aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* busybox: turn on BUSYBOX_DEFAULT_ASH_RANDOM_SUPPORT for having $RANDOMIlario Gelmetti2023-04-251-1/+1
| | | | | | $RANDOM shell variable is a convenient way for getting a random number from 0 to 32767 Signed-off-by: Ilario Gelmetti <iochesonome@gmail.com>
* busybox: Activate resize tool by defaultHauke Mehrtens2023-04-251-1/+1
| | | | | | | | | | | The resize tool will resize the prompt to match the current terminal size. This is helpful when connecting to the system using UART to make the vi or top output match the current terminal size. This increases the busybox binary size by 136 bytes and the ipkg size by 335 bytes on aarch64. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: add support for Alcatel HH40VAndreas Böhler2023-04-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Alcatel HH40V is a CAT4 LTE router used by various ISPs. Specifications ============== SoC: QCA9531 650MHz RAM: 128MiB Flash: 32MiB SPI NOR LAN: 1x 10/100MBit WAN: 1x 10/100MBit LTE: MDM9607 USB 2.0 (rndis configuration) WiFi: 802.11n (SoC integrated) MAC address assignment ====================== There are three MAC addresses stored in the flash ROM, the assignment follows stock. The MAC on the label is the WiFi MAC address. Installation (TFTP) =================== 1. Connect serial console 2. Configure static IP to 192.168.1.112 3. Put OpenWrt factory.bin file as firmware-system.bin 4. Press Power + WPS and plug in power 5. Keep buttons pressed until TFTP requests are visible 6. Wait for the system to finish flashing and wait for reboot 7. Bootup will fail as the kernel offset is wrong 8. Run "setenv bootcmd bootm 0x9f150000" 9. Reset board and enjoy OpenWrt Installation (without UART) =========================== Installation without UART is a bit tricky and requires several steps too long for the commit message. Basic steps: 1. Create configure backup 2. Patch backup file to enable SSH 3. Login via SSH and configure the new bootcmd 3. Flash OpenWrt factory.bin image manually (sysupgrade doesn't work) More detailed instructions will be provided on the Wiki page. Tested by: Christian Heuff <christian@heuff.at> Signed-off-by: Andreas Böhler <dev@aboehler.at>
* hostapd: update to 2023-03-29Nick Hainke2023-04-2254-587/+504
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add patches: - 170-wpa_supplicant-fix-compiling-without-IEEE8021X_EAPOL.patch Remove upstreamed: - 170-DPP-fix-memleak-of-intro.peer_key.patch - 461-driver_nl80211-use-new-parameters-during-ibss-join.patch - 800-acs-don-t-select-indoor-channel-on-outdoor-operation.patch - 992-openssl-include-rsa.patch Automatically refreshed: - 011-mesh-use-deterministic-channel-on-channel-switch.patch - 021-fix-sta-add-after-previous-connection.patch - 022-hostapd-fix-use-of-uninitialized-stack-variables.patch - 030-driver_nl80211-rewrite-neigh-code-to-not-depend-on-l.patch - 040-mesh-allow-processing-authentication-frames-in-block.patch - 050-build_fix.patch - 110-mbedtls-TLS-crypto-option-initial-port.patch - 120-mbedtls-fips186_2_prf.patch - 140-tests-Makefile-make-run-tests-with-CONFIG_TLS.patch - 150-add-NULL-checks-encountered-during-tests-hwsim.patch - 160-dpp_pkex-EC-point-mul-w-value-prime.patch - 200-multicall.patch - 300-noscan.patch - 310-rescan_immediately.patch - 330-nl80211_fix_set_freq.patch - 341-mesh-ctrl-iface-channel-switch.patch - 360-ctrl_iface_reload.patch - 381-hostapd_cli_UNKNOWN-COMMAND.patch - 390-wpa_ie_cap_workaround.patch - 410-limit_debug_messages.patch - 420-indicate-features.patch - 430-hostapd_cli_ifdef.patch - 450-scan_wait.patch - 460-wpa_supplicant-add-new-config-params-to-be-used-with.patch - 463-add-mcast_rate-to-11s.patch - 465-hostapd-config-support-random-BSS-color.patch - 500-lto-jobserver-support.patch - 590-rrm-wnm-statistics.patch - 710-vlan_no_bridge.patch - 720-iface_max_num_sta.patch - 730-ft_iface.patch - 750-qos_map_set_without_interworking.patch - 751-qos_map_ignore_when_unsupported.patch - 760-dynamic_own_ip.patch - 761-shared_das_port.patch - 990-ctrl-make-WNM_AP-functions-dependant-on-CONFIG_AP.patch