aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
...
* ltq-deu: convert blkcipher to skcipherDaniel Kestrel2022-01-063-464/+413
| | | | | | | | | Convert blkcipher to skcipher for the synchronous versions of AES, DES and ARC4. The Block Cipher API was depracated for a while and was removed with Linux 5.5. So switch this driver to the skcipher API. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: set correct control register for AESDaniel Kestrel2022-01-061-1/+1
| | | | | | | | | | | | Some devices initialize AES during boot and AES works out of the box and the correct endianess is set. NDC means (No Danube Compatibility Mode) and the endianess setting has no effect if its set to 0. NDC 0: OFF ENDI bit cannot be written as in Danube To make it work for other devices, the NDC control register needs to be set to 1. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: make cipher/digest usable by opensslMathias Kresin2022-01-059-28/+28
| | | | | | | | | | OpenSSL with cryptdev support uses the data encryption unit (DEU) driver for hard accelerated processing of ciphers/digests, if the flag CRYPTO_ALG_KERN_DRIVER_ONLY is set. Signed-off-by: Mathias Kresin <dev@kresin.me> [fix commit title prefix] Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: aes-ctr: process all input dataMathias Kresin2022-01-051-31/+21
| | | | | | | | | | | | | | | | | | | | | | | Even if the minimum blocksize is set to 16 (AES_BLOCK_SIZE), the crypto manager tests pass 499 bytes of data to the aes-ctr encryption, from which only 496 bytes are actually encrypted. Reading the comment regarding the minimum blocksize, it only states that it's the "smallest possible unit which can be transformed with this algorithm". Which doesn't necessarily mean, the data have to be a multiple of the minimal blocksize. All kernel hardware crypto driver enforce a minimum blocksize of 1, which perfect fine works for the lantiq data encryption unit as well. Lower the blocksize limit to 1, to process not padded data as well. In AES for processing the remaining bytes, uninitialized pointers were used. This patch fixes using uninitialized pointers and wrong offsets. Signed-off-by: Mathias Kresin <dev@kresin.me> [fix commit title prefix] Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: aes: do not read/write behind bufferMathias Kresin2022-01-051-12/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When handling non-aligned remaining data (not padded to 16 byte [AES_BLOCK_SIZE]), a full 16 byte block is read from the input buffer and written to the output buffer after en-/decryption. While code already assumes that an input buffer could have less than 16 byte remaining, as it can be seen by the code zeroing the remaining bytes till AES_BLOCK_SIZE, the full AES_BLOCK_SIZE is read. An output buffer size of a multiple of AES_BLOCK_SIZE is expected but never validated. To get rid of the read/write behind buffer, use a temporary buffer when dealing with not padded data and only write as much bytes to the output as we read. Do not memcpy directly to the register, to make used of the endian swap macro and to trigger the crypto start operator via the ID0R to trigger the register. Since we might need an endian swap for the output in future, use a temporary buffer for the output as well. The issue could not be observed so far, since all caller of ifx_deu_aes will ignore the padded (remaining) data. Considering that the minimum blocksize for the algorithm is set to AES_BLOCK_SIZE, the behaviour could be called expected. Signed-off-by: Mathias Kresin <dev@kresin.me> [fix commit title prefix] Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: init des/aes before registering crpyto algorithmsMathias Kresin2022-01-052-3/+2
| | | | | | | | | | | | | | The crypto algorithms are registered and available to the system before the chip is actually powered on and the generic parameter for the DEU behaviour set. The issue can mainly be observed if the crypto manager tests are enabled in the kernel config. The crypto manager test run directly after an algorithm is registered. Signed-off-by: Mathias Kresin <dev@kresin.me> [fix commit title prefix] Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* lua: add HOST_FPIC for host buildsPaul Spooren2022-01-032-4/+4
| | | | | | | | | Compiling without fPIC causes linking issues for packages using liblua. Add $(HOST_FPIC) to host builds for both lua and lua5.3. Suggested-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Paul Spooren <mail@aparcar.org>
* binutils: fix compiling with arch-based distrosNick Hainke2022-01-021-2/+2
