aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* nf-conntrack: allow querying conntrack info in nfqueueEtan Kissling2021-01-141-1/+1
| | | | | | | | | | | This allows libnetfilter_queue to access connection tracking information by requesting NFQA_CFG_F_CONNTRACK. Connection tracking information is provided in the NFQA_CT attribute. CONFIG_NETFILTER_NETLINK_GLUE_CT enables the interaction between nf_queue and nf_conntrack_netlink. Without this option, trying to access connection tracking information results in "Operation not supported". Signed-off-by: Etan Kissling <etan_kissling@apple.com>
* uboot-envtools: add support for Aruba AP-303 and AP-365Jan Alexander2021-01-141-0/+6
| | | | | | | | | Both devices use u-boot env variables to boot OpenWrt from its flash partition. Using u-boot envtools, it is possible to change the bootcmd back to the stock firmware partition directly from OpenWrt without attaching a serial cable or even physically accessing the device. Signed-off-by: Jan Alexander <jan@nalx.net>
* ipq806x: add support for Ubiquiti UniFi AC HDJan Alexander2021-01-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Qualcomm IPQ8064 RAM: 512MB DDR3 Flash: 256MB NAND (Micron MT29F2G08ABBEAH4) 32MB SPI-NOR (Macronix MX25U25635F) WLAN: Qualcomm Atheros QCA9994 4T4R b/g/n Qualcomm Atheros QCA9994 4T4R a/n/ac ETH: eth0 - SECONDARY (Atheros AR8033) eth1 - MAIN (Atheros AR8033) USB: USB-C LED: Dome (white / blue) BTN: Reset Installation ------------ Copy the OpenWrt sysupgrade image to the /tmp directory of the device using scp. Default IP address is 192.168.1.20 and default username and password are "ubnt". SSH to the device and write the bootselect flag to ensure it is booting from the mtd partition the OpenWrt image will be written to. Verify the output device below matches mtd partition "bootselect" using /proc/mtd. > dd if=/dev/zero bs=1 count=1 seek=7 conv=notrunc of=/dev/mtd11 Write the OpenWrt sysupgrade image to the mtd partition labeled "kernel0". Also verify the used partition device using /proc/mtd. > dd if=/tmp/sysupgrade.bin of=/dev/mtdblock12 Reboot the device. Back to stock ------------- Use the TFTP recovery procedure with the Ubiquiti firmware image to restore the vendor firmware. Signed-off-by: Jan Alexander <jan@nalx.net>
* uboot-rockchip: update NanoPi R2S patchesDavid Bauer2021-01-143-129/+178
| | | | | | | Update the NanoPi R2S to the latest version submitted upstream. Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-rockchip: update to v2021.01Marty Jones2021-01-145-111/+127
| | | | | | | | | | | | Update the U-Boot to version v2021.01. Run-tested: FriendlyARM NanoPi R2S Radxa Rock Pi 4 Pine64 RockPro64 Signed-off-by: Marty Jones <mj8263788@gmail.com> [format commit message] Signed-off-by: David Bauer <mail@david-bauer.net>
* iw: enable HE PHY information for iw-tinyDavid Bauer2021-01-142-28/+12
| | | | | | | | | | Currently PHY information obtained from "iw phy" lacks information about a PHYs HE capabilities when using the by default installed iw-tiny. As there are already 802.11ax supported devices, enabled printing this information for the by-default installed iw variant. Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: use hostapd PID returned from config_addDaniel Golle2021-01-102-3/+2
| | | | | | | Use PID returned from config_add instead of querying procd when adding configuration to hostapd. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: return PID on config_add callDaniel Golle2021-01-104-4/+11
| | | | | | | | | To simplify the way netifd acquires the PIDs of wpa_supplicant and hostapd let the config_add method of both of them return the PID of the called process. Use the returned PID instead of querying procd when adding wpa_supplicant configuration. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* iptables: update to 1.8.6Curtis Deptuck2021-01-097-39/+32
| | | | | | | | | | | | | Update iptables to 1.8.6 ChangeLog: https://netfilter.org/projects/iptables/files/changes-iptables-1.8.6.txt Refresh patch: 101-remove-check-already.patch Signed-off-by: Curtis Deptuck <curtdept@me.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [refresh patches]
* kernel: add hid-cp2112 driver supportPawel Dembicki2021-01-071-0/+17
