aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* fritz-tools: fix segfault in caldata-extractDavid Bauer2023-03-022-4/+6
| | | | | | | * Fix incorrect error message in case input file opening fails * Don't close files in case the pointers are invalid Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: add mesh fast-rx supportFelix Fietkau2023-03-021-0/+77
| | | | | | | This helps bring down rx CPU usage by avoiding calls to the rx handlers in the slow path. Supports forwarding and local rx, including A-MSDU. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* linux-firmware: add mt7986 offload firmwareFelix Fietkau2023-03-021-0/+10
| | | | | | | This is needed for WED support on MT7986. Enable it by default for the filogic subtarget. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2023-03-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | 71d84bfb343e wifi: mt76: mt76x0u: report firmware version through ethtool 99d13130b517 wifi: mt76: support ww power config in dts node 09c614734880 Revert "wifi: mt76: mt7996: rely on mt76_connac2_mac_decode_he_radiotap" e1c9c1cb50a8 mt76: mt7921: Let PCI core handle power state and use pm_sleep_ptr() 34064dbcd72a wifi: mt76: mt7921e: add pci .shutdown() support 18ccfa73a9e2 wifi: mt76: remove redundent MCU_UNI_CMD_* definitions 282845ce7f3d wifi: mt76: mt7921: fix wrong command to set STA channel 546934dacfd4 wifi: mt76: mt7921: fix PCI DMA hang after reboot fc2ed0dfc5b0 wifi: mt76: mt7996: Remove unneeded semicolon 1b602db9c235 wifi: mt76: mt7915: unlock on error in mt7915_thermal_temp_store() ce2438aa616a wifi: mt76: mt7996: fix radiotap bitfield 17ec2146b8f0 wifi: mt76: dynamic channel bandwidth changes in AP mode ab2d3650a456 wifi: mt76: mt7915: expose device tree match table 90d78253498e wifi: mt76: mt7915: add dev->hif2 support for mt7916 WED device a69c34a60451 wifi: mt76: mt7915: rework init flow in mt7915_thermal_init() 39079b5e44a7 wifi: mt76: drop the incorrect scatter and gather frame f9ca70d6367a wifi: mt76: mt7915: add back 160MHz channel width support for MT7915 eff7666e1aa4 wifi: mt76: handle failure of vzalloc in mt7615_coredump_work 920bc6e1fc8e wifi: mt76: do not run mt76_unregister_device() on unregistered hw b0721b96927b wifi: mt76: connac: refresh tx session timer for WED device c32d6d849c43 wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add patch for allowing the driver to refresh aggregation sessionsFelix Fietkau2023-03-021-0/+60
| | | | | | Required by a mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport upstream HE/VHT capability handling changesFelix Fietkau2023-03-022-0/+136
| | | | | | Will be required by an mt76 update at some point Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: sync mesh fast xmit patch with upstream requested changesFelix Fietkau2023-03-021-19/+13
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix hwmon-gsc driverTim Harvey2023-03-014-337/+19
| | | | | | | | | Fix hwmon-gsc driver by replacing out-of-tree hwmon-gsc driver with in-tree driver that was merged in Linux v5.8: - remove the old out-of-tree module - add configuration for the in-tree modules Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* kexec-tools: update to 2.0.26Nick Hainke2023-03-012-55/+3
| | | | | | | | | | | | | | | Release Notes: - 2.0.22: https://www.spinics.net/lists/kexec/msg26864.html - 2.0.23: https://www.spinics.net/lists/kexec/msg27693.html - 2.0.24: https://www.spinics.net/lists/kexec/msg28922.html - 2.0.25: https://lore.kernel.org/all/YuYl22cyGldQQc5m@vergenet.net/ - 2.0.26: https://www.spinics.net/lists/kexec/msg30743.html Remove upstreamed patch: - 001-arm-do-not-copy-magic-4-bytes-of-appended-DTB-in-zIm.patch Tested-by: Linhui Liu <liulinhui36@gmail.com> # x86_64 Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: add tty led trigger kernel module packageFlorian Eckert2023-03-011-0/+17
