aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
...
* elfutils: fix install .so globMatt Merhar2019-02-261-3/+3
| | | | | | | Only libelf was being packaged correctly - libdw and libasm included just the symlinks. Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
* sunxi: add support for Orange Pi OneAleksander Jan Bajkowski2019-02-261-0/+7
| | | | | | | | | | | CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 512MB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard header: SPI, I2C, GPIO, UART USB 2.0: One USB 2.0 HOST, One USB 2.0 OTG Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* ath10k-ct: fix incorrect multicast/broadcast rate settingSven Eckelmann2019-02-264-2/+82
| | | | | | | | | | | | | | | | | If no mcast_rate is set for the wifi-iface then there is no rate_idx (0) set for the bss. This can break for example 5GHz meshpoint interfaces because 0 maps to a CCK rate (11Mbit/s). It must also be avoided that the ath10k-ct internal state for the rates is not synced with the mac80211 rates state. Otherwise, the user specified rate (e.g. a wifi-iface mcast_rate for a meshpoint interface) will only be set on startup. And a short while after that, ath10k-ct specific code in ath10k_check_apply_special_rates is missing a valid rate in its own structures and is then recalculating a new default rate. This default rate is in most situations not the requested rate. Fixes: 4df3c71cd4c5 ("ath10k-ct: Update to 2018-12-11 and use version based on 4.19") Signed-off-by: Sven Eckelmann <sven@narfation.org>
* mac80211: ath10k: fix incorrect multicast/broadcast rate settingSven Eckelmann2019-02-262-1/+44
| | | | | | | | | If no mcast_rate is set for the wifi-iface then there is no rate_idx (0) set for the bss. This breaks for example 5GHz meshpoint interfaces because 0 maps to a CCK rate (11Mbit/s). Fixes: db90c243a0b9 ("mac80211: update to version based on 4.19-rc4") Signed-off-by: Sven Eckelmann <sven@narfation.org>
* mac80211: Add WDS / 4addr fix for ath10k supported devicesHauke Mehrtens2019-02-261-0/+107
| | | | | | | | | | This should fix the WDS / 4addr mode with ath10k and probably other devices. This patch was found here: https://patchwork.kernel.org/patch/10692383/ Fixes: d9eefa7a7031 ("mac80211: rebase ontop of v4.18.5") Reported-by: Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: rt2x00: fix crash on release_firmwareStanislaw Gruszka2019-02-262-5/+5
| | | | | | | | | | Fix crash due to passing invalid r2x00dev->eeprom_file pointer to release_firmware(). Since we copy eeprom data with EEPROM_SIZE in rt2800_read_eeprom() we can use eeprom_file->size as marker if the file was crated by request_firmware(). Acked-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
* mt76: update to the latest versionFelix Fietkau2019-02-261-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 28d81ff mt76x0: eeprom: fix VHT mcs{8,9} rate power offset 6e33ce6 mt76: move mt76_mcu_msg_alloc in mt76-core 4637f95 mt76: move mt76_mcu_get_response in mt76-core 1763cb0 mt76: move mt76_mcu_rx_event in mt76-core 4db9d75 mt76x0: mcu: remove useless commented configuration 91d0455 mt76: move mt76_dma_tx_queue_skb_raw in mt76-core module 0e8e53f mt76: remove add_buf pointer in mt76_queue_ops db47920 mt7603: rely on mt76_mcu_msg_alloc routine 471c447 mt7603: rely on mt76_mcu_get_response routine cacc986 mt7603: rely on mt76_mcu_rx_event routine 11ab620 mt7603: rely on mt76_tx_queue_skb_raw common routine 82fa312 mt7603: move alloc_dev common code in mt76_alloc_device 47d5922 mt76: move alloc_device common code in mt76_alloc_device c50c993 mt76x2u: remove mt76x2u_alloc_device routine 6ed5b7a mt76x0: remove mt76x0u_alloc_device routine e32e249 mt76x2: remove mt76x2_alloc_device routine 6aacd1e mt76: change the return type of mt76_dma_attach() a10e9e5 mt76x02u: use usb_bulk_msg to upload