 | ------- |7 |8 | ------- |9 |10| ------- |11|12| ------- |13|14| ------- 3 - TDI 5 - TDO 7 - TMS 9 - TCK 2,4,6,8,10 - GND 14 - Vref 1,11,12,13 - Not connected Installation: There are two methods of installation: - Using serial console [1] - requires some disassembly, 3.3V USB-Serial adapter, TFTP server, and removing a single T10 screw, but with much less manual steps, and is generally recommended, being safer. - Using stock firmware root shell exploit, SSH and TFTP [2]. Does not work on some rare versions of stock firmware. A more involved, and requires installing `mkenvimage` from u-boot-tools package if you choose to rebuild your own environment, but can be used without disassembly or removal from installation point, if you have the credentials. If for some reason, size of your sysupgrade image exceeds 13312kB, proceed with method [1]. For official images this is not likely to happen ever. [1] Using serial console: 0. Connect serial console to H1 header. Ensure the serial converter does not back-power the board, otherwise it will fail to boot. 1. Power-on the board. Then quickly connect serial converter to PC and hit Ctrl+C in the terminal to break boot sequence. If you're lucky, you'll enter U-boot shell. Then skip to point 3. Connection parameters are 115200-8-N-1. 2. Allow the board to boot. Press the reset button, so the board reboots into U-boot again and go back to point 1. 3. Set the "bootcmd" variable to disable the dual-boot feature of the system and ensure that uImage is loaded. This is critical step, and needs to be done only on initial installation. > setenv bootcmd "bootm 0x9f040000" > saveenv 4. Boot the OpenWrt initramfs using TFTP. Replace IP addresses as needed: > setenv serverip 192.168.1.2 > setenv ipaddr 192.168.1.1 > tftpboot 0x81000000 openwrt-ath79-generic-ruckus_zf7372-initramfs-kernel.bin > bootm 0x81000000 5. Optional, but highly recommended: back up contents of "firmware" partition: $ ssh root@192.168.1.1 cat /dev/mtd1 > ruckus_zf7372_fw1_backup.bin $ ssh root@192.168.1.1 cat /dev/mtd5 > ruckus_zf7372_fw2_backup.bin 6. Copy over sysupgrade image, and perform actual installation. OpenWrt shall boot from flash afterwards: $ ssh root@192.168.1.1 # sysupgrade -n openwrt-ath79-generic-ruckus_zf7372-squashfs-sysupgrade.bin [2] Using stock root shell: 0. Reset the device to factory defaullts. Power-on the device and after it boots, hold the reset button near Ethernet connectors for 5 seconds. 1. Connect the device to the network. It will acquire address over DHCP, so either find its address using list of DHCP leases by looking for label MAC address, or try finding it by scanning for SSH port: $ nmap 10.42.0.0/24 -p22 From now on, we assume your computer has address 10.42.0.1 and the device has address 10.42.0.254. 2. Set up a TFTP server on your computer. We assume that TFTP server root is at /srv/tftp. 3. Obtain root shell. Connect to the device over SSH. The SSHD ond the frmware is pretty ancient and requires enabling HMAC-MD5. $ ssh 10.42.0.254 \ -o UserKnownHostsFile=/dev/null \ -o StrictHostKeyCheking=no \ -o MACs=hmac-md5 Login. User is "super", password is "sp-admin". Now execute a hidden command: Ruckus It is case-sensitive. Copy and paste the following string, including quotes. There will be no output on the console for that. ";/bin/sh;" Hit "enter". The AP will respond with: grrrr OK Now execute another hidden command: !v54! At "What's your chow?" prompt just hit "enter". Congratulations, you should now be dropped to Busybox shell with root permissions. 4. Optional, but highly recommended: backup the flash contents before installation. At your PC ensure the device can write the firmware over TFTP: $ sudo touch /srv/tftp/ruckus_zf7372_firmware{1,2}.bin $ sudo chmod 666 /srv/tftp/ruckus_zf7372_firmware{1,2}.bin Locate partitions for primary and secondary firmware image. NEVER blindly copy over MTD nodes, because MTD indices change depending on the currently active firmware, and all partitions are writable! # grep rcks_wlan /proc/mtd Copy over both images using TFTP, this will be useful in case you'd like to return to stock FW in future. Make sure to backup both, as OpenWrt uses bot firmwre partitions for storage! # tftp -l /dev/<rcks_wlan.main_mtd> -r ruckus_zf7372_firmware1.bin -p 10.42.0.1 # tftp -l /dev/<rcks_wlan.bkup_mtd> -r ruckus_zf7372_firmware2.bin -p 10.42.0.1 When the command finishes, copy over the dump to a