| | | | | | | | This patch adds kernel module for Silicon Labs CP2112 HID USB to SMBus Master Bridge. This is a HID device driver which registers as an i2c adapter and gpiochip to expose these functions of the CP2112. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* base-files: read all 3 bytes in get_magic_vfat() at onceAdrian Schmutzler2021-01-072-2/+2
| | | | | | | While the speed improvement might be negligible, there is still no reason to read individual bytes. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lua: add -ldl for glibc buildsRosen Penev2021-01-061-2/+2
| | | | | | | | | | | | | For glibc, lua needs an explicit link to libdl as glibc has it separate Fixes the following error in at least collectd: ld: usr/lib/liblua.so: undefined reference to `dlopen' ld: usr/lib/liblua.so: undefined reference to `dlclose' ld: usr/lib/liblua.so: undefined reference to `dlerror' ld: usr/lib/liblua.so: undefined reference to `dlsym' Signed-off-by: Rosen Penev <rosenp@gmail.com>
* rpcd: update to git HEADDaniel Golle2021-01-071-4/+4
| | | | | | | | | | fd017ba iwinfo: add ht and vht operation info to wifi scan 4c66b31 iwinfo: export center channel for info ubus call e28d4a5 iwinfo: add support for 802.11ad and GCMP 5c15f57 iwinfo: return hwmode 'ad' on 802.11ad-only hardware ea7f471 iwinfo: include ht_operation data only if available Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* iwinfo: improve ABI version handling and bump to git HEADJo-Philipp Wich2021-01-071-7/+10
| | | | | | | | | | | | | | | | | | - Encode ABI version in compiled shared object file - Only ship versioned shared library a17f561 iwinfo: detect QCA IPQ4019 WiSoC from FDT ea28dfb iwinfo: export ht and vht operation in scan results 4e22953 iwinfo: export center_chan info for local wifi 74d13fb cli: account for additional digit for frequencies above 10GHz 8bfd8d8 iwinfo: add support for GCMP cipher 618c1e8 iwinfo: add hardware description for QCA MIPS WiSoCs 0702f32 iwinfo: improve center channel handling 51c1336 iwinfo: set center chan unsupported for not-nl80211 driver 23d2722 build: add ability to specify shared object version Signed-off-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "iwinfo: update to git HEAD"Jo-Philipp Wich2021-01-061-4/+4
| | | | | | | | | | | | | This reverts commit f1620630e9f3407780ddc554361841f05c996c49. This update introduces potentially remote exploitable buffer overreads in IE parsing logic. It also breaks the ABI without introdcing SOVERSION library versioning. Furthermore, HT information is incorrectly added for non-HT BSSes. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "rpcd: update to git HEAD"Jo-Philipp Wich2021-01-061-4/+4
| | | | | | | | | | | This reverts commit 190e7939639846b86ab487c50169963382720e2b. This update introduces a potential null-pointer deref with subsequent rpcd crash when querying wireless info for non-nl80211 wdevs. Additionally it wrongly includes ht frequency information for non-ht BSSes. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* rpcd: update to git HEADDaniel Golle2021-01-051-4/+4
| | | | | | | | | fd017ba iwinfo: add ht and vht operation info to wifi scan 4c66b31 iwinfo: export center channel for info ubus call e28d4a5 iwinfo: add support for 802.11ad and GCMP 5c15f57 iwinfo: return hwmode 'ad' on 802.11ad-only hardware Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* iwinfo: update to git HEADDaniel Golle2021-01-051-4/+4
| | | | | | | | | | a17f561 iwinfo: detect QCA IPQ4019 WiSoC from FDT ea28dfb iwinfo: export ht and vht operation in scan results 4e22953 iwinfo: export center_chan info for local wifi 74d13fb cli: account for additional digit for frequencies above 10GHz 8bfd8d8 iwinfo: add support for GCMP cipher Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: Add wil6210 driverRobert Marko2021-01-051-3/+15
| | | | | | | | | | This patch adds wil6210 driver for Wilocity/QCA based 802.11ad PCI cards. Driver uses cfg80211 and nl80211 but not mac80211. Integration for UCI and LuCI will come in other patches. Signed-off-by: Robert Marko <robimarko@gmail.com>
* linux-firmware: Add wil6210 firmwareRobert Marko2021-01-051-0/+8