firmware a774ff6 mt76: usb: fix possible NULL pointer dereference in mt76u_mcu_deinit c2877bc mt76: usb: fix possible memory leak in mt76u_buf_free a5cfe96 mt76: usb: do not run mt76u_queues_deinit twice 1e4db14 mt76: usb: move mt76u_check_sg in usb.c 302406b mt76: usb: do not use sg buffers for mcu messages 8ab5267 mt76: usb: use a linear buffer for tx/rx datapath if sg is not supported a0a3505 mt76: usb: introduce disable_usb_sg parameter 0cee180 mt76: usb: use dev_err_ratelimited instead of dev_err in mt76u_complete_rx 1bb97c4 mt76x02u: remove bogus check and comment padding 2cbc2d4 mt76: Use the correct hweight8() function f18e03a mt76x0u: fix suspend/resume 6231336 mt76: mt76x02: fix TSF sync mode 783da04 mt76: mt76x02: fix beacon timer drift adjustment 43d2507 mt76: mt76x02: fix beacon timer issue 59a6587 mt76: mt76x02: only reset beacon drift counter when enabling beacons 8c8eb98 mt76: mt76x02: issue watchdog reset on MCU request timeout 52161d2 mt76: mt76x02: fix ED/CCA enabling/disabling 5e7ecce mt76: mt76x2: unify mt76x2[u]_mac_resume 18af219 mt76: mt76x02: set MT_TXOP_HLDR_TX40M_BLK_EN for mt76x2 e5747b2 mt76usb: allow mt76u_bulk_msg be used for reads 2437a9a mt76usb: use synchronous msg for mcu command responses e4250c9 mt76usb: remove usb_mcu.c 8b1110e mt76: usb: fix warning in mt76u_buf_free 89215f6 mt76: usb: introduce mt76u_fill_bulk_urb routine 523e374 mt76: usb: simplify rx buffer allocation ffe1292 mt76: usb: simplify mt76u_tx_build_sg routine e2a9d40 mt7603: fix ba window size selection b040ef7 mt76: remove no longer used routine declarations 645ef43 mt76: usb: check urb->num_sgs limit in mt76u_process_rx_entry fd315bd mt7603: disable dynamic sensitivity adjustment by default Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-envtools: add support for ALFA Network AP120C-ACPiotr Dymacz2019-02-261-3/+4
| | | | | | While at it, fix alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ipq-wifi: add board-2.bin for ALFA Network AP120C-ACPiotr Dymacz2019-02-262-1/+2
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* odhcpd: update to latest git HEAD (FS#2142)Hans Dedecker2019-02-251-3/+3
| | | | | | | | 9e9389c dhcpv4: fix adding assignment in list (FS#2142) e69265b dhcpv4: fix static lease lookup afbd7dd dhcp: rework assignment free logic Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: fix kmod-input-touchscreen-ads7846 depsStijn Tintel2019-02-251-1/+1
| | | | | | | | | | On targets that don't have input support enabled in the kernel config, building kmod-input-touchscreen-ads7846 fails due to a missing dependency on kmod-input-core. Add the dependency to fix this. Fixes: 77a54bbf13bf ("kernel: add kmod-input-touchscreen-ads7846") Reported-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* package/dnsmasq: add max_ttl/min_cache_ttl/max_cache_ttlAlexander Couzens2019-02-242-1/+4
| | | | | | | | | max_ttl - limit the ttl in the dns answer if greater as $max_ttl min_cache_ttl - force caching of dns answers even the ttl in the answer is lower than the $min_cache_ttl max_cache_ttl - cache only dns answer for $max_cache_ttl. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* kernel: add kmod-input-touchscreen-ads7846Stijn Tintel2019-02-241-0/+19
| | | | | | | This module adds support for ADS7846 based touchscreens used in devices like the WaveShare 3.5" and 4" LCD displays designed for Raspberry Pi. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: add kmod-fb-tft-ili9486Stijn Tintel2019-02-241-0/+16
| | | | | | | This module adds support for the ILI9486 LCD controller used in devices like the Waveshare 3.5" and 4" LCD displays designed for Raspberry Pi. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: add kmod-fb-tftStijn Tintel2019-02-241-0/+22
