aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* kselftests-bpf: add kernel BPF testsTony Ambardar2023-06-091-0/+63
| | | | | | | | | | | | | | Build and package kernel self-tests used for BPF testing, program and JIT development. This package, together with the existing 'kmod-bpf-test', was extensively used for past upstream Linux JIT submissions [1]. Currently this includes only 'test_verifier'; building 'test_progs' will fail due to known endian limitations with bpftool skeletons. [1]:https://lore.kernel.org/bpf/cover.1633392335.git.Tony.Ambardar@gmail.com Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit 3886ea9b87c416c080078603fedea95bcc144442)
* base-files: enable BPF JIT kallsyms by defaultTony Ambardar2023-06-091-0/+1
| | | | | | | | | | | Set net.core.bpf_jit_kallsyms=1 in /etc/sysctl.d/10-default.conf. For privileged users, this exports addresses of JIT-compiled programs to appear in /proc/kallsyms when present, allowing their use for debugging and in traces. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit b3aaede2a7b14f2be850db8ae0c826e2782a60e8)
* uboot-rockchip: add Orange Pi R1 Plus LTS supportTianling Shen2023-06-095-0/+499
| | | | | | | | | Add support for the Xunlong Orange Pi R1 Plus LTS. Manually generated of-platdata files to avoid swig dependency. Tested-by: Volkan Yetik <no3iverson@gmail.com> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit 37fed89166e6e21c20ef92b36106f7184a0476c6)
* uboot-rockchip: add Orange Pi R1 Plus supportTianling Shen2023-06-095-0/+821
| | | | | | | | Add support for the Xunlong Orange Pi R1 Plus. Manually generated of-platdata files to avoid swig dependency. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit 043f8a4f5ecf00e8a62b5a5d48baba48e620ea6a)
* openssl: fix uci config for built-in enginesTianling Shen2023-06-081-10/+3
| | | | | | | | | | | | | | | | | | | | | | | | Built-in engine configs are added in libopenssl-conf/install stage already, postinst/add_engine_config is just duplicating them, and due to the lack of `config` header it results a broken uci config: > uci: Parse error (invalid command) at line 3, byte 0 ``` config engine 'devcrypto' option enabled '1' engine 'devcrypto' option enabled '1' option builtin '1' ``` Add `builtin` option in libopenssl-conf/install stage and remove duplicate engine configuration in postinst/add_engine_config to fix this issue. Fixes: 0b70d55a64c39d ("openssl: make UCI config aware of built-in engines") Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit a0d71934253f599f4ac651b1b3a429901049e802)
* netfilter: fix typo in kmod-nft-dup-inetKevin Darbyshire-Bryant2023-06-081-1/+1
| | | | | | | Fix typo of 'family' in a7e9445975 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 191742eb8ddc4353eedf71a327fb17a11c5a3a99)
* ubnt-ledbar: depend on mediatek and ramips subtargetsTomasz Maciej Nowak2023-06-081-1/+1
| | | | | | | | It's only used on devices in mt7621 and mt7622 subtargets, so no reason to compile it for others. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (cherry picked from commit e81298463ed45cd03d45837c12f4c0a4b85f6cd4)
* netifd: update to the latest versionFelix Fietkau2023-06-071-3/+3
| | | | | | | ec9dba721245 system-linux: fix memory leak in system_bridge_vlan_check Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 20ce21866e482c132df7085061f28dfdafc8a48a)
* netifd: Fix PKG_MIRROR_HASHHauke Mehrtens2023-06-071-1/+1
| | | | | | | | Fix the PKG_MIRROR_HASH value for netifd. Fixes: d2ecaaca3404 ("netifd: update to version 2023-05-31") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 21f713d5abf86fc5639b41d7f4e7535a5538d63a)
* netifd: update to version 2023-05-31Petr Štetiar2023-06-071-3/+3
| | | | | | | | | | | | Contains following changes: * bridge: bridge_dump_info: add dumping of bridge attributes * bridge: make it more clear why the config was applied * cmake: fix build by reordering the cflags definitions * treewide: fix multiple compiler warnings Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit d2ecaaca3404a05ba65bb6756bc5fbd05389ed2f)
* OpenWrt v23.05.0-rc1: revert to branch defaultsHauke Mehrtens2023-06-071-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v23.05.0-rc1: adjust config defaultsv23.05.0-rc1Hauke Mehrtens2023-06-071-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* selinux-policy: update to 1.2.5Linhui Liu2023-05-312-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | 30d503a uci jsonfilter: pipe and leak e13cb64 rpcd leds 144781f jsonfilter, luci, ubus 1210762 rpcd and all agents get fd's leaked ab9227c rpcd 2f99e0e luci rpcd b43aaf3 rpcd (enable/disable services) luci peeraddr f20f03e rpcd 7bc74f6 rpcd reads all subj state and luci-bwc leaks 9634b17 adds inotify perms to anon_inode 3d3c17c adds bare anon_inode (linux 5.15) 7104b20 dnsmasq and luci 0de2c66 luci,rpcd, ucode, wpad 14f5cf9 luci and ucode e3ce84c rpcd, ucode and cgiio loose ends 96a2401 misc updates 9fe0490 initscript: remove redundant rules 71bd77e allow all init scripts to log to logd f697331 sandbox: make ttydev handling more robust a471877 simplify pty tty console access f738984 sandbox: also remove TIOSCTI from all ttydevs Signed-off-by: Linhui Liu <liulinhui36@gmail.com> (cherry picked from commit 4c5a9da8699a7982b8f03b28561f955d9d1313f1)
