aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* realtek: add support for ZyXEL GS1900-16Raylynn Knight2022-05-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-16 is a 16 port gigabit switch similar to other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-16 * SoC: Realtek RTL8382M 500 MHz MIPS 4KEc * Flash: 16 MiB Macronix MX25L12835F * RAM: 128 MiB DDR2 SDRAM Nanya NT5TU128M8HE * Ethernet: 16x 10/100/1000 Mbps * LEDs: 1 PWR LED (green, not configurable) 1 SYS LED (green, configurable) 16 ethernet port link/activity LEDs (green, SoC controlled) * Buttons: 1 "RESET" button on front panel * Power 120-240V AC C13 * UART: 1 serial header (J12) with populated standard pin connector on the right back of the PCB. Pinout (front to back): + Pin 1 - VCC marked with white dot + Pin 2 - RX + Pin 3 - TX + PIn 4 - GND Serial connection parameters: 115200 8N1. Installation ------------ OEM upgrade method: * Log in to OEM management web interface * Navigate to Maintenance > Firmware * Select the HTTP radio button * Select the Active radio button * Use the browse button to locate the realtek-generic-zyxel_gs1900-16-initramfs-kernel.bin file amd select open so File Path is update with filename. * Select the Apply button. Screen will display "Prepare for firmware upgrade ...". *Wait until screen shows "Do you really want to reboot?" then select the OK button * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade -n /tmp/realtek-generic-zyxel_gs1900-16-squashfs-sysupgrade.bin it may be necessary to restart the network (/etc/init.d/network restart) on the running initramfs image. U-Boot TFTP method: * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-16 is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot from the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-16-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade -n /tmp/openwrt-realtek-generic-zyxel_gs1900-16-squashfs-sysupgrade.bin it may be necessary to restart the network (/etc/init.d/network restart) on the running initramfs image. Signed-off-by: Raylynn Knight <rayknight@me.com> [removed duplicate patch title, align RAM specification] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* kernel: usb-xhci-pci-renesas: remove LINUX_5_10 dependency symbolChristian Lamparter2022-05-071-1/+0
| | | | | | | | With 5.4 out of the picture, remove LINUX_5_10 here. This is needed for the WNDR4700 as otherwise kmod-usb3 isn't available for 5.15. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel/x86: move x86' specific watchdogs to the x86 targetChristian Lamparter2022-05-071-65/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | upstream linux have these watchdogs locked behind X86. These will not build on other architectures. So move them to target/linux/x86/modules.mk drivers/watchdog/Kconfig: |config F71808E_WDT | tristate "Fintek F718xx, F818xx Super I/O Watchdog" | depends on X86 |[...] |config IT87_WDT | tristate "IT87 Watchdog Timer" | depends on X86 |[...] |config ITCO_WDT | tristate "Intel TCO Timer/Watchdog" | depends on (X86 || IA64) && PCI |[...] |config W83627HF_WDT | tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" | depends on X86 |[...] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: provide i6300esb for qemu/libvirtChristian Lamparter2022-05-071-0/+18
| | | | | | | | | | the Intel i6300esb is QEMU's default watchdog. And unlike the real "Intel i6300ESB I/O Controller hub" hardware, the i6300esb watchdog driver works on non-x86 targets like for ARM (armvirt 32bit) and potentially virtual PowerPC and MIPS targets (if there was any). Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq806x: add support for Arris TR4400 v2 / RAC2V1ARodrigo Balerdi2022-05-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specs: SoC: Qualcomm IPQ8065 (dual core Cortex-A15) RAM: 512 MB DDR3 Flash: 256 MB NAND, 32 MB NOR WiFi: QCA9983 2.4 GHz, QCA9984 5 GHz Switch: QCA8337 Ethernet: 5x 10/100/1000 Mbit/s USB: 1x USB 3.0 Type-A Buttons: WPS, Reset Power: 12 VDC, 2.5 A Ethernet ports: 1x WAN: connected to eth2 4x LAN: connected via the switch to eth0 and eth1 (eth0 is disabled in OEM firmware) MAC addresses (OEM and OpenWrt): fw_env @ 0x00 d4:ab:82:??:??:?a LAN (eth1) fw_env @ 0x06 d4:ab:82:??:??:?b WAN (eth2) fw_env @ 0x0c d4:ab:82:??:??:?c WLAN 2.4 GHz (ath1) fw_env @ 0x12 d4:ab:82:??:??:?d WLAN 5 GHz (ath0) fw_env @ 0x18 d4:ab:82:??:??:?e OEM usage unknown (eth0 in OpenWrt) OID d4:ab:82 is registered to: ARRIS Group, Inc., 6450 Sequence Drive, San Diego CA 92121, US More info: https://openwrt.org/inbox/toh/arris/tr4400_v2 IMPORTANT: This port requires moving the 'fw_env' partition prior to first boot to consolidate 70% of the usable space in flash into a contiguous partition. 