aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* urandom-seed: use seedrng for seeding the random number generatorJason A. Donenfeld2022-03-285-35/+442
| | | | | | | | | | | | | | | | | | | The RNG can't actually be seeded from a shell script, due to the reliance on ioctls. For this reason, the seedrng project provides a basic script meant to be copy and pasted into projects like OpenWRT and tweaked as needed: <https://git.zx2c4.com/seedrng/about/>. This commit imports it into the urandom-seed package and wires up the init scripts to call it. This also is a significant improvement over the current init script, which does not robustly handle cleaning up of seeds and syncing to prevent reuse. Additionally, the existing script creates a new seed immediately after writing an old one, which means that the amount of entropy might actually regress, due to failing to credit the old seed. Closes: https://github.com/openwrt/openwrt/issues/9570 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> [fixed missing INSTALL_DIR]
* libs/zlib: fix implicit function declaration warningPetr Štetiar2022-03-281-3/+3
| | | | | | | | | Fixes following warning: adler32.c:141:12: warning: implicit declaration of function 'NEON_adler32' [-Wimplicit-function-declaration] 141 | return NEON_adler32(adler, buf, len); Signed-off-by: Petr Štetiar <ynezz@true.cz>
* libs/zlib: bump to latest stable release 1.2.12 (CVE-2018-25032)Petr Štetiar2022-03-283-362/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | List of changes since previous release from 2018 is quite long: * Fix crc32.c to compile local functions only if used. * Check for cc masquerading as gcc or clang in configure. * Remove destructive aspects of make distclean. * Separate out address sanitizing from warnings in configure. * Eliminate use of ULL constants. * Add fallthrough comments for gcc. * Clean up minizip to reduce warnings for testing. * Fix unztell64() in minizip to work past 4GB. (Daniël Hörchner) * minizip warning fix if MAXU32 already defined. (gvollant) * Replace black/white with allow/block. (theresa-m) * Fix indentation in minizip's zip.c. * Improve portability of contrib/minizip. * Correct typo in blast.c. * Change macro name in inflate.c to avoid collision in VxWorks. * Clarify gz* function interfaces, referring to parameter names. * Fix error in comment on the polynomial representation of a byte. * Fix memory leak on error in gzlog.c. * Avoid adding empty gzip member after gzflush with Z_FINISH. * Explicitly note that the 32-bit check values are 32 bits. * Use ARM crc32 instructions if the ARM architecture has them. * Add use of the ARMv8 crc32 instructions when requested. * Correct comment in crc32.c. * Don't bother computing check value after successful inflateSync(). * Use atomic test and set, if available, for dynamic CRC tables. * Speed up software CRC-32 computation by a factor of 1.5 to 3. * Add crc32_combine_gen() and crc32_combine_op() for fast combines. * Add tables for crc32_combine(), to speed it up by a factor of 200. * Fix the zran.c example to work on a multiple-member gzip file. * Add gznorm.c example, which normalizes gzip files. * Show all the codes for the maximum tables size in enough.c. * Clarify that prefix codes are counted in enough.c. * Use inline function instead of macro for index in enough.c. * Clean up code style in enough.c, update version. * Use a macro for the printf format of big_t in enough.c. * Use a structure to make globals in enough.c evident. * Assure that the number of bits for deflatePrime() is valid. * Fix a bug that can crash deflate on some input when using Z_FIXED. * Correct the initialization requirements for deflateInit2(). * Emphasize the need to continue decompressing gzip members. * Add legal disclaimer to README. * Fix deflateEnd() to not report an error at start of raw deflate. * Remove old assembler code in which bugs have manifested. * Make the names in functions declarations identical to definitions. * Avoid an undefined behavior of memcpy() in _tr_stored_block(). * Avoid undefined behaviors of memcpy() in gz*printf(). * Avoid an undefined behavior of memcpy() in gzappend(). * Avoid the use of ptrdiff_t. * Handle case where inflateSync used when header never processed. * Don't compute check value for raw inflate if asked to validate. * Add address checking