safe place for storage. $ cp /srv/tftp/ruckus_zf7372_firmware{1,2}.bin ~/ 5. Ensure the system is running from the BACKUP image, i.e. from rcks_wlan.bkup partition or "image 2". Otherwise the installation WILL fail, and you will need to access mtd0 device to write image which risks overwriting the bootloader, and so is not covered here and not supported. Switching to backup firmware can be achieved by executing a few consecutive reboots of the device, or by updating the stock firmware. The system will boot from the image it was not running from previously. Stock firmware available to update was conveniently dumped in point 4 :-) 6. Prepare U-boot environment image. Install u-boot-tools package. Alternatively, if you build your own images, OpenWrt provides mkenvimage in host staging directory as well. It is recommended to extract environment from the device, and modify it, rather then relying on defaults: $ sudo touch /srv/tftp/u-boot-env.bin $ sudo chmod 666 /srv/tftp/u-boot-env.bin On the device, find the MTD partition on which environment resides. Beware, it may change depending on currently active firmware image! # grep u-boot-env /proc/mtd Now, copy over the partition # tftp -l /dev/mtd<N> -r u-boot-env.bin -p 10.42.0.1 Store the stock environment in a safe place: $ cp /srv/tftp/u-boot-env.bin ~/ Extract the values from the dump: $ strings u-boot-env.bin | tee u-boot-env.txt Now clean up the debris at the end of output, you should end up with each variable defined once. After that, set the bootcmd variable like this: bootcmd=bootm 0x9f040000 You should end up with something like this: bootcmd=bootm 0x9f040000 bootargs=console=ttyS0,115200 rootfstype=squashfs init=/sbin/init baudrate=115200 ethaddr=0x00:0xaa:0xbb:0xcc:0xdd:0xee bootdelay=2 mtdids=nor0=ar7100-nor0 mtdparts=mtdparts=ar7100-nor0:256k(u-boot),13312k(rcks_wlan.main),2048k(datafs),256k(u-boot-env),512k(Board Data),13312k(rcks_wlan.bkup) ethact=eth0 filesize=1000000 fileaddr=81000000 ipaddr=192.168.0.7 serverip=192.168.0.51 partition=nor0,0 mtddevnum=0 mtddevname=u-boot stdin=serial stdout=serial stderr=serial These are the defaults, you can use most likely just this as input to mkenvimage. Now, create environment image and copy it over to TFTP root: $ mkenvimage -s 0x40000 -b -o u-boot-env.bin u-boot-env.txt $ sudo cp u-boot-env.bin /srv/tftp This is the same image, gzipped and base64-encoded: H4sIAAAAAAAAA+3QTW7TQBQAYB+AQ2TZSGk6Tpv+SbNBrNhyADSJHWolsYPtlJaDcAWOCXaqQhdIXOD7 Fm/ee+MZ+/nHu58fV03Tr/dFHNf9JDzdbcJVGGRjI7Vfurhu6q7ZlbHvnz+FWZ4vFyFM2mF30/XPhzJ2 X4+pe9h0k6qu+njRrar6YkyzVToWberL+HImK/uHVBRtDE8h3IenlIawWg1hvR5CUQyhLE/vLcpdeo6L bN8XVdHFumlDTO1NHsL5mI/9Q2r7Lv5J3uzeL5bX27Pj+XjRdJZfXuaL7Vm73nafv+1SPd+nqp7OFuHq dntWpD5tuqH6e+K8rB+ns+V45n2T2mLyYXjmH9estsfD9DTSuo/DErJNtSu76vswbjg5NU4D3752qsOp zu8W8/z6dh7mN1lXto9lWx3eNJd5Ng5V9VVTn2afnSYuysf6uI9/8rQv48s3Z93wn+o4XFWl3Vg0x/5N Vbbta5X9AgAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAID/+Q2Z/B7cAAAEAA== 7. Perform actual installation. Copy over OpenWrt sysupgrade image to TFTP root: $ sudo cp openwrt-ath79-generic-ruckus_zf7372-squashfs-sysupgrade.bin /srv/tftp Now load both to the device over TFTP: # tftp -l /tmp/u-boot-env.bin -r u-boot-env.bin -g 10.42.0.1 # tftp -l /tmp/openwrt.bin -r openwrt-ath79-generic-ruckus_zf7372-squashfs-sysupgrade.bin -g 10.42.0.1 Verify checksums of both images to ensure the transfer over TFTP was completed: # sha256sum /tmp/u-boot-env.bin /tmp/openwrt.bin And compare it against source images: $ sha256sum /srv/tftp/u-boot-env.bin /srv/tftp/openwrt-ath79-generic-ruckus_zf7372-squashfs-sysupgrade.bin Locate MTD partition of the primary image: # grep rcks_wlan.main /proc/mtd Now, write the images in place. Write U-boot environment last, so unit still can boot from backup image, should power failure occur during this. Replace MTD placeholders with real MTD nodes: # flashcp /tmp/openwrt.bin /dev/<rcks_wlan.main_mtd> # flashcp /tmp/u-boot-env.bin /dev/<u-boot-env_mtd> Finally, reboot the device. The device should directly boot into OpenWrt. Look for the characteristic power LED blinking pattern. # reboot -f After unit boots, it should be available at the usual 192.168.1.1/24. Return to factory firmware: 1. Boot into OpenWrt initramfs as for initial installation. To do that without disassembly, you can write an initramfs image to the device using 'sysupgrade -F' first. 