aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* ltq-deu: add aes_gcm algorithmDaniel Kestrel2022-01-061-0/+313
| | | | | | | | | | | | The lantiq AES hardware does not support the gcm algorithm. But it can be implemented in the driver as a combination of the aes_ctr algorithm and the xor plus gfmul operations for the hashing. Due to the wrapping of the several algorithms and the inefficient 16 byte block by 16 byte block invokation in the kernel implementations, this driver is about 3 times faster for the larger block sizes. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: change PKG_RELEASE to AUTORELEASEDaniel Kestrel2022-01-061-1/+1
| | | | | | As per suggestion by adschm, PKG_RELEASE is set to AUTORELEASE. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: remove redundant code for setting the key in aesDaniel Kestrel2022-01-061-120/+4
| | | | | | | | | | After adding xts and cbcmac the aes algorithm source had three sections for setting the aes key to the hardware which are identical. Method aes_set_key_hw was created which is now called from within the spinlock secured control sections in methods ifx_deu_aes, ifx_deu_aes_xts and aes_cbcmac_final_impl and reduces the size of ifxmips_aes.c. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: add shash cbcmac-aes algorithm to the driverDaniel Kestrel2022-01-061-5/+362
| | | | | | | | | | | | | | | | | | | Since commit 53b6783 hostapd is using the kernel api which includes the cbcmac-aes shash algorithm. The kernels implementation is a wrapper around the aes encryption algorithm, which encrypts block (16 bytes) by block. When the ltq-deu driver is present, it uses hardware aes, but every 16 byte encrypt requires setting the key. This is very inefficient and is a huge overhead. Since the cbcmac-aes is simply a hash that uses the cbc aes algorithm starting with an iv set to x'00' with an optional ecb aes encryption of a possible last incomplete block that is padded with the positional bytes of the last cbc encrypted block, this algorithm is now added to the driver. Most of the code is derived from md5-hmac and tailored for aes. Tested with the kernels crypto testmgr including extra tests against the kernels generic ccm module implementation. This patch also fixes the overallocation in the aes_ctx that is caused by using u32 instead of u8 for the aes keys. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: remove driver disablement for kernel 5.4 and aboveDaniel Kestrel2022-01-061-1/+1
| | | | | | | | Remove the dependency on kernel 5.4 from the Makefile to allow the driver to compile with kernel 5.10 or kernel versions higher than 5.4. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: add aes_xts algorithmDaniel Kestrel2022-01-061-0/+324
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lantiq AES hardware does not support the xts algorithm. Apart from the cipher text stealing (XTS), the AES XTS implementation is just an XOR with the IV, followed by AES ECB, followed by another XOR with the IV and as such can be also implemented by using the lantiq hardware's CBC AES implemention plus one additional XOR with the IV in the driver. The output IV by CBC AES is also not usable and the gfmul operation not supported by lantiq hardware. Both need to be done in the driver too in addition to the IV treatment which is the initial encryption by the other half of the input key and to set the IV to the IV registers for every block. In the generic kernel implementation, the block size for XTS is set to 16 bytes, although the algorithm is designed to process any size of input larger than 16 bytes. But since there is no way to indicate a minimum input length, the block size is used. This leads to certain issues when the skcipher walk functions are used, e.g. processing less than block size bytes is not supported by calling skcipher_walk_done. The walksize is 2 AES blocks because otherwise for splitted input or output data, less than blocksize is to be returned in some cases, which cannot be processed. Another issue was that depending on possible split of input/output data, just 16 bytes are returned while less than 16 bytes were remaining, while cipher text stealing requires 17 bytes or more for processing. For example, if the input is 60 bytes and the walk is 48, then processing 48 bytes leads to a return code of -EINVAL for skcipher_walk_done. Therefor the processed counter is used to figure out, when the actual cipher text stealing for the remaining bytes less than blocksize needs to be applied. Measured with cryptsetup benchmark, this XTS AES implementation is about 19% faster than the kernels XTS implementation that uses the hardware ECB AES (ca. 18.6 MiB/s vs. 15.8 MiB/s decryption 256b key). The implementation was tested with the kernels crypto testmgr against the kernels generic XTS AES implementation including extended tests. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: update initialisations for hmac algorithmsDaniel Kestrel2022-01-062-6/+4
