aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: rt2x00: add experimental patches from Stanislaw GruszkaDaniel Golle2018-09-265-0/+1067
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: remove obsolete patchDaniel Golle2018-09-261-136/+0
| | | | | | | | According to Stanislaw Gruszka the patch 600-23-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch should be dropped. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: add TX LOFT calibrationTomislav Požega2018-09-261-0/+1005
| | | | | | Add TX LOFT calibration from mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
* mac80211: rt2x00: add RXIQ calibrationTomislav Požega2018-09-261-0/+417
| | | | | | | Add RXIQ calibration found in mtk driver. With old openwrt builds this gets us ~8Mbps more of RX bandwidth (test with iPA/eLNA layout). Please try if this makes any difference among various board/RF layouts. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
* mac80211: rt2x00: add RXDCOC calibrationTomislav Požega2018-09-261-0/+102
| | | | | | Add RXDCOC calibration code from mtk driver. Please try if this makes any difference among various board/RF layouts. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
* mac80211: rt2x00: add r calibrationTomislav Požega2018-09-261-0/+193
| | | | | | Add r calibration code as found in mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
* mac80211: rt2x00: add RF self TXDC calibrationTomislav Požega2018-09-261-0/+89
| | | | | | Add TX self calibration based on mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
* mac80211: rt2x00: write registers required for reducing power consumptionTomislav Požega2018-09-261-0/+43
| | | | | | | | | | | Write registers required for reducing power consumption like the vendor driver does when ADJUST_POWER_CONSUMPTION_SUPPORT is set. This helps devices to sync at better TX/RX rates and improves overall performance. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: edited commit message]
* linux-firmware: set PKG_MIRROR_HASHDaniel Golle2018-09-261-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* linux-firmware: add ath10k supportJohn Crispin2018-09-262-4/+109
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ath10k-firmware: disable the package and use default linux-firmware packageJohn Crispin2018-09-261-7/+7
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mac80211: rebase ontop of v4.18.5John Crispin2018-09-26284-15968/+388
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* netifd: do not validate relevant section when ipv6 is not supportedRosy Song2018-09-252-3/+3
| | | | Signed-off-by: Rosy Song <rosysong@rosinson.com>
* base-files: add network_get_metric() to /lib/functions/network.shFlorian Eckert2018-09-252-1/+6
| | | | | Signed-off-by: Florian Eckert <fe@dev.tdt.de> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* kernel: netfilter: add IPVS kernel module supportMauro Mozzarelli2018-09-241-0/+92
| | | | | | | | | | | | | | | | IPVS (IP Virtual Server) implements transport-layer load balancing inside the Linux kernel, so called Layer-4 switching. IPVS running on a host acts as a load balancer at the front of a cluster of real servers, it can direct requests for TCP/UDP based services to the real servers, and makes services of the real servers to appear as a virtual service on a single IP address. This change adds the following kmod packages - kmod-nf-ipvs - kmod-nf-ipvs-ftp - kmod-nf-ipvs-sip Signed-off-by: Mauro Mozzarelli <mauro@ezplanet.org> Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* ncurses: use default host installAndy Walsh2018-09-241-6/+0
| | | | | | * just use default host/install, so libs/headers get properly generated/installed Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
* gettext-full: host compile with -fpicAndy Walsh2018-09-241-0/+2
| | | | Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
* zram-swap: Shell cosmeticSamuel Casa2018-09-241-4/+4
| | | | Signed-off-by: Samuel Casa <samuel.casa@neratec.com>
* zram-swap: remove trailing whitespaces in init scriptSamuel Casa2018-09-241-2/+2
| | | | | | Signed-off-by: Samuel Casa <samuel.casa@neratec.com> [slightly reword subject] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dante: disable sched_getscheduler() - not implemented in muslDavid Yang2018-09-241-3/+4
| | | | | | | | | | | | | | | | | musl doesn't come with an valid implementation of `sched_getscheduler()`; it simply returns -ENOSYS for it. Without this option (and compile dante with `sched_getscheduler()` enabled), you will get error: serverinit(): sched_getscheduler(2): failed to retrieve current cpuscheduling policy: Function not implemented and dante won't start at all. Ref: http://lists.alpinelinux.org/alpine-devel/3932.html Ref: http://lists.alpinelinux.org/alpine-devel/3936.html Signed-off-by: David Yang <mmyangfl@gmail.com> [slightly reword commit message] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: fix postinstall uci-defaults removalTony Ambardar2018-09-241-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 7f694582 introduced a bug where default_postinst() often fails to remove a uci-defaults script after application, leaving it to run again after a reboot. (Note: commit 7f694582 also introduced FS#1021, now fixed by 73c745f6) The subtle problem arises from the shell logical chain: [ -f "$i" ] && . "$i" && rm -f "$i" Most uci-defaults scripts