Manually refresh: - 010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch - 301-mesh-noscan.patch - 340-reload_freq_change.patch - 350-nl80211_del_beacon_bss.patch - 370-ap_sta_support.patch - 380-disable_ctrl_iface_mib.patch - 464-fix-mesh-obss-check.patch - 470-survey_data_fallback.patch - 600-ubus_support.patch - 700-wifi-reload.patch - 711-wds_bridge_force.patch - 740-snoop_iface.patch Tested-by: Packet Please <pktpls@systemli.org> [Fritzbox 4040 (ipq40xx), EAP225-Outdoor (ath79); 802.11s, WPA3 OWE, and WPA3 PSK] Tested-by: Andrew Sim <andrewsimz@gmail.com> [mediatek/filogic] Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: b43: only enable bcma or ssb on bmipsÁlvaro Fernández Rojas2023-04-231-2/+2
| | | | | | | | | By default both kmod-bcma and kmod-ssb are selected by kmod-b43. However, only one of both modules is needed for bmips subtargets: - bcma: bcm6318, bcm6328, bcm6362, bcm63268 - ssb: bcm6358, bcm6368 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: add bcma/ssb fallback SPROM supportÁlvaro Fernández Rojas2023-04-231-0/+2
| | | | | | | This adds generic kernel support for Broadcom Fallback SPROMs so that it can be used in any target, even non Broadcom ones. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* broadcom-sprom: add new packageÁlvaro Fernández Rojas2023-04-231-0/+295
| | | | | | | This adds a new package with Broadcom SPROMs that can be used as fallback when the devices lack physical SPROMs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* uboot-mediatek: add TP-Link TL-XDR4288 and TL-XDR608xDaniel Golle2023-04-223-0/+971
| | | | | | | | | | | | | | | | TP-Link TL-XDR608x comes with locked vendor loader. Add U-Boot build for replacement loader for both TL-XDR6086 and TL-XDR6088. The only difference at U-Boot level is the different filename requested via TFTP, matching the corresponding OpenWrt build artifacts for each device. The TP-Link TL-XDR4288 has the same hardware as the TP-Link TL-XDR6088 except for the wireless part. Also create a uboot for the TP-Link TL-XDR4288. Signed-off-by: Daniel Golle <daniel@makrotopia.org> [rebase to uboot 23.04, correct led and button] Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* libpcap: update to 1.10.4Nick Hainke2023-04-221-2/+2
| | | | | | | Changes: https://git.tcpdump.org/libpcap/blob/104271ba4a14de6743e43bcf87536786d8fddea4:/CHANGES Signed-off-by: Nick Hainke <vincent@systemli.org>
* ksmbd: update to latest 3.4.8 releaseAndrew Sim2023-04-201-2/+2
| | | | | | Changelog: https://github.com/cifsd-team/ksmbd/releases/tag/3.4.8 Signed-off-by: Andrew Sim <andrewsimz@gmail.com>
* uboot-mediatek: fix factory/reset buttonDaniel Golle2023-04-2013-22/+110
| | | | | | | | | | | U-Boot commit ea6fdc13595 ("dm: button: add support for linux_code in button-gpio.c driver") makes it mandatory to specify linux,code for all buttons. As that broke handling of the reset button in U-Boot with the update to U-Boot 2023.04, add linux,code for all butons. Reported-by: @DragonBluep Fixes: 50f7c5af4a ("uboot-mediatek: update to v2023.04") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: fix up qrtr packaging after 5.15.107 bumpStefan Lippers-Hollmann2023-04-191-2/+1
| | | | | | | | qrtr/ns.ko is now merged into qrtr/qrtr.ko, so drop the individual module packaging. Fixes: f4989239cc91 ("kernel: bump 5.15 to 5.15.107") Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> #ipq807x/ax3600, x86_64/FW-7543B, mt7621/dap-x1860
* mwlwifi: update to version 10.3.9.0-20230311Kabuli Chana2023-04-196-133/+19
| | | | | | | | | | | | | upstream PR 408 improvements: -Fix AMSDU packets unused -Removed the ASMDU packets queue -Add more info in the iw tool -fix is_hw_crypto_enabled -Optimization AMPDU_TX_OPERATIONAL (avoid a spinlock) change to wongsyrone mod Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* mac80211: ath11k: replace 160MHz fix with upstream pending oneRobert Marko2023-04-183-31/+132
| | | | | | | | QCA has finally sent a proper fixup for the 160MHz regression upstream, so lets use the pending fix which also properly sets center frequency 2 in case 80+80 MHz is used. Signed-off-by: Robert Marko <robimarko@gmail.com>
