aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* ipq807x: add Qualcomm Atheros IPQ807x targetRobert Marko2023-01-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qualcomm Atheros IPQ807x is a modern WiSoC featuring: * Quad Core ARMv8 Cortex A-53 * @ 2.2 GHz (IPQ8072A/4A/6A/8A) Codename Hawkeye * @ 1.4 GHz (IPQ8070A/1A) Codename Acorn * Dual Band simultaneaous IEEE 802.11ax * 5G: 8x8/80 or 4x4/160MHz (IPQ8074A/8A) * 5G: 4x4/80 or 2x2/160MHz (IPQ8071A/2A/6A) * 5G: 2x2/80MHz (IPQ8070A) * 2G: 4x4/40MHz (IPQ8072A/4A/6A/8A) * 2G: 2x2/40MHz (IPQ8070A/1A) * 1x PSGMII via QCA8072/5 (Max 5x 1GbE ports) * 2x SGMII/USXGMII (1/2.5/5/10 GbE) on Hawkeye * 2x SGMII/USXGMII (1/2.5/5 GbE) on Acorn * DDR3L/4 32/16 bit up to 2400MT/s * SDIO 3.0/SD card 3.0/eMMC 5.1 * Dual USB 3.0 * One PCIe Gen2.1 and one PCIe Gen3.0 port (Single lane) * Parallel NAND (ONFI)/LCD * 6x QUP BLSP SPI/I2C/UART * I2S, PCM, and TDMA * HW PWM * 1.8V configurable GPIO * Companion PMP8074 PMIC via SPMI (GPIOS, RTC etc) Note that only v2 SOC models aka the ones ending with A suffix are supported, v1 models do not comply to the final 802.11ax and have lower clocks, lack the Gen3 PCIe etc. SoC itself has two UBI32 cores for the NSS offloading system, however currently no offloading is supported. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: ath11k: hack for multiple card supportRobert Marko2023-01-163-1/+302
| | | | | | | | | | | | This is a temporary workaround for supporting multiple cards or AHB+PCI. There is ongoing upstream work to properly support this based of advertised FW features, but that is still ongoing. This is only supported on QCN9074 cards due to FW limitation, so HW ID is checked in order to prevent breaking QCA6390 and other popular cards. Signed-off-by: Robert Marko <robimarko@gmail.com>
* firmware: add ath11k-firmware packageRobert Marko2023-01-161-0/+66
| | | | | | | | | | Package ath11k firmware for AHB devices as well as QCN9074 which is a non consumer card targeted as a companion for QCA WiSoC-s. linux-firmware is always out of date for these, so fetch them from Kalle-s repo like we do for ath10k. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ramips: mt7621: Add Arcadyan WE420223-99 supportHarm Berntsen2023-01-151-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Arcadyan WE420223-99 is a WiFi AC simultaneous dual-band access point distributed as Experia WiFi by KPN in the Netherlands. It features two ethernet ports and 2 internal antennas. Specifications -------------- SOC : Mediatek MT7621AT ETH : Two 1 gigabit ports, built into the SOC WIFI : MT7615DN BUTTON: Reset BUTTON: WPS LED : Power (green+red) LED : WiFi (green+blue) LED : WPS (green+red) LED : Followme (green+red) Power : 12 VDC, 1A barrel plug Winbond variant: RAM : Winbond W631GG6MB12J, 1GBIT DDR3 SDRAM Flash : Winbond W25Q256JVFQ, 256Mb SPI U-Boot: 1.1.3 (Nov 23 2017 - 16:40:17), Ralink 5.0.0.1 Macronix variant: RAM : Nanya NT5CC64M16GP-DI, 1GBIT DDR3 SDRAM Flash : MX25l25635FMI-10G, 256Mb SPI U-Boot: 1.1.3 (Dec 4 2017 - 11:37:57), Ralink 5.0.0.1 Serial ------ The serial port needs a TTL/RS-232 3V3 level converter! The Serial setting is 57600-8-N-1. The board has an unpopulated 2.54mm straight pin header. The pinout is: VCC (the square), RX, TX, GND. Installation ------------ See the Wiki page [1] for more details, it comes down to: 1. Open the device, take off the heat sink 2. Connect the SPI flash chip to a flasher, e.g. a Raspberry Pi. Also connect the RESET pin for stability (thanks @FPSUsername for reporting) 3. Make a backup in case you want to revert to stock later 4. Flash the squashfs-factory.trx file to offset 0x50000 of the flash 5. Ensure the bootpartition variable is set to 0 in the U-Boot environment located at 0x30000 Note that the U-Boot is password protected, this can optionally be removed. See the forum [2] for more details. MAC Addresses(stock) -------------------- +----------+------------------+-------------------+ | use | address | example | +----------+------------------+-------------------+ | Device | label | 00:00:00:11:00:00 | | Ethernet | + 3 | 00:00:00:11:00:03 | | 2g | + 0x020000f00001 | 02:00:00:01:00:01 | | 5g | + 1 | 00:00:00:11:00:01 | +----------+------------------+-------------------+ The label address is stored in ASCII in the board_data partition Notes ----- - This device has a dual-boot partition scheme, but OpenWRT will claim both partitions for more storage space. Known issues ------------ - 2g MAC address does not match stock due to missing support for that in macaddr_add - Only the power LED is configured by default References ---------- [1] https://openwrt.org/inbox/toh/arcadyan/astoria/we420223-99 [2] https://forum.openwrt.org/t/adding-openwrt-support-for-arcadyan-we420223-99-kpn-experia-wifi/132653 Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Harm Berntsen <git@harmberntsen.nl>
