aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
...
* iwinfo: update to the latest versionFelix Fietkau2022-12-191-3/+3
| | | | | | | 0496c722f1d7 nl80211: fix issues with renamed wiphy and multiple phy per device Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 735f5f18ddbcb5c4e2033f1c08be0113369d2b79)
* iwinfo: update to the latest versionFelix Fietkau2022-12-191-3/+3
| | | | | | | | | | | 46f04f3808e8 devices: add MediaTek MT7986 WiSoC b3e08c8b5a8f ops: make support for wireless extensions optional 1f695d9c7f82 nl80211: allow phy names that don't start with 'phy' b7f9f06e1594 nl80211: fix phy/netdev index lookup 4a43b0d40ba5 nl80211: look up the phy name instead of assuming name == phy<idx> Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit c787962e1d5016cab637cf8857bc6aa3afdda001)
* kernel: kmod-net-rtl8192su: Remove packageHauke Mehrtens2022-12-152-25/+0
| | | | | | | | | | | | | The R8712U driver depends on cfg80211. cfg80211 is provided by mac80211 backports, we can not build any in kernel drivers which depend on cfg80211 which is an out of tree module in OpenWrt. The cfg80211 dependency was added with kernel 5.9. We could add rtl8192su to backports and build it from there. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 7ebe1dca476ddb2c08f8a1cbbd0522e69c1edc82)
* umbim: Allow roaming and partner connectionsJulio Gonzalez Gil2022-12-151-6/+25
| | | | | | | | | | | Allow registration if the SIM is roaming or partner mode, by adding two new options to the protocol. Until now, such registration failed because umbim returns exit codes 4 and 5 for such situations. Signed-off-by: Julio Gonzalez Gil <git@juliogonzalez.es> (cherry picked from commit 840ce0a65bbb7ba13a547f90cb94452b290475ef)
* kernel: further cleanup of xfrm[4|6]_mode*Martin Schiller2022-12-151-6/+0
| | | | | | | | | | In my commit da5c45f4d886 ("kernel: remove handling of xfrm[4|6]_mode_* modules") I missed a few default config options and description entries. Those should be gone as well. Fixes: da5c45f4d886 ("kernel: remove handling of xfrm[4|6]_mode_* modules") Signed-off-by: Martin Schiller <ms@dev.tdt.de> (cherry picked from commit 1e028ac51e4d033cc1a8a06850ca8c6469206761)
* kernel: remove handling of xfrm[4|6]_mode_* modulesMartin Schiller2022-12-151-12/+2
| | | | | | | | | | | | | | | | For kernel versions before 5.2, the required IPsec modes have to be enabled explicitly (they are built-in for newer kernels). Commit 1556ed155a9a ("kernel: mode_beet mode_transport mode_tunnel xfram modules") tried to handle this, but it does not really work. Since we don't support these kernel versions anymore and the code is also broken, let's remove it. Signed-off-by: Martin Schiller <ms@dev.tdt.de> [Remove old generic config options too] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit da5c45f4d8864a82378b4a04c0516cb98a718cfa)
* kernel: fix typo for tegra crypto-sha1 moduleJosef Schlehofer2022-12-151-1/+1
| | | | | | | | Fixes: e889489bedfd2830411bd0cf6564b8272aa9c254 ("kernel: build arm/neon-optimized sha1/512 modules") Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit f8f9d6901c6a7c85e6b18fba665175646fb53ec7)
* kernel: add kmod-btsdio packageLech Perczak2022-12-151-0/+18
| | | | | | | | | Add package supporting Bluetooth HCI interfaces connected over SDIO. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> [pepe2k@gmail.com: dropped rfkill dependency, other minor text fixes] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> (cherry picked from commit fb7547684538e5501c4b91ed62e5f66832e4d9bc)
* kernel: remove CONFIG_MMC_BLOCK_BOUNCETomas Lara2022-12-151-1/+0
| | | | | | | | CONFIG_MMC_BLOCK_BOUNCE was removed in kernel v4.13-rc1 https://github.com/torvalds/linux/commit/c3dccb74be28a345a2ebcc224e41b774529b8b8f Signed-off-by: Tomas Lara <tl849670@gmail.com> (cherry picked from commit 24307b035143bc710268590850e595e1fad86f08)
