aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.119John Audia2022-06-062-43/+0
| | | | | | | | | | Delete the crypto-lib-blake2s kmod package, as BLAKE2s is now built-in. Patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800, x86/64 Signed-off-by: John Audia <therealgraysky@proton.me>
* realtek: add support for ZyXEL GS1900-24ERaylynn Knight2022-06-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-24E is a 24 port gigabit switch similar to other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-24E * SoC: Realtek RTL8382M 500 MHz MIPS 4KEc * Flash: 16 MiB Macronix MX25L12835F * RAM: 128 MiB DDR2 SDRAM Nanya NT5TU128M8GE * Ethernet: 24x 10/100/1000 Mbps * LEDs: 1 PWR LED (green, not configurable) 1 SYS LED (green, configurable) 24 ethernet port link/activity LEDs (green, SoC controlled) * Buttons: 1 "RESET" button on front panel * Switch: 1 Power switch on rear of device * Power 120-240V AC C13 * UART: 1 serial header (JP2) with populated standard pin connector on the left side of the PCB. Pinout (front to back): + Pin 1 - VCC marked with white dot + Pin 2 - RX + Pin 3 - TX + PIn 4 - GND Serial connection parameters: 115200 8N1. Installation ------------ OEM upgrade method: * Log in to OEM management web interface * Navigate to Maintenance > Firmware * Select the HTTP radio button * Select the Active radio button * Use the browse button to locate the realtek-rtl838x-zyxel_gs1900-24e-initramfs-kernel.bin file and select open so File Path is updated with filename. * Select the Apply button. Screen will display "Prepare for firmware upgrade ...". *Wait until screen shows "Do you really want to reboot?" then select the OK button * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade -n /tmp/realtek-rtl838x-zyxel_gs1900-24e-squashfs-sysupgrade.bin it may be necessary to restart the network (/etc/init.d/network restart) on the running initramfs image. U-Boot TFTP method: * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-24E is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot from the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-rtl838x-zyxel_gs1900-24e-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade -n /tmp/openwrt-realtek-rtl838x-zyxel_gs1900-24e-squashfs-sysupgrade.bin it may be necessary to restart the network (/etc/init.d/network restart) on the running initramfs image. Signed-off-by: Raylynn Knight <rayknight@me.com>
* hostapd: drop wnm_disassoc_imminentStijn Tintel2022-06-061-45/+0
| | | | | | | | All known users of this ubus method have been updated to use the new bss_transition_request method instead. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: David Bauer <mail@david-bauer.net>
* ksmbd: update to 3.4.5Rosen Penev2022-06-052-101/+2
| | | | | | | | | | | Major changes are: Add support for smbd-direct multi-desctriptor. Add support for dkms. Add support for key exchange. Fix seveal bugs. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ipq40xx: add support for Linksys WHW01 v1Peter Adkins2022-06-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Linksys WHW01 v1 ("Velop") [FCC ID Q87-03331]. Specification ------------- SOC: Qualcomm IPQ4018 WiFi 1: Qualcomm QCA4019 IEEE 802.11b/g/n WiFi 2: Qualcomm QCA4019 IEEE 802.11a/n/ac Bluetooth: Qualcomm CSR8811 (A12U) Ethernet: Qualcomm QCA8072 (2-port) SPI Flash 1: Mactronix MX25L1605D (2MB) SPI Flash 2: Winbond W25M02GV (256MB) DRAM: Nanya NT5CC128M16IP-DI (256MB) LED Controller: NXP PCA963x (I2C) Buttons: Single reset button (GPIO). Notes ----- There does not appear to be a way to trigger TFTP recovery without entering U-Boot. The device must be opened to access the serial console in order to first flash OpenWrt onto a device from factory. The device has automatic recovery backed by a second set of partitions on the larger of the two SPI flash ICs. Both the primary and secondary must be flashed to prevent accidental rollback to "factory" after 3 failed boot attempts. Serial console -------------- A serial console is available on the following pins of the populated J2 connector on the device mainboard (115200 8n1). (<-- Top of PCB / Device) J2 [o o o o o o] | | | | | `-- GND | `---- TX `--------- RX Installation instructions ------------------------- 1. Setup TFTP server with server IP set to 192.168.1.236. 