aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* mt76: update to the latest versionFelix Fietkau2022-10-011-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | e4fa68a9b3b3 linux-firmware: update firmware for MT7921 WiFi device 60fcf08fe659 linux-firmware: update firmware for MT7921 WiFi device 9d601f4eee8f linux-firmware: update firmware for MT7922 WiFi device e49b6063fb4b wifi: mt76: move mt76_rate_power from core to mt76x02 driver code 3f27f6adb1ab wifi: mt76: mt76x02: simplify struct mt76x02_rate_power c07f3d2d5ede wifi: mt76: mt7921: fix antenna signal are way off in monitor mode 9059a5de3bd0 wifi: mt76: Remove unused inline function mt76_wcid_mask_test() d75f15ddeb90 wifi: mt76: mt7915: fix bounds checking for tx-free-done command 06df7e689294 wifi: mt76: mt7915: reserve 8 bits for the index of rf registers ad3d0f8db00b wifi: mt76: mt7915: rework eeprom tx paths and streams init 66065073177b wifi: mt76: mt7915: deal with special variant of mt7916 b0114a0abb57 wifi: mt76: mt7915: rework testmode tx antenna setting 6dee964e1f36 wifi: mt76: connac: introduce mt76_connac_spe_idx() 48c116d92939 wifi: mt76: mt7915: add spatial extension index support db6db4ded0fd wifi: mt76: mt7915: set correct antenna for radar detection on MT7915D 2b8f56a72d76 wifi: mt76: mt7915: fix mt7915_mac_set_timing() d554a02554db wifi: mt76: mt7915: move wed init routines in mmio.c 61ce40e65852 wifi: mt76: mt7915: enable wed for mt7986 chipset 584a96ec4a0f wifi: mt76: mt7915: enable wed for mt7986-wmac chipset 172d68b6253d mt76: mt76x02: fix vht rate power array overrun 72b87836d368 Revert "mt76: use IEEE80211_OFFLOAD_ENCAP_ENABLED instead of MT_DRV_AMSDU_OFFLOAD" Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ubnt-ledbar: make package available on other targetsDaniel Golle2022-09-301-2/+2
| | | | | | | | As also ramips/mt7621 now has a user of the ubnt-ledbar driver, make the package available on all targets by removing the dependency on @TARGET_mediatek_mt7622. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: remove hack patch, move kirkwood specific kmods to target modules.mkFelix Fietkau2022-09-302-32/+0
| | | | | | | Tweaking the KCONFIG line of kmod-ata-marvell-sata makes the hack patch unnecessary Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: move ubnt ledbar driver to a separate packageFelix Fietkau2022-09-303-0/+290
| | | | | | | Simplifies the tree by removing a non-upstream kernel patch and related kconfig symbols Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix decap offload for stations on AP_VLAN interfacesFelix Fietkau2022-09-301-0/+37
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wolfssl: fix TLSv1.3 RCE in uhttpd by using 5.5.1-stable (CVE-2022-39173)Petr Štetiar2022-09-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Fixes denial of service attack and buffer overflow against TLS 1.3 servers using session ticket resumption. When built with --enable-session-ticket and making use of TLS 1.3 server code in wolfSSL, there is the possibility of a malicious client to craft a malformed second ClientHello packet that causes the server to crash. This issue is limited to when using both --enable-session-ticket and TLS 1.3 on the server side. Users with TLS 1.3 servers, and having --enable-session-ticket, should update to the latest version of wolfSSL. Thanks to Max at Trail of Bits for the report and "LORIA, INRIA, France" for research on tlspuffin. Complete release notes https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable Fixes: CVE-2022-39173 Fixes: https://github.com/openwrt/luci/issues/5962 References: https://github.com/wolfSSL/wolfssl/issues/5629 Tested-by: Kien Truong <duckientruong@gmail.com> Reported-by: Kien Truong <duckientruong@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* Revert "wolfssl: fix TLSv1.3 RCE in uhttpd by using latest 5.5.1-stable release"Petr Štetiar2022-09-291-2/+2
| | | | | | | | This reverts commit a596a8396b1ef23cd0eda22d9a628392e70e1e1a as I've just discovered private email, that the issue has CVE-2022-39173 assigned so I'm going to reword the commit and push it again. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* wolfssl: refresh patchesPetr Štetiar2022-09-292-3/+3
| | | | | | So they're tidy and apply cleanly. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* wolfssl: fix TLSv1.3 RCE in uhttpd by using latest 5.5.1-stable releasePetr Štetiar2022-09-291-2/+2
| | | | | | | | | | | | | | | | | | | | | Fixes denial of service attack and buffer overflow against TLS 1.3 servers using session ticket resumption. When built with --enable-session-ticket and making use of TLS 1.3 server code in wolfSSL, there is the possibility of a malicious client to craft a malformed second ClientHello packet that causes the server to crash. This issue is limited to when using both --enable-session-ticket and TLS 1.3 on the server side. Users with TLS 1.3 servers, and having --enable-session-ticket, should update to the latest version of wolfSSL. Thanks to Max at Trail of Bits for the report and "LORIA, INRIA, France" for research on tlspuffin. Complete release notes https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable Fixes: https://github.com/openwrt/luci/issues/5962 References: https://github.com/wolfSSL/wolfssl/issues/5629 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* qos-scripts: fix trailing whitespace in config filesManas Sambhus2022-09-274-8/+7