| | | | | | | | This patch adds wil6210 firmware and board files. Firmware version is not up to date but is only freely redistributable one I found. Board file is a generic one so most devices and especially those for long distance PtP links will require so in a ipq-wifi like way. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: add 802.11ad-supportGary Cooper2021-01-052-1/+7
| | | | | | This adds logic to properly populate defaults in /etc/config/wireless. Signed-off-by: Gary Cooper <gaco@bitmessage.de>
* hostapd: wpa_supplicant: Enable proper GCMP cipher supportRobert Marko2021-01-052-1/+6
| | | | | | | | | This patch enables hostapd.sh to properly configure wpa_supplicant for when GCMP is used as cipher in station mode. Without this wpa_supplicant will be unable to connect to AP. This is needed for wil6210 as it does not support CCMP. Signed-off-by: Robert Marko <robimarko@gmail.com>
* base-files: wifi: add support for 802.11adDaniel Golle2021-01-052-1/+2
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* netifd: update to git HEADDaniel Golle2021-01-051-3/+3
| | | | | | 0c83439 netifd: wireless: default to GCMP WPA cipher on 802.11ad Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* fstools: fix 'firstboot' on unmounted UBIFS overlayDaniel Golle2021-01-041-3/+3
| | | | | | | | | | | The usual OpenWrt-way of writing the JFFS2-marker in order to have a filesystem erased at the next boot fails on UBIFS volumes due to UBI being a different beast when it comes to writing. As truncating a UBIFS volume only takes a few milliseconds and has the desired effect of wiping-out all content of that volume, just do that instead. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* odhcpd: bump to latest versionNick Hainke2021-01-041-3/+3
| | | | | | 3bda900 odhcpd: add option for setting preferred lifetime Signed-off-by: Nick Hainke <vincent@systemli.org>
* x86/efi: add FAT32 esp mounting supportKagurazaka Kotori2021-01-031-1/+6
| | | | | | | | | Adds a new function get_magic_fat32() in base-files to read FAT32 magic. Now FAT32 EFI system partition can be handled in the same way as FAT12/FAT16. Signed-off-by: Kagurazaka Kotori <kagurazakakotori@gmail.com> [replace '-o' with '] || [' to satisfy shellsheck] Signed-off-by: Paul Spooren <mail@aparcar.org>
* usbutils: removeRosen Penev2021-01-031-60/+0
| | | | | | | | This package is not needed in base. It will be imported in the packages feed. Signed-off-by: Rosen Penev <rosenp@gmail.com> Acked-by: Paul Spooren <mail@aparcar.org>
* usbreset: remove redundant packagePaul Spooren2021-01-032-275/+0
| | | | | | | | | The package `usbutils` already offers an USB reset function, this package is therefore not really required standalone. CC: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Paul Spooren <mail@aparcar.org>
* hostapd: add support for custom per-BSS optionsFlorian Beverborg2021-01-032-1/+8
| | | | | | | | | | | | This adds an option "hostapd_bss_options" that does the same as "hostapd_options" but on a per-BSS level, instead of a per-device level. This can be used, for example, to configure different per-devce sae_passwords per BSS or to augment some of the existing per-BSS options. Signed-off-by: Florian Beverborg <flo@beverb.org> [remove whitespace errors, bump release] Signed-off-by: Paul Spooren <mail@aparcar.org>
* mac80211: replace legacy minstrel with minstrel_ht, improve rate selectionFelix Fietkau2021-01-038-0/+2586
| | | | | | | Legacy minstrel is essentially unmaintained and was showing poor performance Replace it with minstrel_ht and improve rate selection and sampling behavior Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wolfssl: enable HAVE_SECRET_CALLBACKFelix Fietkau2021-01-021-0/+10
| | | | | | Fixes wpad-wolfssl build Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wolfssl: Fix hostapd build with wolfssl 4.6.0Hauke Mehrtens2021-01-011-0/+25