| | | | | | | | | | | | The processing in the hmac algorithms depends on the status fields: count, dbn and started. Not all were initialised in the init method and after finishing the final method. Added missing fields to init method and call init method after finishing final. The memsets have the wrong size in the original driver and did not clear everything and are not necessary. Since no memset is done in the kernels generic implementation, memsets were removed. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: remove compiler warning and shorten locked sectionsDaniel Kestrel2022-01-067-43/+7
| | | | | | | | | | | | Removing hash pointer in _hmac_setkey since its not needed and causes a compiler warning. Make the spinlock control sections shorter and move initializations out of the control sections to free the spinlock faster for allowing other threads to use the hash engine. Minor improvements for indentation and removal of blanks and blank lines in some areas. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: fix temp size exceed in hmac algorithmsDaniel Kestrel2022-01-062-71/+146
| | | | | | | | | | | | | | | | | | | | | | | | | Exceeding the temp array size was not checked and instead storage not allocated by the driver was used/overwritten which in most cases resulted in reboots. This patch implements processing the input to the hash algorithm in tempsize chunks. The _hmac_final methods were changed to _hmac_final_impl adding a parameter that indicates intermediate or final processing. The started variable was added to the context to indicate, if there is an intermediate result in the context. For sha1_hmac the variable to store the intermediate hash was added to the context too. In order to avoid md5_hmac_final_impl being recursively called if the padding of the input and the resulting last transform during the hmac algorighms final processing causes the temp array to overflow and to make sure that there is at least one block in the temp array when the _hmac_final for final processing is called, the check for exceeding the temp array in _hmac_transform was moved before copying the block and incrementing dbn. dbn needs to be at least 1 at final processing time to let the hash engine apply the opad operation. To make the hash engine not apply the hmac algorithms final opad operation, for intermediate processing the dbn in the control register is set to a higher value than number of dbns are actually processed. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: fix setkey errors and static shared temp for hmac algosDaniel Kestrel2022-01-062-52/+137
| | | | | | | | | | | | | | | | | | | The hmac algorithms state, that keys larger than the key size should be hashed with the underlying hash algorithms and then those hashes are to be used as keys. This patch implements this. In order to avoid allocating a descriptor during setkey, a shash_desc pointer is added to the context. Another issue for multithreaded callers is the shared temp array. The temp array is static and as such would be shared among multithreaded callers, which obviously would neither work nor produce correct results. The temp array (4k size) is moved to the context and since the size of the context is limited, it can only be defined as pointer otherwise the initialisation of the hash algorithm fails. The allocations and freeing of both the temp and the desc pointer in the context are done by implementing cra_init and cra_exit functions for the hmac algorithms. Also improved indentation in some areas. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: fix ifxdeu-ctr-rfc3686(aes) not matching generic implDaniel Kestrel2022-01-061-1/+2
| | | | | | | | Error ifxdeu-ctr-rfc3686(aes) (16) doesn't match generic impl (20) occurs when running the cryptomgr extra tests that compare against the linux kernels generic implementation. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: changes for hash multithread callers and md5 endianessDaniel Kestrel2022-01-066-79/+45