| | | | Signed-off-by: Manas Sambhus <manas.sambhus+github@gmail.com>
* qos-scripts: replace modprobe by rmmodManas Sambhus2022-09-271-2/+1
| | | | | | modprobe -r is not available on all platforms, hence use rmmod Signed-off-by: Manas Sambhus <manas.sambhus+github@gmail.com>
* kernel: netsupport: replace insmod by modprobeManas Sambhus2022-09-271-1/+1
| | | | | | Replace insmod by modprobe in TEQL hotplug script Signed-off-by: Manas Sambhus <manas.sambhus+github@gmail.com>
* ppp: use modprobe in place of insmodManas Sambhus2022-09-272-15/+5
| | | | | | | This will prevent `module is already loaded` lines from appearing in the logs when a PPP connection is reconnecting Signed-off-by: Manas Sambhus <manas.sambhus+github@gmail.com>
* build: fix issues with targets installed via feedsFelix Fietkau2022-09-271-3/+4
| | | | | | | - fix including modules.mk when a target is being replaced - fix calling make targets from target/linux Signed-off-by: Felix Fietkau <nbd@nbd.name>
* nftables: backport fix to interval based rulesKevin Darbyshire-Bryant2022-09-262-1/+24
| | | | | | | | | 'rule inet dscpclassify dscp_match meta l4proto { udp } th dport { 3478 } th sport { 3478-3497, 16384-16387 } goto ct_set_ef' works with 'nft add', but not 'nft insert', the latter yields: "BUG: unhandled op 4". Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* sysfsutils: Define START early in fileKevin Darbyshire-Bryant2022-09-262-2/+3
| | | | | | | | | | The luci ucode rewrite exposed the definition of START as being over 1K from start of file. Initial versions limited the search for START & STOP to within the 1st 1K of a file. Whilst the search has been expanded, it doesn't do any harm to define START early in the file like all other init scripts seen so far. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* Revert "mt76: fix compilation error with mt7915 and kernel >= 5.15.61"Christian Marangi2022-09-251-38/+0
| | | | | | | | | | | This reverts commit 6e9613844ca1ddea7e36abc44a513c89ef0598ff. The patch was wrong in the first place as we base everything on backports package and the compilation error was caused by an ath11k present downstream. (will be needed later when backports package will be updated but not now) Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mt76: fix compilation error with mt7915 and kernel >= 5.15.61Christian Marangi2022-09-251-0/+38
| | | | | | | | With kernel 5.15.61 the define IEEE80211_MAX_AMPDU_BUF got changed to IEEE80211_MAX_AMPDU_BUF_HE. Add patch to fix compilation error on next 5.15 kernel versions. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* wolfssl: prefer regular libwolfssl over cpu-cryptoEneas U de Queiroz2022-09-253-16/+16
| | | | | | | | | | | | | | | | | Rename libwolfssl-cpu-crypto to libwolfsslcpu-crypto so that the regular libwolfssl version comes first when running: opkg install libwolfssl Normally, if the package name matches the opkg parameter, that package is preferred. However, for libraries, the ABI version string is appended to the package official name, and the short name won't match. Failing a name match, the candidate packages are sorted in alphabetical order, and a dash will come before any number. So in order to prefer the original library, the dash should be removed from the alternative library. Fixes: c3e7d86d2b (wolfssl: add libwolfssl-cpu-crypto package) Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* wolfssl: ABI version shouldn't depend on benchmarkEneas U de Queiroz2022-09-251-1/+1
| | | | | | | | | | | Move CONFIG_PACKAGE_libwolfssl-benchmark from the top of PKG_CONFIG_DEPENDS to after PKG_ABI_VERSION is set. This avoids changing the ABI version hash whether the bnechmark package package is selected or not. Fixes: 05df135cac (wolfssl: Rebuild when libwolfssl-benchmark gets changes) Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* ipq40xx: Add ZTE MF289FGiammarco Marzano2022-09-243-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's a 4G Cat.20 router used by Vodafone Italy (called Vodafone FWA) and Vodafone DE\T-Mobile PL (called GigaCube). Modem is a MiniPCIe-to-USB based on Snapdragon X24, it supports 4CA aggregation. There are currently two hardware revisions, which differ on the 5Ghz radio: AT1 = QCA9984 5Ghz Radio on PCI-E bus AT2 = IPQ4019 5Ghz Radio inside IPQ4019 like 2.4Ghz Device specification -------------------- SoC Type: Qualcomm IPQ4019 RAM: 256 MiB Flash: 128 MiB SPI NAND (Winbond W25N01GV) ROM: 2MiB SPI Flash (GD25Q16) Wireless 2.4 GHz (IP4019): b/g/n, 2x2 Wireless 5 GHz: (QCA9984): a/n/ac, 4x4 HW REV AT1 (IPA4019): a/n/ac, 2x2 HW REV AT2 Ethernet: 2xGbE (WAN/LAN1, LAN2) USB ports: No Button: 2 (Reset/WPS) LEDs: 3 external leds: Network (white or red), Wifi, Power and 1 internal (blue) Power: 12 VDC, 1 A Connector type: Barrel Bootloader: U-Boot Installation ------------ 1. Place OpenWrt initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial connector GND (which is right next to the thing with MF289F MIMO-V1.0), RX, TX (refer to this image: https://ibb.co/31Gngpr). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. Stop in u-Boot (using ESC button) and run u-Boot commands: setenv serverip 192.168.0.2 setenv ipaddr 192.168.0.1 set fdt_high 0x85000000 tftp openwrt-ipq40xx-generic-zte_mf289f-initramfs-fit-zImage.itb bootm $loadaddr 5. Please make backup of original partitions, if you think about revert to stock, specially mtd16 (Web UI) and mtd17 (rootFS). Use /tmp as temporary storage and do: WEB PARITION -------------------------------------- cat /dev/mtd16 > /tmp/mtd16.bin scp /tmp/mtd16.bin root@YOURSERVERIP:/ rm /tmp/mtd16.bin ROOT PARITION -------------------------------------- cat /dev/mtd17 > /tmp/mtd17.bin scp /tmp/mtd17.bin root@YOURSERVERIP:/ rm /tmp/mtd17.bin 6. Login via ssh or serial and remove stock partitions (default IP 192.168.0.1): # this can return an error, if ubi was attached before # or rootfs part was erased before. ubiattach -m 17 # it could return error if rootfs part was erased before ubirmvol /dev/ubi0 -N ubi_rootfs # some devices doesn't have it ubirmvol /dev/ubi0 -N ubi_rootfs_data 7. download and install image via sysupgrade -n (either use wget/scp to copy the mf289f's squashfs-sysupgrade.bin to the device's /tmp directory) sysupgrade -n /tmp/openwrt-...-zte_mf289f-squashfs-sysupgrade.bin Sometimes it could print ubi attach error, but please ignore it if process goes forward. Flash Layout NAND: mtd8: 000a0000 00020000 "fota-flag" mtd9: 00080000 00020000 "0:ART" mtd10: 00080000 00020000 "mac" mtd11: 000c0000 00020000 "reserved2" mtd12: 00400000 00020000 "cfg-param" mtd13: 00400000 00020000 "log" mtd14: 000a0000 00020000 "oops" mtd15: 00500000 00020000 "reserved3" mtd16: 00800000 00020000 "web" mtd17: 01d00000 00020000 "rootfs" mtd18: 01900000 00020000 "data" mtd19: 03200000 00020000 "fota" mtd20: 0041e000 0001f000 "kernel" mtd21: 0101b000 0001f000 "ubi_rootfs" SPI: mtd0: 00040000 00010000 "0:SBL1" mtd1: 00020000 00010000 "0:MIBIB" mtd2: 00060000 00010000 "0:QSEE" mtd3: 00010000 00010000 "0:CDT" mtd4: 00010000 00010000 "0:DDRPARAMS" mtd5: 00010000 00010000 "0:APPSBLENV" mtd6: 000c0000 00010000 "0:APPSBL" mtd7: 00050000 00010000 "0:reserved1" Back to Stock (!!! need original dump taken from initramfs !!!) ------------- 1. Place mtd16.bin and mtd17.bin initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial console connector (refer to the pin-out from above). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. rename mtd16.bin to web.img and mtd17.bin to root_uImage_s 5. Stop in u-Boot (using ESC button) and run u-Boot commands: This will erase RootFS+Web: nand erase 0x1000000 0x800000 nand erase 0x1800000 0x1D00000 This will restore RootFS: tftpboot 0x84000000 ${dir}root_uImage_s nand erase 0x1800000 0x1D00000 nand write $fileaddr 0x1800000 $filesize This will restore Web Interface: tftpboot 0x84000000 ${dir}web.img nand erase 0x1000000 0x800000 nand write $fileaddr 0x1000000 $filesize After first boot on stock firwmare, do a factory reset. Push reset button for 5 seconds so all parameters will be reverted to the one printed on label on bottom of the router Signed-off-by: Giammarco Marzano <stich86@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@gmail.com> (Warning: commit message did not conform to UTF-8 - hopefully fixed?, added description of the pin-out if image goes down, reformatted commit message to be hopefully somewhat readable on git-web, redid some of the gpio-buttons & leds DT nodes, etc.) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for Sony NCP-HG100/CellularINAGAKI Hiroshi2022-09-242-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sony NCP-HG100/Cellular is a IoT Gateway with 2.4/5 GHz band 11ac (WiFi-5) wireless function, based on IPQ4019. Specification: - SoC : Qualcomm IPQ4019 - RAM : DDR3 512 MiB (H5TC4G63EFR) - Flash : eMMC 4 GiB (THGBMNG5D1LBAIT) - WLAN : 2.4/5 GHz 2T2R (IPQ4019) - Ethernet : 10/100/1000 Mbps x2 - Transceiver : Qualcomm QCA8072 - WWAN : Telit LN940A9 - Z-Wave : Silicon Labs ZM5101 - Bluetooth : Qualcomm CSR8811 - Audio DAC : Realtek ALC5629 - Audio Amp. : Realtek ALC1304 - Voice Input Processor : Conexant CX20924 - Micro Controller Unit : Nuvoton MINI54FDE - RGB LED, Fan, Temp. sensors - Touch Sensor : Cypress CY8C4014LQI - RGB LED driver : TI LP55231 (2x) - LEDs/Keys : 11x, 6x - UART : through-hole on PCB - J1: 3.3V, TX, RX, GND from tri-angle marking - 115200n8 - Power : 12 VDC, 2.5 A Flash instruction using initramfs image: 1. Prepare TFTP server with the IP address 192.168.132.100 and place the initramfs image to TFTP directory with the name "C0A88401.img" 2. Boot NCP-HG100/Cellular and interrupt after the message "Hit any key to stop autoboot: 2" 3. Perform the following commands and set bootcmd to allow booting from eMMC setenv bootcmd "mmc read 0x84000000 0x2e22 0x4000 && bootm 0x84000000" saveenv 4. Perform the following command to load/boot the OpenWrt initramfs