aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* libnl-tiny: update to latest Git HEADJo-Philipp Wich2023-07-271-6/+6
| | | | | | | | | | | | 8667347 build: allow passing SOVERSION value for dynamic library Also adjust packaging of the library to only ship the SOVERSION suffixed library object, to allow for concurrent installation of ABI-incompible versions in the future. Fixes: #13082 Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 4af0a72a65d7c92ed4e7c2455090f695f424903d)
* dropbear: add ed25519 for failsafe keyEtienne Champetier2023-07-261-2/+3
| | | | | | | | | | | | At least Fedora and RHEL 9 set RSAMinSize=2048, so when trying to use failsafe, we get 'Bad server host key: Invalid key length' To workaround the issue, we can use: ssh -o RSAMinSize=1024 ... Generating 2048 bits RSA is extremely slow, so add ed25519. We keep RSA 1024 to be as compatible as possible. Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com> (cherry picked from commit 6ac61dead99ff6b9df00c29b7a858772449718b2)
* ath11k-firmware: update to stable WLAN.HK.2.9.0.1-01837Michał Kwiatek2023-07-261-5/+5
| | | | | | | | | | | | | | Changelog from quic: Bug fixes, stability improvements from previous releases are present. There are no backward comatibility issues with this release. Tested-by: Michał Kwiatek <michal@kwiatek.it> # Xiaomi AX3600 Signed-off-by: Michał Kwiatek <michal@kwiatek.it> [ improve commit description ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 1c56801dd2e696cac7da45912b5e3ea1165549d5)
* layerscape: remove Traverse LS1043 boardsMathew McBride2023-07-261-4/+0
| | | | | | | | | | | | | | | | | The Traverse LS1043 boards were not publicly released, all the production has been going to OEM customers who do not use the image format defined in the OpenWrt tree. Only a few samples were circulated outside Traverse and our OEM customers. The public release (then called Five64) of this series was cancelled in favour of our LS1088A based design (Ten64). It is best to remove these boards to avoid wasting OpenWrt project and contributor resources. Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit 8e7ba6fbae80838c2219ee38307af9c883606c2c)
* layerscape: armv8_64b: add Traverse Ten64 NAND variantMathew McBride2023-07-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Ten64 board[1] is based around NXP's Layerscape LS1088A SoC. It is capable of booting both standard Linux distributions from disk devices, using EFI, and booting OpenWrt from NAND. See the online manual for more information, including the flash layout[2]. This patchset adds support for generating Ten64 images for NAND boot. For disk boot, one can use the EFI support that was recently added to the armvirt target. We previously supported NAND users by building inside our armvirt/EFI target[3], but this approach is not suitable for OpenWrt upstream. Users who used our supplied NAND images will be able to upgrade to this via sysupgrade. Signed-off-by: Mathew McBride <matt@traverse.com.au> [1] - https://www.traverse.com.au/hardware/ten64 [2] - https://ten64doc.traverse.com.au/hardware/flash/ [3] - Example: https://gitlab.com/traversetech/ls1088firmware/openwrt/-/commit/285e4360e1604eb466880d245d48efd9962143a5 (cherry picked from commit af0546da3440dba24217949527e503820350ff05)
* uqmi: do not start 464xlat for dual-stack configurationsLech Perczak2023-07-261-0/+1
| | | | | | | | | If dual-stack configuration is in use, and dhcpv6 option is set, do not start 464xlat sub-interface for dhcpv6 sub-interace , as the configuration already provides IPv4 connectivty, be it through single or dual APN configuration. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit a9237c1af9c2eee0a49d96f2588be85d24489f20)
* uqmi: support split-APN IPv4 and IPv6 dual-stackLech Perczak2023-07-261-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add two new "v6apn" and "v6profile" properties, to support split-APN dual-stack onfiguration. This extends the existing ipv4v6 PDP type, allowing simultaneous connection to two distinct APNs, one for IPv4 and one for IPv6. The parameters override existing 'apn' and 'profile' respectively, if set, but only for IPv6 part of the connection. If unset, they default to their original values, constituting a standard IPv4v6 setup. If a different APN is set for IPv6, a corresponding profile MUST also be configured, with a different ID, than the IPv4 profile, for example, profile 2. Both APNs must match ones configured through QMI or through 'AT+CGDCONT' command. Example configuration in UCI: config interface 'wan' option proto 'qmi' option device '/dev/cdc-wdm0' option autoconnect '1' option pdptype 'ipv4v6' option apn 'internet' option v6apn 'internetipv6' option profile '1' option v6profile '2' Corresponding profile configuration: AT+CGDCONT? +CGDCONT: 1,"IP","internet","0.0.0.0",0,0,0,0 +CGDCONT: 2,"IPV6","internetipv6","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0 Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit 48e8bf1b8f3d2750f215765f583c847ff02deca2)
* mac80211: partly revert force-mac80211 loss detectionDavid Bauer2023-07-263-36/+56
| | | | | | | | | | | | This patch will only force mac80211 loss detection upon ath10k by masking the driver-specific loss-detection bit. Ref: commit ed816f6ba8b5 ("mac80211: always use mac80211 loss detection") Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit d9070f8d23621931c4869980f6e5ae17abbe3e58) [felix.bau@gmx.de: replace path 6.2 with 5.15, refresh patches] Signed-off-by: Felix Baumann <felix.bau@gmx.de>
* mt76: update to the latest versionFelix Fietkau2023-07-261-3/+3
| | | | | | | | | | | 53edfc7aaa34 wifi: mt76: mt7603: fix beacon interval after disabling a single vif 7ef4dd12d982 wifi: mt76: mt7603: fix tx filter/flush function 152608a40aa7 wifi: mt76: mt7615: do not advertise 5 GHz on first phy of MT7615D (DBDC) cacac3902a63 wifi: mt76: split get_of_eeprom in subfunction cd3dfe392769 wifi: mt76: add support for providing eeprom in nvmem cells Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 4395236a100b558d96d0e836ddc76df19b33ddfb)
* mt76: update to the latest versionFelix Fietkau2023-07-261-3/+3
