aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* kernel: modules: fix mdio-bus-mux descriptionLuiz Angelo Daros de Luca2023-06-131-1/+1
| | | | | | | | Simple error during copy/paste Fixes: 2dbeb607251b ("kernel: add mdio-bus-mux support") Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> (cherry picked from commit 1e4bc13eaa3fdba897ca1721b2bfe9f2dbb30770)
* grub2: enable EFI for armvirtMathew McBride2023-06-132-6/+36
| | | | | | | | | | | | This adds a separate package for EFI on Arm SystemReady compatible machines. 32-bit Arm UEFI is supported as well. It is very similar to x86-64 EFI setup, without the need for BIOS backward compatibility and slightly different default modules. Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit 8f29b1573ddf3b7ed7c53bee1a7d55e574806205)
* ipq807x: add initial support for prpl Foundation Haze boardPetr Štetiar2023-06-121-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Haze is prpl Foundation's reference board (WNC LVRP). Board info: - IPQ8072A SoC - 2 GiB RAM - 4 GiB eMMC - 8MiB SPI NOR (MX25U6435F) - 3x 1GigE ports (QCA8075) - 1x 10GigE port (AQR113C) - 1x SFP cage - WiFi 6GHz 160MHz (QCN9074) - WiFi 5GHz 80+80MHz (QCN5054) - WiFi 2.4G (QCN5024) - ARM Standard 20-pin 2.54mm/0.1" JTAG (1V8 !!!) - Bluetooth v5.0 + EDR with integrated Class 1 PA (CYW20704) - 1x M.2 B-key socket with PCIe 3.0 - 1x USB 3.0 port - UART marked J6 is 4-pin 2.54mm/0.1" connector 3V3(arrow),RX,TX,GND (115200 8N1) - Reset and WPS buttons Flashing instructions: 1. From U-Boot boot OpenWrt using initramfs image: IPQ807x# tftpboot openwrt-ipq807x-generic-prpl_haze-initramfs-uImage.itb && bootm 2. In OpenWrt running from initramfs execute sysupgrade: root@OpenWrt:/# sysupgrade -n /tmp/openwrt-ipq807x-generic-prpl_haze-squashfs-sysupgrade.bin Work in progress/known issues: * SFP feature not implemented/tested * M.2 feature not implemented/tested * Bluetooth feature not implemented/tested * 6GHz wireless should be working, but not tested * MAC address assigments for LAN interfaces Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 2e910039dd7170fd28641e7686c376dba6f0d8a5)
* ipq-wifi: update to version 2023-06-03Petr Štetiar2023-06-121-3/+5
| | | | | | | | | | | | | | Contains following updates: * ipq8074: update RegDB in new submitted BDF * Revert "ipq8074: update RegDB in new submitted BDF" * qcn9074: update RegDB in new submitted BDF * ipq8074: update RegDB in new submitted BDF * qca-wireless: ipq40xx: add BDFs for ZTE MF287+ * Add BDFs for prpl Foundation Haze board Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit c2bb9f055b252f167d58540bddb9e5e9586fa986)
* ipq-wifi: bump to latest git HEADAntti Nykänen2023-06-121-3/+5
| | | | | | | | | | | 0f73d32 ipq8074: update RegDB in new submitted BDF a4cd21f ipq8074: add Compex WPQ873 BDF c888dd0 qca-wireless: ipq40xx: Add BDFs for Eero Cento 6388ba9 ipq8074: update regdb for Netgear SXK80 BDF 77775d2 ipq8074: add Netgear SXK80 Signed-off-by: Antti Nykänen <antti.nykanen@nokia.com> (cherry picked from commit 86e7614e0deb5e97083103600b045833c6517c6b)
* qca-nss-dp: fix oops in nss_dp_probePetr Štetiar2023-06-121-2/+3
| | | | | | | | | | | | | | | | | | | | Currently kernel crashes when of_phy_connect has issues: Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000308 ... pc : phy_attached_print+0x28/0x1b0 lr : phy_attached_info+0x14/0x20 ... Call trace: phy_attached_print+0x28/0x1b0 phy_attached_info+0x14/0x20 nss_dp_adjust_link+0x544/0x6c4 [qca_nss_dp] of_phy_connect returns either pointer or NULL, so can't be checked with IS_ERR macro. Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 38c7cf0e69aeefdec44d513307732e4daf7d9794)
* libubox: update to the latest versionFelix Fietkau2023-06-121-3/+3
| | | | | | | | | | | | | b09b316aeaf6 blobmsg: add blobmsg_parse_attr function eac92a4d5d82 blobmsg: add blobmsg_parse_array_attr ef5e8e38bd38 usock: fix poll return code check 6fc29d1c4292 jshn.sh: Add pretty-printing to json_dump 5893cf78da40 blobmsg: Don't do at run-time what can be done at compile-time 362951a2d96e uloop: fix uloop_run_timeout 75a3b870cace uloop: add support for integrating with a different event loop Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit b6e0a24c492537e5bbfa015e2a3638ccc53c164b)
* unetd: update to the latest versionFelix Fietkau2023-06-121-3/+3
| | | | | | | | | | | | 412d03012f13 network: prevent adding endpoint routes for addresses on the network faaf9cee6ef4 utils: fix ipv4 checksum issue 0e1c2fad3540 pex-msg: fix memory leak on fread fail in pex_msg_update_request_init 51be0ed659d0 host: fix crash parsing gateway when no endpoint is specified ca17601dc24e wg-linux: add support for splitting netlink messages for allowed ips 7d3986b7a5a2 wg-linux: increase default messages size Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 7b1e8983365746876034534ef22004d423c390e0)
* mac80211: ath11k: sync with ath-nextRobert Marko2023-06-1218-8/+2691
| | | | | | | | | | | Synchronize the ath11k backports with the current ath-next tree. This introduces support for MBSSID and EMA, adds factory test mode and some new HTT stats. Tested-by: Francisco G Luna <frangonlun@gmail.com> Signed-off-by: Robert Marko <robimarko@gmail.com> (cherry picked from commit acde5271a68835f51185aae1b11343439a9d4cab)