| | | | | | | | | | | | This fixes the following build problem in hostapd: mipsel-openwrt-linux-musl/bin/ld: /builder/shared-workdir/build/tmp/ccN4Wwer.ltrans7.ltrans.o: in function `crypto_ec_point_add': <artificial>:(.text.crypto_ec_point_add+0x170): undefined reference to `ecc_projective_add_point' mipsel-openwrt-linux-musl/bin/ld: <artificial>:(.text.crypto_ec_point_add+0x18c): undefined reference to `ecc_map' mipsel-openwrt-linux-musl/bin/ld: /builder/shared-workdir/build/tmp/ccN4Wwer.ltrans7.ltrans.o: in function `crypto_ec_point_to_bin': <artificial>:(.text.crypto_ec_point_to_bin+0x40): undefined reference to `ecc_map' Fixes: ba40da9045f7 ("wolfssl: Update to v4.6.0-stable") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* libevent2: trigger rebuild on libevent2-pthreadsAlexandru Ardelean2021-01-011-0/+1
| | | | | | | | | | | | | The symbol determines if the libevent2-pthreads libraries get built or not. If we want to select libevent2-pthreads, and these haven't been built, an error will occur mentioning that there are no 'libevent_pthreads-2.1.so' files. Adding CONFIG_PACKAGE_libevent2-pthreads to PKG_CONFIG_DEPEND will make sure that the libraries get re-built in case libevent2-pthreads is selected. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* base-files: allow reusing of boolean value extraction logicOldřich Jedlička2021-01-012-6/+13
| | | | | | | | | | | | | | | | | | | The `functions.sh` script has `config_get_bool()` function, which is usable when using UCI config direct access API, but there is no equivalent for the callback API. Introduce `get_bool()` function to allow reusing it from init scripts. Example: ```sh option_cb() { local option="$1" local value="$(get_bool "$2")" ... } ``` Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
* kernel/modules: remove fake users from udptunnel{4,6}Rui Salvaterra2021-01-011-6/+2
| | | | | | | | | | Since we're now able to select CONFIG_NET_UDP_TUNNEL at will, drop the fake dependencies. This is a partial revert of commit d7e040f8bccec06b64c82963be6435101423dbf1 "kernel: add fake users for udptunnel and iptunnel modules". Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* cryptodev-linux: bump to 1.11, fix build against kernel 5.10.Stijn Segers2021-01-013-53/+35
| | | | | | | This patch bumps cryptodev-linux to the latest stable release (1.11) and fixes compilation against the next LTS (and likely OpenWrt) kernel 5.10. Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* trace-cmd: update to 2.9.1Rosen Penev2021-01-014-39/+121
| | | | | | | | | | | Fixed license information. Adjusted Makefile to new install paths. Backported upstream patch to fix compilation with musl. Replaces local and incomplete patch. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ppp: Remove already applied patchHauke Mehrtens2021-01-012-14/+1
| | | | | | | This patch was already applied upstream and not needed here. Fixes: 06403981e1f2 ("ppp: update to version 2.4.7.git-2019-05-06") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wolfssl: Update to v4.6.0-stableEneas U de Queiroz2021-01-014-154/+4
| | | | | | | | | | | | | | | | | This version fixes a large number of bugs, although no security vulnerabilities are listed. Full changelog at: https://www.wolfssl.com/docs/wolfssl-changelog/ or, as part of the version's README.md: https://github.com/wolfSSL/wolfssl/blob/v4.6.0-stable/README.md Due a number of API additions, size increases from 374.7K to 408.8K for arm_cortex_a9_vfpv3-d16. The ABI does not change from previous version. Backported patches were removed; remaining patch was refreshed. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* iproute2: update to 5.10.0Russell Senior2021-01-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | c8faeca5 (ss: mptcp: fix add_addr_accepted stat print, 2020-11-18) 0d78e8ea (tc: pedit: fix memory leak in print_pedit, 2020-12-11) ec1346ac (devlink: fix memory leak in cmd_dev_flash(), 2020-12-11) 309e6027 (man: tc-flower: fix manpage, 2020-12-11) 376367d9 (uapi: merge in change to bpf.h, 2020-12-14) 2e80ae89 (Merge branch 'gcc-10' into main, 2020-12-03) 755b1c58 (tc/mqprio: json-ify output, 2020-12-02) 975c4944 (ip/netns: use flock when setting up /run/netns, 2020-11-27) fb054cb3 (uapi: update devlink.h, 2020-11-29) c95d63e4 (uapi: update devlink.h, 2020-11-29) cae2e929 (f_u32: fix compiler gcc-10 compiler warning, 2020-11-29) c0149839 (misc: fix compiler warning in ifstat and nstat, 2020-11-29) 2319db90 (tc: fix compiler warnings in ip6 pedit, 2020-11-29) 5bdc4e91 (bridge: fix string length