aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* ipq40xx: add MikroTik cAP ac supportAlar Aun2022-02-012-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the MikroTik RouterBOARD RBcAPGi-5acD2nD (cAP ac), a indoor dual band, dual-radio 802.11ac wireless AP, two 10/100/1000 Mbps Ethernet ports. See https://mikrotik.com/product/cap_ac for more info. Specifications: - SoC: Qualcomm Atheros IPQ4018 - RAM: 128 MB - Storage: 16 MB NOR - Wireless: · Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 2.5 dBi antennae · Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 2.5 dBi antennae - Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 2x 1000/100/10 port, PoE in and passive PoE out Unsupported: - PoE out Installation: Boot the initramfs image via TFTP and then flash the sysupgrade image using "sysupgrade -n" Signed-off-by: Alar Aun <alar.aun@gmail.com>
* wolfssl: update to 5.1.1-stableSergey V. Lobanov2022-02-015-144/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Bump from 4.8.1-stable to 5.1.1-stable Detailed release notes: https://github.com/wolfSSL/wolfssl/releases Upstreamed patches: 001-Maths-x86-asm-change-asm-snippets-to-get-compiling.patch - https://github.com/wolfSSL/wolfssl/commit/fa8f23284d4689c2a737204b337b58d966dcbd8c 002-Update-macro-guard-on-SHA256-transform-call.patch - https://github.com/wolfSSL/wolfssl/commit/f447e4c1fa4c932c0286fa0331966756e243db81 Refreshed patches: 100-disable-hardening-check.patch 200-ecc-rng.patch CFLAG -DWOLFSSL_ALT_CERT_CHAINS replaced to --enable-altcertchains configure option The size of the ipk changed on aarch64 like this: 491341 libwolfssl4.8.1.31258522_4.8.1-stable-7_aarch64_cortex-a53.ipk 520322 libwolfssl5.1.1.31258522_5.1.1-stable-1_aarch64_cortex-a53.ipk Tested-by: Alozxy <alozxy@users.noreply.github.com> Acked-by: Eneas U de Queiroz <cotequeiroz@gmail.com> Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
* kernel: add kmod-vrfMarek Behún2022-02-011-0/+17
| | | | | | | | | | | Add option to compile kmod-vrf, support for Virtual Routing and Forwarding (Lite). This module depends on NET_L3_MASTER_DEV, which is a boolean kernel option, so we need to create a configuration option also for this, and make kmod-vrf depend on it. Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: Make kmod-usb-net-lan78xx depend on kmod-of-mdioHauke Mehrtens2022-02-011-1/+1
| | | | | | | kmod-usb-net-lan78xx depends on kmod-of-mdio when this package is activated. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-envtools: Update to version 2022.01Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | The sizes of the ipk changed on MIPS 24Kc like this: 13281 uboot-envtools_2021.01-54_mips_24kc.ipk 13308 uboot-envtools_2022.01-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* libcap: Update to version 2.63Hauke Mehrtens2022-02-012-3/+5
| | | | | | | | | | | The sizes of the ipk changed on MIPS 24Kc like this: 11248 libcap_2.51-1_mips_24kc.ipk 14461 libcap_2.63-1_mips_24kc.ipk 18864 libcap-bin_2.51-1_mips_24kc.ipk 20576 libcap-bin_2.63-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* e2fsprogs: Update to version 1.46.5Hauke Mehrtens2022-02-013-32/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sizes of the ipk changed on MIPS 24Kc like this: 8788 badblocks_1.45.6-2_mips_24kc.ipk 8861 badblocks_1.46.5-1_mips_24kc.ipk 3652 chattr_1.45.6-2_mips_24kc.ipk 3657 chattr_1.46.5-1_mips_24kc.ipk 58128 debugfs_1.45.6-2_mips_24kc.ipk 60279 debugfs_1.46.5-1_mips_24kc.ipk 8551 dumpe2fs_1.45.6-2_mips_24kc.ipk 8567 dumpe2fs_1.46.5-1_mips_24kc.ipk 4797 e2freefrag_1.45.6-2_mips_24kc.ipk 4791 e2freefrag_1.46.5-1_mips_24kc.ipk 159790 e2fsprogs_1.45.6-2_mips_24kc.ipk 168212 e2fsprogs_1.46.5-1_mips_24kc.ipk 7083 e4crypt_1.45.6-2_mips_24kc.ipk 7134 e4crypt_1.46.5-1_mips_24kc.ipk 5749 filefrag_1.45.6-2_mips_24kc.ipk 6233 filefrag_1.46.5-1_mips_24kc.ipk 4361 libcomerr0_1.45.6-2_mips_24kc.ipk 4355 libcomerr0_1.46.5-1_mips_24kc.ipk 168040 libext2fs2_1.45.6-2_mips_24kc.ipk 174209 libext2fs2_1.46.5-1_mips_24kc.ipk 8514 libss2_1.45.6-2_mips_24kc.ipk 8613 libss2_1.46.5-1_mips_24kc.ipk 3148 lsattr_1.45.6-2_mips_24kc.ipk 3227 lsattr_1.46.5-1_mips_24kc.ipk 22530 resize2fs_1.45.6-2_mips_24kc.ipk 22909 resize2fs_1.46.5-1_mips_24kc.ipk 33315 tune2fs_1.45.6-2_mips_24kc.ipk 34511 tune2fs_1.46.5-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* util-linux: Update to version 2.37.3Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | | | | | | | | This release fixes two security mount(8) and umount(8) issues: CVE-2021-3996 Improper UID check in libmount allows an unprivileged user to unmount FUSE filesystems of users with similar UID. CVE-2021-3995 This issue is related to parsing the /proc/self/mountinfo file allows an unprivileged user to unmount other user's filesystems that are either world-writable themselves or mounted in a world-writable directory. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* util-linux: Do not build raw any more.Hauke Mehrtens2022-02-011-0/+1
| | | | | | | | | | | | | The man page of the raw tool does not build because the disk-utils/raw.8 file is missing. It looks like it should be in the tar.xz file we download, but it is missing. We do not package the raw tool, so this is not a problem. This fixes the following build error: No rule to make target 'disk-utils/raw.8', needed by 'all-am'. Stop. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* strace: Update to version 5.16Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | The sizes of the ipk changed on MIPS 24Kc like this: 289764 strace_5.14-1_mips_24kc.ipk 310899 strace_5.16-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ethtool: Update to version 5.16Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 795f420 cmis: Rename CMIS parsing functions 369b43a cmis: Initialize CMIS memory map da16288 cmis: Use memory map during parsing 6acaeb9 cmis: Consolidate code between IOCTL and netlink paths d7d15f7 sff-8636: Rename SFF-8636 parsing functions 4230597 sff-8636: Initialize SFF-8636 memory map b74c040 sff-8636: Use memory map during parsing 799572f sff-8636: Consolidate code between IOCTL and netlink paths 9fdf45c sff-8079: Split SFF-8079 parsing function 2ccda25 netlink: eeprom: Export a function to request an EEPROM page 86792db cmis: Request specific pages for parsing in netlink path 6e2b32a sff-8636: Request specific pages for parsing in netlink path c2170d4 sff-8079: Request specific pages for parsing in netlink path 9538f38 netlink: eeprom: Defer page requests to individual parsers 664586e Merge branch 'review/next/module-mem-map' into master 50fdaec ethtool: Set mask correctly for dumping advertised FEC modes c5e7133 cable-test: Fix premature process termination 73091cd sff-8636: Use an SFF-8636 specific define for maximum number of channels 837c166 sff-common: Move OFFSET_TO_U16_PTR() to common header file 8658852 cmis: Initialize Page 02h in memory map 27b42a9 cmis: Initialize Banked Page 11h in memory map 340d88e cmis: Parse and print diagnostic information eae6a99 cmis: Print Module State and Fault Cause 82012f2 cmis: Print Module-Level Controls d7b1007 sff-8636: Print Power set and Power override bits 429f2fc Merge branch 'review/cmis-diag' into master 32457a9 monitor: do not show duplicate options in help text c01963e Release version 5.16. The sizes of the ipk changed on MIPS 24Kc like this: 34317 ethtool_5.15-1_mips_24kc.ipk 34311 ethtool_5.16-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mbedtls: Update to version 2.16.12Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | | | | | | | | | | | | | This fixes the following security problems: * Zeroize several intermediate variables used to calculate the expected value when verifying a MAC or AEAD tag. This hardens the library in case the value leaks through a memory disclosure vulnerability. For example, a memory disclosure vulnerability could have allowed a man-in-the-middle to inject fake ciphertext into a DTLS connection. * Fix a double-free that happened after mbedtls_ssl_set_session() or mbedtls_ssl_get_session() failed with MBEDTLS_ERR_SSL_ALLOC_FAILED (out of memory). After that, calling mbedtls_ssl_session_free() and mbedtls_ssl_free() would cause an internal session buffer to be free()'d twice. CVE-2021-44732 The sizes of the ipk changed on MIPS 24Kc like this: 182454 libmbedtls12_2.16.11-2_mips_24kc.ipk 182742 libmbedtls12_2.16.12-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* gdb: Update gdb to version 11.2Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | | | | | | | | | | | | | This is a minor corrective release over GDB 11.1, fixing the following issues: * PR sim/28302 (gdb fails to build with glibc 2.34) * PR build/28318 (std::thread support configure check does not use CXX_DIALECT) * PR gdb/28405 (arm-none-eabi: internal-error: ptid_t remote_target::select_thread_for_ambiguous_stop_reply(const target_waitstatus*): Assertion `first_resumed_thread != nullptr' failed) * PR tui/28483 ([gdb/tui] breakpoint creation not displayed) * PR build/28555 (uclibc compile failure since commit 4655f8509fd44e6efabefa373650d9982ff37fd6) * PR rust/28637 (Rust characters will be encoded using DW_ATE_UTF) * PR gdb/28758 (GDB 11 doesn't work correctly on binaries with a SHT_RELR (.relr.dyn) section) * PR gdb/28785 (Support SHT_RELR (.relr.dyn) section) The sizes of the ipk changed on mips 24Kc like this: 2285775 gdb_11.1-3_mips_24kc.ipk 2287441 gdb_11.2-4_mips_24kc.ipk 191828 gdbserver_11.1-3_mips_24kc.ipk 191811 gdbserver_11.2-4_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* linux-firmware: intel: add firmware for AX210Sungbo Eo2022-01-311-7/+15
| | | | | | | | Add the most recent supported firmware file for Intel Wi-Fi 6E AX210 wireless chip. The API version 67 is not yet supported by the driver. Additional PNVM file is required since API version 62. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ubox: fix broken deferred start of logfile writerDaniel Golle2022-01-311-9/+1
| | | | | | | | | Just use 'start' action which will have the desired effect instead of trying to introduce a 'start_file' action which didn't work that way because procd jshn magic would have to wrap around it. Fixes: 88baf6ce2c ("ubox: only start log to file when filesystem has been mounted") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: seccomp/jail: Fix build error on arm with glibcDaniel Golle2022-01-311-3/+3
| | | | | | | | | | | | | | | | | | From: Peter Lundkvist <peter.lundkvist@gmail.com> This fixes the make_syscall_h.sh script to recognize both __NR_Linux, used by mips, and __NR_SYSCALL_BASE and __ARM_NR_BASE used by arm. Run-tested on arm (ipq806x) and mips (ath79), both with glibc. Compile-tested and checked resulting syscall_names.h file wuth glibc: aarch64, powerpc, x86_64, i486 musl: arm, mips Fixes: FS#4194, FS#4195 Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ubox: only start log to file when filesystem has been mountedDaniel Golle2022-01-301-3/+25
| | | | | | | | | If log_file is on an filesystem mounted using /etc/config/fstab we have to wait for that to happen before starting the logread process. Inhibit the start of the file-writer process and use a mount trigger to fire it up once the filesystem actually becomes available. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: support generic mount triggers and clean upDaniel Golle2022-01-301-11/+9
| | | | | | | | Allow init scripts to trigger free-form actions by exposing procd_add_action_mount_trigger. Clean up mount trigger wrappers while at it to reduce code duplication. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* util-linux: add lslocksRoman Azarenko2022-01-281-0/+16
| | | | | | This change adds the "lslocks" utility from util-linux. Signed-off-by: Roman Azarenko <roman.azarenko@iopsys.eu>
* arc770: Remove arc770 targetHauke Mehrtens2022-01-281-1/+1
| | | | | | | | | | | | | | | | | The arc700 target is not booting up since some time, see here: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/400 It looks like there is a problem in the toolchain when using glibc. Currently no one is working on fixing this problem, remove the target instead. This target also does not have many users we are aware of. If someone wants to have this target back, feel free to add a fixed version of this target again. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