* ca-certificates: Update to version 20230311Tianling Shen2023-05-312-13/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the ca-certificates and ca-bundle package from version 20211016 to version 20230311. Use TAR_OPTIONS instead of hacking Build/Prepare, refresh patches. Debian change-log entry [1]: |[...] |[ Đoàn Trần Công Danh ] |* ca-certificates: compat with non-GNU mktemp (closes: #1000847) | |[ Ilya Lipnitskiy ] |* certdata2pem.py: use UTC time when checking cert validity | |[ Julien Cristau ] |* Update Mozilla certificate authority bundle to version 2.60 | The following certificate authorities were added (+): | + "Autoridad de Certificacion Firmaprofesional CIF A62634068" | + "Certainly Root E1" | + "Certainly Root R1" | + "D-TRUST BR Root CA 1 2020" | + "D-TRUST EV Root CA 1 2020" | + "DigiCert TLS ECC P384 Root G5" | + "DigiCert TLS RSA4096 Root G5" | + "E-Tugra Global Root CA ECC v3" | + "E-Tugra Global Root CA RSA v3" | + "HARICA TLS ECC Root CA 2021" | + "HARICA TLS RSA Root CA 2021" | + "HiPKI Root CA - G1" | + "ISRG Root X2" | + "Security Communication ECC RootCA1" | + "Security Communication RootCA3" | + "Telia Root CA v2" | + "TunTrust Root CA" | + "vTrus ECC Root CA" | + "vTrus Root CA" | The following certificate authorities were removed (-): | - "Cybertrust Global Root" (expired) | - "EC-ACC" | - "GlobalSign Root CA - R2" (expired) | - "Hellenic Academic and Research Institutions RootCA 2011" | - "Network Solutions Certificate Authority" | - "Staat der Nederlanden EV Root CA" (expired) |* Drop trailing space from debconf template causing misformatting | (closes: #980821) | |[ Wataru Ashihara ] |* Make certdata2pem.py compatible with cryptography >= 35 (closes: #1008244) |[...] [1]: https://metadata.ftp-master.debian.org/changelogs/main/c/ca-certificates/ca-certificates_20230311_changelog Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit 7c83b6ac8656f9a3b005554d25857e8ed5faf3f6)
* pcre2: fix host compilation of libselinux by enabling PICPetr Štetiar2023-05-311-1/+2
| | | | | | | | | | | | | | | libselinux-3.5 fails to compile in Fedora 38 container due to the following: cc -O2 -I/openwrt/staging_dir/host/include -I/openwrt/staging_dir/hostpkg/include -I/openwrt/staging_dir/target-x86_64_musl/host/include -I../include -D_GNU_SOURCE -DNO_ANDROID_BACKEND -DUSE_PCRE2 -DPCRE2_CODE_UNIT_WIDTH=8 -I/openwrt/staging_dir/hostpkg/include -L/openwrt/staging_dir/host/lib -L/openwrt/staging_dir/hostpkg/lib -L/openwrt/staging_dir/target-x86_64_musl/host/lib -Wl,-rpath=/openwrt/staging_dir/hostpkg/lib -shared -o libselinux.so.1 avc.lo avc_internal.lo avc_sidtab.lo booleans.lo callbacks.lo canonicalize_context.lo checkAccess.lo check_context.lo checkreqprot.lo compute_av.lo compute_create.lo compute_member.lo compute_relabel.lo compute_user.lo context.lo deny_unknown.lo disable.lo enabled.lo fgetfilecon.lo freecon.lo freeconary.lo fsetfilecon.lo get_context_list.lo get_default_type.lo get_initial_context.lo getenforce.lo getfilecon.lo getpeercon.lo init.lo is_customizable_type.lo label.lo label_db.lo label_file.lo label_media.lo label_support.lo label_x.lo lgetfilecon.lo load_policy.lo lsetfilecon.lo mapping.lo matchmediacon.lo matchpathcon.lo policyvers.lo procattr.lo query_user_context.lo regex.lo reject_unknown.lo selinux_check_securetty_context.lo selinux_config.lo selinux_internal.lo selinux_restorecon.lo sestatus.lo setenforce.lo setexecfilecon.lo setfilecon.lo setrans_client.lo seusers.lo sha1.lo stringrep.lo validatetrans.lo -L/openwrt/staging_dir/hostpkg/lib -lpcre2-8 -lfts -ldl -Wl,-soname,libselinux.so.1,--version-script=libselinux.map,-z,defs,-z,relro /usr/bin/ld: /openwrt/staging_dir/hostpkg/lib/libpcre2-8.a(pcre2_compile.c.o): relocation R_X86_64_32S against symbol `_pcre2_ucd_stage1_8' can not be used when making a shared object; recompile with -fPIC /usr/bin/ld: failed to set dynamic section sizes: bad value So lets fix it by enabling build of host static library with the position independent code option enabled. Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 12494f5b8a7bb48cbf7b2fba7d17a53981173120)
* netfilter: add kmod-nft-dup-inetMichał Kwiatek2023-05-311-1/+21
| | | | | | | Add kmod-nft-dup-inet package to allow packet duplication in ip/ip6/inet nftables family Signed-off-by: Michał Kwiatek <michal@kwiatek.it> (cherry picked from commit a7e9445975f832db887e6044d7e84220d2a68cf1)
* package: layerscape: change loadaddr addressPawel Dembicki2023-05-2916-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At this moment loadaddr in most layerscape boards are configured to 0x81000000. 5.15 kernel on some boards is bigger than 5.10 and it cause error: Loading kernel from FIT Image at 81000000 ... Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: ARM64 OpenWrt Linux-5.15.112 Created: 2023-05-21 17:39:35 UTC Type: Kernel Image Compression: gzip compressed Data Start: 0x810000ec Data Size: 7513944 Bytes = 7.2 MiB Architecture: AArch64 OS: Linux Load Address: 0x80000000 Entry Point: 0x80000000 Hash algo: crc32 Hash value: 6fd69550 Hash algo: sha1 Hash value: ee34c753ffb615e199a428762824ad4a0aaef90a Verifying Hash Integrity ... crc32+ sha1+ OK Loading fdt from FIT Image at 81000000 ... Using 'config-1' configuration Trying 'fdt-1' fdt subimage Description: ARM64 OpenWrt fsl_ls1088a-rdb-sdboot device tree blob Created: 2023-05-21 17:39:35 UTC Type: Flat Device Tree Compression: uncompressed Data Start: 0x8172a98c Data Size: 19794 Bytes = 19.3 KiB Architecture: AArch64 Hash algo: crc32 Hash value: 59792ba3 Hash algo: sha1 Hash value: 135585a49f86cd85acea559b78b0098ae99d5e12 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x8172a98c Uncompressing Kernel Image ERROR: new format image overwritten - must RESET the board to recover resetting ... This patch changes loadaddr to 0x88000000 (like LS1012A-FRDM board) to avoid overlapping for bigger images (like initramfs) too. Tested-by: Alexandra Alth <alexandra@alth.de> [LS1088ARDB] Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (cherry picked from commit 0822040671e6177020892e0ddbdfafd4bb3690e0)