| | | | | | | This allows LEDs to be controlled by activity on ttys which includes serial devices like '/dev/ttyS0'. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* fstools: update to the latest masterRafał Miłecki2023-02-281-3/+3
| | | | | | bfe882d libblkid-tiny: add exfat superblock support Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: fix mesh path discovery based on unicast packetsFelix Fietkau2023-02-261-0/+52
| | | | | | | | | If a packet has reached its intended destination, it was bumped to the code that accepts it, without first checking if a mesh_path needs to be created based on the discovered source. Fix this by moving the destination address check further down Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: rework mesh fast xmit implementationFelix Fietkau2023-02-264-431/+506
| | | | | | | Refactor in order to make use of generic fast xmit functions Fix issues with mesh SA/DA addressing Signed-off-by: Felix Fietkau <nbd@nbd.name>
* grub2: re-add test moduleTomasz Maciej Nowak2023-02-261-3/+3
| | | | | | | | | | | | | | | | | | | | | | | It seems more hardware needs early load of firmware when initialised to work properly (at least Intel hardware). One of previous case is CPU microcode, which this series[1] tried to change. The second one is Intel graphics IC, which needs firmware for controlling DMC circuit (switch conncted display to DC6 power state). As it stands, the i915 module is built-in and it seems the hardware can't cope with firmware loaded later from rootfs, it needs to be supplied when the module is loaded. Unfortunately we need bootloader to handle the load of firmware in this case, but as previously mentioned series[1], there was an error when initrd was hardcoded, instead of testing existence for it and then loading. To remedy this in later the 55b808e0c4be ('x86: image: add test module to bootloader') was commited. Which was later accidentally dropped when grub2 image creation was moved to packages. Therefore bring back test module, so we can test for cases of existing firmware in grub.cfg. 1. https://patchwork.ozlabs.org/project/openwrt/cover/20181120162044.16371-1-tomek_n@o2.pl Fixes: 5a5df62d95f5 ("x86/grub2: move grub2 image creation to package") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* mvebu: add support for Buffalo LinkStation LS220DEDaniel González Cabanelas2023-02-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Buffalo LinkStation LS220DE is a dual bay NAS, based on Marvell Armada 370 Hardware: SoC: Marvell Armada 88F6707 CPU: Cortex-A9 800 MHz, 1 core Flash 1: SPI-NOR 1 MiB (U-Boot) Flash 2: NAND 512 MiB (OS) RAM: DDR3 256 MiB Ethernet: 1x 1GbE USB: 1x 2.0 SATA: 2x 3Gb/s LEDs/Input: 5x / 2x (1x button, 1x slide-switch) Fan: 1x casing Flash instructions, from hard drive: 1. Get access to the "boot" partition at the hard drive where the stock firmware is installed. It can be done with acp-commander or by plugging the hard drive to a computer. 2. Backup the stock uImage: mv /boot/uImage.buffalo /boot/uImage.buffalo.bak 3. Move and rename the Openwrt initramfs image to the boot partition: mv openwrt-initramfs-kernel.bin /boot/uImage.buffalo 4. Power on the Linkstation with the hardrive inside. Now Openwrt will boot, but still not installed. 