| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch makes some improvements to the MT7620 RF calibration.
1. Move MT7620 PA/LNA calibration code to dedicated functions.
2. Restore RF and BBP registers before R-Calibration.
3. Do Rx DCOC calibration again before RXIQ calibration.
4. Use SoC specific AGC initial LNA value.
5. Correct MAC_RX_EN mask in rt2800_r_calibration()[1].
[1] This change may fix the "BBP/RF register access failed" error:
ieee80211 phy0: rt2800_wait_bbp_rf_ready: Error - BBP/RF register access failed, aborting
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
(cherry picked from commit 2824fa6963cf245b7e0b04aa96bcbe5013524b85)
|
|
|
|
|
|
|
|
|
|
|
| |
Always enable built-in 2.5G PHY on MT7988 for now, so that it can be
used. In future it would be nice to be able to switch power and MDIO
access via address 0 at run-time in Linux, both, to be able to use
external PHYs at address 0 and to reduce power consumption on systems
not using the built-in 2.5G PHY.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 33046d2a471ed687404a617c356b9cdf5652c2d6)
|
|
|
|
|
|
|
|
|
|
| |
The U-Boot build for the MT7988 reference board booting from SD card
wrongly depended on the 'ddr4' variant of the ARM TrustedFirmware-A build
even though the 'comb' variant is used. Fix that dependency.
Fixes: 572ea68070 ("uboot-mediatek: add patches for MT7988 and builds for RFB")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 78e3adcaf993cd1a58821a69efccfca8d380f754)
|
|
|
|
|
|
|
|
| |
While the v2 is nearly identical to v1, v3 uses a different PHY and
needs a different build for Ethernet to work in U-Boot.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit fff4441135ed9290eb2f947f931b826a60d6c167)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Select many potentially useful options for the MT7988 RFB U-Boot builds.
The resulting loader is intended as a development tool and intends to be
generic. It does *not* have a default bootcmd set, but allows to boot
pretty much everything, including EFI executables.
To install this U-Boot build to the eMMC:
opkg install mmc-utils partx-utils
mmc bootpart enable 1 1 /dev/mmcblk0
echo 0 > /sys/block/mmcblk0boot0/force_ro
dd if=*mediatek_mt7988a-rfb-nand-emmc-preloader.bin of=/dev/mmcblk0boot0
dd if=*mediatek_mt7988a-rfb-nand-emmc-gpt.bin of=/dev/mmcblk0
partx -a /dev/mmcblk0
dd if=*mediatek_mt7988a-rfb-nand-emmc-bl31-uboot.fip of=/dev/mmcblk0p3
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 1d5778e18d9a6bef26aff3a8594306fc45e9be76)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
7aefb47 jitterentropy-rngd: update to the v1.2.0
What's interesting about jitterentropy-rngd v1.2.0 release is that it
bumps its copy of jitterentropy-library from v2.2.0 to the v3.0.0. That
bump includes a relevant commit 3130cd9 ("replace LSFR with SHA-3 256").
When initializing entropy jent calculates time delta. Time values are
obtained using clock_gettime() + CLOCK_REALTIME. There is no guarantee
from CLOCK_REALTIME of unique values and slow devices often return
duplicated ones.
A switch from jent_lfsr_time() to jent_hash_time() resulted in many less
cases of zero delta and avoids ECOARSETIME.
Long story short: on some system this fixes:
[ 6.722725] urngd: jent-rng init failed, err: 2
This is important change for BCM53573 which doesn't include hwrng and
seems to have arch_timer running at 36,8 Hz.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit c74b5e09e692839b39c8325b5f8dc5f2a3b3896c)
|
|
|
|
|
|
|
|
| |
Announcement:
https://lists.gnu.org/archive/html/info-gnu/2023-06/msg00000.html
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit fabd8915698d9fb21aa80100a51e097505b61225)
|
|
|
|
|
|
|
|
|
| |
This reverts commit 23953cfa5afa2e8cd9e1c1475d065cb954d8ceb6.
01837 seems to be having multiple issues, one being broken multicast so
lets revert to the last version that was better for the stable branch.
