aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* base-files: fix nand sysupgrade commentsRodrigo Balerdi2022-04-191-3/+3
| | | | | | Erroneous comments possibly applied to an earlier code revision. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: improve sysupgrade ubiblock handlingRodrigo Balerdi2022-04-191-16/+18
| | | | | | Only remove ubiblock devices required for nand sysupgrade. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: emit diagnostics on sysupgrade abortRodrigo Balerdi2022-04-191-11/+16
| | | | | | | Emit diagnostics if nand sysupgrade is aborted because UBI partition cannot be attached. Also avoid redudndant checks. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* mac80211: fix QCA9561 PA biasThibaut VARÈNE2022-04-181-0/+47
| | | | | | | | | | | | | | This patch fixes an invalid TX PA DC bias level on QCA9561, which results in a very low output power and very low throughput as devices are further away from the AP (compared to other 2.4GHz APs), following a suggestion from nbd[1]. This patch has been submitted upstream[2]. [1] https://lore.kernel.org/all/91c58969-c60e-2f41-00ac-737786d435ae@nbd.name [2] https://lore.kernel.org/linux-wireless/20220417145145.1847-1-hacks+kernel@slashdirt.org/ Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* linux-firmware: Update to version 20220411Hauke Mehrtens2022-04-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following files used in OpenWrt changed: amd64-microcode/lib/firmware/amd-ucode/microcode_amd_fam17h.bin amd64-microcode/lib/firmware/amd-ucode/microcode_amd_fam19h.bin amdgpu-firmware/lib/firmware/amdgpu/aldebaran_mec.bin amdgpu-firmware/lib/firmware/amdgpu/aldebaran_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/aldebaran_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/aldebaran_sdma.bin amdgpu-firmware/lib/firmware/amdgpu/aldebaran_smc.bin amdgpu-firmware/lib/firmware/amdgpu/aldebaran_sos.bin amdgpu-firmware/lib/firmware/amdgpu/aldebaran_ta.bin amdgpu-firmware/lib/firmware/amdgpu/aldebaran_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/arcturus_sdma.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_ce.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_dmcub.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_me.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_mec.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_sdma.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_smc.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_sos.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_ta.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/cyan_skillfish2_ce.bin amdgpu-firmware/lib/firmware/amdgpu/cyan_skillfish2_me.bin amdgpu-firmware/lib/firmware/amdgpu/cyan_skillfish2_mec.bin amdgpu-firmware/lib/firmware/amdgpu/cyan_skillfish2_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/cyan_skillfish2_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/dcn_3_1_6_dmcub.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_ce.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_dmcub.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_me.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_mec.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_sdma.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_smc.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_sos.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_ta.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_ce.bin amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_me.bin amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_mec.bin amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_asd.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_ce.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_dmcub.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_me.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_mec.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_ta.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_asd.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_ce.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_me.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_mec.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_sos.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_ta.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/navi12_asd.bin amdgpu-firmware/lib/firmware/amdgpu/navi12_sdma.bin amdgpu-firmware/lib/firmware/amdgpu/navi12_sdma1.bin amdgpu-firmware/lib/firmware/amdgpu/navi12_sos.bin amdgpu-firmware/lib/firmware/amdgpu/navi12_ta.bin amdgpu-firmware/lib/firmware/amdgpu/navi12_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/navi14_asd.bin amdgpu-firmware/lib/firmware/amdgpu/navi14_smc.bin amdgpu-firmware/lib/firmware/amdgpu/navi14_sos.bin amdgpu-firmware/lib/firmware/amdgpu/navi14_ta.bin amdgpu-firmware/lib/firmware/amdgpu/navi14_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_ce.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_dmcub.