* mac80211: backport EMA beacon supportRobert Marko2023-06-122-2/+374
| | | | | | | | | Backport EMA beacon support from kernel 6.4. It is required for MBSSID/EMA suport in ath11k that will follow. Tested-by: Francisco G Luna <frangonlun@gmail.com> Signed-off-by: Robert Marko <robimarko@gmail.com> (cherry picked from commit 84b5735b4c59c8fcb3db647430a4ffd574fb10a3)
* kernel: add mdio-bus-mux supportMathew McBride2023-06-121-0/+15
| | | | | | | | | | The MDIO bus multiplexing framework is used by some drivers such as dwmac-sun8i. As this is a per-driver requirement, set it to be hidden in the menu. Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit 2dbeb607251b75b506dcc8f1294cd9ed0bac9694)
* restool: update source.codeaurora.org repository linkChristian Marangi2023-06-111-1/+1
| | | | | | | | | source.codeaurora.org project has been shut down and the nxp repositories has been moved to github. Update the repository link to the new location. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 0a1ee5323549bfce30b4d42be2dcc461f694881c)
* ls-dpl: update source.codeaurora.org repository linkChristian Marangi2023-06-111-1/+1
| | | | | | | | | source.codeaurora.org project has been shut down and the nxp repositories has been moved to github. Update the repository link to the new location. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 52fd8d8ba3ed4d34ed1dbc9d14fc7754960a576d)
* uboot-mediatek: adapt BPi-R3 and BPi-R64 to new device tree overlayDaniel Golle2023-06-092-20/+40
| | | | | | | | | Update bootloader environment for BPi-R3 and BPi-R64 to adapt to new device tree overlay mechanism now that support for multiple device tree overlays has been added. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit ec50d2d366fecb6f4bac2ae9d5cfa4aba9cf7bbc)
* openssl: update to 3.0.9Ivan Pavlov2023-06-095-294/+4
| | | | | | | | | | | | | | | CVE-2023-2650 fix Remove upstreamed patches Major changes between OpenSSL 3.0.8 and OpenSSL 3.0.9 [30 May 2023] * Mitigate for very slow OBJ_obj2txt() performance with gigantic OBJECT IDENTIFIER sub-identities. (CVE-2023-2650) * Fixed buffer overread in AES-XTS decryption on ARM 64 bit platforms (CVE-2023-1255) * Fixed documentation of X509_VERIFY_PARAM_add0_policy() (CVE-2023-0466) * Fixed handling of invalid certificate policies in leaf certificates (CVE-2023-0465) * Limited the number of nodes created in a policy tree (CVE-2023-0464) Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com> (cherry picked from commit 6348850f10545aac70db94d3a9555a4f2eb84281)
* valgrind: update to 3.21.0Hauke Mehrtens2023-06-094-13/+25
| | | | | | | | | | | Release Notes: https://valgrind.org/docs/manual/dist.news.html This improves support for the memory allocator used in musl libc 1.2.2 and later which is currently used by OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit d85013460d47b538389b08506fda49e96a1968b5)
* kselftests-bpf: add kernel BPF testsTony Ambardar2023-06-091-0/+63
| | | | | | | | | | | | | | Build and package kernel self-tests used for BPF testing, program and JIT development. This package, together with the existing 'kmod-bpf-test', was extensively used for past upstream Linux JIT submissions [1]. Currently this includes only 'test_verifier'; building 'test_progs' will fail due to known endian limitations with bpftool skeletons. [1]:https://lore.kernel.org/bpf/cover.1633392335.git.Tony.Ambardar@gmail.com Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit 3886ea9b87c416c080078603fedea95bcc144442)
* base-files: enable BPF JIT kallsyms by defaultTony Ambardar2023-06-091-0/+1
| | | | | | | | | | | Set net.core.bpf_jit_kallsyms=1 in /etc/sysctl.d/10-default.conf. For privileged users, this exports addresses of JIT-compiled programs to appear in /proc/kallsyms when present, allowing their use for debugging and in traces. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit b3aaede2a7b14f2be850db8ae0c826e2782a60e8)
* uboot-rockchip: add Orange Pi R1 Plus LTS supportTianling Shen2023-06-095-0/+499
| | | | | | | | | Add support for the Xunlong Orange Pi R1 Plus LTS. Manually generated of-platdata files to avoid swig dependency. Tested-by: Volkan Yetik <no3iverson@gmail.com> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit 37fed89166e6e21c20ef92b36106f7184a0476c6)
* uboot-rockchip: add Orange Pi R1 Plus supportTianling Shen2023-06-095-0/+821
| | | | | | | | Add support for the Xunlong Orange Pi R1 Plus. Manually generated of-platdata files to avoid swig dependency. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit 043f8a4f5ecf00e8a62b5a5d48baba48e620ea6a)
* openssl: fix uci config for built-in enginesTianling Shen2023-06-081-10/+3
| | | | | | | | | | | | | | | | | | | | | | | | Built-in engine configs are added in libopenssl-conf/install stage already, postinst/add_engine_config is just duplicating them, and due to the lack of `config` header it results a broken uci config: > uci: Parse error (invalid command) at line 3, byte 0 ``` config engine 'devcrypto' option enabled '1' engine 'devcrypto' option enabled '1' option builtin '1' ``` Add `builtin` option in libopenssl-conf/install stage and remove duplicate engine configuration in postinst/add_engine_config to fix this issue. Fixes: 0b70d55a64c39d ("openssl: make UCI config aware of built-in engines") Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit a0d71934253f599f4ac651b1b3a429901049e802)