| | | | | | | | | | | | | | | | | | | | | | | | | The algorithms sha1, sha1_hmac and md5_hmac all use ENDI=1. The md5 algorithm uses ENDI=0 and the endian_swap methods to reverse the endianess switch by using user CPU time, which is unnecessary overhead. Danube and AR9 devices do not set endianess for SHA1, so is done for MD5. Furthermore the patch replaces endian_swap with le32_to_cpu for md5 and md5 hmac algorithms and removes endian_swap for them. The init functions initialize the algorithm in the hardware. The lock is not used to write to the control register. If another thread calls another hash algo before update or final, the result will be wrong. Therefore move the algorithm init to the lock protected sections in the transform or final methods. Setting the hw key for the hmac algorithms is now done from within the lock protected sections in their final methods. The lock protecting is removed from the _hmac_setkey_hw functions. In final for md5 and sha1 the lock section is removed, because all the work was already done in transform (which is called from final). As such only copying the hash to the output is required. MD5 and MD5_HMAC produce 16 byte hashes (4 DWORDS) only, therefor writing register D5R to the hash output is removed for MD5_HMAC. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: make deu hash lock global and remove md5_hmac_ exportsDaniel Kestrel2022-01-066-48/+23
| | | | | | | | | | | All hash algorithms use the same base IFX_HASH_CON to access the hash unit. Parallel threads should not be able to call different hash algorithms and therefor a global lock is required. Fixed linker warning, that md5_hmac_init, md5_hmac_update and md5_hmac_final are static export symbols. The export symbols are not required, because the functions are exposed using shash_alg structure. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: add aes_ofb and aes_cfb algorithmsDaniel Kestrel2022-01-061-0/+194
| | | | | | | | | The functions ifx_deu_aes_cfg and ifx_deu_aes_ofb have been part of the driver ever since. But the functions and definitions to make the algorithms actually usable were missing. This patch adds the neccessary code for aes_ofb and aes_cfb algorithms. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: fix cryptomgr test errors for aesDaniel Kestrel2022-01-061-45/+44
| | | | | | | | | | | When running cryptomgr tests against the driver, there are several occurences of different errors for even and uneven splitted data in the underlying scatterlists for the ctr and ctr_rfc3686 algorithms which are now fixed. Fixed error in ctr_rfc3686_aes_decrypt function which was introduced with the previous commit by using CRYPTO_DIR_ENCRYPT in the decrypt function. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: fix cryptomgr test errors for desDaniel Kestrel2022-01-062-31/+58
| | | | | | | | | | | | | | | | | | | | | | When running cryptomgr tests against the driver, there are several occurences of different errors for setkey of des and des3-ede algorithms. Those key checks are already implemented in the kernels des implementation, so this is added as dependency and the kernel methods are called. It also required adding the kernels des/des3 context definitions to the des_ctx internal structure to be able to call the kernel methods. Fixed ifxdeu-des... setkey unexpectedly succeeded on test vector x; expected_error=-22. Fixed ifxdeu-des... setkey failed on test vector x; expected_error=0, actual_error=-22. Renamed des_ctx internal structure and des_encrypt/des_decrypt methods because they are already defined in the kernel module. Fixed wrong DES_xxx constant definitions in crypto_alg definition for ifxdeu_des3_ede_alg. Fixed method comment errors. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: convert SHA1 after library impl of SHA1 was removedDaniel Kestrel2022-01-062-9/+9
| | | | | | | | | The <linux/cryptohash.h> was removed with Linux 5.8, because it only contained the library implementation of SHA1, which was folded into <crypto/sha.h>. So switch this driver away from using <linux/cryptohash.h>. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: convert blkcipher to skcipherDaniel Kestrel2022-01-063-464/+413
| | | | | | | | | Convert blkcipher to skcipher for the synchronous versions of AES, DES and ARC4. The Block Cipher API was depracated for a while and was removed with Linux 5.5. So switch this driver to the skcipher API. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: set correct control register for AESDaniel Kestrel2022-01-061-1/+1
| | | | | | | | | | | | Some devices initialize AES during boot and AES works out of the box and the correct endianess is set. NDC means (No Danube Compatibility Mode) and the endianess setting has no effect if its set to 0. NDC 0: OFF ENDI bit cannot be written as in Danube To make it work for other devices, the NDC control register needs to be set to 1. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: make cipher/digest usable by opensslMathias Kresin2022-01-059-28/+28