* yafut: add a kernel update tool for MikroTik NANDMichał Kępień2023-04-181-0/+35
| | | | | | | | | | | | | | | | | | | | | | Commit 9d96b6fb72 ("ath79/mikrotik: disable building NAND images") disabled building images for MikroTik devices with NAND flash due to a less than satisfactory method used for updating the kernel on those devices back then. To address the problem, add support for updating the kernel on MikroTik devices with NAND flash using a new tool, Yafut, which enables copying files from/to Yaffs file systems even if the kernel does not have native support for the Yaffs file system compiled in. Instead of erasing the entire NAND partition holding the kernel during every system upgrade (which is what the previously-used approach employing kernel2minor involved), Yafut preserves the Yaffs filesystem present on that partition and only replaces the kernel executable. This allows bad block information to be preserved across sysupgrade runs and also enables wear leveling on the NAND partition holding the kernel. Yafut does not rely on kernel2minor in any way and intends to eventually supersede the latter for NAND devices. Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
* mac80211: update to v6.1.24Felix Fietkau2023-04-1844-1296/+233
| | | | | | Drop patches accepted upstream Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2023-04-171-3/+3
| | | | | | 7de5440a520f device: fix segfault when recreating devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tcpdump: update to 4.99.4Nick Hainke2023-04-171-2/+2
| | | | | | | | | Fixes CVE-2023-1801. Changelog can be found here: https://git.tcpdump.org/tcpdump/blob/55bc126b0216cfe409b8d6bd378f65679d136ddf:/CHANGES Signed-off-by: Nick Hainke <vincent@systemli.org>
* uboot-mediatek: fix build for RAVPower RP-WD009Daniel Golle2023-04-141-28/+8
| | | | | | | | | | | | Updating to U-Boot 2023.04 broke the build for the RAVPower RP-WD009 MT7628 board. This was due to upstream conversion of CONFIG_* to CFG_* which was not applied to our downstream patch adding support for the RAVPower RP-WD009 device. Apply CONFIG_* to CFG_* converion analog to what has been done also for mt7928_rfb upstream. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uclient: update to Git version 2023-04-13Matthias Schiffer2023-04-131-3/+3
| | | | | | | | 007d94546749 uclient: cancel state change timeout in uclient_disconnect() 644d3c7e13c6 ci: improve wolfSSL test coverage dc54d2b544a1 tests: add certificate check against letsencrypt.org Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* uboot-mediatek: update to v2023.04Daniel Golle2023-04-1241-298/+427
| | | | | | | | | | | | | | | | | | | | | | | | Update to next U-Boot timed release. Remove now obsolete patch 100-01-board-mediatek-add-more-network-configurations.patch Default IP addresses are now dealt with in Kconfig, no longer in board- specific C header files. Add patches to restore ANSI support in bootmenu which was broken upstream, always use high-speed mode on serial UART for improved stability and fix an issue with pinconf not being applied on MT7623 resulting in eMMC being inaccessible when booting from micro SD card. In order to keep the size of the bootloader on MT7623 below 512kB remove some unneeded commands on both MT7623 boards. Tested on: * BananaPi BPi-R2 (MT7623N) * BananaPi BPi-R3 (MT7986A) * BananaPi BPi-R64 (MT7622A) * Linksys E8450 (MT7622B) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: add 'isup' to the wifi scriptAndre Heider2023-04-121-1/+18
| | | | | | | | | | | | | | This is a silent command that allows easy wifi up/down automation for scripts. It takes one or multiple devices as arguments (or all if none are passed), and the exit code indicates if any of those is not up. E.g.: wifi isup && echo "all wifi devices are up" wifi isup radio0 || echo "this wifi is down" Signed-off-by: Andre Heider <a.heider@gmail.com>
* base-files: use named variables in the wifi scriptAndre Heider2023-04-121-2/+2