* uboot-mediatek: add Qihoo 360T7 supportChukun Pan2023-05-294-0/+477
| | | | | | | | | The vendor uboot will verify firmware at boot. So add a custom uboot build for this device. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (cherry picked from commit c51eb177308835f811ae43b17dde0ea962ed1df1) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: add build for MT7981 DDR3Chukun Pan2023-05-291-0/+47
| | | | | | | | | | Add new build option BOARD_QFN/BOARD_BGA. This option is only useful for MT7981 device. MT7981A/B: BOARD_BGA, MT7981C: BOARD_QFN. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (cherry picked from commit 602cb4f3259cb676fcf6fa6c459d598df643653b) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7981: add reserved memory to support pstoreAlexander Couzens2023-05-291-0/+38
| | | | | | | | | | Add reserved memory for pstore/ramoops to device tree used by Linux as well as U-Boot. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 3eb354f999a3687f9ae547899b0f5ec2b10185ab) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bpftools: update, split off bpftool and libbpf packagesTony Ambardar2023-05-255-57/+92
| | | | | | | | | | | | | | | | My original bpftools package made "variant" builds of bpftool and libbpf as a convenience, since both used the same local kernel sources with the same versioning. This is no longer the case, since the commit below switched to using an out-of-tree build mirror hosting repos for each. Replace bpftools with separate bpftool and libbpf packages, each simplified and correctly versioned. Also fix the broken libbpf ABI introduced in the same commit. Existing build .config files are not impacted. Fixes: 00cbf6f6ab1d ("bpftools: update to standalone bpftools + libbpf, use the latest version") Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit afe1bf11f2539f75e30ab3206891dbe6f8c43bd5) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* busybox: update to 1.36.1Nick Hainke2023-05-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Release Notes: http://lists.busybox.net/pipermail/busybox-cvs/2023-May/041510.html Refresh commands, run after busybox is first built once (nothing changed compared to 1.36.0): cd package/utils/busybox/config/ ../convert_menuconfig.pl ../../../../build_dir/target-mipsel_24kc_musl/busybox-default/busybox-1.36.1 cd .. ./convert_defaults.pl ../../../build_dir/target-mipsel_24kc_musl/busybox-default/busybox-1.36.1/.config > Config-defaults.in Manual edits needed afterward: * Config-defaults.in: OpenWrt config symbol IPV6 logic applied to BUSYBOX_DEFAULT_FEATURE_IPV6 * Config-defaults.in: OpenWrt config TARGET_bcm53xx logic applied to BUSYBOX_DEFAULT_TRUNCATE (commit 547f1ec) * Config-defaults.in: OpenWrt logic applied to BUSYBOX_DEFAULT_LOGIN_SESSION_AS_CHILD (commit dc92917) * Config-defaults.in: correct the default ports that get reset BUSYBOX_DEFAULT_FEATURE_HTTPD_PORT_DEFAULT 80 BUSYBOX_DEFAULT_FEATURE_TELNETD_PORT_DEFAULT 23 * config/editors/Config.in: Add USE_GLIBC dependency to BUSYBOX_CONFIG_FEATURE_VI_REGEX_SEARCH (commit f141090) * config/shell/Config.in: change at "Options common to all shells" the conditional symbol SHELL_ASH --> BUSYBOX_CONFIG_SHELL_ASH (discussion in http://lists.openwrt.org/pipermail/openwrt-devel/2021-January/033140.html Apparently our script does not see the hidden option while prepending config options with "BUSYBOX_CONFIG_" which leads to a missed dependency when the options are later evaluated.) * Edit a few Config.in files by adding quotes to sourced items in config/Config.in, config/networking/Config.in and config/util-linux/Config.in (commit 1da014f) Tested-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 3b76f6eee430a107a0970583c1aa215b35f7e3e4) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libxml2: update to 2.11.4Nick Hainke2023-05-241-2/+2
| | | | | | | | | Release Notes: https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.4 Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit c520d682f02890afb38e43b862ca856e2b933507) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libcap: update to 2.69Nick Hainke2023-05-241-2/+2
| | | | | | | | | | Release Notes: https://sites.google.com/site/fullycapable/release-notes-for-libcap#h.iuvg7sbjg8pe Fixes: CVE-2023-2602 CVE-2023-2603 Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 78c45c1e591ce5aeff9fb7eeae049662c4ac4ef2) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* lldpd: update to 1.0.17Nick Hainke2023-05-241-2/+2