in clang to -w option of configure. * Return an error if the gzputs string length can't fit in an int. * Small speedup to inflate [psumbera]. * Update use of errno for newer Windows CE versions. * Avoid some conversion warnings in gzread.c and gzwrite.c. * Have Makefile return non-zero error code on test failure. * Avoid a conversion error in gzseek when off_t type too small. * Fix CLEAR_HASH macro to be usable as a single statement. * Fix bug when window full in deflate_stored(). * Limit hash table inserts after switch from stored deflate. * Permit a deflateParams() parameter change as soon as possible. * Cygwin does not have _wopen(), so do not create gzopen_w() there. Removed 006-fix-compressor-crash-on-certain-inputs.patch which was hotfix for CVE-2018-25032 and is now included in this release. This release is not available on @SF (yet?) so the sources are now pulled from GitHub. Fixes: CVE-2018-25032 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: 5.15: add missing Kconfig symbols for NFSDaniel Golle2022-03-271-2/+9
| | | | | | | Add new Kconfig symbols for NFSv4.1 and NFSv4.2 to kmod-nfs-common and kmod-nfsd. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* gpio-cdev: move kmod-leds-uleds dependency to MX100Christian Lamparter2022-03-271-1/+1
| | | | | | | | | | | | | The inclusion of the kmod-leds-uleds into the userspace nu801 package causes a circular dependency inside the buildsystem... which causes it to be picked regardless of other DEPENDS values. In case of the mx100, this could be solved by moving the kmod-leds-uled dependency to the kmod-meraki-mx100. Bonus: drop @!LINUX_5_4 from kmod-meraki-mx100 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* gpio-cdev: provide HASH values for nu801Christian Lamparter2022-03-271-1/+1
| | | | | | | | | | | | | | | | | | Chen Minqiang reported that he has troubles downloading nu801. His logs showed the followin TLS Handshake failure. |Checking out files from the git repository... |Cloning into 'nu801-d9942c0c'... |fatal: unable to access 'https://github.com/chunkeey/nu801.git/': | gnutls_handshake() failed: The TLS connection was non-properly terminated. |Makefile:39: recipe for target '[...]/dl/nu801-d9942c0c.tar.xz' failed This can be fixed by providing a PKG_MIRROR_HASH. The download scripts will now be able to pull the source from OpenWrt's source archive, which should be available through HTTP. Reported-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* elfutils: fix host compilation with Alpine LinuxRosen Penev2022-03-271-0/+4
| | | | | | | | | | | | | intl is not included in libc, disable it as is done with the target package. argp is also not included. Add build depends for argp-standalone. fts is also not included. Add build depends for musl-fts. Disable shared libraries to avoid having to manually add rpath. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* pcre: disable shared libraries for host buildsRosen Penev2022-03-271-0/+1
| | | | | | | | Getting rid of shared libraries for hostpkg avoids having to use rpath hacks to find the library. It also fixes compilation with host glib2 binaries. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* musl-fts: remove shared libraries from hostRosen Penev2022-03-271-0/+1
| | | | | | | | Avoids having to add rpath to the various packages using it. Also add PIC to fix compilation as static libraries do not use PIC by default. Fixes: 1fb099341e58 ("musl-fts: add host build") Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: 5.15: add new moduleAnsuel Smith2022-03-278-20/+108
| | | | | | | | | | | | | Add new module require in 5.15 - Changes in block module - Changes in netfilter module (log module unified) - Changes in fs module (mainly new depends for cifs and new ntfs3 module) - Changes in lib add shared lib now used by more than 1 kmod - Changes in crypto, dropped one crypto algo added arm crypto accellerator - Changes in other, add zram default compressor choice and missing lib by tpm module Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* mac80211: backport patch that allows receiving packets with non-standard VHT ↵Felix Fietkau2022-03-251-0/+36
| | | | | | MCS10-11 rates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq40xx: update E2600AC c1/c2 board张 鹏2022-03-253-2/+4