* ipq40xx: add support for Linksys WHW03 V2Vincent Tremblay2023-01-155-1/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SOC: Qualcomm IPQ4019 WiFi 1: QCA4019 IEEE 802.11b/g/n WiFi 2: QCA4019 IEEE 802.11a/n/ac WiFi 3: QCA8888 IEEE 802.11a/n/ac Bluetooth: Qualcomm CSR8811 (A12U) Zigbee: Silicon Labs EM3581 NCP + Skyworks SE2432L Ethernet: Qualcomm Atheros QCA8072 (2-port) Flash 1: Mactronix MX30LF4G18AC-XKI RAM (NAND): SK hynix H5TC4G63CFR-PBA (512MB) LED Controller: NXP PCA9633 (I2C) Buttons: Single reset button (GPIO). - The three WiFis were fully tested and are configured with the same settings as in the vendor firmware. - The specific board files were submitted to the ATH10k mailing list but I'm still waiting for a reply. They can be removed once they are approved upstream. - Two ethernet ports are accessible on the device. By default one is configured as WAN and the other one is LAN. They are fully working. Bluetooth: ======== - Fully working with the following caveats: - RFKILL need to be enabled in the kernel. - An older version of bluez is needed as bccmd is needed to configure the chip. Zigbee: ====== - The spidev device is available in the /dev directory. - GPIOs are configured the same way as in the vendor firmware. - Tests are on-going. I am working on getting access to the Silicon Labs stack to validate that it is fully working. Installation: ========= The squash-factory image can be installed via the Linksys Web UI: 1. Open "http://192.168.1.1/ca" (Change the IP with the IP of your device). 2. Login with your admin password. 3. To enter into the support mode, click on the "CA" link and the bottom of the page. 4. Open the "Connectivity" menu and upload the squash-factory image with the "Choose file" button. 5. Click start. Ignore all the prompts and warnings by click "yes" in all the popups. The device uses a dual partition mechanism. The device automatically revert to the previous partition after 3 failed boot attempts. If you want to force the previous firmware to load, you can turn off and then turn on the device for 2 seconds, 3 times in a row. It can also be done via TFTP: 1. Setup a local TFTP server and configure its IP to 192.168.1.100. 2. Rename your image to "nodes_v2.img" and put it to the TFTP root of your server. 3. Connect to the device through the serial console. 4. Power on device and press enter when prompted to drop into U-Boot. 5. Flash the partition of your choice by typing "run flashimg" or "run flashimg2". 6. Once flashed, enter "reset" to reboot the device. Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Vincent Tremblay <vincent@vtremblay.dev>
* ipq40xx: Add support ZTE MF18AMarcin Gajda2023-01-143-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Light and small router ( In Poland operators sells together with MC7010 outdoor modem to provide WIFI inside home). Device specification SoC Type: Qualcomm IPQ4019 RAM: 256 MiB Flash: 128 MiB SPI NAND (Winbond W25N01GV) ROM: 2MiB SPI Flash (GD25Q16) Wireless 2.4 GHz (IP4019): b/g/n, 2x2 Wireless 5 GHz (QCA9982): a/n/ac, 3x3 Ethernet: 2xGbE (WAN/LAN1, LAN2) USB ports: No Button: 2 (Reset/WPS) LEDs: 3 external leds: Power (blue) , WiFI (blue and red), SMARTHOME (blue and red) and 1 internal (blue) -- NOTE: Power controls all external led (if down ,all others also not lights even signal is up) Power: 5VDC, 2,1A via USB-C socket Bootloader: U-Boot On board ZWave and Zigbee (EFR32 MG1P232GG..) modules ( not supported by orginal software ) Installation 1.Open MF18A case by ungluing rubber pad under the router and unscrew screws, and connect to serial console port, with the following pinout, starting from pin 1, which is the topmost pin when the board is upright (reset button on the bottom) : VCC (3.3V). Do not use unless you need to source power for the converer from it. TX RX GND Default port configuration in U-boot as well as in stock firmware is 115200-8-N-1. 2.Place OpenWrt initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 3.Connect TFTP server to RJ-45 port (WAN/LAN1). 4.Power on MF18A , stop in u-Boot (using ESC button) and run u-Boot commands: setenv serverip 192.168.0.2 setenv ipaddr 192.168.0.1 set fdt_high 0x85000000 tftpboot 0x84000000 openwrt-ipq40xx-generic-zte_mf18a-initramfs-fit-zImage.itb bootm 0x84000000 5.Please make backup of original partitions, if you think about revert to stock, specially mtd8 (Web UI) and mtd9 (rootFS). Use /tmp as temporary storage and do: WEB PARITION cat /dev/mtd8 > /tmp/mtd8.bin scp /tmp/mtd8.bin root@YOURSERVERIP:/ rm /tmp/mtd8.bin ROOT PARITION cat /dev/mtd9 > /tmp/mtd9.bin scp /tmp/mtd9.bin root@YOURSERVERIP:/ rm /tmp/mtd9.bin If you are sure ,that you want to flash openwrt, from uBoot, before bootm, clean rootfs partition with command: nand erase 0x1800000 0x1D00000 6.Login via ssh or serial and remove stock partitions (default IP 192.168.1.1): ubiattach -m 9 # it could return error if ubi was attached before or rootfs part was erased before ubirmvol /dev/ubi0 -N ubi_rootfs # it could return error if rootfs part was erased before ubirmvol /dev/ubi0 -N ubi_rootfs_data # some devices doesn't have it 7. Install image via : sysupgrade -n /tmp/openwrt-ipq40xx-generic-zte_mf18a-squashfs-sysupgrade.bin previously wgeting bin. Sometimes it could print ubi attach error, but please ignore it if process goes forward. Back to Stock (!!! need original dump taken from initramfs !!!) ------------- Place mtd8.bin and mtd9.bin initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 Connect serial console (115200,8n1) to serial console connector . Connect TFTP server to RJ-45 port (WAN/LAN1). rename mtd8.bin to web.img and mtd9.bin to root_uImage_s Stop in u-Boot (using ESC button) and run u-Boot commands: This will erase Web and RootFS: nand erase 0x1000000 0x800000 nand erase 0x1800000 0x1D00000 This will restore RootFS: tftpboot 0x84000000 root_uImage_s nand erase 0x1800000 0x1D00000 nand write 0x84000000 0x1800000 0x1D00000 This will restore Web Interface: tftpboot 0x84000000 web.img nand erase 0x1000000 0x800000 nand write 0x84000000 0x1000000 0x800000 After first boot on stock firwmare, do a factory reset. Push reset button for 5 seconds so all parameters will be reverted to the one printed on label on bottom of the router As reference was taken MF289F support by Giammarco Marzano stich86@gmail.com and MF286D by Pawel Dembicki paweldembicki@gmail.com Signed-off-by: Marcin Gajda <mgajda@o2.pl>