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_me.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_mec.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_sdma.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_smc.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_sos.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_ta.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/picasso_asd.bin amdgpu-firmware/lib/firmware/amdgpu/picasso_ce.bin amdgpu-firmware/lib/firmware/amdgpu/picasso_me.bin amdgpu-firmware/lib/firmware/amdgpu/picasso_mec.bin amdgpu-firmware/lib/firmware/amdgpu/picasso_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/picasso_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/picasso_ta.bin amdgpu-firmware/lib/firmware/amdgpu/picasso_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/psp_13_0_8_asd.bin amdgpu-firmware/lib/firmware/amdgpu/psp_13_0_8_ta.bin amdgpu-firmware/lib/firmware/amdgpu/psp_13_0_8_toc.bin amdgpu-firmware/lib/firmware/amdgpu/raven2_asd.bin amdgpu-firmware/lib/firmware/amdgpu/raven2_ce.bin amdgpu-firmware/lib/firmware/amdgpu/raven2_me.bin amdgpu-firmware/lib/firmware/amdgpu/raven2_mec.bin amdgpu-firmware/lib/firmware/amdgpu/raven2_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/raven2_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/raven2_ta.bin amdgpu-firmware/lib/firmware/amdgpu/raven2_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/raven_asd.bin amdgpu-firmware/lib/firmware/amdgpu/raven_ce.bin amdgpu-firmware/lib/firmware/amdgpu/raven_me.bin amdgpu-firmware/lib/firmware/amdgpu/raven_mec.bin amdgpu-firmware/lib/firmware/amdgpu/raven_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/raven_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/raven_ta.bin amdgpu-firmware/lib/firmware/amdgpu/raven_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_asd.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_ce.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_dmcub.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_me.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_mec.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_ta.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/sdma_5_2_7.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_ce.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_dmcub.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_me.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_mec.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_sdma.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_smc.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_sos.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_ta.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/vangogh_asd.bin amdgpu-firmware/lib/firmware/amdgpu/vangogh_ce.bin amdgpu-firmware/lib/firmware/amdgpu/vangogh_me.bin amdgpu-firmware/lib/firmware/amdgpu/vangogh_mec.bin amdgpu-firmware/lib/firmware/amdgpu/vangogh_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/vangogh_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/vega10_asd.bin amdgpu-firmware/lib/firmware/amdgpu/vega10_ce.bin amdgpu-firmware/lib/firmware/amdgpu/vega10_me.bin amdgpu-firmware/lib/firmware/amdgpu/vega10_mec.bin amdgpu-firmware/lib/firmware/amdgpu/vega10_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/vega10_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/vega12_asd.bin amdgpu-firmware/lib/firmware/amdgpu/vega12_ce.bin amdgpu-firmware/lib/firmware/amdgpu/vega12_me.bin amdgpu-firmware/lib/firmware/amdgpu/vega12_mec.bin amdgpu-firmware/lib/firmware/amdgpu/vega12_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/vega12_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/vega20_asd.bin amdgpu-firmware/lib/firmware/amdgpu/vega20_ce.bin amdgpu-firmware/lib/firmware/amdgpu/vega20_me.bin amdgpu-firmware/lib/firmware/amdgpu/vega20_mec.bin amdgpu-firmware/lib/firmware/amdgpu/vega20_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/vega20_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_asd.bin amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_ce.bin amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_me.bin amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_mec.bin amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_ta.bin ibt-firmware/lib/firmware/intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq iwlwifi-firmware-ax210/lib/firmware/iwlwifi-ty-a0-gf-a0.pnvm iwlwifi-firmware-iwl9260/lib/firmware/iwlwifi-9260-th-b0-jf-b0-46.ucode iwlwifi-firmware-iwl9000/lib/firmware/iwlwifi-9000-pu-b0-jf-b0-46.ucode Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "mac80211 adjust QCA9561 PA bias"Petr Štetiar2022-04-171-18/+0
| | | | | | | | | | | | | | | This reverts commit f9ff282d17ec652d63fa2404e47bb0e15ed95b69 as during upstream patch review process nbd pointed out, that this patch needs more work: "The patch looks wrong to me. I'm pretty sure that AR_CH0_TOP2 is the correct register, the definition has an explicit check for 9561 as well. I believe this patch works by accident because it avoids writing a wrong value to that register." 1. https://lore.kernel.org/all/91c58969-c60e-2f41-00ac-737786d435ae@nbd.name Signed-off-by: Petr Štetiar <ynezz@true.cz>