| | | | | | | bb3937d5c3e0 wifi: mt76: mt7915: remove VHT160 capability on MT7915 Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 063641f8cf7990731919b950c1bf9eb15d1e74c9)
* mediatek: add support for ZyXEL NWA50AX ProDavid Bauer2023-07-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Mediatek MT7981 RAM: 512M DDR4 FLASH: 256M NAND ETH: MaxLinear GPY211 (2.5GbE N Base-T) WiFi: Mediatek MT7981 (2.4GHz 2T2R:2 5GHz 3T3R:2 802.11ax) BTN: 1x Reset LED: 1x Multi-Color UART Console ------------ Available below the rubber cover next to the ethernet port. Settings: 115200 8N1 Layout: <12V> <LAN> GND-RX-TX-VCC Logic-Level is 3V3. Don't connect VCC to your UART adapter! Installation Web-UI ------------------- Upload the Factory image using the devices Web-Interface. As the device uses a dual-image partition layout, OpenWrt can only installed on Slot A. This requires the current active image prior flashing the device to be on Slot B. In case this is not the case, OpenWrt will boot only one time, returning to the ZyXEL firmware the second boot. If this happens, first install a ZyXEL firmware upgrade of any version and install OpenWrt after that. Installation TFTP / Recovery ---------------------------- This installation routine is especially useful in case of a bricked device. Attach to the UART console header of the device. Interrupt the boot procedure by pressing Enter. The bootloader has a reduced command-set available from CLI, but more commands can be executed by abusing the atns command. Boot a OpenWrt initramfs image available on a TFTP server at 192.168.1.66. Rename the image to nwa50axpro-openwrt-initramfs.bin. $ atnf nwa50axpro-openwrt-initramfs.bin $ atna 192.168.1.88 $ atns "192.168.1.66; tftpboot; setenv fdt_high 0xffffffffffffffff; bootm" Upon booting, set the booted image to the correct slot: $ zyxel-bootconfig /dev/mtd9 get-status $ zyxel-bootconfig /dev/mtd9 set-image-status 0 valid $ zyxel-bootconfig /dev/mtd9 set-active-image 0 Copy the OpenWrt sysupgrade image to the device using scp. Write the sysupgrade image to NAND using sysupgrade. $ sysupgrade -n image.bin Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit f0445746f6fd96fc7c5394b238153bd2ff22bc5b)
* libbpf: Update to v1.2.2Tony Ambardar2023-07-201-3/+3
| | | | | | | | Update to the latest upstream release to include recent bugfixes: Link: https://github.com/libbpf/libbpf/compare/v1.2.0...v1.2.2 Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit 1d5e7b85ccc58f3d010a54e82ccea81fc102262b)
* nftables: update to 1.0.8Nick Hainke2023-07-201-2/+2
| | | | | | | | ChangeLog: https://www.netfilter.org/projects/nftables/files/changes-nftables-1.0.8.txt Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 58c498247b3d06c0ff1967d2f48ba84084a6cf25)
* libnftnl: update to 1.2.6Nick Hainke2023-07-201-3/+3
| | | | | | | | Release Notes: https://lists.netfilter.org/pipermail/netfilter-announce/2023/000250.html Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit e57a752217113d066cdea2073f35e8c7c1fafaa6)
* hostapd: update to 2023-06-22Andre Heider2023-07-2032-202/+162
| | | | | | | | | | | | | | | Removed, merged upstream: - 170-wpa_supplicant-fix-compiling-without-IEEE8021X_EAPOL.patch Manually refreshed: - 040-mesh-allow-processing-authentication-frames-in-block.patch - 600-ubus_support.patch - 761-shared_das_port.patch Fixes: #12661 Fixes: 304423a4 ("hostapd: update to 2023-03-29") Signed-off-by: Andre Heider <a.heider@gmail.com> (cherry picked from commit cd804c1ebb34c9740f8ad9fe393a81f3efb7b009)
* linux-firmware: update to 20230625John Audia2023-07-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change from git log --oneline: ee91452d (tag: 20230625) Makefile, copy-firmware: support xz/zstd compressed firmware ad2ce8be copy-firmware: silence the last shellcheck warnings 67bf50e7 copy-firmware: drop obsolete backticks, quote 77f31a80 copy-firmware: tweak sed invocation 40fa2b20 copy-firmware: quote deskdir and dirname 77f92e0b check_whence: error if symlinks are in-tree f2671b1f check_whence: error if File: is actually a link 4b539e7a check_whence: strip quotation marks 32693d3b linux-firmware: wilc1000: update WILC1000 firmware to v16.0 109b23c5 ice: update ice DDP wireless_edge package to 1.3.10.0 ade163aa amdgpu: DMCUB updates for DCN 3.1.4 and 3.1.5 045b2136 amdgpu: update DMCUB to v0.0.172.0 for various AMDGPU ASICs 5a1842ce Merge branch 'rb3-update' of https://github.com/lumag/linux-firmware 2f81bd9f fix broken cirrus firmware symlinks 01a7a844 qcom: Update the microcode files for Adreno a630 GPUs. 94120467 qcom: sdm845: rename the modem firmware 1c599488 qcom: sdm845: update remoteproc firmware 1cd1c871 rtl_bt: Update RTL8852A BT USB firmware to 0xDAC7_480D 55e74485 rtl_bt: Update RTL8852C BT USB firmware to 0x040D_7225 9dbd8ec2 amdgpu: DMCUB updates for various AMDGPU asics 9a47adc7 Merge branch 'mtl_huc_v8.5.0' of git://anongit.freedesktop.org/drm/drm-firmware eb3ae841 linux-firmware: update firmware for MT7922 WiFi device 5ce06b9e linux-firmware: update firmware for MT7921 WiFi device 2c50361c linux-firmware: update firmware for mediatek bluetooth chip (MT7922) 185f49df linux-firmware: update firmware for mediatek bluetooth chip (MT7921) 05f94af7 Merge branch 'v2.0.21478' of https://github.com/yunfei-mtk/linux_fw_scp 5de33fb4 i915: Add HuC v8.5.0 for MTL 795aea91 mediatek: Update mt8195 SCP firmware to support hevc fc90c59b Merge branch 'db410c' of https://github.com/lumag/linux-firmware 9d4c9a52 qcom: apq8016: add Dragonboard 410c WiFi and modem firmware 1f9667eb Merge branch 'for-upstream' of http://git.chelsio.net/pub/git/linux-firmware b544e2b0 Merge branch 'for-upstream' of https://github.com/CirrusLogic/linux-firmware 244d6b5c cirrus: Add firmware for new Asus ROG Laptops d11ae984 brcm: Add symlinks from Pine64 devices to AW-CM256SM.txt 1c513ec7 amdgpu: Update GC 11.0.1 and 11.0.4 8449fcd0 Merge https://github.com/pkshih/linux-firmware c10facaf rtw89: 8851b: add firmware v0.29.41.0 1ba3519e Merge branch 'dev-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/firmware 2e775450 amdgpu: update yellow carp firmware for amd.5.5 release 5eccb3c1 amdgpu: update navi14 firmware for amd.5.5 release c70d3c3b amdgpu: update navi12 firmware