aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: backport support for BSS color changesFelix Fietkau2021-09-253-16/+1025
| | | | | | This is needed for an upcoming mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix segfault when deinit mesh ifacesJesus Fernandez Manzano2021-09-241-0/+5
| | | | | | | | | | | In hostapd_ubus_add_bss(), ubus objects are not registered for mesh interfaces. This provokes a segfault when accessing the ubus object in mesh deinit. This commit adds the same condition to hostapd_ubus_free_bss() for discarding those mesh interfaces. Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
* base-files: reduce number of `mkdir` callsPaul Spooren2021-09-231-17/+19
| | | | | | | | | | | | | The `mkdir` commands supports passing multiple arguments to batch create multiple folders, instead of calling the tool every single time. If the creation of one of the folders fails, all other folder are still created and therefore doesn't change the error handling. Also stop creating `/etc/` explicitly after subfolders of `/etc/` were already created. Signed-off-by: Paul Spooren <mail@aparcar.org>
* base-files: reduce `sed` callsPaul Spooren2021-09-231-4/+2
| | | | | | | | | The `sed`-script shouldn't be called multiple times, especially not with the same files. This commit merges all files together in a single `sed`-script call. Signed-off-by: Paul Spooren <mail@aparcar.org>
* restool: add back PKG_VERSIONRosen Penev2021-09-231-1/+2
| | | | | | | | | | | | | For some reason, the build system chops off the last number from the version, which is not correct. Add it back. Update hash. Fixes: 96c7164acd80 ("restool: update to LSDK-20.12") Signed-off-by: Rosen Penev <rosenp@gmail.com> [add Fixes] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq-wifi: Work around Plasma Cloud PA1200 5GHz crashSven Eckelmann2021-09-231-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was noticed [1] that the ath10k firmware crashes on 5GHz since OpenWrt 21.02.0. The problem seems to be triggered by the the nonLinearTxFir field in the 5GHz BDF. If baseEepHeader.nonLinearTxFir (offset 0xc2) is 1 then the firmware just crashes when setting up the 5Ghz radio using `ifconfig wlan1 up`: ath10k_ahb a800000.wifi: firmware crashed! (guid 9e36ee82-4d2c-4c63-b20b-609a1eaca30c) ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000 ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 ath10k_ahb a800000.wifi: firmware ver 10.4-3.6-00140 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 ba79b746 ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 5f400efc ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1 ath10k_ahb a800000.wifi: firmware register dump: ath10k_ahb a800000.wifi: [00]: 0x0000000B 0x000015B3 0x009C3C27 0x00975B31 ath10k_ahb a800000.wifi: [04]: 0x009C3C27 0x00060530 0x00000018 0x004176B8 ath10k_ahb a800000.wifi: [08]: 0x00405A50 0x00412A30 0x00000000 0x00000000 ath10k_ahb a800000.wifi: [12]: 0x00000009 0x00000000 0x009B9742 0x009B974F ath10k_ahb a800000.wifi: [16]: 0x00971238 0x009B9742 0x00000000 0x00000000 ath10k_ahb a800000.wifi: [20]: 0x409C3C27 0x004053DC 0x00000D2C 0x00405A60 ath10k_ahb a800000.wifi: [24]: 0x809C3E13 0x0040543C 0x00000000 0xC09C3C27 ath10k_ahb a800000.wifi: [28]: 0x809B9AC5 0x0040547C 0x00412A30 0x0040549C ath10k_ahb a800000.wifi: [32]: 0x809B8ECD 0x0040549C 0x00000001 0x00412A30 ath10k_ahb a800000.wifi: [36]: 0x809B8FF3 0x004054CC 0x00412838 0x00000014 ath10k_ahb a800000.wifi: [40]: 0x809BEF98 0x0040551C 0x0041627C 0x00000002 ath10k_ahb a800000.wifi: [44]: 0x80986D47 0x0040553C 0x0041627C 0x00416A88 ath10k_ahb a800000.wifi: [48]: 0x809CBB0A 0x0040559C 0x0041ACC0 0x00000000 ath10k_ahb a800000.wifi: [52]: 0x809864EE 0x0040560C 0x0041ACC0 0x00000001 ath10k_ahb a800000.wifi: [56]: 0x809CA8A4 0x0040564C 0x0041ACC0 0x00000001 ath10k_ahb a800000.wifi: Copy Engine register dump: ath10k_ahb a800000.wifi: [00]: 0x0004a000 14 14 3 3 ath10k_ahb a800000.wifi: [01]: 0x0004a400 16 16 22 23 ath10k_ahb a800000.wifi: [02]: 0x0004a800 3 3 2 3 ath10k_ahb a800000.wifi: [03]: 0x0004ac00 15 15 15 15 ath10k_ahb a800000.wifi: [04]: 0x0004b000 4 4 44 4 ath10k_ahb a800000.wifi: [05]: 0x0004b400 3 3 2 3 ath10k_ahb a800000.wifi: [06]: 0x0004b800 1 1 1 1 ath10k_ahb a800000.wifi: [07]: 0x0004bc00 1 1 1 1 ath10k_ahb a800000.wifi: [08]: 0x0004c000 0 0 127 0 ath10k_ahb a800000.wifi: [09]: 0x0004c400 0 0 0 0 ath10k_ahb a800000.wifi: [10]: 0x0004c800 0 0 0 0 ath10k_ahb a800000.wifi: [11]: 0x0004cc00 0 0 0 0 ath10k_ahb a800000.wifi: failed to update channel list: -108 ath10k_ahb a800000.wifi: failed to set pdev regdomain: -108 ath10k_ahb a800000.wifi: failed to create WMI vdev 0: -108 ieee80211 phy1: Hardware restart was requested Since no actual solution is known (besides downgrading the ath10k firmware) it seems to be better to disable the nonLinearTxFir for now. [1] https://lore.kernel.org/ath10k/3423718.UToCqzeSYe@ripper/ Signed-off-by: Sven Eckelmann <sven@narfation.org>