| | | | | | | | | Release Notes: https://github.com/lldpd/lldpd/releases/tag/1.0.17 Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 17fbbafdcbc55d6ab3d357012f336941fa27d43e) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Zyxel EX5601-T0 routerPietro Ameruoso2023-05-241-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zyxel EX5601-T0 specifics -------------- The operator specific firmware running on the Zyxel branded EX5601-T0 includes U-Boot modifications affecting the OpenWrt installation. Partition Table | dev | size | erasesize | name | | ---- | -------- | --------- | ------------- | | mtd0 | 20000000 | 00040000 | "spi0.1" | | mtd1 | 00100000 | 00040000 | "BL2" | | mtd2 | 00080000 | 00040000 | "u-boot-env" | | mtd3 | 00200000 | 00040000 | "Factory" | | mtd4 | 001c0000 | 00040000 | "FIP" | | mtd5 | 00040000 | 00040000 | "zloader" | | mtd6 | 04000000 | 00040000 | "ubi" | | mtd7 | 04000000 | 00040000 | "ubi2" | | mtd8 | 15a80000 | 00040000 | "zyubi" | The router boots BL2 which than loads FIP (u-boot). U-boot has hardcoded a command to always launch Zloader "mtd read zloader 0x46000000" and than "bootm". Bootargs are deactivated. Zloader is the zyxel booloader which allow to dual-boot ubi or ubi2, by default access to zloader is blocked. Too zloader checks that the firmware contains a particolar file called zyfwinfo. Additional details regarding Zloader can be found here: https://hack-gpon.github.io/zyxel/ https://forum.openwrt.org/t/adding-openwrt-support-for-zyxel-ex5601-t0/155914 Hardware -------- SOC: MediaTek MT7986a CPU: 4 core cortex-a53 (2000MHz) RAM: 1GB DDR4 FLASH: 512MB SPI-NAND (Micron xxx) WIFI: Wifi6 Mediatek MT7976 802.11ax 5 GHz 4x4 + 2.4GHZ 4x4 ETH: MediaTek MT7531 Switch + SoC 3 x builtin 1G phy (lan1, lan2, lan3) 1 x MaxLinear GPY211B 2.5 N-Base-T phy5 (lan4) 1 x MaxLinear GPY211B 2.5Gbit xor SFP/N-Base-T phy6 (wan) USB: 1 x USB 3.2 Enhanced SuperSpeed port UART: 3V3 115200 8N1 (Pinout: GND KEY RX TX VCC) VOIP: 2 FXS ports for analog phones MAC Address Table ----------------- eth0/lan Factory 0x002a eth1/wan Factory 0x0024 wifi 2.4Ghz Factory 0x0004 wifi 5Ghz Factory 0x0004 + 1 Serial console (UART) --------------------- +-------+-------+-------+-------+-------+ | +3.3V | RX | TX | KEY | GND | +---+---+-------+-------+-------+-------+ | +--- Don't connect Installation ------------ Keep in mind that openwrt can only run on the UBI partition, the openwrt firmware is not able to understand the zloader bootargs. The procedure allows restoring the UBI partition with the Zyxel firmware and retains all the OEM functionalities. 1. Unlock Zloader (this will allow to swap manually between partitions UBI and UBI2): - Attach a usb-ttl adapter to your computer and boot the router. - While the router is booting at some point you will read the following: `Please press Enter to activate this console.` - As soon as you read that press enter, type root and than press enter again (just do it, don't care about the logs scrolling). - Most likely the router is still printing the boot log, leave it boot until it stops. - If everything went ok you should have full root access "root@EX5601-T0:/#". - Type the following command and press enter: "fw_setenv EngDebugFlag 0x1". - Reboot the router. - As soon as you read `Hit any key to stop autoboot:` press Enter. - If everything went ok you should have the following prompt: "ZHAL>". - You have successfully unlocked zloader access, this procedure must be done only once. 2. Check the current active partition: - Boot the router and repeat the steps above to gain root access. - Type the following command to check the current active image: "cat /proc/cmdline". - If `rootubi=ubi` it means that the active partition is `mtd6` - If `rootubi=ubi2` it means that the active partition is `mtd7` - As mentioned earlier we need to flash openwrt into ubi/mtd6 and never overwrite ubi2/mtd7 to be able to fully roll-back. - To activate and boot from mtd7 (ubi2) enter into ZHAL> command prompt and type the following commands: atbt 1 # unlock write atsw # swap boot partition atsr # reboot the router - After rebooting check again with "cat /proc/cmdline" that you are correctly booting from mtd7/ubi2 - If yes proceed with the installation guide. If not probably you don't have a firmware into ubi2 or you did something wrong. 3. Flashing: - Download the sysupgrade file for the router from openwrt, than we need to add the zyfwinfo file into the sysupgrade tar. Zloader only checks for the magic (which is a fixed value 'EXYZ') and the crc of the file itself (256bytes). I created a script to create a valid zyfwinfo file but you can use anything that does exactly the same: https://raw.githubusercontent.com/pameruoso/OpenWRT-Zyxel-EX5601-T0/main/gen_zyfwinfo.sh - Add the zyfwinfo file into the sysupgrade tar. - Enter via telnet or ssh into the router with admin credentials - Enter the following commands to disable the firmware and model checks "zycli fwidcheck off" and "zycli modelcheck off" - Open the router web interface and in the update firmware page select the "restore default settings option" - Select the sysupgrade file and click on upload. - The router will flash and reboot itself into openwrt from UBI 4. Restoring and going back to Zyxel firmware. - Use the ZHAL> command line to manually swap the boot parition to UBI2 with the following: atbt 1 # unlock write atsw # swap boot partition atsr # reboot the router - You will boot again the Zyxel firmware you have into UBI2 and you can flash the zyxel firmware to overwrite the UBI partition and openwrt. Working features ---------------- 3 gbit lan ports Wifi Zyxel partitioning for coexistance with Zloader and dual boot. WAN SFP port (only after exporting pins 57 and 10. gpiobase411) leds reset button serial interface usb port lan ethernet 2.5 gbit port (autosense) wan ethernet 2.5 gbit port (autosense) Not working ---------------- voip (missing drivers or proper zyxel platform software) Swapping the wan ethernet/sfp xor