aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* linux-firmware: update to 20230310Nick Hainke2023-03-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: 588dd07 qat: update licence text a03713d rtl_bt: Update RTL8822C BT USB firmware to 0x0CC6_D2E3 63dac62 rtl_bt: Update RTL8822C BT UART firmware to 0x05C6_D2E3 5adebcf WHENCE: remove duplicate File entries d32de23 WHENCE: remove trailing white space 24c9df9 linux-firmware: add fw for qat_4xxx b568bbc Fix symlinks for Intel firmware f49c572 linux-firmware: update firmware for mediatek bluetooth chip (MT7921) db6e357 linux-firmware: update firmware for MT7921 WiFi device 4309412 iwlwifi: update core69 and core72 firmwares for Ty device 4cc3eda rtlwifi: Add firmware v16.0 for RTL8710BU aka RTL8188GU 76ad275 brcm: Add nvram for the Lenovo Yoga Book X90F / X90L convertible 1bc8afb brcm: Fix Xiaomi Inc Mipad2 nvram/.txt file macaddr d02d58a brcm: Add nvram for the Advantech MICA-071 tablet c51488f rtl_bt: Update RTL8852C BT USB firmware to 0xD7B8_FABF 3653d69 rtl_bt: Add firmware and config files for RTL8821CS 7375bcf rtw89: 8852b: update fw to v0.29.29.0 5148670 rtw89: 8852b: update fw to v0.29.26.0 c600840 liquidio: remove lio_23xx_vsw.bin 23afbfe intel: avs: Add AudioDSP base firmware for CNL-based platforms 284e55d intel: avs: Add AudioDSP base firmware for APL-based platforms 289e3a9 intel: avs: Add AudioDSP base firmware for SKL-based platforms c7a57ef ath11k: WCN6855 hw2.0: update to WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 6a4e7f6 ath11k: WCN6855 hw2.0: update board-2.bin 0e2486b ath11k: WCN6750 hw1.0: update board-2.bin f48fbe4 ath11k: IPQ5018 hw1.0: add to WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 9dacec6 ath11k: IPQ5018 hw1.0: add board-2.bin 15054af ath10k: QCA6174 hw3.0: update firmware-sdio-6.bin to version WLAN.RMH.4.4.1-00174 024cc5e ath10k: WCN3990 hw1.0: update board-2.bin a253a37 cnm: update chips&media wave521c firmware. c0a0bc2 amdgpu: Update GC 11.0.1 firmware 4296b7a intel: catpt: Add AudioDSP base firmware for BDW platforms f79e4ba linux-firmware: Update AMD cpu microcode 1fd4c55 brcm: revert firmware files for Cypress devices 5aa0b27 brcm: restore previous firmware file for BCM4329 device c3f3baa rtw88: 8822c: Update normal firmware to v9.9.14 c1181ae i915: Add DMC v2.11 for MTL 2fd61bc linux-firmware: Add firmware for Cirrus CS35L41 on UM3402 ASUS Laptop a60d908 linux-firmware: Add missing tuning files for HP Laptops using Cirrus Amps a5046f4 i915: Add DMC v2.18 for ADLP 5c11a37 amdgpu: Add VCN 4.0.2 firmware 5fe2d73 amdgpu: Add PSP 13.0.4 firmware a3332f8 amdgpu: Add SDMA 6.0.1 fimware 4535de6 amdgpu: Add GC 11.0.1 firmware 2e93e4c amdgpu: Add DCN 3.1.4 firmware 3435843 iwlwifi: remove old intermediate 5.15+ firmwares 494389c iwlwifi: remove 5.10 and 5.15 intermediate old firmwares 177c593 iwlwifi: remove 5.4 and 5.10 intermediate old firmwares fa3a6d5 iwlwifi: remove 4.19 and 5.4 intermediate old firmwares d11eb6f iwlwifi: remove old unsupported older than 4.14 LTS bb2d42d linux-firmware: update firmware for MT7921 WiFi device 3f0f338 linux-firmware: update firmware for mediatek bluetooth chip (MT7921) f88f1f8 amdgpu: update vangogh firmware Signed-off-by: Nick Hainke <vincent@systemli.org>
* ipq807x: add support for Netgear WAX218Alexandru Gagniuc2023-03-202-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netgear WAX218 is a 802.11ax AP claiming AX3600 support. It is wall or ceiling mountable. It can be powered via PoE, or a 12 V adapter. The board has footprints for 2.54mm UART headers. They're difficult to solder because the GND is connected to a large copper plane. Only try soldering if you are very skilled. Otherwise, use pogo pins. Specifications: --------------- * CPU: Qualcomm IPQ8072A Quad core Cortex-A53 2.2GHz * RAM: 366 MB of RAM available to OS, not sure of total amount * Storage: Macronix MX30UF2G18AC 256MB NAND * Ethernet: * 2.5G RJ45 port (QCA8081) with PoE input * WLAN: * 2.4GHz/5GHz with 8 antennas * LEDs: * Power (Amber) * LAN (Blue) * 2G WLAN (Blue) * 5G WLAN (Blue) * Buttons: * 1x Factory reset * Power: 12V DC Jack * UART: Two 4-pin unpopulated headers near the LEDs * "J2 UART" is the CPU UART, 3.3 V level Installation: ============= Web UI method ------------- Flashing OpenWRT using the vendor's Web UI is problematic on this device. The u-boot mechanism for communicating the active rootfs is antiquated and unreliable. Instead of setting the kernel commandline, it relies on patching the DTS partitions of the nand node. The way partitions are patched is incompatible with newer kernels. Newer kernels use the SMEM partition table, which puts "rootfs" on mtd12. The vendor's Web UI will flash to either mtd12 or mtd14. One reliable way to boot from mtd14 and avoid boot loops is to use an initramfs image. 1. In the factory web UI, navigate to System Manager -> Firmware. 2. In the "Local Firmware Upgrade" section, click Browse 3. Navigate and select the 'web-ui-factory.fit' image 4. Click "Upload" 5. On the following page, click on "Proceed" The flash proceeds at this point and the system will reboot automatically to OpenWRT. 6. Flash the 'nand-sysupgrade.bin' using Luci or the commandline SSH method ---------- Enable SSH using the CLI or Web UI. The root account is locked out to ssh, and the admin account defaults to Netgear's CLI application. So we need to get creative: First, make sure the device boots from the second firmware partition: ssh -okexalgorithms=diffie-hellman-group14-sha1 admin@<ipaddr> \ /usr/sbin/fw_setenv active_fw 1 Then reboot the device, and run the update: scp -O -o kexalgorithms=diffie-hellman-group14-sha1 \ -o hostkeyalgorithms=ssh-rsa \ netgear_wax218-squashfs-nand-factory.ubi \ admin@<ipaddr>:/tmp/openwrt.ubi ssh -okexalgorithms=diffie-hellman-group14-sha1 admin@<ipaddr> \ /usr/sbin/ubiformat /dev/mtd12 -f /tmp/openwrt.ubi ssh -okexalgorithms=diffie-hellman-group14-sha1 admin@<ipaddr> \ /usr/sbin/fw_setenv active_fw 0 Now reboot the device, and it should boot into a ready-to-use OpenWRT. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Francisco G Luna <frangonlun@gmail.com>
* mac80211: ath11k: sync with ath-nextRobert Marko2023-03-2011-0/+2637
| | | | | | | | | | | | Synchronize the ath11k backports with the current ath-next tree. This brings in actually setting the MU-MIMO parameters in HW and 6GHz regulatory support along with some minor resource handling fixes. This allows to easily backport further fixes as cherry picking them has started requiring manual conflict resolution. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: mark patches accepted upstreamNick Hainke2023-03-1915-0/+0
| | | | | | Add kernel tags to the patches that got accepted upstream. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ipq-wifi: bump to latest git HEADKristjan Krušič2023-03-191-3/+3
| | | | | | | 31ff96d ipq806x: add support for Nokia Airscale AC400i 1af1df2 ath11k: ipq8074: add Netgear WAX218 Signed-off-by: Kristjan Krušič <kristjan.krusic@krusic22.com>
* ipq806x: add support for Nokia Airscale AC400iKristjan Krušič2023-03-192-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Qualcomm IPQ8065 RAM: 512 MB DDR3 Flash: 256 MB NAND (Macronix MX30UF2G18AC) (split into 2x128MB) 4 MB SPI-NOR (Macronix MX25U3235F) WLAN: Qualcomm Atheros QCA9984 - 2.4Ghz Qualcomm Atheros QCA9984 - 5Ghz ETH: eth0 - POE (100Mbps in U-Boot, 1000Mbps in OpenWrt) eth1 - (1000Mbps in both) Auto-negotiation broken on both. USB: USB 2.0 LED: 5G, 2.4G, ETH1, ETH2, CTRL, PWR (All support green and red) BTN: Reset Other: SD card slot (non-functional) Serial: 115200bps, near the Ethernet transformers, labeled 9X. Connections from the arrow to the 9X text: [NC] - [TXD] - [GND] - [RXD] - [NC] Installation ------------ 0. Connect to the device Plug your computer into LAN2 (1000Mbps connection required). If you use the LAN1/POE port, set your computer to force a 100Mbps link. Connect to the device via TTL (Serial) 115200n8. Locate the header (or solder pads) labeled 