* ramips: add basic support for TP-Link EC330-G5u v1Mikhail Zhilkin2023-01-141-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds basic support for TP-Link EC330-G5u Ver:1.0 router (also known as TP-Link Archer C9ERT). Device specification -------------------- SoC Type: MediaTek MT7621AT RAM: 128 MiB, Nanya NT5CC64M16GP-DI Flash: 128 MiB NAND, ESMT F59L1G81MA-25T Wireless 2.4 GHz (MediaTek MT7615N): b/g/n, 4x4 Wireless 5 GHz (MediaTek MT7615N): a/n/ac, 4x4 Ethernet: 5xGbE (WAN, LAN1, LAN2, LAN3, LAN4) USB ports: 1xUSB3.0 Button: 4 (Led, WiFi On/Off, Reset, WPS) LEDs: 7 blue LEDs, 1 orange(amber) LED, 1 white(non-gpio) LED Power: 12 VDC, 2 A Connector type: Barrel Bootloader: First U-Boot (1.1.3), Main U-Boot (1.1.3). Additionally, original TP-Link firmware contains Image U-Boot (1.1.3). Serial console (UART) --------------------- V +-------+-------+-------+-------+ | +3.3V | GND | TX | RX | +---+---+-------+-------+-------+ | J2 | +--- Don't connect Installation ------------ 1. Rename OpenWrt initramfs image to test.bin and place it on tftp server with IP 192.168.0.5 2. Attach UART, switch on the router and interrupt the boot process by pressing 't' 3. Load and run OpenWrt initramfs image: tftpboot bootm 4. Once inside OpenWrt, switch to the first boot image: fw_setenv BootImage 0 5. Run 'sysupgrade -n' with the sysupgrade OpenWrt image Back to Stock ------------- 1. Run in the OpenWrt shell: fw_setenv BootImage 1 reboot Recovery -------- 1. Press Reset button and power on the router 2. Navigate to U-Boot recovery web server (http://192.168.0.1/) and upload the OEM firmware MAC addresses ------------- +---------+-------------------+-------------------+-------------+ | | MAC example 1 | MAC example 2 | Algorithm | +---------+-------------------+-------------------+-------------+ | label | 68:ff:7b:xx:xx:f4 | 50:d4:f7:xx:xx:da | label | | LAN | 68:ff:7b:xx:xx:f4 | 50:d4:f7:xx:xx:da | label | | WAN | 72:ff:7b:xx:xx:f5 | 54:d4:f7:xx:xx:db | label+1 [1] | | WLAN 2g | 68:ff:7b:xx:xx:f4 | 50:d4:f7:xx:xx:da | label | | WLAN 5g | 68:ff:7b:xx:xx:f6 | 50:d4:f7:xx:xx:dc | label+2 | +---------+-------------------+-------------------+-------------+ label MAC address was found in factory at 0x165 (text format xx:xx:xx:xx:xx:xx). Notes ----- [1] WAN MAC address: a. First octet of WAN MAC is differ than others and OUI is not related to TP-Link company. This probably should be fixed. b. Flipping bits in first octet and hex delta are different for the different MAC examples: +-----------------+----------------+----------------+ | | Example 1 | Example 2 | +-----------------+----------------+----------------+ | LAN | 68 = 0110 1000 | 50 = 0101 0000 | | MAC (1st octet) | ^ ^ ^ | | +-----------------+----------------+----------------+ | WAN | 72 = 0111 0010 | 54 = 0101 0100 | | MAC (1st octet) | ^ ^ ^ | ^ | +-----------------+----------------+----------------+ | HEX delta | 0xa | 0x4 | +-----------------+----------------+----------------+ | DEC delta | 4 | 4 | +-----------------+----------------+----------------+ c. DEC delta is a constant (4). This looks like a mistake in OEM firmware and probably should be fixed. Based on the above, I decided to keep correct OUI and make WAN MAC = label + 1. [2] Bootloaders The device contains 3 bootloaders: - First U-Boot: U-Boot 1.1.3 (Mar 18 2019 - 12:50:24). The First U-Boot located on NAND Flash to load next full-feature Uboot. - Main U-Boot + its backup: U-Boot 1.1.3 (Mar 18 2019 - 12:50:29). This bootloader includes recovery webserver. Requires special uImages to continue the boot process: 0x00 (os0, os1) - firmware uImage 0x40 (os0, os1) - standalone uImage (OpenWrt kernel is here) - Additionally, both slots of the original TP-Link firmware contains Image U-Boot: U-Boot 1.1.3 (Oct 16 2019 - 08:14:45). It checks image magics and CRCs. We don't use this U-Boot with OpenWrt. Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* trace-cmd: update to v3.1.6Nick Hainke2023-01-131-2/+2
| | | | | | Update to latest release. Signed-off-by: Nick Hainke <vincent@systemli.org>
* libtracefs: update to 1.6.4Nick Hainke2023-01-131-2/+2
| | | | | | Update to latest release. Signed-off-by: Nick Hainke <vincent@systemli.org>
* libtraceevent: update to 1.7.1Nick Hainke2023-01-131-2/+2
| | | | | | Update to latest release. Signed-off-by: Nick Hainke <vincent@systemli.org>
* uboot-mediatek: update to U-Boot 2023.01Daniel Golle2023-01-1370-12398/+118
| | | | | | | | Support for MT7981 and MT7986 has been merged, remove patches. Tested on a couple of MT7986, MT7622 and MT7623 boards. MIPS builds are untested. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-envtools: update to 2023.01Linhui Liu2023-01-131-3/+3
| | | | | | Update to latest version. Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* mac80211: ath11k: fix monitor bringupRobert Marko2023-01-122-0/+240
| | | | | | | | | | Currently, ath11k will crash the crash if we try to bringup the monitor mode interface. Luckily, it has already been fixed upstream, so backport the patches fixing it. Fixes: 93ae4353cdf6 ("mac80211: add ath11k PCI support") Signed-off-by: Robert Marko <robimarko@gmail.com>
* lldpd: use release tar instead of codeloadChristian Marangi2023-01-121-2/+2