Signed-off-by: Robert Marko <robimarko@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
bdf7ca5db707 wifi: mt76: mt7921: move common register definition in mt792x_regs.h
ae15d5c6b567 wifi: mt76: mt7921: convert acpisar and clc pointers to void
02515b6b90f0 wifi: mt76: mt7921: rename mt7921_vif in mt792x_vif
6ed8a8bdc7b6 wifi: mt76: mt7921: rename mt7921_sta in mt792x_sta
80234e64e7c5 wifi: mt76: mt7921: rename mt7921_phy in mt792x_phy
2485b4222d3d wifi: mt76: mt7921: rename mt7921_dev in mt792x_dev
c6fd7cde77e0 wifi: mt76: mt7921: rename mt7921_hif_ops in mt792x_hif_ops
1a1a57b5f8c4 wifi: mt76: mt792x: move shared structure definition in mt792x.h
68508aab4241 wifi: mt76: mt7921: move mt792x_mutex_{acquire/release} in mt792x.h
ff306af07e65 wifi: mt76: mt7921: move mt792x_hw_dev in mt792x.h
4b49d659acab wifi: mt76: mt7921: Replace fake flex-arrays with flexible-array members
93f821cce8f5 wifi: mt76: mt792x: introduce mt792x-lib module
de7b90721280 wifi: mt76: mt7921: move mac shared code in mt792x-lib module
c68ee8a64bef wifi: mt76: mt7921: move dma shared code in mt792x-lib module
8d561811f271 wifi: mt76: mt7921: move debugfs shared code in mt792x-lib module
0034ae289046 wifi: mt76: mt7921: move init shared code in mt792x-lib module
8419c4e793a7 wifi: mt76: mt792x: introduce mt792x_irq_map
b7c7fadf228c wifi: mt76: mt792x: move more dma shared code in mt792x_dma
0b1603ce707c wifi: mt76: mt7921: move hif_ops macro in mt792x.h
e07540abe87a wifi: mt76: mt7921: move shared runtime-pm code on mt792x-lib
3d65cd7a8dad wifi: mt76: mt7921: move runtime-pm pci code in mt792x-lib
4551f8c838e6 wifi: mt76: mt7921: move acpi_sar code in mt792x-lib module
bd84b8ebaff8 wifi: mt76: mt792x: introduce mt792x-usb module
7067ea0f1bab wifi: mt76: mt792x: move mt7921_load_firmware in mt792x-lib module
cf752af84c35 wifi: mt76: mt76_connac3: move lmac queue enumeration in mt76_connac3_mac.h
700041dcf773 wifi: mt76: mt792x: move MT7921_PM_TIMEOUT and MT7921_HW_SCAN_TIMEOUT in common code
58b2b90ad89b wifi: mt76: mt7921: move mt7921_dma_init in pci.c
9e4cb87a04cf wifi: mt76: mt7921: move mt7921u_disconnect mt792x-lib
c19b62fe6b68 wifi: mt76: testmode: add nla_policy for MT76_TM_ATTR_TX_LENGTH
4904ab2f87cd wifi: mt76: fix return value check in mt76x02_mac_process_rx
1f0fbbee359c wifi: mt76: mt7915: fix tlv length of mt7915_mcu_get_chan_mib_info
24a54ee3a5ec wifi: mt76: mt7915: fix power-limits while chan_switch
80b8bcf0e3ea wifi: mt76: mt7603: rework/fix rx pse hang check
a8d9553d8fc4 wifi: mt76: mt7603: improve watchdog reset reliablity
c03d84c0d018 wifi: mt76: mt7603: improve stuck beacon handling
85cc58378d25 wifi: mt76: mt7603: add missing register initialization for MT7628
b14c2351ddb8 wifi: mt76: mt7603: disable A-MSDU tx support on MT7628
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 6b3737be323f702d5c1c5533db7d7351603dad0f)
|
|
|
|
|
|
|
|
| |
Fix compatible string to match what is supported upstream, fix alignment
and order MTD partitions according to offset.
Signed-off-by: Stefan Agner <stefan@agner.ch>
(cherry picked from commit 4af06aaf33c9256a5d3e960fa5f6bddab2674c5a)
|
|
|
|
| |
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
|
|
| |
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit e978072baaca ("Do prune_association only after the STA is
authorized") causes issues when an STA roams from one interface to
another interface on the same PHY. The mt7915 driver is not able to
handle this properly. While the commits fixes a DoS, there are other
devices and drivers with the same limitation, so revert to the orginal
behavior for now, until we have a better solution in place.