9X, near the Ethernet jacks/transformers. There should be an arrow on the other side of the header marking. The connections should go like this: (from the arrow to the 9X text): NC - TXD - GND - RXD - NC 1. Prepare for installation While the AP is powering up, interrupt the startup process. MAKE SURE TO CHECK YOUR CURRENT PARTITION! If you see: "Current Partition is : partB" or "Need to switch partition from partA to partB", you have to force the device into partA mode, before continuing. This can be done by changing the PKRstCnt to 5 and resetting the device. setenv PKRstCnt 5 saveenv reset After you interrupt the startup process again, you should see: Need to switch partition from partB to partA You can now continue to the next step. If you see: "Current Partition is : partA", you can continue to the next step. 2. Prevent partition switching. To prevent the device from switching partitions, we are going to modify the startup command. set bootcmd "setenv PKRstCnt 0; saveenv; bootipq" setenv 3. First boot Now, we have to boot the OpenWrt intifs. The easiest way to do this is by using Tiny PXE. You can also use the normal U-Boot tftp method. Run "bootp" this will get an IP from the DHCP server and possibly the firmware image. If it doesn't download the firmware image, run "tftpboot". Now run "bootm" to run the image. You might see: "ERROR: new format image overwritten - must RESET the board to recover" this means that the image you are trying to load is too big. Use a smaller image for the initial boot. 4. Install OpenWrt from initfs Once you are booted into OpenWrt, transfer the OpenWrt upgrade image and use sysupgrade to install OpenWrt to the device. Signed-off-by: Kristjan Krušič <kristjan.krusic@krusic22.com>
* nftables: update to 1.0.7Nick Hainke2023-03-191-2/+2
| | | | | | | Release Notes: https://marc.info/?l=netfilter-devel&m=167873533214563&w=2 Signed-off-by: Nick Hainke <vincent@systemli.org>
* libnftnl: update to 1.2.5Nick Hainke2023-03-191-3/+3
| | | | | | | | | Upstream switched to "tar.xz". Release Notes: https://www.spinics.net/lists/netfilter/msg61016.html Signed-off-by: Nick Hainke <vincent@systemli.org>
* ipq-wifi: bump to latest git HEADChristian Marangi2023-03-181-2/+2
| | | | | | 86180c4 ath10k-firmware: IPQ4019 hw1.0: Rename variant to ZTE MF18A specific BDF Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq-wifi: bump to latest git HEADChristian Marangi2023-03-181-3/+3
| | | | | | | 1f35a8c ath10k-firmware: IPQ4019 hw1.0: Add variant to Teltonika RUTX10 specific BDF a49672f ath10k-firmware: QCA99X0 hw2.0: Add variant to ZTE MF18A specific BDF Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: tcindex classifier has been retiredJohn Audia2023-03-181-2/+1
| | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/net/sched?h=v5.15.100&id=7c183dc0af472dec33d2c0786a5e356baa8cad19 Signed-off-by: John Audia <therealgraysky@proton.me>
* uencrypt: split common and library-specific codeEneas U de Queiroz2023-03-176-294/+382
| | | | | | | | | | | | | | This splits the code in 4 files: - uencrypt.h - uencrypt.c - main program - uencrypt-openssl.c - OpenSSL/wolfSSL implementation - uencrypt-mbedtls - mbedTLS implementation Other changes, accounting for ~400 bytes increase in ipk size: - more error condition checking and reporting, - hide key and iv command line arguments Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* uencrypt: add support for mbedtlsEneas U de Queiroz2023-03-174-52/+309
| | | | | | | | | | | | | | This commit includes some additional changes: - better handling of iv and keys in openssl/wolfssl variants - fix compiler warnings and whitespace - build all 3 variants as separate packages - adjust the new package name in targets' DEVICE_PACKAGES - remove PKG_FLAGS:=nonshared [Beeline SmartBox Flash - OK] Tested-by: Mikhail Zhilkin <csharper2005@gmail.com> [after test: replaced a hardcoded IV size of 16 by cipher_info->iv_size] Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* ipq-wifi: bump to latest git HEAD and add 8devices boardsMantas Pucka2023-03-171-3/+7