2. Copy compiled `...squashfs-factory.bin` to `nodes-jr.img` in tftp root. 3. Connect to console using pinout detailed in the serial console section. 4. Power on device and press enter when prompted to drop into U-Boot. 5. Flash first partition device via `run flashimg`. 6. Once complete, reset device and allow to power up completely. 7. Once comfortable with device upgrade reboot and drop back into U-Boot. 8. Flash the second partition (recovery) via `run flashimg2`. Revert to "factory" ------------------- 1. Download latest firmware update from vendor support site. 2. Copy extracted `.img` file to `nodes-jr.img` in tftp root. 3. Connect to console using pinout detailed in the serial console section. 4. Power on device and press enter when prompted to drop into U-Boot. 5. Flash first partition device via `run flashimg`. 6. Once complete, reset device and allow to power up completely. 7. Once comfortable with device upgrade reboot and drop back into U-Boot. 8. Flash the second partition (recovery) via `run flashimg2`. Link: https://github.com/openwrt/openwrt/pull/3682 Signed-off-by: Peter Adkins <peter@sunkenlab.com> (calibration from nvmem, updated to 5.10+5.15) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: modules: make ar8216/8327 modularizableChristian 'Ansuel' Marangi2022-06-051-0/+16
| | | | | | | Make ar8216/8327 swconfig driver modularizable and add entry to the netdevices.mk kernel modules file. Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
* mac80211: add airtime fairness rework/fixesFelix Fietkau2022-06-043-2/+986
| | | | | | | latency and short-term fairness is improved by fixing the tx queue sorting so that it considers the pending AQL budget Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: crypto: add kmod-crypto-chacha20poly1305Xu Wang2022-06-031-0/+12
| | | | | | | | Needed by strongSwan IPsec VPN for strongswan-mod-chapoly. Not to be confused with kmod-crypto-LIB-chacha20poly1305, which is an 8-byte nonce version used by wireguard. Signed-off-by: Xu Wang <xwang1498@gmx.com>
* mt76: update to the latest versionFelix Fietkau2022-06-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 6da21a0b7280 linux-firmware: update firmware for MT7921 WiFi device 4876688c41dc linux-firmware: update firmware for MT7915 79b1b86040de linux-firmware: add firmware for MT7986 784c27b159b9 linux-firmware: add firmware for MT7922 079e41dc71a1 mt76: mt7915: configure soc clocks in mt7986_wmac_init 747c70fc6c89 mt76: connac: use skb_put_data instead of open coding e98f58815018 mt76: mt7915: update mt7986 patch in mt7986_wmac_adie_patch_7976() b7104b4b2f2d mt76: mt7915: fix twt table_mask to u16 in mt7915_dev d39368f336ee mt76: mt7915: reject duplicated twt flows 4718ed04a655 mt76: mt7915: limit minimum twt duration 84319691b742 mt76: mt7915: reowrk SER debugfs knob bac5f22365a2 mt76: mt7915: introduce mt7915_mac_severe_check() 81524067686c mt76: mt7915: move MT_INT_MASK_CSR to init.c 2b7f5e85290e mt76: mt7915: add support for 6G in-band discovery 31273183ea0a mt76: mt7615/mt7915: do reset_work with mt76's work queue bb54f5e1c115 mt76: mt7915: improve error handling for fw_debug knobs 838529da6470 mt76: mt7915: add more statistics from fw_util debugfs knobs 3a65deb93737 mt76: add gfp to mt76_mcu_msg_alloc signature 8e87669eefcf mt76: mt7921: add ipv6 NS offload support e1b2c18eee29 mt76: mt7915: fix endianness in mt7915_rf_regval_get 0742eaeafee2 mt76: mt76x02u: fix possible memory leak in __mt76x02u_mcu_send_msg