image tftpboot && bootm 5. On the initramfs image, perform sysupgrade with the sysupgrade image (if needed, backup eMMC partitions by dd command and download to other place before performing sysupgrade) 6. Wait for ~120 seconds to complete flashing Known issues: - There are no drivers for audio-related chips/functions in Linux Kernel and OpenWrt, they cannot be used. - There is no driver for MINI54FDE Micro-Controller Unit, customized for this device by the firmware in the MCU. This chip controls the following functions, but they cannot be controlled in OpenWrt. - RGB LED - Fan this fan is controlled automatically by MCU by default, without driver - Thermal Sensors (2x) - Currently, there is no driver or tool for CY8C4014LQI and cannot be controlled. It cannot be exited from "booting mode" and moved to "normal op mode" after booting. And also, the 4x buttons (mic mute, vol down, vol up, alexa trigger) connected to the IC cannot be controlled. - it can be exited from "booting mode" by installing and executing i2cset command: opkg update opkg install i2c-tools i2cset -y 1 0x14 0xf 1 - There is a connection issue on the control by uqmi for the WWAN module. But modemmanager can be used without any issues and the use of it is recommended. - With the F2FS format, too many errors are reported on erasing eMMC partition "rootfs_data" while booting: [ 1.360270] sdhci: Secure Digital Host Controller Interface driver [ 1.363636] sdhci: Copyright(c) Pierre Ossman [ 1.369730] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.374729] sdhci_msm 7824900.sdhci: Got CD GPIO ... [ 1.413552] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit [ 1.528325] mmc0: new HS200 MMC card at address 0001 [ 1.530627] mmcblk0: mmc0:0001 004GA0 3.69 GiB [ 1.533530] mmcblk0boot0: mmc0:0001 004GA0 partition 1 2.00 MiB [ 1.537831] mmcblk0boot1: mmc0:0001 004GA0 partition 2 2.00 MiB [ 1.542918] mmcblk0rpmb: mmc0:0001 004GA0 partition 3 512 KiB, chardev (247:0) [ 1.550323] Alternate GPT is invalid, using primary GPT. [ 1.561669] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 ... [ 8.841400] mount_root: loading kmods from internal overlay [ 8.860241] kmodloader: loading kernel modules from //etc/modules-boot.d/* [ 8.863746] kmodloader: done loading kernel modules from //etc/modules-boot.d/* [ 9.240465] block: attempting to load /etc/config/fstab [ 9.246722] block: unable to load configuration (fstab: Entry not found) [ 9.246863] block: no usable configuration [ 9.254883] mount_root: overlay filesystem in /dev/mmcblk0p17 has not been formatted yet [ 9.438915] urandom_read: 5 callbacks suppressed [ 9.438924] random: mkfs.f2fs: uninitialized urandom read (16 bytes read) [ 12.243332] mmc_erase: erase error -110, status 0x800 [ 12.246638] mmc0: cache flush error -110 [ 15.134585] mmc_erase: erase error -110, status 0x800 [ 15.135891] mmc_erase: group start error -110, status 0x0 [ 15.139850] mmc_erase: group start error -110, status 0x0 ...(too many the same errors)... [ 17.350811] mmc_erase: group start error -110, status 0x0 [ 17.356197] mmc_erase: group start error -110, status 0x0 [ 17.439498] sdhci_msm 7824900.sdhci: Card stuck in wrong state! card_busy_detect status: 0xe00 [ 17.446910] mmc0: tuning execution failed: -5 [ 17.447111] mmc0: cache flush error -110 [ 18.012440] F2FS-fs (mmcblk0p17): Found nat_bits in checkpoint [ 18.062652] F2FS-fs (mmcblk0p17): Mounted with checkpoint version = 428fa16b [ 18.198691] block: attempting to load /etc/config/fstab [ 18.198972] block: unable to load configuration (fstab: Entry not found) [ 18.203029] block: no usable configuration [ 18.211371] mount_root: overlay filesystem has not been fully initialized yet [ 18.214487] mount_root: switching to f2fs overlay So, this support uses ext4 format instead which has no errors. Note: - The primary uart is shared for debug console and Z-Wave chip. The function is switched by GPIO15 (Linux: 427). value: 1: debug console 0: Z-Wave - NCP-HG100/Cellular has 2x os-image pairs in eMMC. - 0:HLOS, rootfs - 0:HLOS_1, rootfs_1 In OpenWrt, the first image pair is used. - "bootipq" command in U-Boot requires authentication with signed-image by default. To boot unsigned image of OpenWrt, use "mmc read" and "bootm" command instead. - This support is for "Cellular" variant of NCP-HG100 and not tested on "WLAN" (non-cellular) variant. - The board files of ipq-wifi may also be used in "WLAN" variant of NCP-HG100, but unconfirmed and add files as for "Cellular" variant. - "NET" LED is used to indicate WWAN status in stock firmware. - There is no MAC address information in the label on the case, use the address included in UUID in the label as "label-MAC" instead. - The "CLOUD" LEDs are partially used for indication of system status in stock firmware, use they as status LEDs in OpenWrt instead of RGB LED connected to the MCU. MAC addresses: LAN : 5C:FF:35:**:**:ED (ART, 0x6 (hex)) WAN : 5C:FF:35:**:**:EF (ART, 0x0 (hex)) 2.4 GHz: 5C:FF:35:**:**:ED (ART, 0x1006 (hex)) 5 GHz : 5C:FF:35:**:**:EE (ART, 0x5006 (hex)) partition layout in eMMC (by fdisk, GPT): Disk /dev/mmcblk0: 7733248 sectors, 3776M