Fixes: #13156
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit 324673914d42f5fb9b70cc73e955117828b99f3b)
|
|
|
|
|
|
|
| |
Support for PF_XDP sockets monitoring interface used by the ss tool.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 06e64f9b364abe15c27bf0a7225fcac740819668)
|
|
|
|
|
|
|
| |
Add u-boot env config for Xiaomi mi-mini for using fw_printenv and fw_setenv on this board
Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
(cherry picked from commit a87bc138cfccd8de06afaad81f7ba838a87fe4f8)
|
|
|
|
|
|
|
|
|
|
| |
This updates the Intel iwlwifi firmware for AX200 and AX210 from version
66 to version 72. Version 72 is the latest version supported by iwlwifi
from kernel 6.1.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 00ce1c05877ac38f5ff00c1c2ce3468d5168f76c)
|
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit adfeda849198b33ffa7a7ef233ae8a4df22bbc2d)
|
|
|
|
|
|
|
|
|
|
| |
Instead of reading only a single 4kiB page, read the first 128kiB to
determine the size of an uImage.FIT using 'imsz' or 'imszb'.
This will be needed once we add more Device Tree Overlays, which may
happen for the BPi-R3 mini.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 3c2f7bb555c2cd5c4be8aed11b9d31b48cc0bcf8)
|
|
|
|
|
|
|
| |
Resolve conflicts with the uuid type from darwin system headers
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 16c37ba9136ff431c7e3c97cc27e4ea166b8020a)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Debian changelog:
intel-microcode (3.20230808.1) unstable; urgency=high
* New upstream microcode datafile 20230808 (closes: #1043305)
Mitigations for "Downfall" INTEL-SA-00828 (CVE-2022-40982),
INTEL-SA-00836 (CVE-2023-23908) and INTEL-SA-00837 (CVE-2022-41804)
* Updated microcodes:
sig 0x00050653, pf_mask 0x97, 2023-03-23, rev 0x1000181, size 36864
sig 0x00050654, pf_mask 0xb7, 2023-03-06, rev 0x2007006, size 44032
sig 0x00050656, pf_mask 0xbf, 2023-03-17, rev 0x4003604, size 38912
sig 0x00050657, pf_mask 0xbf, 2023-03-17, rev 0x5003604, size 38912
sig 0x0005065b, pf_mask 0xbf, 2023-03-21, rev 0x7002703, size 30720
sig 0x000606a6, pf_mask 0x87, 2023-03-30, rev 0xd0003a5, size 297984
sig 0x000706e5, pf_mask 0x80, 2023-02-26, rev 0x00bc, size 113664
sig 0x000806c1, pf_mask 0x80, 2023-02-27, rev 0x00ac, size 111616
sig 0x000806c2, pf_mask 0xc2, 2023-02-27, rev 0x002c, size 98304
sig 0x000806d1, pf_mask 0xc2, 2023-02-27, rev 0x0046, size 103424
sig 0x000806e9, pf_mask 0xc0, 2023-02-22, rev 0x00f4, size 106496
sig 0x000806e9, pf_mask 0x10, 2023-02-23, rev 0x00f4, size 105472
sig 0x000806ea, pf_mask 0xc0, 2023-02-23, rev 0x00f4, size 105472
sig 0x000806eb, pf_mask 0xd0, 2023-02-23, rev 0x00f4, size 106496
sig 0x000806ec, pf_mask 0x94, 2023-02-26, rev 0x00f8, size 106496
sig 0x000806f8, pf_mask 0x87, 2023-05-09, rev 0x2b0004b1, size 572416
sig 0x000806f7, pf_mask 0x87, 2023-05-09, rev 0x2b0004b1
sig 0x000806f6, pf_mask 0x87, 2023-05-09, rev 0x2b0004b1
sig 0x000806f5, pf_mask 0x87, 2023-05-09, rev 0x2b0004b1
sig 0x000806f4, pf_mask 0x87, 2023-05-09, rev 0x2b0004b1
sig 0x000806f8, pf_mask 0x10, 2023-05-15, rev 0x2c000271, size 605184
sig 0x000806f6, pf_mask 0x10, 2023-05-15, rev 0x2c000271
sig 0x000806f5, pf_mask 0x10, 2023-05-15, rev 0x2c000271
sig 0x000806f4, pf_mask 0x10, 2023-05-15, rev 0x2c000271
sig 0x00090672, pf_mask 0x07, 2023-04-18, rev 0x002e, size 220160
sig 0x00090675, pf_mask 0x07, 2023-04-18, rev 0x002e
sig 0x000b06f2, pf_mask 0x07, 2023-04-18, rev 0x002e
sig 0x000b06f5, pf_mask 0x07, 2023-04-18, rev 0x002e
sig 0x000906a3, pf_mask 0x80, 2023-04-18, rev 0x042c, size 219136