* netfilter: fix typo in kmod-nft-dup-inetKevin Darbyshire-Bryant2023-06-081-1/+1
| | | | | | | Fix typo of 'family' in a7e9445975 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 191742eb8ddc4353eedf71a327fb17a11c5a3a99)
* ubnt-ledbar: depend on mediatek and ramips subtargetsTomasz Maciej Nowak2023-06-081-1/+1
| | | | | | | | It's only used on devices in mt7621 and mt7622 subtargets, so no reason to compile it for others. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (cherry picked from commit e81298463ed45cd03d45837c12f4c0a4b85f6cd4)
* netifd: update to the latest versionFelix Fietkau2023-06-071-3/+3
| | | | | | | ec9dba721245 system-linux: fix memory leak in system_bridge_vlan_check Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 20ce21866e482c132df7085061f28dfdafc8a48a)
* netifd: Fix PKG_MIRROR_HASHHauke Mehrtens2023-06-071-1/+1
| | | | | | | | Fix the PKG_MIRROR_HASH value for netifd. Fixes: d2ecaaca3404 ("netifd: update to version 2023-05-31") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 21f713d5abf86fc5639b41d7f4e7535a5538d63a)
* netifd: update to version 2023-05-31Petr Štetiar2023-06-071-3/+3
| | | | | | | | | | | | Contains following changes: * bridge: bridge_dump_info: add dumping of bridge attributes * bridge: make it more clear why the config was applied * cmake: fix build by reordering the cflags definitions * treewide: fix multiple compiler warnings Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit d2ecaaca3404a05ba65bb6756bc5fbd05389ed2f)
* OpenWrt v23.05.0-rc1: revert to branch defaultsHauke Mehrtens2023-06-071-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v23.05.0-rc1: adjust config defaultsv23.05.0-rc1Hauke Mehrtens2023-06-071-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* selinux-policy: update to 1.2.5Linhui Liu2023-05-312-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | 30d503a uci jsonfilter: pipe and leak e13cb64 rpcd leds 144781f jsonfilter, luci, ubus 1210762 rpcd and all agents get fd's leaked ab9227c rpcd 2f99e0e luci rpcd b43aaf3 rpcd (enable/disable services) luci peeraddr f20f03e rpcd 7bc74f6 rpcd reads all subj state and luci-bwc leaks 9634b17 adds inotify perms to anon_inode 3d3c17c adds bare anon_inode (linux 5.15) 7104b20 dnsmasq and luci 0de2c66 luci,rpcd, ucode, wpad 14f5cf9 luci and ucode e3ce84c rpcd, ucode and cgiio loose ends 96a2401 misc updates 9fe0490 initscript: remove redundant rules 71bd77e allow all init scripts to log to logd f697331 sandbox: make ttydev handling more robust a471877 simplify pty tty console access f738984 sandbox: also remove TIOSCTI from all ttydevs Signed-off-by: Linhui Liu <liulinhui36@gmail.com> (cherry picked from commit 4c5a9da8699a7982b8f03b28561f955d9d1313f1)
* ca-certificates: Update to version 20230311Tianling Shen2023-05-312-13/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the ca-certificates and ca-bundle package from version 20211016 to version 20230311. Use TAR_OPTIONS instead of hacking Build/Prepare, refresh patches. Debian change-log entry [1]: |[...] |[ Đoàn Trần Công Danh ] |* ca-certificates: compat with non-GNU mktemp (closes: #1000847) | |[ Ilya Lipnitskiy ] |* certdata2pem.py: use UTC time when checking cert validity | |[ Julien Cristau ] |* Update Mozilla certificate authority bundle to version 2.60 | The following certificate authorities were added (+): | + "Autoridad de Certificacion Firmaprofesional CIF A62634068" | + "Certainly Root E1" | + "Certainly Root R1" | + "D-TRUST BR Root CA 1 2020" | + "D-TRUST EV Root CA 1 2020" | + "DigiCert TLS ECC P384 Root G5" | + "DigiCert TLS RSA4096 Root G5" | + "E-Tugra Global Root CA ECC v3" | + "E-Tugra Global Root CA RSA v3" | + "HARICA TLS ECC Root CA 2021" | + "HARICA TLS RSA Root CA 2021" | + "HiPKI Root CA - G1" | + "ISRG Root X2" | + "Security Communication ECC RootCA1" | + "Security Communication RootCA3" | + "Telia Root CA v2" | + "TunTrust Root CA" | + "vTrus ECC Root CA" | + "vTrus Root CA" | The following certificate authorities were removed (-): | - "Cybertrust Global Root" (expired) | - "EC-ACC" | - "GlobalSign Root CA - R2" (expired) | - "Hellenic Academic and Research Institutions RootCA 2011" | - "Network Solutions Certificate Authority" | - "Staat der Nederlanden EV Root CA" (expired) |* Drop trailing space from debconf template causing misformatting | (closes: #980821) | |[ Wataru Ashihara ] |* Make certdata2pem.py compatible with cryptography >= 35 (closes: #1008244) |[...] [1]: https://metadata.ftp-master.debian.org/changelogs/main/c/ca-certificates/ca-certificates_20230311_changelog Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit 7c83b6ac8656f9a3b005554d25857e8ed5faf3f6)
* pcre2: fix host compilation of libselinux by enabling PICPetr Štetiar2023-05-311-1/+2