Logical sector size: 512 Disk identifier (GUID): **** Partition table holds up to 20 entries First usable sector is 34, last usable sector is 7634910 Number Start (sector) End (sector) Size Name 1 34 1057 512K 0:SBL1 2 1058 2081 512K 0:BOOTCONFIG 3 2082 3105 512K 0:QSEE 4 3106 4129 512K 0:QSEE_1 5 4130 4641 256K 0:CDT 6 4642 5153 256K 0:CDT_1 7 5154 6177 512K 0:BOOTCONFIG1 8 6178 6689 256K 0:APPSBLENV 9 6690 8737 1024K 0:APPSBL 10 8738 10785 1024K 0:APPSBL_1 11 10786 11297 256K 0:ART 12 11298 11809 256K 0:HSEE 13 11810 28193 8192K 0:HLOS 14 28194 44577 8192K 0:HLOS_1 15 44578 306721 128M rootfs 16 306722 568865 128M rootfs_1 17 568866 3958065 1654M rootfs_data [initial work] Signed-off-by: Iwao Yuki <dev.clef@gmail.com> Co-developed-by: Iwao Yuki <dev.clef@gmail.com> [adjustments, cleanups, commit message, sending patch] Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> (dropped clk_unused_ignore, dropped 901-* patches, renamed key nodes, changed LEDs chan/labels to match func-en, made :net -> (w)wan leds) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* firmware: intel-microcode: update to 20220809Christian Lamparter2022-09-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Debian's changelog by Henrique de Moraes Holschuh <hmh@debian.org>: * New upstream microcode datafile 20220809 * Fixes INTEL-SA-00657, CVE-2022-21233 Stale data from APIC leaks SGX memory (AEPIC leak) * Fixes unspecified errata (functional issues) on Xeon Scalable * Updated Microcodes: sig 0x00050653, pf_mask 0x97, 2022-03-14, rev 0x100015e, size 34816 sig 0x00050654, pf_mask 0xb7, 2022-03-08, rev 0x2006e05, size 44032 sig 0x000606a6, pf_mask 0x87, 2022-04-07, rev 0xd000375, size 293888 sig 0x000706a1, pf_mask 0x01, 2022-03-23, rev 0x003c, size 75776 sig 0x000706a8, pf_mask 0x01, 2022-03-23, rev 0x0020, size 75776 sig 0x000706e5, pf_mask 0x80, 2022-03-17, rev 0x00b2, size 112640 sig 0x000806c2, pf_mask 0xc2, 2022-03-19, rev 0x0028, size 97280 sig 0x000806d1, pf_mask 0xc2, 2022-03-28, rev 0x0040, size 102400 sig 0x00090672, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064 sig 0x00090675, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064 sig 0x000906a3, pf_mask 0x80, 2022-06-15, rev 0x0421, size 216064 sig 0x000906a4, pf_mask 0x80, 2022-06-15, rev 0x0421, size 216064 sig 0x000a0671, pf_mask 0x02, 2022-03-17, rev 0x0054, size 103424 sig 0x000b06f2, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064 sig 0x000b06f5, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: fix parameter reading for AC_BE tx burstingAlberto Martinez-Alvarez2022-09-241-2/+2
| | | | | | | | | | | | | | | The "tx_burst" option which should control the value was expecting more of a list and hence tx_queue_data2_burst value wasn't updated. Yes, it would make sense to have a list for this, the existing code only updates tx_queue_data2_burst and not the other tx_queue_data[0134]_burst values. Signed-off-by: Alberto Martinez-Alvarez <amteza@gmail.com> (formatted commit message, wrote extra information into commit, moved tx_burst to existing json_get_vars) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: remove broken CFG80211_WEXT select from the r8723bs driverFelix Fietkau2022-09-231-0/+10
| | | | | | Fixes a build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: mark lib80211 as hiddenFelix Fietkau2022-09-231-0/+1
| | | | | | | Prevents build errors by ensuring that it is only selected when a wext based driver that needs it is also selected Signed-off-by: Felix Fietkau <nbd@nbd.name>
* prism54-firmware: set DL_DIR to package specific subdirectoryMichael Pratt2022-09-221-0/+2
| | | | | | | | | | | | | | This package downloads raw files which have names that are not corresponding to the name and version of the package as it is defined in the Makefile. Use the option DL_SUBDIR to set the DL_DIR to be a subdirectory named with PKG_NAME and PKG_RELEASE to better organize the downloads. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* b43legacy-firmware: set DL_DIR to package specific subdirectoryMichael Pratt2022-09-221-0/+2
| | | | | | | | | | | | | | This package downloads raw files which have names that are not corresponding to the name and version of the package as it is defined in the Makefile. Use the option DL_SUBDIR to set the DL_DIR to be a subdirectory named with PKG_NAME and PKG_VERSION to better organize the downloads. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath10k-ct-firmware: set DL_DIR to package specific subdirectoryMichael Pratt2022-09-221-0/+2
| | | | | | | | | | | | | | This package downloads raw files which have names that are not corresponding to the name and version of the package as it is defined in the Makefile. Use the option DL_SUBDIR to set the DL_DIR to be a subdirectory named with PKG_NAME and PKG_VERSION to better organize the downloads. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* acx-mac80211: set DL_DIR to package specific subdirectoryMichael Pratt2022-09-221-0/+2
