aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* base-files/functions.sh: use command -v instead of whichRosen Penev2020-07-111-2/+2
| | | | | | | | which must be executed. command -v is a shell builtin. https://github.com/koalaman/shellcheck/wiki/SC2230 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: kmod-zram: break the strict dependency from lz4Rui Salvaterra2020-07-112-4/+2
| | | | | | | | Zram is only strictly dependent on lzo, not lz4. Break this dependency and make the lz4 module visible in the configuration, in order for the user to have the choice of enabling/disabling it, if (s)he sees fit. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* zram-swap: correctly express the required dependenciesRui Salvaterra2020-07-111-1/+1
| | | | | | | | The block-mount swapon implementation doesn't support discard, so make zram-swap depend only on the default BusyBox implementation or, when unavailable, on the one present in the swap-utils package. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* zram-swap: enable swap discardRui Salvaterra2020-07-111-1/+1
| | | | | | | | | | | Zram block devices have supported trim/discard for over six years, let's enable it. This allows the zram device to actually free up allocated memory when it's marked as unused in the filesystem metadata, as explained in more detail in the original commit message [1]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/block/zram/zram_drv.c?h=linux-4.14.y&id=f4659d8e620d08bd1a84a8aec5d2f5294a242764 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* busybox: use CLOCK_MONOTONIC instead of gettimeofdayRui Salvaterra2020-07-111-1/+1
| | | | | | | | | | | The clock_gettime(CLOCK_MONOTONIC) syscall exists for so long that the first kernel version to support it is not even specified in the man page [1]. Let's enable it on BusyBox by default. Otherwise, gettimeofday will be used instead, which will give wrong results if the date/time is reset (time moving backwards). [1] https://linux.die.net/man/2/clock_gettime Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* lzo: switch to building with CMakeRosen Penev2020-07-111-11/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | CMake is less error prone that autotools and also compiles faster. Fixed license information. Added pkgconfig file to InstallDev so that packages that use it can find lzo. Before: time make package/lzo/compile -j 12 ________________________________________________________ Executed in 20.87 secs fish external usr time 26.95 secs 0.00 micros 26.95 secs sys time 5.49 secs 305.00 micros 5.49 secs After: time make package/lzo/compile -j 12 ________________________________________________________ Executed in 13.22 secs fish external usr time 19.59 secs 328.00 micros 19.59 secs sys time 4.03 secs 10.00 micros 4.03 secs Time output is with fish shell. make clean was ran before both attempts. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libubox: update to version 2020-07-11Petr Štetiar2020-07-111-3/+3
| | | | | | | | | f4e9bf73ac5c examples/lua: attempt to highlight some traps 53b9a2123fc6 lua/uloop: fd_add: use absolute indices for arguments c0941d3289fc lua/uloop: make get_sock_fd capable of absolute addresses 161c25960ba2 lua/uloop: fd_add() better args checking Signed-off-by: Petr Štetiar <ynezz@true.cz>
* linux-firmware: package EIP197 mini firmwareTomasz Maciej Nowak2020-07-112-4/+15
| | | | | | | | | | | | | Quoting part of original message from eefb5f741015 commit in linux-firmware repository: This adds the "minifw" version of the EIP197 firmware, which the inside- secure driver will use as a fallback if the original full-featured firmware cannot be found. This allows for using the inside-secure driver and hardware without access to "official" firmware only available under NDA. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* kirkwood: add support for Check Point L-50Pawel Dembicki2020-07-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Check Point L-50 from 600/1100 series routers. Specification: -CPU: Marvell Kirkwood 88F6281 1200MHz -RAM: 512MB -Flash: NAND 512MB -WiFi: mPCIe card based on Atheros AR9287 b/g/n -WAN: 1 Gigabit Port (Marvell 88E1116R PHY) -LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+4)) -USB: 2x USB2.0 -Express card slot -SD card slot -Serial console: RJ-45 115200 8n1 -Unsupported DSL Known issues: -DSL not supported -Expresscard not tested Installation: Step one -> backup: make backup u-boot and env for revert stock posibility make backup dsl_mac_addr, dmz_mac_addr, eth1addr, ethaddr and all lanX_mac_addr Step two -> Use kwboot tool to upload openwrt u-boot to RAM: run kwboot: "kwboot -B 115200 /dev/ttyUSB0 -b u-boot.kwb -p -t" end start u-boot Step three -> Restore macs (e.g. below): setenv eth1addr 00:1C:XX:XX:XX:6C setenv ethaddr 00:1C:XX:XX:XX:6B setenv lan1_mac_addr 00:1C:XX:XX:XX:6C setenv lan2_mac_addr 00:1C:XX:XX:XX:6D setenv lan3_mac_addr 00:1C:XX:XX:XX:6E setenv lan4_mac_addr 00:1C:XX:XX:XX:6F setenv lan5_mac_addr 00:1C:XX:XX:XX:70 setenv lan6_mac_addr 00:1C:XX:XX:XX:71 setenv lan7_mac_addr 00:1C:XX:XX:XX:72 setenv lan8_mac_addr 00:1C:XX:XX:XX:73 setenv dmz_mac_addr 00:1C:XX:XX:XX:74 setenv dsl_mac_addr 00:1C:XX:XX:XX:75 Step four -> flash u-boot: mw 0x0800000 0xffff 0x100000 nand erase 0x0 100000 tftp 0x0800000 openwrt-kirkwood-l50-u-boot.kwb nand write 0x0800000 0x0 0x100000 saveenv Step five -> run initramfs image: tftpboot 0x02000000 openwrt.bin; bootm 0x02000000; Step six -> install sysupgrade OpenWrt image: copy to /tmp/ sysupgrade image run sysupgrade Back to stock: Restore original u-boot end env. Install factory image via stock u-boot. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* uboot-kirkwood: add uboot for CheckPoint L-50Pawel Dembicki2020-07-115-2/+1078
| | | | | | This patch add u-boot for CheckPoint L-50 routers. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel: add package for Seiko S-35390A I2C RTCPawel Dembicki2020-07-111-0/+17
| | | | | | This patch adds kernel package for Seiko Instruments S-35390A. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* uboot-envtools: ath79: update ubootenv partion index for gl-ar300mHuangbin Zhan2020-07-111-4/+8
| | | | | | | The block index of u-boot-env changed from mtd1 to mtd3 after upgrading kernel to 5.4. This patch search the mtd block by label name, work as expect when perform a clean flash. Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
* base-files: remove useless catAdrian Schmutzler2020-07-111-1/+1
| | | | | | Check file contents directly instead of using cat. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* wireguard-tools: replace backticks by $(...)Adrian Schmutzler2020-07-111-4/+4
| | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: replace backticks by $(...)Adrian Schmutzler2020-07-114-11/+11
| | | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. This does not touch lib/upgrade/nand.sh, as there replacement is not trivial. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* procd: fix yet another build issue, this time with capabilitiesDaniel Golle2020-07-111-3/+3
| | | | | | | 3034eaf jail: use linux/capability.h instead of sys/capability.h Fixes: b6e440a0f5 ("procd: update to git HEAD") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: fix another seccomp-related build issueDaniel Golle2020-07-111-3/+3
| | | | | | | 3473671 ujail: add dependency on syscall-names-h Fixes: b6e440a0f5 ("procd: update to git HEAD") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: jail: fix build on platforms without seccomp supportDaniel Golle2020-07-111-3/+3
| | | | | Fixes: b6e440a0f5 ("procd: update to git HEAD") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to git HEADDaniel Golle2020-07-102-3/+41
| | | | | | | ea7a790 jail: add support for running OCI bundle bb4a446 uxc: add container management CLI tool Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: define RF5592 in init_eeprom routineDaniel Golle2020-07-103-3/+54