| | | | | | | | | 2dae618 ipq-wifi: update 8devices Jalapeno BDF 08e92db ipq-wifi: update 8devices Habanero BDF Signed-off-by: Mantas Pucka <mantas@8devices.com> [ split ipq40xx changes in separate commit ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* rpcd: bump to latest git HEADChristian Marangi2023-03-171-4/+4
| | | | | | | | | d978830 rc: add option to get info for a single script in list method 632b4fc rc: add option to skip running check for list method 5577db9 rc: add support for scanning USE_PROCD and skip running if not supported 4de3f02 rc: fix and improve script scanning START and STOP Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* firmware: ipq-wifi: use project branch and drop local fileChristian Marangi2023-03-1536-5/+8
| | | | | | | Source BDF files out of project dedicated repository and drop local file from openwrt main repository. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* odhcp6c: add "verbose" optionMark Mentovai2023-03-142-3/+6
| | | | | | | | | odhcp6c logs messages related to its activity when invoked with -v, but there is no way to configure this from within OpenWrt. This adds a UCI option to turn on odhcp6c logging, disabled by default. To enable, set, for example, network.wan6.verbose = 1. Signed-off-by: Mark Mentovai <mark@mentovai.com>
* elfutils: update to 1.89Nick Hainke2023-03-122-4/+6
| | | | | | | | | | Release Notes: https://sourceware.org/pipermail/elfutils-devel/2023q1/006023.html Refresh patch: - 003-libintl-compatibility.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* strace: update to 6.2Nick Hainke2023-03-101-2/+2
| | | | | | | Release Notes: https://github.com/strace/strace/releases/tag/v6.2 Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: modules: add missing kmod-mdio-devres for lan743xHauke Mehrtens2023-03-101-1/+1
| | | | | | | This fixes a build problem on some targets. Fixes: 3e9005546a ("kernel: modules: package Microchip LAN743x PCIe gigE driver") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* binutils: Deactivate msgpackHauke Mehrtens2023-03-091-0/+1
| | | | | | | | | | | | Deactivate the msgpack option. The binutils build might detect the libmsgpackc.so.2 library and will try to link against it, if it is not explicitly deactivated. This prevents the following build errors seen in the build bots. Package binutils is missing dependencies for the following libraries: libmsgpackc.so.2 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: modules: add missing kmod-ptp for lan743xChuanhong Guo2023-03-091-1/+1
| | | | | Fixes: 3e9005546a ("kernel: modules: package Microchip LAN743x PCIe gigE driver") Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: modules: package Microchip LAN743x PCIe gigE driverTim Harvey2023-03-081-0/+16
| | | | | | Package the Microchip LAN743x PCIe gigE driver Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ramips: add support for SNR-CPE-ME2-SFPAleksey Nasibulin2023-03-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SNR-CPE-ME2-SFP is a wireless router with SFP cage manufactured by SNR/NAG company. Specification: - SoC: MediaTek MT7621A - CPU: 880MHz - Flash: 16 MB (GD25Q127CSIG) - RAM: 256 MB - WLAN: 2.4 GHz, 5 GHz (MediaTek MT7615DN) - Ethernet: 4x 10/100/1000 Mbps - SFP cage (using RTL8211FS-CG) - USB 3.0 port - Power: 12 VDC, 2 A Flash instruction via TFTP: 1. Boot SNR-CPE-ME2 to recovery mode (press reset button and power on device, hold button for ~10 seconds) 2. Send firmware via TFTP client: TFTP Server address: 192.168.1.1 TFTP Client address: 192.168.1.131 3. Wait ~120 seconds to complete flashing 4. Do sysupgrade using web-interface MAC Addresses(stock) -------------------- +----------+------------------+-------------------+ | use | address | example | +----------+------------------+-------------------+ | Device | label | 6A:C4:DD:xx:xx:28 | | Ethernet | + 1 | 6A:C4:DD:xx:xx:29 | | 2g | + 2 | 6A:C4:DD:xx:xx:2A | | 5g | + 3 | 6A:C4:DD:xx:xx:2B | +----------+------------------+-------------------+ Notes: - Reading sfp eeprom is not supported [1] (driver issue). Stock image has the same situation. References: 1. https://forum.openwrt.org/t/mt7621-and-reading-sfp-eeprom/152249 Signed-off-by: Aleksey Nasibulin <alealexpro100@ya.ru>