| | | | | | | | | | | | | | | | | This package downloads raw files which have names that are not corresponding to the name and version of the package as it is defined in the Makefile. Use the option DL_SUBDIR to set the DL_DIR to be a subdirectory named with PKG_NAME and PKG_SOURCE_DATE to better organize the downloads. Define PKG_VERSION here using PKG_SOURCE_DATE. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* base-files: Actually set default nameOlliver Schinagl2022-09-221-1/+1
| | | | | | | | | | | The currently used shell expansion doesn't seem to exist [0] and also does not work. This surely was not intended, so lets allow default naming to actually work. [0]: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html Fixes: be09c5a3cd65 ("base-files: add board.d support for bridge device") Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* iwinfo: update to the latest versionFelix Fietkau2022-09-221-3/+3
| | | | | | | | | | 46f04f3808e8 devices: add MediaTek MT7986 WiSoC b3e08c8b5a8f ops: make support for wireless extensions optional 1f695d9c7f82 nl80211: allow phy names that don't start with 'phy' b7f9f06e1594 nl80211: fix phy/netdev index lookup 4a43b0d40ba5 nl80211: look up the phy name instead of assuming name == phy<idx> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add ubus notification on sta authorizedFelix Fietkau2022-09-223-2/+79
| | | | | | | Also include the station auth_type in the ubus and log message in order to detect, if clients used FT or FILS to associate Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: disable drivers that rely on wireless extensionsFelix Fietkau2022-09-223-0/+5
| | | | | | They are unmaintained and don't work properly with current wifi scripts Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: disable wireless extensions only when neededFelix Fietkau2022-09-223-2/+2
| | | | | | They are only needed by a few very old drivers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add VFIO kernel packagesNicola Corna2022-09-211-0/+43
| | | | | | Add kmod-vfio and kmod-vfio-pci packages. Signed-off-by: Nicola Corna <nicola@corna.info>
* arm-trusted-firmware-mvebu: stop cluttering Image BuilderTomasz Maciej Nowak2022-09-211-21/+20
| | | | | | | | | | | | | | All contents of staging_dir/image are included in Image Builder (IB) in case some binary needs to be included in final image. But in case of this package, all sources are stored there and those clutter the final tarball of IB for no reason. Those sources are not used during image creation and are just dead weight. To put it in perspective, the IB for 21.02.0 is 158 MiB, 22.03.0-rc6 is 366 MiB and snapshot is over 620 MiB! To fix it, put them in package build directory, so they won't end up included in IB tarball. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> Reviewed-by: Andre Heider <a.heider@gmail.com>
* xdp-tools: update to version 1.2.8Daniel Golle2022-09-201-2/+2
| | | | | | | | | | | | | 82628d8 libxdp: Fix resource leaks 7fb0af0 libxdp: always clone program fd before taking ownership of it d8cd007 headers: Update kernel btf.h header file 2265125 (tag: v1.2.7) xdp-filter: Update examples in documentation 2b65008 libxdp: Fix libxdp compilation error 2387514 xsk: remove unused variable outstanding_tx 00b5a95 Fix section names in xsk programs d4ff1f9 (tag: v1.2.8) Bump TOOLS_VERSION to 1.2.8 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: update to 2022-07-29David Bauer2022-09-2042-266/+242
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | b704dc72e tests: sigma_dut and updated ConfResult value for Configurator failures 89de431f2 DPP: Add config response status value to DPP-CONF-SENT 10104915a tests: sigma_dut and DPP PB session overlap 80d5e264c Enhance QCA vendor roam event to indicate MLO links after reassociation 662249306 Update copyright notices for the QCA vendor definitions 8adcdd659 tests: Temporary workaround for dpp_chirp_ap_5g ddcd15c2d tests: Fix fuzzing/sae build 7fa67861a tests: Fix p2p_channel_avoid3 ee3567d65 tests: Add more time for scan/connection 1d08b238c nl80211: Allow more time for the initial scan with 6 GHz ac9e6a2ab tests: Allow 6 GHz opclasses in MBO checks faf9c04cb Remove a host of unnecessary OPENSSL_IS_BORINGSSL ifdefs b9cd5a82f Always process pending QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH data ef4cd8e33 QoS: Use common classifier_mask for ipv4/ipv6 93be02592 Add fixed FDD mode to qca_btc_chain_mode QCA vendor attribute e7cbfa1c1 tests: sigma_dut and DPP Enrollee unsupported curves 5565fbee2 DPP: Check Enrollee supported curves when building Config Response ceae05cec tests: sigma_dut and DPP MUDURL setting for hostapd 4cfb484e9 DPP: Allow dpp_controller_start without arguments in CLIs c97000933 Fix ifdef condition for imsi_privacy_cert 2a9a61d6c tests: SAE with extended key AKM e35f6ed1d tests: More detailed report on SAE PMKSA caching error case f70db167a SAE: Derive a variable length PMK with the new AKM suites 91010e6f6 SAE: Indicate AKM suite selector in commit for new AKM suites e81ec0962 SAE: Use H2E unconditionally with the new AKM suites f8eed2e8b SAE: Store PMK length and AKM in SAE data 9dc4e9d13 SAE: EAPOL-Key and key/MIC length information for the new AKM suites a32ef3cfb SAE: Driver capability flags for the new SAE AKM suites 91df8c9c6 SAE: Internal WPA_KEY_MGMT_* defines for extended key AKMs 5c8a714b1 SAE: Use wpa_key_mgmt_sae() helper 5456b0f26 Define new RSN AKM suite selector values def33101c DPP: Clear push button announcement state on wpa_supplicant FLUSH 35587fa8f tests: DPP Controller/Relay with need to discover Controller d22dfe918 DPP: Event message for indicating when Relay would need a Controller ca7892e98 tests: DPP Relay and adding/removing connection to a Controller bfe3cfc38 DPP: Allow Relay connections to Controllers to be added and removed 808834b18 Add a comparison function for hostapd_ip_addr f7763880b DPP: Advertise Configurator connectivity on Relay automatically ff7cc1d49 tests: DPP Relay and dynamic Controller addition ca682f80a DPP: Dynamic Controller initiated connection on Relay d2388bcca DPP: Strict validation of PKEX peer bootstrapping key during auth a7b8cef8b DPP3: Fix push button boostrapping key passing through PKEX 69d7c8e6b DPP: Add peer=id entry for PKEX-over-TCP case b607d2723 tests: sigma_dut and DPP PB Configurator in wpa_supplicant 1ff9251a8 DPP3: Push button Configurator in wpa_supplicant b94e46bc7 tests: PB Configurator in wpa_supplicant ca4e82cbf tests: sigma_dut DPP/PKEX initiator as Configurator over TCP and Wi-Fi e9137950f DPP: Recognize own PKEX Exchange Request if it ends up being received 692956446 DPP: Note PKEX code/identifier deletion in debug log dfa9183b1 tests: DPP reconfig after Controller-initiated operation through Relay ae4a3a6f6 DPP: Add DPP-CONF-REQ-RX event for Controller 17216b524 tests: sigma_dut DPP/PKEX initiator as Configurator (TCP) through Relay fb2937b85 DPP: Allow Controller to initiate PKEX through Relay 15af83cf1 DPP: Delete PKEX code and identifier on success completion of PKEX d86ed5b72 tests: Allow DPP_PKEX_REMOVE success in dpp_pkex_hostapd_errors 0a4f391b1 tests: sigma_dut and DPP Connector Privacy 479e412a6 DPP3: Default value for dpp_connector_privacy 7d12871ba test: DPP Private Peer Introduction protocol 148de3e0d DPP3: Private Peer Introduction protocol 786ea402b HPKE base mode with single-shot API f0273bc81 OpenSSL: Remove a forgotten debug print f2bb0839f test: DPP 3rd party config information 68209ddbe DPP: Allow 3rd party information to be added into config object 0e2217c95 DPP: Allow 3rd party information to be added into config request obj 3d82fbe05 Add QCA vendor subcommand and attributes for SCS rule configuration 16b62ddfa QCA vendor attribute for DBAM configuration 004b1ff47 tests: DPP Controller initiating through Relay 451ede2c3 DPP: Allow AP/Relay to be configured to listed for new TCP connections 248654d36 tests: sigma_dut DPP PB test cases 697b7d7ec tests: DPP push button 7bbe85987 DPP3: Allow external configuration to be specified on AP for PB 8db786a43 DPP3: Testing functionality for push button announcements 37bccfcab DPP3: Push button bootstrap mechanism a0054fe7c Add AP and STA specific P802.11az security capabilities (vendor command) 159e63613 QCA vendor command for CoAP offload processing 3b7bb17f6 Add QCA vendor attribute for TIM beacon statistics 09a281e52 Add QCA vendor interface for PASN offload to userspace 809fb96fa Add a vendor attribute to configure concurrency policy for AP interface a5754f531 Rename QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_MULTI_STA_POLICY 085a3fc76 EHT: Add 320 channel width support bafe35df0 Move CHANWIDTH_* definitions from ieee80211_defs.h to defs.h 92f549901 tests: Remove the 80+80 vs. 160 part from wpa2_ocv_ap_vht160_mismatch c580c2aec tests: Make OCV negative test error cases more robust 3c2ba98ad Add QCA vendor event to indicate driver recovery after internal failures 6b461f68c Set current_ssid before changing state to ASSOCIATING 8dd826741 QCA vendor attribute to configure direct data path for audio traffic 504be2f9d QCA vendor command support to get WLAN radio combinations d5905dbc8 OCV: Check the Frequency Segment 1 Channel Number only on 80+80 MHz Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: rt2x00: replace patches with v3 of pending seriesDaniel Golle2022-09-1827-544/+938
| | | | | | | See also patchwork for submission progress: https://patchwork.kernel.org/project/linux-wireless/cover/cover.1663445157.git.daniel@makrotopia.org/ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: fix including modules.mk for targets pulled in from feedsFelix Fietkau2022-09-181-1/+2
| | | | | Fixes: ebc36ebb2349 ("scripts/feeds: install targets to target/linux/feeds and support overriding") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: don't select indoor channel on outdoor operationDavid Bauer2022-09-181-0/+58
| | | | | | | Don't select channels designated for exclusive-indoor use when the country3 element is set on outdoor operation. Signed-off-by: David Bauer <mail@david-bauer.net>
* wireless-regdb: update to 2022-08-12Nick Hainke2022-09-171-2/+2
| | | | | | | | | Changes: 9dc9c89 wireless-regdb: update regulatory database based on preceding changes 442bc25 wireless-regdb: update 5 GHz rules for PK and add 60 GHz rule daee7f3 wireless-regdb: add 5 GHz rules for GY Signed-off-by: Nick Hainke <vincent@systemli.org>