* realtek: add ZyXEL GS1900-24HP v1 supportMartin Kennedy2022-04-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-24HP v1 is a 24 port PoE switch with two SFP ports, similar to the other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-24HP v1 * SoC: Realtek RTL8382M 500 MHz MIPS 4KEc * Flash: 16 MiB * RAM: Winbond W9751G8KB-25 64 MiB DDR2 SDRAM * Ethernet: 24x 10/100/1000 Mbps, 2x SFP 100/1000 Mbps * LEDs: * 1 PWR LED (green, not configurable) * 1 SYS LED (green, configurable) * 24 ethernet port link/activity LEDs (green, SoC controlled) * 24 ethernet port PoE status LEDs * 2 SFP status/activity LEDs (green, SoC controlled) * Buttons: * 1 "RESET" button on front panel (soft reset) * 1 button ('SW1') behind right hex grate (hardwired power-off) * PoE: * Management MCU: ST Micro ST32F100 Microcontroller * 6 BCM59111 PSE chips * 170W power budget * Power: 120-240V AC C13 * UART: Internal populated 10-pin header ('J5') providing RS232; connected to SoC UART through a TI or SIPEX 3232C for voltage level shifting. * 'J5' RS232 Pinout (dot as pin 1): 2) SoC RXD 3) GND 10) SoC TXD Serial connection parameters: 115200 8N1. Installation ------------ OEM upgrade method: * Log in to OEM management web interface * Navigate to Maintenance > Firmware > Management * If "Active Image" has the first option selected, OpenWrt will need to be flashed to the "Active" partition. If the second option is selected, OpenWrt will need to be flashed to the "Backup" partition. * Navigate to Maintenance > Firmware > Upload * Upload the openwrt-realtek-rtl838x-zyxel_gs1900-24hp-v1-initramfs-kernel.bin file by your preferred method to the previously determined partition. When prompted, select to boot from the newly flashed image, and reboot the switch. * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade /tmp/openwrt-realtek-rtl838x-zyxel_gs1900-24hp-v1-squashfs-sysupgrade.bin U-Boot TFTP method: * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-24HP v1 is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only be installed in the first partition anyway (hardcoded in the DTS). To ensure we are set to boot from the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x81f00000 192.168.1.10:openwrt-realtek-rtl838x-zyxel_gs1900-24hp-v1-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade /tmp/openwrt-realtek-rtl838x-zyxel_gs1900-24hp-v1-squashfs-sysupgrade.bin Signed-off-by: Martin Kennedy <hurricos@gmail.com> [Add info on PoE hardware to commit message] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ath79: add support for Sophos AP100/AP55 familyAndrew Powers-Holmes2022-04-161-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Sophos AP100, AP100C, AP55, and AP55C are dual-band 802.11ac access points based on the Qualcomm QCA9558 SoC. They share PCB designs with several devices that already have partial or full support, most notably the Devolo DVL1750i/e. The AP100 and AP100C are hardware-identical to the AP55 and AP55C, however the 55 models' ART does not contain calibration data for their third chain despite it being present on the PCB. Specifications common to all models: - Qualcomm QCA9558 SoC @ 720 MHz (MIPS 74Kc Big-endian processor) - 128 MB RAM - 16 MB SPI flash - 1x 10/100/1000 Mbps Ethernet port, 802.3af PoE-in - Green and Red status LEDs sharing a single external light-pipe - Reset button on PCB[1] - Piezo beeper on PCB[2] - Serial UART header on PCB - Alternate power supply via 5.5x2.1mm DC jack @ 12 VDC Unique to AP100 and AP100C: - 3T3R 2.4GHz 802.11b/g/n via SoC WMAC - 3T3R 5.8GHz 802.11a/n/ac via QCA9880 (PCI Express) AP55 and AP55C: - 2T2R 2.4GHz 802.11b/g/n via SoC WMAC - 2T2R 5.8GHz 802.11a/n/ac via QCA9880 (PCI Express) AP100 and AP55: - External RJ45 serial console port[3] - USB 2.0 Type A port, power controlled via GPIO 11 Flashing instructions: This firmware can be flashed either via a compatible Sophos SG or XG firewall appliance, which does not require disassembling the device, or via the U-Boot console available on the internal UART header. To flash via XG appliance: - Register on Sophos' website for a no-cost Home Use XG firewall license - Download and install the XG software on a compatible PC or virtual machine, complete initial appliance setup, and enable SSH console access - Connect the target AP device to the XG appliance's LAN interface - Approve the AP from the XG Web UI and wait until it shows as Active (this can take 3-5 minutes) - Connect to the XG appliance over SSH and access the Advanced Console (Menu option 5, then menu option 3) - Run `sudo awetool` and select the menu option to connect to an AP via SSH. When prompted to enable SSH on the target AP, select Yes. - Wait 2-3 minutes, then select the AP from the awetool menu again. This will connect you to a root shell on the target AP. - Copy