aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* at91: add support for sama5d27-wlsom1-ek boardClaudiu Beznea2021-10-242-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAMA5D27 WLSOM1-EK board. Hardware: - SIP: SAMA5D27C-LD2G-CU including SAMA5D27 MPU and 2Gbit LPDDR2-SDRAM - MMC: one standard SD card interface - Flash: 64 Mb serial quad I/O flash memory (SST26VF064BEUIT-104I/MF) with embedded EUI-48 and EUI-64 MAC addresses - USB: one USB device, one USB host one HSIC interface - Ethernet: 1x10/100Mbps port - WiFi/BT: IEEE 802.11 b/g/n Wi-Fi plus Bluetooth (Wi-Fi/BT) module (ATWILC3000-MR110UA) - Crypto: one ATECC608B-TNGTLS secure element - Video: one LCD RGB 18-bit interface, one ISC 12-bit camera interface - Debug port: one JTAG interface, one UART interface, one WILC UART interface - Leds: one RGB LED - Buttons: start, reset, wakeup, user buttons - Expansion: one tamper connector, one mikrobus interface, 2 XPRO PTC connector - Power managament: PMIC (MCP16502) Flashing: - follow procedure at [1] [1] https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d27WLSom1EKMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: add support for sama5d2 icp boardClaudiu Beznea2021-10-242-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAMA5D2 ICP board. Hardware: - SoC: SAMA5D27 - RAM: 512 MB DDR3L - MMC: One stanard SD card interface - USB: One USB host switch 4 ports with power switch, One USB device type Micro-AB - CAN: 2 interfaces - Ethernet: One Gigabit Ethernet PHY through HSIC, One ETH switchport, One EtherCAT interface - WiFi/BT: Footprint for IEEE 802.11 b/g/n Wi-Fi plus Bluetooth module (Wi-Fi/BT), suitable for Microchip WILC3000-MR110CA or WILC3000-MR110UA - Debug port: One J-Link-OB/J-Link-CDC, one JTAG interface - Leds: one RGB LED - Buttons: reset, wakeup, 2 user buttons - Expansion: one PIOBU/PIO connector, 3 mikrobus sockets - Power mangament: PMIC (MCP16502), one power consumption device (PAC1934) Not working in Linux: - EtherCAT interface: there is no Linux support integrated - PAC1934: driver available at [1] but not integrated in Linux Flashing: - follow the procedure at [2] [1] https://ww1.microchip.com/downloads/en/DeviceDoc/pac193x_linux_driver.zip [2] https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d2IcpMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* wolfssl: enable ECC Curve 25519 by defaultStan Grishin2021-10-241-1/+1
| | | | | | | * fixes https://github.com/openwrt/packages/issues/16652 see https://github.com/openwrt/packages/issues/16674#issuecomment-934983898 Signed-off-by: Stan Grishin <stangri@melmac.net>
* uclibc++: removeRosen Penev2021-10-247-398/+0
| | | | | | | | | | | | | | | No package here depends on it. Furthermore, uClibc++ is a fairly buggy C++ library and seems to be relatively inactive upstream. It also lacks proper support for modern C++11 features. The main benefit of it is size: 66.6 KB vs 287.3 KB on mips24kc. Static linking and LTO can help bring the size down of packages that need it. Added warning message to uclibc++.mk Signed-off-by: Rosen Penev <rosenp@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* u-boot.mk: always link host libraries staticAndre Heider2021-10-243-42/+0
| | | | | | | | Host libraries are only build static, so let's pass --static to pkg-config globally and remove the then unnecessary patches doing exactly that individually. Signed-off-by: Andre Heider <a.heider@gmail.com>
* u-boot.mk: fix pkg-config usageAndre Heider2021-10-244-8/+0
| | | | | | | | Using Host/Exports doesn't work as intended, explicitly add the required vars so that u-boot finds the required libraries when building its tools. Signed-off-by: Andre Heider <a.heider@gmail.com>