| | | | | | | | | | | | | | | libselinux-3.5 fails to compile in Fedora 38 container due to the following: cc -O2 -I/openwrt/staging_dir/host/include -I/openwrt/staging_dir/hostpkg/include -I/openwrt/staging_dir/target-x86_64_musl/host/include -I../include -D_GNU_SOURCE -DNO_ANDROID_BACKEND -DUSE_PCRE2 -DPCRE2_CODE_UNIT_WIDTH=8 -I/openwrt/staging_dir/hostpkg/include -L/openwrt/staging_dir/host/lib -L/openwrt/staging_dir/hostpkg/lib -L/openwrt/staging_dir/target-x86_64_musl/host/lib -Wl,-rpath=/openwrt/staging_dir/hostpkg/lib -shared -o libselinux.so.1 avc.lo avc_internal.lo avc_sidtab.lo booleans.lo callbacks.lo canonicalize_context.lo checkAccess.lo check_context.lo checkreqprot.lo compute_av.lo compute_create.lo compute_member.lo compute_relabel.lo compute_user.lo context.lo deny_unknown.lo disable.lo enabled.lo fgetfilecon.lo freecon.lo freeconary.lo fsetfilecon.lo get_context_list.lo get_default_type.lo get_initial_context.lo getenforce.lo getfilecon.lo getpeercon.lo init.lo is_customizable_type.lo label.lo label_db.lo label_file.lo label_media.lo label_support.lo label_x.lo lgetfilecon.lo load_policy.lo lsetfilecon.lo mapping.lo matchmediacon.lo matchpathcon.lo policyvers.lo procattr.lo query_user_context.lo regex.lo reject_unknown.lo selinux_check_securetty_context.lo selinux_config.lo selinux_internal.lo selinux_restorecon.lo sestatus.lo setenforce.lo setexecfilecon.lo setfilecon.lo setrans_client.lo seusers.lo sha1.lo stringrep.lo validatetrans.lo -L/openwrt/staging_dir/hostpkg/lib -lpcre2-8 -lfts -ldl -Wl,-soname,libselinux.so.1,--version-script=libselinux.map,-z,defs,-z,relro /usr/bin/ld: /openwrt/staging_dir/hostpkg/lib/libpcre2-8.a(pcre2_compile.c.o): relocation R_X86_64_32S against symbol `_pcre2_ucd_stage1_8' can not be used when making a shared object; recompile with -fPIC /usr/bin/ld: failed to set dynamic section sizes: bad value So lets fix it by enabling build of host static library with the position independent code option enabled. Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 12494f5b8a7bb48cbf7b2fba7d17a53981173120)
* netfilter: add kmod-nft-dup-inetMichał Kwiatek2023-05-311-1/+21
| | | | | | | Add kmod-nft-dup-inet package to allow packet duplication in ip/ip6/inet nftables family Signed-off-by: Michał Kwiatek <michal@kwiatek.it> (cherry picked from commit a7e9445975f832db887e6044d7e84220d2a68cf1)
* package: layerscape: change loadaddr addressPawel Dembicki2023-05-2916-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At this moment loadaddr in most layerscape boards are configured to 0x81000000. 5.15 kernel on some boards is bigger than 5.10 and it cause error: Loading kernel from FIT Image at 81000000 ... Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: ARM64 OpenWrt Linux-5.15.112 Created: 2023-05-21 17:39:35 UTC Type: Kernel Image Compression: gzip compressed Data Start: 0x810000ec Data Size: 7513944 Bytes = 7.2 MiB Architecture: AArch64 OS: Linux Load Address: 0x80000000 Entry Point: 0x80000000 Hash algo: crc32 Hash value: 6fd69550 Hash algo: sha1 Hash value: ee34c753ffb615e199a428762824ad4a0aaef90a Verifying Hash Integrity ... crc32+ sha1+ OK Loading fdt from FIT Image at 81000000 ... Using 'config-1' configuration Trying 'fdt-1' fdt subimage Description: ARM64 OpenWrt fsl_ls1088a-rdb-sdboot device tree blob Created: 2023-05-21 17:39:35 UTC Type: Flat Device Tree Compression: uncompressed Data Start: 0x8172a98c Data Size: 19794 Bytes = 19.3 KiB Architecture: AArch64 Hash algo: crc32 Hash value: 59792ba3 Hash algo: sha1 Hash value: 135585a49f86cd85acea559b78b0098ae99d5e12 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x8172a98c Uncompressing Kernel Image ERROR: new format image overwritten - must RESET the board to recover resetting ... This patch changes loadaddr to 0x88000000 (like LS1012A-FRDM board) to avoid overlapping for bigger images (like initramfs) too. Tested-by: Alexandra Alth <alexandra@alth.de> [LS1088ARDB] Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (cherry picked from commit 0822040671e6177020892e0ddbdfafd4bb3690e0)
* uboot-mediatek: add Qihoo 360T7 supportChukun Pan2023-05-294-0/+477
| | | | | | | | | The vendor uboot will verify firmware at boot. So add a custom uboot build for this device. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (cherry picked from commit c51eb177308835f811ae43b17dde0ea962ed1df1) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: add build for MT7981 DDR3Chukun Pan2023-05-291-0/+47
| | | | | | | | | | Add new build option BOARD_QFN/BOARD_BGA. This option is only useful for MT7981 device. MT7981A/B: BOARD_BGA, MT7981C: BOARD_QFN. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (cherry picked from commit 602cb4f3259cb676fcf6fa6c459d598df643653b) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7981: add reserved memory to support pstoreAlexander Couzens2023-05-291-0/+38
| | | | | | | | | | Add reserved memory for pstore/ramoops to device tree used by Linux as well as U-Boot. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 3eb354f999a3687f9ae547899b0f5ec2b10185ab) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bpftools: update, split off bpftool and libbpf packagesTony Ambardar2023-05-255-57/+92