'fw_env' contains factory-programmed MAC addresses, SSIDs, and passwords. Its contents must be copied to 'rootfs_1' prior to booting via initramfs. Note that the stock 'fw_env' partition will be wiped during sysupgrade. A writable 'stock_fw_env' partition pointing to the old, stock location is included in the port to help rolling back this change if desired. Installation: - Requires serial access and a TFTP server. - Fully boot stock, press ENTER, type in: mtd erase /dev/mtd21 dd if=/dev/mtd22 bs=128K count=1 | mtd write - /dev/mtd21 umount /config && ubidetach -m 23 && mtd erase /dev/mtd23 - Reboot and interrupt U-Boot by pressing a key, type in: set mtdids 'nand0=nand0' set mtdparts 'mtdparts=nand0:155M@0x6500000(mtd_ubi)' set bootcmd 'ubi part mtd_ubi && ubi read 0x44000000 kernel && bootm' env save - Setup TFTP server serving initramfs image as 'recovery.bin', type in: set ipaddr 192.168.1.1 set serverip 192.168.1.2 tftpboot recovery.bin && bootm - Use sysupgrade to install squashfs image. This port is based on work done by AmadeusGhost <amadeus@jmu.edu.cn>. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com> [add 5.15 changes for 0069-arm-boot-add-dts-files.patch] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* packages: nvram: add NVRAM quirks for bcm53xx targetArınç ÜNAL2022-05-043-4/+48
| | | | | | | | | | | Add NVRAM quirks script for the bcm53xx target. Split NVRAM quirks for the bcm47xx and bcm53xx targets. Move clear partialboot NVRAM quirk for Linksys EA9500 here. Add set wireless LED behaviour quirk for Asus RT-AC88U. Use boot() instead of start() as nvram commands are meant to be executed only once, at boot. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* firewall: config: remove restictions on DHCPv6 allow ruleTiago Gaspar2022-05-042-4/+2
| | | | | | | | | | | | | | Remove restrictions on source and destination addresses, which aren't specified on RFC8415, and for some reason in openwrt are configured to allow both link-local and ULA addresses. As cleared out in issue #5066 there are some ISPs that use Gloabal Unicast addresses, so fix this rule to allow them. Fixes: #5066 Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com> [rebase onto firewall3, clarify subject, bump PKG_RELEASE] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ltq-vdsl-app: disconnect when service is stoppedJan Hoffmann2022-05-043-3/+78
| | | | | | | | | | | | | | Stop the connection when the control daemon is terminated. The code is a modified version of the termination routine in version 4.23.1 of the daemon (which doesn't support VR9 modems anymore). This could also be implemented by calling the acos and acs commands via dsl_cpe_pipe.sh in the init script. However, doing it in the daemon itself has the advantage of also working if it is terminated in another way (for example during sysupgrade). Signed-off-by: Jan Hoffmann <jan@3e8.eu> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ltq-vdsl/ltq-adsl: fix elapsed time calculationJan Hoffmann2022-05-044-2/+246
| | | | | | | | | | | | | | | | | | | The driver maintains elapsed times by repeatedly accumulating the time since the previous update in a loop. For the elapsed showtime time, the time difference is truncated to seconds before adding it, leading to a sizable error over time. Move the truncation to before calculation of the time difference in order to remove this error. Also maintain the total elapsed time in the same way in full seconds, to prevent the unsigned 32-bit counter from wrapping around after about 50 days. Testing on a VR9 device shows that the reported line uptime now matches the actual elapsed wall time. The ADSL variant is only compile-tested, but it should also work as the relevant code is identical. Signed-off-by: Jan Hoffmann <jan@3e8.eu> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ltq-atm/ltq-ptm: avoid unnecessary build dependenciesJan Hoffmann2022-05-042-6/+11
| | | | | | | | | | | | | Right now, both ltq-adsl-mei and ltq-vdsl-mei are always built, even when they aren't necessary for the selected variant. This can cause the build to fail, for example ltq-vdsl-mei doesn't build successfully here on xway target due to the vectoring callback. Make these dependencies conditional on the specific package variants, so they are only built when actually needed. Signed-off-by: Jan Hoffmann <jan@3e8.eu> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* uqmi: update to git HEADDaniel Golle2022-05-041-3/+3
| | | | | | | 56cb2d4 nas: add decoding of cell_id 9a9019a uqmi: wms - added storage to read text messages Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* fstools: update to git HEADDaniel Golle2022-05-031-3/+3