| | | | | | | | | | OpenSSL with cryptdev support uses the data encryption unit (DEU) driver for hard accelerated processing of ciphers/digests, if the flag CRYPTO_ALG_KERN_DRIVER_ONLY is set. Signed-off-by: Mathias Kresin <dev@kresin.me> [fix commit title prefix] Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: aes-ctr: process all input dataMathias Kresin2022-01-051-31/+21
| | | | | | | | | | | | | | | | | | | | | | | Even if the minimum blocksize is set to 16 (AES_BLOCK_SIZE), the crypto manager tests pass 499 bytes of data to the aes-ctr encryption, from which only 496 bytes are actually encrypted. Reading the comment regarding the minimum blocksize, it only states that it's the "smallest possible unit which can be transformed with this algorithm". Which doesn't necessarily mean, the data have to be a multiple of the minimal blocksize. All kernel hardware crypto driver enforce a minimum blocksize of 1, which perfect fine works for the lantiq data encryption unit as well. Lower the blocksize limit to 1, to process not padded data as well. In AES for processing the remaining bytes, uninitialized pointers were used. This patch fixes using uninitialized pointers and wrong offsets. Signed-off-by: Mathias Kresin <dev@kresin.me> [fix commit title prefix] Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: aes: do not read/write behind bufferMathias Kresin2022-01-051-12/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When handling non-aligned remaining data (not padded to 16 byte [AES_BLOCK_SIZE]), a full 16 byte block is read from the input buffer and written to the output buffer after en-/decryption. While code already assumes that an input buffer could have less than 16 byte remaining, as it can be seen by the code zeroing the remaining bytes till AES_BLOCK_SIZE, the full AES_BLOCK_SIZE is read. An output buffer size of a multiple of AES_BLOCK_SIZE is expected but never validated. To get rid of the read/write behind buffer, use a temporary buffer when dealing with not padded data and only write as much bytes to the output as we read. Do not memcpy directly to the register, to make used of the endian swap macro and to trigger the crypto start operator via the ID0R to trigger the register. Since we might need an endian swap for the output in future, use a temporary buffer for the output as well. The issue could not be observed so far, since all caller of ifx_deu_aes will ignore the padded (remaining) data. Considering that the minimum blocksize for the algorithm is set to AES_BLOCK_SIZE, the behaviour could be called expected. Signed-off-by: Mathias Kresin <dev@kresin.me> [fix commit title prefix] Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: init des/aes before registering crpyto algorithmsMathias Kresin2022-01-052-3/+2
| | | | | | | | | | | | | | The crypto algorithms are registered and available to the system before the chip is actually powered on and the generic parameter for the DEU behaviour set. The issue can mainly be observed if the crypto manager tests are enabled in the kernel config. The crypto manager test run directly after an algorithm is registered. Signed-off-by: Mathias Kresin <dev@kresin.me> [fix commit title prefix] Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* lua: add HOST_FPIC for host buildsPaul Spooren2022-01-032-4/+4
| | | | | | | | | Compiling without fPIC causes linking issues for packages using liblua. Add $(HOST_FPIC) to host builds for both lua and lua5.3. Suggested-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Paul Spooren <mail@aparcar.org>
* binutils: fix compiling with arch-based distrosNick Hainke2022-01-021-2/+2
| | | | | | | | | | | | | | | | | | | Arch Linux users have encountered problems with packages that have a dependency on binutils. This error happens when libtool is doing: libtool: relink: ... So change PKG_FIXUP to "patch-libtool". Fixes error in the form of: libtool: install: error: relink `libctf.la' with the above command before installing it Upstream Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28545 OpenWrt Bug: https://bugs.openwrt.org/index.php?do=details&task_id=4149 Acked-by: John Audia <graysky@archlinux.us> Signed-off-by: Nick Hainke <vincent@systemli.org>
* openssl: bump to 1.1.1mEneas U de Queiroz2022-01-013-14/+7