* ipq-wifi: Update Plasma Cloud PA1200 BDFs to firmware 3.5.12Sven Eckelmann2021-09-231-0/+0
| | | | | | | | The official Plasma Cloud firmware adjusted the BDFs to contain new conformance test limits and target power values. These should be imported to avoid emissions outside the allowed limits. Signed-off-by: Sven Eckelmann <sven@narfation.org>
* fstools: ensure filesystems are mounted before log service startsTimo Sigurdsson2021-09-221-2/+4
| | | | | | | | | | | | Currently, the fstab service starts after the log service which breaks the ability to write a persistent log file to a filesystem mounted by the fstab service. Thus, change the start order of the fstab service so it starts right before the log service. Fixes: b131853 ("ubox: update to latest git revision") Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> [set to 11 to be explicitly before log, not only alphabetically, SPDX] Signed-off-by: Paul Spooren <mail@aparcar.org>
* mac80211: Update to backports-5.10.68Hauke Mehrtens2021-09-2252-259/+131
| | | | | | | | | | | | | | | | | | Refresh all patches. The removed patches were integrated upstream. This contains fixes for CVE-2020-3702 1. These patches (ath, ath9k, mac80211) were included in kernel versions since 4.14.245 and 4.19.205. They fix security vulnerability CVE-2020-3702 [1] similar to KrØØk, which was found by ESET [2]. Thank you Josef Schlehofer for reporting this problem. [1] https://nvd.nist.gov/vuln/detail/CVE-2020-3702 [2] https://www.welivesecurity.com/2020/08/06/beyond-kr00k-even-more-wifi-chips-vulnerable-eavesdropping/ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bpftools: fix compilation with musl 1.2.xRosen Penev2021-09-221-0/+20
| | | | | | | | A definition for __maybe_inline is needed. Refreshed patches. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tfp-layerscape: update to LSDK-20.12Rosen Penev2021-09-213-10/+23
| | | | | | | | | | Fixes compilation with GCC11. Kept PKG_VERSION as there's some bug that chops off the 12 at the end. Refreshed other patch. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* restool: update to LSDK-20.12Rosen Penev2021-09-213-369/+2
| | | | | | | | | | | | Fixes compilation with both GCC 10 and 11. Switched to AUTORELEASE for simplicity. Removed PKG_VERSION as it's derived from PKG_SOURCE_VERSION. Removed all patches as they are upstream backports. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* 6rd: delete tunnel on interface teardownDavid Lam2021-09-222-1/+3
| | | | | | | | | | | | Delete tunnel on 6rd interface teardown. Should solve problem related to tunnel stuck on restart loop with "Unknown Command" on tunnel restart due to wan connection drop. This patch is similar to the one written by Ansuel on Aug 2, 2021 but the 6rd teardown produces the same symptoms when the network service is restarted. Signed-off-by: David Lam <david@thedavid.net>
* restool: fix compilation with GCC 10Kuan-Yi Li2021-09-213-10/+269
| | | | | | | | | GCC 10 defaults to `-fno-common` and complains about multiple definition of `mc_status` in restool. Backport a patch from upstream to fix compilation with host GCC 10. Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
* hostapd: let netifd set bridge port attributes for snoopingFelix Fietkau2021-09-211-1/+30
| | | | | | Avoids race conditions on bridge member add/remove Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ustp: update to the latest versionFelix Fietkau2021-09-211-3/+3
| | | | | | | | c62d85cf7a0d bridge: check port bpdu filter status and apply it to the config 25555611be91 libnetlink: turn rtnetlink error answers into debug msgs 462b3a491347 build: use pthread cflags/ldflags Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2021-09-211-3/+3
| | | | | | | | | | | | d590fbd255ce wireless: always enable bpdu filter for AP interfaces and VLANs f8ff6d820283 system-linux: remove copy&paste from /proc and /sys path names 300b1220fab3 wireless: improve reliability of proxyarp support 5ba9744aac6d device: add support for configuring bonding devices 6fa9b042ff4d wireless: only apply wireless device attributes to the base vif interface 06d11bbf1f2b wireless: only enable proxyarp/isolate for AP vifs 08e954e137ff bonding: claim the port device before creating the bonding device Signed-off-by: Felix Fietkau <nbd@nbd.name>