sig 0x000906a4, pf_mask 0x80, 2023-04-18, rev 0x042c
sig 0x000906e9, pf_mask 0x2a, 2023-02-23, rev 0x00f4, size 108544
sig 0x000906ea, pf_mask 0x22, 2023-02-23, rev 0x00f4, size 104448
sig 0x000906eb, pf_mask 0x02, 2023-02-23, rev 0x00f4, size 106496
sig 0x000906ec, pf_mask 0x22, 2023-02-23, rev 0x00f4, size 105472
sig 0x000906ed, pf_mask 0x22, 2023-02-27, rev 0x00fa, size 106496
sig 0x000a0652, pf_mask 0x20, 2023-02-23, rev 0x00f8, size 97280
sig 0x000a0653, pf_mask 0x22, 2023-02-23, rev 0x00f8, size 97280
sig 0x000a0655, pf_mask 0x22, 2023-02-23, rev 0x00f8, size 97280
sig 0x000a0660, pf_mask 0x80, 2023-02-23, rev 0x00f8, size 97280
sig 0x000a0661, pf_mask 0x80, 2023-02-23, rev 0x00f8, size 96256
sig 0x000a0671, pf_mask 0x02, 2023-02-26, rev 0x0059, size 104448
sig 0x000b0671, pf_mask 0x32, 2023-06-06, rev 0x0119, size 210944
sig 0x000b06a2, pf_mask 0xe0, 2023-06-06, rev 0x4119, size 216064
sig 0x000b06a3, pf_mask 0xe0, 2023-06-06, rev 0x4119
sig 0x000b06e0, pf_mask 0x11, 2023-04-12, rev 0x0011, size 136192
* source: update symlinks to reflect id of the latest release, 20230808
intel-microcode (3.20230512.1) unstable; urgency=medium
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit ced285487144e1138e3d2b986b3e070a9b4fd412)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
7be2766 (tag: 20230804) Merge branch 'rb3-update' of https://github.com/lumag/linux-firmware
66c1db8 Merge https://github.com/pkshih/linux-firmware
5046942 Mellanox: Add new mlxsw_spectrum firmware xx.2012.1012
5c7b67f linux-firmware: Add URL for latest FW binaries for NXP BT chipsets
29f185d rtw89: 8851b: update firmware to v0.29.41.1
742bf57 qcom: sdm845: add RB3 sensors DSP firmware
253cc17 amdgpu: Update DMCUB for DCN314 & Yellow Carp
07f05b0 Merge branch 'dmc-adlp_2.20-mtl_2.13' of git://anongit.freedesktop.org/drm/drm-firmware
5a251ed Merge branch 'for-upstream' of https://github.com/CirrusLogic/linux-firmware
6c8ce49 ice: add LAG-supporting DDP package
fd6e13c i915: Update MTL DMC to v2.13
41e615c i915: Update ADLP DMC to v2.20
c8424cf cirrus: Add CS35L41 firmware for Dell Oasis Models
b6ea35f copy-firmware: Fix linking directories when using compression
0a51959 copy-firmware: Fix test: unexpected operator
b602d43 qcom: sc8280xp: LENOVO: remove directory sym link
e0bad5e qcom: sc8280xp: LENOVO: Remove execute bits
59fbffa amdgpu: update VCN 4.0.0 firmware
22fb12f amdgpu: add initial SMU 13.0.10 firmware
b3f512f amdgpu: add initial SDMA 6.0.3 firmware
b1a7d76 amdgpu: add initial PSP 13.0.10 firmware
d6d655a amdgpu: add initial GC 11.0.3 firmware
c782458 Merge branch 'v2.0.21961' of https://github.com/yunfei-mtk/linux_fw_10bit
ca9086f Merge branch 'dg2_mtl_guc_70.8' of git://anongit.freedesktop.org/drm/drm-firmware
0bc3126 linux-firmware: Update AMD fam17h cpu microcode
b250b32 linux-firmware: Update AMD cpu microcode
9dfcace amdgpu: update green sardine VCN firmware
b519832 amdgpu: update renoir VCN firmware
5f569aa amdgpu: update raven VCN firmware
868bb36 amdgpu: update raven2 VCN firmware
6fa9a17 amdgpu: update Picasso VCN firmware
cd52460 amdgpu: update DMCUB to v0.0.175.0 for various AMDGPU ASICs
4ef7581 Updated NXP SR150 UWB firmware
2514504 Merge branch 'for-upstream' of https://github.com/CirrusLogic/linux-firmware
45f5ebf wfx: update to firmware 3.16.1
f41d890 mediatek: Update mt8195 SCP firmware to support 10bit mode
6f3a37f i915: update DG2 GuC to v70.8.0
0ee23bd i915: update to GuC 70.8.0 and HuC 8.5.1 for MTL
1a76e8b cirrus: Add CS35L41 firmware for ASUS ROG 2023 Models
