aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* hostapd: add acs feature indicationEnrique Giraldo2018-09-291-0/+4
| | | | Signed-off-by: Enrique Giraldo <enrique.giraldo@galgus.net>
* kernel: build support for NFSv4 in nfsdW. Michael Petullo2018-09-291-1/+5
| | | | Signed-off-by: W. Michael Petullo <mike@flyn.org>
* zram-swap: bump pkg versionEmil Muratov2018-09-291-1/+1
| | | | Signed-off-by: Emil Muratov <gpm@hotplug.ru>
* zram-swap: Add "max compression streams" configuration optionEmil Muratov2018-09-291-0/+14
| | | | | | | | | | Config option to limit maximum compression streams per zram dev for multicore CPU's. This could be defined via 'zram_comp_streams' option in the 'system' section of '/etc/config/system' file or via cli (for e.x. with 'uci set system.@System[0].zram_comp_streams=2 && uci commit system'). Default is number of logical CPU cores. Signed-off-by: Emil Muratov <gpm@hotplug.ru>
* zram-swap: fix number of created zram devices for multicore CPU'sEmil Muratov2018-09-291-45/+29
| | | | | | | | | Use only one zram swap device of the specified $size instead of [N x $size] devices for multicore CPUs Now zram module uses multiple compression streams for each dev by default, so we do not need to create several zram devs to utilize multicore CPUs. Signed-off-by: Emil Muratov <gpm@hotplug.ru>
* zram-swap: fix zram dev reset for multicore cpu devicesEmil Muratov2018-09-291-12/+10
| | | | | | | | | | * "zram stop" could reset up to $(num_of_cores) zram devices even if some of those were not mounted as swap dev's. This fix tries to enumerate mounted swap zram dev's before making a reset * remove hot-added zram devs on stop (except zram0) Signed-off-by: Emil Muratov <gpm@hotplug.ru>
* zram-swap: compression algorithm configuration optionEmil Muratov2018-09-291-0/+18
| | | | | | | | | | | | Compression algorithms for zram are provided by kernel crypto API, could be any of [lzo|zl4|deflate|<some_more>] depending on kernel modules. Compress algo for zram-swap could be defined via 'zram_comp_algo' option in 'system' section of '/etc/config/system' file, or via cli (for e.x. with 'uci set system.@System[0].zram_comp_algo=lz4 && uci commit system'). check available algo's via 'cat /sys/block/zram0 /comp_algorithm' Signed-off-by: Emil Muratov <gpm@hotplug.ru>
* base-files: make it possible to specify switch led modeChristian Lamparter2018-09-293-4/+9
| | | | | | | | | | | | | | | | | The swconfig switch led driver has the ability to switch between a "link, rx and/or tx" mode. However, this feature was not implemented in uci, the led init script and config_generate. This patch adds a seventh parameter to the ucidef_set_led_switch() function. The accepted values for this parameter are: link, rx and tx. Any permutations of these three values are supported, as long as they are properly encased with quotes. If the parameter is not specified it will default to "all" (link rx tx). Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* samsung: Add missing dependencies to kmod-of-mdioHauke Mehrtens2018-09-291-2/+2
| | | | | | | The samsung target builds of_mdio.ko as a module, add the needed dependency to it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: fix management frame protection issue with mt76 (and possibly ↵Felix Fietkau2018-09-291-0/+25
| | | | | | | | | other drivers) Software crypto wasn't working for management frames because the flag indicating management frame crypto was missing Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to latest, adds mt76x0u and mt76x2u support, fixes a mt7603 ↵Felix Fietkau2018-09-291-5/+110