| | | | | | | | | | | Make sure RF5592 is set for RT5592 chip which apparently sometimes doesn't have RF defined (but always comes with RF5592). This patch was originally submitted on linux-wireless by Tom Psyborg <pozega.tomislav@gmail.com> but got rejected. Turns out the patch is actually needed. Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: iscsi-initator: fix kernel config symbolsLucian Cristian2020-07-091-2/+2
| | | | | | | | | | | | | | | Enable SCSI low-level drivers on targets that don't have it already in order to fix following build failures on few platforms: .config:4739:warning: symbol value 'm' invalid for SCSI_LOWLEVEL * Restart config... * SCSI low-level drivers SCSI low-level drivers (SCSI_LOWLEVEL) [Y/n] (NEW) aborted! Fixes: b88f8202c4ce ("kernel: add iscsi-initator support") Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com> [commit subject and description facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: add support for Arduino YunSungbo Eo2020-07-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Arduino Yun is a microcontroller development board, based on Atmel ATmega32u4 and Atheros AR9331. Specifications: - MCU: ATmega32U4 - SoC: AR9331 - RAM: DDR2 64MB - Flash: SPI NOR 16MB - WiFi: - 2.4GHz: SoC internal - Ethernet: 1x 10/100Mbps - USB: 1x 2.0 - MicroSD: 1x SDHC Notes: - Stock firmware is based on OpenWrt AA. - The SoC UART can be accessed only through the MCU. YunSerialTerminal is recommended for access to serial console. - Stock firmware uses non-standard 250000 baudrate by default. - The MCU can be reprogrammed from the SoC with avrdude linuxgpio. Installation: 1. Update U-Boot environment variables to adapt to new partition scheme. > setenv bootcmd "run addboard; run addtty; run addparts; run addrootfs; bootm 0x9f050000 || bootm 0x9fea0000" > setenv mtdparts "spi0.0:256k(u-boot)ro,64k(u-boot-env),15936k(firmware),64k(nvram),64k(art)ro" > saveenv 2. Boot into stock firmware normally and perform sysupgrade with sysupgrade image. # sysupgrade -n -F /tmp/sysupgrade.bin Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* base-files: add functions to set or clear bit in MAC addressSungbo Eo2020-07-081-2/+18
| | | | | | | | Some devices (e.g. Arduino Yun) need bitwise operations during MAC address setup. This commit adds generalized versions of macaddr_setbit_la(), which are helpful when manipulating a single bit in a MAC address. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* mediatek: add SD card image creation for Banana Pi R2David Woodhouse2020-07-081-1/+2
| | | | | | Based on work by Alexey Loukianov <lx2@lexa2.ru> and others. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* mediatek: use U-Boot FAT environment support for Banana Pi R2David Woodhouse2020-07-082-2/+93
| | | | | | | | | | Instead of building in a default environment which loads our environment from the FAT partition.... just ask U-Boot to do it. Submitted upstream at https://patchwork.ozlabs.org/project/uboot/list/?series=184688 Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* mediatek: fix U-Boot pinctrl setup for mt7623 eMMCDavid Woodhouse2020-07-081-0/+236
| | | | | | | | | | The U-Boot pinctrl driver for mt7623 was incomplete and didn't handle the settings required for eMMC to work. Submitted upstream at https://patchwork.ozlabs.org/project/uboot/list/?series=184529 Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* mediatek: add mt7623 u-boot build for Banana Pi R2David Woodhouse2020-07-082-1/+22
| | | | | | | For building full SD/eMMC images for Banana Pi R2 we'll want a u-boot image built for that platform. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* mediatek: new mt7623n preloader package for Banana PiDavid Woodhouse2020-07-081-0/+61
| | | | | | | | | | | Download the boot preloader code from the Banana Pi github repo and make it available for bootable SD card image creation. Supports only Banana Pi R2 for now. Based on work by Alexey Loukianov <lx2@lexa2.ru> and others. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* fstools: update to the latest versionDavid Woodhouse2020-07-081-3/+3