the firmware to /tmp/openwrt.bin on the target AP via SCP/TFTP/etc - Run `mtd -r write /tmp/openwrt.bin astaro_image` - When complete, the access point will reboot to OpenWRT. To flash via U-Boot serial console: - Configure a TFTP server on your PC, and set IP address 192.168.99.8 with netmask 255.255.255.0 - Copy the firmware .bin to the TFTP server and rename to 'uImage_AP100C' - Open the target AP's enclosure and locate the 4-pin 3.3V UART header [4] - Connect the AP ethernet to your PC's ethernet port - Connect a terminal to the UART at 115200 8/N/1 as usual - Power on the AP and press a key to cancel autoboot when prompted - Run the following commands at the U-Boot console: - `tftpboot` - `cp.b $fileaddr 0x9f070000 $filesize` - `boot` - The access point will boot to OpenWRT. MAC addresses as verified by OEM firmware: use address source LAN label config 0x201a (label) 2g label + 1 art 0x1002 (also found at config 0x2004) 5g label + 9 art 0x5006 Increments confirmed across three AP55C, two AP55, and one AP100C. These changes have been tested to function on both current master and 21.02.0 without any obvious issues. [1] Button is present but does not alter state of any GPIO on SoC [2] Buzzer and driver circuitry is present on PCB but is not connected to any GPIO. Shorting an unpopulated resistor next to the driver circuitry should connect the buzzer to GPIO 4, but this is unconfirmed. [3] This external RJ45 serial port is disabled in the OEM firmware, but works in OpenWRT without additional configuration, at least on my three test units. [4] On AP100/AP55 models the UART header is accessible after removing the device's top cover. On AP100C/AP55C models, the PCB must be removed for access; three screws secure it to the case. Pin 1 is marked on the silkscreen. Pins from 1-4 are 3.3V, GND, TX, RX Signed-off-by: Andrew Powers-Holmes <andrew@omnom.net>
* ramips: add support for BOLT! ArionAbdul Aziz Amar2022-04-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device is from now-defunct BOLT! ISP in Indonesia. The original firmware is based on mediatek SDK running linux 2.6 or 3.x in later revision. Specifications: - SoC: MediaTek MT7621 - Flash: 32 MiB NOR SPI - RAM: 128 MiB DDR3 - Ethernet: 2x 10/100/1000 Mbps (switched, LAN + WAN) - WIFI0: MT7603E 2.4GHz 802.11b/g/n - WIFI1: MT7612E 5GHz 802.11ac - Antennas: 2x internal, non-detachable - LEDs: Programmable LEDs: 5 blue LEDs (wlan, tel, sig1-3) and 2 red LEDs (wlan and sig1) Non-programmable "Power" LED - Buttons: Reset and WPS Instalation: Install from TFTP Set your PC IP to 10.10.10.3 and gateway to 10.10.10.123 Press "1" when turning on the router, and type the initramfs file name You also need to solder pin header or cable to J4 or neighboring test points (T19-T21) Pinouts from top to bottom: GND, TX, RX, VCC (3.3v) Baudrate: 57600n8 There's also an additional gigabit transformer and RTL8211FD managed by the LTE module on the backside of the PCB. Signed-off-by: Abdul Aziz Amar <abdulaziz.amar@gmail.com>
* readline: add host PICRosen Penev2022-04-161-0/+1
| | | | | | | Python seems to fail to link to libreadline properly because of this. Not a fatal error but an error nontheless. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* pcre: pass -fPIC under host as wellRosen Penev2022-04-161-4/+4
| | | | | | static libraries need them as they are not PIC by default. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* comgt: support ZTE MF286R modemCezary Jackiewicz2022-04-162-1/+23
| | | | | | | | | | | | The modem is based on Marvell PXA1826 and uses ACM+RNDIS interface to establish connection with custom commands specific to ZTE modems. Two variants of modems were discovered, some identifying themselves as "ZTE", and others as plain "Marvell", the chipset manufacturer. The modem itself runs a fork of OpenWrt inside, which root shell can be accessed via ADB interface. Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* comgt: ncm: try to detect interface for ttyACM portsLech Perczak2022-04-161-0/+4
| | | | | | | | | | | Some modems expose ttyACM as their control ports, which have the "device" symlink pointing one level down in sysfs tree. Try to find network interfaces for them as well, this is commonly used for modems exposing ACM + RNDIS or ACM + ECM interface combinations. Co-developed-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* comgt: ncm: select first available network interface for deviceLech Perczak2022-04-161-3/+4
| | | | | | | | | | | | | Some modems expose multiple network interfaces on the same USB device, causing the connection setup script to fail, because glob matching in the detection phase causes 'ls' to output more than one interface name plus their base directories in sysfs. Avoid that by listing the directories explicitly and then selecting first available interface. This is the case for some variants of ZTE MF286R built-in modem, which exposes both RNDIS and CDC-ECM network interfaces, causing the connection setup to fail. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* comgt: ncm: allow specification of interface nameLech Perczak2022-04-161-14/+18