contain a terminal 'exit 0' statement which, when sourced, results in the logic chain exiting before executing 'rm -f'. This was observed while testing upgrades of 'luci-app-sqm'. The solution is to wrap the shell sourcing in a subshell relative to the command 'rm -f': ( [ -f "$i" ] && . "$i" ) && rm -f "$i" Revert to using 'grep' to prefilter the list of entries from the control file, which yields the full path of uci-defaults scripts. This allows keeping the existence check, directory change and script sourcing inside the subshell, with the script removal correctly outside. This approach avoids adding a second subshell only around the "." (source) command. The change also preserves the fix FS#1021, since the full path is used to source the script, which is POSIX-portable irrespective of PATH variable or reference to the CWD. Run Tested on: LEDE 17.01.4 running ar71xx, while tracing installation of package luci-app-sqm with its associated /etc/uci-defaults/luci-sqm file. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* lldpd: inhibit linking of libbsd on !GLIBCJo-Philipp Wich2018-09-241-0/+4
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* busybox: fix dependency for IPV6Rosy Song2018-09-232-1/+2
| | | | Signed-off-by: Rosy Song <rosysong@rosinson.com>
* layerscape: build ls-dpl package with linux dtc toolYangbo Lu2018-09-221-0/+3
| | | | | | | | | Building ls-dpl package requires the dtc tool. This patch is to support using linux dtc tool for ls-dpl package. This avoids compile issue when host system doesn't have the dtc tool. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: fix get_device_file() function of restoolYangbo Lu2018-09-221-0/+107
| | | | | | | | | | | | | | The restool failed to work with current gcc-7.3.0-musl. This patch is to add a restool fix-up patch to fix multiple problems encountered in the get_device_file() function: - The deprecated atoi() function is replaced by strtoul - An invalid memory access was being performed by using memory from dir->d_name even after closedir(). This is fixed by a strdup() on the device filename. - Also, error prints now print any relevant error code. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add ls1012afrwy support and drop ls1012afrdmYangbo Lu2018-09-226-25/+25
| | | | | | | | | | | | | | | | | | | | | | | ls1012afrdm was no longer supported in NXP Layerscape SDK. Instead a new board ls1012afrwy was introduced in LSDK. This patch is to drop ls1012afrdm and add ls1012afrwy support. Since only 2MB NOR flash could be used, we just put u-boot and firmware on NOR flash, and put kernel/dtb/rootfs on SD card. The Layerscape FRWY-LS1012A board is an ultra-low-cost development platform for LS1012A Series Communication Processors built on Arm Cortex-A53. This tool refines the FRDM-LS1012A with more features for a better hands-on experience for IoT, edge computing, and various advanced embedded applications. Features include easy access to processor I/O, low-power operation, micro SD card storage, an M2 connector, a small form factor, and expansion board options via mikroBUS Click Module. The MicroBUS Module provides easy expansion via hundreds of powerful modules supporting sensors, actuators, memories, and displays. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add SD card boot supportYangbo Lu2018-09-226-1/+73
| | | | | | | | | NOR/QSPI Flash on Layerscape board only has limited 64MB memory size. Since some boards (ls1043ardb/ls1046ardb/ls1088ardb/ls1021atwr) could support SD card boot, we added SD boot support for them to put all things on SD card to meet large memory requirement. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add armv7 subtarget and ls1021atwr board supportYangbo Lu2018-09-223-2/+24
| | | | | | | | | | | | | | | | | | The NXP TWR-LS1021A module is a development system based on the QorIQ LS1021A processor. - This feature-rich, high-performance processor module can be used standalone or as part of an assembled Tower System development platform. - Incorporating dual Arm Cortex-A7 cores running up to 1 GHz, the TWR-LS1021A delivers an outstanding level of performance. - The TWR-LS1021A offers HDMI, SATA3 and USB3 connectors as well as a complete Linux software developer's package. - The module provides a comprehensive level of security that includes support for secure boot, Trust Architecture and tamper detection in both standby and active power modes, safeguarding the device from manufacture to deployment. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add u-boot environment support for OpenWrt bootYangbo Lu2018-09-228-1/+70
| | | | | | | This patch is to implement u-boot environment txt files to support OpenWrt boot for all layerscape devices. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update u-boot to LSDK-18.06Yangbo Lu2018-09-222-49/+71
| | | | | | | | | | | | | | The u-boot source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update u-boot to LSDK-18.06 for both uboot-layerscape and uboot-layerscape-armv8_32b packages. Besides, this patch also introduced some other changes. - Reworked uboot-layerscape makefile to make it more readable. - Define package in uboot-layerscape-armv8_32b for each board. - Fixed u-boot package selection in target image makefile. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: drop uboot-layerscape patchesYangbo Lu2018-09-226-320/+0