| | | | | | | Use the already present but unused $cmd and $dev variables instead of positional parameters in ubus_wifi_cmd() to improve readability. Signed-off-by: Andre Heider <a.heider@gmail.com>
* mac80211: ath11k: sync with ath-nextRobert Marko2023-04-1210-205/+728
| | | | | | | | | | | | Synchronize the ath11k backports with the current ath-next tree. This replaces the management TLV pending fix with the upstreamed one, fixes traffic flooding when AP and monitor modes are used at the same time, fixes QCN9074 always showing -95 dBm for station RSSI in dumps, fixes potential crash on boot if spectral scan is enabled due to writing to unitialized memory and adds 11d scan offloading for WCN6750 and WCN6855. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq-wifi: bump to latest git HEADChristian Marangi2023-04-121-3/+3
| | | | | | | | b22487d ath11k: qcn8074: Update regDb in every BDF 3add8be ath11k: ipq8074: Update regDb in every BDF 8bb6039 ath11k: ipq8074: add Netgear RAX120v2 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mac80211: ath11k: Remove regulatory intersectionRobert Marko2023-04-111-0/+317
| | | | | | | | | | | | | | | | | | | | | | | | | Currently, during initialization ath11k will receive a regulatory event from the firmware in which it will receive the default regulatory domain code and accompanying rules list and report those to the kernel. Then if you try to change the regulatory domain to a different country code it will do a weird thing in which it will send that to the FW and after receiving the appropriate regulatory event it will parse the rules. However, while its parsing there is a weird thing being done, and that is that new raw rules from FW get intersected with the rules from the default domain. This is creating a big issue as the default domain is almost always set to "US" or just "00" aka world so ath11k will unfairly limit you to the most restrictive combination of rules based on the default domain and your desired domain. For example, in ETSI countries this is causing channels 12 and 13 on 2.4GHz to not be usable since "US" limits 2.4GHz to 2472MHz instead of 2482MHz like ETSI countries do. So, lets do what TIP and even QCA do in their ath11k downstream tree and completely get rid of the interesection code in ath11k. Signed-off-by: Robert Marko <robimarko@gmail.com>
* uboot-envtools: update to 2023.04Nick Hainke2023-04-111-2/+2
| | | | | | Update to latest version. Signed-off-by: Nick Hainke <vincent@systemli.org>
* base-files: fix nand_upgrade_ubinized()Rafał Miłecki2023-04-111-1/+3
| | | | | | | | | | | | | | | | | | When using "ubiformat" with stdin it requires passing image size using the -S argument. Provide it just like we do for "ubiupdatevol". This fixes: ubiformat: error!: must use '-S' with non-zero value when reading from stdin This change fixes sysupgrade for bcm53xx and bcm4908 NAND devices possibly some other targets too. Cc: Rodrigo Balerdi <lanchon@gmail.com> Cc: Daniel Golle <daniel@makrotopia.org> Fixes: 971071212052 ("base-files: accept gzipped nand sysupgrade images") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
* uboot-sunxi: update support for FriendlyARM ZeroPIArturas Moskvinas2023-04-103-105/+148
| | | | | | | | | | Since commit torvalds/linux@bbc4d71 ("net: phy: realtek: fix rtl8211e rx/tx delay config") network is broken on the FriendlyELEC(ARM) ZeroPi. Replaces custom patches with upstream uboot patch: https://source.denx.de/u-boot/u-boot/-/commit/2527b24f39d8f27ba2fd922ca27a1f14119cfa1b Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com>
* mbedtls: Update to version 2.28.3Hauke Mehrtens2023-04-103-96/+90
| | | | | | | | | | | | | | | This only fixes minor problems. Changelog: https://github.com/Mbed-TLS/mbedtls/releases/tag/v2.28.3 The 100-fix-compile.patch patch was merged upstream, see: https://github.com/Mbed-TLS/mbedtls/issues/6243 https://github.com/Mbed-TLS/mbedtls/pull/7013 The code style of all files in mbedtls 2.28.3 was changed. I took a new version of the 100-x509-crt-verify-SAN-iPAddress.patch patch from this pull request: https://github.com/Mbed-TLS/mbedtls/pull/6475 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: crypto: fix missing dependecies for CRYPTO_USER_API_ENABLE_OBSOLETEPetr Štetiar2023-04-101-1/+2