| | | | | | | | | | | | | This is a bugfix release. Changelog: *) Avoid loading of a dynamic engine twice. *) Fixed building on Debian with kfreebsd kernels *) Prioritise DANE TLSA issuer certs over peer certs *) Fixed random API for MacOS prior to 10.12 Patches were refreshed. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* hostapd: refresh patchsetNick Hainke2021-12-314-11/+11
| | | | | | | | | | | | | | Recently the hostapd has undergone many changes. The patches were not refreshed. Refreshed with make package/hostapd/{clean,refresh} Refreshed: - 380-disable_ctrl_iface_mib.patch - 600-ubus_support.patch - 700-wifi-reload.patch - 720-iface_max_num_sta.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* nftables: allow quoted string in flowtable_expr_memberStijn Tintel2021-12-312-1/+45
| | | | | | | This is required to be able to use flow offloading on devices with ifnames that start with a digit, like 6in4-wan6. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* utils/px5g-wolfssl: make selfsigned certicates compatible with chromiumSergey V. Lobanov2021-12-292-1/+21
| | | | | | | | | | | | | | Chromium based web-browsers (version >58) checks x509v3 extended attributes. If this check fails then chromium does not allow to click "Proceed to ... (unsafe)" link. This patch add three x509v3 extended attributes to self-signed certificate: 1. SAN (Subject Alternative Name) (DNS Name) = CN (common name) 2. Key Usage = Digital Signature, Non Repudiation, Key Encipherment 3. Extended Key Usage = TLS Web Server Authentication SAN will be added only if CONFIG_WOLFSSL_ALT_NAMES=y Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
* libs/wolfssl: add SAN (Subject Alternative Name) supportSergey V. Lobanov2021-12-292-2/+7
| | | | | | | | | x509v3 SAN extension is required to generate a certificate compatible with chromium-based web browsers (version >58) It can be disabled via unsetting CONFIG_WOLFSSL_ALT_NAMES Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
* kirkwood: add support for NETGEAR ReadyNAS Duo v2Pawel Dembicki2021-12-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NETGEAR ReadyNAS Duo v2 is a NAS based on Marvell kirkwood SoC. Specification: - Processor Marvell 88F6282 (1.6 GHz) - 256MB RAM - 128MB NAND - 1x GBE LAN port (PHY: Marvell 88E1318) - 1x USB 2.0 - 2x USB 3.0 - 2x SATA - 3x button - 5x leds - serial on J5 connector accessible from rear panel (115200 8N1) (VCC,TX,RX,GND) (3V3 LOGIC!) Installation by USB + serial: - Copy initramfs image to fat32 usb drive - Connect pendrive to USB 2.0 front socket - Connect serial console - Stop booting in u-boot - Do: usb reset setenv bootargs 'console=ttyS0,115200n8 earlyprintk' setenv bootcmd 'nand read.e 0x1200000 0x200000 0x600000;bootm 0x1200000' saveenv fatload usb 0:1 0x1200000 openwrt-kirkwood-netgear_readynas-duo-v2-initramfs-uImage bootm 0x1200000 - copy sysupgrade image via ssh. - run sysupgrade Installation by TFTP + serial: - Setup TFTP server and copy initramfs image - Connect serial console - Stop booting in u-boot - Do: setenv bootargs 'console=ttyS0,115200n8 earlyprintk' setenv bootcmd 'nand read.e 0x1200000 0x200000 0x600000;bootm 0x1200000' saveenv setenv serverip 192.168.1.1 setenv ipaddr 192.168.1.2 tftpboot 0x1200000 openwrt-kirkwood-netgear_readynas-duo-v2-initramfs-uImage bootm 0x1200000 - copy sysupgrade image via ssh. - run sysupgrade Known issues: - Power button and PHY INTn pin are connected to the same GPIO. It causes that every network restart button is pressed in system. As workaround, button is used as regular BTN_1. For more info please look at file: RND_5.3.13_WW.src/u-boot/board/mv_feroceon/mv_hal/usibootup/usibootup.c from Netgear GPL sources. Tested-by: Raylynn Knight <rayknight@me.com> Tested-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* packages: kernel: add i2c hwmon g762 kmod packagePawel Dembicki2021-12-291-0/+15
| | | | | | | This patch adds kernel module for Global Mixed-mode Technology Inc G762 and G763 fan speed PWM controller chips. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* tfa-layerscape: fix build on systems without openssl headersHauke Mehrtens2021-12-281-1/+2
| | | | | | | | | | | | | | | | | | The build fails when the openssl/sha.h header file is not installed on the host system. Fix this by setting the HOSTCCFLAGS variable to the OpenWrt HOST_CFLAGS variable, without setting this the include paths and other modifications in the host flags done by OpenWrt will be ignored by the build. This fixes the following build problem: gcc -c -D_GNU_SOURCE -D_XOPEN_SOURCE=700 -Wall -Werror -pedantic -std=c99 -O2 -I../../include/tools_share fiptool.c -o fiptool.o In file included from fiptool.h:16, from fiptool.c:19: fiptool_platform.h:19:11: fatal error: openssl/sha.h: No such file or directory 19 | # include <openssl/sha.h> | ^~~~~~~~~~~~~~~ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* layerscape: restool: Remove build of manpagesHauke Mehrtens2021-12-281-0/+18