d3f6606 Partially revert "amdgpu: DMCUB updates for DCN 3.1.4 and 3.1.5"
8917650 linux-firmware: update firmware for mediatek bluetooth chip (MT7922)
7d9af09 linux-firmware: update firmware for MT7922 WiFi device
0bab5df Merge tag 'iwlwifi-fw-2023-06-29' of http://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware
3ec3817 linux-firmware: Update firmware file for Intel Bluetooth AX203
7db3ef9 linux-firmware: Update firmware file for Intel Bluetooth AX203
5684048 linux-firmware: Update firmware file for Intel Bluetooth AX211
3f7a24e linux-firmware: Update firmware file for Intel Bluetooth AX211
eb2c745 linux-firmware: Update firmware file for Intel Bluetooth AX210
4a3ff0a linux-firmware: Update firmware file for Intel Bluetooth AX200
1d1bad4 linux-firmware: Update firmware file for Intel Bluetooth AX201
db39dff Fix qcom ASoC tglp WHENCE entry
a687f89 Merge branch 'sc8280xp-audio-fw' of git://git.kernel.org/pub/scm/linux/kernel/git/srini/linux-firmware
9e0343c check_whence: Check link targets are valid
b255f5b iwlwifi: add new FWs from core80-39 release
fa5d30b iwlwifi: update cc/Qu/QuZ firmwares for core80-39 release
f9a35b3 qcom: Add Audio firmware for SC8280XP X13s
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit bfbb5ccf7a55ed2cc574405f7f83da5e48811401)
|
|
|
|
|
|
|
|
| |
This only fixes minor problems.
Changelog: https://github.com/Mbed-TLS/mbedtls/releases/tag/v2.28.4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit d773fe5411cd4fdd8e107cfe338ed731001a1ade)
|
|
|
|
|
|
|
|
| |
3cda251 file: Fix uci -m import command
5781664 remove internal usage of redundant uci_ptr.last
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit d1427863bae1603eb3b8b385024f7ca11297503d)
|
|
|
|
|
|
|
|
|
| |
Add support for the SKBPRIO queuing discipline. This is subtly
different than prio as it also drops packets from the lower priority
flows.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
(cherry picked from commit 8fba9afda5f514afa48a216514b3f0b0fb22afac)
|
|
|
|
|
|
|
| |
This way is possible to mount nvme extroots.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
(cherry picked from commit 0fe9a8ca94830270820f7a1eb457f5d5d587125d)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This fixes building with USE_LTO enabled:
mold: error: undefined symbol: __memset
>>> referenced by <artificial>
>>> ./tmp/ccsgR7G6.ltrans10.ltrans.o
mold: error: undefined symbol: memset_orig
>>> referenced by <artificial>
>>> ./tmp/ccsgR7G6.ltrans10.ltrans.o
mold: error: undefined symbol: perf_regs_load
>>> referenced by <artificial>
>>> ./tmp/ccsgR7G6.ltrans15.ltrans.o:(test_dwarf_unwind__thread)
mold: error: undefined symbol: memset_erms
>>> referenced by <artificial>
>>> ./tmp/ccsgR7G6.ltrans10.ltrans.o
mold: error: undefined symbol: memcpy_orig
>>> referenced by <artificial>
>>> ./tmp/ccsgR7G6.ltrans10.ltrans.o
mold: error: undefined symbol: memcpy_erms
>>> referenced by <artificial>
>>> ./tmp/ccsgR7G6.ltrans10.ltrans.o
mold: error: undefined symbol: __memcpy
>>> referenced by <artificial>
>>> ./tmp/ccsgR7G6.ltrans10.ltrans.o
collect2: error: ld returned 1 exit status
make[5]: *** [Makefile.perf:670: ../openwrt/linux/tools/perf-target-x86_64_musl/perf] Error 1
make[4]: *** [Makefile.perf:238: sub-make] Error 2
make[3]: *** [Makefile:70: all] Error 2
make[2]: *** [Makefile:84: ./build_dir/target-x86_64_musl/linux-x86_64/linux-5.15.120/tools/perf-target-x86_64_musl/.built] Error 2
make[2]: Leaving directory './package/devel/perf'
time: package/devel/perf/compile#55.88#6.78#12.89
ERROR: package/devel/perf failed to build.