d299ad96d867 mt76: mt7915: fix endian bug in mt7915_rf_regval_set() 380eac6f31ec mt76: add 6 GHz band support in mt76_sar_freq_ranges 268ce38e9e36 mt76: mt7921: introduce ACPI SAR support 8c27300b4271 mt76: mt7921: introduce ACPI SAR config in tx power 54b6504a3ef8 mt76: mt7915: add more ethtool stats cdd66d642977 mt76: add DBDC rxq handlings into mac_reset_work b284684f5cba mt76: mt7921: add PATCH_FINISH_REQ cmd response handling f8b9be4287cc mt76: mt7921s: fix firmware download random fail 28b19d2cc53f mt76: mt7915: add missing bh-disable around tx napi enable/schedule 1d8af168e86f mt76: mt7615: add missing bh-disable around rx napi enable/schedule Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add a bug fix for a rare crashFelix Fietkau2022-06-021-0/+38
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq40xx: add Aruba AP-365 specific BDFDavid Bauer2022-06-022-0/+2
| | | | | | | | | | | | | Aruba deploys a BDF in the root filesystem, however this matches the one used for the DK04 reference board. The board-specific BDFs are built into the kernel. The AP-365 shows sinificant degraded performance with increased range when used with the reference BDF. Replace the BDF with the one extracted from Arubas kernel. Signed-off-by: David Bauer <mail@david-bauer.net>
* fstools: update to git HEADDaniel Golle2022-06-021-3/+3
| | | | | | 93369be Revert "fstools: remove SELinux restorecon hack" Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ubus: update to git HEADDaniel Golle2022-06-011-4/+4
| | | | | | | 2f793a4 lua: add optional path filter to objects() method 2bebf93 ubusd: handle invoke on event object without data Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* netifd: update to git HEADDaniel Golle2022-06-011-3/+3
| | | | | | | 2e1fcf4 netifd: fix hwmode for 60g band 39ef9fe interface-ip: fix memory corruption bug when using jail network namespaces Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to git HEADDaniel Golle2022-06-011-3/+3
| | | | | | | 557c98e init: selinux: don't relabel virtual filesystems 7a00968 init: only relabel rootfs if started from initramfs Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* rpcd: update to latest Git HEADChristian 'Ansuel' Marangi2022-06-011-3/+3
| | | | | | | 1c48257 iwinfo: fix compilation error with GCC 12 [remove extra change in Makefile] Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
* Revert "rpcd: update to latest Git HEAD"Christian 'Ansuel' Marangi2022-06-011-8/+3
| | | | This reverts commit 8885cf88279fd131c163d0ac34aeeef0bbff0ceb.
* rpcd: update to latest Git HEADChristian 'Ansuel' Marangi2022-06-011-3/+8
| | | | | | 1c48257 iwinfo: fix compilation error with GCC 12 Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
* uhttpd: update to latest Git HEADChristian 'Ansuel' Marangi2022-06-011-3/+3
| | | | | | | d59d732 client: fix compilation error with GCC 12 51283f9 fix compiler uninitialized variable Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
* ucode: update to latest Git HEADJo-Philipp Wich2022-06-011-3/+3
| | | | | | | | d996047 syntax: adjust number literal parsing and string to number conversion 9efbe18 lib: refactor `uc_int()` Fixes: #9923 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* firewall4: update to latest Git HEADJo-Philipp Wich2022-05-311-3/+3
| | | | | | | | | | | | | | 210991d fw4: prefer /dev/stdin if available 4e5e322 fw4: make `fw4 restart` behavior more robust 221040e ruleset: emit time ranges when both start and stop times are specified 30a7d47 fw4: fix datetime parsing fb9a6b2 ruleset: correct mangle_output chain type 6dd2617 fw4: fix logic flaw in testing hw flow offloading support c7c9c84 fw4: ensure that negative bitcounts are properly translated c4a78ed fw4: fix typo in emitted set types Fixes: #9764, #9923, #9927, #9935, #9955 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ucode: update to latest Git HEADJo-Philipp Wich2022-05-311-3/+3