| | | | | | | | Modified the radio frequency hardware part of e2600ac c1/c2, need to cooperate with the modified board.bin file, the device can work normally. Signed-off-by: 张 鹏 <sd20@qxwlan.com>
* cypress-firmware: drop several packagesJosef Schlehofer2022-03-251-54/+0
| | | | | | | | | | | | | | | | | | | | | | | 1. Drop package: cypress-firmware-4359-pcie This binary is no longer provided and there are not many details what happened. 2. Drop package: cypress-firmware-4359-sdio This binary is no longer provided, but in this case, to compare it with PCIe package mention as first, there was added support in Linux-firmware [1], but no sign of firmware file. 4. Drop package: cypress-firmware-89459-pcie [2] According to Infineon: "CYW89459 is an automotive Wi-Fi chip which is not supported in the broad market community." [1] https://patchwork.kernel.org/project/linux-wireless/patch/20191211235253.2539-6-smoch@web.de/ [2] https://community.infineon.com/t5/Wi-Fi-Bluetooth-for-Linux/the-wifi-driver-for-CYW89459-in-linux4-14-98-2-3-00/m-p/138971 Fixes: 7ca7e0b22de6 ("cypress-firmware: update it to version 5.4.18-2021_0812") Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* gpio-cdev: re-add nu801 userspace driverChris Blake2022-03-252-0/+53
| | | | | | | | | | | | | | | | | | | | | This reverts commit 80b7a8a7f5a0a88fde6dd19f097df4d7cac9ff04. Now that 5.10 is the default kernel for all platforms, we can bring back the NU801 userspace driver for platforms that rely on it. Currently it's used on the MX100 x86_64 target, but other Meraki platforms use this controller. Note that we also now change how we load nu801. The way we did this previously with procd worked, but it meant it didn't load until everything was up and working. To fix this, let's call nu801 from boot and re-trigger the preinit blink sequence. Since nu801 runs as a daemon this is now something we can do. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> (removed empty line, currently only MX100 uses it so: @TARGET_x86) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: Support Chromium OS image-type creationBrian Norris2022-03-251-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | See firmware-utils.git commits [1], which implemented the cros-vbutil verified-boot payload-packing tool, and extended ptgen for the CrOS kernel partition type. With these, it's now possible to package kernel + rootfs to make disk images that can boot a Chrome OS-based system (e.g., Chromebooks, or even a few AP models). Regarding PARTUUID= changes: Chromium bootloaders work well with a partition number offset (i.e., relative to the kernel partition), so we'll be using a slightly different root UUID line. NB: I've made this support specific to ip40xx for now, because I only plan to support an IPQ4019-based AP that uses a Chromium-based bootloader, but this image format can be used for essentially any Chromebook, as well as the Google OnHub, a prior Chromium-based AP using an IPQ8064 chipset. [1] ptgen: add Chromium OS kernel partition support https://git.openwrt.org/?p=project/firmware-utils.git;a=commit;h=6c95945b5de973026dc6f52eb088d0943efa96bb cros-vbutil: add Chrome OS vboot kernel-signing utility https://git.openwrt.org/?p=project/firmware-utils.git;a=commit;h=8e7274e02fdc6f2cb61b415d6e5b2e1c7e977aa1 Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* firmware/ipq-wifi: Add Google Wifi board-2.binBrian Norris2022-03-252-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From a manufacturer's image (version R89-13729.57.27), with appopriate ',variant=' appended to the board names: $ .../qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder \ -i ./board-google_wifi.qca4019 FileSize: 48596 FileCRC32: 3966df5d FileMD5: d54161b0fb9e93691c4272649c37535a BoardNames[0]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GO_GALE' BoardLength[0]: 12064 BoardCRC32[0]: e117f336 BoardMD5[0]: ea35e78c88a8571201da8b75edc9b881 BoardNames[1]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GO_GALE' BoardLength[1]: 12064 BoardCRC32[1]: 6c751ec9 BoardMD5[1]: 44cbc4ca6cb7141ba4249615f7065582 BoardNames[2]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GO_BREEZE' BoardLength[2]: 12064 BoardCRC32[2]: 24fba117 BoardMD5[2]: b4ac055b3ab67d5a6f5607a96af39a1f BoardNames[3]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GO_BREEZE' BoardLength[3]: 12064 BoardCRC32[3]: a3e16b2a