aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* kernel: other: limit serial-8250-exar to devices with PCI supportAleksander Jan Bajkowski2023-05-091-1/+1
| | | | | | | Kmod-serial-8250-exar supports Serial cards connected via PCIe bus. On targets without PCI support, this package is empty. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: i2c: limit i2c-designware-pci to devices with PCI supportAleksander Jan Bajkowski2023-05-091-1/+1
| | | | | | | | Kmod-i2c-designware-pci supports Synopsys I2C over PCIe bus. On targets without PCI support, this package is empty. Symbol CONFIG_I2C_DESIGNWARE_PCI depends on CONFIG_PCI. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* uboot-rockchip: add ROC-RK3328-CC supportTianling Shen2023-05-094-1/+280
| | | | | | | Add support for the Firefly ROC-RK3328-CC. Manually generated of-platdata files to avoid swig dependency. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* tfa-layerscape: Add ls1028ardb supportWojciech Dubowik2023-05-071-0/+14
| | | | | | Support TF-a for NXP LS1028ARDB reference board. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
* uboot-layerscape: Add ls1028ardb supportWojciech Dubowik2023-05-074-0/+39
| | | | | | | | | Support uboot for NXP LS1028ARDB reference board. GIC V3 has to be disabled in the uboot config to allow booting upstream kernels. This patch can be dropped once uboot is updated to 2022.04 version to nxp-qoriq github lf-6.1.1 branch. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
* uboot-layerscape: Don't fixup kaslr seed when no nodeWojciech Dubowik2023-05-071-0/+33
| | | | | | | | | | There seems to be a difference in firmware calling convention between upstream and NXP kernels. On some cpus like ls1028 it will hang on firmware secure get random when using LF uboot with upstream kernel. Instead of commenting it out, don't call get radnom seed when "kaslr-seed" is not present in device tree. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
* ls-rcw: Add ls1028ardb supportWojciech Dubowik2023-05-071-0/+4
| | | | | | Support RCW for NXP LS1028ARDB reference board. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
* ramips: add support for SNR-CPE-ME1Maximilian Weinmann2023-05-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | SNR-CPE-ME1 is a wireless WiFi 5 router manufactured by SNR/NAG company. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB - Flash : SPI-NOR 16 MiB (GD25Q128CSIG) - WLAN : 2.4 GHz (MediaTek MT7603EN) 5 GHz (MediaTek MT7610EN) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (in SoC) - USB : 3.0 x1 - UART : through-hole on PCB - [J4] 3.3V, RX, TX, GND (57600n8) - Power : 12 VDC, 2 A Flash instruction via TFTP: 1. Boot SNR-CPE-ME1 to recovery mode (hold the reset button while power on) 2. Send firmware via TFTP client: TFTP Server address: 192.168.1.1 TFTP Client address: 192.168.1.131 3. Wait ~120 seconds to complete flashing 4. Do sysupgrade using web-interface Signed-off-by: Maximilian Weinmann <x1@disroot.org>
* umbim: allow forcing DHCP/DHCPv6 configurationLech Perczak2023-05-071-8/+8
| | | | | | | | | | | To support the widest variety of modems, allow restoring previous behaviour of configuring the link throug means of DHCP(v6) exclusively. Change the default value of "dhcp" and "dhcpv6" UCI options to "auto", while keeping the default behaviour of "prefer out-of-band configuration", intact. Setting "dhcp" or "dhcpv6" to boolean 1 will now force using DHCP and DHCPv6, respectively. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* iproute2: update to 6.3.0Nick Hainke2023-05-071-2/+2
| | | | | | | Release Notes: https://lore.kernel.org/netdev/20230427090253.7a92616b@hermes.local/T/ Signed-off-by: Nick Hainke <vincent@systemli.org>
* mwlwifi: update to version 10.3.9.1-20230429Kabuli Chana2023-05-061-3/+3
| | | | | | resolve disconnect issue, upstream PR412 Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* mac80211: ath11k: sync with ath-nextRobert Marko2023-05-0616-130/+935
| | | | | | | | | Synchronize the ath11k backports with the current ath-next tree. This replaces the 160MHz with the upstreamed one, fixes 6GHz only WIPHY registration, allows SAR usage on WCN6750 and plenty of REO fixes. Signed-off-by: Robert Marko <robimarko@gmail.com>