| | | | | | 9e11b37 fstools: remove SELinux restorecon hack Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to git HEADDaniel Golle2022-05-031-3/+3
| | | | | | 652e6df init: restore SELinux labels after policy is loaded Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: simplify restorecon logicDaniel Golle2022-05-021-2/+2
| | | | | | | | | Remove forgotten redundant selinuxenabled call and skip the whole thing in case $IPKG_INSTROOT is set as labels are anyway applied only later on in fakeroot when squashfs is created. Fixes: 6d7272852e ("base-files: add missing $IPKG_INSTROOT to restorecon call") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* selinux-policy: update to version 1.1Dominick Grift2022-05-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | try to clean up some labeling inconsistencies iwinfo loose ends ucode loose ends Makefile: adjust mintesttgt (adds blockmount/blockd) nftables: reads inherited netifd pipe ucode: reads inherited netifd pipes mountroot: fowner sandbox: writes inherited dropbear pipes unbound related to /tmp/etc/ssl unbound loose ends adds a sslconftmpfile for /tmp/etc/ssl README: maintain a wish list in the README iwinfo: netifd forgot write gptfdisk loose ends iwinfo: netifd wpad reads/writes inherited netifd fifo files netifd (mac80211.sh) executes iwinfo luci: executes wireguard luci-cgi: audits xtables execute access rcuhttpd: lists ssl certfile dirs iwinfo, wifi,nftables usage of ttyd pty if available urandomseed: seedrng needs cap_sys_admin iwinfo iwinfo, nftables and some chronyd rules related to ntp nts server nftables, wifi and adds iwinfo skel nftables, rpcd, ucode nftables, ucode and seedrng ucode, fw3/nftables, luci adds ucode skel and some fw3/nftables related urandomseed: some seedrng rules fw3 adds some support for fw4 urandomseed: /etc/seedrng is for seed.credit hotplugcal: runs ucode which is interpreter like adds a nftables skeleton and makes xtables optional agent: allow all agents to write inherited dropbear pipes urandomseed: this seems to be replaced by seedrng kmodloader: label /etc/modules.conf kmodloader.conffile Revert "shelexecfile: remove auditallow rule" Makefile: sort the modules to process by secilc Moves back to git.defensec.nl unbound odhcpd (ip) reads net proc tcp dump shelexecfile: remove auditallow rule rrd.cil: fixes indent Target rddtool from cgi-io instead of runnit it without transition rrd.cil related rrd, rpcd, cgiio clean ups related to luci-app-statistics Rules for rrd files and luci-statistics unboundcontrol ordering Several missing permissions blockmount, dnsmasq, hotplugcall, rpcd, unbound adds mctp_socket (linux 5.15) ip: forgot tc-tiny type transition to go along with the fc spec ip: adds a fc spec for tc-tiny (called by sqm) adds ttyACM fc spec and various assorted loose ends .gitattributes: do not export the github workflows workflow use selinux 3.3 project moved back to https://git.defensec.nl/selinux-policy.git Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* ipq40xx: fix BDF file for pcie wifi chip on the GL.Inet GL-B2200Enrico Mioso2022-05-021-0/+0
| | | | | | | | | | | | | | | | | | | | | | After the switch to pre-calibration, ath10k would fail to initialize the PCIE Wi-Fi on the GL-B200 as follows: ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142) ath10k_pci 0000:01:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000 [...] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=GL-B2200 from ath10k/QCA9888/hw2.0/board-2.bin ath10k_pci 0000:01:00.0: failed to fetch board-2.bin or board.bin from ath10k/QCA9888/hw2.0 ath10k_pci 0000:01:00.0: failed to fetch board file: -12 ath10k_pci 0000:01:00.0: could not probe fw (-12) Repackage the BDF file after renaming relevant fields and files to allow for the Wi-Fi interface to start again. Fixes: 80d34d9d593 ("ipq40xx: document pcie wifi chip on the GL.Inet GL-B2200") CC: Christian Lamparter <chunkeey@gmail.com> CC: Robert Marko <robimarko@gmail.com> Reviewed-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
* base-files: add missing $IPKG_INSTROOT to restorecon callDaniel Golle2022-05-021-1/+3
| | | | | | | Update to overlooked v2 version of Dominick Grift's patch. Fixes: 5109bd164c ("base-files: address sed in-place without SELinux awareness") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: fix jail_mount for serversfileBruno Victal2022-05-021-1/+8
| | | | | | Fix 'serversfile' option not being jail_mounted by the init script. Signed-off-by: Bruno Victal <brunovictal@outlook.com>
* base-files: address sed in-place without SELinux awarenessDominick Grift2022-05-021-0/+1