* comgt-ncm: add support for quectel modem EC200T-EUJan-Niklas Burfeind2022-12-092-0/+22
| | | | | | | | | | context_type is an integer mapping of pdptype: 1: IPV4 2: IPV6 3: IPV4V6 Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> (cherry picked from commit 13f82ce264ed2d02c66cb2cae8f013c8f64a979f)
* ustream-ssl: update to Git version 2022-12-07Hauke Mehrtens2022-12-081-4/+4
| | | | | | | | | | 9217ab4 ustream-openssl: Disable renegotiation in TLSv1.2 and earlier 2ce1d48 ci: fix building with i.MX6 SDK 584f1f6 ustream-openssl: wolfSSL: provide detailed information in debug builds aa8c48e cmake: add a possibility to set library version Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 69f0c29b8b3339ef93c04f6c7f92481e8e223e2f)
* e2fsprogs: Fix CVE-2022-1304Hauke Mehrtens2022-12-062-1/+51
| | | | | | | | | | This fixes CVE-2022-1304: An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5. This issue leads to a segmentation fault and possibly arbitrary code execution via a specially crafted filesystem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 60e335b76ea0aeedd9f8e01d247f9aaa617076da)
* ucode: update to latest Git HEADJo-Philipp Wich2022-12-061-3/+3
| | | | | | | | | | | | | | | | | | 46d93c9 tests: fixup testcases 4c654df types: adjust double printing format eac2add compiler: fix bytecode for logical assignments of properties 3903b18 fs: add `realpath()` function 8366102 math: add isnan() function eef83d3 tests: relax sleep() test 394e901 lib: uc_json(): accept trailing whitespace when parsing strings 1867c8b uloop: terminate parent uloop in task child processes d2cc003 uci: auto-load package in `ctx.foreach()` and `ctx.get_first()` 6c5ee53 compiler: ensure that arrow functions with block bodies return no value fdc9b6a compiler: fix `??=`, `||=` and `&&=` logical assignment semantics 88dcca7 add cmake to install requires for debian Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit a4d67066e39bd93c7011c8e07b740a326e4e9803)
* kernel: netconsole: add network console logging supportCatalin Toda2022-12-061-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Accessing the console on many devices is difficult. netconsole eases debugging on devices that crash after the network is up. Reference to the netconsole documentation in upstream Linux: <https://www.kernel.org/doc/html/latest/networking/netconsole.html> | |netconsole=[+][src-port]@[src-ip]/[<dev>],[tgt-port]@<tgt-ip>/[tgt-macaddr] | | where | + if present, enable extended console support | src-port source for UDP packets (defaults to 6665) | src-ip source IP to use (interface address) | dev network interface (eth0) | tgt-port port for logging agent (6666) | tgt-ip IP address for logging agent | tgt-macaddr ethernet MAC address for logging agent (broadcast) OpenWrt specific notes: OpenWrt's device userspace scripts are attaching the network interface (i.e. eth0) to a (virtual) bridge (br-lan) device. This will cause netconsole to report: |network logging stopped on interface eth0 as it is joining a master device (and unfortunately the traffic/logs to stop at this point) As a workaround, the netconsole module can be manually loaded again after the bridge has been setup with: insmod netconsole netconsole=@/br-lan,@192.168.1.x/MA:C... One way of catching errors before the handoff, try to append the /etc/modules.conf file with the following extra line: options netconsole netconsole=@/eth0,@192.168.1.x/MA:C... and install the kmod-netconsole (=y) into the base image. Signed-off-by: Catalin Toda <catalinii@yahoo.com> (Added commit message from PR, added links to documentation) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 488b25f5ac5028923f67e3beade92dab0c2591f1)
* kernel: kmod-isdn4linux: Remove packageHauke Mehrtens2022-12-061-32/+0
| | | | | | | | The isdn4linux drivers and subsystem was removed in kernel 5.3, remove the kernel package also from OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit db55dea5fc047190af188f07018e99b0c7a4bdde)