* wireless-regdb: update to 2023.05.03Yuu Toriyama2023-05-041-2/+2
| | | | | | | | | | | Changes: 43f81b4 wireless-regdb: update regulatory database based on preceding changes 66f245d wireless-regdb: Update regulatory rules for Hong Kong (HK) e78c450 wireless-regdb: update regulatory rules for India (IN) 1647bb6 wireless-regdb: Update regulatory rules for Russia (RU). Remove DFS requirement. c076f21 Update regulatory info for Russia (RU) on 6GHz Signed-off-by: Yuu Toriyama <PascalCoffeeLake@gmail.com>
* gettext-full: bootstrap to local gnulib sourceMichael Pratt2023-05-042-344/+39
| | | | | | | | | | | | | | | | | Using the local gnulib source during autogen.sh allows for fine-grained control over the macros and source files for use with gettext but part of gnulib instead of gettext, without having to wait for a release or deal with gnulib as a git submodule. This is an alternative to running autoreconf. It also removes the need to patch macros in the case where there is a conflict between the source and our aclocal directory. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* gettext-full: link to local libxml2Michael Pratt2023-05-043-25/+35
| | | | | | | | | | | | | | | | | | | Some users have reported that gettext builds are attempting to link to libxml2 while it was supposed to be configured to use it's own built-in substitute. Configure gettext to require and link to our local libxml2 explicitly. Add a patch to revert upstream commit 87927a4e2 which forces libtextstyle to use the built-in libxml, no matter what the configuration is, making that option configurable again after the configure script is regenerated. Reported-by: Tianling Shen <cnsztl@immortalwrt.org> Signed-off-by: Michael Pratt <mcpratt@pm.me>
* gettext-full: set gperf as build prerequisiteMichael Pratt2023-05-041-0/+2
| | | | | | Require gperf to be built before gettext. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* libxml2: add from packages feedMichael Pratt2023-05-042-0/+218
| | | | | | | Add libxml2 which can be used to build gettext instead of the old built-in substitute for it. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* gperf: add from packages feedMichael Pratt2023-05-041-0/+36
| | | | | | | Add gperf which is required for building gettext after using the autogen.sh script. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* gettext-full: override SUBDIRS variable with MakefileMichael Pratt2023-05-042-23/+44
| | | | | | | | | | | | | | | | Instead of editing the SUBDIRS variable with a patch, it can be overriden at the end of the command line when invoking Make. This tool has a series of recursive Makefiles in each subdirectory, therefore SUBDIRS is set to a pattern of Make functions so that the result is variable depending on the current subdirectory that Make is being invoked in. Some of the subdirectories don't have a Makefile and are just storing files for another subdirectory Makefile target, therefore we have to place a fake Makefile that does nothing. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* uboot-mediatek: fixes build when nmbm enabledChukun Pan2023-05-021-3/+3
| | | | | | | | | | The image_header_t typedef has been removed from uboot v2023.01 [1], replaced with legacy struct. [1] https://github.com/u-boot/u-boot/commit/f3543e69442ca393e52df253d9c5d45bc189d471 Fixes: 3d5c542 ("uboot-mediatek: update to U-Boot 2023.01") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* uboot-mediatek: fix CONFIG_TEXT_BASE variableChukun Pan2023-05-027-12/+12
| | | | | | | | | | CONFIG_SYS_TEXT_BASE has been renamed to CONFIG_TEXT_BASE in uboot v2023.01 [1], fixes all this variable. [1] https://github.com/u-boot/u-boot/commit/984639039f4cfe32ec2cc531d6ace05326ac49eb Fixes: 3d5c5427 ("uboot-mediatek: update to U-Boot 2023.01") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* uboot-mediatek: remove duplicate config in mt7986Chukun Pan2023-05-022-14/+5