for amd.5.5 release 0e4f17cc amdgpu: update vega20 firmware for amd.5.5 release 413348f3 amdgpu: update vega12 firmware for amd.5.5 release c167587d amdgpu: update navi10 firmware for amd.5.5 release 3c98630a amdgpu: update vega10 firmware for amd.5.5 release d13ef0cb amdgpu: update PSP 13.0.11 firmware for amd.5.5 release 31f8f526 amdgpu: update GC 11.0.4 firmware for amd.5.5 release f0ce7026 amdgpu: update SDMA 6.0.1 firmware for amd.5.5 release 47424464 amdgpu: update PSP 13.0.4 firmware for amd.5.5 release 60dc78a7 amdgpu: update GC 11.0.1 firmware for amd.5.5 release ba70041c amdgpu: update 13.0.8 firmware for amd.5.5 release 9c48881f amdgpu: update GC 10.3.7 firmware for amd.5.5 release bb4d7250 amdgpu: update vangogh firmware for amd.5.5 release 102a4138 amdgpu: update VCN 4.0.4 firmware for amd.5.5 release a7fe4aa1 amdgpu: update SMU 13.0.7 firmware for amd.5.5 release 80b2d561 amdgpu: update PSP 13.0.7 firmware for amd.5.5 release a5d7b4df amdgpu: update GC 11.0.2 firmware for amd.5.5 release c1db00c5 amdgpu: update renoir firmware for amd.5.5 release 683c91f7 amdgpu: update VCN 4.0.0 firmware for amd.5.5 release 39d6fcc7 amdgpu: update SMU 13.0.0 firmware for amd.5.5 release 56832557 amdgpu: update PSP 13.0.0 firmware for amd.5.5 release ffe1a41e amdgpu: update GC 11.0.0 firmware for amd.5.5 release 72d525d7 amdgpu: update green sardine firmware for amd.5.5 release ceba765d amdgpu: update beige goby firmware for amd.5.5 release 95eb53c9 amdgpu: update dimgrey cavefish firmware for amd.5.5 release 909cef98 amdgpu: update arcturus firmware for amd.5.5 release 91251d16 amdgpu: update vcn 3.1.2 firmware for amd.5.5 release 9eaff866 amdgpu: update psp 13.0.5 firmware for amd.5.5 release 44772528 amdgpu: update GC 10.3.6 firmware for amd.5.5 release 3bffc9f8 amdgpu: update navy flounder firmware for amd.5.5 release 3b920773 amdgpu: update sienna cichlid firmware for amd.5.5 release 84d5550e amdgpu: update aldebaran firmware for amd.5.5 release dcd30473 amdgpu: DMCUB updates for various AMDGPU asics c9e4034a ice: update ice DDP comms package to 1.3.40.0 601c1813 Merge https://github.com/pkshih/linux-firmware 08b854f0 rtlwifi: Add firmware v6.0 for RTL8192FU b72c69dd rtlwifi: Update firmware for RTL8188EU to v28.0 51290942 (tag: 20230515) Merge branch 'main' of https://github.com/CirrusLogic/linux-firmware Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit a5005508f069c9bd0c1d33970e9b3ecbe5040380)
* uboot-mediatek: support classic uImage.FIT with internal images in imszbDaniel Golle2023-07-131-4/+3
| | | | | | | | | The side-effect and main motivation is to also drop the FIT structure size limit because with multiple device tree overlays it may easily grow beyond the previous 4kB limit in the future. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 98e3f82c3fb729c1d9de78fef215322528b50cb4)
* uboot-mediatek: add H3C Magic NX30 Pro supportChukun Pan2023-07-133-0/+454
| | | | | | | | The OEM uboot limit brush into 3rd-party firmware. So add a custom uboot build to support openwrt. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (cherry picked from commit 437e79ad6d01100afac9786d287976de6d5cf363)
* mediatek: add support for Netgear EX6250v2 seriesWenli Looi2023-07-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netgear EX6250v2, EX6400v3, EX6410v2, EX6470 are wall-plug 802.11ac (Wi-Fi 5) extenders. Like other MT7629 devices, Wi-Fi does not work currently as there is no driver. Related: https://github.com/openwrt/openwrt/pull/5084 For future reference, 2.4GHz MAC = LAN+1, 5GHz MAC = LAN+2. Specifications: * MT7629, 256 MiB RAM, 16 MiB SPI NOR * MT7761N (2.4GHz) / MT7762N (5GHz) - no driver * Ethernet: 1 port 10/100/1000 * UART: 115200 baud (labeled on board) Installation: * Flash the factory image through the stock web interface, or TFTP to the bootloader. NMRP can be used to TFTP without opening the case. * After installation, perform a factory reset. Wait for the device to boot, then hold the reset button for 10 seconds. This is needed because sysupgrade in the stock firmware will attempt to preserve its configuration using sysupgrade.tgz. See https://github.com/openwrt/openwrt/pull/4182 Revert to stock firmware: * Flash the stock firmware to the bootloader using TFTP/NMRP. Signed-off-by: Wenli Looi <wlooi@ucalgary.ca> (cherry picked from commit 73de41898fcd06d837b013449c370c493bcdc595)
* wolfssl: update to 5.6.3Nick Hainke2023-07-083-6/+31
| | | | | | | | | | | | | | | | Release Notes: - https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.0-stable - https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.2-stable - https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.3-stable Refresh patch: - 100-disable-hardening-check.patch Backport patch: - 001-fix-detection-of-cut-tool-in-configure.ac.patch Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 0e83b5e6cc8e2970905a2b32c990fa7491ff733c)
* mxs: rework image generationZoltan HERPAI2023-07-061-3/+9
| | | | | | | | Migrate to "new" image generation method. Device profiles will be generated based on image/Makefile instead of profiles/ , which will also allow to automatically build images for all supported devices via buildbot. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ipq-wifi: fix upstream board-2.bin ZTE M289F snafuChristian Lamparter2023-07-041-1/+3
| | | | | | | | | | | | | | | | | | | | | The upstream board-2.bin file in the linux-firmware.git repository for the QCA4019 contains a packed board-2.bin for this device for both 2.4G and 5G wifis. This isn't something that the ath10k driver supports. Until this feature either gets implemented - which is very unlikely -, or the upstream boardfile is mended (both, the original submitter and ath10k-firmware custodian have been notified). OpenWrt will go back and use its own bespoke boardfile. This unfortunately means that 2.4G and on some revisions the 5G WiFi is not available in the initramfs image for this device. Fixes: #12886 Reported-by: Christian Heuff <christian@heuff.at> Debugged-by: Georgios Kourachanis <geo.kourachanis@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 75505c5ec724b9b961dcb411bac1d4b9aede3e1d)