* firewall4: update to latest Git HEADJo-Philipp Wich2022-01-281-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | 16a1070 fw4.uc: handle zone masq6 option 5f61dbf ruleset: fix chain selection for mark and dscp targets 0bc844b ruleset: properly deal with wildcards in zone device selectors 101988d fw4: fix family comparisons 127dbc0 ruleset: emit AF specific rules for DSCP matches d63cb89 fw4: fix parsing inverted numeric DSCP values 8c8a867 fw4: fix wrong `parse_network()` return value on `parse_subnet()` failure f85bb2d ruleset: consolidate zone matches for raw_prerouting and raw_output chains 5669bc7 fw4: consolidate device grouping logic 94f03e0 ruleset: properly render redirect targets without port fff9779 fw4: fix family selection logic for redirect rules ca88fcd tests: update interface dump mock data e60bb4b ruleset: support non-contiguous address masks 8fec51a fw4: fix potential crashes when parsing invalid redirect sections c08eb44 fw4: fix redirect destination zone resolving 0df6ba0 fw4: fix address selection logic for DNAT reflection rules 60a2518 tests: add test coverage for redirect rules e479eff fw4: add RFC-8622 'Least Effort' (LE) DSCP mark ac8a737 ruleset: remove redundant syn check bd5dc4b tests: run testcases in strict mode 3ee6a5c ruleset: fix undeclared variable access uncovered by strict mode Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ucode: update to latest Git HEADJo-Philipp Wich2022-01-282-16/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | c6dae42 LICENSE: add ISC license file 402f603 lib: introduce struct library dcb6ffd struct: fix PowerPC specific compiler pragma name a0512ea treewide: fix typo in exported function names and types eaaaf88 nl80211: fix wiphy dump reply merge logic e6efadb fs: add utility functions 54ef6c0 nl80211: fix premature netlink reply receive abort 07802f3 syntax: disallow keywords in object property shorthand notation 3489b75 vm: support object property access on resource value types dc8027c types: consider resource prototypes when marking reachable objects 5680fab treewide: fix upvalue reference type name 0d29b25 treewide: fix "resource" misspellings 99fdafd vm: introduce value registry 66f7c00 ubus: add support for async requests 5c77dd5 fs: implement fdopen(), file.fileno() and proc.fileno() b605dbf treewide: rework numeric value handling 599d233 vallist: store double values in a platform neutral manner 5bb9ab7 struct: reuse double packing routines from core 2fd7ab5 vm: optimize string concatenation eafa321 lib: implement uniq() function 6b2e79a types: add initial infrastructure for function serialization 725bb75 compiler, vm: use a program wide constant list 6c2caf9 source: refactor source file handling 371ba45 program: implement support for precompiling source files 3578afe build: support building without compile capabilities 61d0a34 lib: replace usages of vasprintf() with xvasprintf() 03b6a8e syntax: drop legacy syntax support 01132db lib: fix %J string formats with precision specifier 3f44c42 lib: rework format string handling a1b3c5d struct: implement `*` format, fix invalid memory accesses 34a04a2 run_tests.sh: fix exitcode evaluation abe38e7 run_tests.sh: add ability to define environment variables for testcases 04fa2ba tests: reorganize testcase files 6a55d10 lib: fix exists() error return value aa860a3 vm: fix `null` loose equality/inequality checks 3f6d199 vallist: uc_number_parse(): parse empty strings as `0`, not `NaN` ddc5aa7 vm: fix NaN strict equality tests Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* perf: Depend on libbfd and libopcodes when enabledFlorian Fainelli2022-01-271-1/+2
| | | | | | | | bpftool will enabled libbfd and libopcodes which gets picked up by perf as libraries to link against. Add those missing dependencies when either of these packages are enabled. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* netfilter: correct some dependenciesTiago Gaspar2022-01-271-2/+2
| | | | | | | | | | | | nf-nathelper-extra and nf-conntrack-netlink had iptables related dependencies, yet, when looking for the respective kernel symbols and checking it's dependencies it was confirmed that iptables wasn't required and that these were either it's own moodule or tool independent (nftables or iptables). Correct these and make sure no unneeded extras are pulled in. Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>
* uboot-mediatek: update to version 2022.01Daniel Golle2022-01-2321-111/+62
| | | | | | | Tested on BananaPi R2 (SD, eMMC), BananaPi R64 (SD, eMMC, SPI-NAND) and UniElec U7623-02 (eMMC). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-envtools: add configuration for UniElec U7623 boardDaniel Golle2022-01-231-0/+4