* mac80211: Add devm_platform_get_and_ioremap_resource()Hauke Mehrtens2021-10-241-0/+79
| | | | | | | | This function is missing in kernel 5.4, but it is sued by ath10k. This fixes the build of ath10k on some targets. Fixes: cfe0eb7485d8 ("mac80211: Update to version 5.14.13-1") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.15-rc6-1Hauke Mehrtens2021-10-2416-1773/+26
| | | | | | | | The removed patches were applied upstream. The Cisco Aironet 802.11b driver was removed from backports, remove it also from OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.14.13-1Hauke Mehrtens2021-10-2422-1916/+154
| | | | | | The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.13.19-1Hauke Mehrtens2021-10-2430-1100/+133
| | | | | | | | | The removed patches were applied upstream. of_get_mac_address() was backported in our OpenWrt kernel, remove the change from backports. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.12.19-1Hauke Mehrtens2021-10-2386-6099/+249
| | | | | | The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.11.22-1Hauke Mehrtens2021-10-2388-1995/+366
| | | | | | | | The removed patches were applied upstream. This backports version 5.11.22 and later does not support kernel versions < 4.4, this allows us to remove some patches too. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ethtool: update to v5.14Hans Dedecker2021-10-231-3/+3
| | | | | | Update to newly released version 5.14 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "ethtool: update to v5.14"Hans Dedecker2021-10-231-3/+3
| | | | | | This reverts commit 7630001427fa266fa61da0b2533e2c1054eababe Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ethtool: update to v5.14Hans Dedecker2021-10-231-3/+3
| | | | | | Update to newly released version 5.14 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* umdns: add missing syscall to seccomp filterMichael Peleshenko2021-10-231-0/+1
| | | | | | | The 'clock_gettime64', syscall is missing. Found with 'utrace /usr/sbin/umdns' on an R7800. Signed-off-by: Michael Peleshenko <mpeleshenko@gmail.com>
* wireless-regdb: update to version 2021.08.28Christian Lamparter2021-10-231-2/+2
| | | | | | | | | | | | e983a25 Update regulatory rules for Ecuador (EC) a0bcb88 wireless-regdb: Update regulatory rules for Norway (NO) on 6 and 60 GHz cdf854d wireless-regdb: Update regulatory rules for Germany (DE) on 6GHz 86cba52 wireless-regdb: reduce bandwidth for 5730-5850 and 5850-5895 MHz in US 6fa2384 wireless-regdb: remove PTMP-ONLY from 5850-5895 MHz for US 9839e1e wireless-regdb: recent FCC report and order allows 5850-5895 immediately 42dfaf4 wireless-regdb: update 5725-5850 MHz rule for GB Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files: chmod 1777 /var/lockDeomid Ryabkov2021-10-231-2/+3
| | | | | | | | | | | | | Per FHS 3.0, /var/lock is the location for lock files [1]. However its current permissions (755) are too restrictive for use by unprivileged processes. Debian and Ubuntu set them to 1777, and now so do we. [1] <https://refspecs.linuxfoundation.org/FHS_3.0/fhs-3.0.html#varlockLockFiles> Signed-off-by: Deomid Ryabkov <rojer@rojer.me> [fixed typo in commit message, had to remove "rojer" due to git hooks] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mt76: update to the latest versionFelix Fietkau2021-10-231-3/+3
| | | | | | f6bde7ba82ee mt76: connac: fix unresolved symbols when CONFIG_PM is unset Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-10-231-3/+3