* qosify: update to the latest versionFelix Fietkau2023-03-071-3/+3
| | | | | | | | | ca4509cf84d2 bpf: switch to using bpf_skb_utils.h d064439009d0 qosify-bpf: skip unnecessary flow lookups 9c625ae96f2d map: fix deleting port based rules 9a47ea4b683d map: fix return code check for bpf_map_get_next_key calls Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mpc85xx: add support for Watchguard Firebox T10David Bauer2023-03-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Freescale P1010 RAM: 512MB FLASH: 1 MB SPI-NOR 512 MB NAND ETH: 3x Gigabite Ethernet (Atheros AR8033) SERIAL: Cisco RJ-45 (115200 8N1) RTC: Battery-Backed RTC (I2C) Installation ------------ 1. Patch U-Boot by dumping the content of the SPI-Flash using a SPI programmer. The SHA1 hash for the U-Boot password is currently unknown. A tool for patching U-Boot is available at https://github.com/blocktrron/t10-uboot-patcher/ You can also patch the unknown password yourself. The SHA1 hash is E597301A1D89FF3F6D318DBF4DBA0A5ABC5ECBEA 2. Interrupt the bootmenu by pressing CTRL+C. A password prompt appears. The patched password is '1234' (without quotation marks) 3. Download the OpenWrt initramfs image. Copy it to a TFTP server reachable at 10.0.1.13/24 and rename it to uImage. 4. Connect the TFTP server to ethernet port 0 of the Watchguard T10. 5. Download and boot the initramfs image by entering "tftpboot; bootm;" in U-Boot. 6. After OpenWrt booted, create a UBI volume on the old data partition. The "ubi" mtd partition should be mtd7, check this using $ cat /proc/mtd Create a UBI partition by executing $ ubiformat /dev/mtd7 -y 7. Increase the loadable kernel-size of U-Boot by executing $ fw_setenv SysAKernSize 800000 8. Transfer the OpenWrt sysupgrade image to the Watchguard T10 using scp. Install the image by using sysupgrade: $ sysupgrade -n <path-to-sysupgrade> Note: The LAN ports of the T10 are 1 & 2 while 0 is WAN. You might have to change the ethernet-port. 9. OpenWrt should now boot from the internal NAND. Enjoy. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: enable radius server supportFelix Fietkau2023-03-071-1/+1
| | | | | | This is useful in combination with the built-in eap server support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add missing return code for the bss_mgmt_enable ubus methodFelix Fietkau2023-03-071-0/+2
| | | | | | Fixes bogus errors on ubus calls Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for defining multiple acct/auth serversFelix Fietkau2023-03-071-25/+25
| | | | | | | This allows adding backup servers, in case the primary ones fail. Assume that port and shared secret are going to be the same. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* openssl: fix variable reference in conffilesEneas U de Queiroz2023-03-061-3/+3
| | | | | | | | | | | | Fix the trivial abscence of $() when assigning engine config files to the main libopenssl-config package even if the corresponding engines were not built into the main library. This is mostly cosmetic, since scripts/ipkg-build tests the file's presence before it is actually included in the package's conffiles. Fixes: 30b0351039 "openssl: configure engine packages during install" Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* openssl: fix sysupgrade failure with devcryptoEneas U de Queiroz2023-03-064-5/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bump to 3.0.8 inadvertently removed patches that are needed here, but were not adopted upstream. The most important one changes the default value of the DIGESTS setting from ALL to NONE. The absence of this patch causes a sysupgrade failure while the engine is in use with digests enabled. When this happens, the system fails to boot with