port ---------------- The way to swap the wan port between sfp and ethernet is the following: export the pins 57 and 10. Pin 57 is used to probe if an sfp is present. If pin 57 value is 0 it means that an sfp is present into the cage (cat /sys/class/gpio/gpio468/value). If pin 57 value is 1 it means that no sfp is inserted into the cage. In conclusion by default both 57 an 10 pins are by default 1, which means that the active port is the ethernet one. After inserting an SFP pin 57 will become 0 and you have to manually change the value of pin 10 to 0 too. This is totally scriptable of course. Leds description ------------ All the leds are working out of the box but the leds managed by the 2 maxlinear phy (phy 5 lan, phy6 wan). To activate the phy5 led (rj45 ethernet port led on the back of the router) you have to use mdio-tools. To activate the phy6 led (led on the front of the router for 2.5gbit link) you have to use mdio-tools. Example: Set lan5 led to fast blink on 2500/1000, slow blink on 10/100: mdio mdio-bus mmd 5:30 raw 0x0001 0x33FC Set wan 2.5gbit led to constant on when wan is 2.5gbit: mdio mdio-bus mmd 6:30 raw 0x0001 0x0080 Signed-off-by: Pietro Ameruoso <p.ameruoso@live.it> (cherry picked from commit 1c05388ab04c934ec240e8362321908f91381a90) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: add support for D-Link DIR-859 A3Shiji Yang2023-05-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SOC: QCA9563 775 MHz + QCA9880 Switch: QCA8337N-AL3C RAM: Winbond W9751G6KB-25 64 MiB Flash: Winbond W25Q128FVSG 16 MiB WLAN: Wi-Fi4 2.4 GHz 3*3 + 5 GHz 3*3 LAN: LAN ports *4 WAN: WAN port *1 Buttons: reset *1 + wps *1 LEDs: ethernet *5, power, wlan, wps MAC Address: use address source1 source2 label 40:9b:xx:xx:xx:3c lan && wlan u-boot,env@ethaddr lan 40:9b:xx:xx:xx:3c devdata@0x3f $label wan 40:9b:xx:xx:xx:3f devdata@0x8f $label + 3 wlan2g 40:9b:xx:xx:xx:3c devdata@0x5b $label wlan5g 40:9b:xx:xx:xx:3e devdata@0x76 $label + 2 Install via Web UI: Apply factory image in the stock firmware's Web UI. Install via Emergency Room Mode: DIR-859 A1 will enter recovery mode when the system fails to boot or press reset button for about 10 seconds. First, set computer IP to 192.168.0.5 and Gateway to 192.168.0.1. Then we can open http://192.168.0.1 in the web browser to upload OpenWrt factory image or stock firmware. Some modern browsers may need to turn on compatibility mode. Signed-off-by: Shiji Yang <yangshiji66@qq.com> (cherry picked from commit 0ffbef9317a1dc049ad259c1ec1530355efc0552) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: improve support for D-Link DIR-8x9 A1 seriesShiji Yang2023-05-241-0/+2
| | | | | | | | | | | | | | | | 1. Remove unnecessary new lines in the dts. 2. Remove duplicate included file "gpio.h" in the device dts. 3. Add missing button labels "reset" and "wps". 4. Unify the format of the reg properties. 5. Add u-boot environment support. 6. Reduce spi clock frequency since the max value suggested by the chip datasheet is only 25 MHz. 7. Add seama header fixup for DIR-859 A1. Without this header fixup, u-boot checksum for kernel will fail after the first boot. Signed-off-by: Shiji Yang <yangshiji66@qq.com> (cherry picked from commit e5d8739aa846db621b6368ba83db17c353a35dea) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uml: exclude some /arch/x86 optimizationsChristian Lamparter2023-05-241-0/+6
| | | | | | | | | | | | | The x86_64 UML target wants to include SSSE3 optimized crypto code which lives under /arch/x86/crypto. However, these are not built and this causes an error. | ERROR: module '[...]/arch/x86/crypto/sha512-ssse3.ko' is missing. | make[3]: *** [modules/crypto.mk:990: [...]/kmod-crypto-sha512_5.15.112-1_x86_64.ipk] Error 1 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 959563fb813890e478bf0a51523cd84d54b9af91) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: brcm: drop brcmfmac patch waiting for register_wiphy()Rafał Miłecki2023-05-242-65/+1
| | | | | | | | | | | | | | | | That was a workaround for OpenWrt generation of config files. This patch was used to postpone returning from probe function until loading firmware and calling register_wiphy(). All of that is not needed anymore thanks to the ieee80211 hotplug.d script introduced in the commit 5f8f8a366136 ("base-files, mac80211, broadcom-wl: wifi detection and configuration"). That takes care of generating /etc/config/wireless entries even if wireless device appears late in the booting process. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit bd262663142e90f64f1c256b3e6b2b979c1022c0) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: qca-ssdk: backport support for building as kernel moduleRobert Marko2023-05-234-2/+340
| | | | | | | | | | | | | | | Currently, SSDK is rather special in the sense that its not being built as a proper out of tree module at all but rather like a userspace application and that involves a lot of make magic which unfortunately broke with make version 4.4 and newer. Luckily QCA finally added a way to build SSDK as an out of tree module and it uses the kernel buildsystem which makes it compile with make 4.4 as well. So lets backport the support for it and switch to using it. Signed-off-by: Robert Marko <robimarko@gmail.com> (cherry picked from commit 957f1ee85eb243c5c7397b1e3842a3c61a6b852f)
* OpenWrt v23.05: set branch defaultsChristian Marangi2023-05-211-1/+1
| | | | Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* firmware: intel-microcode: update to 20230512Christian Lamparter2023-05-211-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Debian changelog: intel-microcode (3.20230512.1) unstable; urgency=medium * New upstream microcode datafile 20230512 (closes: #1036013) * Includes fixes or mitigations for an undisclosed security issue * New microcodes: sig 0x000906a4, pf_mask 0x40, 2022-10-12, rev 0x0004, size 115712 sig 0x000b06e0, pf_mask 0x01, 2022-12-19, rev 0x0010, size 134144 * Updated microcodes: sig 0x00050653, pf_mask 0x97, 2022-12-21, rev 0x1000171, size 36864 sig 0x00050654, pf_mask 0xb7, 2022-12-21, rev 0x2006f05, size 44032 sig 0x00050656, pf_mask 0xbf, 2022-12-21, rev 0x4003501, size 37888 sig 0x00050657, pf_mask 0xbf, 2022-12-21, rev 0x5003501, size 37888 sig 0x0005065b, pf_mask 0xbf, 2022-12-21, rev 0x7002601, size 29696 sig 0x000606a6, pf_mask 0x87, 2022-12-28, rev 0xd000390, size 296960 sig 0x000706e5, pf_mask 0x80, 2022-12-25, rev 0x00ba, size 113664 sig 0x000806a1, pf_mask 0x10, 2023-01-13, rev 0x0033, size 34816 sig 0x000806c1, pf_mask 0x80, 2022-12-28, rev 0x00aa, size 110592 sig 0x000806c2, pf_mask 0xc2, 2022-12-28, rev 0x002a, size 97280 sig 0x000806d1, pf_mask 0xc2, 2022-12-28, rev 0x0044, size 102400 sig 0x000806e9, pf_mask 0xc0, 2022-12-26, rev 0x00f2, size 105472 sig 0x000806e9, pf_mask 0x10, 2023-01-02, rev 0x00f2, size 105472 sig 0x000806ea, pf_mask 0xc0, 2022-12-26, rev 0x00f2, size 105472 sig 0x000806eb, pf_mask 0xd0, 2022-12-26, rev 0x00f2, size 105472 sig 0x000806ec, pf_mask 0x94, 2022-12-26, rev 0x00f6, size 105472 sig 0x000806f8, pf_mask 0x87, 2023-03-13, rev 0x2b000461, size 564224 sig 0x000806f7, pf_mask 0x87, 2023-03-13, rev 0x2b000461 sig 0x000806f6, pf_mask 0x87, 2023-03-13, rev 0x2b000461 sig 0x000806f5, pf_mask 0x87, 2023-03-13, rev 0x2b000461 sig 0x000806f4, pf_mask 0x87, 2023-03-13, rev 0x2b000461 sig 0x000806f8, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1, size 595968 sig 0x000806f6, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1 sig 0x000806f5, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1 sig 0x000806f4, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1 sig 0x000906a3, pf_mask 0x80, 2023-02-14, rev 0x042a, size 218112 sig 0x000906a4, pf_mask 0x80, 2023-02-14, rev 0x042a sig 0x000906e9, pf_mask 0x2a, 2022-12-26, rev 0x00f2, size 108544 sig 0x000906ea, pf_mask 0x22, 2023-01-12, rev 0x00f2, size 104448 sig 0x000906eb, pf_mask 0x02, 2022-12-26, rev 0x00f2, size 105472 sig 0x000906ec, pf_mask 0x22, 2023-01-12, rev 0x00f2, size 104448 sig 0x000906ed, pf_mask 0x22, 2023-02-05, rev 0x00f8, size 104448 sig 0x000a0652, pf_mask 0x20, 2022-12-27, rev 0x00f6, size 96256 sig 0x000a0653, pf_mask 0x22, 2023-01-01, rev 0x00f6, size 97280 sig 0x000a0655, pf_mask 0x22, 2022-12-26, rev 0x00f6, size 96256 sig 0x000a0660, pf_mask 0x80, 2022-12-26, rev 0x00f6, size 97280 sig 0x000a0661, pf_mask 0x80, 2022-12-26, rev 0x00f6, size 96256 sig 0x000a0671, pf_mask 0x02, 2022-12-25, rev 0x0058, size 103424 sig 0x000b0671, pf_mask 0x32, 2023-02-06, rev 0x0113, size 207872 sig 0x000b06a2, pf_mask 0xc0, 2023-02-22, rev 0x4112, size 212992 sig 0x000b06a3, pf_mask 0xc0, 2023-02-22, rev 0x4112 * source: update symlinks to reflect id of the latest release, 20230512 -- Henrique de Moraes Holschuh <hmh@debian.org> Tue, 16 May 2023 00:13:02 -0300 intel-microcode (3.20230214.1) unstable; urgency=medium * Non-maintainer upload. * New upstream microcode datafile 20230214 - Includes Fixes for: (Closes: #1031334) - INTEL-SA-00700: CVE-2022-21216 - INTEL-SA-00730: CVE-2022-33972 - INTEL-SA-00738: CVE-2022-33196 - INTEL-SA-00767: CVE-2022-38090 * New Microcodes: sig 0x000806f4, pf_mask 0x10, 2022-12-19, rev 0x2c000170 sig 0x000806f4, pf_mask 0x87, 2022-12-27, rev 0x2b000181 sig 0x000806f5, pf_mask 0x10, 2022-12-19, rev 0x2c000170 sig 0x000806f5, pf_mask 0x87, 2022-12-27, rev 0x2b000181 sig 0x000806f6, pf_mask 0x10, 2022-12-19, rev 0x2c000170 sig 0x000806f6, pf_mask 0x87, 2022-12-27, rev 0x2b000181 sig 0x000806f7, pf_mask 0x87, 2022-12-27, rev 0x2b000181 sig 0x000806f8, pf_mask 0x10, 2022-12-19, rev 0x2c000170 sig 0x000806f8, pf_mask 0x10, 2022-12-19, rev 0x2c000170, size 600064 sig 0x000806f8, pf_mask 0x87, 2022-12-27, rev 0x2b000181 sig 0x000806f8, pf_mask 0x87, 2022-12-27, rev 0x2b000181, size 561152 sig 0x000b06a2, pf_mask 0xc0, 2022-12-08, rev 0x410e sig 0x000b06a2, pf_mask 0xc0, 2022-12-08, rev 0x410e, size 212992 sig 0x000b06a3, pf_mask 0xc0, 2022-12-08, rev 0x410e * Updated Microcodes: sig 0x00050653, pf_mask 0x97, 2022-08-30, rev 0x1000161, size 36864 sig 0x00050656, pf_mask 0xbf, 2022-08-26, rev 0x4003303, size 37888 sig 0x00050657, pf_mask 0xbf, 2022-08-26, rev 0x5003303, size 37888 sig 0x0005065b, pf_mask 0xbf, 2022-08-26, rev 0x7002503, size 29696 sig 0x000606a6, pf_mask 0x87, 2022-10-09, rev 0xd000389, size 296960 sig 0x000606c1, pf_mask 0x10, 2022-09-23, rev 0x1000211, size 289792 sig 0x000706a1, pf_mask 0x01, 2022-09-16, rev 0x003e, size 75776 sig 0x000706a8, pf_mask 0x01, 2022-09-20, rev 0x0022, size 76800 sig 0x000706e5, pf_mask 0x80, 2022-08-31, rev 0x00b8, size 113664 sig 0x000806a1, pf_mask 0x10, 2022-09-07, rev 0x0032, size 34816 sig 0x00090672, pf_mask 0x07, 2023-01-04, rev 0x002c sig 0x00090672, pf_mask 0x07, 2023-01-04, rev 0x002c, size 219136 sig 0x00090675, pf_mask 0x07, 2023-01-04, rev 0x002c sig 0x000906a3, pf_mask 0x80, 2023-01-11, rev 0x0429 sig 0x000906a3, pf_mask 0x80, 2023-01-11, rev 0x0429, size 218112 sig 0x000906a4, pf_mask 0x80, 2023-01-11, rev 0x0429 sig 0x000906c0, pf_mask 0x01, 2022-09-02, rev 0x24000024, size 20480 sig 0x000a0671, pf_mask 0x02, 2022-08-31, rev 0x0057, size 103424 sig 0x000b0671, pf_mask 0x32, 2022-12-19, rev 0x0112, size 207872 sig 0x000b06f2, pf_mask 0x07, 2023-01-04, rev 0x002c sig 0x000b06f5, pf_mask 0x07, 2023-01-04, rev 0x002c -- Tobias Frost <tobi@debian.org> Sun, 12 Mar 2023 18:16:50 +0100 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: disable IGD (video DRM) supportPhilip Prindeville2023-05-211-1/+3