| | | | | | d34ea8e Use autoclear for overlay loopback device Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* kernel: iscsi-initator: fix missing dependencyPetr Štetiar2020-07-081-1/+1
| | | | | | | | | | Fixes following issue: Package kmod-iscsi-initiator is missing dependencies for the following libraries: crypto_hash.ko Fixes: b88f8202c4ce ("kernel: add iscsi-initator support") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mt7621-qtn-rgmii: enable RGMII connected Quantenna QV840Bjørn Mork2020-07-083-0/+94
| | | | | | | Write a magic value to a magic destination. This might be specific to the Mitrastar designed ZyXEL WAP6805. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* ipq806x: add support for Linksys EA7500 V1Pawel Dembicki2020-07-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Linksys EA7500 V1 router. Specification: - CPU: Qualcomm IPQ8064 - RAM: 256MB - Flash: NAND 128MB - WiFi: QCA9982 an+ac + QCA9983 bgn - Ethernet: 5 GBE Ports (WAN+ 4xLAN) (QCA8337) - USB: 1x USB 3.0 1x USB2.0 - Serial console: RJ-45 115200 8n1 (1V8 Voltage level) - 2 Buttons - 1 LED Known issues: - Some devices won't flash via web gui Installation: - Newer stock images doesn't allow to install custom firmware. - Please downgrade software to 1.1.2 version. Official firmware: https://downloads.linksys.com/downloads/firmware/FW_EA7500_1.1.2.172843_prod.gpg.img - Do it two times to downgrade all stored images. - Apply factory image via web-gui. Serial + TFTP method: - downgrade to 1.1.2 two times - connect ehternet and serial cable - set ip address of tftp server to 192.168.1.254 - put openwrt factory image to tftp folder and rename it to macan.bin - stop device while booting in u-boot - run command: "run flashimg" - run command: "setenv boot_part 1" - run command "saveenv" - reset Back to stock: - Please use old non-gpg image like this 1.1.2: https://downloads.linksys.com/downloads/firmware/FW_EA7500_1.1.2.172843_prod.img - ssh to router and copy image to tmp - use sysupgrade -n -F Tested by github users: @jack338c and @grzesiczek1 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [removed i2c4_pins, mdio0_pins, nand_pins, rgmii2_pins from DTSI] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: add support for Buffalo WTR-M2133HPYanase Yuki2020-07-084-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buffalo WTR-M2133HP is a Tri-Band router based on IPQ4019. Specification ------------- - SoC: Qualcomm IPQ4019 - RAM: 512MiB - Flash Memory: NAND 128MiB (MXIC MX30LF1G18AC) - Wi-Fi: Qualcomm IPQ4019 (2.4GHz, 1ch - 13ch) - Wi-Fi: Qualcomm IPQ4019 (5GHz, 36ch - 64ch) - Wi-Fi: Qualcomm QCA9984 (2T2R, 5GHz, 100ch - 140ch) - Ethernet: 4x 10/100/1000 Mbps (1x WAN, 3x LAN) - LED: 4x white LED, 4x orange LED, 1x blue LED - USB: 1x USB 3.0 port - Input: 2x tactile switch, 2x slide switch (2x SP3T) - Serial console: 115200bps, pinheader JP5 on PCB - Power: DC 12V 2A Flash instruction ----------------- 1. Set up a TFTP server (IP address: 192.168.11.10) 2. Rename "initramfs-fit-uImage.itb" to "WTR-M2133HP-initramfs.uImage" and put it into the TFTP server directory. 3. Connect the TFTP server and WTR-M2133HP. 4. Hold down the AOSS button, then power on the router. 5. After booting OpenWrt initramfs image, connect to the router by SSH. 6. Transfer "squashfs-nand-factory.ubi" to the router. 7. Execute the following commands. # ubidetach -p /dev/mtd15 # ubiformat /dev/mtd15 -f /tmp/openwrt-ipq40xx-generic-buffalo_wtr-m2133hp-squashfs-nand-factory.ubi # fw_setenv bootcmd bootipq 8. Perform reboot. Recover to stock firmware ------------------------- 1. Execute the following command. # fw_setenv bootcmd bootbf 2. Reboot and wait several minutes. Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>