Signed-off-by: Javier Marcet <javier@marcet.info>
(cherry picked from commit 5ed185bfbd9719ef3b114fa6faeb343ac87b2490)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
colrm is already built, package just isn't generated.
colrm can be used to remove columns from file/stdin.
Use cases vary, personally I needed it because I build openwrt
natively - and wolfssl configure script wants either colrm, or cut
but busybox's cut isn't accepted.
Built: x86_64, latest git
Tested: x86_64, latest git
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
(cherry picked from commit e21b4c9636d5dc07b303aa568cbf31b76f244397)
|
|
|
|
|
|
|
|
|
|
|
| |
Safely detect integer overflow in try_addint() and try_subint().
Old code relied on undefined behavior, and recent versions of GCC on x86
optimized away the if-statements.
This caused integer overflow in Lua code instead of falling back to
floating-point numbers.
Signed-off-by: Adam Bailey <aebailey@gmail.com>
(cherry picked from commit 3a2e7c30d3e6a187ba1df740cdb24c8ad84dfe48)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
commit c0611b45a998 ("e2fsprogs: symlink e2fsck to fsck.ext{2, 3, 4},
and tune2fs to findfs") introduced a symlink from tune2fs to findfs.
This only works when the included private libblkid library is used, but
commit 5b1660a5387b ("utils/e2fsprogs: Update to 1.43.6") disabled the
usage of this private lib and enabled the shared lib support.
Removing this symlink makes it possible to install tune2fs and findfs
package.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
(cherry picked from commit 0b80c5725fd70bfd23701cd49fa9f252f6835506)
|
|
|
|
|
|
|
| |
c07ab2f iwinfo: update byte counter to 64bit
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 2486841c1bc7c3267e409b510e142e04cc5f0a5b)
|
|
|
|
|
|
|
| |
31c3907 file: strengthen exec access control
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 9d8d65322ce7d82ee20cc6dcca07506e7405c5f5)
|
|
|
|
|
|
|
|
|
|
|
| |
d1f07cf devices: add device id for Atheros AR9287 and AR9380
65ea345 nl80211: constify a few arrays
ca79f64 lib: report byte counters as 64 bit values
This contains an ABI change, increase the ABI version too.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit a226153067766db6d733aa3e330742c9da40c4f6)
|
|
|
|
|
|
|
|
| |
122a5e3 Revert "sysupgrade: print errno on failure"
2db8365 system: add RISC-V CPU info
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 359638098742d7573ff422f6dc7125c89086072b)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Changelog: https://lore.kernel.org/stable/2023080341-curliness-salary-4158@gregkh/
1. Needed to make a change to to package/kernel/linux/modules/netsupport.mk
due to upstream moving vxlan to its own directory[1]. @john-tho suggested
using the the 6.1 xvlan FILES to circumvent.
