aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* uboot-kirkwood: fix malformed boot configurationAlberto Bursi2018-06-268-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With current uboot default configuration the bootloader will fail to start the OpenWrt firmware with the following error: ----- unexpected character 'b' at the end of partition Error initializing mtdparts! incorrect device type in ubi Partition ubi not found! Error, no UBI device/partition selected! Wrong Image Format for bootm command Error occured, error code = 112 ----- If the uboot configuration is examined with printenv I can see that mdtparts line (on a nsa310) is wrong: ----- mtdparts=mtdparts=orion_nand:0x0c0000(uboot), 0x80000(uboot_env),0x7ec0000(ubi)bootargs_root= ---- The "bootargs_root=" that was appended to it should not be there. Fix the issue by adding a \0 line terminator at the end of affected lines, mimicking what is also done by uboot upstream. This issue was detected and confirmed on a nsa310, nsa325 and a pogoplug v4, but it's not hardware-specific, so apply the same fix to other devices as well. Note that the issue is with the uboot's integrated boot configuration, which is not used unless the uboot configuration in flash is unavailable (erased or corrupted), which happens only on first time installation, or if the user deletes the uboot configuration when upgrading uboot. People just upgrading from an older uboot without erasing their previous uboot configuration stored in flash would not have noticed this issue. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* mac80211: make rtl8xxxu build againJohn Crispin2018-06-261-0/+38
| | | | | | | we only wanted to drop rtl8xxxue support Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit d8981133b27e7deebc79dc5fc51beb06b3b0a221)
* mac80211: rtl8xxxu: drop support patchesJohn Crispin2018-06-2658-3569/+0
| | | | | | | | | | After a very enlightening but unfortunately far too short exchange with Jes we mutually agreed to drop the patches. They are unfortunately not ready yet. Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit 66c5696cdf9599ccef652a651f52c0f7f53da44a)
* base-files: fix links in banner.failsafeSven Roederer2018-06-241-1/+3
| | | | | | | Update the link to the current section in the documentaion wiki. This fixes https://github.com/openwrt/packages/issues/6282 Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
* mac80211: backport brcmfmac changes from kernel 4.18Rafał Miłecki2018-06-2311-0/+631
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit c446e38c862201dd4d6a4fb8ea6e49172980952d)
* mac80211: backport brcmfmac firmware & clm_blob loading reworkRafał Miłecki2018-06-238-41/+1392
| | | | | | | It backports remaining brcmfmac changes from 4.17. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 7e8eb7f309a802ba10a13ddb807c6a31fecc9183)
* mac80211: backport brcmfmac data structure reworkRafał Miłecki2018-06-2310-9/+1426
| | | | | | | It backports brcmfmac commits from kernel 4.17. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 3c8bb92655c68a07abf5358ef23eb98422ed8d6d)
* mac80211: backport "brcmfmac: cleanup and some rework" from 4.17Rafał Miłecki2018-06-239-1/+772
| | | | | | | | | | | | It was described by Arend as: > This series is intended for 4.17 and includes following: > > * rework bus layer attach code. > * remove duplicate variable declaration. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 0da9303e5b444e2c98c24719c48c09f4c976c5a7)
* OpenWrt v18.06.0-rc1: revert to branch defaultsJo-Philipp Wich2018-06-221-2/+2
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* OpenWrt v18.06.0-rc1: adjust config defaultsv18.06.0-rc1Jo-Philipp Wich2018-06-221-2/+2
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "LEDE v18.06.0-rc1: adjust config defaults"Jo-Philipp Wich2018-06-221-1/+1
| | | | | | | This reverts commit 97b1765a45499ecc56db44f79453d3c6040bb5e7. The tree is in an inconsistent state and we need to complete some rebranding. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "LEDE v18.06.0-rc1: revert to branch defaults"Jo-Philipp Wich2018-06-221-1/+1
| | | | | | | This reverts commit 55df39e684f8fde90c52212350062440dc6c9754. The tree is in an inconsistent state and we need to complete some rebranding. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* LEDE v18.06.0-rc1: revert to branch defaultsJo-Philipp Wich2018-06-221-1/+1