| | | | | | | | | | | | | | | | | | | There is currently a problem with making reproducible version of lldpd. The tool version is generated based on 3 source: 1. .dist-version file in release tar 2. git hash with presence of .git directory 3. current date Using the codeload tar from github results in getting the repo without the .git directory and since they are not release tar, we don't have .dist-version. This results in having lldpd bin with a version set to the current build time. Switch to release tar so that we correctly have a .dist-version file and the version is not based on the build time. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* ksmbd: Fix ZDI-CAN-18259Hauke Mehrtens2023-01-113-1/+100
| | | | | | | | | | | This fixes a security problem in ksmbd. It currently has the ZDI-CAN-18259 ID assigned, but no CVE yet. Backported from: https://github.com/cifsd-team/ksmbd/commit/8824b7af409f51f1316e92e9887c2fd48c0b26d6 https://github.com/cifsd-team/ksmbd/commit/cc4f3b5a6ab4693aba94a45cc073188df4d67175 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* iwinfo: update to latest Git HEADChristian Marangi2023-01-101-3/+3
| | | | | | | c7b420a devices: add Qualcomm Atheros QCN6024/9024/9074 cards 5914d71 iwinfo: devices: add Qualcomm Atheros IPQ8074 WiSoC Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ucode-mod-bpf: add new package for a ucode libbpf bindingFelix Fietkau2023-01-092-0/+854
| | | | | | | | | | The bpf plugin provides functionality for loading and interacting with eBPF modules. It allows loading full modules and pinned maps/programs and supports interacting with maps and attaching programs as tc classifiers. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ucode: update to the latest versionFelix Fietkau2023-01-091-3/+3
| | | | | | | | | 34cfbb922c96 README.md: various spelling and documentation fixes ff32355ea645 build: make rtnl/nl80211 depend on linux instead of !APPLE c0e413c21f7b include: add uc_fn_thisval() 1e4d20932646 Merge pull request #134 from nbd168/thisval Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rtl8812au-ct: Ignore address errorsHauke Mehrtens2023-01-091-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GCC 12.2.0 shows these error messages: ```` rtl8812au-ct-2021-11-07-39df5596/core/rtw_sta_mgt.c: In function 'rtw_mfree_stainfo': rtl8812au-ct-2021-11-07-39df5596/core/rtw_sta_mgt.c:210:24: error: the comparison will always evaluate as 'true' for the address of 'lock' will never be NULL [-Werror=address] 210 | if(&psta->lock != NULL) | ^~ In file included from rtl8812au-ct-2021-11-07-39df5596/include/drv_types.h:109, from rtl8812au-ct-2021-11-07-39df5596/core/rtw_sta_mgt.c:22: rtl8812au-ct-2021-11-07-39df5596/include/sta_info.h:95:17: note: 'lock' declared here 95 | _lock lock; | ^~~~ ```` ```` CC [M] rtl8812au-ct-2021-11-07-39df5596/os_dep/linux/ioctl_cfg80211.o rtl8812au-ct-2021-11-07-39df5596/os_dep/linux/ioctl_cfg80211.c: In function 'cfg80211_rtw_scan': rtl8812au-ct-2021-11-07-39df5596/os_dep/linux/ioctl_cfg80211.c:2176:32: warning: the comparison will always evaluate as 'true' for the address of 'ssid' will never be NULL [-Waddress] 2176 | if(ssids->ssid != NULL | ^~ In file included from rtl8812au-ct-2021-11-07-39df5596/include/osdep_service_linux.h:88, from rtl8812au-ct-2021-11-07-39df5596/include/osdep_service.h:41, from rtl8812au-ct-2021-11-07-39df5596/include/drv_types.h:32, from rtl8812au-ct-2021-11-07-39df5596/os_dep/linux/ioctl_cfg80211.c:22: /home/hauke/openwrt/openwrt/staging_dir/target-mips_24kc_musl/usr/include/mac80211/net/cfg80211.h:2364:12: note: 'ssid' declared here 2364 | u8 ssid[IEEE80211_MAX_SSID_LEN]; | ^~~~ ```` ```` CC [M] rtl8812au-ct-2021-11-07-39df5596/hal/OUTSRC/phydm_debug.o rtl8812au-ct-2021-11-07-39df5596/hal/OUTSRC/phydm_debug.c: In function 'phydm_cmd_parser': rtl8812au-ct-2021-11-07-39df5596/hal/OUTSRC/phydm_debug.c:873:28: warning: the comparison will always evaluate as 'true' for the pointer operand in 'input + ((sizetype)i + 1) * 16' must not be NULL [-Waddress] 873 | if(input[i+1]) { | ^~~~~ rtl8812au-ct-2021-11-07-39df5596/hal/OUTSRC/phydm_debug.c:894:28: warning: the comparison will always evaluate as 'true' for the pointer operand in 'input + ((sizetype)i + 1) * 16' must not be NULL [-Waddress] 894 | if(input[i+1]) { | ^~~~~ ```` This one was only seen on the rockchip/armv8 target: ```` CC [M] rtl8812au-ct-2021-11-07-39df5596/core/rtw_br_ext.o In function '__nat25_add_pppoe_tag', inlined from 'nat25_db_handle' at rtl8812au-ct-2021-11-07-39df5596/core/rtw_br_ext.c:909:10: rtl8812au-ct-2021-11-07-39df5596/core/rtw_br_ext.c:118:9: error: 'memcpy' reading between 2052 and 9220 bytes from a region of size 40 [-Werror=stringop-overread] 118 | memcpy((unsigned char *)ph->tag, tag, data_len); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ rtl8812au-ct-2021-11-07-39df5596/core/rtw_br_ext.c: In function 'nat25_db_handle': rtl8812au-ct-2021-11-07-39df5596/core/rtw_br_ext.c:878:63: note: source object 'tag_buf' of size 40 878 | unsigned char tag_buf[40]; | ^~~~~~~ ```` Most of them are looking like real errors to me, but some fixes need a deeper understanding of the driver and probably bigger changes to the driver. Ignore these error messages for now. It would be nice if someone would fix them. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uqmi: Ignore wrong maybe-uninitialized and dangling-pointer errorHauke Mehrtens2023-01-091-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GCC 12.2.0 shows this false positive error message: ```` uqmi-2022-05-04-56cb2d40/dev.c: In function 'qmi_request_wait': uqmi-2022-05-04-56cb2d40/dev.c:217:23: error: storing the address of local variable 'complete' in '*req.complete' [-Werror=dangling-pointer=] 217 | req->complete = &complete; | ~~~~~~~~~~~~~~^~~~~~~~~~~ uqmi-2022-05-04-56cb2d40/dev.c:208:14: note: 'complete' declared here 208 | bool complete = false; | ^~~~~~~~ uqmi-2022-05-04-56cb2d40/dev.c:208:14: note: 'req' declared here cc1: all warnings being treated as errors ```` and this one: ```` In file included from uqmi-2022-05-04-56cb2d40/commands.c:28: In function 'blobmsg_close_table', inlined from 'cmd_nas_get_cell_location_info_cb' at /home/haukeuqmi-2022-05-04-56cb2d40/commands-nas.c:897:4: /usr/include/libubox/blobmsg.h:256:9: error: 'c' may be used uninitialized [-Werror=maybe-uninitialized] 256 | blob_nest_end(buf, cookie); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from uqmi-2022-05-04-56cb2d40/commands.c:169: uqmi-2022-05-04-56cb2d40/commands-nas.c: In function 'cmd_nas_get_cell_location_info_cb': uqmi-2022-05-04-56cb2d40/commands-nas.c:713:15: note: 'c' was declared here 713 | void *c, *t, *cell, *freq; | ^ cc1: all warnings being treated as errors ```` Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* elfutils: Ignore wrong use-after-free errorHauke Mehrtens2023-01-091-1/+1
| | | | | | | | | | | | | | | | | | | GCC 12.2.0 shows this false positive error message: ```` In function 'bigger_buffer', inlined from '__libdw_gunzip' at gzip.c:374:12: gzip.c:96:9: error: pointer may be used after 'realloc' [-Werror=use-after-free] 96 | b = realloc (state->buffer, more -= 1024); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gzip.c:94:13: note: call to 'realloc' here 94 | char *b = realloc (state->buffer, more); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors ```` GCC bug report: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=104069 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* busybox: update to 1.36.0Hannu Nyman2023-01-078-54/+120
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update busybox to version 1.36.0 * refresh patches (remove the backported upstream fix) * refresh config Config refresh: Refresh commands, run after busybox is first built once: cd package/utils/busybox/config/ ../convert_menuconfig.pl ../../../../build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/busybox-default/busybox-1.36.0 cd .. ./convert_defaults.pl ../../../build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/busybox-default/busybox-1.36.0/.config > Config-defaults.in Manual edits needed after config refresh: * Config-defaults.in: OpenWrt config symbol IPV6 logic applied to BUSYBOX_DEFAULT_FEATURE_IPV6 * Config-defaults.in: OpenWrt config TARGET_bcm53xx logic applied to BUSYBOX_DEFAULT_TRUNCATE (commit 547f1ec) * Config-defaults.in: OpenWrt logic applied to BUSYBOX_DEFAULT_LOGIN_SESSION_AS_CHILD (commit dc92917) * Config-defaults.in: correct the default ports that get reset BUSYBOX_DEFAULT_FEATURE_HTTPD_PORT_DEFAULT 80 BUSYBOX_DEFAULT_FEATURE_TELNETD_PORT_DEFAULT 23 * config/editors/Config.in: Add USE_GLIBC dependency to BUSYBOX_CONFIG_FEATURE_VI_REGEX_SEARCH (commit f141090) * config/shell/Config.in: change at "Options common to all shells" the conditional symbol SHELL_ASH --> BUSYBOX_CONFIG_SHELL_ASH (discussion in http://lists.openwrt.org/pipermail/openwrt-devel/2021-January/033140.html Apparently our script does not see the hidden option while prepending config options with "BUSYBOX_CONFIG_" which leads to a missed dependency when the options are later evaluated.) * Edit a few Config.in files by adding quotes to sourced items in config/Config.in, config/networking/Config.in and config/util-linux/Config.in (commit 1da014f) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* util-linux: update to 2.38.1Linhui Liu2023-01-074-66/+3
| | | | | | | | | | | | Release Notes: https://cdn.kernel.org/pub/linux/utils/util-linux/v2.38/v2.38.1-ReleaseNotes Remove upstreamed: - 010-meson-typo.patch - 020-meson-fix-compilation-without-systemd.patch - 110-meson-fix-when-HAVE_CLOCK_GETTIME-is-set.patch Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* mt76: add stand-alone MT7622 firmware packageShiji Yang2023-01-071-4/+16
| | | | | | | | | Add a separate firmware package to avoid installing the MT7615 firmware on all MT7622 target devices by default. Now we only add MT7615 firmware packages for devices that use MT7615E. This commit also removes the explicit dependency on kmod-mt7615e to refine the package dependency. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mt76: add stand-alone MT7915 firmware packageShiji Yang2023-01-071-1/+8
| | | | | | | | | The mt7915e driver supports MT7915, MT7916 and MT7986 chips. And Only MT7915 series chips need the MT7915 firmware. To save storage, extract them from the common code package and create a new package to provide the firmware. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mt76: remove unnecessary dependency from mt7915eShiji Yang2023-01-071-1/+1
| | | | | | | | | The kmod-mt7615-common package does not contain any code that related to mt7915e Wi-Fi6 driver, so remove it. Tested on ramips/mt7621: SIM SIMAX1800T Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* zyxel-bootconfig: clean up scriptDavid Bauer2023-01-071-3/+1
| | | | | | Drop unused variable and fix identation. Signed-off-by: David Bauer <mail@david-bauer.net>
* tcpdump: update to 4.99.2Nick Hainke2023-01-063-36/+37
