aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* qoriq: add support for WatchGuard Firebox M300Stijn Tintel2021-12-211-0/+19
| | | | | | | | | | | | | | | | | | | | | | | This device is based on NXP's QorIQ T2081QDS board, with a quad-core dual-threaded 1.5 GHz ppc64 CPU and 4GB ECC RAM. The board has 5 ethernet interfaces, of which 3 are connected to the ethernet ports on the front panel. The other 2 are internally connected to a Marvell 88E6171 switch; the other 5 ports of this switch are also connected to the ethernet ports on the front panel. Installation: write the sdcard image to an SD card. Stock U-Boot will not boot, wait for it to fail then run these commands: setenv OpenWrt_fdt image-watchguard-firebox-m300.dtb setenv OpenWrt_kernel watchguard_firebox-m300-kernel.bin setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; ext2load mmc 0:1 $fdtaddr $OpenWrt_fdt; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr - $fdtaddr' saveenv reset The default U-Boot boot entry will now boot OpenWrt from the SD card. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
* qoriq: new targetStijn Tintel2021-12-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Add a new target named "qoriq", that will support boards using PowerPC processors from NXP's QorIQ brand. This doesn't actually add support for any board yet, so that installation instructions can go in the commit message of the commit that adds actual support for a board. Using CONFIG_E6500_CPU here due to the kernel using -mcpu=powerpc64 rather than -mcpu=e5500 when selecting CONFIG_E5500_CPU. The only difference between e5500 and e6500 is AltiVec support, and the kernel checks for it at runtime. Musl will only check at runtime if AltiVec support is disabled at compile-time, so we need to use e5500 in CPU_TYPE to avoid SIGILL. Math emulation (CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED) is required, as neither e5500 nor e6500 implement fsqrt nor fsqrts, and musl hardcodes sqrt and sqrtf to use these ASM instructions on PowerPC64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
* libunwind: add ppc64 supportStijn Tintel2021-12-212-2/+31
| | | | | | | | Backport an upstream patch to make libunwind build on ppc64, and add powerpc64 to the dependencies. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
* nettle: disable assembler on ppc64Stijn Tintel2021-12-211-1/+2
| | | | | | | | | | | | As of version 3.7, Nettle added PowerPC64 assembly for several algorithms. Unfortunately, they cause build to fail due to ABI mismatch: gcm-hash.o: ABI version 1 is not compatible with ABI version 2 output Disable assembler when ppc64 and musl are used for now. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
* openssl: add ppc64 supportStijn Tintel2021-12-213-2/+69
| | | | | | | | | | | | | | Backport an upstream patch that adds support for ELFv2 ABI on big endian ppc64. As musl only supports ELFv2 ABI on ppc64 regardless of endianness, this is required to be able to build OpenSSL for ppc64be. Modify our targets patch to add linux-powerpc64-openwrt, which will use the linux64v2 perlasm scheme. This will probably break the combination ppc64 with glibc, but as we really only want to support musl, this shouldn't be a problem. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mt76: fix Makefile dependencies for mt7921Lorenzo Bianconi2021-12-211-3/+4
| | | | Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
* kernel: drop obsolete kmod-video-core dependenciesStijn Tintel2021-12-201-1/+1
| | | | | | These dependencies do not exist in any of the supported kernel versions. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: drop obsolete symbols from kmod-video-coreStijn Tintel2021-12-201-7/+1