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* LEDE v18.06.0-rc1: adjust config defaultsJo-Philipp Wich2018-06-221-1/+1
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* iptables: set nonshared flagJohn Crispin2018-06-221-0/+1
| | | | | | | this makes sure that offloading support is properly included for v4.14 targets. Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit ebe1216c7cd10357c3277fb25bae4e508d4b165a)
* mac80211: fix up ath10k led patchJohn Crispin2018-06-221-26/+52
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mac80211: drop 355-ath9k-limit-retries-for-powersave-response-frames.patchJohn Crispin2018-06-2218-235/+153
| | | | | | | several people reported this bug to be causing drop out issues Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit cac1a4be66f548735878beccc10dc4b1ec7ad364)
* mac80211: ath10k fix vht160 firmware crashAnsuel Smith2018-06-222-0/+182
| | | | | | | When the 160mhz width is selected the ath10k firmware crash. This fix this problem. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> (cherry picked from commit 134e832814f1986c7ee06ac00806ebb6e762fd15)
* mac80211: ath10k add leds supportAnsuel Smith2018-06-221-0/+617
| | | | | | | This adds support for leds handled by the wireless chipset. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> (cherry picked from commit 61d57a2f88b90ba951012e66c7c6fae9234c97b4)
* wwan: Add support for Gemalto Cinterion cellular modulesDavid Thornley2018-06-224-1/+17
| | | | | | | | | | | | | | Includes specific support for PH8(1e2d-0053) / ELS61(1e2d-005b) modules. Note for ELS61, the serial driver changes from serial option(ttyUSB) to usb-cdc (ttyACM). Two additional fixes in this commit resolve issues with ttyACM devices: - * wwan.sh - sys-fs has a subdirectory indirection (*/tty/ttyACMx) which was not handled properly * wwan.usb - dependent scripts were not included, so this never actually called proto_set_available for example (and relied on inadvertent call for ttyUSB case) Signed-off-by: David Thornley <david.thornley@touchstargroup.com> (cherry picked from commit cb262b09396edd171eb3903e50ce5ddeb593f963)
* busybox: udhcpc: replace udhcpc_no_msg_dontroute patch by upstream fixHans Dedecker2018-06-213-12/+118
| | | | | | | | Replace 204-udhcpc_no_msg_dontroute patch by the upstream busybox fix which removes the code which requires the server ID to be on local network Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "base-files: fix UCI config parsing and callback handling"Hans Dedecker2018-06-212-6/+9
| | | | | | | This reverts commit 023944853241920c20842c0f4649d1dd4e7e273b as users report Qos scripts are broken (FS#1602) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mt76: update to the latest versionFelix Fietkau2018-06-211-3/+3
| | | | | | | | 072fdac mt76x2: mac: consider multicast/broadcast frames in ewma rssi estimation f450659 mt76x2: improve gain adjustment in noisy environments 1d4ca10 mt76x2: track rssi for gain adjustment per station Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq40xx: add support for ZyXEL WRE6606Magnus Frühling2018-06-212-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SOC: Qualcomm IPQ4018 (DAKOTA) ARM Quad-Core RAM: 128 MB Nanya NT5CC64M16GP-DI FLASH: 16 MiB Macronix MX25L12845EMI-12G ETH: Qualcomm QCA8072 WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11b/g/n 2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11n/ac W2 2x2 INPUT: WPS, Mode-toggle-switch LED: Power, WLAN 2.4GHz, WLAN 5GHz, LAN, WPS (LAN not controllable by software) (WLAN each green / red) SERIAL: Header next to eth-phy. VCC, TX, GND, RX (Square hole is VCC) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet (Correct MAC-address) - 2.4 GHz WiFi (Correct MAC-address) - 5 GHz WiFi (Correct MAC-address) - Factory installation from tftp - OpenWRT sysupgrade - LEDs - WPS Button Not Working: - Mode-toggle-switch Install via TFTP: Connect to the devices serial. Hit Enter-Key in bootloader to stop autobooting. Command `tftpboot` will pull an initramfs image named `C0A86302.img` from a tftp server at `192.168.99.08/24`. After successfull transfer, boot the image with `bootm`. To persistently write the firmware, flash an openwrt sysupgrade image from inside the initramfs, for example transfer via `scp <sysupgrade> root@192.168.1.1:/tmp` and flash on the device with `sysupgrade -n /tmp/<sysupgrade>`. append-cmdline patch taken from chunkeeys work on the NBG6617. Signed-off-by: Magnus Frühling <skorpy@frankfurt.ccc.de> Co-authored-by: David Bauer <mail@david-bauer.net> Co-authored-by: Christian Lamparter <chunkeey@googlemail.com> (cherry picked from commit 4b280ad91a6b155ac71c417aaa7bb5f4e328712f)