2. All patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.124&id=77396fa9096abdbfbb87d63e73ad44d5621cf103
Signed-off-by: John Audia <therealgraysky@proton.me>
[Refreshed on top of OpenWrt 23.05]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 81c1172c3626157ff9a146430cd14e32c9c80a5a)
|
|
|
|
|
|
|
|
|
|
| |
Changes between 3.0.9 and 3.0.10 [1 Aug 2023]
* Fix excessive time spent checking DH q parameter value ([CVE-2023-3817])
* Fix DH_check() excessive time with over sized modulus ([CVE-2023-3446])
* Do not ignore empty associated data entries with AES-SIV ([CVE-2023-2975])
Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
(cherry picked from commit 92602f823a5f29fee41209ccef53ddddb2e89222)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This fixes building with USE_LTO enabled:
aarch64-openwrt-linux-musl-gcc -fPIC -pthread -Wa,--noexecstack -Wall -O3 -Os -pipe -mcpu=cortex-a53 -fno-caller-saves -fno-plt -fhonour-copts -fmacro-prefix-map=/build_dir/target-aarch64_cortex-a53_musl/openssl-3.0.9=openssl-3.0.9 -ffunction-sections -fdata-sections -flto=auto -fno-fat-lto-objects -Wformat -Werror=format-security -DPIC -fPIC -fstack-protector-strong -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -DPIC -fPIC -Os -pipe -mcpu=cortex-a53 -fno-caller-saves -fno-plt -fhonour-copts -fmacro-prefix-map=/build_dir/target-aarch64_cortex-a53_musl/openssl-3.0.9=openssl-3.0.9 -ffunction-sections -fdata-sections -flto=auto -fno-fat-lto-objects -Wformat -Werror=format-security -fPIC -fstack-protector-strong -fPIC -fuse-ld=bfd -flto=auto -fuse-linker-plugin -fPIC -specs=/include/hardened-ld-pie.specs -znow -zrelro -L. -Wl,-z,defs -Wl,-znodelete -shared -Wl,-Bsymbolic -Wl,-z,now -Wl,-z,relro -L/staging_dir/toolchain-aarch64_cortex-a53_gcc-13.1.0_musl/usr/lib -L/staging_dir/toolchain-aarch64_cortex-a53_gcc-13.1.0_musl/lib -Wl,--gc-sections \
-o providers/legacy.so -Wl,--version-script=providers/legacy.ld \
providers/legacy-dso-legacyprov.o \
providers/liblegacy.a providers/libcommon.a -lcrypto -ldl -pthread
ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o: in function `legacy_get_params':
<artificial>:(.text.legacy_get_params+0xd4): undefined reference to `ossl_prov_is_running'
ld.bfd: <artificial>:(.text.legacy_get_params+0xd8): undefined reference to `ossl_prov_is_running'
ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o: in function `legacy_teardown':
<artificial>:(.text.legacy_teardown+0x4): undefined reference to `ossl_prov_ctx_get0_libctx'
ld.bfd: <artificial>:(.text.legacy_teardown+0x8): undefined reference to `ossl_prov_ctx_get0_libctx'
ld.bfd: <artificial>:(.text.legacy_teardown+0x34): undefined reference to `ossl_prov_ctx_free'
ld.bfd: <artificial>:(.text.legacy_teardown+0x38): undefined reference to `ossl_prov_ctx_free'
ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o: in function `OSSL_provider_init':
<artificial>:(.text.OSSL_provider_init+0x14): undefined reference to `ossl_prov_ctx_new'
ld.bfd: <artificial>:(.text.OSSL_provider_init+0x18): undefined reference to `ossl_prov_ctx_new'
ld.bfd: <artificial>:(.text.OSSL_provider_init+0x84): undefined reference to `ossl_prov_ctx_set0_libctx'
ld.bfd: <artificial>:(.text.OSSL_provider_init+0x88): undefined reference to `ossl_prov_ctx_set0_libctx'
ld.bfd: <artificial>:(.text.OSSL_provider_init+0x98): undefined reference to `ossl_prov_ctx_set0_handle'
ld.bfd: <artificial>:(.text.OSSL_provider_init+0x9c): undefined reference to `ossl_prov_ctx_set0_handle'
ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o:(.data.rel.ro.legacy_kdfs+0x10): undefined reference to `ossl_kdf_pbkdf1_functions'
ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o:(.data.rel.ro.legacy_ciphers+0x10): undefined reference to `ossl_cast5128ecb_functions'
ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o:(.data.rel.ro.legacy_ciphers+0x30): undefined reference to `ossl_cast5128cbc_functions'
[...]
ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o:(.data.rel.ro.legacy_digests+0x10): undefined reference to `ossl_md4_functions'
ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o:(.data.rel.ro.legacy_digests+0x30): undefined reference to `ossl_ripemd160_functions'
collect2: error: ld returned 1 exit status
Signed-off-by: Christophe Sokol <christophe@wk3.org>
(cherry picked from commit 906616d20183bb7be4eb71812ef5e76cb3af56a0)
|
|
|
|
|
|
|
|
| |
Package kernel module for Marvell 10G Ethernet PHYs found also in many
10G/1G/100M/10M RJ-45 SFP+ modules.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 2a5c7bf6213cc12d4ae6b7bce5d777b3518a89c1)
|
|
|
|
|
|
|
|
| |
Add patch to fix build failure caused by a missing header which had
previously been implicitely included.
Fixes: 6ddb5f5a65 ("uboot-mediatek: update to version 2023.07.02")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
|
|
|
|
|
| |
Among the patches adding support for MT7988 also came the switch to
use fdtdec_setup_mem_size_base() and no longer rely on CFG_SYS_SDRAM_BASE.