| | | | | | These symbols don't exist in any of the supported kernel versions. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* procd: update to git HEADDaniel Golle2021-12-202-17/+3
| | | | | | | | eb522fc uxc: consider uvol and etc location for configurations 16a6ee9 uxc: integrate console into uxc 129d050 remove ujail-console Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: make OpenWrt statistics per-BSSDavid Bauer2021-12-202-20/+20
| | | | | | | WNM and RRM statistics were incorrectly per-PHY, leading to shared statistic counters per BSS. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: provide BSS-transition-queries to ubus subscribersDavid Bauer2021-12-202-10/+69
| | | | | | | | | | | | | | | Provide incoming BSS transition queries to ubus subscribers. This allows external steering daemons to provide clients with an optimal list of transition candidates. This commit has no functional state in case no ubus subscriber is present or it does not handle this ubus message. To prevent hostapd from sending out a generic response by itself, a subscribing daemon has to return a non-zero response code to hostapd. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: WNM: allow specifying dialog-tokenDavid Bauer2021-12-202-4/+110
| | | | | | | | | | Backport a patch to allow extending the ubus BSS-transition method for specifying individual dialog tokens for BSS transition management requests. This is required for handling BSS transition queries in the future. Signed-off-by: David Bauer <mail@david-bauer.net>
* odhcp6c: update to latest git HEADHans Dedecker2021-12-171-3/+3
| | | | | | | | 39b584b Revert "dhcpv6: add a minimum valid lifetime for IA_PD updates" c9578e1 dhcpv6: add support for null IA_PD valid lifetime ca43ea3 dhcpv6: add a minimum valid lifetime for IA_PD updates Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: update to latest git HEADHans Dedecker2021-12-171-3/+3
| | | | | | | | | 5ca5e0b netifd: allow disabling rule/rule6 config sections 8875960 interface-ip: add support for IPv6 prefix invalidation e589c05 interface-ip: use metric when looking for a route b54ffde main: fix hotplug script usage message Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: optimize airtime fairness code to reduce cpu usageFelix Fietkau2021-12-171-0/+60
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: close correct blobmsg tableDavid Bauer2021-12-161-1/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add OpenWrt specific statistic countersDavid Bauer2021-12-152-1/+105
| | | | | | | | | | This adds a new struct for storing statistics not (yet) tracked by hostapd regarding RRM and WNM activity. These statistics can be read using the get_status hostapd interface ubus method. Signed-off-by: David Bauer <mail@david-bauer.net>
* iw: Update to version 5.16Hauke Mehrtens2021-12-144-367/+260
| | | | | | | | | | | Revert a commit to allow providing CFLAGS and LIBS from OpenWrt package Makefile. This downgrades the nl80211.h to kernel 5.15 and removes FILS_CRYPTO_OFFLOAD. This is needed to make it compatible with our patched mac80211 from kernel 5.15 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* libnl-tiny: update to the latest versionHauke Mehrtens2021-12-141-4/+4
| | | | | | 8e0555f attr.h: Add NLA_PUT_S32 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.15.8Hauke Mehrtens2021-12-1419-390/+29