* mt76: update to the latest versionFelix Fietkau2023-07-041-3/+3
| | | | | | | f704e4f83c6f mt76: mt7915: fix copy&paste issue on capability check rework Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 816933bee6e6b68156f6aeea083117208bf859f8)
* libnl-tiny: update to latest git HEADHauke Mehrtens2023-07-021-3/+3
| | | | | | | d433990 Make struct nla_policy and struct nlattr const Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 513bcfdf78d7ffbcf244da2e6910a3d04b17ae01)
* linux-firmware: ibt-firmware: install sfi/ddc files for AX210 cardMathew McBride2023-07-022-1/+3
| | | | | | | | | | | | | | | | | | | When using an Intel AX210 card, the Bluetooth hci interface failed to start due to a missing "ibt-0041-0041.sfi" file. Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-0041-0041.sfi (-2) A device specific configuration file (DDC) is also required: Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi Bluetooth: hci0: Waiting for firmware download to complete ... Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0041-0041.ddc Bluetooth: hci0: Applying Intel DDC parameters completed Bluetooth: hci0: Firmware timestamp 2023.13 buildtype 1 build 62562 Fixes: #8558 Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit fff6833d4c01205156f9431a111a51f96642b476)
* ramips: add support for Sercomm S1500 devicesMikhail Zhilkin2023-07-021-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for following wireless routers: - Beeline SmartBox PRO (Serсomm S1500 AWI) - WiFire S1500.NBN (Serсomm S1500 BUC) This commit is based on this PR: - Link: https://github.com/openwrt/openwrt/pull/4770 - Author: Maximilian Weinmann <x1@disroot.org> The opening of this PR was agreed with author. My changes: - Sorting, minor changes and some movings between dts and dtsi - Move leds to dts when possible - Recipes for the factory image - Update of the installation/recovery/return to stock guides - Add reset GPIO for the pcie1 Common specification -------------------- SoC: MediaTek MT7621AT (880 MHz, 2 cores) Switch: MediaTek MT7530 (via SoC MT7621AT) Wireless: 2.4 GHz, MT7602EN, b/g/n, 2x2 Wireless: 5 GHz, MT7612EN, a/n/ac, 2x2 Ethernet: 5 ports - 5×GbE (WAN, LAN1-4) Mini PCIe: via J2 on PCB, not soldered on the board UART: J4 -> GND[], TX, VCC(3.3V), RX BootLoader: U-Boot SerComm/Mediatek Beeline SmartBox PRO specification ---------------------------------- RAM (Nanya NT5CB128M16FP): 256 MiB NAND-Flash (ESMT F59L2G81A): 256 MiB USB ports: 2xUSB2.0 LEDs: Status (white), WPS (blue), 2g (white), 5g (white) + 10 LED Ethernet Buttons: 2 button (reset, wps), 1 switch button (ROUT<->REP) Power: 12 VDC, 1.5 A PCB Sticker: 970AWI0QW00N256SMT Ver. 1.0 CSN: SG15******** MAC LAN: 94:4A:0C:**:**:** Manufacturer's code: 0AWI0500QW1 WiFire S1500.NBN specification ------------------------------ RAM (Nanya NT5CC64M16GP): 128 MiB NAND-Flash (ESMT F59L1G81MA): 128 MiB USB ports: 1xUSB2.0 LEDs: Status (white), WPS (white), 2g (white), 5g (white) + 10 LED Ethernet Buttons: 2 button (RESET, WPS) Power: 12 VDC, 1.0 A PCB Sticker: 970BUC0RW00N128SMT Ver. 1.0 CSN: MH16******** MAC WAN: E0:60:66:**:**:** Manufacturer's code: 0BUC0500RW1 MAC address table (PRO) ----------------------- use address source LAN *:23 factory 0x1000 (label) WAN *:24 factory $label +1 2g *:23 factory $label 5g *:25 factory $label +2 MAC addresses (NBN) ------------------- use address source LAN *:0e factory 0x1000 WAN *:0f LAN +1 (label) 2g *:0f LAN +1 5g *:10 LAN +2 OEM easy installation --------------------- 1. Remove all dots from the factory image filename (except the dot before file extension) 2. Upload and update the firmware via the original web interface 3. Two options are possible after the reboot: a. OpenWrt - that's OK, the mission accomplished b. Stock firmware - install Stock firmware (to switch booflag from Sercomm0 to Sercomm1) and then OpenWrt factory image. Return to Stock --------------- 1. Change the bootflag to Sercomm1 in OpenWrt CLI and then reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock2 reboot 2. Install stock firmware via the web OEM firmware interface Recovery -------- Use sercomm-recovery tool. Link: https://github.com/danitool/sercomm-recovery Tested-by: Pavel Ivanov <pi635v@gmail.com> Tested-by: Denis Myshaev <denis.myshaev@gmail.com> Tested-by: Oleg Galeev <olegingaleev@gmail.com> Tested-By: Ivan Pavlov <AuthorReflex@gmail.com> Co-authored-by: Maximilian Weinmann <x1@disroot.org> Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> (cherry picked from commit 2d6784a033a994043759fa3b94c48afd5df81f88)
* mt76: fix download hashFelix Fietkau2023-07-021-1/+1
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit a3e173e00e7a7f647528ec04be432bccfb5995ad)
* mt76: update to the latest versionFelix Fietkau2023-07-011-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2c9c8ffe9d8c wifi: mt76: mt7615: fix possible race in mt7615_mac_sta_poll 3365c80f4202 wifi: mt76: connac: fix stats->tx_bytes calculation b69d82130b47 wifi: mt76: connac: do not check WED status for non-mmio devices 1f9cd65b55d7 wifi: mt76: mt7921e: fix probe timeout after reboot 42dace9ce247 wifi: mt76: mt7921: Fix use-after-free in fw features query. 540adbb38205 wifi: mt76: mt7921: add Netgear AXE3000 (A8000) support 150e2d0ffc0c wifi: mt76: mt7996: fix possible NULL pointer dereference in mt7996_mac_write_txwi() 5b7519be2bf6 wifi: mt76: mt7996: fix endianness of MT_TXD6_TX_RATE 40f6e433f747 wifi: mt76: mt76x02: remove WEP support 84ea1a24f5b5 mt76: mt7921: don't assume adequate headroom for SDIO headers 5c28e17f8c78 wifi: mt76: mt7996: fix header translation logic 2386cec860fa wifi: mt76: mt7996: enable BSS_CHANGED_MU_GROUPS support 748d4a2bfebd wifi: mt76: mt7615: enable BSS_CHANGED_MU_GROUPS support 458ad0af21be wifi: mt76: enable UNII-4 channel 177 support 7fb046011293 wifi: mt76: mt7915: fix background radar event being blocked d2a77a9954bb wifi: mt76: mt7915: report tx retries/failed counts for non-WED path f76b102b09ca wifi: mt76: mt7915: rework tx packets counting when WED is active 5637d9e37d9e wifi: mt76: mt7915: rework tx bytes counting when WED is active 34bdc7fcb4c0 wifi: mt76: report non-binding skb tx rate when WED is active d71aa7b992a3 wifi: mt76: mt7915: drop return in mt7915_sta_statistics 251c363c3087 wifi: mt76: mt7996: drop return in mt7996_sta_statistics 150bb95cb153 wifi: mt76: mt7921: do not support one stream on secondary antenna only d480c3281f21 wifi: mt76: mt7921: remove macro duplication in regs.h 18b1027e5b6e wifi: mt76: mt7915: move mib_stats structure in mt76.h 25ec4b91020e wifi: mt76: mt7996: rely on mib_stats shared definition 6541afa88b3b wifi: mt76: mt7921: rely on mib_stats shared definition eeb60eb9a5a0 wifi: mt76: mt7915: add support for MT7981 [sync with upstream] d5b7e6a3d735 wifi: mt76: mt7921e: report tx retries/failed counts in tx free event f0f19cea6646 wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU edd8a830f6e3 wifi: mt76: add tx_nss histogram to ethtool stats e48235308b3e wifi: mt76: mt7915: accumulate mu-mimo ofdma muru stats a729242363d9 wifi: mt76: mt7921: fix non-PSC channel scan fail 8d52436ee0cd wifi: mt76: mt7921: Support temp sensor d152c8688c14 wifi: mt76: mt7915: disable WFDMA Tx/Rx during SER recovery d07785c344ac wifi: mt76: mt7996: disable WFDMA Tx/Rx during SER recovery 2a19784137f9 wifi: mt76: mt7921: make mt7921_mac_sta_poll static da8e33a15e71 wifi: mt76: mt7915: fix command timeout in AP stop period cc58d5c4a9c9 mt76: mt7996: rely on mt76_sta_stats in mt76_wcid 98a37c82a373 wifi: mt76: mt7921: get rid of MT7921_RESET_TIMEOUT marco ece724cf562b wifi: mt76: mt7996: move radio ctrl commands to proper functions 527cbbc5ede7 wifi: mt76: connac: add support for dsp firmware download 44e323340637 wifi: mt76: mt7996: fix bss wlan_idx when sending bss_info command 63f0053df07a wifi: mt76: mt7996: enable VHT extended NSS BW feature e1bb4ef7b2bb wifi: mt76: connac: add support to set ifs time by mcu command 080ca19cc686 wifi: mt76: mt7996: use correct phy for background radar event 2c163f1812a3 wifi: mt76: mt7996: fix WA event ring size b511a437ace4 wifi: mt76: mt7996: add muru support ece67c98dc1c wifi: mt76: mt7996: increase tx token size 7c2515d85117 wifi: mt76: mt7921e: fix init command fail with enabled device 30706095c566 wifi: mt76: mt7915: move sta_poll_list and sta_poll_lock in mt76_dev b06ed10ee271 wifi: mt76: mt7603: rely on shared sta_poll_list and sta_poll_lock b59bdae339de wifi: mt76: mt7615: rely on shared sta_poll_list and sta_poll_lock 6da2e0e4ef54 wifi: mt76: mt7996: rely on shared sta_poll_list and sta_poll_lock b19d3ad88e8b wifi: mt76: mt7921: rely on shared sta_poll_list and sta_poll_lock 595b033275a3 wifi: mt76: mt7915: move poll_list in mt76_wcid 16fcad171849 wifi: mt76: mt7603: rely on shared poll_list field e19f84091d2e wifi: mt76: mt7615: rely on shared poll_list field b87e4dad1e84 wifi: mt76: mt7996: rely on shared poll_list field 6d7950e258d0 wifi: mt76: mt7921: rely on shared poll_list field f5c5eece5038 wifi: mt76: move ampdu_state in mt76_wcid 7e44467469fe mt76: connac: move more mt7921/mt7915 mac shared code in connac lib 39a70710ddcd wifi: mt76: move rate info in mt76_vif 0dc4326991df wifi: mt76: connac: move connac3 definitions in mt76_connac3_mac.h 29cfabbb4b90 wifi: mt76: connac: add connac3 mac library d60b401867f4 linux-firmware: update firmware for MT7922 WiFi device 9404601a6c97 linux-firmware: update firmware for MT7922 WiFi device 2f851902d6b1 linux-firmware: update firmware for MT7921 WiFi device f36b921692b9 Revert "wifi: mt76: mt76x02: remove WEP support c50be0b54cdd wifi: mt76: mt7915: fix capabilities in non-AP mode d7d7479b00e9 wifi: mt7915: fix beaconing in mesh mode 1377f586c6f5 wifi: mt7915: move capability check to start_ap Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 01885bc6a33dbfa6f3c9e97778fd8f4f60e2514f) (cherry picked from commit 86ebaef5d427c5732847168f6ceeda12bf528414)
* mediatek: add support for Mercusys MR90X v1Mikhail Zhilkin2023-07-011-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for Mercusys MR90X(EU) v1 router. Device specification -------------------- SoC Type: MediaTek MT7986BLA, Cortex-A53, 64-bit RAM: MediaTek MT7986BLA (512MB) Flash: SPI NAND GigaDevice GD5F1GQ5UEYIGY (128 MB) Ethernet: MediaTek MT7531AE + 2.5GbE MaxLinear GPY211C0VC (SLNW8) Ethernet: 1x2.5Gbe (WAN/LAN 2.5Gbps), 3xGbE (WAN/LAN 1Gbps, LAN1, LAN2) WLAN 2g: MediaTek MT7975N, b/g/n/ax, MIMO 4x4 WLAN 5g: MediaTek MT7975P(N), a/n/ac/ax, MIMO 4x4 LEDs: 1 orange and 1 green status LEDs, 4 green gpio-controlled LEDs on ethernet ports Button: 1 (Reset) USB ports: No Power: 12 VDC, 2 A Connector: Barrel Bootloader: Main U-Boot - U-Boot 2022.01-rc4. Additionally, both UBI slots contain "seconduboot" (also U-Boot 2022.01-rc4) Serial console (UART) --------------------- V +-------+-------+-------+-------+ | +3.3V | GND | TX | RX | +---+---+-------+-------+-------+ | +--- Don't connect The R3 (TX line) and R6 (RX line) are absent on the PCB. You should solder them or solder the jumpers. Installation (UART) ------------------- 1. Place OpenWrt initramfs image on tftp server with IP 192.168.1.2 2. Attach UART, switch on the router and interrupt the boot process by pressing 'Ctrl-C' 3. Load and run OpenWrt initramfs image: tftpboot initramfs-kernel.bin bootm 4. Once inside OpenWrt, set / update env variables: fw_setenv baudrate 115200 fw_setenv bootargs "ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit" fw_setenv fdtcontroladdr 5ffc0e70 fw_setenv ipaddr 192.168.1.1 fw_setenv loadaddr 0x46000000 fw_setenv mtdids "spi-nand0=spi-nand0" fw_setenv mtdparts "spi-nand0:2M(boot),1M(u-boot-env),50M(ubi0),50M(ubi1),8M(userconfig),4M(tp_data)" fw_setenv netmask 255.255.255.0 fw_setenv serverip 192.168.1.2 fw_setenv stderr serial@11002000 fw_setenv stdin serial@11002000 fw_setenv stdout serial@11002000 fw_setenv tp_boot_idx 0 5. Run 'sysupgrade -n' with the sysupgrade OpenWrt image Installation (without UART) --------------------------- 1. Login as root via SSH (router IP, port 20001, password - your web interface password) 2. Open for editing /etc/hotplug.d/iface/65-iptv (e.g., using WinSCP and SSH settings from the p.1) 3. Add a newline after "#!