| | | | | | | Add U-Boot env settings to allow accessing the environment using fw_printenv and fw_setenv tools on the UniElec U7623 board. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update build for the U7623-02 boardDaniel Golle2022-01-236-70/+273
| | | | | | | Brings bootmenu and production/recovery dual-boot scheme like on the BPi-R2, BPi-R64, E8450 and UniFi 6 LR. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* netifd: update to git HEADHans Dedecker2022-01-231-3/+3
| | | | | | ed71876 iprule: add support for uidrange Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ucode: add temporary fix for integer formatting on 32bit systemsJo-Philipp Wich2022-01-232-1/+12
| | | | | | | | | | | | The ucode VM always passes 64bit integer values to sprintf implementation while the `%d` format expects 32bit integers on 32bit platforms, leading to incorrect formatting results. Temporarily solve the issue by casting the numeric argument to int until a more thorough fix arrives with the next update. Fixes: FS#4234 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* util-linux: Add tasksetHauke Mehrtens2022-01-211-0/+15
| | | | | | | This adds the taskset application from util Linux. It is already built, but not packaged yet. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* ltq-vdsl-mei: Remove static linkingHauke Mehrtens2022-01-211-0/+47
| | | | | | | | | This removes -static compile option. The -static option tells GCC to link this statically with the libc, which we do not want in OpenWrt. We want to link everything dynamically to the libc. This fixes a compile problem with glibc. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipip: add 'nohostroute' optionMatthew Hagan2022-01-192-3/+6
| | | | | | | | Add the nohostroute option as available for gre and wg tunnels to allow the user to prevent explicit creation of a route to the peer address. Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* ustream-ssl: update to Git version 2022-01-16Hauke Mehrtens2022-01-161-4/+4
| | | | | | 868fd88 ustream-openssl: wolfSSL: Add compatibility for wolfssl >= 5.0 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: Add support for OpenMesh OM2P v1Sven Eckelmann2022-01-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications: ====================== * Qualcomm/Atheros AR7240 rev 2 * 350/350/175 MHz (CPU/DDR/AHB) * 32 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2x 10/100 Mbps Ethernet * 1T1R 2.4 GHz Wi-Fi * 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x fast ethernet - eth0 + 18-24V passive POE (mode B) + used as WAN interface - eth1 + builtin switch port 4 + used as LAN interface * 12-24V 1A DC * external antenna The device itself requires the mtdparts from the uboot arguments to properly boot the flashed image and to support dual-boot (primary + recovery image). Unfortunately, the name of the mtd device in mtdparts is still using the legacy name "ar7240-nor0" which must be supplied using the Linux-specfic DT parameter linux,mtd-name to overwrite the generic name "spi0.0". Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin Signed-off-by: Sven Eckelmann <sven@narfation.org>
* mtd-utils: update to 2.1.4Nick Hainke2022-01-162-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes from 2.1.3 to 2.1.4: Features: - ubiscan debugging and statistics utility Fixes: - Some mtd-tests erroneously using sub-pages instead of the full page size - Buffer overrun in fectest - Missing jffs2 kernel header in the last release, leading to build failures on some systems. Changes from 2.1.2 to 2.1.3: Features: flashcp: Add new function that copy only different blocks flash_erase: Add flash erase chip Add flash_otp_erase Add an ubifs mount helper Add nandflipbits tool Fixes: mkfs.ubifs: Fix runtime assertions when running without crypto mtd-utils: Use AC_SYS_LARGEFILE Fix test binary installation libmtd: avoid divide by zero ubihealthd: fix UBIFS build dependency mkfs.ubifs: remove OPENSSL_no_config() misc-utils: Add fectest to build system mkfs.ubifs: Fix build with SELinux Fix typos found by Debian's lintian tool Fix jffs2 build if zlib or lzo headers are not in default paths Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: add missing kmod+regmap-i2c dependency for NCT7802Y moduleChristian Lamparter2022-01-151-1/+1