5. Connect via ssh to OpenWrt: ssh root@192.168.1.1 6. Rename boot files inside boot partition mount -t ext3 /dev/sda1 /mnt mv /mnt/uImage.buffalo /mnt/uImage.buffalo.openwrt.bak mv /mnt/initrd.buffalo /mnt/initrd.buffalo.bak 7. Format ubi partitions at the NAND flash ("kernel_ubi" and "ubi"): ubiformat /dev/mtd0 -y ubidetach -p /dev/mtd1 ubiformat /dev/mtd1 -y 8. Flash the sysupgrade image: sysupgrade -n openwrt-squashfs-sysupgrade.bin 9. Wait until it finish, the device will reboot with OpenWrt installed on the NAND flash. Restore the stock firmware: 1. Take the hard drive used for the installation and restore boot backup files to their original names: mount -t ext3 /dev/sda1 /mnt mv /mnt/uImage.buffalo.bak /mnt/uImage.buffalo mv /mnt/initrd.buffalo.bak /mnt/initrd.buffalo 2. Boot from the hard drive and perform a stock firmware update using the Buffalo utility. The NAND will be restored to the original state. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* mac80211: fix mesh fast xmit header cache flushFelix Fietkau2023-02-261-71/+159
| | | | | | split into multiple functions depending on sta, mpath or mpp Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ncurses: add alacritty terminfoTobias Hilbig2023-02-261-1/+2
| | | | | | | | Add terminfo file for the terminal emulator alacritty. https://github.com/alacritty/alacritty Signed-off-by: Tobias Hilbig <web.tobias@hilbig-ffb.de>
* dnsmasq: bump to v2.89Kevin Darbyshire-Bryant2023-02-253-5/+5
| | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* netifd: update to the latest versionHauke Mehrtens2023-02-251-4/+4
| | | | | | | | | | ed65a00 netifd: bridge: Fix format string position 19372d8 netifd: Fix multiple -Wsign-compare warnings 8ebf033 netifd: Do not return values in void function c77417a netifd: Explicitly zero initialize variables 463a120 netifd: Activate -Wextra compile warnings Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ustream-ssl: update to Git version 2023-02-25Hauke Mehrtens2023-02-251-4/+4
| | | | | | 498f6e2 ustream-mbedtls: Use getrandom() instead of /dev/urandom Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* iproute2: update to 6.2Nick Hainke2023-02-2516-69/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Release Notes: https://lwn.net/Articles/923952/ Refresh patches: - 110-darwin_fixes.patch - 115-add-config-xtlibdir.patch - 140-allow_pfifo_fast.patch - 140-keep_libmnl_optional.patch - 145-keep_libelf_optional.patch - 150-keep_libcap_optional.patch - 155-keep_tirpc_optional.patch - 170-ip_tiny.patch - 175-reduce-dynamic-syms.patch - 180-drop_FAILED_POLICY.patch - 190-fix-nls-rpath-link.patch - 195-build_variant_ip_tc.patch - 200-drop_libbsd_dependency.patch - 300-selinux-configurable.patch Remove upstreamed: - 320-configure-Remove-include-sys-stat.h.patch While working on it remove AUTORELEASE. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ethtool: update to 6.2Nick Hainke2023-02-254-555/+2
| | | | | | | | | | | | | | | | | | Release notes: - Feature: link down event statistics (no option) - Feature: JSON output for coalesce (-c) - Feature: new link modes (no option) - Feature: JSON output for ring (-g) - Feature: netlink handler for RSS get (-x) - Fix: fix boolean value output in JSON output - Fix: fix build errors and warnings Remove upstreamed patches: - 100-uapi-Bring-in-if-h.patch - 101-netlink-Fix-maybe-uninitialized-meters-variable.patch - 102-raw-marvell-c-Fix-build-with-musl-libc.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* libcap: update to 2.67Nick Hainke2023-02-251-3/+3
| | | | | | | | | | Release notes: https://sites.google.com/site/fullycapable/release-notes-for-libcap#h.o8papfkfh1x9 While working on it, remove $(AUTORELEASE). Tested-by: Linhui Liu liulinhui36@gmail.com # Xiaomi AX3600 Signed-off-by: Nick Hainke <vincent@systemli.org>