| | | | | | | | | | | | | | | | | | | Arch Linux users have encountered problems with packages that have a dependency on binutils. This error happens when libtool is doing: libtool: relink: ... So change PKG_FIXUP to "patch-libtool". Fixes error in the form of: libtool: install: error: relink `libctf.la' with the above command before installing it Upstream Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28545 OpenWrt Bug: https://bugs.openwrt.org/index.php?do=details&task_id=4149 Acked-by: John Audia <graysky@archlinux.us> Signed-off-by: Nick Hainke <vincent@systemli.org>
* openssl: bump to 1.1.1mEneas U de Queiroz2022-01-013-14/+7
| | | | | | | | | | | | | This is a bugfix release. Changelog: *) Avoid loading of a dynamic engine twice. *) Fixed building on Debian with kfreebsd kernels *) Prioritise DANE TLSA issuer certs over peer certs *) Fixed random API for MacOS prior to 10.12 Patches were refreshed. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* hostapd: refresh patchsetNick Hainke2021-12-314-11/+11
| | | | | | | | | | | | | | Recently the hostapd has undergone many changes. The patches were not refreshed. Refreshed with make package/hostapd/{clean,refresh} Refreshed: - 380-disable_ctrl_iface_mib.patch - 600-ubus_support.patch - 700-wifi-reload.patch - 720-iface_max_num_sta.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* nftables: allow quoted string in flowtable_expr_memberStijn Tintel2021-12-312-1/+45
| | | | | | | This is required to be able to use flow offloading on devices with ifnames that start with a digit, like 6in4-wan6. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* utils/px5g-wolfssl: make selfsigned certicates compatible with chromiumSergey V. Lobanov2021-12-292-1/+21
| | | | | | | | | | | | | | Chromium based web-browsers (version >58) checks x509v3 extended attributes. If this check fails then chromium does not allow to click "Proceed to ... (unsafe)" link. This patch add three x509v3 extended attributes to self-signed certificate: 1. SAN (Subject Alternative Name) (DNS Name) = CN (common name) 2. Key Usage = Digital Signature, Non Repudiation, Key Encipherment 3. Extended Key Usage = TLS Web Server Authentication SAN will be added only if CONFIG_WOLFSSL_ALT_NAMES=y Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
* libs/wolfssl: add SAN (Subject Alternative Name) supportSergey V. Lobanov2021-12-292-2/+7
| | | | | | | | | x509v3 SAN extension is required to generate a certificate compatible with chromium-based web browsers (version >58) It can be disabled via unsetting CONFIG_WOLFSSL_ALT_NAMES Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
* kirkwood: add support for NETGEAR ReadyNAS Duo v2Pawel Dembicki2021-12-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NETGEAR ReadyNAS Duo v2 is a NAS based on Marvell kirkwood SoC. Specification: - Processor Marvell 88F6282 (1.6 GHz) - 256MB RAM - 128MB NAND - 1x GBE LAN port (PHY: Marvell 88E1318) - 1x USB 2.0 - 2x USB 3.0 - 2x SATA - 3x button - 5x leds - serial on J5 connector accessible from rear panel (115200 8N1) (VCC,TX,RX,GND) (3V3 LOGIC!) Installation by USB + serial: - Copy initramfs image to fat32 usb drive - Connect pendrive to USB 2.0 front socket - Connect serial console - Stop booting in u-boot - Do: usb reset setenv bootargs 'console=ttyS0,115200n8 earlyprintk' setenv bootcmd 'nand read.e 0x1200000 0x200000 0x600000;bootm 0x1200000' saveenv fatload usb 0:1 0x1200000 openwrt-kirkwood-netgear_readynas-duo-v2-initramfs-uImage bootm 0x1200000 - copy sysupgrade image via ssh. - run sysupgrade Installation by TFTP + serial: - Setup TFTP server and copy initramfs image - Connect serial console - Stop booting in u-boot - Do: setenv bootargs 'console=ttyS0,115200n8 earlyprintk' setenv bootcmd 'nand read.e 0x1200000 0x200000 0x600000;bootm 0x1200000' saveenv setenv serverip 192.168.1.1 setenv ipaddr 192.168.1.2 tftpboot 0x1200000 openwrt-kirkwood-netgear_readynas-duo-v2-initramfs-uImage bootm 0x1200000 - copy sysupgrade image via ssh. - run sysupgrade Known issues: - Power button and PHY INTn pin are connected to the same GPIO. It causes that every network restart button is pressed in system. As workaround, button is used as regular BTN_1. For more info please look at file: RND_5.3.13_WW.src/u-boot/board/mv_feroceon/mv_hal/usibootup/usibootup.c from Netgear GPL sources. Tested-by: Raylynn Knight <rayknight@me.com> Tested-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* packages: kernel: add i2c hwmon g762 kmod packagePawel Dembicki2021-12-291-0/+15
| | | | | | | This patch adds kernel module for Global Mixed-mode Technology Inc G762 and G763 fan speed PWM controller chips. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* tfa-layerscape: fix build on systems without openssl headersHauke Mehrtens2021-12-281-1/+2