Take care of our downstream boards which did not have a 'memory' node in
their device trees.
Fixes: 572ea68070 ("uboot-mediatek: add patches for MT7988 and builds for RFB")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
|
|
| |
Import pending patches adding support for MT7988 and provide builds
for the reference board for all possible boot media.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
|
|
|
|
|
| |
Release 2023.07 got tagged wrongly and replaced by follow-up release
2023.07.02.
Now using upstream DTS for BPi-R3.
Removed two patches which made it upstream, refreshed the rest.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
|
|
|
|
|
| |
Instead of using the hash of the Github-generated tarball use the
hash of the tarball generated by the OpenWrt build system (in this
case they are different, unfortunately).
Reported-by: Chen Minqiang <ptpt52@gmail.com>
Fixes: 07dbeb430e ("arm-trusted-firmware-mediatek: update to sources of 2023-07-24")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
|
|
|
| |
Use updated Trusted Firmware-A sources from MediaTek, now stacked
on top of the ARM Trusted Firmware-A v2.9 release.
Add builds for the newly added MT7988 SoC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
147f52f3e feat(fiptool): add cca, core_swd, plat cert in FIP
0aaa382fe fix(sptool): fix concurrency issue for SP packages
cb666b39d Merge "fix(sptool): fix concurrency issue for SP packages" into integration
0be2475f6 fix: 'sp_mk_generator.py' reference to undef var
1a28f290b fix(sptool): operators "is/is not" in sp_mk_gen.py
cf2dd17dd refactor(security): add OpenSSL 1.x compatibility
4daeaf341 fix(sptool): add dependency to SP image
06e69f7c9 feat(fiptool): handle FIP in a disk partition
5a53c6c66 Merge "feat(fiptool): handle FIP in a disk partition" into integration
034a2e3ef refactor(fiptool): move plat_fiptool.mk to tools
0165ddd7c build(fiptool): add object dependency generation
c89fdb4a5 Merge "refactor(fiptool): move plat_fiptool.mk to tools" into integration
1b491eead fix(tree): correct some typos
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
|
|
|
|
| |
Because this device enable NMBM by default, most users use custom
U-Boot with NMBM-Enabled in Chinese forums.
This layout is the same as the ubootmod layout but enabling NMBM.
Signed-off-by: Hank Moretti <mchank9999@gmail.com>
|
|
|
|
|
|
| |
Add a custom uboot build to support openwrt uboot layout.
Signed-off-by: Hank Moretti <mchank9999@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since 2021.07 multiple bugs were introduced that made it impossible to
create a bootable target for mvebu. Those issues should be now fixed since
2023.07-rc1.
References: #11661
Signed-off-by: Oli Ze <olze@trustserv.de>
Reviewed-by: Robert Marko <robimarko@gmail.com>
Tested-by: Andre Heider <a.heider@gmail.com> # espressobin-v3-v5-1gb-2cs
Signed-off-by: Petr Štetiar <ynezz@true.cz> [facelift]
(cherry picked from commit ba7d6dddc7d20222c1703b173ef50befefb3fb52)
|
|
|
|
|
|
|
|
|
|
|
|
| |
8667347 build: allow passing SOVERSION value for dynamic library
Also adjust packaging of the library to only ship the SOVERSION
suffixed library object, to allow for concurrent installation of
ABI-incompible versions in the future.
Fixes: #13082
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 4af0a72a65d7c92ed4e7c2455090f695f424903d)
|
|
|
|
|
|
|
|
|
|
|
|
| |
At least Fedora and RHEL 9 set RSAMinSize=2048, so when trying to use
failsafe, we get 'Bad server host key: Invalid key length'
To workaround the issue, we can use: ssh -o RSAMinSize=1024 ...
Generating 2048 bits RSA is extremely slow, so add ed25519.
We keep RSA 1024 to be as compatible as possible.
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
(cherry picked from commit 6ac61dead99ff6b9df00c29b7a858772449718b2)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Changelog from quic:
Bug fixes, stability improvements from previous releases
are present. There are no backward comatibility issues
with this release.
Tested-by: Michał Kwiatek <michal@kwiatek.it> # Xiaomi AX3600
Signed-off-by: Michał Kwiatek <michal@kwiatek.it>
[ improve commit description ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 1c56801dd2e696cac7da45912b5e3ea1165549d5)
|