| | | | | | | | This module adds support for small TFT LCD display modules. While this module also exists in the 4.9 kernel, we are not going to support this kernel in the next major release, so don't make it available for 4.9. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: add kmod-fb-sys-ramStijn Tintel2019-02-241-10/+27
| | | | | | | | | | | The kernel modules that provide support for framebuffers in system RAM are currently included in the kmod-drm-imx package. Move them to a separate package, so that other modules can depend on them. Increase the autoload order of the drm-imx* packages to load the modules after loading the fb modules they depend on. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: add kmod-iio-ccs811Stijn Tintel2019-02-231-0/+17
| | | | | | | This module supports the AMS CCS811 VOC sensor. Tested on Raspberry Pi Zero W and ODROID C2. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* dnsmasq: prefer localuse over resolvfile guessworkYousong Zhou2019-02-232-5/+5
| | | | | | | | | This makes it clear that localuse when explicitly specified in the config will have its final say on whether or not the initscript should touch /etc/resolv.conf, no matter whatever the result of previous guesswork would be Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* mac80211: backport more brcmfmac changes queued for the 5.1Rafał Miłecki2019-02-2017-8/+4648
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq-wifi: update ipq-wifi for Linksys EA6350v3Oever González2019-02-201-0/+0
| | | | | | | | | | This commit updates the file "board-linksys_ea6359v3". Without this commit, the Linksys EA6350v3 will experience poor wireless performance in both bands. With this patch, wireless performace will be comparable to the performance of the stock firmware. Signed-off-by: Oever González <notengobattery@gmail.com>
* firmware: ipq-wifi: mark packages as nonsharedChristian Lamparter2019-02-201-0/+1
| | | | | | | | | | | The board-files are specific to the target and device. Hence they need to be set as nonshared. Otherwise they do not show up on the package repository. This causes problems for imagebuilder, if it needs to build a image for a specific device that hasn't had the time to have get its boardfile upstream. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uqmi: fix PIN_STATUS_FAILED error with MC7455 WCDMA/LTE modemDaniel Golle2019-02-202-2/+2
| | | | | | | | | | | Apparently this modem replies differently to attempted --get-pin-status which makes the script fail if a pincode is set. Fix this. Manufacturer: Sierra Wireless, Incorporated Model: MC7455 Revision: SWI9X30C_02.24.05.06 r7040 CARMD-EV-FRMWR2 2017/05/19 06:23:09 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: add Multi-AP patches and config optionsArnout Vandecappelle (Essensium/Mind)2019-02-2020-25/+2235
| | | | | | | | | | | | | | | | | | | | | | | | | | Cherry-pick Multi-AP commits from uptream: 9c06f0f6a hostapd: Add Multi-AP protocol support 5abc7823b wpa_supplicant: Add Multi-AP backhaul STA support a1debd338 tests: Refactor test_multi_ap bfcdac1c8 Multi-AP: Don't reject backhaul STA on fronthaul BSS cb3c156e7 tests: Update multi_ap_fronthaul_on_ap to match implementation 56a2d788f WPS: Add multi_ap_subelem to wps_build_wfa_ext() 83ebf5586 wpa_supplicant: Support Multi-AP backhaul STA onboarding with WPS 66819b07b hostapd: Support Multi-AP backhaul STA onboarding with WPS 8682f384c hostapd: Add README-MULTI-AP b1daf498a tests: Multi-AP WPS provisioning Add support for Multi-AP to the UCI configuration. Every wifi-iface gets an option 'multi_ap'. For APs, its value can be 0 (multi-AP support disabled), 1 (backhaul AP), 2 (fronthaul AP), or 3 (fronthaul + backhaul AP). For STAs, it can be 0 (not a backhaul STA) or 1 (backhaul STA, can only associate with backhaul AP). Also add new optional parameter to wps_start ubus call of wpa_supplicant to indicate that a Multi-AP backhaul link is required. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* mac80211: rt2x00: replace pending by merged patchesDaniel Golle2019-02-205-5/+10