* linux-firmware: update to 20220913Nick Hainke2022-09-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | Changes: f09bebf amdgpu: update yellow carp DMCUB firmware db6db36 amdgpu: add firmware for VCN 3.1.2 IP block 3647da5 amdgpu: add firmware for SDMA 5.2.6 IP block 639b5c1 amdgpu: add firmware for PSP 13.0.5 IP block 7658946 amdgpu: add firmware for GC 10.3.6 IP block 427ca6c amdgpu: add firmware for DCN 3.1.5 IP block edf9a2b qcom: rename Lenovo ThinkPad X13s firmware paths 9ebd5a5 rtw89: 8852c: update fw to v0.27.42.0 7546432 rtw89: 8852c: update fw to v0.27.36.0 2f2f018 Mellanox: Add new mlxsw_spectrum firmware xx.2010.3146 706a462 amdgpu: update beige goby VCN firmware 09ec438 amdgpu: update dimgrey cavefish VCN firmware 647021b amdgpu: update navy flounder VCN firmware 3c1662d amdgpu: update sienna cichlid VCN firmware d3c9228 rtl_bt: Update RTL8852C BT USB firmware to 0xDFB8_5A33 a1c4b15 mediatek: reference the LICENCE file for MediaTek firmwares Signed-off-by: Nick Hainke <vincent@systemli.org>
* linux-firmware: update to 20220815Nick Hainke2022-09-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: 12ca075 mediatek: Add new mt8186 SOF firmware aed71f2 ice: Update package to 1.3.30.0 1ee415b QCA: Update Bluetooth WCN685x 2.1 firmware to 2.1.0-00438 c58f001 brcm: Add nvram for Lenovo Yoga Tablet 2 830F/L and 1050F/L tablets d4a4224 brcm: Add nvram for the Xiaomi Mi Pad 2 tablet 7220731 brcm: Add nvram for the Asus TF103C tablet 89ec619 Add amd-ucode README file 4f8f67e qca: Update firmware files for BT chip WCN6750. This commit will update required firmware files for WCN6750. e6857b6 amdgpu: Update Yellow Carp VCN firmware e6185d5 linux-firmware: Update firmware file for Intel Bluetooth 9462 140beaf linux-firmware: Update firmware file for Intel Bluetooth 9462 045847e linux-firmware: Update firmware file for Intel Bluetooth 9560 f7f3d1f linux-firmware: Update firmware file for Intel Bluetooth 9560 45c5e53 linux-firmware: Update firmware file for Intel Bluetooth AX201 1068c45 linux-firmware: Update firmware file for Intel Bluetooth AX201 b93bf2c linux-firmware: Update firmware file for Intel Bluetooth AX211 31d24ca linux-firmware: Update firmware file for Intel Bluetooth AX211 447ca4a linux-firmware: Update firmware file for Intel Bluetooth AX210 87d07fd linux-firmware: Update firmware file for Intel Bluetooth AX200 63a87d2 linux-firmware: Update firmware file for Intel Bluetooth AX201 a45053c Mellanox: Add new mlxsw_spectrum firmware xx.2010.3020 4ae4ae8 qcom: Add firmware for Lenovo ThinkPad X13s feda199 linux-firmware: Add firmware for Cirrus CS35L41 a4235e0 i915: Add GuC v70.4.1 for DG2 3ab394a i915: Add DMC v2.07 for DG2 150864a amdgpu partially revert "amdgpu: update beige goby to release 22.20" 56cf646 mediatek: Update mt8183/mt8192/mt8195 SCP firmware 4421586 amdgpu: update renoir to release 22.20 06cead1 amdgpu: update beige goby to release 22.20 d3e37b7 amdgpu: update yellow carp to release 22.20 9149732 amdgpu: update dimgrey cavefish to release 22.20 c2f5699 amdgpu: update vega20 to release 22.20 c3afe6a amdgpu: update vega12 to release 22.20 e840fe5 amdgpu: update raven to release 22.20 efe98d4 amdgpu: update navy flounder to release 22.20 5f13921 amdgpu: update vega10 to release 22.20 8da4640 amdgpu: update sienna cichlid to release 22.20 3fbfd89 amdgpu: update navi14 to release 22.20 8fe4b42 amdgpu: update green sardine to release 22.20 ca36bb9 amdgpu: update vangogh to release 22.20 21ba56c amdgpu: update navi12 to release 22.20 e9918d2 amdgpu: update navi10 to release 22.20 f379030 amdgpu: update picasso to release 22.20 1826c07 amdgpu: update aldebaran to release 22.20 1cbf1c6 amdgpu: update psp 13.0.8 TA firmware 35bb3bd WHENCE: Fix the dangling symlinks fix 84661a3 amdgpu: update DMCUB firmware for DCN 3.1.6 dfa2931 WHENCE: Correct dangling symlinks Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: rt2x00: fix typoSungbo Eo2022-09-182-5/+3
| | | | | | Add missing semicolon and refresh patches. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ltq-[a|v]dsl-app: provide ltq-dsl-appAndre Heider2022-09-172-0/+2
| | | | | | | This makes it easier for packages to depend on any lantiq/intel/maxlinear compatible dsl daemon. Signed-off-by: Andre Heider <a.heider@gmail.com>
* ltq-vdsl-app: rename to ltq-vdsl-vr9-appAndre Heider2022-09-1714-11/+11
| | | | | | | This matches the scheme used by other target packages and will avoid confusion with any future version. Signed-off-by: Andre Heider <a.heider@gmail.com>
* lantiq: rename ltq-vdsl folder to ltq-vdsl-vr9Andre Heider2022-09-177-1/+1
| | | | | | | Now PKG_NAME matches the folder name, and this will avoid confusion with any future version. Signed-off-by: Andre Heider <a.heider@gmail.com>
* lantiq: rename ltq-vdsl-mei folder to ltq-vdsl-vr9-meiAndre Heider2022-09-179-4/+4
| | | | | | | Now PKG_NAME matches the folder name, and this will avoid confusion with any future version. Signed-off-by: Andre Heider <a.heider@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 23:56:04 +0000