| | | | | | | | The build of the manpages needs the pandoc tool, this is not in the minimal requirements of OpenWrt, just remove the build of the restool manpage. This fixes the build on systems without pandoc like the OpenWrt build bots. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: add fallback for WPS on stationsRaphaël Mélotte2021-12-271-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Up to now the WPS script triggered WPS on the stations only if it could not trigger it successfully on any hostapd instance. In a Multi-AP context, there can be a need (to establish a new wireless backhaul link) to trigger WPS on the stations, regardless of whether there is already a hostapd instance configured or not. The current script makes it impossible, as if hostapd is running and configured, WPS would always be triggered on hostapd only. To allow both possibilities, the following changes are made: - Change the "pressed" action to "release", so that we can make use of the "$SEEN" variables (to know for how long the button was pressed). - If the button is pressed for less than 3 seconds, keep the original behavior. - If the button is pressed for 3 seconds or more, trigger WPS on the stations, regardless of the status of any running hostapd instance. - Add comments explaining both behaviors. - While at it, replace the usage of '-a' with a '[] && []' construct (see [1]). This gives users a "fallback" mechanism to onboard a device to a Multi-AP network, even if the device already has a configured hostapd instance running. [1]: https://github.com/koalaman/shellcheck/wiki/SC2166 Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
* linux-firmware: amd: consolidate amd's linux-firmware entriesChristian Lamparter2021-12-274-65/+29
| | | | | | | | | | | | this patch consolidates the amd64-microcode (moved to linux-firmware.git, previously this was an extra debian source package download), amdgpu and radeon firmwares into a shared "amd" makefile. With the upcoming 20211216 linux-firmware bump, this will include a microcode update for ZEN 3 CPUs. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* umbim: add missing json_close_object callMartin Schiller2021-12-271-0/+1
| | | | | | | | Otherwise, connection setup may fail due to JSON parse error in netifd. Signed-off-by: Martin Schiller <ms@dev.tdt.de> [Updated commit description] Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: explicitly check for PIN1 stateMartin Schiller2021-12-271-1/+2
| | | | | | | | | | | PIN2 is used only to restrict changing of fixed dialling feature, does not affect network registration. Therefore explicitly check for PIN1 state during connection setup, which is required for network registration. Signed-off-by: Martin Schiller <ms@dev.tdt.de> [Updated commit description] Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: call umbim disconnect in error caseMartin Schiller2021-12-271-1/+13
| | | | | | | | This is needed to properly close the control channel. Otherwise, on the next try the caps call may fail. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* base-files: upgrade: fix efi partitions size calculationJavier Marcet2021-12-271-1/+1
| | | | | | | | | We were missing (not using) the last sector of each partition, compared with the output of gparted. Signed-off-by: Javier Marcet <javier@marcet.info> [moved the dot] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* hostapd: add missing function declarationDavid Bauer2021-12-271-0/+10
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* tcpdump: libpcap: Remove http://www.us.tcpdump.org mirrorHauke Mehrtens2021-12-272-4/+2
| | | | | | | | The http://www.us.tcpdump.org mirror will go offline soon, only use the normal download URL. Reported-by: Denis Ovsienko <denis@ovsienko.info> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* linux-firmware: Update to version 20121216Hauke Mehrtens2021-12-272-9/+3
| | | | | | | | | | | | | | | | | | | | | The rtl8723bs firmware was removed and a symlink to the rtl8723bu firmware was created like it is done in upstream linux-firmware. The following OpenWrt packages are changing: * amdgpu-firmware: Multiple updates and new files * ar3k-firmware: Multiple updates and new files * ath10k-firmware-qca6174: Updated ath10k/QCA6174/hw3.0/board-2.bin * bnx2x-firmware: Added bnx2x-e1-7.13.21.0.fw, bnx2x-e1h-7.13.21.0.fw and bnx2x-e2-7.13.21.0.fw * iwlwifi-firmware-iwl8260c: Updated iwlwifi-8000C-36.ucode * iwlwifi-firmware-iwl8265: Updated iwlwifi-8265-36.ucode * iwlwifi-firmware-iwl9000: Updated iwlwifi-9000-pu-b0-jf-b0-46.ucode * iwlwifi-firmware-iwl9260: Updated iwlwifi-9260-th-b0-jf-b0-46.ucode * r8169-firmware: Updated rtl8153c-1.fw * rtl8723bs-firmware: removed * rtl8723bu-firmware: Added rtlwifi/rtl8723bs_nic.bin symlink * rtl8822ce-firmware: Updated rtw8822c_fw.bin Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: mac80211: refresh patchsetNick Hainke2021-12-241-5/+5