| | | | | | | | | | | | | The following patches were backported from upstream before and are not needed any more: package/kernel/mac80211/patches/ath10k/081-ath10k-fix-module-load-regression-with-iram-recovery-feature.patch package/kernel/mac80211/patches/ath10k/980-ath10k-fix-max-antenna-gain-unit.patch package/kernel/mac80211/patches/build/010-headers-Add-devm_platform_get_and_ioremap_resource.patch package/kernel/mac80211/patches/subsys/300-mac80211-drop-check-for-DONT_REORDER-in-__ieee80211_.patch package/kernel/mac80211/patches/subsys/307-mac80211-do-not-access-the-IV-when-it-was-stripped.patch package/kernel/mac80211/patches/subsys/308-mac80211-fix-radiotap-header-generation.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ls-ddr-phy: bump to LSDK-21.08Martin Schiller2021-12-131-3/+3
| | | | | | Update ls-ddr-phy to latest LSDK-21.08. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* restool: bump to LSDK-21.08Martin Schiller2021-12-131-3/+3
| | | | | | Update restool to latest LSDK-21.08. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ls-dpl: bump to LSDK-21.08Martin Schiller2021-12-131-9/+9
| | | | | | Update ls-dpl to latest LSDK-21.08. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ls-mc: bump to LSDK-21.08Martin Schiller2021-12-131-6/+6
| | | | | | Update ls-mc to latest LSDK-21.08. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ppfe-firmware: bump to LSDK-21.08Martin Schiller2021-12-131-4/+4
| | | | | | | | Update ppfe-firmware to latest LSDK-21.08. Switched to AUTORELEASE for simplicity. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* fman-ucode: bump to LSDK-21.08Martin Schiller2021-12-131-4/+4
| | | | | | | | | Just update PKG_VERSION/PKG_MIRROR_HASH since fman-ucode of LSDK-21.08 had no changes. Switched to AUTORELEASE for simplicity. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* tfa-layerscape: bump to LSDK-21.08Martin Schiller2021-12-134-56/+60
| | | | | | Update tfa package to latest LSDK-21.08. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* uboot-layerscape: bump to LSDK-21.08Martin Schiller2021-12-1321-49/+87
| | | | | | | | | | | | | Update layerscape u-boot package to LSDK-21.08 and drop patches which are no longer needed. The new env variable 'fsl_bootcmd_mcinitcmd_set' is needed to protect the configured bootcmd and mc_init values. See [1] for more informations. [1] https://source.denx.de/u-boot/u-boot/-/commit/b62c174e861bddc3c7131045ed018556645cecb9 Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ls-rcw: bump to LSDK-21.08Martin Schiller2021-12-132-38/+3
| | | | | | | Update ls-rcw to latest LSDK-21.08. Drop patch 0001 since it had been integrated. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* otrx: update to the latest masterRafał Miłecki2021-12-131-3/+3
| | | | | | | | | | | 56e8e19 otrx: support TRX from stdin when extracting a37ccaf otrx: support unsorted partitions offsets 1fa145e otrx: extract shared code opening & parsing TRX format 4ecefda otrx: allow validating TRX from stdin cf01e69 otrx: avoid unneeded fseek() when calculating CRC32 Fixes: 80041dea7094 ("bcm53xx: sysupgrade: refactor handling different firmware formats") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* dtc: support printing binary data with fdtgetRafał Miłecki2021-12-131-0/+137
| | | | | | | It's needed for extracting binary images. Cc: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* dtc: import package for dtc & fdt from packages feedRafał Miłecki2021-12-131-0/+93
| | | | | | | | | | | | | | | fdt* utils are needed by targets that use U-Boot FIT images for sysupgrade. It includes all recent BCM4908 SoC routers as Broadcom switched from CFE to U-Boot. fdtget is required for extracting images (bootfs & rootfs) from Broadcom's ITB. Extracted images can be then flashed to UBI volumes. sysupgrade is core functionality so it needs dtc as part of base code base. Cc: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* procd: update to git HEADDaniel Golle2021-12-111-3/+3