| | | | | | | CRYPTO_USER_API_ENABLE_OBSOLETE config symbol depends on CRYPTO_USER so lets add this dependency to relevant modules. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: crypto: fix architecture specific modulesPetr Štetiar2023-04-101-6/+36
| | | | | | | | | | | | | | While tracking one bug report related to wrong package dependencies I've noticed, that a bunch of the crypto modules are actually not architecture specific, but either board/subtarget (x86/64) or board (mpc85xx) specific. So lets fix it, by making those modules architecture specific: x86/64 -> x86_64 mpc85xx -> powerpc Signed-off-by: Petr Štetiar <ynezz@true.cz>
* libcap: update to 2.68Nick Hainke2023-04-081-2/+2
| | | | | | | Release Notes: https://sites.google.com/site/fullycapable/release-notes-for-libcap#h.vdh3d47czmle Signed-off-by: Nick Hainke <vincent@systemli.org>
* mpc85xx: add support for Enterasys WS-AP3715iDavid Bauer2023-04-081-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: NXP P1010 (1x e500 @ 800MHz) RAM: 256M DDR3 (2x Samsung K4B1G1646G-BCH9) FLASH: 32M NOR (Spansion S25FL256S) BTN: 1x Reset WiFi: 1x Atheros AR9590 2.4 bgn 3x3 2x Atheros AR9590 5.0 an 3x3 ETH: 2x Gigabit Ethernet (Atheros AR8033 / AR8035) UART: 115200 8N1 (RJ-45 Cisco) Installation ------------ 1. Grab the OpenWrt initramfs, rename it to ap3715.bin. Place it in the root directory of a TFTP server and serve it at 192.168.1.66/24. 2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot by pressing Enter when prompted. Credentials are identical to the one in the APs interface. By default it is admin / new2day. 3. Alter the bootcmd in U-Boot: $ setenv ramboot_openwrt "setenv ipaddr 192.168.1.1; setenv serverip 192.168.1.66; tftpboot 0x2000000 ap3715.bin; bootm" $ setenv boot_openwrt "sf probe 0; sf read 0x2000000 0x140000 0x1000000; bootm 0x2000000" $ setenv bootcmd "run boot_openwrt" $ saveenv 4. Boot the initramfs image $ run ramboot_openwrt 5. Transfer the OpenWrt sysupgrade image to the AP using SCP. Install using sysupgrade. $ sysupgrade -n <path-to-sysupgrade.bin> Signed-off-by: David Bauer <mail@david-bauer.net>
* openssl: fix CVE-2023-464 and CVE-2023-465Eneas U de Queiroz2023-04-073-1/+252
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apply two patches fixing low-severity vulnerabilities related to certificate policies validation: - Excessive Resource Usage Verifying X.509 Policy Constraints (CVE-2023-0464) Severity: Low A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems. Policy processing is disabled by default but can be enabled by passing the `-policy' argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()' function. - Invalid certificate policies in leaf certificates are silently ignored (CVE-2023-0465) Severity: Low Applications that use a non-default option when verifying certificates may be vulnerable to an attack from a malicious CA to circumvent certain checks. Invalid certificate policies in leaf certificates are silently ignored by OpenSSL and other certificate policy checks are skipped for that certificate. A malicious CA could use this to deliberately assert invalid certificate policies in order to circumvent policy checking on the certificate altogether. Policy processing is disabled by default but can be enabled by passing the `-policy' argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()' function. Note: OpenSSL also released a fix for low-severity security advisory CVE-2023-466. It is not included here because the fix only changes the documentation, which is not built nor included in any OpenWrt package. Due to the low-severity of these issues, there will be not be an immediate new release of OpenSSL. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* mac80211: ath11k: Fix invalid mgmt rx frame length issueRobert Marko2023-04-071-0/+202
| | | | | | | | | FW 2.9 uses multiple TLV-s for the RX mgmt even which driver currently does not support, so import a pending upstream patch to fix that [1]. [1] https://patchwork.kernel.org/project/linux-wireless/patch/20230320133840.30162-1-quic_nmaran@quicinc.com/ Signed-off-by: Robert Marko <robimarko@gmail.com>