BoardMD5[3]: 8b26cb285032314247304114b8ac50e7 Naming follows existing Google projects included in upstream board-2.bin -- GO(ogle) prefix, an underscore (_), and the project code name, all in caps. Note that I only tested the "gale" model; the "breeze" model is a later revision (same marketing name) with very small hardware changes but otherwise using the same firmware image. Submitted upstream here: ath10k-firmware: QCA4019: hw1.0: Add Google Wifi BDFs http://lists.infradead.org/pipermail/ath10k/2022-March/013465.html https://lore.kernel.org/ath10k/YjaNGW252Ls%2FyDw8@localhost/ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* kernel: Package GOOGLE_FIRMWARE driversBrian Norris2022-03-251-0/+26
| | | | | | Useful for some Chromium OS based systems, like Google WiFi. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* libselinux: use musl-fts for host buildsRosen Penev2022-03-251-2/+5
| | | | | | | | Fixes compilation under musl based distros like Alpine Linux. Also add pcre/host as a build dependency as it's needed. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* musl-fts: add host buildRosen Penev2022-03-251-0/+2
| | | | | | This will be used for libselinux. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* gettext-full: add gmsgfmt symlink in host installStijn Tintel2022-03-251-0/+5
| | | | | | | | | | | | | | Some configure scripts look for msgfmt and gmsgfmt. As we don't install the latter, configure might pick up one from staging_dir/hostpkg, and the other from the host: checking for msgfmt... /home/stijn/Development/OpenWrt/openwrt/staging_dir/hostpkg/bin/msgfmt checking for gmsgfmt... /usr/bin/gmsgfmt This could potentially lead to hard to debug undefined behaviour. Install a symlink in the host install phase to avoid this. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* openwrt-keyring: add OpenWrt 22.03 GPG/usign keysPetr Štetiar2022-03-251-3/+3
| | | | | | | 62471e693b4f usign: add 22.03 release build public key 70817cffc905 gpg: add OpenWrt 22.03 signing key Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uqmi: fix acquiring PIN statusDaniel Golle2022-03-241-4/+8
| | | | | | | | | | | | Evaluating the return value of 'json_load' didn't work in the intended way resulting in PIN status no longer being read on modems where --get-pin-status doesn't fail. Fix this by trying --get-pin-status first and checking if pin1_status field exists in JSON, and if it doesn't try again with --uim-get-sim-state. Fixes: #9501 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* zlib: backport security fix for a reproducible crash in compressorPetr Štetiar2022-03-242-1/+344
| | | | | | | | | | | | | | Tavis has just reported, that he was recently trying to track down a reproducible crash in a compressor. Believe it or not, it really was a bug in zlib-1.2.11 when compressing (not decompressing!) certain inputs. Tavis has reported it upstream, but it turns out the issue has been public since 2018, but the patch never made it into a release. As far as he knows, nobody ever assigned it a CVE. Suggested-by: Tavis Ormandy <taviso@gmail.com> References: https://www.openwall.com/lists/oss-security/2022/03/24/1 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* openssl: move engine.mk to INCLUDE_DIREneas U de Queiroz2022-03-232-48/+2
| | | | | | | | | engine.mk is supposed to be included by engine packages, but it will not be present in the SDK in the same place as in the main repository. Move it to include/openssl-engine.mk to avoid this. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* odhcpd: update to git HEADHans Dedecker2022-03-221-3/+3
| | | | | | | 860ca90 odhcpd: Support for Option NTP and SNTP 83e14f4 router: advertise removed addresses as invalid in 3 consecutive RAs Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* qosify: update to the latest versionFelix Fietkau2022-03-221-3/+3
| | | | | | 57c7817f91c2 qosify: fix dscp values of ubus-added dns host entries Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kmod-lzo: include the lzo-rle kmod in the packageRui Salvaterra2022-03-221-1/+2