* kernel: kmod-w1-slave-ds2760: Remove packageHauke Mehrtens2022-12-061-17/+0
| | | | | | | | | | | The w1_ds2760.ko driver was merged into the ds2760_battery.ko driver. The driver was removed and this package was never build any more. This happened with kernel 4.19. Remove this unused package. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 5808973d141f488e06efe4749dbf651565fd5510)
* kernel: kmod-rtc-pt7c4338: Remove packageHauke Mehrtens2022-12-061-16/+0
| | | | | | | | | | The rtc-pt7c4338.ko was never upstream under this name, the driver was removed from OpenWrt some years ago, remove the kmod-rtc-pt7c4338 package too. Fixes: 74d00a8c3849 ("kernel: split patches folder up into backport, pending and hack folders") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 5ccf4dcf8864c1d940b65067d8c6f7c4e5858ae2)
* mac80211: Update to version 5.15.81Hauke Mehrtens2022-12-0328-351/+48
| | | | | | | The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 077622a198039f9f3d907b5cf4d77a52d7592c49)
* base-files: support "metric" in board.jsonRafał Miłecki2022-12-011-1/+2
| | | | | | | | It allows prepopulating /etc/config/network interface-s with predefined metric. It may be useful for devices with multiple WAN ports. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 7f443d2d9aa1170d6b68f0dc6d5b5552882ee327)
* mt76: move the mt7921 firmware to its own packageAndre Heider2022-11-291-3/+9
| | | | | | | | | | It's not just required for the PCI version, but for USB and presumably SDIO as well. Tested with 0e8d:7961 Comfast CF-953AX (MT7921AU). Signed-off-by: Andre Heider <a.heider@gmail.com> (cherry picked from commit 6f729163b18fb5860f1aa5a5a0c8861a8e3f53ad)
* kernel: add kmod-hwmon-sht3x supportUwe Kleine-König2022-11-271-0/+15
| | | | | | | | The driver supports the temperature and humidity sensors chips SHT3x and STS3x by Sensirion. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> (cherry picked from commit cec9cbef449daea6529fbda64777ff1b7ae4e499)
* procd: service: pass all arguments to serviceAndrew Ammerlaan2022-11-271-3/+3
| | | | | | | | | | Passing all arguments to /etc/init.d/$service restores the behaviour of openwrt 21.02. This is relevant for services such as etherwake which take more then one argument, e.g.: "service etherwake start <list of devices to wake>" Signed-off-by: Andrew Ammerlaan <andrewammerlaan@gentoo.org> (cherry picked from commit b2e83c16e1383eb817c1f34d7118b01cefa670d8)
* wolfssl: update to v5.5.3Nick Hainke2022-11-273-53/+3
| | | | | | | | | | | | | | | Remove "200-ecc-rng.patch" because it was upstramed by: https://github.com/wolfSSL/wolfssl/commit/e2566bab2122949a6a0bb2276d0a52598794d7d0 Refreshed "100-disable-hardening-check.patch". Fixes CVE 2022-42905. Release Notes: - https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.2-stable - https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.3-stable Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 745f1ca9767716c43864a2b7a43ed60b16c25560)
* mbedtls: import patch to fix illegal instruction on mpc85xxNick Hainke2022-11-271-0/+30
| | | | | | Import patch as workaround for gcc-11.2.0. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mt76: add firmware package for mt7916Andrew Powers-Holmes2022-11-271-0/+16
| | | | | | | | | | | Add kernel package 'mt7916-firmware' with firmware files for MT7916E devices. These share the same driver as the MT7915 chipset, but use their own firmware. Tested using a pair of AsiaRF AW7916-NPD cards. Signed-off-by: Andrew Powers-Holmes <aholmes@omnom.net> (cherry picked from commit 94d0cb9d2ec23fb15acd1fc17a351983f8771d13)
* kernel: modules: package Marvell gigE PHY driverDaniel Golle2022-11-261-0/+34