| | | | | | | | | | | | sed(1) in busybox does not support this functionality: https://git.savannah.gnu.org/cgit/sed.git/tree/sed/execute.c#n598 This causes /etc/group to become mislabeled when a package requests that a uid/gid be added on OpenWrt with SELinux Signed-off-by: Daniel Golle <daniel@makrotopia.org> [move restorecon inside lock] Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* base-files: fix sysupgrade for kernel-out-of-UBIRodrigo Balerdi2022-05-021-2/+6
| | | | | | | | | | | | | | | | | | | | Commit ecbcc0b59551 bricks devices on which the raw kernel and UBI mtd partitions overlap. This is the case of the ZyXEL NR7101 for example. Its OEM bootloader has no UBI support. OpenWrt splits the stock kernel mtd partition into a raw kernel part used by the bootloader and a UBI part used to store rootfs and rootfs_data. Running mtd erase on the complete partition during sysupgrade erases the UBI part and results in a soft brick. Arguably the best solution would be to fix the partition layouts so that kernel and UBI partitions do not overlap, also including a stock_kernel partition to help reverting to stock firmware. This would have the added benefit of protecting UBI from kernel images that are excessively large. Fixes: ecbcc0b59551 ("base-files: safer sysupgrade.tar for kernel-out-of-UBI") Reported-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* fstools: update to git HEADDaniel Golle2022-05-011-3/+3
| | | | | | | | | | | | | f0fc66a libfstools: check for overlay mounting errors 128ecaf Update / fix extroot comments 8a0ba3b libfstools: get rid of "extroot_prefix" global variable 649cd3f libfstools: use variable for overlay mount-point 922f1b3 libfstools: avoid segfault in find_mount_point ce5eacb libfstools: mtd: improve error handling 898b328 blockd: restore device_move semantics 0917d22 block: don't probe mtdblock on NAND (with legacy exceptions) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mdadm: update to 4.2Nick Hainke2022-05-015-83/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refreshed patches: - 100-cross_compile.patch Manually refreshed patches: - 200-reduce_size.patch Removed patches: - 101-mdadm.h-Undefine-dprintf-before-redefining.patch - 102-Add-missing-include-file-sys-sysmacros.h.patch Changes: e30ca260 Release mdadm-4.2 8c80d305 Monitor: print message before quit for no array to monitor ced5fa8b mdadm: block creation with long names b71de056 Correct checking if file descriptors are valid b2e4f084 Incremental: Close unclosed mdfd in IncrementalScan() 195d1d76 imsm: assert if there is migration but prev_map doesn't exist 75f3ba25 imsm: free allocated memory in imsm_fix_size_mismatch bce0eab3 Release mdadm-4.2-rc3 4389ce73 imsm: introduce helpers to manage file descriptors 8e1a258e mdadm/Detail: Can't show container name correctly when unpluging disks a35aa68f mdadm/lib: Define a new helper function is_dev_alived 1c66260d Fix 2 dc stream buffer d64a37b9 Assemble: apply sysfs rules 5f6dedfb Fix potential overlap dest buffer a0422106 disallow create or grow clustered bitmap with writemostly set cf16a350 Fix buffer size warning for strcpy 60815698 Refactor parse_num and use it to parse optarg. f7889e51 Fix error message when creating raid 4, 5 and 10 54604768 mdadm: fix coredump of mdadm --monitor -r feeb2785 Utils: Change sprintf to snprintf b8bbf264 Release mdadm-4.2-rc2 e6878148 Assemble: skip devices that don't match uuid instead of aborting the assembly. 0663137c Add monitor delay parameter to mdadm.conf 2b2c5668 tests: Avoid passing chunk size when creating RAID 1 7d374a18 Fix memory leak after "mdadm --detail" 92a647c8 Assemble: start dirty and degraded array. 1c275381 imsm: fix num_data_stripes after raid0 takeover 5b30a34a Add error handling for chunk size in RAID1 3a85bf0e imsm: Fix possible memory leaks and refactor freeing struct dl ccd61ebf mdadm: Fix building errors 601ffa78 Don't associate spares with other arrays during RAID Examine 8d69bf14 Remove Spare drives line from details for external metadata 7d8935cb imsm: correct offset for 4k disks in --examine output dca80fcd Use dev_open in validate geometry container f421731c mdadm/super1: It needs to specify int32 for bitmap_offset 1f5d54a0 Manage: Call validate_geometry when adding drive to external container 8662f92d imsm: Limit support to the lowest namespace fcebeb77 imsm: add devpath_to_char method 7c798f87 imsm: add generic method to resolve "device" links 0530e2e0 Prevent user from using --stop with ambiguous args 83b3de77 Fix some building errors ff904202 imsm: change wrong size verification c11b1c3c Release mdadm-4.2-rc1 aec01630 super-intel.c: Handle errors from calls to get_dev_sector_size() 78c93b00 mdadm: fix growing containers af3396da Monitor: make libudev dependency optional f94df5cf imsm: support for third Sata controller d835518b imsm: nvme multipath support 4036e7ee imsm: extend curr_migr_unit to u64 bdbe7f81 Grow: Block