| | | | | | | | | | | Those have by now been merged into wireless-drivers-next: 17ae2acd1a6f rt2x00: remove unneeded check 5991a2ecd070 rt2x00: remove confusing AGC register 9ad3b5565445 rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band 7aca14885ede rt2800: enable TX_PIN_CFG_RFRX_EN only for MT7620 c7ff1bfeaf1c rt2800: comment and simplify AGC init for RT6352 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86: Make kmod-drm-radeon and kmod-drm-amdgpu depend on x86Hauke Mehrtens2019-02-201-2/+2
| | | | | | | | | Currently these kernel packages only work on x86, restrict them to that target. Fixes: 2f239c02a031 ("x86: video: add amdgpu DRM kernel package") Fixes: 2f6918ee9be9 ("x86: video: add radeon DRM module support") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "iproute2: use tc package variant to limit other package sizes"Hans Dedecker2019-02-191-9/+0
| | | | | | | | This reverts commit e6d84fa8864e7bbbcec139dd09a2922a06f5b2a0 as it breaks the installation of the iproute2 utilities ip-bridge, ss, nstat, devlink and rdma for the ip-full variant Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "iproute2: simplify linking libelf for eBFP/XDP object file support"Hans Dedecker2019-02-193-21/+61
| | | | | | | | This reverts commit 26681fa6a6fcbec0024906eb8367e9a3160521fb as it breaks the installation of the iproute2 utilities ip-bridge, ss, nstat, devlink and rdma for the ip-full variant Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "iproute2: tc: enable and fix support for using .so plugins"Hans Dedecker2019-02-192-107/+1
| | | | | | | | This reverts commit fc80ef3613465e60257a5ddf0674debe45b09180 as it breaks the installation of the iproute2 utilities ip-bridge, ss, nstat, devlink and rdma for the ip-full variant Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "iproute2: tc: reduce size of dynamic symbol table"Hans Dedecker2019-02-192-45/+1
| | | | | | | | This reverts commit 248797834bf21916ddf663edc96d86ee5377850e as it breaks the installation of the iproute2 utilities ip-bridge, ss, nstat, devlink and rdma for the ip-full variant Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: allow using dnsmasq as the sole resolverYousong Zhou2019-02-192-16/+16
| | | | | | | | | | | | | | | | | | | | Currently it seems impossible to configure /etc/config/dhcp to achieve the following use case - run dnsmasq with no-resolv - re-generate /etc/resolv.conf with "nameserver 127.0.0.1" Before this change, we have to set resolvfile to /tmp/resolv.conf.auto to achive the 2nd effect above, but setting resolvfile requires noresolv being false. A new boolean option "localuse" is added to indicate that we intend to use dnsmasq as the local dns resolver. It's false by default and to align with old behaviour it will be true automatically if resolvfile is set to /tmp/resolv.conf.auto Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Acked-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: rt2x00: backport accepted and pending patches from upstreamDaniel Golle2019-02-1962-201/+1516
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | backport from wireless-drivers-next, replacing some existing patches in our tree (marked with '=' are those which were already present): f483039cf51a rt2x00: use simple_read_from_buffer() =5c656c71b1bf rt2800: move usb specific txdone/txstatus routines to rt2800lib =0b0d556e0ebb rt2800mmio: use txdone/txstatus routines from lib =5022efb50f62 rt2x00: do not check for txstatus timeout every time on tasklet =adf26a356f13 rt2x00: use different txstatus timeouts when flushing =0240564430c0 rt2800: flush and txstatus rework for rt2800mmio 6eba8fd22352 rt2x00: rt2400pci: mark expected switch fall-through 