* arm-trusted-firmware-mvebu: Add hash for aarch64 cm3-gccHauke Mehrtens2021-09-201-0/+4
| | | | | | | | This adds the hash also for the aarch64 toolchain in addition to the x86_64 toolchain. This gets the build on a Linux aarch64 host one step further. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* iproute2: update to 5.14Hans Dedecker2021-09-1810-17/+17
| | | | | | | | Update iproute2 to latest stable 5.14; for the changes see https://lwn.net/Articles/867940/ Refresh patches Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* procd: update to git HEADDaniel Golle2021-09-151-3/+3
| | | | | | | | | | | | 8a60e7e trace: don't leak file descriptor in error path 68df9ac procd: fix container deletion f16abe0 uxc: add JSON output option for 'list' command a23c888 jail: prepare for adding process to existing namespace 50da8a4 instance: allow jailed service to join namespace(s) 482d1ab Revert "jail: do not hack /etc/resolv.conf on container rootfs" 1eb4371 jail: start ubus and netifd instances for container with netns Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mvebu: CZ.NIC's Secure Firmware bump to v2021.09.07sean lee2021-09-154-168/+2
| | | | | | | | | | | | | | | | | bump version and remove patches that have been applied 176d701 wtmi: Wait 1s after putting PHYs INTn pin low 2eeccfe wtmi: Change comment describing reset workaround e8c94a5 wtmi: Count RAM size from both CS0 and CS1 995979e wtmi: Rename macro e29eb29 wtmi: soc: Fix start_ap_workaround() for TF-A with debug 81245ed wtmi: Use constant name PLAT_MARVELL_MAILBOX_BASE 18ccb83 wtmi: Do a proper UART reset with clock change as described in spec 15ff106 avs: Validate VDD value from OTP 3f33626 fix: clock: a3700: change pwm clock for 600/600 and 1200/750 preset fb5e436 wtmi: uart: fix UART baudrate divisor calculation Signed-off-by: sean lee <ilf@live.com>
* dnsmasq: add config option for connmark DNS filteringEtan Kissling2021-09-141-0/+12
| | | | | | | | | This adds uci support to configure connmark based DNS filtering. Signed-off-by: Etan Kissling <etan_kissling@apple.com> (imported from upstream mailing list https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2021q2/015151.html) Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
* dnsmasq: Update to version 2.86Etan Kissling2021-09-142-5/+5
| | | | | | | | | | | | | | | | | | | | | Summary of upstream CHANGELOG: * Handle DHCPREBIND requests in the DHCPv6 server code. * Fix bug which caused dnsmasq to lose track of processes forked. * Major rewrite of the DNS server and domain handling code. * Revise resource handling for number of concurrent DNS queries. * Improve efficiency of DNSSEC. * Connection track mark based DNS query filtering. * Allow smaller than 64 prefix lengths in synth-domain. * Make domains generated by --synth-domain appear in replies when in authoritative mode. * Ensure CAP_NET_ADMIN capability is available when conntrack is configured. * When --dhcp-hostsfile --dhcp-optsfile and --addn-hosts are given a directory as argument, define the order in which files within that directory are read. * Support some wildcard matching of input tags to --tag-if. Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
* wolfssl: update to 4.8.1-stableIvan Pavlov2021-09-134-18/+11
| | | | | | | | | | | Changes from 4.7.0: Fix one high (OCSP verification issue) and two low vulnerabilities Improve compatibility layer Other improvements and fixes For detailed changes refer to https://github.com/wolfSSL/wolfssl/releases Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
* realtek: add ZyXEL GS1900-24HPv2 supportSoma Zambelly2021-09-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-24HPv2 is a 24 port PoE switch with two SFP ports, similar to the other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-24HPv2 * SoC: Realtek RTL8382M 500 MHz MIPS 4KEc * Flash: 16 MiB * RAM: W631GG8MB-12 128 MiB DDR3 SDRAM (stock firmware is configured to use only 64 MiB) * Ethernet: 24x 10/100/1000 Mbps, 2x SFP 100/1000 Mbps * LEDs: 1 PWR LED (green, not configurable) 1 SYS LED (green, configurable) 24 ethernet port link/activity LEDs (green, SoC controlled) 24 ethernet port PoE status LEDs 2 SFP status/activity LEDs (green, SoC controlled) * Buttons: 1 "RESTORE" button on front panel 1 "RESET" button on front panel * Power 120-240V AC C13 * UART: 1 serial header (J41) with populated standard pin connector on the left edge of the PCB, angled