| | | | | | | | | | | | | | | | | 9d288d7c0c73 mt76: mt7615: apply cached RF data for DBDC 4d2e81d9ecab mt76: mt7915: remove mt7915_mcu_add_he() 2c8c3bcd766c mt76: mt7915: rework .set_bitrate_mask() to support more options 577d45f6e4a0 mt76: mt7915: rework debugfs fixed-rate knob b68af355f707 mt76: mt7915: fix endiannes warning mt7915_mcu_beacon_check_caps b52adf981561 mt76: mt7915: add WA firmware log support ed3d8569c400 mt76: mt7915: add debugfs knobs for MCU utilization 0f49a22314a5 mt76: mt7921: disable 4addr capability 754d4a37ab71 mt76: mt7921: fix mt7921s Kconfig f81f42fe875f mt76: Print error message when reading EEPROM from mtd failed fd25a550965d mt76: Make use of the helper macro kthread_run() 1d01257662a6 wireless: mediatek: mt7921: fix Wformat build warning Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uci: update to git HEADHauke Mehrtens2021-10-221-3/+3
| | | | | | cmake: Allow override of install directories Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* procd: update to git HEADHauke Mehrtens2021-10-221-3/+3
| | | | | | jail: Fix build with glibc Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: ubus: fix uninitialized pointerDavid Bauer2021-10-211-1/+1
| | | | | | | This fixes passing a bogus non-null pointer to the ubus handler in case the transition request is rejected. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: fix up patches after the last commitFelix Fietkau2021-10-214-8/+8
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix a race condition on adding AP mode wds sta interfacesFelix Fietkau2021-10-212-1/+23
| | | | | | | | | | Both hostapd and netifd attempt to add a VLAN device to a bridge. Depending on which one wins the race, bridge vlan settings might be incomplete, or hostapd might run into an error and refuse to service the client. Fix this by preventing hostapd from adding interfaces to the bridge and instead rely entirely on netifd handling this properly Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2021-10-211-3/+3
| | | | | | | c61a1d432b34 wireless: fix creating AP mode WDS station interfaces f78bdec2ed5f wireless: fix handling vif attributes on reload with mode change Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ltq-vdsl-app: add error vector counters to the ubus metricsAndre Heider2021-10-211-0/+23
| | | | | | | | | | | | | | | These are useful stats to debug vector related line deteriorations, see [0]. Example output: "erb": { "sent": 169925, "discarded": 0 } [0] https://forum.openwrt.org/t/vectoring-on-lantiq-vrx200-vr9-missing-callback-for-sending-error-samples/104046 Signed-off-by: Andre Heider <a.heider@gmail.com>
* ltq-vdsl-app: prepare for multiple mei ioctlsAndre Heider2021-10-212-19/+23
| | | | | | | | | | | | Refactor so that the outer function opens and closes the mei fd and passes it around, just as with the main fd. That also allows us to use the IOCTL macro in get_vector_status() and clean up accordingly. Switch to AUTORELEASE while at it. Signed-off-by: Andre Heider <a.heider@gmail.com>
* ath10k-ct: update to version from 2021-09-22Andrew Robbins2021-10-213-10/+5
| | | | | | | | Add in a fix for 160Mhz dfs on 5.10 and higher. Add support for 5.13 and 5.15 kernels. Add of_get_mac_address support for 5.15 driver. Signed-off-by: Andrew Robbins <andrew@robbinsa.me>
* wolfssl: fix compile when enable-devcrypto is setIvan Pavlov2021-10-211-0/+22
| | | | | | | fixing linking error when --enable-devcrypto=yes fixes: 7d92bb050961 wolfssl: update to 4.8.1-stable Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
* iw: sync nl80211 with kernel backportsHauke Mehrtens2021-10-211-13/+56
| | | | | | | | The nl80211 was out of sync with the version used in our backports. This broke the configuration of the antenna gain. Fixes: 2bfac61483db ("mac80211: backport support for BSS color changes") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: add missing patch chunk for mac80211_hwsimFelix Fietkau2021-10-202-4/+42