| | | | | | | | | | | | | | | | | | | | Some copper SFP modules come with Marvell's 88E1xxx PHY and need this module to function. Package it, so users can easily install this PHY driver and use e.g. FINISAR CORP. FCLF-8521-3-HC SFP. Without marvell PHY driver: sfp sfp2: module FINISAR CORP. FCLF-8521-3-HC rev A sn XXXXXXX dc XXXXXX mt7530 mdio-bus:1f sfp2: validation with support 0000000,00000000,00000000 failed: -22 sfp sfp2: sfp_add_phy failed: -22 With marvell PHY driver: sfp sfp2: module FINISAR CORP. FCLF-8521-3-HC rev A sn XXXXXXX dc XXXXXX mt7530 mdio-bus:1f sfp2: switched to inband/sgmii link mode mt7530 mdio-bus:1f sfp2: PHY [i2c:sfp2:16] driver [Marvell 88E1111] (irq=POLL) mt7530 mdio-bus:1f sfp2: Link is Up - 1Gbps/Full - flow control rx/tx Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit ebe2b7190b7d8815a588eaf8a5cfdf9edfd85c36)
* kernel: improve description of NTFS kernel packagesRafał Miłecki2022-11-211-2/+3
| | | | | | | This helps choosing the right NTFS driver from two available options. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit b066ad7d9aa5221bfd334a3017abe9bcd171b33f)
* ath79: add support for Linksys EA4500 v3Edward Chow2022-11-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Linksys EA4500 v3 wireless router Hardware -------- SoC: Qualcomm Atheros QCA9558 RAM: 128M DDR2 (Winbond W971GG6KB-25) FLASH: 128M SPI-NAND (Spansion S34ML01G100TFI00) WLAN: QCA9558 3T3R 802.11 bgn QCA9580 3T3R 802.11 an ETH: Qualcomm Atheros QCA8337 UART: 115200 8n1, same as ea4500 v2 USB: 1 single USB 2.0 host port BUTTON: Reset - WPS LED: 1x system-LED LEDs besides the ethernet ports are controlled by the ethernet switch MAC Address: use address(sample 1) source label 94:10:3e:xx:xx:6f caldata@cal_macaddr lan 94:10:3e:xx:xx:6f $label wan 94:10:3e:xx:xx:6f $label WiFi4_2G 94:10:3e:xx:xx:70 caldata@cal_ath9k_soc WiFi4_5G 94:10:3e:xx:xx:71 caldata@cal_ath9k_pci Installation from Serial Console ------------ 1. Connect to the serial console. Power up the device and interrupt autoboot when prompted 2. Connect a TFTP server reachable at 192.168.1.0/24 (e.g. 192.168.1.66) to the ethernet port. Serve the OpenWrt initramfs image as "openwrt.bin" 3. To test OpenWrt only, go to step 4 and never execute step 5; To install, auto_recovery should be disabled first, and boot_part should be set to 1 if its current value is not. ath> setenv auto_recovery no ath> setenv boot_part 1 ath> saveenv 4. Boot the initramfs image using U-Boot ath> setenv serverip 192.168.1.66 ath> tftpboot 0x84000000 openwrt.bin ath> bootm 5. Copy the OpenWrt sysupgrade image to the device using scp and install it like a normal upgrade (with no need to keeping config since no config from "previous OpenWRT installation" could be kept at all) # sysupgrade -n /path/to/openwrt/sysupgrade.bin Note: Like many other routers produced by Linksys, it has a dual firmware flash layout, but because I do not know how to handle it, I decide to disable it for more usable space. (That is why the "auto_recovery" above should be disabled before installing OpenWRT.) If someone is interested in generating factory firmware image capable to flash from stock firmware, as well as restoring the dual firmware layout, commented-out layout for the original secondary partitions left in the device tree may be a useful hint. Installation from Web Interface ------------ 1. Login to the router via its web interface (default password: admin) 2. Find the firmware update interface under "Connectivity/Basic" 3. Choose the OpenWrt factory image and click "Start" 4. If the router still boots into the stock firmware, it means that the OpenWrt factory image has been installed to the secondary partitions and failed to boot (since OpenWrt on EA4500 v3 does not support dual boot yet), and the router switched back to the stock firmware on the primary partitions. You have to install a stock firmware (e.g. 3.1.6.172023, downloadable from https://www.linksys.com/support-article?articleNum=148385 ) first (to the secondary partitions) , and after that, install OpenWrt factory image (to the primary partitions). After successful installation of OpenWrt, auto_recovery will be automatically disabled and router will only boot from the primary partitions. Signed-off-by: Edward Chow <equu@openmail.cc> (cherry picked from commit 50f727b7737d118f7d44986181e305af0624c41d)