warning, 2020-11-29) f8176999 (devlink: fix uninitialized warning, 2020-11-29) 7a49ff9d (bridge: report correct version, 2020-11-15) 8682f588 (tc-mpls: fix manpage example and help message string, 2020-11-02) 7c7a0fe0 (tc-vlan: fix help and error message strings, 2020-11-02) 72f88bd4 (uapi: update kernel headers from 5.10-rc2, 2020-11-08) b90c39be (rdma: fix spelling error in comment, 2020-11-08) c8424b73 (man: fix spelling errors, 2020-11-08) cbf64817 (tc/m_gate: fix spelling errors, 2020-11-08) 14b189f0 (uapi: updates from 5.10-rc1, 2020-11-03) 9fc5bf73 (libnetlink: define __aligned conditionally, 2020-10-26) eb12cc9a (Merge branch 'main' into next, 2020-10-25) f1298d76 (m_mpls: test the 'mac_push' action after 'modify', 2020-10-22) 2b7a7684 (Merge branch 'tipc-encryption' into next, 2020-10-20) 2bf1ba5a (tipc: add option to set rekeying for encryption, 2020-10-16) 5fb36818 (tipc: add option to set master key for encryption, 2020-10-16) b4edd6a8 (Merge branch 'tc-mpls-l2-vpn' into next Guillaume Nault says:, 2020-10-20) 02a261b5 (m_mpls: add mac_push action, 2020-10-19) d61167dd (m_vlan: add pop_eth and push_eth actions, 2020-10-19) 3342688a (devlink: display elapsed time during flash update, 2020-10-14) cb7ce51c (v5.9.0, 2020-10-15) b5a583fb (Merge branch 'main' into next Signed-off-by: David Ahern <dsahern@gmail.com>, 2020-10-11) 78120128 (genl: ctrl: print op -> policy idx mapping, 2020-10-03) 91c54917 (Merge branch 'bridge-igmpv3-mldv2' into next Nikolay Aleksandrov says:, 2020-10-11) 86588450 (bridge: mdb: print protocol when available, 2020-10-08) 2de81d1e (bridge: mdb: print source list when available, 2020-10-08) 1d28c480 (bridge: mdb: print filter mode when available, 2020-10-08) e331677e (bridge: mdb: show igmpv3/mldv2 flags, 2020-10-08) f94e8b07 (bridge: mdb: print fast_leave flag, 2020-10-08) 547b3197 (bridge: mdb: add support for source address, 2020-10-08) f905191a (Update kernel headers, 2020-10-11) 4322b13c (ip xfrm: support setting XFRMA_SET_MARK_MASK attribute in states, 2020-10-02) 8dc1db80 (devlink: Add health reporter test command support, 2020-10-01) 01216471 (devlink: support setting the overwrite mask attribute, 2020-09-30) 34be2d26 (Update kernel headers, 2020-10-07) d2be31d9 (ss: add support for xdp statistics, 2020-09-24) f481515c (Update kernel headers, 2020-09-29) b8663da0 (ip: promote missed packets to the -s row, 2020-09-16) cec67df9 (Merge branch 'devlink-controller-external-info' into next Parav Pandit says:, 2020-09-22) 748cbad3 (devlink: Show controller number of a devlink port, 2020-09-18) 8fadd011 (devlink: Show external port attribute, 2020-09-18) 454429e8 (Update kernel headers, 2020-09-22) ad34d5fa (iproute2: ss: add support to expose various inet sockopts, 2020-08-19) c8eb4b52 (Update kernel headers, 2020-09-08) abee772f (tipc: support 128bit node identity for peer removing, 2020-08-27) 6fd53b2a (iplink: add support for protodown reason, 2020-08-28) af27494d (ip xfrm: support printing XFRMA_SET_MARK_MASK attribute in states, 2020-08-28) 275eed9b (Merge branch 'main' into next, 2020-09-01) cc889b82 (genl: ctrl: support dumping netlink policy, 2020-08-24) d5acae24 (libnetlink: add nl_print_policy() helper, 2020-08-24) 784fa9f6 (libnetlink: add rtattr_for_each_nested() iteration macro, 2020-08-24) OpenWrt patches unchanged. Successfully built for ramips/mt7621 and x86/geode with: CONFIG_PACKAGE_devlink=m CONFIG_PACKAGE_genl=m CONFIG_PACKAGE_ip-bridge=m CONFIG_PACKAGE_ip-full=m CONFIG_PACKAGE_ip-tiny=m CONFIG_PACKAGE_nstat=m CONFIG_PACKAGE_rdma=m CONFIG_PACKAGE_ss=m CONFIG_PACKAGE_tc=m Minimally run-tested ip-tiny on ramips/mt7621 (ubnt-erx). Signed-off-by: Russell Senior <russell@personaltelco.net>
* hostapd: do not restart hostapd instance on wireless restartsFelix Fietkau2020-12-312-2/+2
| | | | | | Add the flag that prevents netifd from killing hostapd/wpa_supplicant Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2020-12-311-3/+3
| | | | | | 39fb8c3edc74 wireless: add support for not killing processes on teardown Signed-off-by: Felix Fietkau <nbd@nbd.name>