| | | | | | | | | | Albeit a separate crypto module, lzo-rle uses the same kernel library as lzo. Crypto API users (zram, for example) expect both lzo and lzo-rle to be available, so let's include lzo-rle (about 5.5 kiB) in the lib-lzo package. Based on e9hack's original patch: https://patchwork.ozlabs.org/project/openwrt/patch/541cbfbd-76f2-59b3-a867-47b6f0fc7da9@gmail.com/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* uboot-mediatek: add patch to allow accessing bootconf from LinuxDaniel Golle2022-03-211-0/+60
| | | | | | | | Store selected boot configuration in '/chosen' node in device tree, so it can be accessed by Linux (and used for fine-tuning the FIT partition parser). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-envtools: oxnas: fix wrong eraseblock size for shuttle,kd20Daniel Golle2022-03-211-1/+1
| | | | | | | | Shuttle KD20 has NAND flash with 0x20000 (128KiB) erase blocks. Correctly set that in uboot-envtools as well to allow writing to the bootloader environment using fw_setenv. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* qosify: update to the latest versionFelix Fietkau2022-03-211-3/+3
| | | | | | | | | | | | | | | 391a9fbd5ace dns: fix parsing vlan encapsulated protocol 6aeeddbc91ad interface: extend dns filters to cover vlan tagged traffic as well 1ab53d4ca601 bpf: return TC_ACT_UNSPEC to allow other filters to proceed ca21e729af23 interface: switch to using clsact for filters 5d158f6b3c15 interface: run ingress bpf filter on main device ingress instead of ifb egress bdfcb11847ce interface: fix duplicated dns filter line b97405aa632a Revert "ubus: remove dnsmasq subscriber" 8fbaf39dbc95 interface: rework adding/removing filters, do not delete clsact d7ba5804eae4 interface: replace open-coded ifb-dns string with QOSIFY_DNS_IFNAME 91cf440db9e2 loader: fix use of deprecated functions Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-mvebu: backport patch to fix eMMCRobert Marko2022-03-211-0/+64
| | | | | | | | | | v2022.01 has a regression that broke eMMC usage on most if not all Armada SoC-s, thus breaking boards like uDPU which use eMMC for storage. Fix it by backporting a recent upstream patch. Fixes: 782d4c8306c8 ("uboot-mvebu: update to version 2022.01") Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ltq-vdsl-mei: add locking to interrupt handlerJan Hoffmann2022-03-212-1/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some users noticed repeated resyncs at random intervals, which go away when the MEI driver is configured to use polling instead of interrupts. Debugging shows that this seems to be caused by concurrent calls to MEI_ReadMailbox (in the interrupt handler) and MEI_WriteMailbox. This appears to be mostly triggered when there is an interrupt for vectoring error reports. In polling mode, calls to MEI_ReadMailbox are protected by the same semaphore as is used in MEI_WriteMailbox. When interrupts are used, MEI_WriteMailbox appears to rely on MEI_DisableDeviceInt and MEI_EnableDeviceInt to provide mutual exclusion with the interrupt handler. These functions mask/unmask interrupts, and there is an additional check of the mask in the interrupt handler itself. However, this is not sufficient on systems with SMP, as the interrupt handler may be running in parallel, and could already be past the interrupt mask check at this point. This adds a lock to the interrupt handler, and also acquires this lock in MEI_DisableDeviceInt. This should make sure that after a call to MEI_DisableDeviceInt the interrupt is masked, and the interrupt handler is either not running, has alread finished its work, or is still before the interrupt mask check, and is thus going to detect the change. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* ltq-vdsl-app: set MAC address for vectoring error reportsJan Hoffmann2022-03-211-6/+14
| | | | | | | | | | | | This tells the modem about the WAN MAC address, which is used as source address for vectoring error reports that are generated by the firmware. It needs to be set early, as the MEI driver only actually writes the value to the modem when is in reset state (i.e. the firmware has been loaded, but connection has not started yet). Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* ltq-vdsl-mei: enable vectoring error sample callbackJan Hoffmann2022-03-212-13/+2
| | | | | | | | This re-enables the vectoring error sample callback and adds a dependency to the corresponding driver. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* ltq-vectoring: add driverJan Hoffmann2022-03-214-0/+349