* ath11k-firmware: update to WLAN.HK.2.9.0.1-01385-QCAHKSWPL_SILICONZ-1Robert Marko2023-04-071-7/+18
| | | | | | | | | | | | | | | | | | | Current WLAN.HK.2.5.0.1 FW is quite old and buggy, but we had to hold off from updating to 2.6.0.1 and 2.7.0.1 as they had compatibility regressions, but now QCA finally released 2.9.0.1 FW which is working on all of the boards. So finally update IPQ8074 and QCN9074 FW to the latest WLAN.HK.2.9.0.1-01385-QCAHKSWPL_SILICONZ-1 firmware. In order to do so, we have to switch to using QCA-s QUIC repo instead of Kalle-s. QCA-s QUIC repo does not have BDF-s so we have to get the QCN9074 BDF from Kalles repo. Tested-by: Mireia Fernández Casals <meirin.f@gmail.com> # Xiaomi AX3600 Tested-by: Francisco G Luna <frangonlun@gmail.com> #Netgear WAX218 Signed-off-by: Robert Marko <robimarko@gmail.com>
* openssl: add legacy providerEneas U de Queiroz2023-04-058-45/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adapts the engine build infrastructure to allow building providers, and packages the legacy provider. Providers are the successors of engines, which have been deprecated. The legacy provider supplies OpenSSL implementations of algorithms that have been deemed legacy, including DES, IDEA, MDC2, SEED, and Whirlpool. Even though these algorithms are implemented in a separate package, their removal makes the regular library smaller by 3%, so the build options will remain to allow lean custom builds. Their defaults will change to 'y' if not bulding for a small flash, so that the regular legacy package will contain a complete set of algorithms. The engine build and configuration structure was changed to accomodate providers, and adapt to the new style of openssl.cnf in version 3.0. There is not a clean upgrade path for the /etc/ssl/openssl.cnf file, installed by the openssl-conf package. It is recommended to rename or remove the old config file when flashing an image with the updated openssl-conf package, then apply the changes manually. An old openssl.cnf file will silently work, but new engine or provider packages will not be enabled. Any remaining engine config files under /etc/ssl/engines.cnf.d can be removed. On the build side, the include file used by engine packages was renamed to openssl-module.mk, so the engine packages in other feeds need to adapt. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* openssl: make UCI config aware of built-in enginesEneas U de Queiroz2023-04-052-8/+43
| | | | | | | | | Engines that are built into the main libcrypto OpenSSL library can't be disabled through UCI. Add a 'builtin' setting to signal that the engine can't be disabled through UCI, and show a message explaining this in case buitin=1 and enabled=0. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* openssl: avoid OPENSSL_SMALL_FOOTPRINT, no-asmEneas U de Queiroz2023-04-052-4/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Building openssl with OPENSSL_SMALL_FOOTPRINT yelds only from 1% to 3% decrease in size, dropping performance from 2% to 91%, depending on the target and algorithm. For example, using AES256-GCM with 1456-bytes operations, X86_64 appears to be the least affected with 2% performance penalty and 1% reduction in size; mips drops performance by 13%, size by 3%; Arm drops 29% in performance, 2% in size. On aarch64, it slows down ghash so much that I consider it broken (-91%). SMALL_FOOTPRINT will reduce AES256-GCM performance by 88%, and size by only 1%. It makes an AES-capable CPU run AES128-GCM at 35% of the speed of Chacha20-Poly1305: Block-size=1456 bytes AES256-GCM AES128-GCM ChaCha20-Poly1305 SMALL_FOOTPRINT 62014.44 65063.23 177090.50 regular 504220.08 565630.28 182706.16 OpenSSL 1.1.1 numbers are about the same, so this should have been noticed a long time ago. This creates an option to use OPENSSL_SMALL_FOOTPRINT, but it is turned off by default unless SMALL_FLASH or LOW_MEMORY_FOOTPRINT is used. Compiling with -O3 instead of -Os, for comparison, will increase size by about 14-15%, with no measureable effect on AES256-GCM performance, and about 2% increase in Chacha20-Poly1305 performance on Aarch64. There are no Arm devices with the small flash feature, so drop the conditional default. The package is built on phase2, so even if we include an Arm device with small flash later, a no-asm library would have to be built from source anyway. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* odhcpd: bump to latest git HEADChristian Marangi2023-04-041-3/+3