| | | | | | | da3f089 lib: rework uc_index() implementation 559029e ci: make jobs faster during pull request testing Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mac80211: introduce BSS color collision detectionDavid Bauer2022-05-291-0/+118
| | | | | | | | | | | | | | | | | | Add ieee80211_rx_check_bss_color_collision routine in order to introduce BSS color collision detection in mac80211 if it is not supported in HW/FW (e.g. for mt7915 chipset). Add IEEE80211_HW_DETECTS_COLOR_COLLISION flag to let the driver notify BSS color collision detection is supported in HW/FW. Set this for ath11k which apparently didn't need this code. Tested-by: Peter Chiu <Chui-Hao.Chiu@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/a05eeeb1841a84560dc5aaec77894fcb69a54f27.1648204871.git.lorenzo@kernel.org [clarify commit message a bit, move flag to mac80211] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-imx: fix wrong make flags overridingPetr Štetiar2022-05-281-2/+2
| | | | | | | | | | | | | | | | | | | Buidbots are currently choking on the following compile error: In file included from tools/aisimage.c:9: include/image.h:1133:12: fatal error: openssl/evp.h: No such file or directory # include <openssl/evp.h> ^~~~~~~~~~~~~~~ compilation terminated. This is caused by a complete overriding of make flags which are provided correctly in `UBOOT_MAKE_FLAGS` variable, but currently overriden instead of extended. This then leads to the usage of build host include dirs, which are not available. Fix it by extending `UBOOT_MAKE_FLAGS` variable in all device recipes. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ksmbd: fix ipc error and crashMarius Dinu2022-05-271-0/+99
| | | | | | | | | Original patch: https://github.com/cifsd-team/ksmbd-tools/issues/227 adapted for ksmbd kernel module v3.4.3 by me. Fixes crash in v3.4.3 only. Use original patch when updating to v3.4.4 as this one will fail hunk #1. Signed-off-by: Marius Dinu <m95d+git@psihoexpert.ro>
* netifd: update to the latest versionFelix Fietkau2022-05-231-3/+3
| | | | | | | 4b4849cf5e5a interface-ip: unify host and proto route handling 507c0513d176 interface-ip: add support for excluding interfaces in host route lookup Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libnl-tiny: update to the latest versionFelix Fietkau2022-05-231-4/+4
| | | | | | b5b2ba09c4f1 netlink: add NLA_F_NESTED to all nested attributes Signed-off-by: Felix Fietkau <nbd@nbd.name>
* selinux-policy: update to version 1.2.3Dominick Grift2022-05-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 86ca9c6 devstatus: prints to terminal 95de949 deal with /rom/dev/console label inconsistencies ab6b6ee uci: hack to deal with potentially mislabeled char files acf9172 dnsmasq this can't be right 021db5b luci-app-tinyproxy cf3a9c4 support/secmark: removes duplicate loopback rules eeb2610 dhcp servers: recv dhcp client packets d5a5fc3 more support/secmark "fixes" 35d8604 update support secmark 4c155c0 packets these were caused by labeling issues with loopback fad35a5 nftables reads routing table f9c5a04 umurmur: kill an mumur instance that does not run as root 10a10c6 mmc stordev make this consistent ab3ec5b Makefile: sort with LC_ALL=C b34eaa5 fwenv rules 8c2960f adds rfkill nodedev and some mmc partitions to stordev 5a9ffe9 rcboot runs fwenv with a transition 9954bf6 dnsmasq in case of tcp ab66468 dnsmasq try this 5bfcb88 dnsmasq stubby not sure why this is happening 863f549 luci not sure why it recv and send server packets d5cddb0 uhttpd sends sigkill luci cgi 44cc04d stubby: it does not maintain anything in there db730b4 Adds stubby ccbcf0e tor simplify network access a308065 tor basic a9c0163 znc loose ends 327a9af acme: allow acme_cleanup.sh to restart znc 4015614 basic znc 7ef14a2 support/secmark: clarify some things 3107afe README: todo qrencode 943035a README and