2. Unset the "bootcmd" variable: fw_setenv bootcmd "" 3. Write factory images downloaded from manufacturer website into fwconcat0 and fwconcat1 MTD partitions, or restore backup you took before installation: mtd write ruckus_zf7372_fw1_backup.bin /dev/mtd1 mtd write ruckus_zf7372_fw2_backup.bin /dev/mtd5 4. Reboot the system, it should load into factory firmware again. Quirks and known issues: - This is first device in ath79 target to support link state reporting on FE port attached trough the built-in switch. - Flash layout is changed from the factory, to use both firmware image partitions for storage using mtd-concat, and uImage format is used to actually boot the system, which rules out the dual-boot capability. The 5GHz radio has its own EEPROM on board, not connected to CPU. - The stock firmware has dual-boot capability, which is not supported in OpenWrt by choice. It is controlled by data in the top 64kB of RAM which is unmapped, to avoid the interference in the boot process and accidental switch to the inactive image, although boot script presence in form of "bootcmd" variable should prevent this entirely. - U-boot disables JTAG when starting. To re-enable it, you need to execute the following command before booting: mw.l 1804006c 40 And also you need to disable the reset button in device tree if you intend to debug Linux, because reset button on GPIO0 shares the TCK pin. - On some versions of stock firmware, it is possible to obtain root shell, however not much is available in terms of debugging facitilies. 1. Login to the rkscli 2. Execute hidden command "Ruckus" 3. Copy and paste ";/bin/sh;" including quotes. This is required only once, the payload will be stored in writable filesystem. 4. Execute hidden command "!v54!". Press Enter leaving empty reply for "What's your chow?" prompt. 5. Busybox shell shall open. Source: https://alephsecurity.com/vulns/aleph-2019014 - Stock firmware has beamforming functionality, known as BeamFlex, using active multi-segment antennas on both bands - controlled by RF analog switches, driven by a pair of 74LV164 shift registers. Shift registers used for each radio are connected to GPIO14 (clock) and GPIO15 of the respective chip. They are mapped as generic GPIOs in OpenWrt - in stock firmware, they were most likely handled directly by radio firmware, given the real-time nature of their control. Lack of this support in OpenWrt causes the antennas to behave as ordinary omnidirectional antennas, and does not affect throughput in normal conditions, but GPIOs are available to tinker with nonetheless. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit 59cb4dc91d500edc2e6b462e223e367806557cc5)
* kernel: add kmod-nvme packageDaniel Golle2022-10-231-0/+23
| | | | | | | | | | | | | | | | | Add driver for NVM Express block devices, ie. PCIe connected SSDs. Targets which allow booting from NVMe (x86, maybe some mvebu boards come to mind) should have it built-in, so rootfs can be mounted from there. For targets without NVMe support in bootloader or BIOS/firmware it's sufficient to provide the kernel module package. On targets having the NVMe driver built-in the resulting kmod package is an empty dummy. In any case, depending on or installing kmod-nvme results in driver support being available (either because it was already built-in or because the relevant kernel modules are added and loaded). Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit dbe53352e38d20bb5245158b19d4ff810c209548)
* ucode: update to latest Git HEADJo-Philipp Wich2022-10-181-3/+3
| | | | | | | | 00af065 fs: expose `getdelim()` functionality through `fd.read()` 21ace5e lexer: fixes for regex literal parsing Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 1b90c7441b81aee7b1212e8918e3ec7144375d96)
* firewall4: update to latest Git HEADJo-Philipp Wich2022-10-181-3/+3
| | | | | | | 7ae5e14 fw4: gracefully handle `null` return values from `fd.read("line")` Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 5e2e048c0e7c16d7967ec7a0cd8a9c01aa0f12b1)
* OpenWrt v22.03.2: revert to branch defaultsHauke Mehrtens2022-10-151-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v22.03.2: adjust config defaultsv22.03.2Hauke Mehrtens2022-10-151-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* firewall4: update to latest Git HEADJo-Philipp Wich2022-10-151-3/+3