* kirkwood: add support for Zyxel NSA310SPawel Dembicki2020-07-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zyxel NSA310S is a NAS based on Marvell kirkwood SoC. Specification: - Processor Marvell 88F6702 1 GHz - 256MB RAM - 128MB NAND - 1x GBE LAN port (PHY: Marvell 88E1318) - 2x USB 2.0 - 1x SATA - 3x button - 7x leds - serial on J1 connector (115200 8N1) (GND-NOPIN-RX-TX-VCC) Known issues: - no kernel module for RTC. [*] - buzzer (connected to MPP43) need to be drived by 1kHz signal - no kernel module for internal MCU connected via I2C[**] [*] Karoly Pocsi made simple, unofficial driver for HT1382. It can be found here: https://www.madadmin.com/zyxel-nsa320s-es-debian-linux-4-resz/ [**] Karoly Pocsi found how CPU talk with MCU: It is possible to query the MCU-controlled fan speed and temperature: i2cget -y 0x0 0x0a 0x07 i2cget -y 0x0 0x0a 0x08 The first value (0x07) is the temperature in ° C, the second (0x08) is the time in milliseconds to complete one fan revolution (rpm = 60,000 / value). Info translated from: https://www.madadmin.com/zyxel-nsa320s-es-debian-linux-4-resz/ Installation: TFTP: 1. Run serial console and go to u-boot. 2. Copy u-boot via tftp and write to NAND: => mw 0x0800000 0xffff 0x100000 => nand erase 0x0 100000 => setenv ipaddr 192.168.1.2 => setenv serverip 192.168.1.4 => tftp 0x0800000 nsa310s-u-boot.kwb => nand write 0x0800000 0x0 0x100000 => reset 3. Run new u-Boot, repair bootcmd and restore MAC address from sticker => setenv ethaddr AA:BB:CC:DD:EE:FF => saveenv 4. Copy and run initramfs image => setenv ipaddr 192.168.1.2 => setenv serverip 192.168.1.4 => tftpboot zyxel_nsa310s-initramfs-uImage => bootm 0x800000 5. Download sysupgrade image and perform sysupgrade USB: 1. Prepare usb fat32 drive with u-boot.kwb and initramfs image. Stick it to USB 2.0 port. 2. Run serial console and go to u-boot. 3. Copy u-boot from usb and write to NAND: => mw 0x0800000 0xffff 0x100000 => nand erase 0x0 100000 => usb start => fatload usb 0 0x0800000 u-boot.kwb => nand write 0x0800000 0x0 0x100000 => reset 4. Run new u-Boot, repair bootcmd and restore MAC address from sticker => setenv ethaddr AA:BB:CC:DD:EE:FF => saveenv 5. Copy and run initramfs image: => usb start => fatload usb 0 0x0800000 initramfs-uImage => bootm 0x800000 6. Download sysupgrade image and perform sysupgrade. Based on work ThBexx <thomas.beckler@hotmail.com> DTS based on dropped support in 0ebdf0c. Tested-by: Lech Perczak <lech.perczak@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [NSA310s -> NSA310S in DEVICE_MODEL] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-kirkwood: add support for Zyxel NSA310SPawel Dembicki2020-07-083-0/+80
| | | | | | | This patch modifies the u-boot config for the Zyxel NSA310S to work with OpenWrt. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* comgt: add new script to send ussd request and get the answerKirill Lukonin2020-07-081-0/+21
| | | | | | | | | | | New script for comgt. Should help to fetch balance or any additional information with USSD. This script uses the standard AT command which should be supported by all modems. Run-tested on: Mikrotik wAP LTE KIT Signed-off-by: Kirill Lukonin <klukonin@gmail.com> [fixed from/sob] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ipq40xx: add support for GL.iNet GL-S1300Dongming Han2020-07-082-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SOC: Qualcomm IPQ4029 (DAKOTA) ARM Quad-Core RAM: 512 MiB FLASH1: 16 MiB NOR - SPI0 FLASH2: 8 GiB eMMC ETH: Qualcomm QCA8075 WLAN1: Qualcomm Atheros QCA4029 2.4GHz 802.11b/g/n 2x2 WLAN2: Qualcomm Atheros QCA4029 5GHz 802.11n/ac W2 2x2 INPUT: Reset, WPS LED: Power, Mesh, WLAN UART1: On board pin header near to LED (3.3V, TX, RX, GND), 3.3V without pin - 115200 8N1 UART2: On board with BLE module SPI1: On board socket for Zigbee module Install via tftp - NB: need to flash transition image firstly Firstly install transition image: (IPQ40xx) # tftpboot 0x84000000 s1300-factory-to-openwrt.img (IPQ40xx) # sf probe && imgaddr=0x84000000 && source :script Secondly install openwrt sysupgrade bin: (IPQ40xx) # run lf Revert to factory image: (IPQ40xx) # tftpboot 0x84000000 s1300-openwrt-to-factory.img (IPQ40xx) # sf probe && imgaddr=0x84000000 && source :script The kernel and rootfs of factory firmware are on eMMC, and openwrt firmware is on NOR flash. The transition image includes U-boot and partition table, which decides where to load kernel and rootfs. After you firstly install openwrt image, you can switch between factory and openwrt firmware by flashing transition image. Signed-off-by: Dongming Han <handongming@gl-inet.com>