| | | | | | | | | | | | | | | | | | | | | | | | In order to calculate the required pre-distortion for downstream vectoring, the vectoring control entity (VCE) at the carrier office needs error samples from the modem. On Lantiq VR9 modems, error reports are generated by the firmware, but need to be multiplexed into the data stream by the driver on the main processor when L2 encapsulation is selected by the VCE. This driver provides the necessary callback function, which is called by the MEI driver after receiving an error report from the firmware. Originally, it is part of the Lantiq PPA driver, but after a few changes it also works with the PTM driver used in OpenWrt. The direct call to ndo_start_xmit needs to be replaced, as the PTM driver relies on locks from the kernel. Instead dev_queue_xmit is used, which is called from a work queue, as it is not safe to call from an interrupt handler. Additional changes include fixes to support recent kernel versions and a change of the used interface from ptm0 to dsl0. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* mediatek: Add support for Xiaomi Redmi Router AX6SRichard Huynh2022-03-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also known as the "Xiaomi Router AX3200" in western markets, but only the AX6S is widely installation-capable at this time. SoC: MediaTek MT7622B RAM: DDR3 256 MiB (ESMT M15T2G16128A) Flash: SPI-NAND 128 MiB (ESMT F50L1G41LB or Gigadevice GD5F1GQ5xExxG) WLAN: 2.4/5 GHz 4T4R 2.4 GHz: MediaTek MT7622B 5 GHz: MediaTek MT7915E Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531B LEDs/Keys: 2/2 (Internet + System LED, Mesh button + Reset pin) UART: Marked J1 on board VCC RX GND TX, beginning from "1". 3.3v, 115200n8 Power: 12 VDC, 1.5 A Notes: U-Boot passes through the ethaddr from uboot-env partition, but also has been known to reset it to a generic mac address hardcoded in the bootloader. However, bdata is also populated with the ethernet mac addresses, but is also typically never written to. Thus this is used instead. Installation: 1. Flash stock Xiaomi "closed beta" image labelled 'miwifi_rb03_firmware_stable_1.2.7_closedbeta.bin'. (MD5: 5eedf1632ac97bb5a6bb072c08603ed7) 2. Calculate telnet password from serial number and login 3. Execute commands to prepare device nvram set ssh_en=1 nvram set uart_en=1 nvram set boot_wait=on nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit 4. Download and flash image On computer: python -m http.server On router: cd /tmp wget http://<IP>:8000/factory.bin mtd -r write factory.bin firmware Device should reboot at this point. Reverting to stock: Stock Xiaomi recovery tftp that accepts their signed images, with default ips of 192.168.31.1 + 192.168.31.100. Stock image should be renamed to tftp server ip in hex (Eg. C0A81F64.img) Triggered by holding reset pin on powerup. A simple implementation of this would be via dnsmasq's dhcp-boot option or using the vendor's (Windows only) recovery tool available on their website. Signed-off-by: Richard Huynh <voxlympha@gmail.com>
* ncurses: update to 6.3Huangbin Zhan2022-03-196-37/+37
| | | | | | release notes: https://invisible-island.net/ncurses/announce-6.3.html Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
* ramips: add support for Beeline SmartBox FlashMikhail Zhilkin2022-03-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Beeline SmartBox Flash is a wireless AC1300 (WiFi 5) router manufactured by Arcadyan company. Device specification -------------------- SoC Type: MediaTek MT7621AT RAM: 256 MiB, Winbond W632GU6NB Flash: 128 MiB (NAND), Winbond W29N01HVSINF Wireless 2.4 GHz (MT7615DN): b/g/n, 2x2 Wireless 5 GHz (MT7615DN): a/n/ac, 2x2 Ethernet: 3xGbE (WAN, LAN1, LAN2) USB ports: 1xUSB3.0 Button: 1 (Reset/WPS) LEDs: 1 RGB LED Power: 12 VDC, 1.5 A Connector type: Barrel Bootloader: U-Boot (Ralink UBoot Version: 5.0.0.2) OEM: Arcadyan WE42022 Installation ------------ 1. Place *factory.trx on any web server (192.168.1.2 in this example) 2. Connect to the router using telnet shell (no password required) 3. Save MAC adresses to U-Boot environment: uboot_env --set --name eth2macaddr --value $(ifconfig | grep eth2 | \ awk '{print $5}') uboot_env --set --name eth3macaddr --value $(ifconfig | grep eth3 | \ awk '{print $5}') uboot_env --set --name ra0macaddr --value $(ifconfig | grep ra0 | \ awk '{print $5}') uboot_env --set --name rax0macaddr --value $(ifconfig | grep rax0 | \ awk '{print $5}') 4. Ensure that MACs were saved correctly: uboot_env --get --name eth2macaddr uboot_env --get --name eth3macaddr uboot_env --get --name ra0macaddr uboot_env --get --name rax0macaddr 5. Download and write the OpenWrt images: cd /tmp wget http://192.168.1.2/factory.trx mtd_write erase /dev/mtd4 mtd_write write factory.trx /dev/mtd4 6. Set 1st boot partition and reboot: uboot_env --set --name bootpartition --value 0 reboot Back to Stock ------------- 1. Run in the OpenWrt shell: fw_setenv bootpartition 1 reboot 2. Optional step. Upgrade the stock firmware with any version to overwrite the OpenWrt in Slot 1. MAC addresses ------------- +-----------+-------------------+----------------+ | Interface | MAC | Source | +-----------+-------------------+----------------+ | label | 30:xx:xx:51:xx:09 | No MACs was | | LAN | 30:xx:xx:51:xx:09 | found on Flash | | WAN | 30:xx:xx:51:xx:06 | [1] | | WLAN_2g | 30:xx:xx:51:xx:07 | | | WLAN_5g | 32:xx:xx:41:xx:07 | | +-----------+-------------------+----------------+ [1]: a. Label wasb't found neither in factory nor in other places. b. MAC addresses are stored in encrypted partition "glbcfg". Encryption key hasn't known yet. To ensure the correct MACs in OpenWrt, a hack with saving of the MACs to u-boot-env during the installation was applied. c. Default Ralink ethernet MAC address (00:0C:43:28:80:36) was found in "Factory" 0xfff0. It's the same for all Smartbox Flash devices. OEM firmware also uses this MAC when initialazes ethernet driver. In OpenWrt we use it only as internal GMAC (eth0), all other MACs are unique. Therefore, there is no any barriers to the operation of several Smartbox Flash devices even within the same broadcast domain. Stock firmware image format --------------------------- +--------------+---------------+----------------------------------------+ | Offset | 1.0.15 | Description | +==============+===============+========================================+ | 0x0 | 5d 43 6f 74 | TRX magic "]Cot" | +--------------+---------------+----------------------------------------+ | 0x4 | 00 70 ff 00 | Length (reverse) | +--------------+---------------+----------------------------------------+ | | | htonl(~crc) from 0xc ("flag_version") | | 0x8 | 72 b3 93 16 | to "Length" | +--------------+---------------+----------------------------------------+ | 0xc | 00 00 01 00 | Flags | +--------------+---------------+----------------------------------------+ | | | Offset (reverse) of Kernel partition | | 0x10 | 1c 00 00 00 | from the start of the header | +--------------+---------------+----------------------------------------+ | | | Offset (reverse) of RootFS partition | | 0x14 | 00 00 42 00 | from the start of the header | +--------------+---------------+----------------------------------------+ | 0x18 | 00 00 00 00 | Zeroes | +--------------+---------------+----------------------------------------+ | 0x1c | 27 05 19 56 … | Kernel data + zero padding | +--------------+---------------+----------------------------------------+ | | | RootFS data (starting with "hsqs") + | | 0x420000 | 68 73 71 73 … | zero padding to "Length" | +--------------+---------------+----------------------------------------+ | | | Some signature data (format is | | | | unknown). Necessary for the fw | | "Lenght" | 00 00 00 00 … | update via oem fw web interface. | +--------------+---------------+----------------------------------------+ | "Lenght" + | | TRX magic "HDR0". U-Boot is | | 0x10c | 48 44 52 30 | checking it at every boot. | +--------------+---------------+----------------------------------------+ | | | 1.00: | | | | Zero padding to ("Lenght" + 0x23000) | | | | 1.0.12: | | | | Zero padding to ("Lenght" + 0x2a000) | | "Lenght" + | | 1.0.13, 1.0.15, 1.0.16: | | 0x110 | 00 00 00 00 | Zero padding to ("Lenght" + 0x10000) | +--------------+---------------+----------------------------------------+ Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* base-files: add wrapper for procd service list commandFlorian Eckert2022-03-191-0/+8