| | | | | | bb95fe8 jail: make sure jailed process is terminated Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* rtl8812au-ct: update driver to be ready for 5.15Janpieter Sollie2021-12-111-3/+3
| | | | | | | | update rtl8812au-ct driver to be ready for 5.15 Linux. Signed-off-by: Janpieter Sollie <janpieter.sollie@edpnet.be> [added commit message from PR with changes, added tag to subject] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* hostapd: add support for specifying the FILS DHCP serverFelix Fietkau2021-12-103-1/+18
| | | | | | | | The 'fils_dhcp' option can be set to '*' in order to autodetect the DHCP server For proto=dhcp networks, the discovered dhcp server will be used For all other networks, udhcpc is called to discover the address Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: on dhcp interfaces, store the dhcp server in interface dataFelix Fietkau2021-12-101-0/+1
| | | | | | | | Among other things, this can be used to auto-configure the DHCP server address for wireless APs using FILS, if the bridged interface is configured to DHCP Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for enabling FILS on AP and client interfacesFelix Fietkau2021-12-101-4/+37
| | | | | | This is only supported with WPA-enterprise Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: enable FILS support in the full config and add build feature discoveryFelix Fietkau2021-12-109-18/+42
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add kmod-video-gspca-sq930xJosef Schlehofer2021-12-051-0/+15
| | | | | | | | This module adds support for USB WebCams, which uses SQ930X chip [1]. [1] https://cateee.net/lkddb/web-lkddb/USB_GSPCA_SQ930X.html Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* kernel: btrfs: enable ACLJosef Schlehofer2021-12-051-1/+0
| | | | | | | | | | | | | | | | | By default CONFIG_BTRFS_FS_POSIX_ACL is disabled, it should be enabled only when you enable CONFIG_FS_POSIX_ACL. Right now, when you enable CONFIG_FS_POSIX_ACL it will enable CONFIG_BTRFS_FS_POSIX_ACL, but it will be disabled once you install kmod-btrfs. This should prevent it. Btrfs has enabled by default ACL for mount option. More details: https://cateee.net/lkddb/web-lkddb/BTRFS_FS_POSIX_ACL.html https://btrfs.wiki.kernel.org/index.php/Manpage/btrfs(5) Signed-off-by: Josef Schlehofer <josef.schlehofer@nic.cz>
* nat46: update to latest git HEADHans Dedecker2021-12-051-3/+3
| | | | | | | d9bc161 nat46-core: Fix typo since day one (#31) 840e235 Fix coverity issues observed so far (#30) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* base-files: fix service_running checkFlorian Eckert2021-12-041-3/+3
| | | | | | | | | | | | | | | | | | The following command checks if a instance of a service is running. /etc/init.d/<service> running <instance> In the variable `$@`, which is passed to the function `service_running`, the first argument is always the `instance` which should be checked. Because all other variables where removed from `$@` with `shift`. Before this change the first argument of `$@` was set to the `$service` Variable. So the function does not work as expected. The `$service` variable was always the instance which should be checked. This is not what we want. Signed-off-by: Florian Eckert <fe@dev.tdt.de> Reviewed-by: Sungbo Eo <mans0n@gorani.run>