* base-files: add support for retrieving IPv6 assignmentsMark Baker2023-02-241-0/+14
| | | | | | | In DHCPv6-PD enabled environments, addresses are assigned to interfaces. These new functions retrieve the IPv6 assigned prefix(es). Signed-off-by: Mark Baker <mark@vpost.net>
* mac80211: ath11k: sync with ath-nextRobert Marko2023-02-2220-4/+1616
| | | | | | | | | | | | Synchronize the ath11k backports with the current ath-next tree. This backports several memory leak issues, PCI IRQ fixup, peer add locking fix as well as IPQ5018 support, though IPQ5018 support is unused for now. This allows to easily backport further fixes as cherry picking them has started requiring manual conflict resolution. Signed-off-by: Robert Marko <robimarko@gmail.com>
* openssl: fix powerpc & arc libatomic dependenciesEneas U de Queiroz2023-02-222-3/+3
| | | | | | | | | | | PowerPC CONFIG_ARCH is defined as powerpc, not ppc. Fix that in the DEPENDS condition. Arc needs to be built with libatomic. Change the OpenSSL configuration file, and add it to the libatomic DEPENDS condition. Fixes: 7e7e76afca "openssl: bump to 3.0.8" Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* openssl: bump to 3.0.8Eneas U de Queiroz2023-02-2015-3833/+85
| | | | | | | | | | This is a major update to the current LTS version, supported until 2026-09-07. Changelog: https://github.com/openssl/openssl/blob/openssl-3.0.8/CHANGES.md Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* mac80211: fix mesh issues and improve performanceFelix Fietkau2023-02-206-1/+939
| | | | | | | fix forwarding received mesh a-msdu packets add fast xmit support for mesh to improve performance Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: always use sae_password for mesh/SAE authLeon M. Busch-George2023-02-191-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a corner case when using passwords that are exactly 64 characters in length with mesh mode or passwords longer than 63 characters with SAE because 'psk' is used instead of 'sae_password'. SAE is obligatory for 802.11s (mesh point). The 'psk' option for hostapd is suited for WPA2 and enforces length restrictions on passwords. Values of 64 characters are treated as PMKs. With SAE, PMKs are always generated during the handshake and there are no length restrictions. The 'sae_password' option is more suited for SAE and should be used instead. Before this patch, the 'sae_password' option is only used with mesh mode passwords that are not 64 characters long. As a consequence: - mesh passwords can't be 64 characters in length - SAE only works with passwords with lengths >8 and <=63 (due to psk limitation). Fix this by always using 'sae_password' with SAE/mesh and applying the PMK differentiation only when PSK is used. Fixes: #11324 Signed-off-by: Leon M. Busch-George <leon@georgemail.eu> [ improve commit description ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* hostapd: add quotes in assignmentsLeon M. Busch-George2023-02-191-6/+6
| | | | | | It's generally advised to use quotes for variable assignments in bash. Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
* base-files: sysfixtime: Fix time on the fake RTCYuan Tao2023-02-191-6/+16
| | | | | | | | | | | | | | | On some devices the chip has RTC but no battery save time. This leads back to getting the wrong time and skipping the check of the last file modification date. This commit ensures that the file time is checked even if the RTC exists. which would ordinarily return an approbiate system time used for e.g. certificate generation. Tested-on: NanoPi R2S Signed-off-by: Yuan Tao <ty@wevs.org>