a kernel panic. Also, explicitly set DIGESTS to NONE in the provided config file, and change the default ciphers setting to disable ECB, which has been recommended for a long time and may cause trouble with some apps. The config file change by itself is not enough because the config file may be preserved during sysupgrade. For people affected by this bug: You can either: 1. remove, the libopenssl-devcrypto package 2. disable the engine in /etc/config/openssl; 3. change /etc/ssl/engines.cnf.d/devcrypto.cnf to set DIGESTS=NONE; 4. update libopenssl-devcrypto to >=3.0.8-3 However, after doing any of the above, **you must reboot the device before running sysupgrade** to ensure no running application is using the engine. Running `/etc/init.d/openssl restart` is not enough. Fixes: 7e7e76afca "openssl: bump to 3.0.8" Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* binutils: Update to version 2.40Hauke Mehrtens2023-03-053-5/+97
| | | | | | | | | | | | | | | | | | | binutils 2.39: https://lists.gnu.org/archive/html/info-gnu/2022-08/msg00002.html binutils 2.40: https://lists.gnu.org/archive/html/info-gnu/2023-01/msg00003.html This version includes a new libsframe.so library, pack it into the libbfd package as it is used by this library. Also deactivate some optional configuration options for now. An extra patch to fix compile problem in AARCH64 is added. gprofng needs a C++ standard library, deactivate it for now. Activate feature-disassembler-init-styled in bpftools too to fix compilation with the updated binutils. An bpftool version 7.0 or later is needed for binutils 2.39 and later. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bpftool: Update to version 7.1.0Hauke Mehrtens2023-03-053-11/+11
| | | | | | | | | | | | | | | | | | | bpftool changelog: https://github.com/libbpf/bpftool/releases libbpf changelog: https://github.com/libbpf/libbpf/releases This updates the bfptool to version 7.1.0. This also includes an update of the libbpf to version 1.1. This also adds some new feature options and removes some old ones which were also removed form the source code. zlib for example is now mandatory. Add -flto also to LD flags to make it really work. Before this change bpftool was on a git commit between version 6.7 and 6.8 and libbpf was on a commit between version 0.7 and 0.8. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: enable ATH9K_HWRNGRosen Penev2023-03-051-2/+2
| | | | | | | | | in kernel 5.17, fcd09c90c3c5254b18ef34e30c57c65d34290a84 integrated it better with thee random framework. Gives boot time randomness on supported devices. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ksmbd: update to 3.4.7Rosen Penev2023-03-053-103/+4
| | | | | | | | Remove upstreamed patches. Switch to normal tarballs. Codeload recently had a reproducibility issue. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: add kmod-hwmon-max6642 supportTim Harvey2023-03-051-0/+15
| | | | | | Add package for Maxim MAX6642 i2c based temperature sensor. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* uci: update to git HEADHauke Mehrtens2023-03-051-4/+4
| | | | | | | | | | | | | | | | 5de3871 cli: drop redundant uci_add_delta_path() call for -P f49a2fd delta: simplify uci_load_delta() by using a helper 9b6605e uci: fix use-after-free uci_set on update option b7ceda9 uci: maintain option position in uci_set 7e01d66 uci: optimize update option in uci_set 47697e6 uci: fix use-after-free uci_add_list 74f2797 uci: fix atomicity of uci_add_list b2f3417 uci: maintain option position in uci_add_list 16e8a3b uci: fix memory leak uci_set on update section ae61e1c uci: optimize update section in uci_set 04d0c46 uci: macro uci_alloc_element not in uci.h Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* dtc: update to 1.7.0Nick Hainke2023-03-052-139/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changelog: 039a994 Bump version to v1.7.0 3f29d6d pylibfdt: add size_hint parameter for get_path 2022bb1 checks: Update #{size,address}-cells check for 