* firmware: intel-microcode: update to 20210608Tan Zien2021-12-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | intel-microcode (3.20210608.2) * Correct INTEL-SA-00442 CVE id to CVE-2020-24489 in changelog and debian/changelog (3.20210608.1). intel-microcode (3.20210608.1) * New upstream microcode datafile 20210608 (closes: #989615) * Implements mitigations for CVE-2020-24511 CVE-2020-24512 (INTEL-SA-00464), information leakage through shared resources, and timing discrepancy sidechannels * Implements mitigations for CVE-2020-24513 (INTEL-SA-00465), Domain-bypass transient execution vulnerability in some Intel Atom Processors, affects Intel SGX. * Implements mitigations for CVE-2020-24489 (INTEL-SA-00442), Intel VT-d privilege escalation * Fixes critical errata on several processors * New Microcodes: sig 0x00050655, pf_mask 0xb7, 2018-11-16, rev 0x3000010, size 47104 sig 0x000606a5, pf_mask 0x87, 2021-03-08, rev 0xc0002f0, size 283648 sig 0x000606a6, pf_mask 0x87, 2021-04-25, rev 0xd0002a0, size 283648 sig 0x00080664, pf_mask 0x01, 2021-02-17, rev 0xb00000f, size 130048 sig 0x00080665, pf_mask 0x01, 2021-02-17, rev 0xb00000f, size 130048 sig 0x000806c1, pf_mask 0x80, 2021-03-31, rev 0x0088, size 109568 sig 0x000806c2, pf_mask 0xc2, 2021-04-07, rev 0x0016, size 94208 sig 0x000806d1, pf_mask 0xc2, 2021-04-23, rev 0x002c, size 99328 sig 0x00090661, pf_mask 0x01, 2021-02-04, rev 0x0011, size 19456 sig 0x000906c0, pf_mask 0x01, 2021-03-23, rev 0x001d, size 19456 sig 0x000a0671, pf_mask 0x02, 2021-04-11, rev 0x0040, size 100352 * Updated Microcodes: sig 0x000306f2, pf_mask 0x6f, 2021-01-27, rev 0x0046, size 34816 sig 0x000306f4, pf_mask 0x80, 2021-02-05, rev 0x0019, size 19456 sig 0x000406e3, pf_mask 0xc0, 2021-01-25, rev 0x00ea, size 105472 sig 0x000406f1, pf_mask 0xef, 2021-02-06, rev 0xb00003e, size 31744 sig 0x00050653, pf_mask 0x97, 2021-03-08, rev 0x100015b, size 34816 sig 0x00050654, pf_mask 0xb7, 2021-03-08, rev 0x2006b06, size 36864 sig 0x00050656, pf_mask 0xbf, 2021-03-08, rev 0x4003102, size 30720 sig 0x00050657, pf_mask 0xbf, 2021-03-08, rev 0x5003102, size 30720 sig 0x0005065b, pf_mask 0xbf, 2021-04-23, rev 0x7002302, size 27648 sig 0x00050663, pf_mask 0x10, 2021-02-04, rev 0x700001b, size 24576 sig 0x00050664, pf_mask 0x10, 2021-02-04, rev 0xf000019, size 24576 sig 0x00050665, pf_mask 0x10, 2021-02-04, rev 0xe000012, size 19456 sig 0x000506c9, pf_mask 0x03, 2020-10-23, rev 0x0044, size 17408 sig 0x000506ca, pf_mask 0x03, 2020-10-23, rev 0x0020, size 15360 sig 0x000506e3, pf_mask 0x36, 2021-01-25, rev 0x00ea, size 105472 sig 0x000506f1, pf_mask 0x01, 2020-10-23, rev 0x0034, size 11264 sig 0x000706a1, pf_mask 0x01, 2020-10-23, rev 0x0036, size 74752 sig 0x000706a8, pf_mask 0x01, 2020-10-23, rev 0x001a, size 75776 sig 0x000706e5, pf_mask 0x80, 2020-11-01, rev 0x00a6, size 110592 sig 0x000806a1, pf_mask 0x10, 2020-11-06, rev 0x002a, size 32768 sig 0x000806e9, pf_mask 0x10, 2021-01-05, rev 0x00ea, size 104448 sig 0x000806e9, pf_mask 0xc0, 2021-01-05, rev 0x00ea, size 104448 sig 0x000806ea, pf_mask 0xc0, 2021-01-06, rev 0x00ea, size 103424 sig 0x000806eb, pf_mask 0xd0, 2021-01-05, rev 0x00ea, size 104448 sig 0x000806ec, pf_mask 0x94, 2021-01-05, rev 0x00ea, size 104448 sig 0x000906e9, pf_mask 0x2a, 2021-01-05, rev 0x00ea, size 104448 sig 0x000906ea, pf_mask 0x22, 2021-01-05, rev 0x00ea, size 102400 sig 0x000906eb, pf_mask 0x02, 2021-01-05, rev 0x00ea, size 104448 sig 0x000906ec, pf_mask 0x22, 2021-01-05, rev 0x00ea, size 103424 sig 0x000906ed, pf_mask 0x22, 2021-01-05, rev 0x00ea, size 103424 sig 0x000a0652, pf_mask 0x20, 2021-02-07, rev 0x00ea, size 93184 sig 0x000a0653, pf_mask 0x22, 2021-03-08, rev 0x00ea, size 94208 sig 0x000a0655, pf_mask 0x22, 2021-03-08, rev 0x00ec, size 