| | | | | | | | | | | | | IGD is only useful when accelerating a VM guest that wants to direct render to memory in the host's framebuffer, but since OpenWrt typically runs on headless hardware, this serves no purpose. Also build vfio with VFIO_NOIOMMU undefined (to get all of the code enabled), but allow it to be enabled via boot-time modparams settings (or at run-time via sysfs writes to "/sys/module/vfio/parameters/enable_unsafe_noiommu_mode". Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* dropbear: add ForceCommand uci optionNozomi Miyamori2023-05-201-0/+2
| | | | | | | | adds ForceCommand option. If the command is specified, it forces users to execute the command when they log in. Signed-off-by: Nozomi Miyamori <inspc43313@yahoo.co.jp> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* tfa-layerscape: fix fiptool's buildChristian Lamparter2023-05-202-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | A missing '\' caused the remaining parameters not to be passed to make. This fixes the following error: | gcc -c [...] fiptool.c -o fiptool.o | In file included from fiptool.h:16, | from fiptool.c:19: |fiptool_platform.h:19:11: fatal error: openssl/sha.h: No such file or directory | 19 | # include <openssl/sha.h> | | ^~~~~~~~~~~~~~~ |compilation terminated. |make[3]: *** [Makefile:58: fiptool.o] Error 1 as the HOST_CFLAGS are no longer passed. then, HOST_CFLAGS is specified as a command argument, this is a specific problem of our built since appending these needs the override directive. Fixes: df28bfe03247 ("tfa-layerscape: Change to github and use the latest tag") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* nettle: update to 3.9Nick Hainke2023-05-202-7/+7
| | | | | | | | | | Changelog: https://git.lysator.liu.se/nettle/nettle/-/blob/26cd0222fd09b8f5dc0edba30d6908722c7e9b09/NEWS Refresh patch: - 100-portability.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* tfa-layerscape: Change to github and use the latest tagWojciech Dubowik2023-05-204-37/+265
| | | | | | | | | | | | | | The default location of tfa-layerscape has been changed from codeuaurora to github. Also use the latest tag for Layerscape Linux Development POC from NXP. v2: * restored ls1021a-afrdm board * added platform defines to fiptool so ls-ddr-phy can be built Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ppfe-firmware: Bump to lf-6.1.1-1.0.0 and switch to githubWojciech Dubowik2023-05-201-5/+5
| | | | | | | | | | | | | The default location of ppfe-firmware has been changed from codeuaurora to github. Also use the latest tag for Layerscape Linux Development POC from NXP. Tested on: * NXP FRWY-LS1012A Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* fman-ucode: Bump to lf-6.1.1-1.0.0 and switch to githubWojciech Dubowik2023-05-201-5/+5
| | | | | | | | | | | | | The default location of fman-ucode has been changed from codeuaurora to github. Also use the latest tag for Layerscape Linux Development POC from NXP. Tested on: * NXP LS1046A-RDB Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uboot-layerscape: Bump to lf-6.1.1-1.0.0 and switch to githubWojciech Dubowik2023-05-203-46/+5
| | | | | | | | | | | | | | | | | The default location of uboot-layerscape has been changed from codeuaurora to github. Also use the latest tag for Layerscape Linux Development POC from NXP. Tested on: * NXP FRWY-LS1012A * NXP LS1028A-RDB * NXP LS1046A-RDB V2: Remove ls1028ardb specifix fixups not needed with new uboot Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ls-rcw: Bump to lf-6.1.1-1.0.0 and switch to githubWojciech Dubowik2023-05-201-5/+5
| | | | | | | | | | | | | | | | The default location of ls-rcw has been changed from codeuaurora to github. The reason is that the old codeaurora source no longer resolves. Also use the latest tag for Layerscape Linux Development POC from NXP. Tested on: * NXP FRWY-LS1012A * NXP LS1046A-RDB Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE, Mention that previous codeaurora source is no longer available) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: net: add support for kernel tlsTiago Gaspar2023-05-201-0/+19
| | | | | | | | | | Add ktls (Kernel TLS) kmods to enable TLS support in kernel (allowing TLS offload when the network card supports it) Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com> (added disabled symbols) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* pcre2: switch to Github Releases and bump to 10.42Linhui Liu2023-05-201-4/+4
| | | | | | | | | The mirror at SourceForge is an unofficial mirror and no longer maintained. ChangeLogs: https://github.com/PCRE2Project/pcre2/blob/pcre2-10.42/ChangeLog Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* util-linux: Use SYS_getrandom in randutils.cHauke Mehrtens2023-05-192-15/+1