| | | | | | Some config was written twice by mistake, fix it. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* ramips: mt7621: add support for ZyXEL WSM20Andreas Böhler2023-04-291-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL WSM20 aka Multy M1 is a cheap mesh router system by ZyXEL based on the MT7621 CPU. Specifications ============== SoC: MediaTek MT7621AT (880MHz) RAM: 256MiB Flash: 128MiB NAND Wireless: 802.11ax (2x2 MT7915E DBDC) Ethernet: 4x 10/100/1000 (MT7530) Button: 1x WPS, 1x Reset, 1x LED On/Off LED: 7 LEDs (3x white, 2x red, 2x green) MAC address assignment ====================== The MAC address assignment follows stock: The label MAC address is the LAN MAC address, the WAN address is read from flash. The WiFi MAC addresses are set in userspace to label MAC + 1 and label MAC + 2. Installation (web interface) ============================ The device is cloud-managed, but there is a hidden local firmware upgrade page in the OEM web interface. The device has to be registered in the cloud in order to be able to access this page. The system has a dual firmware design, there is no way to tell which firmware is currently booted. Therefore, an -initramfs version is flashed first. 1. Log into the OEM web GUI 2. Access the hidden upgrade page by navigating to https://192.168.212.1/gui/#/main/debug/firmwareupgrade 3. Upload the -initramfs-kernel.bin file and flash it 4. Wait for OpenWrt to boot and log in via SSH 5. Transfer the sysupgrade file via SCP 6. Run sysupgrade to install the image 7. Reboot and enjoy NB: If the initramfs version was installed in RAS2, the sysupgrade script sets the boot number to the first partition. A backup has to be performed manually in case the OEM firwmare should be kept. Installation (UART method) ========================== The UART method is more difficult, as the boot loader does not have a timeout set. A semi-working stock firmware is required to configure it: 1. Attach UART 2. Boot the stock firmware until the message about failsafe mode appears 3. Enter failsafe mode by pressing "f" and "Enter" 4. Type "mount_root" 5. Run "fw_setenv bootmenu_delay 3" 6. Reboot, U-Boot now presents a menu 7. The -initramfs-kernel.bin image can be flashed using the menu 8. Run the regular sysupgrade for a permanent installation Changing the partition to boot is a bit cumbersome in U-Boot, as there is no menu to select it. It can only be checked using mstc_bootnum. To change it, issue the following commands in U-Boot: nand read 1800000 53c0000 800 mw.b 1800004 1 1 nand erase 53c0000 800 nand write 1800000 53c0000 800 This selects FW1. Replace "mw.b 1800004 1 1" by "mw.b 1800004 2 1" to change to the second slot. Back to stock ============= It is possible to flash back to stock, but a OEM firmware upgrade is required. ZyXEL does not provide the link on its website, but the link can be acquired from the OEM web GUI by analyzing the transferred JSON objects. It is then a matter of writing the firmware to Kernel2 and setting the boot partition to FW2: mtd write zyxel.bin Kernel2 echo -ne "\x02" | dd of=/dev/mtdblock7 count=1 bs=1 seek=4 conv=notrunc Signed-off-by: Andreas Böhler <dev@aboehler.at> Credits to forum users Annick and SirLouen for their initial work on this device
* umbim: include MBIM-provided DNS servers also with DHCP modeLech Perczak2023-04-291-15/+18
| | | | | | | | In MBIM interfaces, DNS servers may be provided out-of-band regardless whether DHCP is used for configuration, or not. Move the DNS configuration outside "if" blocks to support that. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: extract common code from static and dhcp(v6) setup procedureLech Perczak2023-04-291-34/+16
| | | | | | | Beginnings and endings of sub-interface creation procedure were literally duplicates - extract them outside if "if" blocks Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: handle MTU configurationLech Perczak2023-04-291-2/+16
| | | | | | | | | Allow setting interface MTU through UCI. If this is not set, use MBIM-provided MTU, if provided through control channel. If separate MTUs are provided for IPv4 and IPv6, apply larger of them. This is very unlikely and possible only for IPv4v6 dual-stack configuration. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: delegate RFC7278 IPv6 prefixes from OOB configLech Perczak2023-04-291-0/+6
| | | | | | | Delegate prefixes received through MBIM control channel the same way, as would be done through DHCP, according to RFC7278. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: drop IP configuration parsing using 'eval'Lech Perczak2023-04-291-1/+0