94208 sig 0x000a0660, pf_mask 0x80, 2020-12-08, rev 0x00e8, size 94208 sig 0x000a0661, pf_mask 0x80, 2021-02-07, rev 0x00ea, size 93184 * source: update symlinks to reflect id of the latest release, 20210608 intel-microcode (3.20210216.1) * New upstream microcode datafile 20210216 * Mitigates an issue on Skylake Server (H0/M0/U0), Xeon-D 21xx, and Cascade Lake Server (B0/B1) when using an active JTAG agent like In Target Probe (ITP), Direct Connect Interface (DCI) or a Baseboard Management Controller (BMC) to take the CPU JTAG/TAP out of reset and then returning it to reset. * This issue is related to the INTEL-SA-00381 mitigation. * Updated Microcodes: sig 0x00050654, pf_mask 0xb7, 2020-12-31, rev 0x2006a0a, size 36864 sig 0x00050656, pf_mask 0xbf, 2020-12-31, rev 0x4003006, size 53248 sig 0x00050657, pf_mask 0xbf, 2020-12-31, rev 0x5003006, size 53248 * source: update symlinks to reflect id of the latest release, 20210216 intel-microcode (3.20201118.1) * New upstream microcode datafile 20201118 * Removes a faulty microcode update from release 2020-11-10 for Tiger Lake processors. Note that Debian already had removed this specific falty microcode update on the 3.20201110.1 release * Add a microcode update for the Pentium Silver N/J5xxx and Celeron N/J4xxx which didn't make it to release 20201110, fixing security issues (INTEL-SA-00381, INTEL-SA-00389) * Updated Microcodes: sig 0x000706a1, pf_mask 0x01, 2020-06-09, rev 0x0034, size 74752 * Removed Microcodes: sig 0x000806c1, pf_mask 0x80, 2020-10-02, rev 0x0068, size 107520 intel-microcode (3.20201110.1) * New upstream microcode datafile 20201110 (closes: #974533) * Implements mitigation for CVE-2020-8696 and CVE-2020-8698, aka INTEL-SA-00381: AVX register information leakage; Fast-Forward store predictor information leakage * Implements mitigation for CVE-2020-8695, Intel SGX information disclosure via RAPL, aka INTEL-SA-00389 * Fixes critical errata on several processor models * Reintroduces SRBDS mitigations(CVE-2020-0543, INTEL-SA-00320) for Skylake-U/Y, Skylake Xeon E3 * New Microcodes sig 0x0005065b, pf_mask 0xbf, 2020-08-20, rev 0x700001e, size 27648 sig 0x000806a1, pf_mask 0x10, 2020-06-26, rev 0x0028, size 32768 sig 0x000806c1, pf_mask 0x80, 2020-10-02, rev 0x0068, size 107520 sig 0x000a0652, pf_mask 0x20, 2020-07-08, rev 0x00e0, size 93184 sig 0x000a0653, pf_mask 0x22, 2020-07-08, rev 0x00e0, size 94208 sig 0x000a0655, pf_mask 0x22, 2020-07-08, rev 0x00e0, size 93184 sig 0x000a0661, pf_mask 0x80, 2020-07-02, rev 0x00e0, size 93184 * Updated Microcodes sig 0x000306f2, pf_mask 0x6f, 2020-05-27, rev 0x0044, size 34816 sig 0x000406e3, pf_mask 0xc0, 2020-07-14, rev 0x00e2, size 105472 sig 0x00050653, pf_mask 0x97, 2020-06-18, rev 0x1000159, size 33792 sig 0x00050654, pf_mask 0xb7, 2020-06-16, rev 0x2006a08, size 35840 sig 0x00050656, pf_mask 0xbf, 2020-06-18, rev 0x4003003, size 52224 sig 0x00050657, pf_mask 0xbf, 2020-06-18, rev 0x5003003, size 52224 sig 0x000506c9, pf_mask 0x03, 2020-02-27, rev 0x0040, size 17408 sig 0x000506ca, pf_mask 0x03, 2020-02-27, rev 0x001e, size 15360 sig 0x000506e3, pf_mask 0x36, 2020-07-14, rev 0x00e2, size 105472 sig 0x000706a8, pf_mask 0x01, 2020-06-09, rev 0x0018, size 75776 sig 0x000706e5, pf_mask 0x80, 2020-07-30, rev 0x00a0, size 109568 sig 0x000806e9, pf_mask 0x10, 2020-05-27, rev 0x00de, size 104448 sig 0x000806e9, pf_mask 0xc0, 2020-05-27, rev 0x00de, size 104448 sig 0x000806ea, pf_mask 0xc0, 2020-06-17, rev 0x00e0, size 104448 sig 0x000806eb, pf_mask 0xd0, 2020-06-03, rev 0x00de, size 104448 sig 0x000806ec, pf_mask 0x94, 2020-05-18, rev 0x00de, size 104448 sig 0x000906e9, pf_mask 