/bin/sh": telnetd -l /bin/login.sh 4. Save "65-iptv" file 5. Toggle "IPTV/VLAN Enable" checkbox in the router web interface and save 6. Make sure that telnetd is running: netstat -ltunp | grep 23 7. Login via telnet to router IP, port 23 (no username and password are required) 8 Upload OpenWrt "initramfs-kernel.bin" to the "/tmp" folder of the router (e.g., using WinSCP and SSH settings from the p.1) 9. Stock busybox doesn't contain ubiupdatevol command. Hence, we need to download and upload the full version of busybox to the router. For example, from here: https://github.com/xerta555/Busybox-Binaries/raw/master/busybox-arm64 Upload busybox-arm64 to the /tmp dir of the router and run: in the telnet shell: cd /tmp chmod a+x busybox-arm64 10. Check "initramfs-kernel.bin" size: du -h initramfs-kernel.bin 11. Delete old and create new "kernel" volume with appropriate size (greater than "initramfs-kernel.bin" size): ubirmvol /dev/ubi0 -N kernel ubimkvol /dev/ubi0 -n 1 -N kernel -s 9MiB 12. Write OpenWrt "initramfs-kernel.bin" to the flash: ./busybox-arm64 ubiupdatevol /dev/ubi0_1 /tmp/initramfs-kernel.bin 13. u-boot-env can be empty so lets create it (or overwrite it if it already exists) with the necessary values: fw_setenv baudrate 115200 fw_setenv bootargs "ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit" fw_setenv fdtcontroladdr 5ffc0e70 fw_setenv ipaddr 192.168.1.1 fw_setenv loadaddr 0x46000000 fw_setenv mtdids "spi-nand0=spi-nand0" fw_setenv mtdparts "spi-nand0:2M(boot),1M(u-boot-env),50M(ubi0),50M(ubi1),8M(userconfig),4M(tp_data)" fw_setenv netmask 255.255.255.0 fw_setenv serverip 192.168.1.2 fw_setenv stderr serial@11002000 fw_setenv stdin serial@11002000 fw_setenv stdout serial@11002000 fw_setenv tp_boot_idx 0 14. Reboot to OpenWrt initramfs: reboot 15. Login as root via SSH (IP 192.168.1.1, port 22) 16. Upload OpenWrt sysupgrade.bin image to the /tmp dir of the router 17. Run sysupgrade: sysupgrade -n /tmp/sysupgrade.bin Recovery -------- 1. Press Reset button and power on the router 2. Navigate to U-Boot recovery web server (http://192.168.1.1/) and upload the OEM firmware Recovery (UART) --------------- 1. Place OpenWrt initramfs image on tftp server with IP 192.168.1.2 2. Attach UART, switch on the router and interrupt the boot process by pressing 'Ctrl-C' 3. Load and run OpenWrt initramfs image: tftpboot initramfs-kernel.bin bootm 4. Do what you need (restore partitions from a backup, install OpenWrt etc.) Stock layout ------------ 0x000000000000-0x000000200000 : "boot" 0x000000200000-0x000000300000 : "u-boot-env" 0x000000300000-0x000003500000 : "ubi0" 0x000003500000-0x000006700000 : "ubi1" 0x000006700000-0x000006f00000 : "userconfig" 0x000006f00000-0x000007300000 : "tp_data" ubi0/ubi1 format ---------------- U-Boot at boot checks that all volumes are in place: +-------------------------------+ | Volume Name: uboot Vol ID: 0| | Volume Name: kernel Vol ID: 1| | Volume Name: rootfs Vol ID: 2| +-------------------------------+ MAC addresses ------------- +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | label | 00:eb:xx:xx:xx:be | label | | LAN | 00:eb:xx:xx:xx:be | label | | WAN | 00:eb:xx:xx:xx:bf | label+1 | | WLAN 2g | 00:eb:xx:xx:xx:be | label | | WLAN 5g | 00:eb:xx:xx:xx:bd | label-1 | +---------+-------------------+-----------+ label MAC address was found in UBI partition "tp_data", file "default-mac". OEM wireless eeprom is also there (file "MT7986_EEPROM.bin"). Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> (cherry picked from commit e4fe3097ef6a961874b66932a0ac4be18070630a) [Fix merging conflict] Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ipq4019: add support for ZTE MF287+ aka DreiNeoAndreas Böhler2023-07-011-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZTE MF287+ is a LTE router used (exclusively?) by the network operator "3". The MF287 (i.e. non-plus aka 3Neo) is also supported (the only difference is the LTE modem) Specifications ============== SoC: IPQ4018 RAM: 256MiB Flash: 8MiB SPI-NOR + 128MiB SPI-NAND LAN: 4x GBit LAN LTE: ZTE Cat12 (MF287+) / ZTE Cat6 (MF287) WiFi: 802.11a/b/g/n/ac SoC-integrated MAC addresses ============= LAN: from config + 2 WiFi 1: from config WiFi 2: from config + 1 Installation ============ Option 1 - TFTP --------------- TFTP installation using UART is preferred. Disassemble the device and connect serial. Put the initramfs image as openwrt.bin to your TFTP server and configure a static IP of 192.168.1.100. Load the initramfs image by typing: setenv serverip 192.168.1.100 setenv ipaddr 192.168.1.1 tftpboot 0x82000000 openwrt.bin bootm 0x82000000 From this intiramfs boot you can take a backup of the currently installed partitions as no vendor firmware is available for download: ubiattach -m14 cat /dev/ubi0_0 > /tmp/ubi0_0 cat /dev/ubi0_1 > /tmp/ubi0_1 Copy the files /tmp/ubi0_0 and /tmp/ubi0_1 somewhere save. Once booted, transfer the sysupgrade image and run sysupgrade. You might have to delete the stock volumes first: ubirmvol /dev/ubi0 -N ubi_rootfs ubirmvol /dev/ubi0 -N kernel Option 2 - From stock firmware ------------------------------ The installation from stock requires an exploit first. The exploit consists of a backup file that forces the firmware to download telnetd via TFTP from 192.168.0.22 and run it. Once exploited, you can connect via telnet and login as admin:admin. The exploit will be available at the device wiki page. Once inside the stock firmware, you can transfer the -factory.bin file to /tmp by using "scp" from the stock frmware or "tftp". ZTE has blocked writing to the NAND. Fortunately, it's easy to allow write access - you need to read from one file in /proc. Once done, you need to erase the UBI partition and flash OpenWrt. Before performing the operation, make sure that mtd13 is the partition labelled "rootfs" by calling "cat /proc/mtd". Complete commands: cd /tmp tftp -g -r factory.bin 192.168.0.22 cat /proc/driver/sensor_id flash_erase /dev/mtd13 0 0 dd if=/tmp/factory.bin of=/dev/mtdblock13 bs=131072 Afterwards, reboot your device and you should have a working OpenWrt installation. Restore Stock ============= Option 1 - via UART ------------------- Boot an OpenWrt initramfs image via TFTP as for the initial installation. Transfer the two backed-up files to your box to /tmp. Then, run the following commands - replace $kernel_length and $rootfs_size by the size of ubi0_0 