| | | | | | | | | 40ab806 config: use dedicated link local function to check interface a84bff2 netlink: add support for getting interface linklocal 2ea065f Revert "config: recheck have_link_local on interface reload if already init" 4b38e6b config: fix feature for enabling service only when interface RUNNING Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* uqmi: explicitly disconnect IPv6 address familyLech Perczak2023-04-021-0/+1
| | | | | | | | | | Some modems (namely, Telit LE910C4) require the IPv6 connection state to be cleared explicitly, to avoid reporting "no effect" if IPv6 connection is already connected through autoconnect mechanism, or during LTE default bearer attach, which would lead to established session, but without a way to inform protocol handler of the status. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* uqmi: set IPv6 family explicitly in status checkLech Perczak2023-04-021-1/+1
| | | | | | | | | | Some modems require CID to be set explicitly during IPv6 connection status check, others require IPv6 address family to be checked explicitly after establishing connection, in order to provide correct status. Set both fields in the request to satisfy them. Fixes: c8a88118af46 ("uqmi: set CID during 'query-data-status' operation") Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* libnl-tiny: update to the latest versionHauke Mehrtens2023-04-021-3/+3
| | | | | | | f5d9b7e libnl-tiny: fix duplicated branch in family.h 11b7c5f attr: add NLA_S* definitions Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* netifd: strip mask from IP address in DHCP client paramsAndrey Erokhin2023-04-011-1/+1
| | | | | | | ipaddr option can be in CIDR notation, but udhcp wants just an IP address Signed-off-by: Andrey Erokhin <a.erokhin@inango-systems.com>
* dnsmasq: configure dynamic dhcp6 and dhcp4 independentlyIan Dall2023-04-011-2/+4
| | | | | | | | Given ipv6 has SLAAC it is quite plausible to wish to use dynamic dhcp4 but static dhcp6. This patch keeps dynamicdhcp as the default option for both, but is overridden by dynamicdhcpv6 or dynamicdhcpv4 Signed-off-by: Ian Dall <ian@beware.dropbear.id.au>
* dnsmasq: add dhcphostsfile to ujail sandboxRuben Jenster2023-04-011-0/+1
| | | | | | | The dhcphostsfile must be mounted into the (ujail) sandbox. The file can not be accessed without this mount. Signed-off-by: Ruben Jenster <rjenster@gmail.com>
* kernel: modules: tg3: limit to devices with pci supportAleksander Jan Bajkowski2023-04-011-1/+1
| | | | | | | | Kmod-tg3 supports Ethernet adapters over PCIe bus. On targets without PCI support, this package is empty. Symbol CONFIG_TIGON3 depends on CONFIG_PCI. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: modules: hfcpci: limit to devices with pci supportAleksander Jan Bajkowski2023-04-011-2/+2
| | | | | | | | Kmod-hfcpci and kmod-hfcmulti supports ISDN adapters over PCI. On targets without PCI support, this package is empty. Symbol CONFIG_MISDN_HFCMULTI and CONFIG_MISDN_HFCPCI depends on CONFIG_PCI. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* libtraceevent: update to 1.7.2Nick Hainke2023-04-011-2/+2
| | | | | | | | | | | Changes: 1c6f0f3 libtraceevent: version 1.7.2 73f6a8a libtraceevent: Fix some missing commas in big endian blocks da2ea6b libtraceevent: Rename "ok" to "token_has_paren" in process_sizeof() e6f7cfa libtraceevent: No need for testing ok in else if (!ok) in process_sizeof() a4b1ba5 libtraceevent: Fix double free in parsing sizeof() Signed-off-by: Nick Hainke <vincent@systemli.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 21:55:39 +0000