* mac80211: fix mesh airtime link metric estimationFelix Fietkau2022-11-101-0/+36
| | | | | | | fix reading the per-packet rate on devices with firmware rate control Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 161b22d103decd82868e8e3c3fe09b88cf64724c)
* mac80211: fix issues with receiving small STP packetsFelix Fietkau2022-11-102-0/+124
| | | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit cec7dfa49775ce65270b977bea5fc0f928f97bdc) (cherry-picked from commit f6c359a65528b994e97235b5f0b0d02d6cdad918)
* mac80211: fix decap offload for stations on AP_VLAN interfacesFelix Fietkau2022-11-101-0/+37
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit eb07020de2b4a5f89579f09f5060d4b9f070a356)
* hostapd: remove invalid dtim_period option processingFelix Fietkau2022-11-101-2/+1
| | | | | | | | | dtim_period is a bss property, not a device one. It is already handled properly in mac80211.sh Fixes: 30c64825c7ed ("hostapd: add dtim_period, local_pwr_constraint, spectrum_mgmt_required") Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit ddf736e543d4a214f563dc008b6fb5ee5e0d1b66)
* strace: replace PKG_CPE_IDNick Hainke2022-11-071-1/+1
| | | | | | | | | | | Searching for strace in nvd.nist.gov/products/cpe/search [0] will result in "cpe:/a:strace_project:strace". Replace the current PKG_CPE_ID with it. [0] - https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.2&keyword=strace Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 55c015ae4d115cf8ffb61ee2778d8355c224bd46)
* strace: update to 5.19Nick Hainke2022-11-071-3/+3
| | | | | | | | Release Notes: https://strace.io/files/5.19/ Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 781a2e20085fff44fade871b0801468e4800af1a)
* strace: add nls.mkRosen Penev2022-11-071-1/+2
| | | | | | | | Needed when building with libdw and CONFIG_BUILD_NLS, mostly for the rpath-link. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit 4dc198a74e63c18733be4c6962e19e68f094e688)
* strace: update to 5.18Nick Hainke2022-11-071-2/+2
| | | | | | | | | | | | | | | | Improvements - Added an interface of raising des Strausses awareness. - Added --tips option to print strace tips, tricks, and tweaks at the end of the tracing session. - Enhanced decoding of bpf and io_uring_register syscalls. - Implemented decoding of COUNTER_*, RTC_PARAM_GET, and RTC_PARAM_SET ioctl commands. - Updated lists of BPF_*, BR_*, BTRFS_*, IFA_*, IFLA_*, IORING_*, KEY_*, KVM_*, MADV_*, and UFFD_* constants. - Updated lists of ioctl commands from Linux 5.18. Bug fixes - Fixed printing of the updated value of union bpf_attr.next_id on the exiting of bpf(BPF_*_GET_NEXT_ID) calls. Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 6d423ffbd17f5b00432f8f7a9fc7ea18d437d902)
* strace: update to 5.17Nick Hainke2022-11-071-2/+2
| | | | | | | | | | | | | | | | | Improvements - Added 64-bit LoongArch architecture support. - Extended personality designation syntax of syscall specification expressions to support all@pers and %class@pers. - Enhanced rejection of invalid syscall numbers in syscall specification expressions. - Implemented decoding of set_mempolicy_home_node syscall, introduced in Linux 5.17. - Implemented decoding of IFLA_GRO_MAX_SIZE and TCA_ACT_IN_HW_COUNT netlink attributes. - Implemented decoding of PR_SET_VMA operation of prctl syscall. - Implemented decoding of siginfo_t.si_pkey field. - Implemented decoding of LIRC ioctl commands. - Updated lists of FAN_*, IORING_*, IOSQE_*, KEY_*, KVM_*, MODULE_INIT_*, TCA_ACT_*, and *_MAGIC constants. - Updated lists of ioctl commands from Linux 5.17. Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 36f3238dcb119f9e6b79e01d8f97776f67a7bfce)