and ubi0_1 in bytes. ubiattach -m 14 ubirmvol /dev/ubi0 -N kernel ubirmvol /dev/ubi0 -N rootfs ubirmvol /dev/ubi0 -N rootfs_data ubimkvol /dev/ubi0 -N kernel -s $kernel_length ubimkvol /dev/ubi0 -N ubi_rootfs -s $rootfs_size ubiupdatevol /dev/ubi0_0 /tmp/ubi0_0 ubiupdatevol /dev/ubi0_1 /tmp/ubi0_1 Option 2 - from within OpenWrt ------------------------------ This option requires to flash an initramfs version first so that access to the flash is possible. This can be achieved by sysupgrading to the recovery.bin version and rebooting. Once rebooted, you are again in a default OpenWrt installation, but no partition is mounted. Follow the commands from Option 1 to flash back to stock. LTE Modem ========= The LTE modem is similar to other ZTE devices and controls some more LEDs and battery management. Configuring the connection using uqmi works properly, the modem provides three serial ports and a QMI CDC ethernet interface. Signed-off-by: Andreas Böhler <dev@aboehler.at> (cherry picked from commit f70ee53b08466f612546f699c556cbdaa39e1466)
* uboot-envtools: Add u-boot env config for GL-MT3000Jianhui Zhao2023-07-011-0/+3
| | | | | | | | | This commit add u-boot env config for GL-MT3000, so that we can use fw_printenv to print u-boot env and use fw_setenv to set u-boot env in GL-MT3000. Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com> (cherry picked from commit 6892603efa11603c6f365bee1cf94e98336d72aa)
* OpenWrt v23.05.0-rc2: revert to branch defaultsHauke Mehrtens2023-06-281-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v23.05.0-rc2: adjust config defaultsv23.05.0-rc2Hauke Mehrtens2023-06-281-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* filogic: add support for Netgear WAX220Flole Systems2023-06-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SOC: MediaTek MT7986 RAM: 1024MB DDR3 FLASH: 128MB SPI-NAND (Winbond) WIFI: Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz ETH: Realtek RTL8221B-VB-CG 2.5 N-Base-T PHY with PoE UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC) Installation ------------ 1. Download the OpenWrt initramfs image. Copy the image to a TFTP server 2. Connect the TFTP server to the WAX220. Conect to the serial console, interrupt the autoboot process by pressing '0' when prompted. 3. Download & Boot the OpenWrt initramfs image. $ setenv ipaddr 192.168.2.1 $ setenv serverip 192.168.2.2 $ tftpboot openwrt.bin $ bootm 4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device using scp and install using sysupgrade. $ sysupgrade -n <path-to-sysupgrade.bin> Signed-off-by: Flole Systems <flole@flole.de> Signed-off-by: Stefan Agner <stefan@agner.ch> (cherry picked from commit 984786a2f7ec622c99e8c9cdada65d0ea0cf4e0b)
* uhttpd: update to latest git HEADHauke Mehrtens2023-06-251-3/+3
| | | | | | | 34a8a74 uhttpd/file: fix string out of buffer range on uh_defer_script Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 7a6f6b812632a5983cd34ab5c41271d5d4de5fbf)
* odhcpd: bump to latest git HEADChristian Marangi2023-06-241-3/+3
| | | | | | | | 5211264 odhcpd: add support for dhcpv6_pd_min_len parameter c6bff6f router: Add PREF64 (RFC 8781) support Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit acd9981b4ef750544202df9d9e2d0143a6dfd478)
* netfilter: fix typo in nf-socket and nf-tproxy kconfigChristian Marangi2023-06-231-2/+2
| | | | | | | | | Fix a typo where the wrong KCONFIG was used and fix selecting the correct kernel config option to use these packages. Fixes: 4f443c885ded ("netfilter: separate packages for kmod-ipt-socket and kmod-ipt-tproxy") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 3ebebf08be950a8a0f3bf5b2c3db910621f2cc21)
* mac80211: always use mac80211 loss detectionDavid Bauer2023-06-231-0/+36
| | | | | | | | | | | | | ath10k does not report excessive loss in case of broken block-ack sessions. The loss is communicated to the host-os, but ath10k does not trigger a low-ack events by itself. The mac80211 framework for loss detection however detects this circumstance well in case of ath10k. So use it regardless of ath10k's own loss detection mechanism. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit ed816f6ba8b5e3df609e5fc53f7bcb09bdaa16be)
* ath79: add support for Aruba AP-115David Bauer2023-06-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware ======== CPU Qualcomm Atheros QCA9558 RAM 256MB DDR2 FLASH 2x 16M SPI-NOR (Macronix MX25L12805D) WIFI Qualcomm Atheros QCA9558 Atheros AR9590 Installation ============ 1. Attach to the serial console of the AP-105. Interrupt autoboot and change the U-Boot env. $ setenv rb_openwrt "setenv ipaddr 192.168.1.1; setenv serverip 192.168.1.66; netget 0x80060000 ap115.bin; go 0x80060000" $ setenv fb_openwrt "bank 1; cp.b 0xbf100040 0x80060000 0x10000; go 0x80060000" $ setenv bootcmd "run fb_openwrt" $ saveenv 2. Load the OpenWrt initramfs image on the device using TFTP. Place the initramfs image as "ap105.bin" in the TFTP server root directory, connect it to the AP and make the server reachable at 192.168.1.66/24. $ run rb_openwrt 3. Once OpenWrt booted, transfer the sysupgrade image to the device using scp and use sysupgrade to install the firmware. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 1b467a902ec9b8bf29805c6928627e8bbad0f14c)
* ramips: Add support for Beeline SmartBox TURBO+Maximilian Weinmann2023-06-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for Beeline Smart Box TURBO+ (Serсomm S3 CQR) router. Device specification -------------------- SoC Type: MediaTek MT7621AT (880 MHz, 2 cores) RAM (Nanya NT5CC64M16GP): 128 MiB Flash (Macronix MX30LF1G18AC): 128 MiB Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2 Wireless 5 GHz (MT7615N): a/n/ac, 4x4 Ethernet: 5 ports - 5×GbE (WAN, LAN1-4) USB ports: 1xUSB3.0 Buttons: 2 button (reset, wps) LEDs: Red, Green, Blue Zigbee (EFR32MG1B232GG): 3.0 Stock bootloader: U-Boot 1.1.3 Power: 12 VDC, 1.5 A Installation (fw 2.0.9) ----------------------- 1. Login to the web interface under SuperUser (root) credentials. Password: SDXXXXXXXXXX, where SDXXXXXXXXXX is serial number of the device written on the backplate stick. 