| | | | | | | | | | | | | | | | | | | | | | | Update to latest version. For release information look into CHANGES file [0]. Automatically refreshed: - 001-remove_pcap_debug.patch Manually refreshed: - 100-tcpdump_mini.patch old ipkg sizes: 316554 bin/packages/mips_24kc/base/tcpdump_4.99.1-1_mips_24kc.ipk 141457 bin/packages/mips_24kc/base/tcpdump-mini_4.99.1-1_mips_24kc.ipk new ipkg sizes: 318089 bin/packages/mips_24kc/base/tcpdump_4.99.2-1_mips_24kc.ipk 141941 bin/packages/mips_24kc/base/tcpdump-mini_4.99.2-1_mips_24kc.ipk [0] - https://github.com/the-tcpdump-group/tcpdump/blob/master/CHANGES Signed-off-by: Nick Hainke <vincent@systemli.org>
* libpcap: update to 1.20.2Nick Hainke2023-01-065-46/+20
| | | | | | | | | | | | | | | | | | | | | | | | | A huge rewrite in libpcap was introduced by dc14a7babca1 ("rpcap: have the server tell the client its byte order.") [0]. The patch "201-space_optimization.patch" does not apply at all anymore. So remove it. Refresh: - 100-no-openssl.patch - 102-skip-manpages.patch Update the "300-Add-support-for-B.A.T.M.A.N.-Advanced.patch" with latest PR [1]. old ipkg size: 90964 bin/packages/mips_24kc/base/libpcap1_1.10.1-5_mips_24kc.ipk new ipkg size: 93340 bin/packages/mips_24kc/base/libpcap1_1.10.2-1_mips_24kc.ipk [0] - https://github.com/the-tcpdump-group/libpcap/commit/dc14a7babca1471809bee6872539ff836937840e [1] - https://github.com/the-tcpdump-group/libpcap/pull/980 Signed-off-by: Nick Hainke <vincent@systemli.org>
* nftables: update to 1.0.6Nick Hainke2023-01-062-27/+4
| | | | | | | | | | | | | | | | | | Remove upstreamed patches: - 0001-fix-nft.patch Upstream switched to "tar.xz" archives. old ipkg size: 273678 bin/packages/mips_24kc/base/nftables-json_1.0.5-2_mips_24kc.ipk new ipkg size: 271624 bin/packages/mips_24kc/base/nftables-json_1.0.6-1_mips_24kc.ipk Release Information: https://netfilter.org/projects/nftables/files/changes-nftables-1.0.6.txt Signed-off-by: Nick Hainke <vincent@systemli.org>
* base-files: rework mtd_get_mac_text()Michael Pratt2023-01-061-11/+5
| | | | | | | | | | | | | | It's necessary to be able to specify the length for MAC addresses that are stored in flash, for example, in a case where it is stored without any delimiter. Let both offset and length have default values. Add a sanity check related to partition size. Also, clean up syntax and unnecessary lines. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ncurses: update to 6.4Linhui Liu2023-01-056-21/+21
| | | | | | Update to the latest released version. Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* ramips: add basic support for tp-link er605-v2Nikolay Martynov2023-01-041-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a MT7621-based device with 128MB NAND flash, 256MB RAM, and a USB port. The board has headers to attach console. In order for them to work two solder bridges near those pads need to be made. The defice has the following partition table: ``` 0x000000000000-0x000000080000 : "u-boot" 0x000000080000-0x000000100000 : "u-boot-env" 0x000000100000-0x000000140000 : "factory" 0x000000140000-0x000007e00000 : "firmware" 0x000007e00000-0x000008000000 : "panic-ops" ``` `firmware` partition contains UBI volumes. Unfortunately I accidentally wiped partition and I no longer have access to it. `firmware` partition contains 'secondary' U-Boot which is run by 'first' u-boot. It also contains various configuration partitions that include device info and MAC address. There also seems to be 'primary' and 'backup' set of 'main' volumes. U-boot has `mtkupgrade` command that just overrides data on firmware partitions. Firmware file provided by TP-Link cannot be used with that command. U-boot also has 'recovery' http server. Unfortunately I was not able to make it work with manufacturer's firmware. Manufacturer's firmware essentially contains multiple UBI volumes along with 'partition table'. Unfortunately I no longer can properly run manufacturer's firmware so I cannot at the moment try to a support for building 'factory' images. This patch adds support for initramfs image as well as sysupgrade image. This seems to be pretty standard MT7621 board otherwise. Things that work: * network * leds * usb * factory MAC detection Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
* bridger: update to the latest versionFelix Fietkau2023-01-031-3/+3
| | | | | | | | | def7755c459d add missing copyright headers f68307fd96d7 add hairpin mode support 9ee8f433ba4e nl: do not pass NDA_VLAN with vid=0 978c1f9eed07 add support for the bridge port isolated flag Signed-off-by: Felix Fietkau <nbd@nbd.name>
* treewide: Trigger reinstall of all wolfssl dependenciesHauke Mehrtens2023-01-014-4/+4
| | | | | | | | The ABI of the wolfssl library changed a bit between version 5.5.3 and 5.5.4. This release update will trigger a rebuild of all packages which are using wolfssl to make sure they are adapted to the new ABI. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wolfssl: update to 5.5.4-stableNick Hainke2023-01-013-36/+3
| | | | | | | | | | | | | Remove upstreamed: - 001-Fix-enable-devcrypto-build-error.patch Refresh patch: - 100-disable-hardening-check.patch Release notes: https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.4-stable Signed-off-by: Nick Hainke <vincent@systemli.org>
* tfa-layerscape: Use trusted-firmware-a.mkHauke Mehrtens2022-12-311-70/+55
| | | | | | | | This converts the trusted firmware arm build Makefile to make use of the common trusted-firmware-a.mk file. This also fixes the build with binutils 2.39. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arm-trusted-firmware-mvebu: Use host flags for cryptest compilationHauke Mehrtens2022-12-312-0/+15
