aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* uqmi: explicitly disconnect IPv6 address familyLech Perczak2023-04-021-0/+1
| | | | | | | | | | Some modems (namely, Telit LE910C4) require the IPv6 connection state to be cleared explicitly, to avoid reporting "no effect" if IPv6 connection is already connected through autoconnect mechanism, or during LTE default bearer attach, which would lead to established session, but without a way to inform protocol handler of the status. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* uqmi: set IPv6 family explicitly in status checkLech Perczak2023-04-021-1/+1
| | | | | | | | | | Some modems require CID to be set explicitly during IPv6 connection status check, others require IPv6 address family to be checked explicitly after establishing connection, in order to provide correct status. Set both fields in the request to satisfy them. Fixes: c8a88118af46 ("uqmi: set CID during 'query-data-status' operation") Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* libnl-tiny: update to the latest versionHauke Mehrtens2023-04-021-3/+3
| | | | | | | f5d9b7e libnl-tiny: fix duplicated branch in family.h 11b7c5f attr: add NLA_S* definitions Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* netifd: strip mask from IP address in DHCP client paramsAndrey Erokhin2023-04-011-1/+1
| | | | | | | ipaddr option can be in CIDR notation, but udhcp wants just an IP address Signed-off-by: Andrey Erokhin <a.erokhin@inango-systems.com>
* dnsmasq: configure dynamic dhcp6 and dhcp4 independentlyIan Dall2023-04-011-2/+4
| | | | | | | | Given ipv6 has SLAAC it is quite plausible to wish to use dynamic dhcp4 but static dhcp6. This patch keeps dynamicdhcp as the default option for both, but is overridden by dynamicdhcpv6 or dynamicdhcpv4 Signed-off-by: Ian Dall <ian@beware.dropbear.id.au>
* dnsmasq: add dhcphostsfile to ujail sandboxRuben Jenster2023-04-011-0/+1
| | | | | | | The dhcphostsfile must be mounted into the (ujail) sandbox. The file can not be accessed without this mount. Signed-off-by: Ruben Jenster <rjenster@gmail.com>
* kernel: modules: tg3: limit to devices with pci supportAleksander Jan Bajkowski2023-04-011-1/+1
| | | | | | | | Kmod-tg3 supports Ethernet adapters over PCIe bus. On targets without PCI support, this package is empty. Symbol CONFIG_TIGON3 depends on CONFIG_PCI. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: modules: hfcpci: limit to devices with pci supportAleksander Jan Bajkowski2023-04-011-2/+2
| | | | | | | | Kmod-hfcpci and kmod-hfcmulti supports ISDN adapters over PCI. On targets without PCI support, this package is empty. Symbol CONFIG_MISDN_HFCMULTI and CONFIG_MISDN_HFCPCI depends on CONFIG_PCI. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* libtraceevent: update to 1.7.2Nick Hainke2023-04-011-2/+2
| | | | | | | | | | | Changes: 1c6f0f3 libtraceevent: version 1.7.2 73f6a8a libtraceevent: Fix some missing commas in big endian blocks da2ea6b libtraceevent: Rename "ok" to "token_has_paren" in process_sizeof() e6f7cfa libtraceevent: No need for testing ok in else if (!ok) in process_sizeof() a4b1ba5 libtraceevent: Fix double free in parsing sizeof() Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: ath11k: restore 160MHz supportRobert Marko2023-04-011-0/+29
| | | | | | | | | | | | Recent ath11k sync introduced a regression causing 80+80 and 160MHz to stop being advertised and thus not selectable due to the respective feature flags being cleared. So, until we get answers upstream to what was the reasoning behind this and it gets fixed, lets just remove the flag clearing to reanable 160MHz. Fixes: 789a0bac3535 ("mac80211: ath11k: sync with ath-next") Signed-off-by: Robert Marko <robimarko@gmail.com>
* busybox: enable taskset by defaultFelix Fietkau2023-04-011-3/+3
| | | | | | This is useful for controlling process affinity on SMP systems Signed-off-by: Felix Fietkau <nbd@nbd.name>
* arm-trusted-firmware-sunxi: bump to 2.8Stijn Tintel2023-04-011-6/+2
| | | | | | | | | | | | Use latest release build instead of a git snapshot. As this tarball extracts in a trusted-firmware-a-2.8 subdirectory, we no longer need to override the PKG_NAME defined in trusted-firmware-a.mk. The actual package name is still the same, so we don't need to update any dependencies. Tested on A64-OLinuXino-1Ge16GW. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* uboot-sunxi: bump to 2020.07Stijn Tintel2023-04-0113-24/+43
| | | | | | | | | This is the newest release where 210-sunxi-deactivate-binman.patch still applies. Tested on A64-Olinuxino-eMMC. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* mac80211, mt76: add fixes for recently discovered security issuesFelix Fietkau2023-03-307-0/+685