| | | | | | | | | | | | | | | | | | The build fails when the openssl/sha.h header file is not installed on the host system. Fix this by setting the HOSTCCFLAGS variable to the OpenWrt HOST_CFLAGS variable, without setting this the include paths and other modifications in the host flags done by OpenWrt will be ignored by the build. This fixes the following build problem: gcc -c -D_GNU_SOURCE -D_XOPEN_SOURCE=700 -Wall -Werror -pedantic -std=c99 -O2 -I../../include/tools_share fiptool.c -o fiptool.o In file included from fiptool.h:16, from fiptool.c:19: fiptool_platform.h:19:11: fatal error: openssl/sha.h: No such file or directory 19 | # include <openssl/sha.h> | ^~~~~~~~~~~~~~~ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* layerscape: restool: Remove build of manpagesHauke Mehrtens2021-12-281-0/+18
| | | | | | | | The build of the manpages needs the pandoc tool, this is not in the minimal requirements of OpenWrt, just remove the build of the restool manpage. This fixes the build on systems without pandoc like the OpenWrt build bots. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: add fallback for WPS on stationsRaphaël Mélotte2021-12-271-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Up to now the WPS script triggered WPS on the stations only if it could not trigger it successfully on any hostapd instance. In a Multi-AP context, there can be a need (to establish a new wireless backhaul link) to trigger WPS on the stations, regardless of whether there is already a hostapd instance configured or not. The current script makes it impossible, as if hostapd is running and configured, WPS would always be triggered on hostapd only. To allow both possibilities, the following changes are made: - Change the "pressed" action to "release", so that we can make use of the "$SEEN" variables (to know for how long the button was pressed). - If the button is pressed for less than 3 seconds, keep the original behavior. - If the button is pressed for 3 seconds or more, trigger WPS on the stations, regardless of the status of any running hostapd instance. - Add comments explaining both behaviors. - While at it, replace the usage of '-a' with a '[] && []' construct (see [1]). This gives users a "fallback" mechanism to onboard a device to a Multi-AP network, even if the device already has a configured hostapd instance running. [1]: https://github.com/koalaman/shellcheck/wiki/SC2166 Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
* linux-firmware: amd: consolidate amd's linux-firmware entriesChristian Lamparter2021-12-274-65/+29
| | | | | | | | | | | | this patch consolidates the amd64-microcode (moved to linux-firmware.git, previously this was an extra debian source package download), amdgpu and radeon firmwares into a shared "amd" makefile. With the upcoming 20211216 linux-firmware bump, this will include a microcode update for ZEN 3 CPUs. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* umbim: add missing json_close_object callMartin Schiller2021-12-271-0/+1
| | | | | | | | Otherwise, connection setup may fail due to JSON parse error in netifd. Signed-off-by: Martin Schiller <ms@dev.tdt.de> [Updated commit description] Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: explicitly check for PIN1 stateMartin Schiller2021-12-271-1/+2
| | | | | | | | | | | PIN2 is used only to restrict changing of fixed dialling feature, does not affect network registration. Therefore explicitly check for PIN1 state during connection setup, which is required for network registration. Signed-off-by: Martin Schiller <ms@dev.tdt.de> [Updated commit description] Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: call umbim disconnect in error caseMartin Schiller2021-12-271-1/+13
| | | | | | | | This is needed to properly close the control channel. Otherwise, on the next try the caps call may fail. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* base-files: upgrade: fix efi partitions size calculationJavier Marcet2021-12-271-1/+1
| | | | | | | | | We were missing (not using) the last sector of each partition, compared with the output of gparted. Signed-off-by: Javier Marcet <javier@marcet.info> [moved the dot] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* hostapd: add missing function declarationDavid Bauer2021-12-271-0/+10
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* tcpdump: libpcap: Remove http://www.us.tcpdump.org mirrorHauke Mehrtens2021-12-272-4/+2
| | | | | | | | The http://www.us.tcpdump.org mirror will go offline soon, only use the normal download URL. Reported-by: Denis Ovsienko <denis@ovsienko.info> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* linux-firmware: Update to version 20121216Hauke Mehrtens2021-12-272-9/+3