* vxlan: allow for dynamic source ip selection (FS#3426)Johannes Kimmel2020-12-312-25/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By setting 'auto', the zero address or the empty string as source address (option ipaddr, option ip6addr), vxlan will choose one dynamically. This helps in setups where a wan ip or prefix changes. This corresponse to setting up an vxlan tunnel with: proto vxlan6: # ip link add vx0 type vxlan id ID local :: ... proto vxlan: # ip link add vx0 type vxlan id ID local 0.0.0.0 ... While it is possible to not specify a source ip at all, the kernel will default to setting up a ipv4 tunnel. The kernel will take any hint from source and peer ips to figure out, what tunnel type to use. To make sure we setup an ipv6 tunnel for proto vxlan6, this workaround is needed. This will not change the behaviour of currently working configurations. However this will allow former broken configurations, namely those not specifying both a source address and tunnel interface, to setup a tunnel interface. Previously those configurations weren't reporting an error and were stueck in a setup loop like in Bug FS#3426. This change lifts the currently very strict behaviour and should fix the following bug: Fixes: FS#3426 Ref: https://bugs.openwrt.org/index.php?do=details&task_id=3426 Signed-off-by: Johannes Kimmel <fff@bareminimum.eu>
* ath79: Add support for OpenMesh OM5PSven Eckelmann2020-12-302-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications: ====================== * Qualcomm/Atheros AR9344 rev 2 * 560/450/225 MHz (CPU/DDR/AHB) * 64 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2x 10/100 Mbps Ethernet * 2T2R 5 GHz Wi-Fi * 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x fast ethernet - eth0 + builtin switch port 1 + used as LAN interface - eth1 + 18-24V passive POE (mode B) + used as WAN interface * 12-24V 1A DC * internal antennas WAN/LAN LEDs appear to be wrong in ar71xx and have been swapped here. Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin Signed-off-by: Sven Eckelmann <sven@narfation.org> [add LED swap comment] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: Add support for OpenMesh OM2P v2Sven Eckelmann2020-12-302-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications: ====================== * Qualcomm/Atheros AR9330 rev 1 * 400/400/200 MHz (CPU/DDR/AHB) * 64 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2x 10/100 Mbps Ethernet * 1T1R 2.4 GHz Wi-Fi * 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x fast ethernet - eth0 + builtin switch port 1 + used as LAN interface - eth1 + 18-24V passive POE (mode B) + used as WAN interface * 12-24V 1A DC * external antenna Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin Signed-off-by: Sven Eckelmann <sven@narfation.org>
* ath79: Add support for OpenMesh OM2P-LCSven Eckelmann2020-12-302-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications: ====================== * Qualcomm/Atheros AR9330 rev 1 * 400/400/200 MHz (CPU/DDR/AHB) * 64 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2x 10/100 Mbps Ethernet * 1T1R 2.4 GHz Wi-Fi * 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x fast ethernet - eth0 + builtin switch port 1 + used as LAN interface - eth1 + 18-24V passive POE (mode B) + used as WAN interface * 12-24V 1A DC * internal antennas Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin Signed-off-by: Sven Eckelmann <sven@narfation.org>
* odhcp6c: update to git HEADHans Dedecker2020-12-301-3/+3
| | | | | | | eac1961 dhcpv6: fix displaying IA info 0475e18 dhcpv6: display status code as a string Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* base-files: sysupgrade: add function for conffiles retrievalAdrian Schmutzler2020-12-302-8/+13
| | | | | | | | | | | | The find command to retrieve files from /etc/sysupgrade.conf and /lib/upgrade/keep.d/* is used twice in almost the same way. Move it into a function to consolidate, enhance readability and make future adjustments easier. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Paul Spooren <mail@aparcar.org> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
* busybox: define BUSYBOX_SYM before the first useMaxim Storchak2020-12-291-4/+4
| | | | | | Since PKG_FILE_MODES relies on BUSYBOX_SYM, it should be defined early enough Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 17:47:23 +0000