'dma-ranges' abbd523 pylibfdt: Work-around SWIG limitations with flexible arrays a41509b libfdt: Replace deprecated 0-length arrays with proper flexible arrays 2cd89f8 dtc: Warning rather than error on possible truncation of cell values 55778a0 libfdt: tests: add get_next_tag_invalid_prop_len 7359034 libfdt: prevent integer overflow in fdt_next_tag 035fb90 libfdt: add fdt_get_property_by_offset_w helper 98a0700 Makefile: fix infinite recursion by dropping non-existent `%.output` a036cc7 Makefile: limit make re-execution to avoid infinite spin c6e9210 libdtc: remove duplicate judgments e37c256 Don't generate erroneous fixups from reference to path 5045465 libfdt: Don't mask fdt_get_name() returned error e64a204 manual.txt: Follow README.md and remove Jon f508c83 Update README in MANIFEST.in and setup.py to README.md c2ccf8a Add description of Signed-off-by lines 90b9d9d Split out information for contributors to CONTRIBUTING.md 0ee1d47 Remove Jon Loeliger from maintainers list b33a73c Convert README to README.md 7ad6073 Allow static building with meson fd9b8c9 Allow static building with make fda71da libfdt: Handle failed get_name() on BEGIN_NODE c7c7f17 Fix test script to run also on dash shell 01f23ff Add missing relref_merge test to meson test list ed31080 pylibfdt: add FdtRo.get_path() c001fc0 pylibfdt: fix swig build in install 26c54f8 tests: add test cases for label-relative path references ec7986e dtc: introduce label relative path references 651410e util: introduce xstrndup helper 4048aed setup.py: fix out of tree build ff5afb9 Handle integer overflow in check_property_phandle_args() ca72944 README: Explain how to add a new API function c0c2e11 Fix a UB when fdt_get_string return null cd5f69c tests: setprop_inplace: use xstrdup instead of unchecked strdup a04f690 pylibfdt: add Property.as_*int*_array() 8310271 pylibfdt: add Property.as_stringlist() d152126 Fix Python crash on getprop deallocation 17739b7 Support 'r' format for printing raw bytes with fdtget 45f3d1a libfdt: overlay: make overlay_get_target() public c19a4ba libfdt: fix an incorrect integer promotion 1cc41b1 pylibfdt: Add packaging metadata db72398 README: Update pylibfdt install instructions 383e148 pylibfdt: fix with Python 3.10 23b56cb pylibfdt: Move setup.py to the top level 69a7607 pylibfdt: Split setup.py author name and email 0b106a7 pylibfdt: Use setuptools_scm for the version c691776 pylibfdt: Use setuptools instead of distutils 5216f3f libfdt: Add static lib to meson build 4eda259 CI: Cirrus: bump used FreeBSD from 12.1 to 13.0 0a3a9d3 checks: Add an interrupt-map check 8fd2474 checks: Ensure '#interrupt-cells' only exists in interrupt providers d8d1a9a checks: Drop interrupt provider '#address-cells' check 52a16fd checks: Make interrupt_provider check dependent on interrupts_extended_is_cell 37fd700 treesource: Maintain phandle label/path on output e33ce1d flattree: Use '\n', not ';' to separate asm pseudo-ops d24cc18 asm: Use assembler macros instead of cpp macros ff3a30c asm: Use .asciz and .ascii instead of .string 5eb5927 fdtdump: fix -Werror=int-to-pointer-cast 0869f82 libfdt: Add ALIGNMENT error string 69595a1 checks: Fix bus-range check 72d09e2 Makefile: add -Wsign-compare to warning options b587787 checks: Fix signedness comparisons warnings 69bed6c dtc: Wrap phandle validity check 9102211 fdtget: Fix signedness comparisons warnings d966f08 tests: Fix signedness comparisons warnings ecfb438 dtc: Fix signedness comparisons warnings: pointer diff 5bec74a dtc: Fix signedness comparisons warnings: reservednum 24e7f51 fdtdump: Fix signedness comparisons warnings Remove upstreamed: - 0001-Support-r-format-for-printing-raw-bytes-with-fdtget.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: refresh patchesNick Hainke2023-03-055-5/+5
| | | | | | | | | | | | | The last mac80211 commits did not refresh the patches. Refresh: - ath/402-ath_regd_optional.patch - ath10k/080-ath10k_thermal_config.patch - ath10k/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch - ath9k/551-ath9k_ubnt_uap_plus_hsr.patch - rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* bpf-headers: fix package categoryChukun Pan2023-03-041-1/+1