| | | | | | | | | | | | | | | | | | | | | The rtl8723bs firmware was removed and a symlink to the rtl8723bu firmware was created like it is done in upstream linux-firmware. The following OpenWrt packages are changing: * amdgpu-firmware: Multiple updates and new files * ar3k-firmware: Multiple updates and new files * ath10k-firmware-qca6174: Updated ath10k/QCA6174/hw3.0/board-2.bin * bnx2x-firmware: Added bnx2x-e1-7.13.21.0.fw, bnx2x-e1h-7.13.21.0.fw and bnx2x-e2-7.13.21.0.fw * iwlwifi-firmware-iwl8260c: Updated iwlwifi-8000C-36.ucode * iwlwifi-firmware-iwl8265: Updated iwlwifi-8265-36.ucode * iwlwifi-firmware-iwl9000: Updated iwlwifi-9000-pu-b0-jf-b0-46.ucode * iwlwifi-firmware-iwl9260: Updated iwlwifi-9260-th-b0-jf-b0-46.ucode * r8169-firmware: Updated rtl8153c-1.fw * rtl8723bs-firmware: removed * rtl8723bu-firmware: Added rtlwifi/rtl8723bs_nic.bin symlink * rtl8822ce-firmware: Updated rtw8822c_fw.bin Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: mac80211: refresh patchsetNick Hainke2021-12-241-5/+5
| | | | | | | Refreshed: - 311-mac80211-use-coarse-boottime-for-airtime-fairness-co.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: ath10k: provide a build variant for small RAM devicesNick Hainke2021-12-243-4/+82
| | | | | | | | | | | | | | | | | | | | | | | Based on: 1ac627024de9 ("kernel: ath10k-ct: provide a build variant for small RAM devices") Like described in the ath10k-ct-smallbuffers version, oom-killer gets triggered frequently by devices with small RAM. That change is necessary for many community mesh networks which use ath10k based devices with too little RAM. The -ct driver has been proven unstable if used with 11s meshing and only wave2 chipsets are supporting 11s. Freifunk Berlin is nowadays assembling its firmware-based completely of vanilla OpenWRT with some package additions which are made through the imagebuilder. Therefore we cannot take the approach other freifunk communities have taken to maintain that patch downstream [1]. Other communities consider these devices as broken and that change would pretty much give those devices a second life [2]. [1] - https://git.freifunk-franken.de/mirror/openwrt/commit/450b306e540bc0f2c8a8841bbe4d9612f2b8cdea [2] - https://github.com/freifunk-gluon/gluon/issues/1988#issuecomment-619532909 Signed-off-by: Simon Polack <spolack+git@mailbox.org> Signed-off-by: Nick Hainke <vincent@systemli.org>
* arm-trusted-firmware-bcm63xx: add ATF for Broadcom devicesRafał Miłecki2021-12-241-0/+42
| | | | | | | Right now it includes bcm4908 variant only that is required by BCM4908 family devices with U-Boot. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* hostapd: only attempt to set qos map if supported by the driverFelix Fietkau2021-12-231-0/+12
| | | | | | Fixes issues with brcmfmac Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: keep HE capability after channel switch in AP+STA/MeshArnout Vandecappelle (Essensium/Mind)2021-12-211-1/+2
| | | | | | | The auto-ht option already kept HT and VHT support, but wasn't updated to support HE (11ax). Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* qoriq: add support for WatchGuard Firebox M300Stijn Tintel2021-12-211-0/+19
| | | | | | | | | | | | | | | | | | | | | | | This device is based on NXP's QorIQ T2081QDS board, with a quad-core dual-threaded 1.5 GHz ppc64 CPU and 4GB ECC RAM. The board has 5 ethernet interfaces, of which 3 are connected to the ethernet ports on the front panel. The other 2 are internally connected to a Marvell 88E6171 switch; the other 5 ports of this switch are also connected to the ethernet ports on the front panel. Installation: write the sdcard image to an SD card. Stock U-Boot will not boot, wait for it to fail then run these commands: setenv OpenWrt_fdt image-watchguard-firebox-m300.dtb setenv OpenWrt_kernel watchguard_firebox-m300-kernel.bin setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; ext2load mmc 0:1 $fdtaddr $OpenWrt_fdt; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr - $fdtaddr' saveenv reset The default U-Boot boot entry will now boot OpenWrt from the SD card. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
* qoriq: new targetStijn Tintel2021-12-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Add a new target named "qoriq", that will support boards using PowerPC processors from NXP's QorIQ brand. This doesn't actually add support for any board yet, so that installation instructions can go in the commit message of the commit that adds actual support for a board. Using CONFIG_E6500_CPU here due to the kernel using -mcpu=powerpc64 rather than -mcpu=e5500 when selecting CONFIG_E5500_CPU. The only difference between e5500 and e6500 is AltiVec support, and the kernel checks for it at runtime. Musl will only check at runtime if AltiVec support is disabled at compile-time, so we need to use e5500 in CPU_TYPE to avoid SIGILL. Math emulation (CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED) is required, as neither e5500 nor e6500 implement fsqrt nor fsqrts, and musl hardcodes sqrt and sqrtf to use these ASM instructions on PowerPC64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
* libunwind: add ppc64 supportStijn Tintel2021-12-212-2/+31