| | | | | | | | | | | The getrandom syscall is not hanging at bootup any more if there is not enough entropy. This was fixed upstream in 2018 in commit: https://github.com/util-linux/util-linux/commit/a9cf659e0508c1f56813a7d74c64f67bbc962538 This OpenWrt patch is not needed any more. This reverts commit e64463ebde55 ("util-linux: avoid using the getrandom syscall") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* util-linux: Fix taskset conflict with busyboxHauke Mehrtens2023-05-191-1/+2
| | | | | | | | | | This fixes the following error: * check_data_file_clashes: Package taskset wants to install file build_dir/target-powerpc_8548_musl/root-mpc85xx/usr/bin/taskset But that file is already provided by package * busybox * opkg_install_cmd: Cannot install package taskset. Fixes: 3c3d797c4dad ("busybox: enable taskset by default") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* libjson-c: import patch to fix compilation on macosNick Hainke2023-05-192-1/+185
| | | | | | | | | | | | | | Fixes errors in the form of: /Users/user/src/openwrt/openwrt/build_dir/hostpkg/json-c-0.16/json_util.c:63:35: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes] const char *json_util_get_last_err() ^ void 1 error generated. ninja: build stopped: subcommand failed. Reported-by: Paul Spooren <mail@aparcar.org> Suggested-by: Paul Spooren <mail@aparcar.org> Signed-off-by: Nick Hainke <vincent@systemli.org>
* f2fs-tools: update to 1.16.0Nick Hainke2023-05-193-172/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove upstramed patches: - 100-configure.ac-fix-AC_ARG_WITH.patch - 101-configure.ac-fix-cross-compilation.patch Remove deprecated f2fstat tool: https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=77bf7ed29f1dd1341079913f3b36fc62f812c4f5 Changelog: 06c027a f2fs-tools: upgrade version 1.16.0 542cc57 fsck.f2fs: fix sanity check logic for cp_payload a7df89e mkfs.f2fs: remove indentation c82985a fsck.f2fs: don't call report_zone on normal partition 0ac168e f2fs-tools: relax zone size of power of 2 641be32 mkfs.f2fs: trim all the devices except the first one 3835fef f2fs-tools: fix # of total segments 5b08ca9 f2fs_io: support AES_256_HCTR2 ae3301c f2fs_io: Fix out of tree builds ddbde27 fsck.f2fs: relocate chksum verification step during f2fs_do_mount() 77bf7ed f2fs-tools: Remove deprecated f2fstat fb6575e Remove sg_write_buffer 1bb669e fsck.f2fs: avoid uncessary recalculation ccd2361 fsck.f2fs: fix potential overflow of copying i_name cd6b133 fsck.f2fs: add parentheses for SB_MASK 399600a dump.f2fs: remove unavailable option -g 3e6e178 f2fs-tools: define HAVE_CLOCK_GETTIME properly 907b972 f2fs-tools: support F2FS_IOC_START_ATOMIC_REPLACE 9ff70fb f2fs-tools: give less overprovisioning space 844f821 f2fs-tools: set host-aware zoned device similar to host-managed one 88ac76d fsck.f2fs: fix missing to assign c.zoned_model 8cbe34e fsck.f2fs: trigger repairing if filesystem has inconsistent errors 2f1dde2 fsck.f2fs: trigger repairing if filesystem was forced to stop 465159f fsck.f2fs: export valid image size 3486b62 mkfs.f2fs: update allocation policy for ro feature bdd51e5 fsck.f2fs: fix __end_block_addr() 5a5e419 Always use sparse/sparse.h when building for Android 19f77c6 f2fs-tools: fix build error on lz4-1.9.4 986c1f1 Fix format strings in log messages 0d6acbe fsck.f2fs: use elapsed_time in checkpoint for period check 9b7a4c5 mkfs.f2fs: catch total_zones=0 instead of crashing 6148db3 f2fs-tools: use F2FS_BLKSIZE instead of PAGE_*_SIZE f09c2b7 f2fs_io: support triggering filesystem GC via ioctl 32e7d27 configure.ac: fix cross compilation 65fe94e configure.ac: fix AC_ARG_WITH 6325cf7 Use F2FS_BLKSIZE as the size of struct f2fs_summary_block c89be7a Use F2FS_BLKSIZE for dev_read_block() buffers 5317d18 Improve compile-time type checking for f2fs_report_zone() 92e2e52 Fix f2fs_report_zone() 648a491 Fix the struct f2fs_dentry_block definition c964547 resize.f2fs: add option to manually specify new overprovision a741438 fsck.f2fs: drop compression bit if inline_data is set 406b1c9 f2fs-tools: fix cannot get bdev information 9d0cb9e f2fs_io: add dsync option for write a7b8b46 tools: fix file too large causing overflow bddca6f dump.f2fs: add -I nid to dump inode by scan full disk ebc3879 android_config: add time headers c1144bf Check fallthrough in mount.h for Mac bcb9929 avoid unnecessary function 7d902f4 Fix dependencies on linux/blkzoned.h when using Bionic. 274abbb Remove unnecessary config.h 8c97ab3 libzone: remove duplicate header adcec10 Support zoned device if libc exists efc2bc7 mkfs.f2fs: fix typo 3034a41 mkfs.f2fs: split unused parameter dd8d8e5 f2fs-tools: do not use SG_IO in Android 4f216e6 f2fs-tools: move android_config before defining them 48c5dbb f2fscrypt: adjust config file first 4b55459 android_config: add missing uuid library Signed-off-by: Nick Hainke <vincent@systemli.org>
* util-linux: Fix build on powerpc and arcHauke Mehrtens2023-05-191-3/+15
| | | | | | | | | This fixes the build of util-linux on powerpc and arc. Both CPU architectures were not supported here in addition to the missing MIPS support. Fixes: 628a410ed149 ("util-linux: update to 2.39") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: other: adjust paths for new locationJohn Audia2023-05-181-2/+2
| | | | | | | | | This upstream commit[1] moves drivers/bus/mhi/core/ to drivers/bus/mhi/host/ so we need to correct for that here. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.112&id=9fbf10148f31a63b6d8c2b0e56cb97eb173d600b Signed-off-by: John Audia <therealgraysky@proton.me>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 14:00:38 +0000