secmark doc 4c90937 ttyd: fix that socket leak again 3239adf dnsmasq icmp packets and fix a tty leak issue b41d38f Makefile: optimize 95d05b1 sandbox dontaudit ttyd leak 0b7d670 rpcd: reads mtu e754bf1 opkg-lists try this 35fb530 opkg-lists: custom 4328754 opkg try to address mislabeled /tmp/opkg-lists 3e2385c rcnftqos 95eae2d ucode c86d366 luci diagnostics e10b443 rpcd packets and wireguard/luci a25e020 igmpproxt packets 0106f00 luci dcef79c nftqos related 3c9bc90 related to nft-qos and luci f8502d4 dnsmasq more related to /usr/lib/dnsmasq/dhcp-script.sh 29a4271 dnsmasq: related to /usr/lib/dnsmasq/dhcp-script.sh 0c5805a some nft-qos 1100b41 adds a label for /tmp/.ujailnoafile e141a83 initscript: i labeled ujail procd.execfile a3b0302 Makefile: adds a default target + packets target 6a3f8ef label usign as opkg and label fwtool and sysupgrade 04d1cc7 sysupgrade: i meant don't do the fc spec 763bec0 sysupgrade: dont do /tmp/sysupgrade.img af2306f adds a failsafe.tmpfile and labels validate_firmware_image 5b15760 fwenv: comment doesnt make sense 370ac3b fwenv: executes shell 67e3fcb fwenv: adds fw_setsys 544d211 adds procd execfile module to label procd related exec files 99d5f13 rclocalconffile: treat /etc/rc.button like /etc/rc.local 4dfd662 label uclient-fetch the same as wget 75d8212 osreleasemiscfile: adds /etc/device_info 0c1f116 adds a rcbuttonconffile for /etc/rc.button (base-files) ccd23f8 adds a syslog.conffile for /etc/syslog.conf (busybox) f790600 adds a libattr.conffile for /etc/xattr.conf fcc028e fwenv: adds fwsys 1255470 xtables: various iptables alternatives a7c4035 Revert "sqm: runs xtables, so also allow nftables" 0d331c3 sqm: runs xtables, so also allow nftables f34076b acme: will run nftables in the near future 6217046 allow ssl.read types to read /tmp/etc/ssl/engines.cnf d0deea3 fixes dns packets 8399efc Revert "sandbox: see if dontauditing this affects things" 73d716a sandbox: see if dontauditing this affects things b5ee097 sandbox: also allow readinherited dropbear pipes 12ee46b iwinfo traverses /tmp/run/wpa_supplicant 4a4d724 agent.cil: also reads inherited dropbear pipes d48013f support/secmark: i tightened my dns packet policy 645ad9e dns packets redone 4790b25 dnsnetpacket: fix obj macro template d9fafff redo dns packets 0a68498 ttyd: leaks a netlink route socket 1d2e6be .gitattributes: remove todo e1bb954 usbutil: reads bus sysfile symlinks d275a32 support/secmark: clean it up a little af5ce12 Makefile: exclude packet types in default make target 3caacdf support/secmark: document tunable/boolean e3dd3e6 invalidpacketselinuxbool: make it build-time again 54f0ccf odhcpd packet fix 4a864ba contrib/secmark: add a big FAT warning bead937 contrib/secmark: adds note about secmark support 146ae16 netpacket remove test 2ce9899 dns packets, odhcp6c raw packet, 4123 ntpnts for netnod 070a45f chrony and unbound packets eba894f rawip socket packets cannot be labeled 656ae0b adds isakmp (500), ipsec-nat-t (4500) and rawip packet types 35325db adds igmp packet type 5cf444c adds icmp packet type 2e41304 sandbox some more packet access for sandbox net 12caad6 packet accesses b8eb9a8 adds a trunkload of packet types a42a336 move rules related to invalid netpeers and ipsec associations a9e40e0 xtables/nftables allow relabelto all packet types aa5a52c README: adds item to wish list 3a96eec experiment: simple label based packet filtering 26d6f95 nftables reads/writes fw pipes Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* firewall4: update to latest Git HEADJo-Philipp Wich2022-05-201-3/+3