* wireguard-tools: remove unnecessary .mk includesAndre Heider2023-02-181-2/+0
| | | | | | | | | Including kernel.mk moves the package build folder in the linux one, which is confusing since this isn't building any kernel modules. package-defaults.mk is already included my package.mk. Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: kmod-ramoops: Include pstore console supportBrian Norris2023-02-181-1/+2
| | | | | | | | | | | | | | | | | Pstore ramoops support is useful even when there isn't an explicit panic/crash. We can log all kernel messages via a "console", and then retrieve them in the event of some non-kernel-panic reset (e.g., watchdog). Since the buffer memory is already reserved, there isn't much overhead to doing this. The new console files will show up as: /sys/fs/pstore/console-ramoops-N Cc: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* elfutils: fix build with GCC 11Andre Heider2023-02-181-1/+9
| | | | | | | | GCC 11 doesn't know about -Wno-error=use-after-free and aborts compilation. Fixes: 2748c45d "elfutils: Ignore wrong use-after-free error" Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: can: fix MCP251x CAN controller module autoloadTim Harvey2023-02-181-1/+1
| | | | | | Fix autoload module name for can-mcp251x kmod. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* netfilter: add kmod-nf-conntrackAviana Cruz2023-02-181-0/+23
| | | | | | | | | There have been some demands for the `ct count` expression, like https://forum.openwrt.org/t/22-03-2-unable-to-use-ct-count-nft-rules/146680. This adds the required kernel modules for the expression to work. Signed-off-by: Aviana Cruz <gwencroft@proton.me>
* ramips: add support for Senao Engenius EPG600Michael Pratt2023-02-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FCC ID: A8J-EPG600 Engenius EPG600 is an indoor wireless router with 1 Gb ethernet switch, dual-band wireless, internal antenna plates, USB, and phone lines (not supported) this board is a Senao device: the hardware is equivalent to EnGenius ESR600 (except for phone lines) the software is Senao SDK which is based on openwrt and uboot which uses the legacy Senao header with Vendor / Product IDs to verify the firmware upgrade image. **Specification:** - MT7620 SOC MIPS 24kec, 2.4 GHz WMAC, 2x2 - RT5592N WLAN PCI chip, 5 GHz, 2x2 - QCA8337N Gb SW RGMII GbE, SW P0 -- SOC P5, 5 LEDs - 40 MHz clock - 16 MB FLASH MX25L12845EMI-10G - 64 MB RAM NT5TU32M16 - UART console J2, populated - USB 2.0 port direct to SOC - 6 GPIO LEDs power, 2G, 5G, wps2g, wps5g, line - 3 buttons reset, wps, "reg" (registeration) - 4 antennas internal omni-directional plates NOT YET SUPPORTED: VoIP - Si3050-FT + Si3019-FT Voice DAA, SPI control, PCM data - Phone Ports "TEL", "LINE" RJ11, 4P2C (2 pins) **MAC addresses:** MAC address labeled as MAC ADDRESS MACs present in both wifi cal data and uboot environment eth0.1/phy1 ---- *:82 rf 0x4 phy0 ---- *:83 factory 0x4 eth0.2 MAC *:b8 "wanaddr" **Installation:** Method 1: Firmware upgrade page: (if you cannot access the APs webpage) factory reset with the reset button connect ethernet to a computer OEM webpage at 192.168.0.1 username and password 'admin' Navigate to gear icon, "Device Management", "Tools" select the factory.dlf image Upload and verify checksum Method 2: Serial to upload initramfs: Follow directions for TFTP recovery upload and boot initramfs and do a sysupgrade **TFTP recovery:** Requires UART serial console, reset button does nothing rename initramfs-kernel.bin to 'uImageEPG600' make available on TFTP server at 192.168.99.8 power