* ar71xx: add support for OCEDO KoalaDavid Bauer2018-06-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the OCEDO Koala SOC: Qualcomm QCA9558 (Scorpion) RAM: 128MB FLASH: 16MiB WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3 WLAN2: QCA9880 5 GHz 802.11nac 3x3 INPUT: RESET button LED: Power, LAN, WiFi 2.4, WiFi 5, SYS Serial: Header Next to Black metal shield Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet - 2.4 GHz WiFi - 5 GHz WiFi - TFTP boot from ramdisk image - Installation via ramdisk image - OpenWRT sysupgrade - Buttons - LEDs Installation seems to be possible only through booting an OpenWRT ramdisk image. Hold down the reset button while powering on the device. It will load a ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8. Note: depending on the present software, the device might also try to pull a file called 'koala-uimage-factory'. Only the name differs, it is still used as a ramdisk image. Wait for the ramdisk image to boot. OpenWRT can be written to the flash via sysupgrade or mtd. Due to the flip-flop bootloader which we not (yet) support, you need to set the partition the bootloader is selecting. It is possible from the initramfs image with > fw_setenv bootcmd run bootcmd_1 Afterwards you can reboot the device. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit e36f8b3f3980903d5cefc51fe274c19c7a0719f2)
* wireguard: bump to 0.0.20180620Kevin Darbyshire-Bryant2018-06-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | 0bc4230 version: bump snapshot ed04799 poly1305: add missing string.h header cbd4e34 compat: use stabler lkml links caa718c ratelimiter: do not allow concurrent init and uninit 894ddae ratelimiter: mitigate reference underflow 0a8a62c receive: drop handshake packets if rng is not initialized cad9e52 noise: wait for crng before taking locks 83c0690 netlink: maintain static_identity lock over entire private key update 0913f1c noise: take locks for ss precomputation 073f31a qemu: bump default kernel bec4c48 wg-quick: android: don't forget to free compiled regexes 7ce2ef3 wg-quick: android: disable roaming to v6 networks when v4 is specified 9132be4 dns-hatchet: apply resolv.conf's selinux context to new resolv.conf 41a5747 simd: no need to restore fpu state when no preemption 6d7f0b0 simd: encapsulate fpu amortization into nice functions f8b57d5 queueing: re-enable preemption periodically to lower latency b7b193f queueing: remove useless spinlocks on sc 5bb62fe tools: getentropy requires 10.12 4e9f120 chacha20poly1305: use slow crypto on -rt kernels on arm too Compiled-for: ar71xx, lantiq Run-tested-on: ar71xx Archer C7 v2 & lantiq HH5a Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: fix dnsmasq startup issueHans Dedecker2018-06-202-9/+1
| | | | | | | | | | | Commit ecd954d530 installs specific interface triggers which rewrites the dnsmasq config file and restarts dnsmasq if the network interface becomes active for which a trigger has been installed. In case no dhcp sections are specified or ignore is set to 1 dnsmasq will not be started at startup which breaks DNS resolving. Fix this by ditching the BOOT check in start_service and always start dnsmasq at startup. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ds-lite: make tunnel encapsulation limit support configurable (FS#1501)Hans Dedecker2018-06-192-3/+7
| | | | | | | | | | | | Be compatible with ISPs which don't support the destination option header containing the tunnel encapsulation limit as reported in FS#1501. Setting the uci parameter encaplimit to ignore; allows to disable the insertion of the destination option header in the ds-lite packets. Otherwise the tunnel encapsulation limit value can be set to a value from 0 till 255 by setting the encaplimit uci parameter accordingly. If no encaplimit value is specified the default value is 4 as before. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcp6c: make ds-lite/map tunnel encapsulation limit support configurable ↵Hans Dedecker2018-06-193-3/+9