| | | | | | | | | | | | | | | | | | | c22eeef fw4: support negative CIDR bit notation 628d791 hotplug: reliably handle interfaces with ubus zone hints d005293 fw4: store zone associations from ubus in statefile as well b268225 fw4: filter non hw-offload capable devices when resolving lower devices 57984e0 fw4: always resolve lower flowtable devices 7782017 tests: fix mocked `fd.read("line")` api 72b196d config: remove restictions on DHCPv6 allow rule f0cc317 fw4: refactor family selection for forwarding rules b0b8122 treewide: use modern syntax 05995f1 fw4: fix emitting device jump rules for family restricted zones b479815 fw4: fix family auto-selection for config nat rules 2816a82 ruleset: ensure that family-agnostic ICMP rules cover ICMPv6 as well 2379c3d tests: add test coverage for zone family selection logic Fixes: #5066, #9611, #9765, #9854 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ucode: update to latest Git HEADJo-Philipp Wich2022-05-201-3/+3
| | | | | | | | | 081871e compiler: fix segmentation fault on compiling unexpected unary expressions 090b426 fs: avoid input buffering with small limits in fs.readfile() 8da140f lib: introduce hexenc() and hexdec() 9a72423 Update README.md Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ipq-wifi: remove packaged BDF-s for MikroTik devicesRobert Marko2022-05-195-8/+0
| | | | | | | | | | | Since we now provide the BDF-s for MikroTik IPQ40xx devices on the fly, there is noneed to include package and ship them like we do now. This also resolves the performance issues that happen as MikroTik changes the boards and ships them under the same revision but they actually ship with and require a different BDF. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: ath10k: backport bus and device specific API 1 BDF selectionRobert Marko2022-05-196-14/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some ath10k IPQ40xx devices like the MikroTik hAP ac2 and ac3 require the BDF-s to be extracted from the device storage instead of shipping packaged API 2 BDF-s. This is required as MikroTik has started shipping boards that require BDF-s to be updated, as otherwise their WLAN performance really suffers. This is however impossible as the devices that require this are release under the same revision and its not possible to differentiate them from devices using the older BDF-s. In OpenWrt we are extracting the calibration data during runtime and we are able to extract the BDF-s in the same manner, however we cannot package the BDF-s to API 2 format on the fly and can only use API 1 to provide BDF-s on the fly. This is an issue as the ath10k driver explicitly looks only for the board.bin file and not for something like board-bus-device.bin like it does for pre-cal data. Due to this we have no way of providing correct BDF-s on the fly, so lets extend the ath10k driver to first look for BDF-s in the board-bus-device.bin format, for example: board-ahb-a800000.wifi.bin If that fails, look for the default board file name as defined previously. So, backport the upstream ath10k patch. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ath10k-ct: update to 2022-05-13Robert Marko2022-05-194-22/+22
| | | | | | | Update ath10k-ct to the latest version which includes the backported ath10k commit for requesting API 1 BDF-s with a unique name like caldata. Signed-off-by: Robert Marko <robimarko@gmail.com>
* bpf-headers: drop HOST_LOADLIBESStijn Tintel2022-05-181-1/+0
| | | | | | | HOST_LOADLIBES was renamed to KBUILD_HOSTLDLIBS in kernel 4.19. As the oldest kernel version we support is 5.10, cleanup HOST_LOADLIBES use. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* elfutils: move host build to toolsStijn Tintel2022-05-181-4/+0
| | | | | | | | | | | The upcoming dwarves host package requires elfutils. As dependencies for tools must exist in tools, we need to move elfutils host build there. As there is at least one package that depends on this, and there is no proper way to create such dependency in the build system, build it unconditionally when not building on macOS. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* bcm27xx-gpu-fw: update to latest versionÁlvaro Fernández Rojas2022-05-171-15/+15