towards the side. The casing has a rectangular cutout on the side that provides external access to these pins. Pinout (front to back): + GND + TX + RX + VCC Serial connection parameters for both devices: 115200 8N1. Installation ------------ OEM upgrade method: (Possible on master once https://patchwork.ozlabs.org/project/openwrt/patch/20210624210408.19248-1-bjorn@mork.no/ is merged) * Log in to OEM management web interface * Navigate to Maintenance > Firmware > Management * If "Active Image" has the first option selected, OpenWrt will need to be flashed to the "Active" partition. If the second option is selected, OpenWrt will need to be flashed to the "Backup" partition. * Navigate to Maintenance > Firmware > Upload * Upload the openwrt-realtek-generic-zyxel_gs1900-24hp-v2-initramfs-kernel.bin file by your preferred method to the previously determined partition. When prompted, select to boot from the newly flashed image, and reboot the switch. * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade -n /tmp/openwrt-realtek-generic-zyxel_gs1900-24hp-v2-squashfs-sysupgrade.bin it may be necessary to restart the network (/etc/init.d/network restart) on the running initramfs image. U-Boot TFTP method: * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-24HPv2 is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot from the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-24hp-v2-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade -n /tmp/openwrt-realtek-generic-zyxel_gs1900-24hp-v2-squashfs-sysupgrade.bin it may be necessary to restart the network (/etc/init.d/network restart) on the running initramfs image. Signed-off-by: Soma Zambelly <zambelly.soma@gmail.com>
* kernel: add package kmod-iio-ads1015 and remove kmod-hwmon-ads1015Christian Pointner2021-09-132-14/+15
| | | | | | | | | | | | The hwmon driver for the ADC ADS1015 has been removed in Linux 5.4 in favor of a driver in the iio system. For details see: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2c9d5b5e This fixes: https://bugs.openwrt.org/index.php?do=details&task_id=4005 Run-tested: ramips/mt76x8 (Onion Omega 2+) Signed-off-by: Christian Pointner <equinox@spreadspace.org>
* ipq-wifi: Drop empty wifi package for Netgear WAC510Sven Eckelmann2021-09-121-2/+0
| | | | | | | | | | The ipq-wifi-netgear_wac510 package is not selected by any device and would be empty anyway. The default board-2.bin from ath10k-board-qca4019 is therefore used for this device and the package doesn't provide any visible features. Fixes: b126d9c3a3d3 ("ipq40xx: add netgear wac510 support") Signed-off-by: Sven Eckelmann <sven@narfation.org>
* iproute2: m_xt.so depends on dynsyms.listRoman Yeryomin2021-09-091-1/+2
| | | | | | | | | | | | | | | | | | When doing parallel build on a fast machine with bottleneck in i/o, m_xt.so may start linking faster than dynsyms.list gets populated, resulting in error: ld:dynsyms.list:0: syntax error in dynamic list Fix this by adding dynsyms.list as make dependency to m_xt.so Described also here: https://bugs.openwrt.org/index.php?do=details&task_id=3353 Change from v1: - add dynsysms.list dependancy only when shared libs are enabled Signed-off-by: Roman Yeryomin <roman@advem.lv> Fixes: FS#3353
* mac80211: revert faulty change that was breaking broadcast txFelix Fietkau2021-09-061-13/+2
| | | | | Fixes: 0f6887972adc ("mac80211: add missing change for encap offload on devices with sw rate control") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: add support for Sitecom WLR-4100 v1 002Andrea Poletti2021-09-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sitecom WLR-4100 v1 002 (marked as X4 N300) is a wireless router Specification: SoC: MT7620A RAM: 64 MB DDR2 Flash: MX25L6405D SPI NOR 8 MB WIFI: 2.4 GHz integrated Ethernet: 5x 10/100/1000 Mbps QCA8337 USB: 1x 2.0 LEDS: 2x GPIO controlled, 5x switch Buttons: 1x GPIO controlled UART: row of 4 unpopulated holes near USB port, starting count from white triangle on PCB: VCC 3.3V GND TX RX baud: 115200, parity: none, flow control: none Installation Connect to one of LAN (yellow) ethernet ports, Open router configuration interface, Go to Toolbox > Firmware, Browse for OpenWrt factory image with dlf extension and hit Apply, Wait few minutes, after the Power LED will stop blinking, the router is ready for configuration. Known issues Some USB 2.0 devices work at full speed mode 1.1 only MAC addresses factory partition only contains one (binary) MAC address in 0x4. u-boot-env contains four (ascii) MAC addresses, of which two appear to be valid. factory 0x4 **:**:**:**:b9:84 binary u-boot-env ethaddr **:**:**:**:b9:84 ascii u-boot-env wanaddr **:**:**:**:b9:85 ascii u-boot-env wlanaddr 00:AA:BB:CC:DD:12 ascii u-boot-env iNICaddr 00:AA:BB:CC:DD:22 ascii The factory firmware only assigns ethaddr. Thus, we take the binary value which we can use directly in DTS. Additional information OEM firmware shell password is: SitecomSenao useful for creating backup of original firmware. There is also another revision of this device (v1 001), based on RT3352 SoC Signed-off-by: Andrea Poletti <polex73@yahoo.it> [remove config DT label, convert to nvmem, remove MAC address setup from u-boot-env, add MAC address info to commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* busybox: update to version 1.34.0Hannu Nyman2021-09-0417-203/+223
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update busybox to version 1.34.0 * Remove upstreamed patches (205, 530, 540) * Remove one old patch that does not apply any more. (203) That was originally introduced in 2008 with 563d23459, but does not apply after busybox restructuring with https://git.busybox.net/busybox/commit/networking/udhcp/dhcpc.c?h=1_34_stable&id=e6007c4911c3ea26925f9473b9f156a692585f30 and https://git.busybox.net/busybox/commit/networking/udhcp/dhcpc.c?h=1_34_stable&id=1c7253726fcbab09917f143f0b703efbd2df55c3 * Refresh config and patches. * Backport upstream fixes for - MIPS compilation breakage and - process substitution regression Config refresh: Refresh commands, run after busybox is first built once: cd utils/busybox/ cd config/ ../convert_menuconfig.pl ../../../../build_dir/target-aarch64_cortex-a53_musl/busybox-default/busybox-1.34.0 cd .. ./convert_defaults.pl < ../../../build_dir/target-aarch64_cortex-a53_musl/busybox-default/busybox-1.34.0/.config > Config-defaults.in Manual edits needed afterward: * Config-defaults.in: OpenWrt config symbol IPV6 logic applied to BUSYBOX_DEFAULT_FEATURE_IPV6 * Config-defaults.in: OpenWrt configTARGET_bcm53xx logic applied to BUSYBOX_DEFAULT_TRUNCATE (commit 547f1ec) * Config-defaults.in: OpenWrt logic applied to BUSYBOX_DEFAULT_LOGIN_SESSION_AS_CHILD (commit dc92917) BUSYBOX_DEFAULT_UDHCPC_DEFAULT_INTERFACE (just "") * config/editors/Config.in: Add USE_GLIBC dependency to BUSYBOX_CONFIG_FEATURE_VI_REGEX_SEARCH (commit f141090) * config/shell/Config.in : change at "Options common to all shells" the symbol SHELL_ASH --> BUSYBOX_CONFIG_SHELL_ASH (discussion in http://lists.openwrt.org/pipermail/openwrt-devel/2021-January/033140.html Apparently our script does not see the hidden option while prepending config options with "BUSYBOX_CONFIG_" which leads to a missed dependency when the options are later evaluated.) * Edit Config.in files by adding quotes to sourced items in config/Config.in, config/networking/Config.in and config/util-linux/Config.in (commit 1da014f) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* ucode: update to latest Git HEADJo-Philipp Wich2021-09-011-9/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 929c862 vm: fix toplevel function call protocol 8f34d70 fs: fix chown() and rename() error return values 03ca445 tests: disable fuzz tests for now 3b1be3d types: mark further GC roots d49af4e types: fix comparison of differently signed integers c79ff39 types: handle conversion errors when dealing with negative error indexes 3315b1f types: allow negative array indexes d5b25f9 treewide: harmonize function naming cc4ce8d module: remove unused defines f5d7526 examples: add libucode usage examples 559eff2 types, vm: adjust GC api e5e7e62 treewide: move header files into dedicated directory ff6168a build: install header files 7e6ce0f main: introduce new flag `-x` to allow disabling specific functions b1817b3 vm: fix invalid memory access on GC'ing uninitialized VM context 498fe87 main: refactor option parsing and VM setup ff52440 treewide: consolidate typedef naming 1d60418 vm: add API to control trace mode 48f33ad vm: make root exception handler configurable 0f69f09 vm: fix invalid memory access on toplevel function calls 6bcc318 vm: fix handling exceptions in top-level function calls 4ae0568 lib, vm: reimplement exit() as exception type 2f77657 vm: extend API to allow returning result value from VM execution 111645a vm: remove module preloading logic 38ff6de main: preload modules ourselves d5bc223 vm: add uc_vm_invoke() helper ef0baf1 vm: cosmetic fix for outputting exceptions without source context b11a2fa vm: move global scope allocation into uc_vm_init() 900b2a3 vm: add getter and setter for vm globals scope 0179576 lib: rename