| | | | | | | | Backport an upstream patch to make libunwind build on ppc64, and add powerpc64 to the dependencies. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
* nettle: disable assembler on ppc64Stijn Tintel2021-12-211-1/+2
| | | | | | | | | | | | As of version 3.7, Nettle added PowerPC64 assembly for several algorithms. Unfortunately, they cause build to fail due to ABI mismatch: gcm-hash.o: ABI version 1 is not compatible with ABI version 2 output Disable assembler when ppc64 and musl are used for now. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
* openssl: add ppc64 supportStijn Tintel2021-12-213-2/+69
| | | | | | | | | | | | | | Backport an upstream patch that adds support for ELFv2 ABI on big endian ppc64. As musl only supports ELFv2 ABI on ppc64 regardless of endianness, this is required to be able to build OpenSSL for ppc64be. Modify our targets patch to add linux-powerpc64-openwrt, which will use the linux64v2 perlasm scheme. This will probably break the combination ppc64 with glibc, but as we really only want to support musl, this shouldn't be a problem. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mt76: fix Makefile dependencies for mt7921Lorenzo Bianconi2021-12-211-3/+4
| | | | Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
* kernel: drop obsolete kmod-video-core dependenciesStijn Tintel2021-12-201-1/+1
| | | | | | These dependencies do not exist in any of the supported kernel versions. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: drop obsolete symbols from kmod-video-coreStijn Tintel2021-12-201-7/+1
| | | | | | These symbols don't exist in any of the supported kernel versions. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* procd: update to git HEADDaniel Golle2021-12-202-17/+3
| | | | | | | | eb522fc uxc: consider uvol and etc location for configurations 16a6ee9 uxc: integrate console into uxc 129d050 remove ujail-console Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: make OpenWrt statistics per-BSSDavid Bauer2021-12-202-20/+20
| | | | | | | WNM and RRM statistics were incorrectly per-PHY, leading to shared statistic counters per BSS. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: provide BSS-transition-queries to ubus subscribersDavid Bauer2021-12-202-10/+69
| | | | | | | | | | | | | | | Provide incoming BSS transition queries to ubus subscribers. This allows external steering daemons to provide clients with an optimal list of transition candidates. This commit has no functional state in case no ubus subscriber is present or it does not handle this ubus message. To prevent hostapd from sending out a generic response by itself, a subscribing daemon has to return a non-zero response code to hostapd. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: WNM: allow specifying dialog-tokenDavid Bauer2021-12-202-4/+110
| | | | | | | | | | Backport a patch to allow extending the ubus BSS-transition method for specifying individual dialog tokens for BSS transition management requests. This is required for handling BSS transition queries in the future. Signed-off-by: David Bauer <mail@david-bauer.net>
* odhcp6c: update to latest git HEADHans Dedecker2021-12-171-3/+3
| | | | | | | | 39b584b Revert "dhcpv6: add a minimum valid lifetime for IA_PD updates" c9578e1 dhcpv6: add support for null IA_PD valid lifetime ca43ea3 dhcpv6: add a minimum valid lifetime for IA_PD updates Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: update to latest git HEADHans Dedecker2021-12-171-3/+3
| | | | | | | | | 5ca5e0b netifd: allow disabling rule/rule6 config sections 8875960 interface-ip: add support for IPv6 prefix invalidation e589c05 interface-ip: use metric when looking for a route b54ffde main: fix hotplug script usage message Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: optimize airtime fairness code to reduce cpu usageFelix Fietkau2021-12-171-0/+60
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: close correct blobmsg tableDavid Bauer2021-12-161-1/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add OpenWrt specific statistic countersDavid Bauer2021-12-152-1/+105
| | | | | | | | | | This adds a new struct for storing statistics not (yet) tracked by hostapd regarding RRM and WNM activity. These statistics can be read using the get_status hostapd interface ubus method. Signed-off-by: David Bauer <mail@david-bauer.net>
* iw: Update to version 5.16Hauke Mehrtens2021-12-144-367/+260
| | | | | | | | | | | Revert a commit to allow providing CFLAGS and LIBS from OpenWrt package Makefile. This downgrades the nl80211.h to kernel 5.15 and removes FILS_CRYPTO_OFFLOAD. This is needed to make it compatible with our patched mac80211 from kernel 5.15 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* libnl-tiny: update to the latest versionHauke Mehrtens2021-12-141-4/+4
| | | | | | 8e0555f attr.h: Add NLA_PUT_S32 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-22 20:29:10 +0000