| | | | | | Fixes build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-10-204-167/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ebf5b2336591 mt7615/mt7915: fix hwmon device name 8d12f9ed275d mt76: mt7615: mt7622: fix ibss and meshpoint e7883cdc0b4e mt76: mt7915: improve code readability in mt7915_mcu_sta_bfer_ht 831d5967abb9 wireless: fix spelling of A-MSDU in HE capabilities f09cb04be261 wireless: align some HE capabilities with the spec 0eeba8f2952d wireless: align HE capabilities A-MPDU Length Exponent Extension 655a6c65b8a7 mt76: mt7915: introduce mt7915_mcu_beacon_check_caps() 4440025d0ba9 mt76: mt7915: fix txbf starec TLV issues 87d2fb6fbff5 mt76: mt7915: improve starec readability of txbf 53c6a3cb7f6b mt76: mt7915: fix sta_rec_wtbl tag len f517845e4f28 mt76: mt7915: rework starec TLV tags 1df017bc39a3 mt76: mt7915: fix muar_idx in mt7915_mcu_alloc_sta_req() 6724b0a9a748 mt76: mt7915: set VTA bit in tx descriptor f1f505cbbb30 mt76: mt7915: set muru platform type 8c9d4b38d258 mt76: mt7915: remove dead code in mt7915_get_et_stats d0ccc4297935 mt76: rely on phy pointer in mt76_register_debugfs_fops routine signature 0af0af82bb97 mt76: mt7915: introduce mt76 debugfs sub-dir for ext-phy 10e85d62f213 mt76: mt7915: improve code readability for xmit-queue handler b6051f7713d2 mt76: sdio: export mt76s_alloc_rx_queue and mt76s_alloc_tx routines 9a97c38a309d mt76: mt7921: get rid of unused variable in mt7921_tx_complete_skb c02847c05884 mt76: mt7921: get rid of unused variable in mt7921_mac_tx_free 60dd47a0a62e mt76: mt7915: remove dead code in debugfs code ce74fc020d81 mt76: mt7921: add MU EDCA cmd support c062f6920356 mt76: mt7921: refactor mac.c to be bus independent bfa909c833e8 mt76: mt7921: refactor dma.c to be pcie specific 6556bddf26d2 mt76: mt7921: refactor mcu.c to be bus independent 1c8418207c86 mt76: mt7921: refactor init.c to be bus independent 6cf8248c1a44 mt76: mt7921: add MT7921_COMMON module 77600b0c10ac mt76: connac: move mcu reg access utility routines in mt76_connac_lib module 65362a00d07d mt76: mt7663s: rely on mcu reg access utility 956206bb55c3 mt76: mt7921: make all event parser reusable between mt7921s and mt7921e f0dedcf6aaf0 mt76: mt7921: use physical addr to unify register access 5079d5b0b13c mt76: sdio: move common code in mt76_sdio module 26257594398b mt76: sdio: introduce parse_irq callback e353424f1b07 mt76: sdio: extend sdio module to support CONNAC2 ddab3dd25f94 mt76: connac: extend mcu_get_nic_capability b2d9a1748a41 mt76: mt7921: rely on mcu_get_nic_capability e6ce5d9cbda0 mt76: mt7921: refactor mt7921_mcu_send_message ce3706a65ccd mt76: mt7921: introduce mt7921s support 3143118baf53 mt76: mt7921s: add reset support 645eac64bece mt76: mt76x0: correct VHT MCS 8/9 tx power eeprom offset d54796787cb7 mt76: move mt76_sta_stats in mt76.h 094e085abf5a mt76: move mt76_ethtool_worker_info in mt76 module f80ab6dde63d mt76: mt7915: run mt7915_get_et_stats holding mt76 mutex 4a11cb67dc27 mt76: mt7915: move tx amsdu stats in mib_stats 486da6fa2512 mt76: do not reset MIB counters in get_stats callback d8837b7c8dcd mt76: mt7921: add some more MIB counters 5ffe086fcd1b mt76: mt7921: introduce stats reporting through ethtool 69154ae23f6b mt76: mt7921: add sta stats accounting in mt7921_mac_add_txs_skb 4b65fbc4e203 mt76: mt7921: move tx amsdu stats in mib_stats 35b8025f466b mt76: mt7921: add per-vif counters in ethtool cfbbd861eb12 mt76: mt7915: enable HE UL MU-MIMO a0b94987df80 mt76: mt7915: rework mt7915_mcu_sta_muru_tlv() 5fbb686e9c0c mt76: mt7915: fix missing HE phy cap b649678c18ca mt76: mt7915: change max rx len limit of hw modules Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport a few trivial patchesFelix Fietkau2021-10-206-0/+579