uc_add_proto_functions() to uc_add_functions() 98b9c84 lib: expose stdlib function array 1adfba0 treewide: eliminate dead code and unused functions 3974e71 treewide: replace a number of unnecessary type casts bf85226 treewide: move ressource type registry into vm instance e2b3d2e build: split into libucode and ucode cli dad8f3a types: properly deal with circular data in GC mark phase 62dbd64 lexer: rename UT_ prefixed constants to UC_ bc8e465 types: fix wrong assert() on tearing down object trees 853b9f1 vm: fix potential invalid memory access in uc_vm_get_error_context() 6f05cdd lib: fix refcount imbalance in uc_require_path() 96f140b lib, vm: ensure that require() compiles modules only once df5db5f compiler: don't segfault on invalid declaration expressions a97c7a1 lexer: transition into EOF state on unrecognized character 2a838d1 compiler: improve mapping of binary operator tokens to instructions 9872f65 vm: add support for I_LE and I_GE instructions 4e410c3 treewide: let uc_cmp() use instruction instead of token numbers ce6081d lexer, vm: reorder token and instruction numbers 234a4f6 lib: implement b64enc() and b64dec() functions 856a0c0 lib: only consider context of calling function for callbacks 86fb130 lib: implement min() and max() functions 3e893e6 lib: pass-through "this" context to library function callbacks 42de7ab lib: implement `sourcepath()` function 05c80a7 lib: fix negative uc_index() return value on 32bit systems 9874562 lexer: implement raw code mode 3b665c8 lexer: drop value union from keyword table 44354cf lexer, compiler: separate TK_BOOL token into TK_TRUE and TK_FALSE tokens 5879bdf syntax: drop Infinity and NaN keywords d4edadc lib: rename uc_lib_init() to uc_load_stdlib() d81bad7 main, lib: move allocation of globals object into lib function c4f4b38 main: simplify REQUIRE_SEARCH_PATH initialization 54ca3aa types: fix uninitialized memory on setting non-contiguous array indexes cbc0d78 build: let require search patch default to CMAKE_INSTALL_PREFIX 5714705 syntax: introduce `const` support ed32c42 compiler, lexer: add NO_LEGACY define to disable legacy syntax features ff6811f syntax: implement `delete` as proper operator 5803d86 lib: implement wildcard() function dfb7379 fs: implement chmod(), chown(), rename() and glob() functions 1ddf5b6 lexer: skip interpreter line in any source buffer 9951a00 build: lower minimum required CMake version to v3.13 7b81ab2 main: expose argv as global ARGV array to ucode scripts 7283a70 tests: rename misnamed testcases for consistency 3f80116 compiler: fix local for-loop initializer variable declarations f20b56f compiler: properly parse slashes in parenthesized division expressions 5c4e1ea lib: implement regexp(), a function to construct regexp instances at runtime e546bba lib: implement render(), an include variant capturing output in a string 0cb10c6 vm: implement mechanism to change output file descriptor eb8a64d lib: fix uc_sort() f1ffc9f vm: truncate long values after 60 chars in trace output 850612f compiler: properly handle break/continue in nested scopes f0a9875 compiler: properly handle keyword in parenthesized property access expression 1660433 compiler: fix stack mismatch on compiling `use strict` statements a36e0df syntax: implement support for 'use strict' pragma 827a34a vm, compiler: get rid of unused struct members 594cdf3 lib: implement assert() c4d1648 lib: add support for pretty printing JSON to printf() and sprintf() f2eaea3 lib: gracefully handle truncated format strings in uc_printf_common() 02629b8 lexer: fix infinite loop on parsing unterminated comments 2bc9bac lexer: fix infinite loop on parsing unterminated expression blocks f73e201 lexer: fix infinite loop when parsing regexp literal at EOF 86b4863 compiler: fix segfault on parsing invalid pre/post increment expressions 0e24509 lib: fix reporting source context lines at EOF e66b2ad compiler, lexer: improve lexical state handling e29b574 lib: fix uc_split() quirks 64eec7f treewide: ISO C / pedantic compliance 4af803d build: output error messages on test failures 9ef693e vm: improve context for early errors 6def9fc tests: pass ucode library path through environment d5dd183 treewide: address various sign-compare warnings 28825ac types: support creating ressource values without associated type 9c5106a types: fix potential memory leaks and null pointer accesses c51934a types: fix potential leak of key in ucv_object_add() 7b28727 main: fix ineffective EOF check in parse() 4cf897c lib: uc_system(): fix invalid free() of non-heap memory 35af4ba treewide: rework internal data type