reshape when external metadata and write-intent bitmap 848d71c9 Create: Block automatic enabling bitmap for external metadata 19ad203e imsm: Update-subarray for write-intent bitmap dc95f821 Add "bitmap" to allowed command-line values 69d40de4 imsm: Adding a spare to an existing array with bitmap fbc42556 imsm: Write-intent bitmap support b554ab5c Enable bitmap support for external metadata b090e910 Modify mdstat parsing for volumes with the bitmap db537788 It should be FAILED when raid has not enough active disks c7b8547c imsm: add verbose flag to compare_super 49b69533 mdmonitor: check if udev has finished events processing 0d583954 Document PPL in man md 2f86fda3 imsm: use saved fds during migration f7a6246b super1.c: avoid useless sync when bitmap switches from clustered to none e6561c4d super1: fix Floating point exception 8818d4e7 Grow: be careful of corrupt dev_roles list 4ae96c80 mdadm: fix reshape from RAID5 to RAID6 with backup file 1fe2e100 mdadm/bitmap: locate bitmap calcuate bitmap position wrongly 75562b57 Dump: get stat from a wrong metadata file when restoring metadata 69068584 Incremental: Remove redundant spare movement logic a64f1263 udev: start grow service automatically b4a5ad49 Make target to install binaries only 9c030dad mdadm/Detail: show correct state for clustered array ff6bb131 mdadm: Unify forks behaviour a8f3cfd5 imsm: limit support to first NVMe namespace ca4b156b Monitor: don't use default modes when creating a file b65c1f4a imsm: remove redundant calls to imsm_get_map 895ffd99 imsm: update num_data_stripes according to dev_size ce559078 Create.c: close mdfd and generate uevent c3129b39 Detail: fix segfault during IMSM raid creation 97b51a2c Super1: allow RAID0 layout setting to be removed. 7f3b2d1d Check if other Monitor instance running before fork. cab9c67d mdmonitor: set small delay once 007087d0 Monitor: stop notifing about containers. e2308733 Monitor: refresh mdstat fd after select 2ce09172 Don't create bitmap for raid5 with journal disk 64bf4dff Detail: show correct raid level when the array is inactive 5f418455 manual: update --examine-badblocks 5e592e1e mdadm/md.4: update path to in-kernel-tree documentation 138a9e9b Specify nodes number when updating cluster nodes 77b72fa8 mdadm/Grow: prevent md's fd from being occupied during delayed time bcf40dbb Update link to Intel page for IMSM 8e41153c Use more secure HTTPS URLs 2cf04330 Detect too-small device: error rather than underflow/crash 7758ada9 Block overwriting existing links while manual assembly d92cee7b restripe: fix ignoring return value of ‘read’ and lseek 7d90f760 Include count for \0 character when using strncpy to implement strdup. f4c8a605 uuid.c: split uuid stuffs from util.c 03ab9763 Makefile: add EXTRAVERSION support 3b7aae92 mdcheck: Log when done 7b99edab Assemble.c: respect force flag. ec7d7cee clean up meaning of small typo 5cfb79de Assemble: print error message if mdadm fails assembling with --uuid option 12724c01 Manage, imsm: Write metadata before add 1c294b5d Detail: adding sync status for cluster device 185ec439 Monitor: improve check_one_sharer() for checking duplicated process e1b92ee0 udev: Ignore change event for imsm ba1b3bc8 imsm: show Subarray and Volume ID in --examine output e48aed3c imsm: support the Array Creation Time field in metadata 9e449405 Detail: show correct bitmap info for cluster raid device 06a6101c imsm: Correct minimal device size. 45c43276 imsm: Remove --dump/--restore implementation 3364781b imsm: pass subarray id to kill_subarray function fd38b8ea Remove the legacy whitespace 2551061c mdadm.8: add note information for raid0 growing operation 1e93d0d1 imsm: fill working_disks according to metadata. 42e641ab Add support for Tebibytes 4431efeb imsm: Update grow manual. e1512e7b mdcheck service can't start succesfully because of syntax error 1a874930 Change warning message aced6fc9 Respect $(CROSS_COMPILE) when $(CC) is the default 027c099f Assemble: add support for RAID0 layouts. 329dfc28 Create: add support for RAID0 layouts. 6da53c0e imsm: Change the way of printing nvme drives in detail-platform. b771faef imsm: return correct uuid for volume in detail 4b31846f Remove unused code 9cf361f8 Fix up a few formatting issues 02af3793 Remove last traces of HOT_ADD_DISK 1cc3965d Manage: Remove the legacy code for md driver prior to 0.90.03 761e3bd9 super-intel: don't mark structs 'packed' unnecessarily 85b83a79 SUSE-mdadm_env.sh: handle MDADM_CHECK_DURATION 4ca799c5 mdcheck: use ${} to pass variable to mdcheck 6636788a mdcheck: when mdcheck_start is enabled, enable mdcheck_continue too. 1a1ced1e imsm: allow to specify second volume size b6180160 imsm: save current_vol number 7bd59e79 udev: allow for udev attribute reading bug. 61109314 