board, interrupt boot with "4" execute `tftpboot` and `bootm` (with the load address) **Return to OEM:** Images from OEM are provided, but not compatible with openwrt sysupgrade. So it must be modified. Alternatively, back up all mtd partitions before flashing **Note on switch registers:** The necessary registers needed for the QCA8337 switch can be read from interrupted boot (tftpboot, bootm) by using the following lines in the switch driver ar8327.c in the function 'ar8327_hw_config_of' where 'qca,ar8327-initvals' is parsed from DTS before the new register values are written: pr_info("0x04 %08x\n", ar8xxx_read(priv, AR8327_REG_PAD0_MODE)); pr_info("0x08 %08x\n", ar8xxx_read(priv, AR8327_REG_PAD5_MODE)); pr_info("0x0c %08x\n", ar8xxx_read(priv, AR8327_REG_PAD6_MODE)); pr_info("0x10 %08x\n", ar8xxx_read(priv, AR8327_REG_POWER_ON_STRAP)); Signed-off-by: Michael Pratt <mcpratt@pm.me>
* wireless-regdb: update to 2023.02.13Yuu Toriyama2023-02-181-2/+2
| | | | | | | | | | | | Changes: 7f7a9f7 wireless-regdb: update regulatory database based on preceding changes 660a1ae wireless-regdb: Update regulatory info for Russia (RU) on 5GHz fe05cc9 wireless-regdb: Update regulatory rules for Japan (JP) on 6GHz d8584dc wireless-regdb: Update regulatory rules for Japan (JP) on 5GHz c04fd9b wireless-regdb: update regulatory rules for Switzerland (CH) f29772a wireless-regdb: Update regulatory rules for Brazil (BR) Signed-off-by: Yuu Toriyama <PascalCoffeeLake@gmail.com>
* odhcpd: bump to git HEADStijn Tintel2023-02-171-3/+3
| | | | | | | | dfab0fa dhcpv4: detect noarp interfaces 5a17751 router: improve RA logging edc5e17 router: always check ra_default Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* build: add option to use preinit IP as LAN IPStijn Tintel2023-02-172-0/+20
| | | | | | | | | | | We currently have build options to customize the IP address used in the preinit phase of the boot process, but not to set the default LAN IP. Introduce a boolean build option that, when enabled, results in the IP address configured for the preinit phase, to be also used as the default LAN IP address. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: modules: package Aquantia PHY driverRobert Marko2023-02-151-0/+16
| | | | | | | | | | | | | Package the Aquantia AQR PHY driver as kmod. This enables using the Aquantia driver with hwmon support on targets where hwmon is not compiled-in. Currently, in case when AQR driver is compiled-in but hwmon core is not hwmon code in AQR driver will not get compiled because of macro IS_REACHABLE(CONFIG_HWMON) evaluating to false. Signed-off-by: Robert Marko <robimarko@gmail.com>
* iptables: iptables-mod-conntrack-extra: don't select kmod-ipt-rawRafał Miłecki2023-02-151-1/+1
| | | | | | | | | | | | | | | | | | | | | Package kmod-ipt-raw enables CONFIG_IP_NF_RAW and packages iptable_raw.ko According to kernel's net/netfilter/Kconfig there are only 3 kernel symbols that depend on the IP_NF_RAW: 1. NETFILTER_XT_TARGET_CT (xt_CT.ko) 2. NETFILTER_XT_TARGET_NOTRACK (unused symbol?!) 3. NETFILTER_XT_TARGET_TRACE (xt_TRACE.ko) Now: iptables-mod-conntrack-extra selects kmod-ipt-conntrack-extra which provides: xt_helper.ko nf_conncount.ko xt_connlimit.ko xt_connmark.ko xt_recent.ko and xt_connbytes.ko (none of them seems to require iptable_raw.ko). It seems there is no explicit reason for iptables-mod-conntrack-extra to require kmod-ipt-raw (iptables_raw.ko). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* netifd: refactor packet steering initRafał Miłecki2023-02-153-3/+24