| | | | | | | | | | x86, mt7623 and others buildbot failed due to: |Package kmod-hwmon-nct7802 is missing dependencies for the following libraries: |regmap-core.ko |regmap-i2c.ko Fixes: 1ed50b92d157 ("package: kernel: add driver module for NCT7802Y") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mvebu: cortexa9: Add support for Ctera C200-V2Pawel Dembicki2022-01-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2-Bay NAS - maximum two 3.5" Harddisks Hardware: - SoC: Marvell 88F6707-A1 ARMv7 Processor 1,2GHz (ARMADA 370 SoC) - Ram: 1GB (2x Nanya NT5CC512M8DN-D1) - NAND Flash: 256MB (ESMT F59L2G81A-25T) - Lan: 1x GBE (Marvell 88E1318-NNB2) - Storage: 2x SATA HDD 3.5" Slot - USB: 2x USB 3.0 port (Renesas uPD720202) - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND) - LEDs: 13x GPIO controlled - Buttons: 2x GPIO controlled Known issues: - Buzzer is unused due lack of proper driver - USB1/2 usbport ledtrigger won't work (through DT) - Renesas uPD720202 requires firmware file. It's possible to find non-free binary. Please look for 'UPDATE.mem' file and put in into '/lib/firmware/renesas_usb_fw.mem' file. Installation: - Apply factory initramfs image via stock web-gui. - Do sysupgrade to make installation complete. Back to stock: - OpenWrt rootfs partition use unused space after stock firmware. - Full revert is possible. - Login via ssh and run: ## ctera_c200-v2_back_to_factory start ## . /lib/functions.sh part=$(find_mtd_part "active_bank") active_bank=$(strings "$part" | grep bank) if [ "$active_bank" = "bank1" ]; then echo "bank2" > /tmp/change_bank else echo "bank1" > /tmp/change_bank fi mtd write /tmp/change_bank active_bank reboot ## ctera_c200-v2_back_to_factory end ## Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (put back-to-stock script into commit message, removed dup. SUBPAGESIZE var, added 01_leds for non-working dt-usb-port trigger) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* package: kernel: add driver module for NCT7802YPawel Dembicki2022-01-151-0/+15
| | | | | | | | | | | | This commit add package with hwmon-nct7802 module. This driver implements support for the Nuvoton NCT7802Y hardware monitoring chip. NCT7802Y supports 6 temperature sensors, 5 voltage sensors, and 3 fan speed sensors. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (fixed c&p'ed module description) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for ASUS RT-ACRH17/RT-AC42UJoshua Roys2022-01-153-0/+2
| | | | | | | | | | | | | | | | | | | | | SOC: IPQ4019 CPU: Quad-core ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d DRAM: 256 MB NAND: 128 MiB Macronix MX30LF1G18AC ETH: Qualcomm Atheros QCA8075 Gigabit Switch (4x LAN, 1x WAN) USB: 1x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC) WLAN1: Qualcomm Atheros QCA4019 2.4GHz 802.11bgn 2x2:2 WLAN2: Qualcomm Atheros QCA9984 5GHz 802.11nac 4x4:4 INPUT: 1x WPS, 1x Reset LEDS: Status, WIFI1, WIFI2, WAN (red & blue), 4x LAN This board is very similar to the RT-ACRH13/RT-AC58U. It must be flashed with an intermediary initramfs image, the jffs2 ubi volume deleted, and then finally a sysupgrade with the final image performed. Signed-off-by: Joshua Roys <roysjosh@gmail.com> (added ALT0) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* hostapd: add op-class to get_status outputDavid Bauer2022-01-141-2/+9
| | | | | | Include the current operation class to hostapd get_status interface. Signed-off-by: David Bauer <mail@david-bauer.net>
* netifd: update to git HEADHans Dedecker2022-01-141-3/+3
| | | | | | 3043206 system: fix compilation with glibc 2.34 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* iptables: enable nftable support by defaultPaul Spooren2022-01-141-2/+2
| | | | | | | | | | | | | | OpenWrt plans to move over to firewall4 which uses nftables under the hood. To allow a smooth migration the package `iptables-nft` offer a transparent wrapper to apply iptables rules to nftables. Without the config option for nftables the package isn't installed and therefore can't be tested. This commit enabled it and therefore provides the wrapper. The size of the iptables package increases from 25436 to 26500 Bytes. Signed-off-by: Paul Spooren <mail@aparcar.org>