| | | | | | Fixes CVE-2022-47522 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* comgt: ncm: support Mikrotik R11e-LTE6 modemSzabolcs Hubai2023-03-291-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Mikrotik R11e-LTE6 modem is similar to ZTE MF286R modem, added earlier: it has a Marvel chip, able to work in ACM+RNDIS mode, knows ZTE specific commands, runs OpenWrt Barrier Breaker fork. While the modem is able to offer IPv6 address, the RNDIS setup is unable to complete if there is an IPv6 adress. While it works in ACM+RNDIS mode, the user experience isn't as good as with "proto 3g": the modem happily serves a local IP (192.168.1.xxx) without internet access. Of course, if the modem has enough time (for example at the second dialup), it will serve a public IP. Modifing the DHCP Lease (to a short interval before connect and back to default while finalizing) is a workaround to get a public IP at the first try. A safe workaround for this is to excercise an offline script of the pingcheck program: simply restart (ifdown - ifup) the connection. Another pitfall is that the modem writes a few messages at startup, which confuses the manufacturer detection algorithm and got disabled. daemon.notice netifd: Interface 'mikrotik' is setting up now daemon.notice netifd: mikrotik (2366): Failed to parse message data daemon.notice netifd: mikrotik (2366): WARNING: Variable 'ok' does not exist or is not an array/object daemon.notice netifd: mikrotik (2366): Unsupported modem daemon.notice netifd: mikrotik (2426): Stopping network mikrotik daemon.notice netifd: mikrotik (2426): Failed to parse message data daemon.notice netifd: mikrotik (2426): WARNING: Variable '*simdetec:1,sim' does not exist or is not an array/object daemon.notice netifd: mikrotik (2426): Unsupported modem daemon.notice netifd: Interface 'mikrotik' is now down A workaround for this is to use the "delay" option in the interface configuration. I want to thank Forum members dchard (in topic Adding support for MikroTik hAP ac3 LTE6 kit (D53GR_5HacD2HnD)) [1] and mrhaav (in topic OpenWrt X86_64 + Mikrotik R11e-LTE6) [2] for sharing their experiments and works. Another information page was found at eko.one.pl [3]. [1]: https://forum.openwrt.org/t/137555 [2]: https://forum.openwrt.org/t/151743 [3]: https://eko.one.pl/?p=modem-r11elte Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com>
* comgt: add quirk for Mikrotik modems based on Mikrotik R11e-LTE6Szabolcs Hubai2023-03-292-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik R11e-LTE6 modem goes into flight mode (CFUN=4) at startup and the radio is off (*RADIOPOWER: 0): AT+RESET OK OK *SIMDETEC:2,NOS *SIMDETEC:1,SIM *ICCID: 8936500119010596302 *EUICC: 1 +MSTK: 11, D025....74F3 *ADMINDATA: 0, 2, 0 +CPIN: READY *EUICC: 1 *ECCLIST: 5, 0, 112, 0, 000, 0, 08, 0, 118, 0, 911 +CREG: 0 $CREG: 0 +CESQ: 99,99,255,255,255,255 *CESQ: 99,99,255,255,255,255,0 +CGREG: 0 +CEREG: 0 +CESQ: 99,99,255,255,255,255 *CESQ: 99,99,255,255,255,255,0 *RADIOPOWER: 0 +MMSG: 0, 0 +MMSG: 0, 0 +MMSG: 1, 0 +MPBK: 1 While the chat script is able to establish the PPP connection, it's closed instantly by the modem: LCP terminated by peer. local2.info chat[7000]: send (ATD*99***1#^M) local2.info chat[7000]: expect (CONNECT) local2.info chat[7000]: ^M local2.info chat[7000]: ATD*99***1#^M^M local2.info chat[7000]: CONNECT local2.info chat[7000]: -- got it local2.info chat[7000]: send ( ^M) daemon.info pppd[6997]: Serial connection established. kern.info kernel: [ 453.659146] 3g-mikrotik: renamed from ppp0 daemon.info pppd[6997]: Renamed interface ppp0 to 3g-mikrotik daemon.info pppd[6997]: Using interface 3g-mikrotik daemon.notice pppd[6997]: Connect: 3g-mikrotik <--> /dev/ttyACM0 daemon.info pppd[6997]: LCP terminated by peer daemon.notice pppd[6997]: Connection terminated. daemon.notice pppd[6997]: Modem hangup daemon.info pppd[6997]: Exit. daemon.notice netifd: Interface 'mikrotik' is now down Sending "AT+CFUN=1" to modem deactivates the flight mode and solves the issue: daemon.notice netifd: Interface 'mikrotik' is setting up now daemon.notice netifd: mikrotik (7051): sending -> AT+CFUN=1 daemon.notice pppd[7137]: pppd 2.4.9 started by root, uid 0 local2.info chat[7140]: abort on (BUSY) local2.info chat[7140]: abort on (NO CARRIER) local2.info chat[7140]: abort on (ERROR) local2.info chat[7140]: report (CONNECT) local2.info chat[7140]: timeout set to 10 seconds local2.info chat[7140]: send (AT&F^M) local2.info chat[7140]: expect (OK) local2.info chat[7140]: ^M local2.info chat[7140]: +CESQ: 99,99,255,255,255,255^M local2.info chat[7140]: ^M local2.info chat[7140]: *CESQ: 99,99,255,255,255,255,0^M local2.info chat[7140]: AT&F^MAT&F^M^M local2.info chat[7140]: OK local2.info chat[7140]: -- got it ... local2.info chat[7140]: send (ATD*99***1#^M) local2.info chat[7140]: expect (CONNECT) local2.info chat[7140]: ^M local2.info chat[7140]: ATD*99***1#^M^M local2.info chat[7140]: CONNECT local2.info chat[7140]: -- got it local2.info chat[7140]: send ( ^M) daemon.info pppd[7137]: Serial connection established. kern.info kernel: [ 463.094254] 3g-mikrotik: renamed from ppp0 daemon.info pppd[7137]: Renamed interface ppp0 to 3g-mikrotik daemon.info pppd[7137]: Using interface 3g-mikrotik daemon.notice pppd[7137]: Connect: 3g-mikrotik <--> /dev/ttyACM0 daemon.warn pppd[7137]: Could not determine remote IP address: defaulting to 10.64.64.64 daemon.notice pppd[7137]: local IP address 100.112.63.62 daemon.notice pppd[7137]: remote IP address 10.64.64.64 daemon.notice pppd[7137]: primary DNS address 185.29.83.64 daemon.notice pppd[7137]: secondary DNS address 185.62.131.64 daemon.notice netifd: Network device '3g-mikrotik' link is up daemon.notice netifd: Interface 'mikrotik' is now up To send this AT command to the modem the "runcommand.gcom" script dependency is moved from comgt-ncm to comgt. As the comgt-ncm package depends on comgt already, this change is a NOOP from that point of view. But from the modem's point it is a low hanging fruit as the modem is usable with installing comgt and kmod-usb-ncm packages. Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com>