system f2c4b79 treewide: fix issues reported by clang code analyzer 93ededb tests: allow executing run_tests.sh from any directory 0e4a387 Add initial GitLab and GitHub CI support df73b25 tests: add more tests 41d33d0 tests: custom: return exit code if tests fails 1c548a6 cmake: do not output binaries into lib directory 2b59097 tests: create custom tests from current tests cases 8039361 main: provide just binary name in help output 778e4f7 lexer: fix incomplete struct initializers 502ecdc cmake: enable extra compiler checks 3c2aeff cmake: fix includes and libraries 617a114 cmake: make 3.0 minimum version f360350 lib: implement sleep(ms) function 7f0ff91 lib: allow parsing non-array, non-object value in json() Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* firewall4: update to latest Git HEADJo-Philipp Wich2021-09-011-3/+3
| | | | | | | cf835ce treewide: convert deprecated syntax c9a3bf5 tests: adapt to latest ucode Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ethtool: fix recursive dependencyEneas U de Queiroz2021-08-311-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the CONFLICTS definition from the alternative package (ethtool-full) to the main one. The CONFLICTS line creates a dependency to the conflicting package. Right now, the dependency would be created in the PACKAGE_ethtool-full symbol: config PACKAGE_ethtool-full depends on m || (PACKAGE_ethtool != y) When the main package is selected by airmon-ng, it selects PACKAGE_ethtool, *depending* on the value of PACKAGE_ethtool-full: config PACKAGE_airmon-ng select PACKAGE_ethtool if PACKAGE_ethtool-full<PACKAGE_airmon-ng In the first block, the value of PACKAGE_ethtool-full depends on the value of PACKAGE_ethtool. In the second block, the opposite is true: the value of PACKAGE_ethtool depends on the value of PACKAGE_ethtool-full. This is a recursive dependency. Fix it by changing the package where the dependency is created, so that only the value of PACKAGE_ethtool will depend on PACKAGE_ethtool-full. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* procd: fix issue mounting overlay fsDaniel Golle2021-08-311-2/+2
| | | | | | | | | | | | The previous procd update broke mounting overlayfs in an attempt to fix an off-by-one error. Revert that broken fix and apply fix from Nick Hainke <vincent@systemli.org> instead to bring things back to life. 20adf53 Revert "initd: fix off-by-one error in mkdev.c" 773e8da initd: fix off-by-one error in mkdev.c Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libjson-c: remove old math patchRosen Penev2021-08-302-45/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove old math patch meant for old GCC versions. It's not needed for GCC and causes issues with clang. Add CMake patch to identify clang properly and apply the proper flags. Fixes the following warnings/errors: json_pointer.c:230:7: warning: implicit declaration of function 'vasprintf' is invalid in C99 [-Wimplicit-function-declaration] rc = vasprintf(&path_copy, path_fmt, args); ^ json_pointer.c:317:7: warning: implicit declaration of function 'vasprintf' is invalid in C99 [-Wimplicit-function-declaration] rc = vasprintf(&path_copy, path_fmt, args); ^ /usr/include/bits/mathcalls.h:177:23: error: cannot redeclare builtin function '__builtin_isinf' __MATHDECL_ALIAS (int,isinf,, (_Mdouble_ __value), isinf) ^ /usr/include/bits/mathcalls.h:177:23: note: '__builtin_isinf' is a builtin with type 'int ()' /usr/include/bits/mathcalls.h:213:23: error: cannot redeclare builtin function '__builtin_isnan' __MATHDECL_ALIAS (int,isnan,, (_Mdouble_ __value), isnan) The clang patch is an upstream backport. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* procd: update to git HEADDaniel Golle2021-08-311-3/+3
| | | | | | | | | | 96d8bf2 trace: fix potential use-after-free occurence 8eb1d78 initd: fix off-by-one error in mkdev.c 86f82f3 utils: don't ignore open() return value f5fe04b jail: actually check calloc return value 269c9e4 trace: preload: avoid NULL-dereference here as well Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to git HEADDaniel Golle2021-08-301-3/+3
| | | | | | | df251c2 uxc: move mountpoint of persistent config to /var/run/uxc e5b38fd trace: free memory allocated by blobmsg_format_json_indent() Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* wireguard-tools: bump to 20210424Kevin Darbyshire-Bryant2021-08-301-3/+3
| | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* hostapd: enable proxy-arp support for hostapd-fullDavid Bauer2021-08-283-0/+9