| | | | | | Finally, when new helper is in use, drop old IP configuration parser. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: support multiple-valued configuration fieldsLech Perczak2023-04-291-10/+32
| | | | | | | | | MBIM supports multiple values for IP address and DNS server, and such configuration is available through output of MBIM. Use new helper method to support adding multiple addresses and DNS servers to static interfaces for both IPv4 and IPv6. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: add "_proto_mbim_get_field" helperLech Perczak2023-04-291-0/+12
| | | | | | | | | Add a new helper to extract IP configuration from umbim output. This is required to extract fields which can possibly have multiple values, namely IP addresses and DNS servers, and get rid of primitive parser using 'eval' builtin without support for this. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: log output of 'config' stepLech Perczak2023-04-291-1/+3
| | | | | | | | Display full configuration obtained using MBIM control channel in the log, from umbim output verbatim, for easier troubleshooting, and in preparation for parser refactoring. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: pass ipXtable to child interfacesLech Perczak2023-04-291-2/+8
| | | | | | | | Inspired by commti e51aa699f7ca, allow setting specific routing tables via ip4table and ip6table options, by passing them on child interfaces created by MBIM protocol handler. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: respect 'Enable IPv6 negotiation' optionLech Perczak2023-04-291-0/+4
| | | | | | | Don't bring IPv6 part of interface up if it's disabled, or system does not support it. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: use static config by default, fallback to DHCPLech Perczak2023-04-291-4/+7
| | | | | | | | | Finally, inspired by ModemManager's logic, make static configuration obtained through MBIM control channel, preferred. If IP configuration is not available this way, fallback to DHCP(v6) if enabled, else do not create a sub-interface for unavailable IP type. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: separate DHCPv6 configuration from DHCP(v4)Lech Perczak2023-04-291-3/+4
| | | | | | | | | | Now, that sub-interface setup is split by IP type, and separate checks are performed for DHCP selection, it is possible to control DHCP on v4 an v6 sub-interfaces instantly. Add "dhcpv6" variable, akin to QMI option, to control behaviour of DHCPv6 separately from IPv4 option, which is required for some mobile operators. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: restructure IPv4/IPv6 handlingLech Perczak2023-04-291-29/+25
| | | | | | | | Check whether interface is configured per IP type, not per DHCP. This is preparation to allow fallback to DHCP if static IP configuration is not available, which is the default option for MBIM modems Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: inherit firewall zone membership from parent interfaceLech Perczak2023-04-291-0/+6
| | | | | | | | Fix an issue where subinterfaces were not added to the same firewall zone as their parent. Inspired by 64bb88841fb. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: inherit "peerdns" option from parent interfaceLech Perczak2023-04-291-2/+2
| | | | | | | | MBIM protocol handler should intherit "peerdns" options from parent interface on sub-interfaces, otherwise upstream DNS servers are applied regardless of configuration. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: use IP configuration provided by MBIM by defaultLech Perczak2023-04-291-1/+1
| | | | | | | | | | | | Previously, DHCP was used. According to MBIM Specification v1.0 errata 1 [1], section 10.5.20, MBIM_CID_IP_CONFIGURATION, if MBIM information element containing IP configuration is available, host shall use it, and fall back to in-band mechanisms to acquire it therwise - therefore make static configuration the default. [1] https://www.usb.org/document-library/mobile-broadband-interface-model-v10-errata-1-and-adopters-agreement Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: detect actual connection IP typeLech Perczak2023-04-291-4/+10