* ncm: add error check and retry mechanism for gcom callMike Wilson2023-03-281-4/+19
| | | | | | | | | | | | This patch solves the problem of receiving "error" responses when initially calling gcom. This avoids unnecessary NO_DEVICE failures. A retry loop retries the call after an "error" response within the specified delay. A successful response will continue with the connection immediately without waiting for max specified delay, bringing the interface up sooner. Signed-off-by: Mike Wilson <mikewse@hotmail.com>
* ipq-wifi: bump to latest git HEADChristian Marangi2023-03-271-3/+3
| | | | | | | | ccd7e46 ipq40xx: add support for Wallystech DR40x9 2ce60e1 Revert "ipq40xx: add support for Wallystech DR40x9" ea962ca ipq40xx: add Emplus WAP551 BDF Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ramips: add support for Keenetic Lite III rev. AAlexey Bartenev2023-03-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | General specification: SoC Type: MediaTek MT7620N (580MHz) ROM: 8 MB SPI-NOR (W25Q64FV) RAM: 64 MB DDR (EM6AB160TSD-5G) Switch: MediaTek MT7530 Ethernet: 5 ports - 5×100MbE (WAN, LAN1-4) Wireless: 2.4 GHz (MediaTek RT5390): b/g/n Buttons: 3 button (POWER, RESET, WPS) Slide switch: 4 position (BASE, ADAPTER, BOOSTER, ACCESS POINT) Bootloader: U-Boot 1.1.3 Power: 9 VDC, 0.6 A MAC in stock: |- + | | LAN | RF-EEPROM + 0x04 | | WLAN | RF-EEPROM + 0x04 | | WAN | RF-EEPROM + 0x28 | OEM easy installation 1. Use a PC to browse to http://my.keenetic.net. 2. Go to the System section and open the Files tab. 3. Under the Files tab, there will be a list of system files. Click on the Firmware file. 4. When a modal window appears, click on the Choose File button and upload the firmware image. 5. Wait for the router to flash and reboot. OEM installation using the TFTP method 1. Download the latest firmware image and rename it to klite3_recovery.bin. 2. Set up a Tftp server on a PC (e.g. Tftpd32) and place the firmware image to the root directory of the server. 3. Power off the router and use a twisted pair cable to connect the PC to any of the router's LAN ports. 4. Configure the network adapter of the PC to use IP address 192.168.1.2 and subnet mask 255.255.255.0. 5. Power up the router while holding the reset button pressed. 6. Wait approximately for 5 seconds and then release the reset button. 7. The router should download the firmware via TFTP and complete flashing in a few minutes. After flashing is complete, use the PC to browse to http://192.168.1.1 or ssh to proceed with the configuration. Signed-off-by: Alexey Bartenev <41exey@proton.me>
* ath79: Add Aruba AP-175 supportMartin Kennedy2023-03-271-10/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board is very similar to the Aruba AP-105, but is outdoor-first. It is very similar to the MSR2000 (though certain MSR2000 models have a different PHY[^1]). A U-Boot replacement is required to install OpenWrt on these devices[^2]. Specifications -------------- * Device: Aruba AP-175 * SoC: Atheros AR7161 680 MHz MIPS * RAM: 128MB - 2x Mira P3S12D40ETP * Flash: 16MB MXIC MX25L12845EMI-10G (SPI-NOR) * WiFi: 2 x DNMA-H92 Atheros AR9220-AC1A 802.11abgn * ETH: IC+ IP1001 Gigabit + PoE PHY * LED: 2x int., plus 12 ext. on TCA6416 GPIO expander * Console: CP210X linking USB-A Port to CPU console @ 115200 * RTC: DS1374C, with internal battery * Temp: LM75 temperature sensor Factory installation: - Needs a u-boot replacement. The process is almost identical to that of the AP105, except that the case is easier to open, and that you need to compile u-boot from a slightly different branch: https://github.com/Hurricos/u-boot-ap105/tree/ap175 The instructions for performing an in-circuit reflash with an SPI-Flasher like a CH314A can be found on the OpenWrt Wiki (https://openwrt.org/toh/aruba/ap-105); in addition a detailed guide may be found on YouTube[^3]. - Once u-boot has been replaced, a USB-A-to-A cable may be used to connect your PC to the CP210X inside the AP at 115200 baud; at this point, the normal u-boot serial flashing procedure will work (set up networking; tftpboot and boot an OpenWrt initramfs; sysupgrade to OpenWrt proper.) - There is no built-in functionality to revert back to stock firmware, because the AP-175 has been declared by the vendor[^4] end-of-life as of 31 Jul 2020. If for some reason you wish to return to stock firmware, take a backup of the 16MiB flash before flashing u-boot. [^1]: https://github.com/shalzz/aruba-ap-310/blob/master/platform/bootloader/apboot-11n/include/configs/msr2k.h#L186 [^2]: https://github.com/Hurricos/u-boot-ap105/tree/ap175 [^3]: https://www.youtube.com/watch?v=Vof__dPiprs [^4]: https://www.arubanetworks.com/support-services/end-of-life/#product=access-points&version=0 Signed-off-by: Martin Kennedy <hurricos@gmail.com>
* mac80211: fix receiving mesh packets in forwarding=0 networksFelix Fietkau2023-03-261-0/+50
| | | | | | | | When forwarding is set to 0, frames are typically sent with ttl=1. Move the ttl decrement check below the check for local receive in order to fix packet drops. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* util-linux: add rev utility packageOskari Rauta2023-03-251-1/+18