| | | | | | | | | | | | | | | | A service managed by procd does have a json object with usefull information. This information could by dumped with the following command. ubus call service list "{ 'verbose':true, 'name': '<service-name>)'". }" This line is long and complicated to enter. This commit adds a wrapper call to the procd service section tool to simplify the input and get the output faster. We could now enter the command /etc/initd/<service> info to get the info faster. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* procd: move service command to procdFlorian Eckert2022-03-193-21/+31
| | | | | | | | The service command belongs to the procd and does not belong in the shinit. In the course of the move, the script was also checked with shellcheck and cleaned up. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* iptables: bump PKG_RELEASEEtienne Champetier2022-03-191-1/+1
| | | | | | Following {arp,eb}tables-nft addition, bump PKG_RELEASE Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* iptables: add {arp,eb}tables-nftEtienne Champetier2022-03-192-0/+145
| | | | | | | Add a patch to add some missing init_extensions{a,b}() calls Package lib{arp,eb}t_*.so Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* iptables: add xtables-nft packageEtienne Champetier2022-03-191-3/+14
| | | | | | | This allows to install ip6tables-nft without iptables-nft This prepare the addition of {arp,eb}tables-nft Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* iptables: add xtables-legacy packageEtienne Champetier2022-03-191-3/+14
| | | | | | This allows to install ip6tables-legacy without iptables-legacy Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* ebtables: rename to ebtables-legacyEtienne Champetier2022-03-191-14/+21
| | | | | | | | This prepare the introduction of ebtables-nft. Add PROVIDES so dependencies are not broken, use ALTERNATIVES. Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* arptables: rename package to arptables-legacyEtienne Champetier2022-03-191-4/+7
| | | | | | | | This prepare the introduction of arptables-nft. Add PROVIDES so dependencies are not broken, use ALTERNATIVES. Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* cypress-firmware: update it to version 5.4.18-2021_0812Josef Schlehofer2022-03-191-38/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Binary files were renamed to cyfmac from brcmfmac, but the files needs to be on the router with the previous naming [ 6.656165] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 6.665182] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.bin failed with error -2 [ 6.674928] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.bin - Cypress were acquired by Infineon Technologies Thus change the project URL and switch to download files from their GitHub repository. This is much better than the previous solution, which requires finding new threads on their community forum about new driver updates, and it will be necessary to change the URL each time. Unfortunately, it seems that there is not published changelog, but according to this forum thread [1], be careful by opening the link from solution since it contains ending bracket ), it brings fixes for various security vulnerabilities, which were fixed in 7_45_234. Fixes: - FragAttacks - Kr00k Also add LICENSE file Run tested on Seeedstudio router powered by Raspberry Pi 4 CM with package cypress-firmware-43455-sdio. Before: root@OpenWrt:~# dmesg | grep 'Firmware: BCM4345/6' [ 6.895050] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:20:01 version 7.45.206 (r725000 CY) FWID 01-febaba43 After: root@OpenWrt:~# dmesg | grep 'Firmware: BCM4345/6' [ 6.829805] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2 [1] https://community.infineon.com/t5/Wi-Fi-Bluetooth-for-Linux/Outdated-brcmfmac-firmware-for-Raspberry-Pi-4-in-OpenWrt-21-02-1/m-p/331593#M2269 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* iwinfo: update to latest Git headJosef Schlehofer2022-03-191-3/+3
| | | | | | | | | Changelog: 90bfbb9 devices: Add Cypress CYW43455 234075b devices: fix AMD RZ608 format 0e2a318 devices: add AMD RZ608 device-id Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* bpftools: fix library path on 64 bit systemsFelix Fietkau2022-03-191-3/+3
| | | | | | | drop the use of LIB_SUFFIX Fixes: 00cbf6f6ab1d ("bpftools: update to standalone bpftools + libbpf, use the latest version") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bpftools: update to standalone bpftools + libbpf, use the latest versionFelix Fietkau2022-03-196-117/+64
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-12 08:18:18 +0000