* kernel: add iscsi-initator supportLucian Cristian2020-07-081-0/+26
| | | | | | | | Module is needed for using iscsi-initiator userspace applications Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com> [added missing newline between kernel modules] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uclibc++: make verbosity affect uClibc++ buildWren Turkal2020-07-081-0/+8
| | | | | | | | | | Before this change, setting the verbosity to anything with V=blah would cause uclibc++ build to print errors to the screen. Now, it the clibc++ build verbosity will be altered in the following manners: * V=s will set V=1 in the uclibc++ build * V=sc will set V=2 in the uclibc++ build Signed-off-by: Wren Turkal <wt@penguintechs.org>
* ramips: Add support for Xiaomi Mi Router(Black,R2100)Emir Efe Kucuk2020-07-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Xiaomi Mi Router AC2100 is a *black* cylindrical router that shares many characteristics (apart from its looks and the GPIO ports) with the 6-antenna *white* "Xiaomi Redmi Router AC2100" See the visual comparison of the two routers here: https://github.com/emirefek/openwrt-R2100/raw/imgcdn/rm2100-r2100.jpg Specification of R2100: - CPU: MediaTek MT7621A - RAM: 128 MB DDR3 - FLASH: 128 MB ESMT NAND - WIFI: 2x2 802.11bgn (MT7603) - WIFI: 4x4 802.11ac (MT7615) - ETH: 3xLAN+1xWAN 1000base-T - LED: Power, WAN in Yellow and Blue - UART: On board (Don't know where is should be confirmed by anybody else) - Modified u-boot Hacking of official firmware process is same at both RM2100 and R2100. Thanks to @namidairo Here is the detailed guide Hack: https://github.com/impulse/ac2100-openwrt-guide Guide is written for MacOS but it will work at linux. needed packages: python3(with scapy), netcat, http server, telnet client 1. Run PPPoE&exploit to get nc and wget busybox, get telnet and wget firmware 2. mtd write openwrt-ramips-mt7621-xiaomi_mi-router-ac2100-kernel1.bin kernel1 3. nvram set uart_en=1 4. nvram set bootdelay=5 5. nvram set flag_try_sys1_failed=1 6. nvram commit 7. mtd -r write openwrt-ramips-mt7621-xiaomi_mi-router-ac2100-rootfs0.bin rootfs0 other than these I specified in here. Everything is same with: https://github.com/openwrt/openwrt/commit/f3792690c4f0567a8965d82898295b9d50c3bb7e Thanks for all community and especially for this device: @Ilyas @scp07 @namidairo @Percy @thorsten97 @impulse (names@forum.openwrt.com) MAC Locations: WAN *:b5 = factory 0xe006 LAN *:b6 = factory 0xe000 WIFI 5ghz *:b8 = factory 0x8004 WIFI 2.4ghz *:b7 = factory 0x0004 Signed-off-by: Emir Efe Kucuk <emirefek@gmail.com> [refactored common image bits into Device/xiaomi-ac2100, fixed From:] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* curl: bump to 7.71.1Hans Dedecker2020-07-071-2/+2
| | | | | | For changes in 7.71.1; see https://curl.haxx.se/changes.html#7_71_1 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* nat46: fix translation of ICMP protocol unreachableHans Dedecker2020-07-072-5/+5
| | | | | | | | Refresh patch 1182f30 nat46-core: Fix translation of ICMP protocol unreachable Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dropbear: make rsa-sha2-256 pubkeys usable againPetr Štetiar2020-07-071-0/+40
| | | | | | | | | | | | | Upstream in commit 972d723484d8 ("split signkey_type and signature_type for RSA sha1 vs sha256") has added strict checking of pubkey algorithms which made keys with SHA-256 hashing algorithm unusable as they still reuse the `ssh-rsa` public key format. So fix this by disabling the check for `rsa-sha2-256` pubkeys. Ref: https://tools.ietf.org/html/rfc8332#section-3 Fixes: d4c80f5b172e ("dropbear: bump to 2020.80") Tested-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ravpower-mcu: add missing PKG_RELEASEDavid Bauer2020-07-061-0/+1