| | | | | | | | | | | | I found use for this in my scripts; I noticed that it is already compiled with util-linux - there just isn't package for it - let's package it then. Description: The rev utility copies the specified files to the standard output, reversing the order of characters in everyline. Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
* mac80211: fix invalid calls to drv_sta_pre_rcu_removeFelix Fietkau2023-03-241-0/+25
| | | | | | Potentially fixes some driver data structure corruption issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
* firewall4: update to the latest versionFelix Fietkau2023-03-241-3/+3
| | | | | | | | | | | 39e8c70957c7 fw4: fix handling the ipset "comment" option e6e82a55206c fw4: add further symbolic ICMP type declarations ce9a37829a76 tests: add testcase for automatic includes 30ee17a9c65d fw4: fix syntax errors in ICMP type declarations 1ecfadd52291 fw4: remove accidentally committed .orig and .rej file 04a06bd70b98 fw4: enable flowtable counters Signed-off-by: Felix Fietkau <nbd@nbd.name>
* odhcpd: bump to latest git HEADChristian Marangi2023-03-241-3/+3
| | | | | | 29c934d config: recheck have_link_local on interface reload if already init Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mediatek: add kernel code for supporting offloading wlan->eth and wlan->wlan ↵Felix Fietkau2023-03-232-4/+153
| | | | | | | | flows Will be enabled by an upcoming mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath79: support Ruckus ZoneFlex 7341/7343/7363Lech Perczak2023-03-221-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ruckus ZoneFlex 7363 is a dual-band, dual-radio 802.11n 2x2 MIMO enterprise access point. ZoneFlex 7343 is the single band variant of 7363 restricted to 2.4GHz, and ZoneFlex 7341 is 7343 minus two Fast Ethernet ports. Hardware highligts: - CPU: Atheros AR7161 SoC at 680 MHz - RAM: 64MB DDR - Flash: 16MB SPI-NOR - Wi-Fi 2.4GHz: AR9280 PCI 2x2 MIMO radio with external beamforming - Wi-Fi 5GHz: AR9280 PCI 2x2 MIMO radio with external beamforming - Ethernet 1: single Gigabit Ethernet port through Marvell 88E1116R gigabit PHY - Ethernet 2: two Fast Ethernet ports through Realtek RTL8363S switch, connected with Fast Ethernet link to CPU. - PoE: input through Gigabit port - Standalone 12V/1A power input - USB: optional single USB 2.0 host port on the -U variants. Serial console: 115200-8-N-1 on internal H1 header. Pinout: H1 ---------- |1|x3|4|5| ---------- Pin 1 is near the "H1" marking. 1 - RX x - no pin 3 - VCC (3.3V) 4 - GND 5 - TX Installation: - Using serial console - requires some disassembly, 3.3V USB-Serial adapter, TFTP server, and removing a single PH1 screw. 0. Connect serial console to H1 header. Ensure the serial converter does not back-power the board, otherwise it will fail to boot. 1. Power-on the board. Then quickly connect serial converter to PC and hit Ctrl+C in the terminal to break boot sequence. If you're lucky, you'll enter U-boot shell. Then skip to point 3. Connection parameters are 115200-8-N-1. 2. Allow the board to boot. Press the reset button, so the board reboots into U-boot again and go back to point 1. 3. Set the "bootcmd" variable to disable the dual-boot feature of the system and ensure that uImage is loaded. This is critical step, and needs to be done only on initial installation. > setenv bootcmd "bootm 0xbf040000" > saveenv 4. Boot the OpenWrt initramfs using TFTP. Replace IP addresses as needed. Use the Gigabit interface, Fast Ethernet ports are not supported under U-boot: > setenv serverip 192.168.1.2 > setenv ipaddr 192.168.1.1 > tftpboot 0x81000000 openwrt-ath79-generic-ruckus_zf7363-initramfs-kernel.bin > bootm 0x81000000 5. Optional, but highly recommended: back up contents of "firmware" partition: $ ssh root@192.168.1.1 cat /dev/mtd1 > ruckus_zf7363_fw_backup.bin 6. Copy over sysupgrade image, and perform actual installation. OpenWrt shall boot from flash afterwards: $ ssh root@192.168.1.1 # sysupgrade -n openwrt-ath79-generic-ruckus_zf7363-squashfs-sysupgrade.bin After unit boots, it should be available at the usual 192.168.1.1/24. Return to factory firmware: 1. Copy over the backup to /tmp, for example using scp 2. Unset the "bootcmd" variable: fw_setenv bootcmd "" 3. Use sysupgrade with force to restore the backup: sysupgrade -F ruckus_zf7363_backup.bin 4. System will reboot. Quirks and known issues: - Fast Ethernet ports on ZF7363 and ZF7343 are supported, but management features of the RTL8363S switch aren't implemented yet, though the switch is visible over MDIO0 bus. This is a gigabit-capable switch, so link establishment with a gigabit link partner may take a longer time because RTL8363S advertises gigabit, and the port magnetics don't support it, so a downshift needs to occur. Both ports are accessible at eth1 interface, which - strangely - runs only at 100Mbps itself. - Flash layout is changed from the factory, to use both firmware image partitions for storage using mtd-concat, and uImage format is used to actually boot the system, which rules out the dual-boot capability. - Both radio has its own EEPROM on board, not connected to CPU. - The stock firmware has dual-boot capability, which is not supported in OpenWrt by choice. It is controlled by data in the top 64kB of RAM which is unmapped, to avoid the interference in the boot process and accidental switch to the inactive image, although boot script presence in form of "bootcmd" variable should prevent this entirely. - On some versions of stock firmware, it is possible to obtain root shell, however not much is available in terms of debugging facitilies. 