| | | | | | | | | Without these changes it used the system LDFLAGS for the compilation of the cryptopp library. This does not always work when we add "-no-warn-rwx-segments" which is done to support binutils 2.39 inside of OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arm-trusted-firmware-sunxi: Use common trusted-firmware-a.mkHauke Mehrtens2022-12-312-39/+27
| | | | | | | Make use of the definitions from trusted-firmware-a.mk to build the Trusted firmware arm. This fixes the build with binutils 2.39. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* base-files: stage2: add 'tail' to sysupgrade environmentTony Ambardar2022-12-311-1/+1
| | | | | | | This is used to access footer data in firmare files, and is simpler and less error-prone than using 'dd' with calculated offsets. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ipq40xx: fix up Linksys WHW01 board name, device definitionTony Ambardar2022-12-311-1/+1
| | | | | | | | | | | | | | Update the board name defined in DTS to match online documentation and the name encoded into factory firmware. This helps supports flashing firmware factory images using 'sysupgrade'. Original WHW01 device definition assumes the rootfs IMAGE_SIZE is 33 MB instead of the correct 74 MB, and defines factory images which include extra adjustments/padding that do not match OEM factory images and may cause problems flashing. Update image size and build recipe to fix these. Suggested-by: Wyatt Martin <wawowl@gmail.com> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* mbedtls: update to version 2.28.2Hauke Mehrtens2022-12-312-6/+6
| | | | | | | | | | | | | | | | | | | Changelog: https://github.com/Mbed-TLS/mbedtls/releases/tag/v2.28.2 This release of Mbed TLS provides bug fixes and minor enhancements. This release includes fixes for security issues. Fixes the following CVEs: * CVE-2022-46393: Fix potential heap buffer overread and overwrite in DTLS if MBEDTLS_SSL_DTLS_CONNECTION_ID is enabled and MBEDTLS_SSL_CID_IN_LEN_MAX > 2 * MBEDTLS_SSL_CID_OUT_LEN_MAX. * CVE-2022-46392: An adversary with access to precise enough information about memory accesses (typically, an untrusted operating system attacking a secure enclave) could recover an RSA private key after observing the victim performing a single private-key operation if the window size used for the exponentiation was 3 or smaller. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: fix receiving multicast packets on multiple sta interfacesFelix Fietkau2022-12-301-26/+30
| | | | | | Also fix MLO sta sdata link initialization Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2022-12-301-3/+3
| | | | | | | | | | | | 2cffe0c44e62 treewide: correctly apply IFNAMSIZ limit 96bcbb2e4eb6 wireless: allow set_retry ubus notify command to trigger a wdev restart a2e8cd75dbf6 wireless: add support for disabling multicast-to-unicast per virtual interface e9f44189ade7 system: move netdev types to system-linux.c where they are used a3fab0119ef1 utils: include utils.h last 7ce73fc16765 vlandev: propagate topology changes 81c1fbcba2f2 device: fix vlan device issues with disappearing lower devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: drop redmi-ax6000 variant with modified envChuanhong Guo2022-12-301-1/+0
| | | | | | | | | | | | | | | | | | | This variant uses xiaomi factory u-boot and modified u-boot-env & bootcmd. By modifying uboot-env, the xiaomi firmware recovery provided in the vendor u-boot doesn't work anymore. It's possible to put u-boot into a state where it refuese to take any serial input. If the u-boot is in this state, users can't restore their firmware without taking the flash off the board. We now have a -stock variant where the vendor u-boot is used in a way that xiaomi firmware recovery still works, and a -ubootmod variant where we get rid of all xiaomi components, have more usable space and no uart console lock. These two should cover all use cases and we don't need this variant anymore. Drop this redmi-ax6000 variant. Existing users of this variant should perform a u-boot mod or restore to the -stock layout. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* tree-wide: Do not use package librt and libpthreadHauke Mehrtens2022-12-296-15/+5
| | | | | | | | | | | The libraries libpthread, libdl, libutil, libanl have been integrated into the libc library in version 2.34. it is not needed to explicitly link them any more. Most of the functions have been moved from the librt.so into libc.so some time ago already. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* linux-firmware: disable strippingRobert Marko2022-12-291-1/+4
| | | | | | | | | | | It has been brought to my attention that recently added WCN6855 firmware is broken as it is getting stripped during building due to being 2 ELF binaries. I am sure WCN6750 and any other ELF binaries are having the same issue, so since stripping firmware binaries is clearly unwanted disable it. Fixes: b4d3694f81f4 ("linux-firmware: package ath11k consumer cards firmware") Signed-off-by: Robert Marko <robimarko@gmail.com>
* uboot-mediatek: add support for Xiaomi Redmi Router AX6000Furong Xu2022-12-293-0/+412