| | | | | | | | | | The hostapd.sh script already has support for configuring proxy-ARP, however no built variant has support for it enabled. Enable proxy-ARP support for hostapd-full builds in order to allow users to actually use this feature. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: fix Proxy-ARP with Hotspot 2.0 disabledDavid Bauer2021-08-281-0/+51
| | | | | | | | | | | The disable_dgaf config fiels is only available in case Hostapd is compiled with Hotspot 2.0 support, however Proxy-ARP does not depend on Hotspot 2.0. Only add the code related to this config field when Hotspot 2.0 is enabled to fix compilation with the aformentioned preconditions. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: refresh patchesDavid Bauer2021-08-286-12/+12
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* openssl: bump to 1.1.1lEneas U de Queiroz2021-08-262-5/+4
| | | | | | | | | | | This version fixes two vulnerabilities: - SM2 Decryption Buffer Overflow (CVE-2021-3711) Severity: High - Read buffer overruns processing ASN.1 strings (CVE-2021-3712) Severity: Medium Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* ath9k: owl-loader: remove obsolete AR71XX patchChristian Lamparter2021-08-261-53/+0
| | | | | | | this is no longer necessary as the AR71XX target was superseded by ath79. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* gpio-button-hotplug: convert to gpio descriptor (gpiod_) APIChristian Lamparter2021-08-261-79/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OpenWrt's special gpio-button-hotplug driver is still using exclusively the legacy GPIO Subsystem gpio_ API. While it still does work fine for most devices, upstream linux is starting to convert platform support like that of the APU2/3/4 to the new GPIOD LOOKUP tables that are not supported by it. Hence, this patch replaces the gpio_ calls present in gpio-button-hotplug with gpiod_ equivalent wherever it's possible. This allows the driver to use the gpiod lookup tables and still have a fallback for legacy platform data code that just sets button->gpio set to the real button/switch GPIO. As a bonus: the active_low logic is now being handled by the linux's gpio subsystem too. Another issue that was address is the of_handle leak in the dt parser error path. Tested with legacy platform data: x86_64: APU2, MX-100 Tested on OF: ATH79; MR18, APM821xx: Netgear WNDR4700, RAMIPS: WL-330N3G LANTIQ: AVM FritzBox 7360v1 Reported-by: Chris Blake <chrisrblake93@gmail.com> Tested-by: Chris Blake <chrisrblake93@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ustp: add OpenWrt STP/RSTP daemonFelix Fietkau2021-08-262-0/+55
| | | | | | | | | This integrates with netifd in order to provide STP/RSTP protocol support in user space. It defaults to using RSTP for bridges with stp enabled. This daemon has no config files, it uses the configuration passed from netifd via ubus Signed-off-by: Felix Fietkau <nbd@nbd.name>
* fstools: update to git HEADDaniel Golle2021-08-251-3/+3
| | | | | | | 50e6b20 libfstools: handle open() return value properly in F2FS check e1b6811 blockd: include missing libubox/utils.h Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to git HEADDaniel Golle2021-08-241-3/+3
| | | | | | | | | | | | | | | | 8a8306d uxc.c: fix coverity resource leak warning 7f2398e jail: devices: create parent folder when creating devices 0603c8d jail: return to hook callback instead of just calling it 3edb7eb jail: check return value when opening console af048a3 jail: use portable sizeof(void *) 6010bd3 utils: make sure read() string is 0 terminated f6daca3 uxc: free string returned by blobmsg_format_json_indent() 51f1cd2 trace: free string returned by blobmsg_format_json_indent() d716cb5 trace: handle open() return value and make sure string is terminated b824a89 jail: preload: avoid NULL-dereference in case things go wrong 167dc24 jail: protect against strcat buffer overflows Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* netifd: update to the latest versionFelix Fietkau2021-08-241-3/+3
| | | | | | | | | | 94170ae24bc9 device: extend device settings flags to 64 bit 1eb0fafaa986 device: add support for configuring device link speed/duplex ed84473b7af9 bridge: memset bst->config by default to avoid stale config values 6519cf31e4b0 bridge: add support for an external STP daemon 454e9c33c906 bridge: tune default stp parameters Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libubox: update to the latest versionFelix Fietkau2021-08-241-3/+3
| | | | | | d716ac4bc423 list.h: add a few missing iterator macros Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 17:31:06 +0000