* kernel: netsupport: Add FQ-PIE as an optional sched kmod and extract PIEKabuli Chana2022-11-051-2/+33
| | | | | | | | | add Flow Queuing with Proportional Integral controller Enhanced (FQ-PIE) as an optional kmod in network support and extract sched-pie from kmod-sched to allow dependency on just kmod-sched-pie (PIE). Signed-off-by: Kabuli Chana <newtownBuild@gmail.com> (cherry picked from commit c3e4a0d99b972b91dd65f535365b9b71fcb541ae)
* kernel: extract kmod-sched-act-ipt from kmod-schedStijn Tintel2022-11-051-3/+18
| | | | | | | | | | | There is only one module in kmod-sched that depends on iptables. Move it to its own kmod package so we can drop the kmod-ipt-core dependency from kmod-sched. This makes it possible to disable all kmod-ipt-* packages without having to disable kmod-sched. Since we now default to firewall4 and nftables, we should avoid iptables dependencies where we can. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 05775e38a52007397e5460bd87fa1ac957feb2af)
* kernel: netsupport: Extract act_policeHauke Mehrtens2022-11-051-2/+13
| | | | | | | | This extracts kmod-sched-act-police to allow using it without adding all the packages from the big kmod-sched package. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com> (cherry picked from commit 0582acf42967e47c16eb3193f91ca65b01b57e8e)
* kernel: netsupport: Add kmod-sched-act-sampleThomas Langer2022-11-051-0/+20
| | | | | | | | | This adds the act_sample.ko and psample.ko kernel module which allows traffic sampling. Signed-off-by: Thomas Langer <tlanger@maxlinear.com> Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com> (cherry picked from commit aba1bdaed8cb612d4a4d9e8bba2dc963d6ceca76)
* kernel: netsupport: Extract sched-prio and sched-redThomas Langer2022-11-051-3/+33
| | | | | | | | | | Extract the kmod-sched-prio and kmod-sched-red kernel modules from the big kmod-sched package. This allows adding the two kernel modules to OpenWrt without adding the kmod-sched and all its depdnecy. Signed-off-by: Thomas Langer <tlanger@maxlinear.com> Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com> (cherry picked from commit 0e3911b6084ac596a3da6b1a255776e44331beef)
* kernel: netsupport: Add kmod-sched-drrHauke Mehrtens2022-11-051-0/+16
| | | | | | | This adds a package with the DRR scheduler. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com> (cherry picked from commit fa85e44d3c4437327a0ad592831f1746b8b2dc3a)
* kernel: netsupport: kmod-sched: Reorder packagesHauke Mehrtens2022-11-051-49/+53
| | | | | | | | | This puts the kmod-sched packages into an alphabetical order. I kept the kmod-sched-core at the top as this is the main package. No changes other than reordering were done. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com> (cherry picked from commit c94ba95e6cd41ccf8f15e77ebe7b7d65e5fd4396)
* ipq40xx: Add ZTE MF289FGiammarco Marzano2022-11-053-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's a 4G Cat.20 router used by Vodafone Italy (called Vodafone FWA) and Vodafone DE\T-Mobile PL (called GigaCube). Modem is a MiniPCIe-to-USB based on Snapdragon X24, it supports 4CA aggregation. There are currently two hardware revisions, which differ on the 5Ghz radio: AT1 = QCA9984 5Ghz Radio on PCI-E bus AT2 = IPQ4019 5Ghz Radio inside IPQ4019 like 2.4Ghz Device specification -------------------- SoC Type: Qualcomm IPQ4019 RAM: 256 MiB Flash: 128 MiB SPI NAND (Winbond W25N01GV) ROM: 2MiB SPI Flash (GD25Q16) Wireless 2.4 GHz (IP4019): b/g/n, 2x2 Wireless 5 GHz: (QCA9984): a/n/ac, 4x4 HW REV AT1 (IPA4019): a/n/ac, 2x2 HW REV AT2 Ethernet: 2xGbE (WAN/LAN1, LAN2) USB ports: No Button: 2 (Reset/WPS) LEDs: 3 external leds: Network (white or red), Wifi, Power and 1 internal (blue) Power: 12 VDC, 1 A Connector type: Barrel Bootloader: U-Boot Installation ------------ 1. Place OpenWrt initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial connector GND (which is right next to the thing with MF289F MIMO-V1.0), RX, TX (refer to this image: https://ibb.co/31Gngpr). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. Stop in u-Boot (using ESC button) and run u-Boot commands: setenv serverip 192.168.0.2 setenv ipaddr 192.168.0.1 set fdt_high 0x85000000 tftp openwrt-ipq40xx-generic-zte_mf289f-initramfs-fit-zImage.itb bootm $loadaddr 5. Please make backup of original partitions, if you think about revert to stock, specially mtd16 (Web UI) and mtd17 (rootFS). Use /tmp as temporary storage and do: WEB PARITION -------------------------------------- cat /dev/mtd16 > /tmp/mtd16.bin scp /tmp/mtd16.bin root@YOURSERVERIP:/ rm /tmp/mtd16.bin ROOT PARITION -------------------------------------- cat /dev/mtd17 > /tmp/mtd17.bin scp /tmp/mtd17.bin root@YOURSERVERIP:/ rm /tmp/mtd17.bin 6. Login via ssh or serial and remove stock partitions (default IP 192.168.0.1): # this can return an error, if ubi was attached before # or rootfs part was erased before. ubiattach -m 17 # it could return error if rootfs part was erased before ubirmvol /dev/ubi0 -N ubi_rootfs # some devices doesn't have it ubirmvol /dev/ubi0 -N ubi_rootfs_data 7. download and install image via sysupgrade -n (either use wget/scp to copy the mf289f's squashfs-sysupgrade.bin to the device's /tmp directory) sysupgrade -n /tmp/openwrt-...-zte_mf289f-squashfs-sysupgrade.bin Sometimes it could print ubi attach error, but please ignore it if process goes forward. Flash Layout NAND: mtd8: 000a0000 00020000 "fota-flag" mtd9: 00080000 00020000 "0:ART" mtd10: 00080000 00020000 "mac" mtd11: 000c0000 00020000 "reserved2" mtd12: 00400000 00020000 "cfg-param" mtd13: 00400000 00020000 "log" mtd14: 000a0000 00020000 "oops" mtd15: 00500000 00020000 "reserved3" mtd16: 00800000 00020000 "web" mtd17: 01d00000 00020000 "rootfs" mtd18: 01900000 00020000 "data" mtd19: 03200000 00020000 "fota" mtd20: 0041e000 0001f000 "kernel" mtd21: 0101b000 0001f000 "ubi_rootfs" SPI: mtd0: 00040000 00010000 "0:SBL1" mtd1: 00020000 00010000 "0:MIBIB" mtd2: 00060000 00010000 "0:QSEE" mtd3: 00010000 00010000 "0:CDT" mtd4: 00010000 00010000 "0:DDRPARAMS" mtd5: 00010000 00010000 "0:APPSBLENV" mtd6: 000c0000 00010000 "0:APPSBL" mtd7: 00050000 00010000 "0:reserved1" Back to Stock (!!! need original dump taken from initramfs !!!) ------------- 1. Place mtd16.bin and mtd17.bin initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial console connector (refer to the pin-out from above). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. rename mtd16.bin to web.img and mtd17.bin to root_uImage_s 5. Stop in u-Boot (using ESC button) and run u-Boot commands: This will erase RootFS+Web: nand erase 0x1000000 0x800000 nand erase 0x1800000 0x1D00000 This will restore RootFS: tftpboot 0x84000000 ${dir}root_uImage_s nand erase 0x1800000 0x1D00000 nand write $fileaddr 0x1800000 $filesize This will restore Web Interface: tftpboot 0x84000000 ${dir}web.img nand erase 0x1000000 0x800000 nand write $fileaddr 0x1000000 $filesize After first boot on stock firwmare, do a factory reset. Push reset button for 5 seconds so all parameters will be reverted to the one printed on label on bottom of the router Signed-off-by: Giammarco Marzano <stich86@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@gmail.com> (Warning: commit message did not conform to UTF-8 - hopefully fixed?, added description of the pin-out if image goes down, reformatted commit message to be hopefully somewhat readable on git-web, redid some of the gpio-buttons & leds DT nodes, etc.) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 0de6a3339f1aadc1de2c9371435e3de239a00645) [Backported to 22.03: added DTS to the makefile patch, fixed ipq-wifi inclusion for MF286D] Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* uboot-envtools: Fix format of autogenerated sectorsSven Eckelmann2022-11-052-0/+2