| | | | | | This fixes the imagebuilder for this device. Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: allow ACS restriction with fixed channelJan Hoffmann2020-07-061-1/+1
| | | | | | | | | | | This can be useful when a DFS channel is configured, as the ACS channel list is taken into account when switching channels after a radar event. For example, this allows to prevent the SRD channels from being used in that case. Signed-off-by: Jan Hoffmann <jan@3e8.eu> [reorder structure] Signed-off-by: David Bauer <mail@david-bauer.net>
* linux-firmware: Update linux-firmware to 20200619John Audia2020-07-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git log --pretty=oneline --abbrev-commit 20200122..20200619 e96c121 (tag: 20200619, origin/main) amdgpu: update renoir firmware from 20.20 release db0402e amdgpu: update picasso firmware from 20.20 release c4e6e8f amdgpu: update raven2 firmware from 20.20 release 1967282 amdgpu: update raven firmware from 20.20 release f73f82c amdgpu: add vega20 TA firmware from 20.20 release 9ecaba8 amdgpu: update vega20 firmware from 20.20 release 3866af1 amdgpu: update vega12 firmware from 20.20 release adba945 amdgpu: update vega10 firmware from 20.20 release 3c5eef0 amdgpu: update navi10 firmware from 20.20 release 152c929 amdgpu: update navi14 firmware from 20.20 release 3890db3 (HEAD -> master, origin/master, origin/HEAD) rtl_nic: add firmware for RTL8125B 887d2a1 linux-firmware: Update firmware file for Intel Bluetooth AX200 3914943 linux-firmware: Update firmware file for Intel Bluetooth AX201 4966923 linux-firmware: Update firmware file for Intel Bluetooth 9560 5ee82c0 linux-firmware: Update firmware file for Intel Bluetooth 9260 d9880b1 Mellanox: Add new mlxsw_spectrum firmware xx.2007.1168 c2e313b rtw88: RTL8822C: update firmware version to v9.9 4d91664 Merge branch 'mrvl-prestera' of https://github.com/PLVision/linux-firmware a54dfbe Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware 51a773d cxgb4: Update firmware to revision 1.24.17.0 5611000 mrvl: add firmware for Prestera ASIC devices 8ba6fa6 (tag: 20200519) Merge tag 'iwlwifi-fw-2020-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware 5ee1c7d iwlwifi: update and add new FWs from core50-70 and core52-81 releases 401bd6d rtw88: RTL8821C: add firmware file v24.5 2ae9974 iwlwifi: update FWs to core47-142 release 50c1340 iwlwifi: update 8265 FW f8d32e4 rtw88: update firmware information and README 412f95a linux-firmware: add firmware for MT7915E 619d339 QCA: Add Bluetooth firmware for QCA9377 1392591 linux-firmware: add rebb firmware for mt7663 b2cad6a linux-firmware: Update firmware file for Intel Bluetooth AX200 c5ac1ad linux-firmware: Update firmware file for Intel Bluetooth AX201 642d115 linux-firmware: Update firmware file for Intel Bluetooth 9560 dc3047c linux-firmware: Update firmware file for Intel Bluetooth 9260 78c0348 (tag: 20200421) Use Link function for brcmfmac43362-sdio.lemaker,bananapro.txt f2df706 Add symlink for Dell XPS 15 9550 Broadcom Bluetooth patch-ram file 87dcb0e rtl_bt: Update RTL8822C BT FW to 0x0999_3AA1 3aa3ae4 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware 8aa36f5 cxgb4: Update T6 config file 6314fa0 amdgpu: update vega20 firmware for 20.10 1f308f1 amdgpu: update vega12 firmware for 20.10 1ffd569 amdgpu: update vega10 firmware for 20.10 9a0b0f4 amdgpu: update renoir firmware for 20.10 428a747 amdgpu: update raven2 firmware for 20.10 624ecdf amdgpu: update raven firmware for 20.10 7532f50 amdgpu: update picasso firmware for 20.10 75e352e amdgpu: update navi10 firmware for 20.10 3c175d1 amdgpu: update navi14 firmware for 20.10 8d7ac32 amdgpu: add navi14 TA firmware from 20.10 dd6b4db Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware 3afe520 cxgb4: Update firmware to revision 1.24.14.0 64dba0f Merge branch 'a630-zap' of https://github.com/andersson/linux-firmware 236ec45 linux-firmware: add firmware for MT7663 Wifi/BT combo device 107b9a2 Merge https://github.com/bgodavar/qca_bt_fw 5b240e5 Merge https://github.com/rjliao-qca/qca-btfw 47533bc linux-firmware: Update firmware file for Intel Bluetooth AX200 677930a linux-firmware: Update firmware file for Intel Bluetooth AX201 e6ff1e7 qcom: Add SDM845 Adreno ZAP shader firmware 1a8b0dc qca: Enable transparent WBS for WCN3991 4921f73 QCA: Add Bluetooth firmware for QCA6390 edf390c Merge branch 'v12573.77' of https://github.com/erinlo/linux_fw_scp 3c213aa mediatek: Add mt8183 SCP firmware 8eb0b28 (tag: 20200316) linux-firmware: Update firmware file for Intel Bluetooth AX200 b9f720f linux-firmware: Update firmware file for Intel Bluetooth AX201 426db50 linux-firmware: Update firmware file for Intel Bluetooth 9560 9361709 linux-firmware: Update firmware file for Intel Bluetooth 9260 3b3dd5a amdgpu: update vega20 firmware from 19.50 4871e7a amdgpu: update vega12 firmware from 19.50 4e7f0f8 amdgpu: update vega10 firmware from 19.50 fce60a9 rtl_bt: Add firmware and configuration files for RTL8822C BT UART chip d553c05 Merge branch 'tgl_huc_7.0.12_dmc_2.06' of git://anongit.freedesktop.org/drm/drm-firmware fb83402 i915: Add DMC firmware v2.06 for TGL 45d36b5 i915: add HuC firmware v7.0.12 for TGL 0148cfe Merge https://github.com/rjliao-qca/qca-btfw 94cb0a6 check_whence: python3/utf-8 support 7fa32bc Makefile: improve `make check` usefulness 4bb6805 mediatek: Remove in-tree symlinks 6f50efe Merge branch 'v1.1.4' of https://github.com/ruiwang-mtk/linux_fw_vpu 2db3978 qca: Fix blueooth firmware name for QCA6174 a8a18d1 mediatek: move MT8173 VPU FW to subfolder efcfa03 linux-firmware: Update firmware file for Intel Bluetooth AX201 83cb43e Merge https://github.com/bgodavar/qca_bt_wcn3991 54b017d qca: Add firmware files for BT chip wcn3991. 2277987 nvidia: add TU116/117 signed firmware f63922d drm/amdgpu: update to latest 19.50 firmware for raven 1168a90 Merge branch 'v1.1.4' of https://github.com/ruiwang-mtk/linux_fw_vpu_v1.1.4 0bd965d mediatek: update MT8173 VPU firmware to v1.1.4 6f89735 rtl_nic: update firmware for RTL8153A 5351afe rtl_bt: Update RTL8822C BT FW to V0x0998_C2B4 83a7c50 linux-firmware: add firmware for MT7622 feb91a4 linux-firmware: add version 2 for MT7615E b791e15 amdgpu: update to latest navi10 firmware from 19.50 0ff2f37 Revert "radeon: update oland rlc microcode from amdgpu" c2df39a Merge branch 'amlogic-vdec' of https://github.com/Elyotna/linux-firmware fb505a6 amlogic: update video decoder firmwares 6d9f399 amdgpu: add renoir firmware for 19.50 2c08b38 amdgpu: update raven2 firmware for 19.50 8846543 Merge commit '779514ec044a75ee6c9c20e52a2bf291f80d7d4e' of https://github.com/Netronome/linux-firmware 74d71b6 Merge branch 'bt-20200122' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware 779514e nfp: update Agilio SmartNIC flower firmware to rev AOTC-2.12.A.13 3055060 qca: update bluetooth firmware for QCA6174 Signed-off-by: John Audia <graysky@archlinux.us>
* libjson-c: update to 0.14DENG Qingfang2020-07-047-210/+191
| | | | | | | | | | | Update libjson-c to 0.14 Changelog: https://github.com/json-c/json-c/wiki/Notes-for-v0.14-release Switch to CMake because the upstream build system was changed ipk size increased by 2KB Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* odhcpd: bump to latest git HEADHans Dedecker2020-07-021-3/+3
| | | | | | 5da5299 odhcpd: fix compilation with GCC10 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* curl: bump to 7.71.0Hans Dedecker2020-07-012-5/+5
| | | | | | For changes in 7.71.0; see https://curl.haxx.se/changes.html#7_71_0 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ath10k-ct: update to version 2020-06-30Álvaro Fernández Rojas2020-07-014-14/+14
| | | | | | | | Backports commit "a1769bb68a850508a492e3674ab1e5e479b11254", which reverts upstream commit "76d164f582150fd0259ec0fcbc485470bcd8033e" (ath10k: fix DMA related firmware crashes on multiple devices). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 07:00:03 +0000