| | | | | | | | | | | | Add ifname property to UCI, which can be used to override the autodetected interface name in case the detection fails due to having none or more than one interface exposed by the modem, which is not explicitly linked to TTY port. This is needed on certain variants of ZTE MF286R built-in modem, which exposes both RNDIS and CDC-ECM interfaces on the modem, on which the automatic detection may select the wrong network interface. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: add support for Yuncore A930Thibaut VARÈNE2022-04-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - QCA9533 (650 MHz), 64 or 128MB RAM, 16MB SPI NOR - 2x 10/100 Mbps Ethernet, with 802.3at PoE support (WAN) - 2T2R 802.11b/g/n 2.4GHz Flash instructions: If your device comes with generic QSDK based firmware, you can login over telnet (login: root, empty password, default IP: 192.168.188.253), issue first (important!) 'fw_setenv' command and then perform regular upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download image to the device, SSH server is not available): fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin In case your device runs firmware with YunCore custom GUI, you can use U-Boot recovery mode: 1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with 'tftp' image renamed to 'upgrade.bin' 2. Power the device with reset button pressed and release it after 5-7 seconds, recovery mode should start downloading image from server (unfortunately, there is no visible indication that recovery got enabled - in case of problems check TFTP server logs) Signed-off-by: Clemens Hopfer <openwrt@wireloss.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* mac80211 adjust QCA9561 PA biasThibaut VARÈNE2022-04-151-0/+18
| | | | | | | | | | | | | | | ath9k is setting the TX PA DC bias level different on QCA9561 and QCA9565 although they have the same radio IP-core, which results in a very low output power and very low throughput as devices are further away from the AP (compared to other 2.4GHz APs.) In real life testing, without this patch the 2.4GHz throughput on Yuncore XD3200 is around 10Mbps sitting close to the AP, and close to theoretical maximum with the patch applied. Signed-off-by: Clemens Hopfer <openwrt@wireloss.net> [edit commit message] Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ath79: add support for Yuncore XD3200Thibaut VARÈNE2022-04-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - QCA9563 (775MHz), 128MB RAM, 16MB SPI NOR - 2T2R 802.11b/g/n 2.4GHz - 2T2R 802.11n/ac 5GHz - 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port) LED for 5 GHz WLAN is currently not supported as it is connected directly to the QCA9882 radio chip. Flash instructions: If your device comes with generic QSDK based firmware, you can login over telnet (login: root, empty password, default IP: 192.168.188.253), issue first (important!) 'fw_setenv' command and then perform regular upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download image to the device, SSH server is not available): fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin In case your device runs firmware with YunCore custom GUI, you can use U-Boot recovery mode: 1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with 'tftp' image renamed to 'upgrade.bin' 2. Power the device with reset button pressed and release it after 5-7 seconds, recovery mode should start downloading image from server (unfortunately, there is no visible indication that recovery got enabled - in case of problems check TFTP server logs) Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* kernel: usb-net-asix: fix 5.15 dependencyPetr Štetiar2022-04-151-1/+1
| | | | | | | | | | | | Upstream in commit 34a1dee6bc44 ("net: usb: asix: ax88772: add generic selftest support") in version 5.14 added dependency on generic selftest functionality and armvirt/64 when compiled with ALL_KMODS=y reports following: Package kmod-usb-net-asix is missing dependencies for the following libraries: mdio_devres.ko selftests.ko Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: netdevices: add generic selftests modulePetr Štetiar2022-04-151-0/+16
| | | | | | | | | | Upstream in commit 3e1e58d64c3d ("net: add generic selftest support") in version 5.13 added generic selftests module and usb-net-asix already depends on it, in version 5.18 via commit 1710b52d7c13 ("net: usb: smsc95xx: add generic selftest support") it will be used by usb-net-smsc95xx as well. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: usb-net-smsc95xx: fix 5.15 dependencyPetr Štetiar2022-04-151-1/+1
| | | | | | | | | armvirt/64 when compiled with ALL_KMODS=y reports following: Package kmod-usb-net-smsc95xx is missing dependencies for the following libraries: libphy.ko Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: mdio-devres: fix of-mdio dependencyPetr Štetiar2022-04-151-1/+1