Don't need to check recovery after re-add when no I/O writes to raid 8063fd0f Init devlist as an array e53cb968 mdadm/md.4: add the descriptions for bitmap sysfs nodes 2c2d9c48 mdadm: force a uuid swap on big endian 43ebc910 mdadm: Introduce new array state 'broken' for raid0/linear fd5b09c9 mdadm: check value returned by snprintf against errors 91c97c54 imsm: close removed drive fd. 1a52f1fc udev: add --no-devices option for calling 'mdadm --detail' d11abe4b mdadm: add --no-devices to avoid component devices detail information 452dc4d1 mdadm.h: include sysmacros.h unconditionally b0681598 mdadm: load default sysfs attributes after assemblation 486720e0 super-intel: Use put_unaligned in split_ull 7039d1f8 mdadm.h: Introduced unaligned {get,put}_unaligned{16,32}() a4f7290c super-intel: Fix issue with abs() being irrelevant 4ec389e3 Enable probe_roms to scan more than 6 roms. ae7d61e3 mdmon: fix wrong array state when disk fails during mdmon startup 3c9b46cf udev: Add udev rules to create by-partuuid for md device 22dc741f Create: Block rounding size to max 05501181 imsm: fix spare activation for old matrix arrays 227aeaa8 add missing units to --examine 2b57e4fe Assemble: Fix starting array with initial reshape checkpoint d2e11da4 mdmon: wait for previous mdmon to exit during takeover 69d08478 mdmon: don't attempt to manage new arrays when terminating 76b906d2 mdadm/tests: add one test case for failfast of raid1 cab114c5 Fix reshape for decreasing data offset e3615ecb Detail.c: do not skip first character when calling xstrdup in Detail() ebf3be99 Fix spelling typos. 9f421827 imsm: fix reshape for >2TB drives a4e96fd8 imsm: finish recovery when drive with rebuild fails 757e5543 policy.c: Fix for compiler error 467e6a1b policy.c: prevent NULL pointer referencing 76d505de Grow: report correct new chunk size. 085df422 Grow: avoid overflow in compute_backup_blocks() 563ac108 Assemble: mask FAILFAST and WRITEMOSTLY flags when finding the most recent device d7a1fda2 imsm: update metadata correctly while raid10 double degradation 7cd7e91a Monitor: add system timer to run --oneshot periodically 4199d3c6 mdcheck: add systemd unit files to run mdcheck. cd72f9d1 policy: support devices with multiple paths. 6b611284 Document PART-POLICY lines 0833f9c3 Assemble: keep MD_DISK_FAILFAST and MD_DISK_WRITEMOSTLY flag Signed-off-by: Nick Hainke <vincent@systemli.org>
* f2fs-tools: fix resize.f2fs (#9800)Kerma Gérald2022-05-012-1/+47
| | | | | | | | | resolve issue - https://github.com/openwrt/openwrt/issues/9800 add the upstream patch: - f2fs-tools.git/patch/?id=f056fbeff08d30a6d9acdb9e06704461ceee3500 Signed-off-by: Kerma Gérald <gandalf@gk2.net>
* uboot-mvebu: update to version v2022.04Josef Schlehofer2022-05-018-524/+2
| | | | | | | | | | | | | | Release announcement: https://lore.kernel.org/u-boot/20220404143253.GQ14476@bill-the-cat/ Release notes between tags: https://source.denx.de/u-boot/u-boot/-/compare/v2022.01...v2022.04?from_project_id=531 All patches were removed, since they are included in this release. Run tested: Turris Omnia, mvebu/cortex-a9, OpenWrt daily snapshots Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* uboot-mvebu: remove enabled CONFIG_CMD_SETEXPRJosef Schlehofer2022-05-011-7/+0
| | | | | | | | | | | | | | | | | | | | | | We don't need to make sure that we want to have enabled CONFIG_CMD_SETEXPR by default, since this is already done in U-boot [1]. This was actually needed only for clearfog board [2], which was added in commit: da0005a6d08ae33d958a6d8a6c0c12dc07b5b2b8 ("uboot-mvebu: add patch to enable setexpr for clearfog boards) and send to U-boot to fix it properly. After a while, there was added support for Turris Omnia, which uses setexpr as well [3], but for this board, there are no fixes needed in U-boot and that's why we can remove this option here. It is helpful with shell scripting. If some downstream distributions are using it, they should correct it in defconfig for related boards. [1] https://source.denx.de/u-boot/u-boot/-/blob/e95afa56753cebcd20a5114b6d121f281b789006/cmd/Kconfig#L1504 [2] https://github.com/openwrt/openwrt/blob/852126680e21edc71c0c66561ae5a6d7479dcc67/target/linux/mvebu/image/clearfog.bootscript#L7 [3] https://github.com/openwrt/openwrt/blob/852126680e21edc71c0c66561ae5a6d7479dcc67/target/linux/mvebu/image/turris-omnia.bootscript#L2 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* uboot-mvebu: add patch to enable setexpr for clearfog boardsJosef Schlehofer2022-05-011-0/+31