| | | | | | | This removes the non-selectable 'Kernel' item when make menuconfig. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* uboot-mediatek: mark all packages as hiddenFelix Fietkau2023-03-041-0/+1
| | | | | | | They are enabled by selecting devices. Fixes build errors when enabling extra devices without creating a new config from scratch. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix regression in sw a-msdu tx introduced in mesh improvement patchesFelix Fietkau2023-03-033-21/+12
| | | | | Fixes: 6262d3eb068c ("mac80211: sync mesh fast xmit patch with upstream requested changes") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* fritz-tools: fix segfault in caldata-extractDavid Bauer2023-03-022-4/+6
| | | | | | | * Fix incorrect error message in case input file opening fails * Don't close files in case the pointers are invalid Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: add mesh fast-rx supportFelix Fietkau2023-03-021-0/+77
| | | | | | | This helps bring down rx CPU usage by avoiding calls to the rx handlers in the slow path. Supports forwarding and local rx, including A-MSDU. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* linux-firmware: add mt7986 offload firmwareFelix Fietkau2023-03-021-0/+10
| | | | | | | This is needed for WED support on MT7986. Enable it by default for the filogic subtarget. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2023-03-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | 71d84bfb343e wifi: mt76: mt76x0u: report firmware version through ethtool 99d13130b517 wifi: mt76: support ww power config in dts node 09c614734880 Revert "wifi: mt76: mt7996: rely on mt76_connac2_mac_decode_he_radiotap" e1c9c1cb50a8 mt76: mt7921: Let PCI core handle power state and use pm_sleep_ptr() 34064dbcd72a wifi: mt76: mt7921e: add pci .shutdown() support 18ccfa73a9e2 wifi: mt76: remove redundent MCU_UNI_CMD_* definitions 282845ce7f3d wifi: mt76: mt7921: fix wrong command to set STA channel 546934dacfd4 wifi: mt76: mt7921: fix PCI DMA hang after reboot fc2ed0dfc5b0 wifi: mt76: mt7996: Remove unneeded semicolon 1b602db9c235 wifi: mt76: mt7915: unlock on error in mt7915_thermal_temp_store() ce2438aa616a wifi: mt76: mt7996: fix radiotap bitfield 17ec2146b8f0 wifi: mt76: dynamic channel bandwidth changes in AP mode ab2d3650a456 wifi: mt76: mt7915: expose device tree match table 90d78253498e wifi: mt76: mt7915: add dev->hif2 support for mt7916 WED device a69c34a60451 wifi: mt76: mt7915: rework init flow in mt7915_thermal_init() 39079b5e44a7 wifi: mt76: drop the incorrect scatter and gather frame f9ca70d6367a wifi: mt76: mt7915: add back 160MHz channel width support for MT7915 eff7666e1aa4 wifi: mt76: handle failure of vzalloc in mt7615_coredump_work 920bc6e1fc8e wifi: mt76: do not run mt76_unregister_device() on unregistered hw b0721b96927b wifi: mt76: connac: refresh tx session timer for WED device c32d6d849c43 wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add patch for allowing the driver to refresh aggregation sessionsFelix Fietkau2023-03-021-0/+60
| | | | | | Required by a mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport upstream HE/VHT capability handling changesFelix Fietkau2023-03-022-0/+136
| | | | | | Will be required by an mt76 update at some point Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: sync mesh fast xmit patch with upstream requested changesFelix Fietkau2023-03-021-19/+13
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix hwmon-gsc driverTim Harvey2023-03-014-337/+19
| | | | | | | | | Fix hwmon-gsc driver by replacing out-of-tree hwmon-gsc driver with in-tree driver that was merged in Linux v5.8: - remove the old out-of-tree module - add configuration for the in-tree modules Signed-off-by: Tim Harvey <tharvey@gateworks.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 19:23:51 +0000