| | | | | | | | | armvirt/64 when compiled with ALL_KMODS=y reports following: Package kmod-mdio-devres is missing dependencies for the following libraries: of_mdio.ko Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: of-mdio: fix 5.15 fwnode_mdio dependencyPetr Štetiar2022-04-151-1/+2
| | | | | | | | | | | | Upstream in commit bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()") in version 5.14 introduced new dependency: Package kmod-of-mdio is missing dependencies for the following libraries: fwnode_mdio.ko Signed-off-by: Petr Štetiar <ynezz@true.cz>
* urandom-seed: go back to seeding with shell script temporarilyJason A. Donenfeld2022-04-145-442/+35
| | | | | | | | | | | | | | | | This reverts commit 2edc017a6e0cb92b72b768aaa46c6d336ad84eff. We shouldn't be using a shell script here, but the SeedRNG integration into OpenWRT requires a bit more thought. Etienne raised some important points immediately after this was merged and planned to send some follow up commits, but became busy with other things. The points he raised are important enough that we should actually back this out until it's ready to go, and then merge it as a cohesive unit. So let's revert this for now, and come back to it later on. Cc: Etienne Champetier <champetier.etienne@gmail.com> Cc: Petr Štetiar <ynezz@true.cz> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* netifd: relax check in dhcp proto handlerDaniel Golle2022-04-131-1/+1
| | | | | | | | | Checking whether /sbin/udhcpc is a symbolic link breaks using the DHCP proto handler inside procd-ujail where bind-mounts are used for the resolved link. Check whether /sbin/udhcpc is executable instead to allow using the proto handler for DHCP-provisioned containers. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to git HEADDaniel Golle2022-04-131-3/+3
| | | | | | | | 6343c3a procd: completely remove tmp-on-zram support 5c5e63f uxc: fix potential NULL-pointer dereference eb03f03 jail: include necessary files for per-netns netifd instance Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: more robust sysupgrade on NANDDaniel Golle2022-04-131-4/+10
| | | | | | | | | Make sure sysupgrade on NAND also works in case of UBI volumes having index >9. While at it, also make sure UBI device is detected and abort in case it isn't. Use Shell built-in shorthand ':' instead of 'true'. Fixes #9708 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* firewall3: bump to latest git HEADRui Salvaterra2022-04-131-3/+3
| | | | | | | 4cd7d4f Revert "firewall3: support table load on access on Linux 5.15+" 50979cc firewall3: remove unnecessary fw3_has_table Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* netfilter: move nf-log modules into separate packagesJo-Philipp Wich2022-04-121-3/+26
| | | | | | | | Both legacy iptables and nftables require nf-log modules for rule logging, so move them into a separate package both firewall implementations can depend on. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mac80211: backport minstrel_ht fix for legacy ratesFelix Fietkau2022-04-121-0/+61
| | | | | | Fixes OFDM rates on 5 GHz Signed-off-by: Felix Fietkau <nbd@nbd.name>
* nftables: add CONFLICT between versionsEneas U de Queiroz2022-04-111-1/+2
| | | | | | Have nftables-json conflict with nftables-nojson. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* wolfssl: bump to 5.2.0Eneas U de Queiroz2022-04-114-9/+7
| | | | | | | | | | | | | | | | Fixes two high-severity vulnerabilities: - CVE-2022-25640: A TLS v1.3 server who requires mutual authentication can be bypassed. If a malicious client does not send the certificate_verify message a client can connect without presenting a certificate even if the server requires one. - CVE-2022-25638: A TLS v1.3 client attempting to authenticate a TLS v1.3 server can have its certificate heck bypassed. If the sig_algo in the certificate_verify message is different than the certificate message checking may be bypassed. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* mac80211: Update to version 5.15.33-1Hauke Mehrtens2022-04-1033-439/+85
| | | | | | | | | | | | | | This updates mac80211 to version 5.15.33-1 which is based on kernel 5.15.33. The removed patches were applied upstream. This new release contains many fixes which were merged into the upstream Linux kernel. This also contains the following new drivers which are needed for ath11k: * net/qrtr/ * drivers/bus/mhi/ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arm-trusted-firmware-mediatek: remove no longer needed Configure stepDaniel Golle2022-04-091-4/+0
| | | | | | | | As anyway only the default is called now we can as well also just remove the override for Build/Configure. Fixes: e2cffbb805 ("arm-trusted-firmware-mediatek: update to 2021-03-10") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mwlwifi: fix 5.15 kernel supportRobert Marko2022-04-094-1/+103
| | | | | | | | Fix compilation and usage under kernel 5.15 for the mwlwifi driver. For detailed description of changes, check individual patches. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* dropbear: bump to 2022.82Konstantin Demin2022-04-099-66/+90