| | | | | | | | | | | | | | (FS#1501) Be compatible with ISPs which don't support the destination option header containing the tunnel encapsulation limit as reported in FS#1501 for dynamic created ds-lite/map interfaces. Setting the uci parameter encaplimit_dslite/map to ignore; allows to disable the insertion of the destination option header for the dynamic created ds-lite/map interface. Otherwise the tunnel encapsulation limit value can be set to a value from 0 till 255 by setting the encaplimit_dslite/map uci parameter accordingly. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: update to latest git HEAD (FS#1501)Hans Dedecker2018-06-191-3/+3
| | | | | | a580028 system-linux: make encaplimit configurable for ip6 tunnels (FS#1501) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* map: make tunnel encapsulation limit support configurable (FS#1501)Hans Dedecker2018-06-192-8/+10
| | | | | | | | | | | | Be compatible with ISPs which don't support the destination option header containing the tunnel encapsulation limit as reported in FS#1501. Setting the uci parameter encaplimit to ignore; allows to disable the insertion of the destination option header in the map-e packets. Otherwise the tunnel encapsulation limit value can be set to a value from 0 till 255 by setting the encaplimit uci parameter accordingly. If no encaplimit value is specified the default value is 4 as before. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: add missing softdog symbolJohn Crispin2018-06-191-1/+2
| | | | | Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit 9c409cb4e2670edddd8de5e8536ea295d44b9e16)
* cron: add procd listeners for crontabsPaul Spooren2018-06-181-3/+5
| | | | | | | | | Add procd file listeners to check files in `/etc/crontabs/`. Also unified a bit the function style. Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit cbf69fb2adced6096addbe6aeb54c1971c63dbe4)
* ltq-vdsl-mei: reset g_tx_link_rate on showtime exitMartin Schiller2018-06-181-0/+12
| | | | | | | | | | | | | Without this change, ifx_mei_atm_showtime_check() will always return "showtime" after one call of MEI_InternalXtmSwhowtimeEntrySignal() was done, even if MEI_InternalXtmSwhowtimeExitSignal() was called in the meantime. The ifx_mei_atm_showtime_check() function is used by the ltq-atm and ltq-ptm driver. Signed-off-by: Martin Schiller <ms@dev.tdt.de> (cherry picked from commit eee8ab59dc8bc4c599b3508201349fdd96463e69)
* mtd: mark as nonshared to fix FS#484Mirko Parthey2018-06-181-0/+2
| | | | | | | | | | | The mtd tool is built with different configurations depending on the target. For example, brcm47xx adds the fixtrx subcommand, without which an image fails when booting the second time. Mark the mtd package as nonshared to really fix FS#484. Signed-off-by: Mirko Parthey <mirko.parthey@web.de> (cherry picked from commit 46d7ced9d1e104693a9f995bfe8a6e28ac82b592)
* uboot-oxnas: fix typo accidentally committed during oxnas rebootDaniel Golle2018-06-181-1/+1
| | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry-picked from ff0f3522b7)
* uboot-oxnas: fix build with newer GCCDaniel Golle2018-06-182-0/+593
| | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry-picked from d44b7b7d31)
* oxnas: reboot targetDaniel Golle2018-06-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reboot the oxnas target based on Linux 4.14 by rebasing our support on top of the now-existing upstream kernel support. This commit brings oxnas support to the level of v4.17 having upstream drivers for Ethernet, Serial and NAND flash. Botch up OpenWrt's local drivers for EHCI, SATA and PCIe based on the new platform code and device-tree. Re-introduce base-files from old oxnas target which works for now but needs further clean-up towards generic board support. Functional issues: * PCIe won't come up (hence no USB3 on Shuttle KD20) * I2C bus of Akitio myCloud device is likely not to work (missing debounce support in new pinctrl driver) Code-style issues: * plla/pllb needs further cleanup -- currently their users are writing into the syscon regmap after acquireling the clk instead of using defined clk_*_*() functions to setup multipliers and dividors. * PCIe phy needs its own little driver. * SATA driver is a monster and should be split into an mfd having a raidctrl regmap, sata controller, sata ports and sata phy. Tested on MitraStar STG-212 aka. Medion Akoya MD86xxx and Shuttle KD20. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (squash-picked commit 17511a7ea8 and commit dcc34574ef from master)