| | | | | | | Refreshed: - 311-mac80211-use-coarse-boottime-for-airtime-fairness-co.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: ath10k: provide a build variant for small RAM devicesNick Hainke2021-12-243-4/+82
| | | | | | | | | | | | | | | | | | | | | | | Based on: 1ac627024de9 ("kernel: ath10k-ct: provide a build variant for small RAM devices") Like described in the ath10k-ct-smallbuffers version, oom-killer gets triggered frequently by devices with small RAM. That change is necessary for many community mesh networks which use ath10k based devices with too little RAM. The -ct driver has been proven unstable if used with 11s meshing and only wave2 chipsets are supporting 11s. Freifunk Berlin is nowadays assembling its firmware-based completely of vanilla OpenWRT with some package additions which are made through the imagebuilder. Therefore we cannot take the approach other freifunk communities have taken to maintain that patch downstream [1]. Other communities consider these devices as broken and that change would pretty much give those devices a second life [2]. [1] - https://git.freifunk-franken.de/mirror/openwrt/commit/450b306e540bc0f2c8a8841bbe4d9612f2b8cdea [2] - https://github.com/freifunk-gluon/gluon/issues/1988#issuecomment-619532909 Signed-off-by: Simon Polack <spolack+git@mailbox.org> Signed-off-by: Nick Hainke <vincent@systemli.org>
* arm-trusted-firmware-bcm63xx: add ATF for Broadcom devicesRafał Miłecki2021-12-241-0/+42
| | | | | | | Right now it includes bcm4908 variant only that is required by BCM4908 family devices with U-Boot. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* hostapd: only attempt to set qos map if supported by the driverFelix Fietkau2021-12-231-0/+12
| | | | | | Fixes issues with brcmfmac Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: keep HE capability after channel switch in AP+STA/MeshArnout Vandecappelle (Essensium/Mind)2021-12-211-1/+2
| | | | | | | The auto-ht option already kept HT and VHT support, but wasn't updated to support HE (11ax). Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* qoriq: add support for WatchGuard Firebox M300Stijn Tintel2021-12-211-0/+19
| | | | | | | | | | | | | | | | | | | | | | | This device is based on NXP's QorIQ T2081QDS board, with a quad-core dual-threaded 1.5 GHz ppc64 CPU and 4GB ECC RAM. The board has 5 ethernet interfaces, of which 3 are connected to the ethernet ports on the front panel. The other 2 are internally connected to a Marvell 88E6171 switch; the other 5 ports of this switch are also connected to the ethernet ports on the front panel. Installation: write the sdcard image to an SD card. Stock U-Boot will not boot, wait for it to fail then run these commands: setenv OpenWrt_fdt image-watchguard-firebox-m300.dtb setenv OpenWrt_kernel watchguard_firebox-m300-kernel.bin setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; ext2load mmc 0:1 $fdtaddr $OpenWrt_fdt; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr - $fdtaddr' saveenv reset The default U-Boot boot entry will now boot OpenWrt from the SD card. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
* qoriq: new targetStijn Tintel2021-12-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Add a new target named "qoriq", that will support boards using PowerPC processors from NXP's QorIQ brand. This doesn't actually add support for any board yet, so that installation instructions can go in the commit message of the commit that adds actual support for a board. Using CONFIG_E6500_CPU here due to the kernel using -mcpu=powerpc64 rather than -mcpu=e5500 when selecting CONFIG_E5500_CPU. The only difference between e5500 and e6500 is AltiVec support, and the kernel checks for it at runtime. Musl will only check at runtime if AltiVec support is disabled at compile-time, so we need to use e5500 in CPU_TYPE to avoid SIGILL. Math emulation (CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED) is required, as neither e5500 nor e6500 implement fsqrt nor fsqrts, and musl hardcodes sqrt and sqrtf to use these ASM instructions on PowerPC64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 11:04:56 +0000