1. Login to the rkscli 2. Execute hidden command "Ruckus" 3. Copy and paste ";/bin/sh;" including quotes. This is required only once, the payload will be stored in writable filesystem. 4. Execute hidden command "!v54!". Press Enter leaving empty reply for "What's your chow?" prompt. 5. Busybox shell shall open. Source: https://alephsecurity.com/vulns/aleph-2019014 - There is second method to achieve root shell, using command injection in the web interface: 1. Login to web administration interface 2. Go to Administration > Diagnostics 3. Enter |telnetd${IFS}-p${IFS}204${IFS}-l${IFS}/bin/sh into "ping" field 4. Press "Run test" 5. Telnet to the device IP at port 204 6. Busybox shell shall open. Source: https://github.com/chk-jxcn/ruckusremoteshell Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: support Ruckus ZoneFlex 7351Lech Perczak2023-03-221-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ruckus ZoneFlex 7351 is a dual-band, dual-radio 802.11n 2x2 MIMO enterprise access point. Hardware highligts: - CPU: Atheros AR7161 SoC at 680 MHz - RAM: 64MB DDR - Flash: 16MB SPI-NOR - Wi-Fi 2.4GHz: AR9280 PCI 2x2 MIMO radio with external beamforming - Wi-Fi 5GHz: AR9280 PCI 2x2 MIMO radio with external beamforming - Ethernet: single Gigabit Ethernet port through Marvell 88E1116R gigabit PHY - Standalone 12V/1A power input - USB: optional single USB 2.0 host port on the 7351-U variant. Serial console: 115200-8-N-1 on internal H1 header. Pinout: H1 ---------- |1|x3|4|5| ---------- Pin 1 is near the "H1" marking. 1 - RX x - no pin 3 - VCC (3.3V) 4 - GND 5 - TX Installation: - Using serial console - requires some disassembly, 3.3V USB-Serial adapter, TFTP server, and removing a single T10 screw. 0. Connect serial console to H1 header. Ensure the serial converter does not back-power the board, otherwise it will fail to boot. 1. Power-on the board. Then quickly connect serial converter to PC and hit Ctrl+C in the terminal to break boot sequence. If you're lucky, you'll enter U-boot shell. Then skip to point 3. Connection parameters are 115200-8-N-1. 2. Allow the board to boot. Press the reset button, so the board reboots into U-boot again and go back to point 1. 3. Set the "bootcmd" variable to disable the dual-boot feature of the system and ensure that uImage is loaded. This is critical step, and needs to be done only on initial installation. > setenv bootcmd "bootm 0xbf040000" > saveenv 4. Boot the OpenWrt initramfs using TFTP. Replace IP addresses as needed: > setenv serverip 192.168.1.2 > setenv ipaddr 192.168.1.1 > tftpboot 0x81000000 openwrt-ath79-generic-ruckus_zf7351-initramfs-kernel.bin > bootm 0x81000000 5. Optional, but highly recommended: back up contents of "firmware" partition: $ ssh root@192.168.1.1 cat /dev/mtd1 > ruckus_zf7351_fw_backup.bin 6. Copy over sysupgrade image, and perform actual installation. OpenWrt shall boot from flash afterwards: $ ssh root@192.168.1.1 # sysupgrade -n openwrt-ath79-generic-ruckus_zf7351-squashfs-sysupgrade.bin After unit boots, it should be available at the usual 192.168.1.1/24. Return to factory firmware: 1. Copy over the backup to /tmp, for example using scp 2. Unset the "bootcmd" variable: fw_setenv bootcmd "" 3. Use sysupgrade with force to restore the backup: sysupgrade -F ruckus_zf7351_backup.bin 4. System will reboot. Quirks and known issues: - Flash layout is changed from the factory, to use both firmware image partitions for storage using mtd-concat, and uImage format is used to actually boot the system, which rules out the dual-boot capability. - Both radio has its own EEPROM on board, not connected to CPU. - The stock firmware has dual-boot capability, which is not supported in OpenWrt by choice. It is controlled by data in the top 64kB of RAM which is unmapped, to avoid the interference in the boot process and accidental switch to the inactive image, although boot script presence in form of "bootcmd" variable should prevent this entirely. - On some versions of stock firmware, it is possible to obtain root shell, however not much is available in terms of debugging facitilies. 1. Login to the rkscli 2. Execute hidden command "Ruckus" 3. Copy and paste ";/bin/sh;" including quotes. This is required only once, the payload will be stored in writable filesystem. 4. Execute hidden command "!v54!". Press Enter leaving empty reply for "What's your chow?" prompt. 5. Busybox shell shall open. Source: https://alephsecurity.com/vulns/aleph-2019014 - There is second method to achieve root shell, using command injection in the web interface: 1. Login to web administration interface 2. Go to Administration > Diagnostics 3. Enter |telnetd${IFS}-p${IFS}204${IFS}-l${IFS}/bin/sh into "ping" field 4. Press "Run test" 5. Telnet to the device IP at port 204 6. Busybox shell shall open. Source: https://github.com/chk-jxcn/ruckusremoteshell Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* odhcpd: bump to latest git HEADChristian Marangi2023-03-221-4/+4