| | | | | | | No functional changes, just some renames to make it easier to keep mt76 in sync with upstream Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ncurses: add tmux terminfoJitao Lu2021-10-191-1/+3
| | | | | | | | | | They're preferred terminal descriptions for tmux, with additional support to some special characters and italic fonts. More info can be found at: https://github.com/tmux/tmux/wiki/FAQ Fixes: FS#3404 Signed-off-by: Jitao Lu <dianlujitao@gmail.com>
* hostapd: fix goto loop for ubus assoc handlerDavid Bauer2021-10-191-8/+7
| | | | | | | | | | When a ubus event handler denies a association with a non-zero return value, the code jumps to preceeding code, creating an endless loop until the event handler accepts the assc request. Move the ubus handler further up the code to avoid creating such a loop. Signed-off-by: David Bauer <mail@david-bauer.net>
* wireguard-tools: add uci option to disable wireguard peersStepan Henek2021-10-183-1/+16
| | | | | | | | | | | | | Right now when I want to temporarily disable wg peer I need to delete the entire peer section. This is not such a good solution because I loose the previous configuration of the peer. This patch adds `disabled` option to peer config which causes that the config section is ignored. Signed-off-by: Stepan Henek <stepan.henek@nic.cz> [use $(AUTORELEASE)] Signed-off-by: Paul Spooren <mail@aparcar.org>
* nftables: bump to 1.0.0Stijn Tintel2021-10-191-3/+3
| | | | | | | | This introduces support for hardware flow offloading, which was added in in nftables 0.9.9. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Jo-Philipp Wich <jo@mein.io>
* procd: update to git HEADDaniel Golle2021-10-171-3/+3
| | | | | | | | | 9b1e035 jail: netifd: code cosmetics d2a2ecc jail: netifd: fix error handling issue reported by coverity e1d7cee jail: netifd: check target netns fd before using it 59f7699 uxc: add missing 'break' statement Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* wolfssl: remove --enable-sha512 configure switchAndre Heider2021-10-171-2/+2
| | | | | | | | | | It's the default anyway and this just looks confusing, as if it wasn't. Switch to AUTORELEASE while at it. The binary size is unchanged. Signed-off-by: Andre Heider <a.heider@gmail.com>
* wolfssl: always build with --enable-reproducible-buildAndre Heider2021-10-171-0/+1
| | | | | | | | | | | This gates out anything that might introduce semantically frivolous jitter, maximizing chance of identical object files. The binary size shrinks by 8kb: 1244352 staging_dir/target-mipsel_24kc_musl/usr/lib/libwolfssl.so.4.8.1.39c36f2f 1236160 staging_dir/target-mipsel_24kc_musl/usr/lib/libwolfssl.so.4.8.1.39c36f2f Signed-off-by: Andre Heider <a.heider@gmail.com>
* wolfssl: build with WOLFSSL_ALT_CERT_CHAINSAndre Heider2021-10-171-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | "Alternate certification chains, as oppossed to requiring full chain validataion. Certificate validation behavior is relaxed, similar to openssl and browsers. Only the peer certificate must validate to a trusted certificate. Without this, all certificates sent by a peer must be used in the trust chain or the connection will be rejected." This fixes e.g. uclient-fetch and curl connecting to servers using a Let's Encrypt certificate which are cross-signed by the now expired DST Root CA X3, see [0]. This is the recommended solution from upstream [1]. The binary size increases by ~12.3kb: 1236160 staging_dir/target-mipsel_24kc_musl/usr/lib/libwolfssl.so.4.8.1.39c36f2f 1248704 staging_dir/target-mipsel_24kc_musl/usr/lib/libwolfssl.so.4.8.1.39c36f2f [0] https://github.com/openwrt/packages/issues/16674 [1] https://github.com/wolfSSL/wolfssl/issues/4443#issuecomment-934926793 Signed-off-by: Andre Heider <a.heider@gmail.com> [bump PKG_RELEASE] Signed-off-by: David Bauer <mail@david-bauer.net>