2. Navigate to Setting -> WAN. Add: Name - WAN1 Connection Type - Static IP Address - 172.16.0.1 Netmask - 255.255.255.0 Save -> Apply. Set default: WAN1 3. Enable SSH and HTTP on WAN. Setting -> Remote control. Add: Protocol - SSH Port - 22 IP Address - 172.16.0.1 Netmask - 255.255.255.0 WAN Interface - WAN1 Save ->Apply Add: Protocol - HTTP Port - 80 IP Address - 172.16.0.1 Netmask - 255.255.255.0 WAN interface - WAN1 Save -> Apply 4. Set up your PC ethernet: Connection Type - Static IP Address - 172.16.0.2 Netmask - 255.255.255.0 Gateway - 172.16.0.1 5. Connect PC using ethernet cable to the WAN port of the router 6. Connect to the router using SSH shell under SuperUser account 7. Make a mtd backup (optional, see related section) 8. Change bootflag to Sercomm1 and reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3 reboot 9. Login to the router web interface under admin account 10. Remove dots from the OpenWrt factory image filename 11. Update firmware via web using OpenWrt factory image Revert to stock --------------- Change bootflag to Sercomm1 in OpenWrt CLI and then reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3 mtd backup ---------- 1. Set up a tftp server (e.g. tftpd64 for windows) 2. Connect to a router using SSH shell and run the following commands: cd /tmp for i in 0 1 2 3 4 5 6 7 8 9 10; do nanddump -f mtd$i /dev/mtd$i; \ tftp -l mtd$i -p 172.16.0.2; md5sum mtd$i >> mtd.md5; rm mtd$i; done tftp -l mtd.md5 -p 171.16.0.2 Recovery -------- Use sercomm-recovery tool. Link: https://github.com/danitool/sercomm-recovery MAC Addresses (fw 2.0.9) ------------------------ +-----+------------+---------+ | use | address | example | +-----+------------+---------+ | LAN | label | *:e8 | | WAN | label + 1 | *:e9 | | 2g | label + 4 | *:ec | | 5g | label + 5 | *:ed | +-----+------------+---------+ The label MAC address was found in Factory 0x21000 Factory image format -------------------- +---+-------------------+-------------+--------------------+ | # | Offset | Size | Description | +---+-------------------+-------------+--------------------+ | 1 | 0x0 | 0x200 | Tag Header Factory | | 2 | 0x200 | 0x100 | Tag Header Kernel1 | | 3 | 0x300 | 0x100 | Tag Header Kernel2 | | 4 | 0x400 | SIZE_KERNEL | Kernel | | 5 | 0x400+SIZE_KERNEL | SIZE_ROOTFS | RootFS(UBI) | +---+-------------------+-------------+--------------------+ Co-authored-by: Mikhail Zhilkin <csharper2005@gmail.com> Signed-off-by: Maximilian Weinmann <x1@disroot.org> (cherry picked from commit 8fcfb21b16e7537b9a871a1f67cb218c6be93149)
* openssl: passing cflags to configureJitao Lu2023-06-171-1/+2
| | | | | | | | | openssl sets additional cflags in its configuration script. We need to make it aware of our custom cflags to avoid adding conflicting cflags. Fixes: #12866 Signed-off-by: Jitao Lu <dianlujitao@gmail.com> (cherry picked from commit 51f57e7c2dd2799e34036ec74b3436bf490fade0)
* base-files: upgrade: nand: add JFFS2 cleanmarkers supportÁlvaro Fernández Rojas2023-06-151-2/+10
| | | | | | | | | Some Broadcom MIPS devices require JFFS2 cleanmarkers to be present on the kernel partition or the bootloader will identify the partition as corrupt and won't boot the kernel. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 434df8df549a4d709be9eb19c0d2bd8abb4d4881)
* uboot-sifiveu: add bootloader package for SiFive Ux40 boardsZoltan HERPAI2023-06-1412-0/+566
| | | | | | | | Add new package for building bootloader for the SiFive U-series boards. Supported boards at this stage are the HiFive Unleashed and HiFive Unmatched. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> (cherry picked from commit 91406797f9d06c0008f0a8c2c8455abfb37bf28c)
* openssl: add linux-riscv64 into the targets listZoltan HERPAI2023-06-141-1/+5
| | | | | | | | Add "linux-riscv64-openwrt" into openssl configurations to enable building on riscv64. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> (cherry picked from commit a0840ecd5309921b62fcf5f563180ef8f955509e)
* opensbi: add package for RISC-VZoltan HERPAI2023-06-141-0/+63
| | | | | | | | | | | | | | | OpenSBI is a form of a first-stage bootloader, which initializes certain parts of an SoC and then passes on control to the second stage bootloader i.e. an u-boot image. We're introducing the package with release v1.2, which provides SBI v0.3 and the SBI SRST extensions which helps to gracefully reboot/shutdown various HiFive-U SoCs. Tested on SiFive Unleashed and Unmatched boards. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> (cherry picked from commit 944b13b3ee1d89e11a0121fbeeaa465ab1e25c3c)
* uboot-armsr: add support for QEMU armv7/armv8Petr Štetiar2023-06-132-0/+98
| | | | | | | | | | | | Add new package so we can use self-compiled bootloader during QEMU based testing and development. Backported fix[1] is needed for EFI boot from virtio devices. 1. https://patchwork.ozlabs.org/project/uboot/patch/20230424134946.v10.7.Ia5f5e39c882ac22b5f71c4d576941b34e868eeba@changeid/ Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit b8e3fa2d1205213c71bc356744e9bed6cd8e69f9)
* wolfssl: change armvirt reference to armsrMathew McBride2023-06-131-2/+2
| | | | | | | armvirt target has been renamed to armsr (Arm SystemReady). Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit 203deef82cdcb2c4deb01e2a4cee62a600723320)
* kernel: netdevices: change armvirt references to armsrMathew McBride2023-06-131-4/+4
| | | | | | | armvirt target has been renamed to armsr (Arm SystemReady) Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit c0bcfde58e751d674adfac51944df9e20ab978e4)
* grub2: change armvirt reference to armsrMathew McBride2023-06-131-1/+1
| | | | | | | | The armvirt target has been renamed to armsr (Arm SystemReady), so the GRUB configuration also needs to change. Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit 4ce7d6c8885a0e1873011f8f48b67e2ecd18e43d)
* kernel: kmod-amazon-ena: move to top level netdevicesMathew McBride2023-06-131-1/+15
| | | | | | | | | The Amazon ENA network devices are also used on the AWS Arm (Graviton) instance types, so move it from the x86-only module file to the top level netdevices. Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit 3a7c8fd15e89237c8c9db62393d057f3a47429d2)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 20:42:00 +0000