* netifd: update to git HEADHans Dedecker2022-01-121-3/+3
| | | | | | | | 96902e8 Revert "netifd: add devtype to ubus call" 29e6acf netifd: add devtype to ubus call 7ccbf08 netifd: add devtype to ubus call Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* procd: update to git HEADDaniel Golle2022-01-121-3/+3
| | | | | | | | | | ca6c35c uxc: usage message cosmetics e083dd4 uxc: fix two minor issues reported by Coverity 35dfbff procd: jail/cgroups: correctly enable "rdma" when requested 3b3ac64 procd: mount /dev with noexec ac2b8b3 procd: clean up /dev/pts mounts Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* firewall: update to latest HEADKevin Darbyshire-Bryant2022-01-101-3/+3
| | | | | | | | | 0f16ea5 options.c: add DSCP code LE Least Effort 24ba465 firewall3: remove redundant syn check df1306a firewall3: fix locking issue 3624c37 firewall3: support table load on access on Linux 5.15+ Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ath79: Add support for OpenMesh OM5P-AC v1Sven Eckelmann2022-01-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications: ====================== * Qualcomm/Atheros QCA9558 ver 1 rev 0 * 720/600/240 MHz (CPU/DDR/AHB) * 128 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2T2R 2.4 GHz Wi-Fi (11n) * 2T2R 5 GHz Wi-Fi (11ac) * 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power) * external h/w watchdog (enabled by default)) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * TI tmp423 (package kmod-hwmon-tmp421) for temperature monitoring * 2x ethernet - eth0 + AR8035 ethernet PHY (RGMII) + 10/100/1000 Mbps Ethernet + 802.3af POE + used as LAN interface - eth1 + AR8035 ethernet PHY (SGMII) + 10/100/1000 Mbps Ethernet + 18-24V passive POE (mode B) + used as WAN interface * 12-24V 1A DC * internal antennas Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin Signed-off-by: Sven Eckelmann <sven@narfation.org>
* ath79: Add support for OpenMesh OM5P-ANSven Eckelmann2022-01-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications: ====================== * Qualcomm/Atheros AR9344 rev 2 * 560/450/225 MHz (CPU/DDR/AHB) * 64 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 1T1R 2.4 GHz Wi-Fi * 2T2R 5 GHz Wi-Fi * 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * TI tmp423 (package kmod-hwmon-tmp421) for temperature monitoring * 2x ethernet - eth0 + AR8035 ethernet PHY + 10/100/1000 Mbps Ethernet + 802.3af POE + used as LAN interface - eth1 + 10/100 Mbps Ethernet + builtin switch port 1 + 18-24V passive POE (mode B) + used as WAN interface * 12-24V 1A DC * internal antennas Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin Signed-off-by: Sven Eckelmann <sven@narfation.org>
* opkg: update to git HEAD of 2022-01-09Daniel Golle2022-01-091-3/+3
| | | | | | | | | | db7fb64 libopkg: pkg_hash: prefer to-be-installed packages 2edcfad libopkg: set 'const' attribute for argv This should fix the ImageBuilder problems people are having since we introduced the 'uci-firewall' providers. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* firewall4: bump to git HEADStijn Tintel2022-01-091-3/+3
| | | | | | | | | | | | 9a509d4 ruleset.uc: consolidate ip and ip6 offload 21f311d ruleset.uc: don't trim newline before comment sign f121383 tests: enable flow offloading in tests 550df40 tests: add test for unknown defaults option 47c5a5b tests: add test for deprecated rule option 69a89d6 tests: add test for unknown rule option 07579df fw4.uc: handle interface zone option Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: add kmod-usb-net-lan78xxJosef Schlehofer2022-01-081-0/+17
| | | | | | | | | | | | | | | | | Add kernel module for Microchip LAN78XX based USB 2 & USB 3 10/100/1000 Ethernet adapters. [1] This kernel module is required for the Seeed Studio's Mini Router based on RPI CM4 [2]. [1] <https://cateee.net/lkddb/web-lkddb/USB_LAN78XX.html> [2] <https://www.seeedstudio.com/Dual-GbE-Carrier-Board-with-4GB-RAM-32GB-eMMC-RPi-CM4-Case-p-5029.html> Link: <https://github.com/openwrt/openwrt/pull/4893> Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (added kmod-phy-microchip and kmod-fixed-phy dependencies, rpi3 needs lan78xx but has it built-in) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-10 09:34:25 +0000