| | | | | | | | | | | | | | | | | | | | | | - update dropbear to latest stable 2022.82; for the changes see https://matt.ucc.asn.au/dropbear/CHANGES - use $(AUTORELEASE) in PKG_RELEASE - use https for all uris - refresh all patches - rewrite patches: - 100-pubkey_path.patch - 130-ssh_ignore_x_args.patch binary/pkg size changes: - ath79/generic, mips: - binary: 215112 -> 219228 (+4116) - pkg: 111914 -> 113404 (+1490) - ath79/tiny, mips: - binary: 172501 -> 172485 (-16) - pkg: 89871 -> 90904 (+1033) Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
* libmnl: update to 1.0.5Nick Hainke2022-04-091-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: Duncan Roe (5): nlmsg: Fix a missing doxygen section trailer build: doc: "make" builds & installs a full set of man pages build: doc: get rid of the need for manual updating of Makefile build: If doxygen is not available, be sure to report "doxygen: no" to ./configure src: doc: Fix messed-up Netlink message batch diagram Fernando Fernandez Mancera (1): src: fix doxygen function documentation Florian Westphal (1): libmnl: zero attribute padding Guillaume Nault (1): callback: mark cb_ctl_array 'const' in mnl_cb_run2() Kylie McClain (1): examples: nfct-daemon: Fix test building on musl libc Laura Garcia Liebana (4): examples: add arp cache dump example examples: fix neigh max attributes examples: fix print line format examples: reduce LOCs during neigh attributes validation Pablo Neira Ayuso (3): doxygen: remove EXPORT_SYMBOL from the output include: add MNL_SOCKET_DUMP_SIZE definition build: libmnl 1.0.5 release Petr Vorel (1): examples: Add rtnl-addr-add.c Stephen Hemminger (1): examples: rtnl-addr-dump: fix typo igo95862 (1): doxygen: Fixed link to the git source tree on the website. Signed-off-by: Nick Hainke <vincent@systemli.org>
* libnfnetlink: update to 1.0.2Nick Hainke2022-04-092-23/+3
| | | | | | | | | | | | | | | | | | | | | | | Changes: c63f193 bump version to 1.0.2 3cffa84 libnfnetlink: Check getsockname() return code 90ba679 include: Silence gcc warning in linux_list.h bb4f6c8 Make it clear that this library is deprecated e46569c Minimally resurrect doxygen documentation 5087de4 libnfnetlink: hide private symbols 62ca426 autogen: don't convert __u16 to u_int16_t efa1d8e src: Use stdint types everywhere 7a1a07c include: Sync with kernel headers 7633f0c libnfnetlink: initialize attribute padding to resolve valgrind warnings 94b68f3 configure: uclinux is also linux 617fe82 src: get source code license header in sync with current licensing terms 97a3960 build: resolve automake-1.12 warnings Removed the patch 100-missing_include.patch, libnfnetlink compiles fine with musl without this patch. Signed-off-by: Nick Hainke <vincent@systemli.org>
* gpio-button-hotplug: fix data raceAndrey Erokhin2022-04-091-1/+1
| | | | | | | bh_event_add_var can be called by multiple threads concurrently, so it shall not use a static char buffer Signed-off-by: Andrey Erokhin <a.erokhin@inango-systems.com>
* qosify: update to the latest versionFelix Fietkau2022-04-081-3/+3
| | | | | | | 92f5e18675bf interface: fix ifname present check in interface status ef82defaae26 ubus: add active devices to bridger blacklist Signed-off-by: Felix Fietkau <nbd@nbd.name>
* firewall4: update to latest Git HEADJo-Philipp Wich2022-04-081-4/+4
| | | | | | | | | a378883 fw4: fix emitting family specific redirect rules without any addrs 11feddf fw4: bracketize IPv6 addresses in dnat addr:port notation 9972f7d fw4: ensure to capitalize weekday names fde8070 treewide: forward compatibility changes Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ucode: update to latest Git HEADJo-Philipp Wich2022-04-081-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 33f1e0b treewide: move json-c compat shims into internal header file e0e9431 vm: move unhandled exception reporting out of `uc_vm_execute_chunk()` 2b59140 vm: fix callframe double free on unhanded exceptions 7d7e950 main: abort when failing to load a preload library 1032a67 lib: let `json()` accept input objects implementing `read()` method 5ee68d5 fs: implement `fs.readfile()` and `fs.writefile()` df6b861 ci: debian: change path before attempting to invoke Git operations dfaf05a ci: debian: automatically update changelog from Git tag 34f3c45 ci: fix YAML syntax of Debian workflow e956bcf fs: fix off-by-one in fs.dirname() function 6fc4b6c .gitignore: fix overmatching patterns, blacklist cram .venv 7c2e082 build: remove legacy json-c check 77942af build: add polyfills for older libjson-c versions 0b4aaa3 CI: build Debian package f404285 debian: Add package definition a37f654 types: fix escape sequence encoding of high byte values in JSON strings aae5312 Update README.md 8134e25 build: fix symlink install target 87c7296 treewide: replace some leftover "utpl" occurrences, update .gitignore 7d27ad5 build: only stage ucc symlink if compile support is enabled 