| | | | | | | | | | | | Current implementation needlessly creates both IPv4 and IPv6 sub-interfaces for single-stack IP types. Limit this only to selected IP type. While at that, ensure that IP type is also passed to umbim during "connect" phase. In addition, detect the actual established connection type returned by umbim and set up subinterfaces according to that, not to requested configuration. While at that, allow empty IP type explicitly, interpreted as "any" according to MBIM specification. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: fail connect step immediatelyLech Perczak2023-04-291-3/+6
| | | | | | | | | | | | | Subsequent calls to 'umbim connect' do not have any effect if a failure occured, and in such case an infinite loop without timeout is created, leading to possibility of interface stuck at connecting forever. Drop this loop, and issue MBIM disconnect properly, so netifd can restart from scratch. This issue can be observed with Sierra EM7455 at changing APN, which causes network re-registration by default, and a MBIM transaction timeout, which is resolved on next interface bringup by netifd. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: connect session for only the selected PDP typeLech Perczak2023-04-291-48/+60
| | | | | | | | | Previous implementation automatically set up connections for both IPv4 and IPv6, even if one of them isn't supported. Respect the "pdptype" option in the same way, as it is done for QMI or NCM, and only start the respective PDN sessions, if set. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: add support for non-dhcp modeMartin Schiller2023-04-291-22/+64
| | | | | | | | | | There are mbim compatible wwan modules available which do not support the dhcp autoconfiguration. (e.g. gemalto Cinterion ELS81) This adds the possibility to get the configuration parameters from mbim. Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* openssl: fix low-severity CVE-2023-1255Eneas U de Queiroz2023-04-292-1/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This applies commit 02ac9c94 to fix this OpenSSL Security Advisory issued on 20th April 2023[1]: Input buffer over-read in AES-XTS implementation on 64 bit ARM (CVE-2023-1255) ============================================================== Severity: Low Issue summary: The AES-XTS cipher decryption implementation for 64 bit ARM platform contains a bug that could cause it to read past the input buffer, leading to a crash. Impact summary: Applications that use the AES-XTS algorithm on the 64 bit ARM platform can crash in rare circumstances. The AES-XTS algorithm is usually used for disk encryption. The AES-XTS cipher decryption implementation for 64 bit ARM platform will read past the end of the ciphertext buffer if the ciphertext size is 4 mod 5 in 16 byte blocks, e.g. 144 bytes or 1024 bytes. If the memory after the ciphertext buffer is unmapped, this will trigger a crash which results in a denial of service. If an attacker can control the size and location of the ciphertext buffer being decrypted by an application using AES-XTS on 64 bit ARM, the application is affected. This is fairly unlikely making this issue a Low severity one. 1. https://www.openssl.org/news/secadv/20230420.txt Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* kernel: crypto: crypto-rng: select SHA512 for >= 5.14.0Glen Huang2023-04-291-1/+3
| | | | | | | drbg swtiched to use HMAC(SHA-512) since 5.14.0 https://github.com/torvalds/linux/commit/5261cdf457ce3635bf18d393a3c1991dcfaf9d02 Signed-off-by: Glen Huang <me@glenhuang.com>
* broadcom-sprom: update to latest versionÁlvaro Fernández Rojas2023-04-271-3/+3
| | | | | | | Replaces SPROMs with the ones from bmips fixups to prevent errors such as: https://github.com/openwrt/openwrt/pull/11474#issuecomment-1524235591 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* busybox: turn on BUSYBOX_DEFAULT_ASH_RANDOM_SUPPORT for having $RANDOMIlario Gelmetti2023-04-251-1/+1
| | | | | | $RANDOM shell variable is a convenient way for getting a random number from 0 to 32767 Signed-off-by: Ilario Gelmetti <iochesonome@gmail.com>
* busybox: Activate resize tool by defaultHauke Mehrtens2023-04-251-1/+1