| | | | | | | | 1. Move setup code to independent script file 2. Add init.d script to allow automatic updates 3. Support platform specific /usr/libexec/platform/packet-steering.sh Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* treewide: replace /sys/devices/virtual/ubi by /sys/class/ubiDaniel Golle2023-02-151-5/+4
| | | | | | | | | | Starting from Linux Kernel version 6.3 UBI devices will no longer be considered virtual, but rather have an MTD device parent. Hence they will no longer be listed under /sys/devices/virtual/ubi which is used in multiple places in OpenWrt. Prepare for future kernels by using /sys/class/ubi instead of /sys/devuces/virtual/ubi. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* fstools: update to git HEADDaniel Golle2023-02-151-3/+3
| | | | | | 12155d3 libfstools: use class interface to iterate over ubi devices Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ucode: update to the latest versionFelix Fietkau2023-02-141-4/+4
| | | | | | | | | | | | | | 08c709c58187 rtnl: add support for registering an uloop based listener 599a7fb59380 Merge pull request #140 from nbd168/rtnl c4125c516e0a nl80211: fix NL80211_ATTR_SURVEY_INFO c43bb9d8fe8d Merge pull request #141 from dhewg/master c1342d934b2d nl80211: add missing ucv_get() calls 9022b270683a rtnl: add missing ucv_get() calls 837cffec5a5c Merge pull request #142 from nbd168/ref-fixes 65b1f181e642 rtnl: add missing uc_vm_registry_set call ab2f3f70257d Merge pull request #143 from nbd168/rtnl-fix Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq807x: add support for Buffalo WXR-5950AX12INAGAKI Hiroshi2023-02-122-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buffalo WXR-5950AX12 is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on IPQ8074A. Specification: - SoC : Qualcomm IPQ8074A - RAM : DDR3 1024 MiB (2x Nanya NT5CC256M16ER-EK) - Flash : RAW NAND 256 MiB (Winbond W29N02GZBIBA) - WLAN : 2.4/5 GHz (IPQ8074A) - Ethernet : 5 ports - WAN : 100/1000/2500/10000 Mbps x1 (AQR113C) - LAN : 100/1000/2500/10000 Mbps x1 (AQR113C), 10/100/1000 Mbps x3 (QCA8075) - LED/Keys : 8x/5x - UART : pin header on PCB (J7) - assignment: 3.3V, GND, TX, RX from disc marking - settings : 115200n8 - Power : 12 VDC, 4 A Flash instruction using initramfs image: 1. Prepare TFTP server with IP address 192.168.11.10 2. Rename OpenWrt initramfs image to "WXR-5950AX12-initramfs.uImage and place it to TFTP directory 3. Hold AOSS (WPS) button and power on WXR-5950AX12 4. WXR-5950AX12 downloads initramfs image from TFTP server and boots with it automatically 5. Upload sysupgrade image to WXR-5950AX12 and perform sysupgrade 6. Wait ~120 seconds to complete flashing Partition layout: 0x000000000000-0x000000100000 : "0:sbl1" 0x000000100000-0x000000200000 : "0:mibib" 0x000000200000-0x000000280000 : "0:bootconfig" 0x000000280000-0x000000300000 : "0:bootconfig1" 0x000000300000-0x000000600000 : "0:qsee" 0x000000600000-0x000000900000 : "0:qsee_1" 0x000000900000-0x000000980000 : "0:devcfg" 0x000000980000-0x000000a00000 : "0:devcfg_1" 0x000000a00000-0x000000a80000 : "0:apdp" 0x000000a80000-0x000000b00000 : "0:apdp_1" 0x000000b00000-0x000000b80000 : "0:rpm" 0x000000b80000-0x000000c00000 : "0:rpm_1" 0x000000c00000-0x000000c80000 : "0:cdt" 0x000000c80000-0x000000d00000 : "0:cdt_1" 0x000000d00000-0x000000d80000 : "0:appsblenv" 0x000000d80000-0x000000e80000 : "0:appsbl" 0x000000e80000-0x000000f80000 : "0:appsbl_1" 0x000000f80000-0x000001000000 : "0:art" 0x000001000000-0x000001080000 : "0:art_1" 0x000001080000-0x000001100000 : "0:orgdata" 0x000001100000-0x000001180000 : "0:orgdata_1" 0x000001180000-0x000005180000 : "rootfs" 0x000005180000-0x000009180000 : "rootfs_recover" 0x000009180000-0x000010000000 : "user_property" Notes: - WXR-5950AX12 has 2x OS images on NAND flash. The 1st image is for normal operation and the 2nd one is for recoverying or firmware upgrading on stock. - Stock U-Boot checks MD5 hashes in "fw_hash" volume in each "root*" partition when booting. This is just a comparation of hash strings. Behaviors: - both "fw_hash" volumes exist, hashes are rootfs == rootfs_recover ---> boot from rootfs - both "fw_hash" volumes exist, hashes are rootfs != rootfs_recover ---> boot from rootfs_recover Note: this behavior is used for firmware upgrading on stock - "fw_hash" volume in rootfs is missing ---> boot from rootfs_recover - "fw_hash" volume in rootfs_recover is missing ---> boot from rootfs - "fw_hash" volumes in both root* partition are missing ---> boot from rootfs_recover Reverting to stock firmware: 1. Decrypt official image by buffalo-enc and remove header example of decryption: $ buffalo-enc -i wxr_5950ax12_jp_305 -o wxr_5950ax12_jp_305.dec \ -d -k olaffuB -O 0xc8 example of removing header (v3.05): - before $ hexdump -n 64 -v -C wxr_5950ax12_jp_305.dec 00000000 57 58 52 2d 35 39 35 30 41 58 31 32 5f 33 2e 30 |WXR-5950AX12_3.0| 00000010 35 5f 31 2e 30 31 5f 4a 50 5f 6a 70 5f 71 63 61 |5_1.01_JP_jp_qca| 00000020 0a 66 69 6c 65 6c 65 6e 3d 34 35 33 35 30 39 31 |.filelen=4535091| 00000030 32 0a 55 42 49 23 01 00 00 00 00 00 00 00 00 00 |2.UBI#..........| 00000040 - after $ hexdump -n 64 -v -C wxr_5950ax12_jp_305.ubi 00000000 55 42 49 23 01 00 00 00 00 00 00 00 00 00 00 00 |UBI#............| 00000010 00 00 08 00 00 00 10 00 78 cf c4 91 00 00 00 00 |........x.......| 00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000030 00 00 00 00 00 00 00 00 00 00 00 00 3d 2a 64 fd |............=*d.| 00000040 2. Boot WXR-5950AX12 with OpenWrt initramfs image 3. Upload modified stock image to WXR-5950AX12 4. Find partitions "rootfs" and "rootfs_recover" example: root@OpenWrt:/# cat /proc/mtd dev: size erasesize name ... mtd22: 04000000 00020000 "rootfs" mtd23: 04000000 00020000 "rootfs_recover" ... in this case, "rootfs" is mtd22 and "rootfs_recover" is mtd23 5. Format "rootfs"/"rootfs_recover" partition with the uploaded image example: ubiformat /dev/mtd22 -f /tmp/wxr_5950ax12_jp_305.ubi ubiformat /dev/mtd23 -f /tmp/wxr_5950ax12_jp_305.ubi 6. Remove "rootfs"/"rootfs_data" volume from user_property partition example: . /lib/upgrade/nand.sh UBI=$(nand_attach_ubi user_property) ubirmvol /dev/$UBI -N rootfs ubirmvol /dev/$UBI -N rootfs_data 7. Reboot MAC addresses: LAN : 50:C4:DD:xx:xx:28 (0:APPSBLENV, ethaddr (text)) WAN : 50:C4:DD:xx:xx:28 (0:APPSBLENV, ethaddr (text)) 2.4 GHz: 50:C4:DD:xx:xx:30 (0:APPSBLENV, wlan0addr (text)) 5 GHz : 50:C4:DD:xx:xx:38 (0:APPSBLENV, wlan1addr (text)) Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* uboot-envtools: add support for APRESIA ApresiaLightGS120GT-SSINAGAKI Hiroshi2023-02-131-0/+8
| | | | | | | This patch adds support for APRESIA ApresiaLightGS120GT-SS to uboot-envtools. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mac80211: add fixes for receiving A-MSDU packets on mesh interfacesFelix Fietkau2023-02-138-34/+1141
| | | | | | | | The standard defines the A-MSDU header length field differently for mesh compared to other modes. Deal with this accordingly and work around broken implementations (e.g. ath10k, ath11k). Signed-off-by: Felix Fietkau <nbd@nbd.name>
* e2fsprogs: update to 1.47.0Nick Hainke2023-02-131-2/+2
| | | | | | | Release notes: https://e2fsprogs.sourceforge.net/e2fsprogs-release.html#1.47.0 Signed-off-by: Nick Hainke <vincent@systemli.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 15:29:49 +0000