10bb92217747 rt2x00: rt2500pci: mark expected switch fall-through 916e6bbcfcff rt2x00: rt2800lib: mark expected switch fall-throughs 641dd8068ecb rt2x00: rt61pci: mark expected switch fall-through 750afb08ca71 cross-tree: phase out dma_zalloc_coherent() =c2e28ef7711f rt2x00: reduce tx power to nominal level on RT6352 a4296994eb80 rt2x00: Work around a firmware bug with shared keys 2587791d5758 rt2x00: no need to check return value of debugfs_create functions pending on linux-wireless: rt2x00: remove unneeded check rt2x00: remove confusing AGC register rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band rt2800: enable TX_PIN_CFG_RFRX_EN only for MT7620 rt2800: comment and simplify AGC init for RT6352 rt2x00: do not print error when queue is full rt2800: partially restore old mmio txstatus behaviour rt2800: new flush implementation for SoC devices rt2800: move txstatus pending routine rt2800mmio: fetch tx status changes rt2800mmio: use timer and work for handling tx statuses timeouts rt2x00: remove last_nostatus_check rt2x00: remove not used entry field rt2x00mmio: remove legacy comment While at it also rename some existing patches now that there are separate folders with patches for each driver to make things a bit nicer to handle. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* odhcpd: update to latest git HEADHans Dedecker2019-02-181-3/+3
| | | | | | | | | | | | | | | | | | | 1f01299 config: fix build failure in case DHCPv4 support is disabled 67b3a14 dhcpv4: fix assignment of requested IP address ca8ba91 dhcp: rework static lease logic 36833ea dhcpv6: rapid commit support 1ae316e dhcpv6: fix parsing of DHCPv6 relay messages 80157e1 dhcpv4: fix compile issue 671ccaa dhcpv6-ia: move function definitions to odhcpd.h 0db69b0 dhcpv6: improve code readibility 7847b27 treewide: unify dhcpv6 and dhcpv4 assignments a54cee0 netlink: rework handling of netlink messages 9f25dd8 treewide: use avl tree to store interfaces f21a0a7 treewide: align syslog tracing edc5fb0 dhcpv6-ia: add full CONFIRM support 9d6eadf dhcpv6-ia: rework append_reply() Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* samba36: allow build with no ipv6 supportRosy Song2019-02-171-1/+2
| | | | Signed-off-by: Rosy Song <rosysong@rosinson.com>
* uboot-kirkwood: update to 2019.01Paul Wassi2019-02-1710-80/+83
| | | | | | Update U-Boot to current 2019.01 release for kirkwood platform Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* kernel: Added required dependencies for socket match.Oldřich Jedlička2019-02-171-0/+2
| | | | | | | | | | | | | | This applies to kernel 4.10 and newer. See https://github.com/torvalds/linux/commit/8db4c5be88f62ffd7a552f70687a10c614dc697b The above commit added to kernel 4.10 added new dependency for building the NETFILTER_XT_MATCH_SOCKET (xt_socket.ko) module. The NF_SOCKET_IPVx options (both of them) need to be enabled in order to build the NETFILTER_XT_MATCH_SOCKET module. Without the change the module is not built. Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
* x86: video: add amdgpu DRM kernel packageLucian Cristian2019-02-171-0/+22
| | | | | | build amdgpu kernel as modules so it will find the firmware files Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* x86: video: add radeon DRM module supportLucian Cristian2019-02-171-0/+14
| | | | | | add radeon module support so firmware can be loaded from userland Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* linux-firmware: DRM: add amdgpu firmwareLucian Cristian2019-02-171-0/+9
| | | | | | add firmware needed for amdgpu DRM display Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* linux-firmware: DRM: add radeon firmwareLucian Cristian2019-02-171-0/+9
| | | | | | add firmware needed for radeon DRM display Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* strace: Only allow libdw or libunwindHauke Mehrtens2019-02-171-9/+11