| | | | | | | | | | | 7c0f603 router: skip RA and wait for LINK-LOCAL to be assigned ba30afc config: skip interface setup if interface not IFF_RUNNING 06b111e Revert "odhcpd: Reduce error messages" 90d6cc9 odhcpd: Reduce error messages Also drop AUTORELEASE since it got deprecated. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: qca-ssdk: opt-out of LTORobert Marko2023-03-211-0/+1
| | | | | | | | | SSDK is doing everything custom, so trying to use mold and/or LTO fails, so lets opt-out of using both of them. Signed-off-by: Robert Marko <robimarko@gmail.com> [a.heider: split and switch to PKG_BUILD_FLAGS] Signed-off-by: Andre Heider <a.heider@gmail.com>
* treewide: opt-out of tree-wide LTO usageAndre Heider2023-03-213-1/+4
| | | | | | These fail to build with LTO enabled or packages depending on them do. Signed-off-by: Andre Heider <a.heider@gmail.com>
* treewide: add support for "lto" in PKG_BUILD_FLAGSAndre Heider2023-03-2122-66/+40
| | | | | | | | | | | | | | | | This reduces open coding and allows to easily add a knob to enable it treewide, where chosen packages can still opt-out via "no-lto". Some packages used LTO, but not the linker plugin. This unifies 'em all to attempt to produce better code. Quoting man gcc(1): "This improves the quality of optimization by exposing more code to the link-time optimizer." Also use -flto=auto instead of -flto=jobserver, as it's not guaranteed that every buildsystem uses +$(MAKE) correctly. Signed-off-by: Andre Heider <a.heider@gmail.com>
* treewide: add support for "gc-sections" in PKG_BUILD_FLAGSAndre Heider2023-03-2119-47/+45
| | | | | | | | | | | | | | | This reduces open coding and allows to easily add a knob to enable it treewide, where chosen packages can still opt-out via "no-gc-sections". Note: libnl, mbedtls and opkg only used the CFLAGS part without the LDFLAGS counterpart. That doesn't help at all if the goal is to produce smaller binaries. I consider that an accident, and this fixes it. Note: there are also packages using only the LDFLAGS part. I didn't touch those, as gc might have been disabled via CFLAGS intentionally. Signed-off-by: Andre Heider <a.heider@gmail.com>
* treewide: replace PKG_USE_MIPS16:=0 with PKG_BUILD_FLAGS:=no-mips16Andre Heider2023-03-2118-18/+17
| | | | | | | Keep backwards compatibility via PKG_USE_MIPS16 for now, as this is used in all package feeds. Signed-off-by: Andre Heider <a.heider@gmail.com>
* ipq40xx: add support for Wallystech DR40x9Robert Marko2023-03-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for the Wallys DR40x9 series boards. They come in IPQ4019 and IPQ4029 versions. IPQ4019/4029 only differ in that that IPQ4029 is the industrial version that is rated to higher temperatures. Specifications are: * CPU: Qualcomm IPQ40x9 (4x ARMv7A Cortex A7) at 716 MHz * RAM: 512 MB * Storage: 2MB of SPI-NOR, 128 MB of parallel NAND * USB 3.0 TypeA port for users * MiniPCI-E with PCI-E 2.0 link * MiniPCI-E for LTE modems with only USB2.0 link * 2 SIM card slots that are selected via GPIO11 * MicroSD card slot * Ethernet: 2x GBe with 24~48V passive POE * SFP port (Does not work, I2C and GPIO's not connected on hardware) * DC Jack * UART header * WLAN: In-SoC 2x2 802.11b/g/n and 2x2 802.11a/n/ac * 4x MMCX connectors for WLAN * Reset button * 8x LED-s Installation instructions: Connect to UART, pins are like this: -> 3.3V | TX | RX | GND Settings are 115200 8n1 Boot initramfs from TFTP: tftpboot 0x84000000 openwrt-ipq40xx-generic-wallys_dr40x9-initramfs-fit-uImage.itb bootm Then copy the sysupgrade image to the /tmp folder and execute sysupgrade -n <image_name> The board file binary was provided from Wallystech on March 14th 2023 including full permission to use and distribute. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
* ipq-wifi: bump to latest git HEADKoen Vandeputte2023-03-211-3/+3
| | | | | | f9cece0 ipq40xx: add support for Wallystech DR40x9 Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
* linux-firmware: update to 20230310Nick Hainke2023-03-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: 588dd07 qat: update licence text a03713d rtl_bt: Update RTL8822C BT USB firmware to 0x0CC6_D2E3 63dac62 rtl_bt: Update RTL8822C BT UART firmware to 0x05C6_D2E3 5adebcf WHENCE: remove duplicate File entries d32de23 WHENCE: remove trailing white space 24c9df9 linux-firmware: add fw for qat_4xxx b568bbc Fix symlinks for Intel firmware f49c572 linux-firmware: update firmware for mediatek bluetooth chip (MT7921) db6e357 linux-firmware: update firmware for MT7921 WiFi device 4309412 iwlwifi: update core69 and core72 firmwares for Ty device 4cc3eda rtlwifi: Add firmware v16.0 for RTL8710BU aka RTL8188GU 76ad275 brcm: Add nvram for the Lenovo Yoga Book X90F / X90L convertible 1bc8afb brcm: Fix Xiaomi Inc Mipad2 nvram/.txt file macaddr d02d58a brcm: Add nvram for the Advantech MICA-071 tablet c51488f rtl_bt: Update RTL8852C BT USB firmware to 0xD7B8_FABF 3653d69 rtl_bt: Add firmware and config files for RTL8821CS 7375bcf rtw89: 8852b: update fw to v0.29.29.0 5148670 rtw89: 8852b: update fw to v0.29.26.0 c600840 liquidio: remove lio_23xx_vsw.bin 23afbfe intel: avs: Add AudioDSP base firmware for CNL-based platforms 284e55d intel: avs: Add AudioDSP base firmware for APL-based platforms 289e3a9 intel: avs: Add AudioDSP base firmware for SKL-based platforms c7a57ef ath11k: WCN6855 hw2.0: update to WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 6a4e7f6 ath11k: WCN6855 hw2.0: update board-2.bin 0e2486b ath11k: WCN6750 hw1.0: update board-2.bin f48fbe4 