| | | | | | | | | | | | | | | | My original bpftools package made "variant" builds of bpftool and libbpf as a convenience, since both used the same local kernel sources with the same versioning. This is no longer the case, since the commit below switched to using an out-of-tree build mirror hosting repos for each. Replace bpftools with separate bpftool and libbpf packages, each simplified and correctly versioned. Also fix the broken libbpf ABI introduced in the same commit. Existing build .config files are not impacted. Fixes: 00cbf6f6ab1d ("bpftools: update to standalone bpftools + libbpf, use the latest version") Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit afe1bf11f2539f75e30ab3206891dbe6f8c43bd5) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* busybox: update to 1.36.1Nick Hainke2023-05-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Release Notes: http://lists.busybox.net/pipermail/busybox-cvs/2023-May/041510.html Refresh commands, run after busybox is first built once (nothing changed compared to 1.36.0): cd package/utils/busybox/config/ ../convert_menuconfig.pl ../../../../build_dir/target-mipsel_24kc_musl/busybox-default/busybox-1.36.1 cd .. ./convert_defaults.pl ../../../build_dir/target-mipsel_24kc_musl/busybox-default/busybox-1.36.1/.config > Config-defaults.in Manual edits needed afterward: * Config-defaults.in: OpenWrt config symbol IPV6 logic applied to BUSYBOX_DEFAULT_FEATURE_IPV6 * Config-defaults.in: OpenWrt config TARGET_bcm53xx logic applied to BUSYBOX_DEFAULT_TRUNCATE (commit 547f1ec) * Config-defaults.in: OpenWrt logic applied to BUSYBOX_DEFAULT_LOGIN_SESSION_AS_CHILD (commit dc92917) * Config-defaults.in: correct the default ports that get reset BUSYBOX_DEFAULT_FEATURE_HTTPD_PORT_DEFAULT 80 BUSYBOX_DEFAULT_FEATURE_TELNETD_PORT_DEFAULT 23 * config/editors/Config.in: Add USE_GLIBC dependency to BUSYBOX_CONFIG_FEATURE_VI_REGEX_SEARCH (commit f141090) * config/shell/Config.in: change at "Options common to all shells" the conditional symbol SHELL_ASH --> BUSYBOX_CONFIG_SHELL_ASH (discussion in http://lists.openwrt.org/pipermail/openwrt-devel/2021-January/033140.html Apparently our script does not see the hidden option while prepending config options with "BUSYBOX_CONFIG_" which leads to a missed dependency when the options are later evaluated.) * Edit a few Config.in files by adding quotes to sourced items in config/Config.in, config/networking/Config.in and config/util-linux/Config.in (commit 1da014f) Tested-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 3b76f6eee430a107a0970583c1aa215b35f7e3e4) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libxml2: update to 2.11.4Nick Hainke2023-05-241-2/+2
| | | | | | | | | Release Notes: https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.4 Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit c520d682f02890afb38e43b862ca856e2b933507) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libcap: update to 2.69Nick Hainke2023-05-241-2/+2
| | | | | | | | | | Release Notes: https://sites.google.com/site/fullycapable/release-notes-for-libcap#h.iuvg7sbjg8pe Fixes: CVE-2023-2602 CVE-2023-2603 Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 78c45c1e591ce5aeff9fb7eeae049662c4ac4ef2) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* lldpd: update to 1.0.17Nick Hainke2023-05-241-2/+2
| | | | | | | | | Release Notes: https://github.com/lldpd/lldpd/releases/tag/1.0.17 Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 17fbbafdcbc55d6ab3d357012f336941fa27d43e) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Zyxel EX5601-T0 routerPietro Ameruoso2023-05-241-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zyxel EX5601-T0 specifics -------------- The operator specific firmware running on the Zyxel branded EX5601-T0 includes U-Boot modifications affecting the OpenWrt installation. Partition Table | dev | size | erasesize | name | | ---- | -------- | --------- | ------------- | | mtd0 | 20000000 | 00040000 | "spi0.1" | | mtd1 | 00100000 | 00040000 | "BL2" | | mtd2 | 00080000 | 00040000 | "u-boot-env" | | mtd3 | 00200000 | 00040000 | "Factory" | | mtd4 | 001c0000 | 00040000 | "FIP" | | mtd5 | 00040000 | 00040000 | "zloader" | | mtd6 | 04000000 | 00040000 | "ubi" | | mtd7 | 04000000 | 00040000 | "ubi2" | | mtd8 | 15a80000 | 00040000 | "zyubi" | The router boots BL2 which than loads FIP (u-boot). U-boot has hardcoded a command to always launch Zloader "mtd read zloader 0x46000000" and than "bootm". Bootargs are deactivated. Zloader is the zyxel booloader which allow to dual-boot ubi or ubi2, by default access to zloader is blocked. Too zloader checks that the firmware contains a particolar file called zyfwinfo. Additional details regarding Zloader can be found here: https://hack-gpon.github.io/zyxel/ https://forum.openwrt.org/t/adding-openwrt-support-for-zyxel-ex5601-t0/155914 Hardware -------- SOC: MediaTek MT7986a CPU: 4 core cortex-a53 (2000MHz) RAM: 1GB DDR4 FLASH: 512MB SPI-NAND (Micron xxx) WIFI: Wifi6 Mediatek MT7976 802.11ax 5 GHz 4x4 + 2.4GHZ 4x4 ETH: MediaTek MT7531 Switch + SoC 3 x builtin 1G phy (lan1, lan2, lan3) 1 x MaxLinear GPY211B 2.5 N-Base-T phy5 (lan4) 1 x MaxLinear GPY211B 2.5Gbit xor SFP/N-Base-T phy6 (wan) USB: 1 x USB 3.2 Enhanced SuperSpeed port UART: 3V3 115200 8N1 (Pinout: GND KEY RX TX VCC) VOIP: 2 FXS ports for analog phones MAC Address Table ----------------- eth0/lan Factory 0x002a eth1/wan Factory 0x0024 wifi 2.4Ghz Factory 0x0004 wifi 5Ghz Factory 0x0004 + 1 Serial console (UART) --------------------- +-------+-------+-------+-------+-------+ | +3.3V | RX | TX | KEY | GND | +---+---+-------+-------+-------+-------+ | +--- Don't connect Installation ------------ Keep in mind that openwrt can only run on the UBI partition, the openwrt firmware is not able to understand the zloader bootargs. The procedure allows restoring the UBI partition with the Zyxel firmware and retains all the OEM functionalities. 