| | | | | | | | Dropped uboot-layerscape patches which were environemnt patches. We will make u-boot environment binaries with a txt file for all devices. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update restool to LSDK-18.06Yangbo Lu2018-09-221-6/+5
| | | | | | | | The restool source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update restool to LSDK-18.06 release. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-ppa to LSDK-18.06Yangbo Lu2018-09-221-73/+46
| | | | | | | This patch is to update ls-ppa to LSDK-18.06 release and to rework ls-ppa makefile to make it more readable. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-rcw to LSDK-18.06Yangbo Lu2018-09-223-175/+81
| | | | | | | | | | | | The rcw source code had been migrated to codeaurora for LSDK-18.06 release and the future release. The source code had also involved ls1012ardb/ls1012afrdm/ ls1088ardb/ls2088ardb rcw, so we updated ls-rcw to LSDK-18.06, reworked the makefile and dropped ls-rcw-bin package in this patch. Also reworked ls-rcw patch to adapt to the latest source code. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ppfe-firmware to LSDK-18.06Yangbo Lu2018-09-221-6/+4
| | | | | | This patch is to update ppfe-firmware to LSDK-18.06 release. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-mc to LSDK-18.06Yangbo Lu2018-09-221-13/+7
| | | | | | This patch is to update ls-mc to LSDK-18.06 release. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-dpl to LSDK-18.06Yangbo Lu2018-09-221-16/+12
| | | | | | | | | The dpl-examples source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update this package to LSDK-18.06. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update fman-ucode to LSDK-18.06Yangbo Lu2018-09-221-59/+21
| | | | | | | | | Actually there was no change for fman-ucode in LSDK-18.06 just tagged with LSDK-18.06. This patch is to rework the fman-ucode makefile to make it more readable, and to use lsdk-1806 as the PKG_VERSION. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* sunxi: build image/uboot for the NanoPi NEO2Jasper Scholte2018-09-221-0/+9
| | | | | | | | The NanoPi NEO2 is a small Allwinner H5 based board available with different DRAM configurations. This board is very similar to the NanoPi NEO PLUS2 Signed-off-by: Jasper Scholte <NightNL@outlook.com>
* kernel: add Si7020 relative humidity/temperature sensor driverHartmut Knaack2018-09-221-0/+18
| | | | | | | Add support for the Silicon Labs Si7020 family of relative humidity and temperature sensors using the I2C bus. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
* kernel: add TSL4531 ambient light sensor driverHartmut Knaack2018-09-221-0/+18
| | | | | | | Add support for the TAOS TSL4531x family of ambient light sensors using the I2C bus. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
* mbedtls: update to 2.13.0Magnus Kroken2018-09-221-2/+2
| | | | | | | | * Fixed a security issue in the X.509 module which could lead to a buffer overread during certificate extensions parsing. * Several bugfixes. * Improvements for better support for DTLS on low-bandwidth, high latency networks with high packet loss. Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* ath9k: add back support for using tx99 with active monitor interfacesFelix Fietkau2018-09-221-0/+96
| | | | | | Fixes controlling bitrate Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix tx queue allocation for active monitor interfacesFelix Fietkau2018-09-221-0/+26
| | | | | | Fixes a crash with drivers like ath9k Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: fix tx power issue for mt76x2Felix Fietkau2018-09-221-3/+3
| | | | | | 6e1898d mt76x2: fix tx power configuration for VHT mcs 9 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* elfutils: bump to 0.174Luiz Angelo Daros de Luca2018-09-212-533/+7
| | | | | | - Simplified musl patch with error.h concentrated into system.h Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* dnsmasq: Change behavior when RD bit unset in queries.Kevin Darbyshire-Bryant2018-09-212-1/+55
| | | | | | | | | | | Backport upstream commit Change anti cache-snooping behaviour with queries with the recursion-desired bit unset. Instead to returning SERVFAIL, we now always forward, and never answer from the cache. This allows "dig +trace" command to work. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mwlwifi: driver version to 10.3.8.0-20180920Jonathan Lancett2018-09-201-3/+3
| | | | | | Signed-off-by: Jonathan Lancett <j.lancett@ntlworld.com> [minor tweak to commit title] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ath9k: fix unloading the moduleFelix Fietkau2018-09-202-15/+10
| | | | | | | | | Registering a GPIO chip with the ath9k device as parent prevents unload, because the gpiochip core increases the module use count. Unfortunately, the only way to avoid this at the moment seems to be to register the GPIO chip without a parent device Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mdadm: Install /etc/config file as 600Rosen Penev2018-09-191-4/+5
| | | | | | | | | | | /etc/config/mdadm is only used by the init script which is ran as root. There is no need for it to be readable by anything else. Added PKG_CPE_ID for proper CVE tracking. Small reorganization for consistency between Makefiles. Signed-off-by: Rosen Penev <rosenp@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-14 05:24:11 +0000