* mt76: update to the latest versionFelix Fietkau2018-06-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | 73edb22 mt76: discard early received packets if not running yet 0b8d1dd mt76: fix beacon timer drift 20c0766 mt7603: adjust rx hang watchdog for MT7628 664e321 mt7603: add extra PSE hang check signature for MT7628 f24b56f update MT7628 firmware to the latest version d87e4b0 mt7603: clear PSE reset bit if PSE reset fails 0ef26ef mt76: only stop tx queues on offchannel, not during the entire scan f399da3 mt76: prevent tx scheduling during channel change 21c1e1e mt76: move ieee80211_hw allocation to common core 730c292 mt76: wait for pending tx to complete before switching channel fcbb49e mt76x2: use udelay instead of usleep_range in mt76x2_mac_stop 792dbe0 mt7603: do not hold dev->mutex while flushing dev->mac_work 9090f9c mt76x2: fix threshold for gain adjustment 2cbaa57 mt76x2: fix swapped values for RXO-18 in gain control a39ab70 mt76x2: adjust AGC control register 26 based on gain for VHT80 4936c0c mt76x2: clear false CCA counters after changing gain settings 1528fe7 mt76x2: fix variable gain adjustment range f3522e1 mt76x2: add a debugfs file to dump agc calibration information 65e161b mt76x2: fix tracking rssi for dynamic gain adjustment Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libnfnetlink: Remove dead mirrorDaniel Engberg2018-06-141-2/+1
| | | | | | Remove mirrors.evolva.ro as it's no longer available Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* dnsmasq: fix confdir option processing (FS#1572)Hans Dedecker2018-06-112-2/+3
| | | | | | | | Fix condir option processing allowing to use the format "<directory>[,<file-extension>......]," as documented on the dnsmasq man page which previously resulted into bogus dir being created. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* base-files: sysupgrade: fix handling get_image unpack commandsMatthias Schiffer2018-06-111-6/+6
| | | | | | | | On bcm53xx and brcm47xx, commands are passed to default_do_upgrade that expect the image to be passed on stdin, rather than as an argument. Fixes: 30f61a34b4cf ("base-files: always use staged sysupgrade") Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mac80211: rt2x00: no longer use TXOP_BACKOFF for probe framesDaniel Golle2018-06-112-1/+46
| | | | | | | | Import a revert-commit from Stanislaw Gruszka which significantly improves WiFi performance on rt2x00 based hardware. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry-picked from commit f4a639a3d7d40b4f63c431c2d554c479fbcc6b74)
* mtd-utils: revert faulty upstream patch for nowChristian Lamparter2018-06-081-0/+30
| | | | | | | | | | | | | | | | | | Some of the ubi-tools in the upstream mtd-utils have been broken by a bad patch upstream. It causes major breakage during sysupgrade when the kernel, rootfs, ... volumes are deleted in the wrong order. This patch therefore reverts the faulty upstream commit which fixes the bug. linux-mtd mailing-list thread: <http://lists.infradead.org/pipermail/linux-mtd/2018-June/081562.html> Cc: John Crispin <john@phrozen.org> Reported-by: L. Wayne Leach <LLeachii@aol.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit daf19649dbf101ce7ae17abf84eeed7a30b41275)
* busybox: udhcpc: no MSG_DONTROUTE when sending packetAdi Shammout2018-06-072-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts a change made in Sep 2017 [1] which introduced MSG_DONTROUTE flag to prevent udhcpc from reaching out to servers on a different subnet. That change violates RFC2131 by forcing fully configured clients, who got their configurations through an offer relayed by a DHCP relay, from renewing through a unicast request directly to the DHCP server, resulting in the client resorting to boradcasting lease extension requests instead of unicasting them, further breaking RFC2131. The problem with MSG_DONTROUTE appears when talking to a properly configured DHCP server that rejects non-compliant requests. Such server will reject lease extension attempts sent via broadcast rather than unicast, as is the case with Finnish ISPs Telia and DNA as well as Estonian ISP Starman. Once the lease expires without renewal, udhcpc enters init mode, taking down the interfaces with it, and thus causing interruption on every lease expiry. On