| | | | | | | | | | | The resize tool will resize the prompt to match the current terminal size. This is helpful when connecting to the system using UART to make the vi or top output match the current terminal size. This increases the busybox binary size by 136 bytes and the ipkg size by 335 bytes on aarch64. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: add support for Alcatel HH40VAndreas Böhler2023-04-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Alcatel HH40V is a CAT4 LTE router used by various ISPs. Specifications ============== SoC: QCA9531 650MHz RAM: 128MiB Flash: 32MiB SPI NOR LAN: 1x 10/100MBit WAN: 1x 10/100MBit LTE: MDM9607 USB 2.0 (rndis configuration) WiFi: 802.11n (SoC integrated) MAC address assignment ====================== There are three MAC addresses stored in the flash ROM, the assignment follows stock. The MAC on the label is the WiFi MAC address. Installation (TFTP) =================== 1. Connect serial console 2. Configure static IP to 192.168.1.112 3. Put OpenWrt factory.bin file as firmware-system.bin 4. Press Power + WPS and plug in power 5. Keep buttons pressed until TFTP requests are visible 6. Wait for the system to finish flashing and wait for reboot 7. Bootup will fail as the kernel offset is wrong 8. Run "setenv bootcmd bootm 0x9f150000" 9. Reset board and enjoy OpenWrt Installation (without UART) =========================== Installation without UART is a bit tricky and requires several steps too long for the commit message. Basic steps: 1. Create configure backup 2. Patch backup file to enable SSH 3. Login via SSH and configure the new bootcmd 3. Flash OpenWrt factory.bin image manually (sysupgrade doesn't work) More detailed instructions will be provided on the Wiki page. Tested by: Christian Heuff <christian@heuff.at> Signed-off-by: Andreas Böhler <dev@aboehler.at>
* hostapd: update to 2023-03-29Nick Hainke2023-04-2254-587/+504
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add patches: - 170-wpa_supplicant-fix-compiling-without-IEEE8021X_EAPOL.patch Remove upstreamed: - 170-DPP-fix-memleak-of-intro.peer_key.patch - 461-driver_nl80211-use-new-parameters-during-ibss-join.patch - 800-acs-don-t-select-indoor-channel-on-outdoor-operation.patch - 992-openssl-include-rsa.patch Automatically refreshed: - 011-mesh-use-deterministic-channel-on-channel-switch.patch - 021-fix-sta-add-after-previous-connection.patch - 022-hostapd-fix-use-of-uninitialized-stack-variables.patch - 030-driver_nl80211-rewrite-neigh-code-to-not-depend-on-l.patch - 040-mesh-allow-processing-authentication-frames-in-block.patch - 050-build_fix.patch - 110-mbedtls-TLS-crypto-option-initial-port.patch - 120-mbedtls-fips186_2_prf.patch - 140-tests-Makefile-make-run-tests-with-CONFIG_TLS.patch - 150-add-NULL-checks-encountered-during-tests-hwsim.patch - 160-dpp_pkex-EC-point-mul-w-value-prime.patch - 200-multicall.patch - 300-noscan.patch - 310-rescan_immediately.patch - 330-nl80211_fix_set_freq.patch - 341-mesh-ctrl-iface-channel-switch.patch - 360-ctrl_iface_reload.patch - 381-hostapd_cli_UNKNOWN-COMMAND.patch - 390-wpa_ie_cap_workaround.patch - 410-limit_debug_messages.patch - 420-indicate-features.patch - 430-hostapd_cli_ifdef.patch - 450-scan_wait.patch - 460-wpa_supplicant-add-new-config-params-to-be-used-with.patch - 463-add-mcast_rate-to-11s.patch - 465-hostapd-config-support-random-BSS-color.patch - 500-lto-jobserver-support.patch - 590-rrm-wnm-statistics.patch - 710-vlan_no_bridge.patch - 720-iface_max_num_sta.patch - 730-ft_iface.patch - 750-qos_map_set_without_interworking.patch - 751-qos_map_ignore_when_unsupported.patch - 760-dynamic_own_ip.patch - 761-shared_das_port.patch - 990-ctrl-make-WNM_AP-functions-dependant-on-CONFIG_AP.patch Manually refresh: - 010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch - 301-mesh-noscan.patch - 340-reload_freq_change.patch - 350-nl80211_del_beacon_bss.patch - 370-ap_sta_support.patch - 380-disable_ctrl_iface_mib.patch - 464-fix-mesh-obss-check.patch - 470-survey_data_fallback.patch - 600-ubus_support.patch - 700-wifi-reload.patch - 711-wds_bridge_force.patch - 740-snoop_iface.patch Tested-by: Packet Please <pktpls@systemli.org> [Fritzbox 4040 (ipq40xx), EAP225-Outdoor (ath79); 802.11s, WPA3 OWE, and WPA3 PSK] Tested-by: Andrew Sim <andrewsimz@gmail.com> [mediatek/filogic] Signed-off-by: Nick Hainke <vincent@systemli.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-09 14:51:47 +0000