1. Unlock Zloader (this will allow to swap manually between partitions UBI and UBI2): - Attach a usb-ttl adapter to your computer and boot the router. - While the router is booting at some point you will read the following: `Please press Enter to activate this console.` - As soon as you read that press enter, type root and than press enter again (just do it, don't care about the logs scrolling). - Most likely the router is still printing the boot log, leave it boot until it stops. - If everything went ok you should have full root access "root@EX5601-T0:/#". - Type the following command and press enter: "fw_setenv EngDebugFlag 0x1". - Reboot the router. - As soon as you read `Hit any key to stop autoboot:` press Enter. - If everything went ok you should have the following prompt: "ZHAL>". - You have successfully unlocked zloader access, this procedure must be done only once. 2. Check the current active partition: - Boot the router and repeat the steps above to gain root access. - Type the following command to check the current active image: "cat /proc/cmdline". - If `rootubi=ubi` it means that the active partition is `mtd6` - If `rootubi=ubi2` it means that the active partition is `mtd7` - As mentioned earlier we need to flash openwrt into ubi/mtd6 and never overwrite ubi2/mtd7 to be able to fully roll-back. - To activate and boot from mtd7 (ubi2) enter into ZHAL> command prompt and type the following commands: atbt 1 # unlock write atsw # swap boot partition atsr # reboot the router - After rebooting check again with "cat /proc/cmdline" that you are correctly booting from mtd7/ubi2 - If yes proceed with the installation guide. If not probably you don't have a firmware into ubi2 or you did something wrong. 3. Flashing: - Download the sysupgrade file for the router from openwrt, than we need to add the zyfwinfo file into the sysupgrade tar. Zloader only checks for the magic (which is a fixed value 'EXYZ') and the crc of the file itself (256bytes). I created a script to create a valid zyfwinfo file but you can use anything that does exactly the same: https://raw.githubusercontent.com/pameruoso/OpenWRT-Zyxel-EX5601-T0/main/gen_zyfwinfo.sh - Add the zyfwinfo file into the sysupgrade tar. - Enter via telnet or ssh into the router with admin credentials - Enter the following commands to disable the firmware and model checks "zycli fwidcheck off" and "zycli modelcheck off" - Open the router web interface and in the update firmware page select the "restore default settings option" - Select the sysupgrade file and click on upload. - The router will flash and reboot itself into openwrt from UBI 4. Restoring and going back to Zyxel firmware. - Use the ZHAL> command line to manually swap the boot parition to UBI2 with the following: atbt 1 # unlock write atsw # swap boot partition atsr # reboot the router - You will boot again the Zyxel firmware you have into UBI2 and you can flash the zyxel firmware to overwrite the UBI partition and openwrt. Working features ---------------- 3 gbit lan ports Wifi Zyxel partitioning for coexistance with Zloader and dual boot. WAN SFP port (only after exporting pins 57 and 10. gpiobase411) leds reset button serial interface usb port lan ethernet 2.5 gbit port (autosense) wan ethernet 2.5 gbit port (autosense) Not working ---------------- voip (missing drivers or proper zyxel platform software) Swapping the wan ethernet/sfp xor port ---------------- The way to swap the wan port between sfp and ethernet is the following: export the pins 57 and 10. Pin 57 is used to probe if an sfp is present. If pin 57 value is 0 it means that an sfp is present into the cage (cat /sys/class/gpio/gpio468/value). If pin 57 value is 1 it means that no sfp is inserted into the cage. In conclusion by default both 57 an 10 pins are by default 1, which means that the active port is the ethernet one. After inserting an SFP pin 57 will become 0 and you have to manually change the value of pin 10 to 0 too. This is totally scriptable of course. Leds description ------------ All the leds are working out of the box but the leds managed by the 2 maxlinear phy (phy 5 lan, phy6 wan). To activate the phy5 led (rj45 ethernet port led on the back of the router) you have to use mdio-tools. To activate the phy6 led (led on the front of the router for 2.5gbit link) you have to use mdio-tools. Example: Set lan5 led to fast blink on 2500/1000, slow blink on 10/100: mdio mdio-bus mmd 5:30 raw 0x0001 0x33FC Set wan 2.5gbit led to constant on when wan is 2.5gbit: mdio mdio-bus mmd 6:30 raw 0x0001 0x0080 Signed-off-by: Pietro Ameruoso <p.ameruoso@live.it> (cherry picked from commit 1c05388ab04c934ec240e8362321908f91381a90) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: add support for D-Link DIR-859 A3Shiji Yang2023-05-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SOC: QCA9563 775 MHz + QCA9880 Switch: QCA8337N-AL3C RAM: Winbond W9751G6KB-25 64 MiB Flash: Winbond W25Q128FVSG 16 MiB WLAN: Wi-Fi4 2.4 GHz 3*3 + 5 GHz 3*3 LAN: LAN ports *4 WAN: WAN port *1 Buttons: reset *1 + wps *1 LEDs: ethernet *5, power, wlan, wps MAC Address: use address source1 source2 label 40:9b:xx:xx:xx:3c lan && wlan u-boot,env@ethaddr lan 40:9b:xx:xx:xx:3c devdata@0x3f $label wan 40:9b:xx:xx:xx:3f devdata@0x8f $label + 3 wlan2g 40:9b:xx:xx:xx:3c devdata@0x5b $label wlan5g 40:9b:xx:xx:xx:3e devdata@0x76 $label + 2 Install via Web UI: Apply factory image in the stock firmware's Web UI. Install via Emergency Room Mode: DIR-859 A1 will enter recovery mode when the system fails to boot or press reset button for about 10 seconds. First, set computer IP to 192.168.0.5 and Gateway to 192.168.0.1. Then we can open http://192.168.0.1 in the web browser to upload OpenWrt factory image or stock firmware. Some modern browsers may need to turn on compatibility mode. Signed-off-by: Shiji Yang <yangshiji66@qq.com> (cherry picked from commit 0ffbef9317a1dc049ad259c1ec1530355efc0552) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: improve support for D-Link DIR-8x9 A1 seriesShiji Yang2023-05-241-0/+2
| | | | | | | | | | | | | | | | 1. Remove unnecessary new lines in the dts. 2. Remove duplicate included file "gpio.h" in the device dts. 3. Add missing button labels "reset" and "wps". 4. Unify the format of the reg properties. 5. Add u-boot environment support. 6. Reduce spi clock frequency since the max value suggested by the chip datasheet is only 25 MHz. 7. Add seama header fixup for DIR-859 A1. Without this header fixup, u-boot checksum for kernel will fail after the first boot. Signed-off-by: Shiji Yang <yangshiji66@qq.com> (cherry picked from commit e5d8739aa846db621b6368ba83db17c353a35dea) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uml: exclude some /arch/x86 optimizationsChristian Lamparter2023-05-241-0/+6
| | | | | | | | | | | | | The x86_64 UML target wants to include SSSE3 optimized crypto code which lives under /arch/x86/crypto. However, these are not built and this causes an error. | ERROR: module '[...]/arch/x86/crypto/sha512-ssse3.ko' is missing. | make[3]: *** [modules/crypto.mk:990: [...]/kmod-crypto-sha512_5.15.112-1_x86_64.ipk] Error 1 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 959563fb813890e478bf0a51523cd84d54b9af91) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: brcm: drop brcmfmac patch waiting for register_wiphy()Rafał Miłecki2023-05-242-65/+1
| | | | | | | | | | | | | | | | That was a workaround for OpenWrt generation of config files. This patch was used to postpone returning from probe function until loading firmware and calling register_wiphy(). All of that is not needed anymore thanks to the ieee80211 hotplug.d script introduced in the commit 5f8f8a366136 ("base-files, mac80211, broadcom-wl: wifi detection and configuration"). That takes care of generating /etc/config/wireless entries even if wireless device appears late in the booting process. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit bd262663142e90f64f1c256b3e6b2b979c1022c0) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: qca-ssdk: backport support for building as kernel moduleRobert Marko2023-05-234-2/+340
| | | | | | | | | | | | | | | Currently, SSDK is rather special in the sense that its not being built as a proper out of tree module at all but rather like a userspace application and that involves a lot of make magic which unfortunately broke with make version 4.4 and newer. Luckily QCA finally added a way to build SSDK as an out of tree module and it uses the kernel buildsystem which makes it compile with make 4.4 as well. So lets backport the support for it and switch to using it. Signed-off-by: Robert Marko <robimarko@gmail.com> (cherry picked from commit 957f1ee85eb243c5c7397b1e3842a3c61a6b852f)
* OpenWrt v23.05: set branch defaultsChristian Marangi2023-05-211-1/+1
| | | | Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* firmware: intel-microcode: update to 20230512Christian Lamparter2023-05-211-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Debian changelog: intel-microcode (3.20230512.1) unstable; urgency=medium * New upstream microcode datafile 20230512 (closes: #1036013) * Includes fixes or mitigations for an undisclosed security issue * New microcodes: sig 0x000906a4, pf_mask 0x40, 2022-10-12, rev 0x0004, size 115712 sig 0x000b06e0, pf_mask 0x01, 2022-12-19, rev 0x0010, size 134144 * Updated microcodes: sig 0x00050653, pf_mask 0x97, 2022-12-21, rev 0x1000171, size 36864 sig 0x00050654, pf_mask 0xb7, 2022-12-21, rev 0x2006f05, size 44032 sig 0x00050656, pf_mask 0xbf, 2022-12-21, rev 0x4003501, size 37888 sig 0x00050657, pf_mask 0xbf, 2022-12-21, rev 0x5003501, size 37888 sig 0x0005065b, pf_mask 0xbf, 2022-12-21, rev 0x7002601, size 29696 sig 0x000606a6, pf_mask 0x87, 2022-12-28, rev 0xd000390, size 296960 sig 0x000706e5, pf_mask 0x80, 2022-12-25, rev 0x00ba, size 113664 sig 0x000806a1, pf_mask 0x10, 2023-01-13, rev 0x0033, size 34816 sig 0x000806c1, pf_mask 0x80, 2022-12-28, rev 0x00aa, size 110592 sig 0x000806c2, pf_mask 0xc2, 2022-12-28, rev 0x002a, size 97280 sig 0x000806d1, pf_mask 0xc2, 2022-12-28, rev 0x0044, size 102400 sig 0x000806e9, pf_mask 0xc0, 2022-12-26, rev 