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot flash instructions: 0. OpenWrt U-Boot does not support stock layout, it comes with recovery boot support, automatic tftp recovery and never blocks UART. A new flash layout is introduced, we call it OpenWrt U-Boot layout, stock flash layout and the old OpenWrt layout are not supported. During the whole flash procedure, please do not reboot or power off unless requested explicitly, or you will break your device. 1. Your device should already running OpenWrt. If not, follow the instructions to flash OpenWrt: https://github.com/openwrt/openwrt/pull/11115 2. Backup BL2 Nvram Bdata Factory and FIP in case you break something or in case you want to go back to stock firmware one day. cat /dev/mtdblock0 > /tmp/BL2.bin cat /dev/mtdblock1 > /tmp/Nvram.bin cat /dev/mtdblock2 > /tmp/Bdata.bin cat /dev/mtdblock3 > /tmp/Factory.bin cat /dev/mtdblock4 > /tmp/FIP.bin And save all whose bin files to somewhere safe. Then backup your configurations, since ubiformat for entire mtd device is required to create new ubootenv volume for OpenWrt U-Boot. 3. Run the following cmd to boot into an initramfs with the new OpenWrt U-Boot layout that expand ubi partion to the end of flash: ubiformat /dev/mtd7 -y -f /tmp/ax6000-ubootmod-initramfs-factory.ubi 4. After boot into initramfs, check mtd partion info. The ubi partion should be mtd5 root@OpenWrt:~# cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 BL2 mtd1: 00040000 00020000 Nvram mtd2: 00040000 00020000 Bdata mtd3: 00200000 00020000 Factory mtd4: 00200000 00020000 FIP mtd5: 07a80000 00020000 ubi 5. Load kmod-mtd-rw to temporarily make the bootloader partions writable. The kmod-mtd-rw is from the feeds, it is not packed in initramfs-factory by default. To install kmod-mtd-rw via opkg: opkg update && opkg install kmod-mtd-rw Or, download kmod-mtd-rw.ipk from OpenWrt server and install it manually e.g: https://downloads.openwrt.org/snapshots/targets/mediatek/filogic/kmods/ Select your OpenWrt release version and kernel version accordingly. Load kmod-mtd-rw: insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1 6. Run the following cmd to clean all pending crash dumps in pstore, or OpenWrt U-Boot may boot into NAND recovery or tftp recovery. rm -f /sys/fs/pstore/* 7. Format ubi and create new ubootenv volume: ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5 ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB 8. This is optional. Skip this if you do not want to have NAND recovery boot feature offered by OpenWrt U-Boot. Don't worry, you always have automatic tftp recovery feature enabled. ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB ubiupdatevol /dev/ubi0_2 /tmp/ax6000-ubootmod-initramfs-recovery.itb 9. Now, flash new U-Boot. Bye-bye ugly stock U-Boot. mtd write /tmp/ax6000-ubootmod-preloader.bin BL2 mtd write /tmp/ax6000-ubootmod-bl31-uboot.fip FIP 10. Flash the squashfs-sysupgrade.bin as usual: sysupgrade -n /tmp/ax6000-ubootmod-squashfs-sysupgrade.itb Enjoy! Signed-off-by: Furong Xu <xfr@outlook.com>
* linux-firmware: ath11k: add symlink for WCN6855 hw2.1Robert Marko2022-12-282-1/+2
| | | | | | | | WCN6855 exists in 2 HW revisions, but both use the same FW so upstream just has a symlink for hw2.1 to hw2.0 that I forgot to make. Fixes: b4d3694f81f4 ("linux-firmware: package ath11k consumer cards firmware") Signed-off-by: Robert Marko <robimarko@gmail.com>
* linux-firmware: update to 20221214Nick Hainke2022-12-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: f3c283e amdgpu: updated navi10 firmware for amd-5.4 ba115d4 amdgpu: updated yellow carp firmware for amd-5.4 b8aba70 amdgpu: updated raven2 firmware for amd-5.4 2b21c5e amdgpu: updated raven firmware for amd-5.4 fc9a1c9 amdgpu: updated PSP 13.0.8 firmware for amd-5.4 7d43336 amdgpu: updated GC 10.3.7 RLC firmware for amd-5.4 c089dab amdgpu: updated vega20 firmware for amd-5.4 75e3494 amdgpu: updated PSP 13.0.5 firmware for amd-5.4 31c5734 amdgpu: add VCN 4.0.0 firmware for amd-5.4 a735158 amdgpu: add SMU 13.0.0 firmware for amd-5.4 0bef6bb amdgpu: Add SDMA 6.0.0 firmware for amd-5.4 bb56d1a amdgpu: add PSP 13.0.0 firmware for amd-5.4 e32209f amdgpu: add GC 11.0.0 firmware for amd-5.4 613db81 amdgpu: add DCN 3.2.0 firmware for amd-5.4 1fc8f6c amdgpu: updated vega10 firmware for amd-5.4 2257447 amdgpu: updated beige goby firmware for amd-5.4 6aa0023 amdgpu: updated dimgrey cavefish firmware for amd-5.4 dd1225a amdgpu: updated vangogh firmware for amd-5.4 5cb010e amdgpu: updated picasso firmware for amd-5.4 edf9699 amdgpu: updated navy flounder firmware for amd-5.4 b7e83d9 amdgpu: updated green sardine firmware for amd-5.4 f820cc3 amdgpu: updated sienna cichlid firmware for amd-5.4 b77f539 amdgpu: updated arcture firmware for amd-5.4 dccfdf1 amdgpu: updated navi14 firmware for amd-5.4 5d1af6d amdgpu: updated renoir firmware for amd-5.4 13b9c94 amdgpu: updated navi12 firmware for amd-5.4 e9b8357 amdgpu: updated aldebaran firmware for amd-5.4 b4af754 sr150 : Add NXP SR150 UWB firmware 0707b2f brcm: add/update firmware files for brcmfmac driver 16c9630 rtl_bt: Update RTL8821C BT(USB I/F) FW to 0x75b8_f098 80ed874 amdgpu: update sdma_5.2.7 firmware 32d8681 QCA: Add Bluetooth firmware for WCN785x This commit will add required Bluetooth firmware files for QCA WCN785x. The image version is 2.0.0-00515. cdf9499 linux-firmware: update firmware for MT7916 685ea4d linux-firmware: update firmware for MT7915 7f6279b i915: Add DMC v2.08 for DG2 391fb47 amdgpu: update green sardine DMCUB firmware de854c9 i915: Add DMC v2.10 for MTL daff404 linux-firmware: update firmware for MT7986 70494e3 linux-firmware: update firmware for mediatek bluetooth chip (MT7921) 750c0dc linux-firmware: update firmware for MT7921 WiFi device Signed-off-by: Nick Hainke <vincent@systemli.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 05:08:05 +0000