some ISPs (such as the ones mentioned above) that can be once every 10-20 minutes. The interruptions appear in the logs as such: ---- udhcpc: sending renew to x.x.x.x udhcpc: send: Network unreachable udhcpc: sending renew to 0.0.0.0 udhcpc: sending renew to 0.0.0.0 ... udhcpc: lease lost, entering init state Interface 'wan' has lost the connection Interface 'wan' is now down Network alias 'eth0' link is down udhcpc: sending select for y.y.y.y udhcpc: lease of y.y.y.y obtained, lease time 1200 Network alias 'eth0' link is up Interface 'wan' is now up ---- During lease extension, a fully configured client should be able to reach out to the server from which it recieved the lease for extension, regardless in which network it is; that's up to the gateway to find. [2] This patch ensures that. [1] http://lists.busybox.net/pipermail/busybox-cvs/2017-September/037402.html [2] https://www.netmanias.com/en/post/techdocs/6000/dhcp-network-protocol/ understanding-dhcp-relay-agents Signed-off-by: Adi Shammout <adi.shammout@outlook.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* logd: create log directory for log_fileKarl Palsson2018-06-072-1/+3
| | | | | | | If log_file is specified, make sure its directory exists. Signed-off-by: Karl Palsson <karlp@etactica.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* base-files: fix UCI config parsing and callback handlingTony Ambardar2018-06-062-9/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are several long-standing issues present in the UCI shell API as documented in https://wiki.openwrt.org/doc/devel/config-scripting. They relate both to high-level, user-defined callback functions used to process UCI config files, and also to low-level functions used within scripts generally. The related problems have been encountered now and in the past, e.g. https://forum.openwrt.org/viewtopic.php?id=54295, and include: a) UCI parsing option() function and user-defined option_cb() callbacks being erroneously called during processing of "list" config file entries; b) normal usage of the low-level config_set() unexpectedy calling any defined option_cb() if present; and c) handling of the list_cb() not respecting the NO_CALLBACK variable. Root causes include a function stack "inversion", where the low-level config_set() function incorrectly calls the high-level option() function, intended only for processing the "option" keyword of UCI config files. This change addresses the inversion and other issues, making the option handling code more consistent and smaller, and simplifying developers' usage of UCI callbacks. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* wireguard: bump to 0.0.20180531 to fix flow offloadingJason A. Donenfeld2018-05-311-6/+5
| | | | | | | | | | This version bump was made upstream mostly for OpenWRT, and should fix an issue with a null dst when on the flow offloading path. While we're at it, Kevin and I are the only people actually taking care of this package, so trim the maintainer list a bit. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* kernel: whitespace fixesJohn Crispin2018-05-241-2/+0
| | | | | Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit 22c16c5d823fa8de1c05837faf7b404405b8c74f)
* hostapd: fix IEEE 802.11r (fast roaming) defaultsGospod Nassa2018-05-241-21/+27
| | | | | | | | | | | | | | | | | | | | | | | | | Use ft_psk_generate_local=1 by default, as it makes everything else fairly trivial. All of the r0kh/r1kh and key management stuff goes away and hostapd fairly much does it all for us. We do need to provide nas_identifier, which can be derived from the BSSID, and we need to generate a mobility_domain, for which we default to the first four chars of the md5sum of the SSID. The complex manual setup should also still work, but the defaults also now work easily out of the box. Verified by manually running hostapd (with the autogenerated config) and watching the debug output: wlan2: STA ac:37:43:a0:a6:ae WPA: FT authentication already completed - do not start 4-way handshake This was previous submitted to LEDE in https://github.com/lede-project/source/pull/1382 [dwmw2: Rewrote commit message] Signed-off-by: Gospod Nassa <devianca@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> (cherry picked from commit 3cc56a5534b8b49a7e9ba57edf9878ec32bdd27a)
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-06 09:34:21 +0000