| | | | | | | | These two dependencies are mutual exclusive and it is only possible to select one of them, change the select to a chose so it is only possible to select one of them in OpenWrt menu config. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* strace: fix configuration optionsPeter Wagner2019-02-171-6/+14
| | | | Signed-off-by: Peter Wagner <tripolar@gmx.at>
* elfutils: fix DEPENDS for libelfPeter Wagner2019-02-171-2/+2
| | | | Signed-off-by: Peter Wagner <tripolar@gmx.at>
* sunxi: add support for Sinovoip Banana Pi M2 PlusPawel Dembicki2019-02-171-0/+7
| | | | | | | | | | | | | | | | | | | CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 1GB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard: Network 10/100M Ethernet RJ45 (Realtek RTL8211E) Onboard: Network BT4.0/WiFi 802.11 b/g/n (Ampak AP6212) Onboard header: SPI, I2C, GPIO, UART USB 2.0: Two USB 2.0 HOST, One USB 2.0 OTG Untested: Audio, Video Not working: Bluetooth Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* linux-firmware: broadcom: package 43430a0 FullMAC firmwarePawel Dembicki2019-02-171-0/+9
| | | | Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* openssl: patch to fix devcrypto sessions leakEneas U de Queiroz2019-02-171-0/+115
| | | | | | | | Applies a patch from https://github.com/openssl/openssl/pull/8213 that fixes an error where open /dev/crypto sessions were not closed. Thanks to Ansuel Smith for reporting it. Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
* build: remove leftovers from previous x86 commitsTomasz Maciej Nowak2019-02-171-2/+2
| | | | | | | | | | | | | | | | | VBoxManage is not used and the image is created with proper permisions: 0f5d0f6 image: use internal qemu-img for vmdk and vdi images drop host dependencies on qemu-utils and VirtualBox Unreachable config symbols: 9e0759e x86: merge all geode based subtargets into one No need to define those symbols since x86_64 is subtarget of x86: 196fb76 x86: make x86_64 a subtarget instead of a standalone target Unreachable config symbols, so remove GRUB_ROOT: 371b382 x86: remove the xen_domu subtarget Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* mdadm: Update to 4.1Rosen Penev2019-02-174-11/+11
| | | | | | Tested on GnuBee PC1. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* iw: update to 5.0.1Deng Qingfang2019-02-175-664/+83
| | | | | | | | | | | | | Refresh patches MIPS IPK size increases: iw-tiny: +3k iw-full: +10k Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn> [Remove sha256, nan, bloom, measurements and ftm from tiny version] [sync nl80211 between backports and iw] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: update to version 4.19.23-1Hauke Mehrtens2019-02-1734-702/+64
| | | | | | | | This updates mac80211 to backports version 4.19.23-1 which includes all the stable fixes from kernel 4.19.23. The removed patches are included in this version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* dnsmasq: ensure test and rc order as older than final releasesJonas Gorski2019-02-171-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | Opkg treats text after a version number as higher than without: ~# opkg compare-versions "2.80rc1" "<<" "2.80"; echo $? 1 ~# opkg compare-versions "2.80rc1" ">>" "2.80"; echo $? 0 This causes opkg not offering final release as upgradable version, and even refusing to update, since it thinks the installed version is higher. This can be mitigated by adding ~ between the version and the text, as ~ will order as less than everything except itself. Since 'r' < 't', to make sure that test will be treated as lower than rc we add a second ~ before the test tag. That way, the ordering becomes 2.80~~test < 2.80~rc < 2.80 which then makes opkg properly treat prerelease versions as lower. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>