| | | | | | | | | | | | | | | | 4fbf6d7 ruleset.uc: log forwarded traffic not matched by zone policies c7201a3 main.uc: reintroduce set reload restriction 756f1e2 ruleset: fix emitting set_mark/set_xmark rules with masks 3db4741 ruleset: properly handle zone names starting with a digit 43d8ef5 fw4: fix formatting of default log prefix 592ba45 main.uc: remove uneeded/wrong set reload restrictions b0a6bff tests: fix testcases 145e159 fw4: recognize `option log` and `option counter` in `config nat` sections ce050a8 fw4: fall back to device if l3_device is not available in ifstatus Fixes: #10639, #10965 Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit fdfa9d8f7469626d2dc8e4b46a6ad56a3b27c16b)
* ucode: update to latest Git HEADJo-Philipp Wich2022-10-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | 4ae7072 fs: use `getline()` for line wise read operations 21ace5e lexer: fixes for regex literal parsing 00965fa lib: implement slice() function 76d396d main: implement print mode 7bbba78 compiler: optimize function return opcode generation a45f2a3 lexer: improve regex literal handling d64d5d6 vm: maintain export symbol tables per program f4b4ded uloop: task: gracefully handle absent output callback a58fe47 ubus: hold reference to underlying connection until deferred is concluded e23b58a lib: uc_system(): retry waitpid() on EINTR cc4eb79 ubus: support obtaining numeric error code 01c412c ubus: add toplevel constants for ubus status codes 8e240fa ubus: allow object method call handlers to return a numeric status code 5cdddd3 lib: add limit support to split() and replace() 0ba9c3e fs: add optional third permission argument to fs.open() c1f7b3b lib: remove fixed capture group limit in match() and regex replace() Signed-off-by: Jo-Philipp Wich <jo@mein.io> (backported from commits 639754e36d849553e288f8e34f51f793761c07db and 5110dcb1fa44fc1aac737c63b31474daa471de89)
* rpcd: update to latest Git HEADJo-Philipp Wich2022-10-151-3/+3
| | | | | | | | | | 8c852b6 ucode: write ucode runtime exceptions to stderr e80d0b2 ucode: pass-through `ubus_rpc_session` argument 0d02243 ucode: initialize module search path early Signed-off-by: Jo-Philipp Wich <jo@mein.io> (backported from commits 94129cbefb6027cdfe2b7801a6e27a36d4ec58b8 and db17c7527107c1dae190608a1313a3977fe4f23f)
* ramips: add support for ZyXEL NWA50AX / NWA55AXEDavid Bauer2022-10-144-0/+392
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Mediatek MT7621 RAM: 256M DDR3 FLASH: 128M NAND ETH: 1x Gigabit Ethernet WiFi: Mediatek MT7915 (2.4/5GHz 802.11ax 2x2 DBDC) BTN: 1x Reset (NWA50AX only) LED: 1x Multi-Color (NWA50AX only) UART Console ------------ NWA50AX: Available below the rubber cover next to the ethernet port. NWA55AXE: Available on the board when disassembling the device. Settings: 115200 8N1 Layout: <12V> <LAN> GND-RX-TX-VCC Logic-Level is 3V3. Don't connect VCC to your UART adapter! Installation Web-UI ------------------- Upload the Factory image using the devices Web-Interface. As the device uses a dual-image partition layout, OpenWrt can only installed on Slot A. This requires the current active image prior flashing the device to be on Slot B. If the currently installed image is started from Slot A, the device will flash OpenWrt to Slot B. OpenWrt will panic upon first boot in this case and the device will return to the ZyXEL firmware upon next boot. If this happens, first install a ZyXEL firmware upgrade of any version and install OpenWrt after that. Installation TFTP ----------------- This installation routine is especially useful in case * unknown device password (NWA55AXE lacks reset button) * bricked device Attach to the UART console header of the device. Interrupt the boot procedure by pressing Enter. The bootloader has a reduced command-set available from CLI, but more commands can be executed by abusing the atns command. Boot a OpenWrt initramfs image available on a TFTP server at 192.168.1.66. Rename the image to owrt.bin $ atnf owrt.bin $ atna 192.168.1.88 $ atns "192.168.1.66; tftpboot; bootm" Upon booting, set the booted image to the correct slot: $ zyxel-bootconfig /dev/mtd10 get-status $ zyxel-bootconfig /dev/mtd10 set-image-status 0 valid $ zyxel-bootconfig /dev/mtd10 set-active-image 0 Copy the OpenWrt ramboot-factory image to the device using scp. Write the factory image to NAND and reboot the device. $ mtd write ramboot-factory.bin firmware $ reboot Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit a0b7fef0ffe4cd9cca39a652a37e4f3ce8f0a681)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 02:12:49 +0000