0x00f2, size 105472 sig 0x000806e9, pf_mask 0x10, 2023-01-02, rev 0x00f2, size 105472 sig 0x000806ea, pf_mask 0xc0, 2022-12-26, rev 0x00f2, size 105472 sig 0x000806eb, pf_mask 0xd0, 2022-12-26, rev 0x00f2, size 105472 sig 0x000806ec, pf_mask 0x94, 2022-12-26, rev 0x00f6, size 105472 sig 0x000806f8, pf_mask 0x87, 2023-03-13, rev 0x2b000461, size 564224 sig 0x000806f7, pf_mask 0x87, 2023-03-13, rev 0x2b000461 sig 0x000806f6, pf_mask 0x87, 2023-03-13, rev 0x2b000461 sig 0x000806f5, pf_mask 0x87, 2023-03-13, rev 0x2b000461 sig 0x000806f4, pf_mask 0x87, 2023-03-13, rev 0x2b000461 sig 0x000806f8, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1, size 595968 sig 0x000806f6, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1 sig 0x000806f5, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1 sig 0x000806f4, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1 sig 0x000906a3, pf_mask 0x80, 2023-02-14, rev 0x042a, size 218112 sig 0x000906a4, pf_mask 0x80, 2023-02-14, rev 0x042a sig 0x000906e9, pf_mask 0x2a, 2022-12-26, rev 0x00f2, size 108544 sig 0x000906ea, pf_mask 0x22, 2023-01-12, rev 0x00f2, size 104448 sig 0x000906eb, pf_mask 0x02, 2022-12-26, rev 0x00f2, size 105472 sig 0x000906ec, pf_mask 0x22, 2023-01-12, rev 0x00f2, size 104448 sig 0x000906ed, pf_mask 0x22, 2023-02-05, rev 0x00f8, size 104448 sig 0x000a0652, pf_mask 0x20, 2022-12-27, rev 0x00f6, size 96256 sig 0x000a0653, pf_mask 0x22, 2023-01-01, rev 0x00f6, size 97280 sig 0x000a0655, pf_mask 0x22, 2022-12-26, rev 0x00f6, size 96256 sig 0x000a0660, pf_mask 0x80, 2022-12-26, rev 0x00f6, size 97280 sig 0x000a0661, pf_mask 0x80, 2022-12-26, rev 0x00f6, size 96256 sig 0x000a0671, pf_mask 0x02, 2022-12-25, rev 0x0058, size 103424 sig 0x000b0671, pf_mask 0x32, 2023-02-06, rev 0x0113, size 207872 sig 0x000b06a2, pf_mask 0xc0, 2023-02-22, rev 0x4112, size 212992 sig 0x000b06a3, pf_mask 0xc0, 2023-02-22, rev 0x4112 * source: update symlinks to reflect id of the latest release, 20230512 -- Henrique de Moraes Holschuh <hmh@debian.org> Tue, 16 May 2023 00:13:02 -0300 intel-microcode (3.20230214.1) unstable; urgency=medium * Non-maintainer upload. * New upstream microcode datafile 20230214 - Includes Fixes for: (Closes: #1031334) - INTEL-SA-00700: CVE-2022-21216 - INTEL-SA-00730: CVE-2022-33972 - INTEL-SA-00738: CVE-2022-33196 - INTEL-SA-00767: CVE-2022-38090 * New Microcodes: sig 0x000806f4, pf_mask 0x10, 2022-12-19, rev 0x2c000170 sig 0x000806f4, pf_mask 0x87, 2022-12-27, rev 0x2b000181 sig 0x000806f5, pf_mask 0x10, 2022-12-19, rev 0x2c000170 sig 0x000806f5, pf_mask 0x87, 2022-12-27, rev 0x2b000181 sig 0x000806f6, pf_mask 0x10, 2022-12-19, rev 0x2c000170 sig 0x000806f6, pf_mask 0x87, 2022-12-27, rev 0x2b000181 sig 0x000806f7, pf_mask 0x87, 2022-12-27, rev 0x2b000181 sig 0x000806f8, pf_mask 0x10, 2022-12-19, rev 0x2c000170 sig 0x000806f8, pf_mask 0x10, 2022-12-19, rev 0x2c000170, size 600064 sig 0x000806f8, pf_mask 0x87, 2022-12-27, rev 0x2b000181 sig 0x000806f8, pf_mask 0x87, 2022-12-27, rev 0x2b000181, size 561152 sig 0x000b06a2, pf_mask 0xc0, 2022-12-08, rev 0x410e sig 0x000b06a2, pf_mask 0xc0, 2022-12-08, rev 0x410e, size 212992 sig 0x000b06a3, pf_mask 0xc0, 2022-12-08, rev 0x410e * Updated Microcodes: sig 0x00050653, pf_mask 0x97, 2022-08-30, rev 0x1000161, size 36864 sig 0x00050656, pf_mask 0xbf, 2022-08-26, rev 0x4003303, size 37888 sig 0x00050657, pf_mask 0xbf, 2022-08-26, rev 0x5003303, size 37888 sig 0x0005065b, pf_mask 0xbf, 2022-08-26, rev 0x7002503, size 29696 sig 0x000606a6, pf_mask 0x87, 2022-10-09, rev 0xd000389, size 296960 sig 0x000606c1, pf_mask 0x10, 2022-09-23, rev 0x1000211, size 289792 sig 0x000706a1, pf_mask 0x01, 2022-09-16, rev 0x003e, size 75776 sig 0x000706a8, pf_mask 0x01, 2022-09-20, rev 0x0022, size 76800 sig 0x000706e5, pf_mask 0x80, 2022-08-31, rev 0x00b8, size 113664 sig 0x000806a1, pf_mask 0x10, 2022-09-07, rev 0x0032, size 34816 sig 0x00090672, pf_mask 0x07, 2023-01-04, rev 0x002c sig 0x00090672, pf_mask 0x07, 2023-01-04, rev 0x002c, size 219136 sig 0x00090675, pf_mask 0x07, 2023-01-04, rev 0x002c sig 0x000906a3, pf_mask 0x80, 2023-01-11, rev 0x0429 sig 0x000906a3, pf_mask 0x80, 2023-01-11, rev 0x0429, size 218112 sig 0x000906a4, pf_mask 0x80, 2023-01-11, rev 0x0429 sig 0x000906c0, pf_mask 0x01, 2022-09-02, rev 0x24000024, size 20480 sig 0x000a0671, pf_mask 0x02, 2022-08-31, rev 0x0057, size 103424 sig 0x000b0671, pf_mask 0x32, 2022-12-19, rev 0x0112, size 207872 sig 0x000b06f2, pf_mask 0x07, 2023-01-04, rev 0x002c sig 0x000b06f5, pf_mask 0x07, 2023-01-04, rev 0x002c -- Tobias Frost <tobi@debian.org> Sun, 12 Mar 2023 18:16:50 +0100 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: disable IGD (video DRM) supportPhilip Prindeville2023-05-211-1/+3
| | | | | | | | | | | | | IGD is only useful when accelerating a VM guest that wants to direct render to memory in the host's framebuffer, but since OpenWrt typically runs on headless hardware, this serves no purpose. Also build vfio with VFIO_NOIOMMU undefined (to get all of the code enabled), but allow it to be enabled via boot-time modparams settings (or at run-time via sysfs writes to "/sys/module/vfio/parameters/enable_unsafe_noiommu_mode". Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-12 10:31:58 +0000