| | | | | | Latest GPU FW contains multiple fixes and improvements. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx-userland: update to latest versionÁlvaro Fernández Rojas2022-05-171-3/+3
| | | | | | The latest version contains some fixes and additions. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* wolfssl: bump to v5.3.0-stableEneas U de Queiroz2022-05-153-45/+2
| | | | | | | | | This is mostly a bug fix release, including two that were already patched here: - 300-fix-SSL_get_verify_result-regression.patch - 400-wolfcrypt-src-port-devcrypto-devcrypto_aes.c-remove-.patch Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* openssl: bump to 1.1.1oEneas U de Queiroz2022-05-152-6/+6
| | | | | | | | | | This release comes with a security fix related to c_rehash. OpenWrt does not ship or use it, so it was not affected by the bug. There is a fix for a possible crash in ERR_load_strings() when configured with no-err, which OpenWrt does by default. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* util-linux: use meson to buildRosen Penev2022-05-1516-51/+384
| | | | | | | | | Compiles faster, is PIC by default, and does not have pkgconfig files with wrong paths. Add various fixes to it as it seems cross compilation was never tested. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* util-linux: update to 2.38Rosen Penev2022-05-151-3/+3
| | | | | | Various fixes. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libubox: update to the latest versionFelix Fietkau2022-05-151-3/+3
| | | | | | | | | f2d6752901f2 blob: clear buf->head when freeing a buffer 45210ce14136 list.h: add container_of_safe macro cfa372ff8aed blobmsg: implicitly reserve space for 0-terminator in string buf alloc d2223ef9da71 blobmsg: work around false positive gcc -Warray-bounds warnings Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-fritz4040: Add support for Toshiba NANDChristian Lamparter2022-05-141-3/+3
| | | | | | | | | | | | From Andreas Böhler: "Some revisions of the FRITZ!7530 use a Toshiba NAND with 8 bit ECC in contrast to the Macronix NAND with 4 bit ECC.". Uboot needs to know this in order to have a chance to load from the NAND. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq-wifi: drop upstreamed board-2.binChristian Lamparter2022-05-1425-39/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BDFs for the: Aruba AP-303 ASUS RT-AC42U AVM FRITZ!Repeater 1200 Buffalo WTR-M2133HP Cell C RTL30VW D-Link DAP-2610 EnGenius EAP2200 EnGenius EMD1 EnGenius EMR3500 EnGenius EMR5000 EZVIZ CS-W3-WD1200G EUP Google Wifi Linksys MR8300 V1.0 Luma WRTQ-329ACN MobiPromo CM520-79F NEC Platforms WG2600HP3 Plasma Cloud PA1200 (updated version) Plasma Cloud PA2200 ZTE MF286D were upstreamed to the ath10k-firmware repository and landed in linux-firmware.git. Furthermore the BDFs for the: 8devices Habanero OpenMesh A62 OpenMesh A42 AVM FRITZ!Box 4040 have been updated. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* linux-firmware: take linux-firmware.git's qca99x0 boardfileChristian Lamparter2022-05-141-12/+1
| | | | | | | | Kalle Valo managed to add the qca9980's boardfile in the upstream repository. Sourcing the file from his repository is no longer needed. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* linux-firmware: Update to version 20220509Christian Lamparter2022-05-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | git log --pretty=oneline --abbrev-commit 20220411..20220509 (sorted) amdgpu: 480d6c2 amdgpu: update dcn_3_1_6_dmcub firmware b4994be amdgpu: update gc_10_3_7_rlc firmware 61eb408 amdgpu: update psp_13_0_8 firmware fcf9d8c amdgpu: update yellow carp DMCUB firmware ath10k: 73743b8 ath10k: QCA4019 hw1.0: update board-2.bin 6ad0930 ath10k: QCA6174 hw3.0: update board-2.bin 729bd7f ath10k: QCA6174 hw3.0: update firmware-6.bin to WLAN.RM.4.4.1-00288-QCARMSWPZ-1 9fce09f ath10k: QCA9888 hw2.0: update board-2.bin