| | | | | | | | | | | | | | The sector number must be stored in hex. Otherwise, the number (like 16) will be parsed as hex and any write to the partition will end up with an error like: MTD erase error on /dev/mtd5: Invalid argument Fixes: 9adfeccd8415 ("uboot-envtools: Add support for IPQ806x AP148 and DB149") Fixes: 54b275c8ed3a ("ipq40xx: add target") Signed-off-by: Sven Eckelmann <sven@narfation.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@fungible.com> (cherry picked from commit 8d3e932b65b59ab7231cb5440866eb975bd150ea)
* openssl: bump to 1.1.1sJohn Audia2022-11-0514-168/+2527
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes between 1.1.1r and 1.1.1s [1 Nov 2022] *) Fixed a regression introduced in 1.1.1r version not refreshing the certificate data to be signed before signing the certificate. [Gibeom Gwon] Changes between 1.1.1q and 1.1.1r [11 Oct 2022] *) Fixed the linux-mips64 Configure target which was missing the SIXTY_FOUR_BIT bn_ops flag. This was causing heap corruption on that platform. [Adam Joseph] *) Fixed a strict aliasing problem in bn_nist. Clang-14 optimisation was causing incorrect results in some cases as a result. [Paul Dale] *) Fixed SSL_pending() and SSL_has_pending() with DTLS which were failing to report correct results in some cases [Matt Caswell] *) Fixed a regression introduced in 1.1.1o for re-signing certificates with different key sizes [Todd Short] *) Added the loongarch64 target [Shi Pujin] *) Fixed a DRBG seed propagation thread safety issue [Bernd Edlinger] *) Fixed a memory leak in tls13_generate_secret [Bernd Edlinger] *) Fixed reported performance degradation on aarch64. Restored the implementation prior to commit 2621751 ("aes/asm/aesv8-armx.pl: avoid 32-bit lane assignment in CTR mode") for 64bit targets only, since it is reportedly 2-17% slower and the silicon errata only affects 32bit targets. The new algorithm is still used for 32 bit targets. [Bernd Edlinger] *) Added a missing header for memcmp that caused compilation failure on some platforms [Gregor Jasny] Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit a0814f04ed955eb10b25df0ce6666ed91f11ca1b)
* uboot-layerscape: adjust LS1012A-IOT config and envPawel Dembicki2022-11-052-1/+46
| | | | | | | | | | | | | | | | In a254279a6c30 LS1012A-IOT kernel image was switched to FIT. But u-boot config is lack of FIT and ext4 support. This patch enables it. It also fix envs, because for some reason this board need to use "loadaddr" variable in brackets. Fixes: #9894 Fixes: a254279a6c30 ("layerscape: Change to combined rootfs on sd images") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (cherry picked from commit d75ed3726d994fd050730e9ab5923d6232913054)
* dnsmasq: Backport DHCPv6 server fix (CVE-2022-0934)Hauke Mehrtens2022-11-051-0/+179
| | | | | | | | | | | | This backports a commit from upstream dnsmasq to fix CVE-2022-0934. CVE-2022-0934 description: A single-byte, non-arbitrary write/use-after-free flaw was found in dnsmasq. This flaw allows an attacker who sends a crafted packet processed by dnsmasq, potentially causing a denial of service. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 002a99eccd75fb653163bae0a1132bd4f494e7ad)
* busybox: awk: fix use after free (CVE-2022-30065)Hauke Mehrtens2022-11-051-0/+42
| | | | | | | | | | | | This backports a commit which fixes a use after free bug in awk. CVE-2022-30065 description: A use-after-free in Busybox 1.35-x's awk applet leads to denial of service and possibly code execution when processing a crafted awk pattern in the copyvar function. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 8b383ee2a0d21144258346ad39006fc499d04b4f)
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-03 21:01:54 +0000