ath11k: IPQ5018 hw1.0: add to WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 9dacec6 ath11k: IPQ5018 hw1.0: add board-2.bin 15054af ath10k: QCA6174 hw3.0: update firmware-sdio-6.bin to version WLAN.RMH.4.4.1-00174 024cc5e ath10k: WCN3990 hw1.0: update board-2.bin a253a37 cnm: update chips&media wave521c firmware. c0a0bc2 amdgpu: Update GC 11.0.1 firmware 4296b7a intel: catpt: Add AudioDSP base firmware for BDW platforms f79e4ba linux-firmware: Update AMD cpu microcode 1fd4c55 brcm: revert firmware files for Cypress devices 5aa0b27 brcm: restore previous firmware file for BCM4329 device c3f3baa rtw88: 8822c: Update normal firmware to v9.9.14 c1181ae i915: Add DMC v2.11 for MTL 2fd61bc linux-firmware: Add firmware for Cirrus CS35L41 on UM3402 ASUS Laptop a60d908 linux-firmware: Add missing tuning files for HP Laptops using Cirrus Amps a5046f4 i915: Add DMC v2.18 for ADLP 5c11a37 amdgpu: Add VCN 4.0.2 firmware 5fe2d73 amdgpu: Add PSP 13.0.4 firmware a3332f8 amdgpu: Add SDMA 6.0.1 fimware 4535de6 amdgpu: Add GC 11.0.1 firmware 2e93e4c amdgpu: Add DCN 3.1.4 firmware 3435843 iwlwifi: remove old intermediate 5.15+ firmwares 494389c iwlwifi: remove 5.10 and 5.15 intermediate old firmwares 177c593 iwlwifi: remove 5.4 and 5.10 intermediate old firmwares fa3a6d5 iwlwifi: remove 4.19 and 5.4 intermediate old firmwares d11eb6f iwlwifi: remove old unsupported older than 4.14 LTS bb2d42d linux-firmware: update firmware for MT7921 WiFi device 3f0f338 linux-firmware: update firmware for mediatek bluetooth chip (MT7921) f88f1f8 amdgpu: update vangogh firmware Signed-off-by: Nick Hainke <vincent@systemli.org>
* ipq807x: add support for Netgear WAX218Alexandru Gagniuc2023-03-202-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netgear WAX218 is a 802.11ax AP claiming AX3600 support. It is wall or ceiling mountable. It can be powered via PoE, or a 12 V adapter. The board has footprints for 2.54mm UART headers. They're difficult to solder because the GND is connected to a large copper plane. Only try soldering if you are very skilled. Otherwise, use pogo pins. Specifications: --------------- * CPU: Qualcomm IPQ8072A Quad core Cortex-A53 2.2GHz * RAM: 366 MB of RAM available to OS, not sure of total amount * Storage: Macronix MX30UF2G18AC 256MB NAND * Ethernet: * 2.5G RJ45 port (QCA8081) with PoE input * WLAN: * 2.4GHz/5GHz with 8 antennas * LEDs: * Power (Amber) * LAN (Blue) * 2G WLAN (Blue) * 5G WLAN (Blue) * Buttons: * 1x Factory reset * Power: 12V DC Jack * UART: Two 4-pin unpopulated headers near the LEDs * "J2 UART" is the CPU UART, 3.3 V level Installation: ============= Web UI method ------------- Flashing OpenWRT using the vendor's Web UI is problematic on this device. The u-boot mechanism for communicating the active rootfs is antiquated and unreliable. Instead of setting the kernel commandline, it relies on patching the DTS partitions of the nand node. The way partitions are patched is incompatible with newer kernels. Newer kernels use the SMEM partition table, which puts "rootfs" on mtd12. The vendor's Web UI will flash to either mtd12 or mtd14. One reliable way to boot from mtd14 and avoid boot loops is to use an initramfs image. 1. In the factory web UI, navigate to System Manager -> Firmware. 2. In the "Local Firmware Upgrade" section, click Browse 3. Navigate and select the 'web-ui-factory.fit' image 4. Click "Upload" 5. On the following page, click on "Proceed" The flash proceeds at this point and the system will reboot automatically to OpenWRT. 6. Flash the 'nand-sysupgrade.bin' using Luci or the commandline SSH method ---------- Enable SSH using the CLI or Web UI. The root account is locked out to ssh, and the admin account defaults to Netgear's CLI application. So we need to get creative: First, make sure the device boots from the second firmware partition: ssh -okexalgorithms=diffie-hellman-group14-sha1 admin@<ipaddr> \ /usr/sbin/fw_setenv active_fw 1 Then reboot the device, and run the update: scp -O -o kexalgorithms=diffie-hellman-group14-sha1 \ -o hostkeyalgorithms=ssh-rsa \ netgear_wax218-squashfs-nand-factory.ubi \ admin@<ipaddr>:/tmp/openwrt.ubi ssh -okexalgorithms=diffie-hellman-group14-sha1 admin@<ipaddr> \ /usr/sbin/ubiformat /dev/mtd12 -f /tmp/openwrt.ubi ssh -okexalgorithms=diffie-hellman-group14-sha1 admin@<ipaddr> \ /usr/sbin/fw_setenv active_fw 0 Now reboot the device, and it should boot into a ready-to-use OpenWRT. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Francisco G Luna <frangonlun@gmail.com>
* mac80211: ath11k: sync with ath-nextRobert Marko2023-03-2011-0/+2637
| | | | | | | | | | | | Synchronize the ath11k backports with the current ath-next tree. This brings in actually setting the MU-MIMO parameters in HW and 6GHz regulatory support along with some minor resource handling fixes. This allows to easily backport further fixes as cherry picking them has started requiring manual conflict resolution. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: mark patches accepted upstreamNick Hainke2023-03-1915-0/+0
| | | | | | Add kernel tags to the patches that got accepted upstream. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ipq-wifi: bump to latest git HEADKristjan Krušič2023-03-191-3/+3
| | | | | | | 31ff96d ipq806x: add support for Nokia Airscale AC400i 1af1df2 ath11k: ipq8074: add Netgear WAX218 Signed-off-by: Kristjan Krušič <kristjan.krusic@krusic22.com>