b155d85 ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00156 44b8aee ath10k: QCA9984 hw1.0: update board-2.bin 4ad3bd3 ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00156 1962cba ath10k: QCA99X0 hw2.0: add board-2.bin Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* realtek: add support for ZyXEL GS1900-16Raylynn Knight2022-05-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-16 is a 16 port gigabit switch similar to other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-16 * SoC: Realtek RTL8382M 500 MHz MIPS 4KEc * Flash: 16 MiB Macronix MX25L12835F * RAM: 128 MiB DDR2 SDRAM Nanya NT5TU128M8HE * Ethernet: 16x 10/100/1000 Mbps * LEDs: 1 PWR LED (green, not configurable) 1 SYS LED (green, configurable) 16 ethernet port link/activity LEDs (green, SoC controlled) * Buttons: 1 "RESET" button on front panel * Power 120-240V AC C13 * UART: 1 serial header (J12) with populated standard pin connector on the right back of the PCB. Pinout (front to back): + Pin 1 - VCC marked with white dot + Pin 2 - RX + Pin 3 - TX + PIn 4 - GND Serial connection parameters: 115200 8N1. Installation ------------ OEM upgrade method: * Log in to OEM management web interface * Navigate to Maintenance > Firmware * Select the HTTP radio button * Select the Active radio button * Use the browse button to locate the realtek-generic-zyxel_gs1900-16-initramfs-kernel.bin file amd select open so File Path is update with filename. * Select the Apply button. Screen will display "Prepare for firmware upgrade ...". *Wait until screen shows "Do you really want to reboot?" then select the OK button * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade -n /tmp/realtek-generic-zyxel_gs1900-16-squashfs-sysupgrade.bin it may be necessary to restart the network (/etc/init.d/network restart) on the running initramfs image. U-Boot TFTP method: * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-16 is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot from the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-16-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade -n /tmp/openwrt-realtek-generic-zyxel_gs1900-16-squashfs-sysupgrade.bin it may be necessary to restart the network (/etc/init.d/network restart) on the running initramfs image. Signed-off-by: Raylynn Knight <rayknight@me.com> [removed duplicate patch title, align RAM specification] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* kernel: usb-xhci-pci-renesas: remove LINUX_5_10 dependency symbolChristian Lamparter2022-05-071-1/+0
| | | | | | | | With 5.4 out of the picture, remove LINUX_5_10 here. This is needed for the WNDR4700 as otherwise kmod-usb3 isn't available for 5.15. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel/x86: move x86' specific watchdogs to the x86 targetChristian Lamparter2022-05-071-65/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | upstream linux have these watchdogs locked behind X86. These will not build on other architectures. So move them to target/linux/x86/modules.mk drivers/watchdog/Kconfig: |config F71808E_WDT | tristate "Fintek F718xx, F818xx Super I/O Watchdog" | depends on X86 |[...] |config IT87_WDT | tristate "IT87 Watchdog Timer" | depends on X86 |[...] |config ITCO_WDT | tristate "Intel TCO Timer/Watchdog" | depends on (X86 || IA64) && PCI |[...] |config W83627HF_WDT | tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" | depends on X86 |[...] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: provide i6300esb for qemu/libvirtChristian Lamparter2022-05-071-0/+18
| | | | | | | | | | the Intel i6300esb is QEMU's default watchdog. And unlike the real "Intel i6300ESB I/O Controller hub" hardware, the i6300esb watchdog driver works on non-x86 targets like for ARM (armvirt 32bit) and potentially virtual PowerPC and MIPS targets (if there was any). Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-27 16:53:52 +0000