0x2a, 2020-05-26, rev 0x00de, size 104448 sig 0x000906ea, pf_mask 0x22, 2020-05-25, rev 0x00de, size 103424 sig 0x000906eb, pf_mask 0x02, 2020-05-25, rev 0x00de, size 104448 sig 0x000906ec, pf_mask 0x22, 2020-06-03, rev 0x00de, size 103424 sig 0x000906ed, pf_mask 0x22, 2020-05-24, rev 0x00de, size 103424 sig 0x000a0660, pf_mask 0x80, 2020-07-08, rev 0x00e0, size 94208 * 0x806c1: remove the new Tiger Lake update: causes hang on cold/warm boot https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/issues/44 INTEL-SA-00381 AND INTEL-SA-00389 MITIGATIONS ARE THEREFORE NOT INSTALLED FOR 0x806c1 TIGER LAKE PROCESSORS by this package update. Contact your system vendor for a firmware update, or wait fo a possible fix in a future Intel microcode release. * source: update symlinks to reflect id of the latest release, 20201110 * source: ship new upstream documentation (security.md, releasenote.md) Signed-off-by: Tan Zien <nabsdh9@gmail.com> [used different .tar.xz source, but with the same content] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mt76: update to the latest versionFelix Fietkau2021-12-031-3/+3
| | | | | | | | | 71e08471ab56 mt76: eeprom: fix return code on corrected bit-flips 9a8fc6636d83 mt76: move sar_capa configuration in common code 7cdbea1dc82a mt76: only access ieee80211_hdr after mt76_insert_ccmp_hdr 678071ef7029 mt76: mt7615: clear mcu error interrupt status on mt7663 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq40xx: add support for GL.iNet GL-B2200TruongSinh Tran-Nguyen2021-12-024-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds supports for the GL-B2200 router. Specifications: - SOC: Qualcomm IPQ4019 ARM Quad-Core - RAM: 512 MiB - Flash: 16 MiB NOR - SPI0 - EMMC: 8GB EMMC - ETH: Qualcomm QCA8075 - WLAN1: Qualcomm Atheros QCA4019 2.4GHz 802.11b/g/n 2x2 - WLAN2: Qualcomm Atheros QCA4019 5GHz 802.11n/ac W2 2x2 - WLAN3: Qualcomm Atheros QCA9886 5GHz 802.11n/ac W2 2x2 - INPUT: Reset, WPS - LED: Power, Internet - UART1: On board pin header near to LED (3.3V, TX, RX, GND), 3.3V without pin - 115200 8N1 - UART2: On board with BLE module - SPI1: On board socket for Zigbee module Update firmware instructions: Please update the firmware via U-Boot web UI (by default at 192.168.1.1, following instructions found at https://docs.gl-inet.com/en/3/troubleshooting/debrick/). Normal sysupgrade, either via CLI or LuCI, is not possible from stock firmware. Please do use the *gl-b2200-squashfs-emmc.img file, gunzipping the produced *gl-b2200-squashfs-emmc.img.gz one first. What's working: - WiFi 2G, 5G - WPA2/WPA3 Not tested: - Bluetooth LE/Zigbee Credits goes to the original authors of this patch. V1->V2: - updates *arm-boot-add-dts-files.patch correctly (sorry, my mistake) - add uboot-envtools support V2->V3: - Li Zhang updated official patch to fix wrong MAC address on wlan0 (PCI) interface V3->V4: - wire up sysupgrade Signed-off-by: Li Zhang <li.zhang@gl-inet.com> [fix tab and trailing space, document what's working and what's not] Signed-off-by: TruongSinh Tran-Nguyen <i@truongsinh.pro> [rebase on top of master, address remaining comments] Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> [remove redundant check in platform.sh] Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: add eMMC sysupgrade supportEnrico Mioso2021-12-022-0/+72