| | | | | | | | | | | | | | Option CMD_SETEXPR is already default in U-boot [1], since this was disabled since initial version for this board, there is send this patch to U-boot mailing list to enable it. It is required to use in OpenWrt bootscript for these boards [2]. [1] https://source.denx.de/u-boot/u-boot/-/blob/e95afa56753cebcd20a5114b6d121f281b789006/cmd/Kconfig#L1504 [2] https://github.com/openwrt/openwrt/blob/852126680e21edc71c0c66561ae5a6d7479dcc67/target/linux/mvebu/image/clearfog.bootscript#L7 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* ucode: reorder BuildPackage callsJo-Philipp Wich2022-04-281-1/+1
| | | | | | | | | Ensure that the libucode recipe is processed before the ucode one in order to reliably encode the ABI version into ucode's libucode dependency. Fixes: #9788 Ref: https://forum.openwrt.org/t/fw4-wont-start-after-upgrade/126308 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* iwinfo: update to latest HEADDavid Bauer2022-04-271-3/+3
| | | | | | dc6847e iwinfo: nl80211: omit A-hwmode on non-5GHz hardware Signed-off-by: David Bauer <mail@david-bauer.net>
* nat46: update to git HEADHans Dedecker2022-04-261-3/+3
| | | | | | | | | 95ca1c3 nat46-core: ignore IPv4 options when translating packets 39778c2 add a module argument to ignore TOS translate for IPv4 9a36ee1 add a module argument to ignore TOS translate for IPv4 79190a8 add a module argument to ignore TOS translate for IPv4 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uboot-envtools: add WS-AP3825i configDavid Bauer2022-04-261-0/+4
| | | | | | | Add configuration to use uboot-envtools with the Extreme Networks WS-AP3825i. Signed-off-by: David Bauer <mail@david-bauer.net>
* dnsmasq: add logfacility file to jail mountsDaniel Golle2022-04-251-2/+6
| | | | | | | | If logfacility is a path to a file it needs to be r/w mounted in the sandbox as well for dnsmasq to work. Reported-by: @iointerrupt Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* iwinfo: update to latest HEADDavid Bauer2022-04-241-3/+3
| | | | | | | a479b9b devices: remove whitespace 562d015 iwinfo: nl80211: fix hwmode parsing for multi-band NICs Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add support for YunCore AX820/HWAP-AX820Clemens Hopfer2022-04-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two versions which are identical apart from the enclosure: YunCore AX820: indoor ceiling mount AP with integrated antennas YunCore HWAP-AX820: outdoor enclosure with external (N) connectors Hardware specs: SoC: MediaTek MT7621DAT Flash: 16 MiB SPI NOR RAM: 128MiB (DDR3, integrated) WiFi: MT7905DAN+MT7975DN 2.4/5GHz 2T2R 802.11ax Ethernet: 10/100/1000 Mbps x2 (WAN/PoE+LAN) LED: Status (green) Button: Reset Power: 802.11af/at PoE; DC 12V,1A Antennas: AX820(indoor): 4dBi internal; HWAP-AX820(outdoor): external Flash instructions: The "OpenWRT support" version of the AX820 comes with a LEDE-based firmware with proprietary MTK drivers and a luci webinterface and ssh accessible under 192.168.1.1 on LAN; user root, no password. The sysupgrade.bin can be flashed using luci or sysupgrade via ssh, you will have to force the upgrade due to a different factory name. Remember: Do *not* preserve factory configuration! MAC addresses as used by OEM firmware: use address source 2g 44:D1:FA:*:0b Factory 0x0004 (label) 5g 46:D1:FA:*:0b LAA of 2g lan 44:D1:FA:*:0c Factory 0xe000 wan 44:D1:FA:*:0d Factory 0xe000 + 1 The wan MAC can also be found in 0xe006 but is not used by OEM dtb. Due to different MAC handling in mt76 the LAA derived from lan is used for 2g to prevent duplicate MACs when creating multiple interfaces. Signed-off-by: Clemens Hopfer <openwrt@wireloss.net>
* mt76: update to the latest versionFelix Fietkau2022-04-231-3/+3
| | | | | | a666d5637bc3 mt76: fix tx status related use-after-free race on station removal Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ucode: fix PKG_MIRROR_HASHJo-Philipp Wich2022-04-221-1/+1
| | | | | Fixes: 0400774a10 ("ucode: update to latest Git HEAD") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* firewall4: update to latest Git HEADJo-Philipp Wich2022-04-221-3/+3
| | | | | | | | fc83d46 ruleset: set auto-merge directive for interval sets 9bce873 fw4: fix skipping invalid ipset entries 425ea8a fw4: fix applying zone flags for source bound rules Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ucode: update to latest Git HEADJo-Philipp Wich2022-04-221-3/+3
| | | | | | | e14b099 syntax: implement support for ES6 template literals 111cf06 vm: stop executing bytecode on return of nested calls Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mt76: update to the latest versionFelix Fietkau2022-04-201-3/+3