* buildsystem: add CONFIG_SECCOMPFlorian Eckert2021-10-161-2/+1
| | | | | | | | | | | | | | | | | | | | | Until now, this feature was switched on via the kernel configuration option KERNEL_SECCOMP. The follwing change a7f794cd2aa104fdbd4c6e38f9b76373bf9b96e1 now requires that the package procd-seccomp must also enabled for buildinmg. However, this is not the case we have no dependency and the imagebuilder cannot build the image, because of the implicit package selection. This change adds a new configuration option CONFIG_SECCOMP. The new option has the same behaviour as the configuration option CONFIG_SELINUX. If the CONFIG_SECCOMP is selected then the package procd-seccomp and KERNEL_SECCOMP is enabled for this build. Signed-off-by: Florian Eckert <fe@dev.tdt.de> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: ubus: add BSS transtiton request methodDavid Bauer2021-10-131-40/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | The existing wnm_disassoc_imminent ubus method only supports issuing a bss transition request with the disassoc imminent flag set. For use-cases, where the client is requested to roam to another BSS without a pending disassoc, this existing method is not suitable. Add a new bss_transition_request ubus method, which provides a more universal way to dispatch a transition request. It takes the following arguments: Required: addr: String - MAC-address of the STA to send the request to (colon-seperated) Optional: abridged - Bool - Indicates if the abridged flag is set disassociation_imminent: Bool - Whether or not the disassoc_imminent flag is set disassociation_timer: I32 - number of TBTTs after which the client will be disassociated validity_period: I32 - number of TBTTs after which the beacon candidate list (if included) will be invalid neighbors: blob-array - Array of strings containing neighbor reports as hex-string Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: ubus: add notification for BSS transition responseDavid Bauer2021-10-133-0/+74
| | | | | | | | | To allow steering daemons to be aware of the STA-decided transition target, publish WNM transition responses to ubus. This way, steerings daemons can learn about STA-chosen targets and send a better selection of transition candidates. Signed-off-by: David Bauer <mail@david-bauer.net>
* procd: update to git HEADDaniel Golle2021-10-131-4/+4
| | | | | | | | | | | | | | 97bcdcf uxc: fix segfault caused by use-after-free 6398e05 uxc: don't free the stack 324ebd0 jail: fs: add support for asymmetric mount bind c44ab7f jail: netifd: generate netifd uci config and mount it 82dd390 jail: make use of per-container netifd via ubus The new per-jail netifd is now configured by filtering the host network configuration. As libuci is used for that, procd-ujail now depends on libuci. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* netifd: update to git HEADDaniel Golle2021-10-131-3/+3
| | | | | | | be8cd8f interface: don't fork() to start jail interface 7a048bd interface, ubus: rework netns up/down Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt76: update to the latest versionFelix Fietkau2021-10-121-3/+3
| | | | | | 83598c2e872f mt76: avoid possible infinite loop in mt76_tx_status_check Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-10-111-2/+2
| | | | | | 1af0242d1241 mt76: mt7915: replace a 64 bit divsion with a call to div_u64_rem Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove kcov bits from TWT backport patchFelix Fietkau2021-10-111-5/+1
| | | | | | | Our backports version does not have support for kcov in mac80211 Fixes build errors on some platforms Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-02 17:44:05 +0000