| | | | | | | | | | | | | | | | | | | | | | | | | Adds generic support for sysupgrading on eMMC-based devices. Provide function emmc_do_upgrade and emmc_copy_config to be used in /lib/upgrade/platform.sh instead of redundantly implementing the same logic over and over again. Similar to generic sysupgrade on NAND, use environment variables CI_KERNPART, CI_ROOTPART and newly introduce CI_DATAPART to indicate GPT partition names to be used. On devices with more than one MMC block device, CI_ROOTDEV can be used to specify the MMC device for partition name lookups. Also allow to select block devices directly using EMMC_KERN_DEV, EMMC_ROOT_DEV and EMMC_DATA_DEV, as using GPT partition names is not always an option (e.g. when forced to use MBR). To easily handle writing kernel and rootfs make use of sysupgrade.tar format convention which is also already used for generic NAND support. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> CC: Li Zhang <li.zhang@gl-inet.com> CC: TruongSinh Tran-Nguyen <i@truongsinh.pro>
* mac80211: fix tx aggregation locking issueFelix Fietkau2021-12-021-0/+79
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix queue assignment of aggregation start requestsFelix Fietkau2021-12-021-0/+28
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-12-021-3/+3
| | | | | | | | | | | | | | | | | | | | | a6451fea5a3d mt76: mt7615: improve wmm index allocation 1911486414dc mt76: mt7915: improve wmm index allocation 7998a41d1321 mt76: clear sta powersave flag after notifying driver 664475574438 mt76: mt7603: introduce SAR support 5c0da39c940b mt76: mt7915: introduce SAR support 77fc6c439a32 mt76: mt7603: improve reliability of tx powersave filtering 094b3d800835 firmware: update mt7663 rebb firmware to 20200904171623 25237b19bcc1 mt76: eeprom: tolerate corrected bit-flips 1463cb4c6ac2 mt76: mt7921: fix boolreturn.cocci warning 586bad6020f7 mt76: mt7921: use correct iftype data on 6GHz cap init 8ec95c910425 mt76: mt7921s: fix bus hang with wrong privilege 688e30c7d854 firmware: update mt7921 firmware to version 20211014 6fad970893dd mt76: fix key pointer overwrite in mt7921s_write_txwi/mt7663_usb_sdio_write_txwi 95acf972750c mt76: fix 802.3 RX fail by hdr_trans 3f402b0cf6c0 mt76: mt7921s: fix possible kernel crash due to invalid Rx count 929a03a8d65d mt76: connac: fix last_chan configuration in mt76_connac_mcu_rate_txpower_band Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ca-certificates: fix python3-cryptography woes in certdata2pem.pyChristian Lamparter2021-12-011-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a revert of the upstream patch to Debian's ca-certificate commit 033d52259172 ("mozilla/certdata2pem.py: print a warning for expired certificates.") The reason is, that this change broke builds with the popular Ubuntu 20.04 LTS (focal) releases which are shipping with an older version of the python3-cryptography package that is not compatible. |Traceback (most recent call last): | File "certdata2pem.py", line 125, in <module> | cert = x509.load_der_x509_certificate(obj['CKA_VALUE']) |TypeError: load_der_x509_certificate() missing 1 required positional argument: 'backend' |make[5]: *** [Makefile:6: all] Error 1 ...or if the python3-cryptography was missing all together: |Traceback (most recent call last): | File "/certdata2pem.py", line 31, in <module> | from cryptography import x509 |ModuleNotFoundError: No module named 'cryptography' More concerns were raised by Jo-Philipp Wich: "We don't want the build to depend on the local system time anyway. Right now it seems to be just a warning but I could imagine that eventually certs are simply omitted of found to be expired at build time which would break reproducibility." Link: <https://github.com/openwrt/openwrt/commit/7c99085bd697> Reported-by: Chen Minqiang <ptpt52@gmail.com> Reported-by: Shane Synan <digitalcircuit36939@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 12:15:11 +0000