| | | | | | | | | | | | | | | | d4937118ec4f mt76: fix rx reordering with non explicit / psmp ack policy f50672518bcc mt76: do not attempt to reorder received 802.3 packets without agg session 75e046e3c9ae mt76: fix antenna config missing in 6G cap 64ede85f14b5 mt76: mt7915: remove SCS feature db0a67582028 mt76: mt7915: make read-only array ppet16_ppet8_ru3_ru0 static const 68a2f68d5c01 mt76: mt7921: make read-only array ppet16_ppet8_ru3_ru0 static const 1e7b77294e97 mt76: mt7921: fix kernel crash at mt7921_pci_remove 795830a99a6c mt76: mt7915: add debugfs knob for RF registers read/write 60a8ec12a8eb mt76: mt7603: move spin_lock_bh() to spin_lock() 5ec7a2eac867 mt76: mt7915: disable RX_HDR_TRANS_SHORT eecbb4992073 mt76: fix encap offload ethernet type check Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-mediatek: replace patch with accepted commitDaniel Golle2022-04-201-34/+10
| | | | | | | | Replace pending patch with version accepted upstream. Other than in the first suggested version, the new property is now called 'u-boot,bootconf' instead of 'bootconf'. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* wolfssl: fix compilation with /dev/cryptoEneas U de Queiroz2022-04-201-0/+19
| | | | | | This is trivial fix of a duplicate definition of 'int ret'. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* uboot-mediatek: remove '0x' prefix from pstore nodeDaniel Golle2022-04-191-1/+1
| | | | | | | | Remove '0x' prefix from pstore node in dts, just like it was done for the device tree used by Linux on MT7622. This change is done in preparation to update U-Boot to 2022.04. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: minimize critical time in sysupgradeRodrigo Balerdi2022-04-191-5/+6
| | | | | | | | Attempt to minimize the time during which an interrupted nand sysupgrade can lead to a non-functional device by flushing caches before starting the upgrade procedure. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: trim unnecessary nand sysupgrade codeRodrigo Balerdi2022-04-191-4/+1
| | | | | | Remove unnecessary sync commands during nand sysupgrade. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: fix issues in nand sysupgradeRodrigo Balerdi2022-04-191-10/+21
| | | | | | | | | Fix issues while retaining configuration during nand sysupgrade: - abort configuration saving if data partition is not found - generate diagnostics if saving fails (eg, because of lack of space) - do not output "sysupgrade successful" in case of errors Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: clean up nand sysupgrade codeRodrigo Balerdi2022-04-191-9/+9
| | | | | | Fix some inconsistent quoting in nand sysupgrade code. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: clean up ubinized sysupgrade codeRodrigo Balerdi2022-04-191-7/+3
| | | | | | | | Remove redundant check from nand ubinized sysupgrade code. This check has already been done in the only caller of the affected function: nand_do_upgrade. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: clean up nand tar sysupgrade codeRodrigo Balerdi2022-04-191-34/+34
| | | | | | | | | | | | | | | | | Prepares code for ubirename-based safe sysupgrade implementation. Fixes several issues: - the special CI_KERNPART value "none" is ignored if an MTD partition named "none" exists - misleading variable names (such as has_kernel to mean "tar has kernel and it should not be written to an MTD partition but a UBI volume") - inconsistent treatment of zero-length tar member files - inconsistent meaning of "0" and "" variable values - redundant operations (unneeded untaring, repeated untaring, unneeded partition lookups) - inconsistent variable quoting Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: safer sysupgrade.tar for kernel-out-of-UBIRodrigo Balerdi2022-04-191-1/+5
| | | | | | | | | Ensure that the kernel CRC is invalidated while rootfs is being updated. This allows the bootloader to detect an interrupted sysupgrade and fall back to an alternate booting method, such as TFTP, instead of just going ahead with normal boot and effectively bricking the device. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: safer sysupgrade for kernel-in-UBI devicesRodrigo Balerdi2022-04-191-7/+7
| | | | | | | | | | | | | | Ensure that the kernel CRC is invalidated while rootfs is being updated. This allows the bootloader to detect an interrupted sysupgrade and fall back to an alternate booting method, instead of just going ahead with normal boot and effectively bricking the device. Possible fallbacks include a recovery initramfs partition or UBI volume and TFTP. See here for an example U-Boot configuration with fallbacks: https://shorturl.at/befsA (https://github.com/Lanchon/openwrt-tr4400-v2/ blob/e7d707d6bd7839fbd0b8d0bd180fce451df77e47/install-recovery.sh#L52-L63) Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: fix nand sysupgrade commentsRodrigo Balerdi2022-04-191-3/+3
| | | | | | Erroneous comments possibly applied to an earlier code revision. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 21:13:48 +0000