171402f lib: add date and time related functions 8b5dc60 lib: provide API function to obtain stdlib function implementations eb0d2f1 main: turn ucode into multicall executable 28ee7e1 uloop: add support for tasks 753dea9 CI: build on macOS 668c5c0 lib: add argument position support (`%m$`) to `sprintf()` and `printf()` ab46fdf treewide: remove legacy json-c include directives b8f49b1 tests: 21_regex_literals: generalize syntax error test case fd2e5e7 tests: 16_sort: fix logic flaw exposed on OS X 2c71bf2 tests: run_tests.sh: pass dummy value to `-T` flag 55c4a90 lib: disallow zero padding for %s formats 0d05cb5 tests: run_tests.sh: use greadlink if available 271e520 resolv: make OS X compatible d13c320 fs: avoid Linux specific sys/sysmacros.h include on OS X 33397a3 uloop: use execvp() on OS X bafdc8f lib: add naive sigtimedwait() stub for OS X ada1585 build: consolidate CMakeLists.txt and cover OS X deviations befbb69 include: add OS X compatible endian.h header 49838a8 include: rename include guards to avoid clashes with system headers 91f65de nl80211: add missing attributes and correct some attribute flags b4a1fd5 lib: adjust require(), render() and include() raw mode semantics 4618807 main: rework CLI frontend 73dcd78 lib: fix potential integer underflow on empty render output c402551 vm: fix crash on object literals with non-string computed properties efe8a02 syntax: support add new operators 078d686 ubus: add event support 6c66c83 ubus: refactor error and argument handling 1cb04f9 ubus: add object publishing, notify and subscribe support 0e85974 uloop: clear errno before integer conversion attempts 05bd7ed types: treat resource type prototypes as GC roots a2a26ca lib: introduce uloop binding 6b6d01f vm: release this context on exception in managed method call 1af23a9 tests: fix proto() testcase 4ce69a8 fs: implement access(), mkstemp(), file.flush() and proc.flush() Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: add ubus link-measurements notificationsDavid Bauer2022-04-083-0/+43
| | | | | | Notify external ubus subscribers of received link-measurement reports. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add ubus method for requesting link measurementsDavid Bauer2022-04-081-0/+65
| | | | | | | | | | Add a ubus method to request link-measurements from connected STAs. In addition to the STAs address, the used and maximum transmit power can be provided by the external process for the link-measurement. If they are not provided, 0 is used as the default value. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add support for enabling link measurementsDavid Bauer2022-04-081-0/+10
| | | | | | | Allow external processes to enable advertisement of link-measurement RRM capability. Signed-off-by: David Bauer <mail@david-bauer.net>
* mt76: update to the latest versionFelix Fietkau2022-04-071-3/+3
| | | | | | | | | | | | | | | | | 5beb87716e70 mt76: dma: add wrapper macro for accessing queue registers e0bc736d5617 mt76: add support for overriding the device used for DMA mapping b8c842daa081 mt76: make number of tokens configurable dynamically 87a962e0608f mt76: mt7915: add Wireless Ethernet Dispatch support 2accb74e6be3 mt76: mt7915: fix using null pointer when wfsys on e5227f2f3120 mt76: mt7921: Fix the error handling path of mt7921_pci_probe() ec0e9f4da32f mt76: mt7915: fix possible uninitialized pointer dereference in mt7986_wmac_gpio_setup 5a87be892ba7 mt76: mt7915: fix possible NULL pointer dereference in mt7915_mac_fill_rx_vector fe441e5d3dcf mt76: mt7915: do not pass data pointer to mt7915_mcu_muru_debug_set f3ddfe886283 mt76: mt7915: report rx mode value in mt7915_mac_fill_rx_rate 2a0d370cb5fe mt76: mt7915: use 0xff to initialize bitrate_mask in mt7915_init_bitrate_mask 506bb0605e3e mt76: mt7921: Add AP mode support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ubox: add example /etc/modules.conf + conffiles entryFelix Fietkau2022-04-072-1/+9
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-imx: build 'u-boot-dtb.img' for SolidRun CuBox-iPiotr Dymacz2022-04-071-2/+2
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-imx: bump to 2022.01 releasePiotr Dymacz2022-04-074-56/+7
| | | | | | | | | | | | | | | Two patches were removed because of the changes introduced in upstream: 1. 110-mx6cuboxi-mmc-fallback.patch Looks like similar changes were introduced in 6c3fbf3e456c ("mx6cuboxi: customize board_boot_order to access eMMC"). 2. 111-mx6cuboxi_defconfig-force-mmc-boot.patch The 'CONFIG_SPL_FORCE_MMC_BOOT' was removed in 15aec318ef03 ("Revert "imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC boot on falcon mode"). Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* libselinux: add missing host-build dependency on libsepol/hostDaniel Golle2022-04-061-1/+1
| | | | | | | | The host-build of libselinux requires libsepol/host. Add the libsepol/host to HOST_BUILD_DEPENDS to allow build on hosts which don't have libsepol installed. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-24 15:01:05 +0000