* ipq806x: add support for Nokia Airscale AC400iKristjan Krušič2023-03-192-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Qualcomm IPQ8065 RAM: 512 MB DDR3 Flash: 256 MB NAND (Macronix MX30UF2G18AC) (split into 2x128MB) 4 MB SPI-NOR (Macronix MX25U3235F) WLAN: Qualcomm Atheros QCA9984 - 2.4Ghz Qualcomm Atheros QCA9984 - 5Ghz ETH: eth0 - POE (100Mbps in U-Boot, 1000Mbps in OpenWrt) eth1 - (1000Mbps in both) Auto-negotiation broken on both. USB: USB 2.0 LED: 5G, 2.4G, ETH1, ETH2, CTRL, PWR (All support green and red) BTN: Reset Other: SD card slot (non-functional) Serial: 115200bps, near the Ethernet transformers, labeled 9X. Connections from the arrow to the 9X text: [NC] - [TXD] - [GND] - [RXD] - [NC] Installation ------------ 0. Connect to the device Plug your computer into LAN2 (1000Mbps connection required). If you use the LAN1/POE port, set your computer to force a 100Mbps link. Connect to the device via TTL (Serial) 115200n8. Locate the header (or solder pads) labeled 9X, near the Ethernet jacks/transformers. There should be an arrow on the other side of the header marking. The connections should go like this: (from the arrow to the 9X text): NC - TXD - GND - RXD - NC 1. Prepare for installation While the AP is powering up, interrupt the startup process. MAKE SURE TO CHECK YOUR CURRENT PARTITION! If you see: "Current Partition is : partB" or "Need to switch partition from partA to partB", you have to force the device into partA mode, before continuing. This can be done by changing the PKRstCnt to 5 and resetting the device. setenv PKRstCnt 5 saveenv reset After you interrupt the startup process again, you should see: Need to switch partition from partB to partA You can now continue to the next step. If you see: "Current Partition is : partA", you can continue to the next step. 2. Prevent partition switching. To prevent the device from switching partitions, we are going to modify the startup command. set bootcmd "setenv PKRstCnt 0; saveenv; bootipq" setenv 3. First boot Now, we have to boot the OpenWrt intifs. The easiest way to do this is by using Tiny PXE. You can also use the normal U-Boot tftp method. Run "bootp" this will get an IP from the DHCP server and possibly the firmware image. If it doesn't download the firmware image, run "tftpboot". Now run "bootm" to run the image. You might see: "ERROR: new format image overwritten - must RESET the board to recover" this means that the image you are trying to load is too big. Use a smaller image for the initial boot. 4. Install OpenWrt from initfs Once you are booted into OpenWrt, transfer the OpenWrt upgrade image and use sysupgrade to install OpenWrt to the device. Signed-off-by: Kristjan Krušič <kristjan.krusic@krusic22.com>
* nftables: update to 1.0.7Nick Hainke2023-03-191-2/+2
| | | | | | | Release Notes: https://marc.info/?l=netfilter-devel&m=167873533214563&w=2 Signed-off-by: Nick Hainke <vincent@systemli.org>
* libnftnl: update to 1.2.5Nick Hainke2023-03-191-3/+3
| | | | | | | | | Upstream switched to "tar.xz". Release Notes: https://www.spinics.net/lists/netfilter/msg61016.html Signed-off-by: Nick Hainke <vincent@systemli.org>
* ipq-wifi: bump to latest git HEADChristian Marangi2023-03-181-2/+2
| | | | | | 86180c4 ath10k-firmware: IPQ4019 hw1.0: Rename variant to ZTE MF18A specific BDF Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq-wifi: bump to latest git HEADChristian Marangi2023-03-181-3/+3
| | | | | | | 1f35a8c ath10k-firmware: IPQ4019 hw1.0: Add variant to Teltonika RUTX10 specific BDF a49672f ath10k-firmware: QCA99X0 hw2.0: Add variant to ZTE MF18A specific BDF Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: tcindex classifier has been retiredJohn Audia2023-03-181-2/+1
| | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/net/sched?h=v5.15.100&id=7c183dc0af472dec33d2c0786a5e356baa8cad19 Signed-off-by: John Audia <therealgraysky@proton.me>
* uencrypt: split common and library-specific codeEneas U de Queiroz2023-03-176-294/+382
| | | | | | | | | | | | | | This splits the code in 4 files: - uencrypt.h - uencrypt.c - main program - uencrypt-openssl.c - OpenSSL/wolfSSL implementation - uencrypt-mbedtls - mbedTLS implementation Other changes, accounting for ~400 bytes increase in ipk size: - more error condition checking and reporting, - hide key and iv command line arguments Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* uencrypt: add support for mbedtlsEneas U de Queiroz2023-03-174-52/+309
| | | | | | | | | | | | | | This commit includes some additional changes: - better handling of iv and keys in openssl/wolfssl variants - fix compiler warnings and whitespace - build all 3 variants as separate packages - adjust the new package name in targets' DEVICE_PACKAGES - remove PKG_FLAGS:=nonshared [Beeline SmartBox Flash - OK] Tested-by: Mikhail Zhilkin <csharper2005@gmail.com> [after test: replaced a hardcoded IV size of 16 by cipher_info->iv_size] Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* ipq-wifi: bump to latest git HEAD and add 8devices boardsMantas Pucka2023-03-171-3/+7
| | | | | | | | | 2dae618 ipq-wifi: update 8devices Jalapeno BDF 08e92db ipq-wifi: update 8devices Habanero BDF Signed-off-by: Mantas Pucka <mantas@8devices.com> [ split ipq40xx changes in separate commit ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 18:35:57 +0000