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | powersave issue d220f43 Revert "mt76x2: reset HW before probe" 0853d79 Revert "mt76x2: add functions for setting extended MAC address registers" 8ba17b1 Revert "mt76: use a per rx queue page fragment cache" 3f0ac35 mt76x2: init: disable APCLI by default 38014de mt76x2: remove unnecessary break in mt76x2_mac_process_tx_rate() fbf4791 mt76x2: fix TXD_INFO bitmask definition d00c616 mt76x2: fix mrr idx/count estimation in mt76x2_mac_fill_tx_status() 0d42d22 mt76: introduce mt76_{incr,decr} utility routines 0f6379a mt76x2: dfs: add sw event ring buffer df8071f mt76x2: dfs: add sw pattern detector 016df9c mt76x2: debugfs: add sw pulse statistics to dfs debugfs a6915cb mt76: move MT_TXD_INFO, MT_MCU_MSG and MT_RX_FCE_INFO defs in dma.h 911e6aa mt76x2: move mt76x2_fw_header and mt76x2_patch_header definitions in mcu.h c55d29b mt76x2: move utility routines in mt76x2.h d08ea82 mt76x2: introduce mt76x2_init_device routine 6a1e809 mt76x2: move interface_modes definition in mt76x2_init 5aa0972 mt76x2: introduce mt76x2_mac_load_tx_status routine 730b86c mt76x2: add napi struct to mt76_rx_poll_complete/mt76_rx_complete signatures 1ab6cea mt76x2: add buffer len to mt76x2_mac_write_txwi signature 7ac6dac mt76: rename mt76_tx_queue_skb in mt76_dma_tx_queue_skb 66f3949 mt76: introduce tx_queue_skb function pointer in mt76_bus_ops d099694 mt76: introduce mt76x2-common module 9bf1aa1 mt76: add mt76x2_tx_common to mt76x2-common module 29f960a mt76: add mt76x2_mac_common to mt76x2-common module 8f568ce mt76: add mt76x2_init_common to mt76x2-common module 61c4c61 mt76: add mt76x2_common to mt76x2-common module 264edbe mt76: add mt76x2_phy_common to mt76x2-common module 7625508 mt76: move mt76x2_debugfs in mt76-common module 99a3afa mt76: add usb support to mt76 layer 25b4598 mt76: add driver code for MT76x2u based devices 253c443 mt76x0: core files 6ed7bc2 mt76x0: mac files a2c1068 mt76x0: usb files c332481 mt76x0: mcu files 0d7d9ed mt76x0: phy files 5d50834 mt76x0: init files c633654 mt76x0: eeprom files 18a9d4e mt76x0: trace and debugfs files 7395bba mt76x0: dma and tx files 08dec4c mt76x0: main file 5892efd mt76: add more states e176af8 mt76: Kconfig and Makefile for mt76x0 driver 5c38d48 mt76x0: disable HW before probe 2f37f60 mt76x0: load firmware from mediatek subdir 1388140 mt76x0: rename mt76_* functions 1cb65d5 mt76x0: rename trace symbols 4fe2b16 mt76x0: correct type for eeprom gain value 560b643 mt76x0: perform mt76x0_mac_set_ampdu_factor d1645aa mt76x0: Remove VLA usage f8a0da4 mt76: Fix comparisons with invalid hardware key index 884eca5 mt76: unify wait_for_mac fc636f0 mt76: rename mt76x2_regs.h 493feb9 mt76: merge mt76x0/regs.h into mt76x02_regs.h a238099 mt76: create new mt76x02-lib module for common mt76x{0,2} code 55bceee mt76: unify mac_get_key_info f6c19cf mt76: add helpers for register access with mt76_dev struct 34a95b8 mt76: unify mac_shared_key_setup 4286255 mt76: unify mt76x02_mac_wcid_set_key 732535e mt76: unify mac_wcid_setup 51b74ac mt76: use mac_wcid_set_drop in mt76x0 1b4a98f mt76x0: use mt76_wcid_free in mt76x0 fcf2130 mt76: unify mt76x02_vif struct 1f35eb5 mt76: unify sta structure part 1 086ea9f mt76: unify sta structure part 2 caff9a2 mt76x0: initalize custom tx queues 7362da7 mt76x0: use mt76x02_sta and mt76x02_tx_status 3a03aa1 mt76: move mt76_reg_pair definition in mt76.h a853831 mt76: split __mt76u_mcu_send_msg and mt76u_mcu_send_msg routines a80564f mt76: move mt76x2u_mcu_deinit routine in mt76-usb module ac92496 mt76: add multiple regs read support to usb_mcu layer 8b0e08f mt76x0: use mt76u_init for bus initialization ef32115 mt76x0: remove mt76x0_vendor_reset routine 949858f mt76x0: remove mt76x0_vendor_single_wr routine 21ecb9b mt76x0: remove mt76x0_mcu_msg_alloc routine 4cfeebb mt76x0: use shared mt76 usb mcu completion 2600712 mt76x0: remove mt76x0_complete_urb routine 0bd0fe8 mt76x0: remove mt76x0_vendor_request routine f88bde2 mt76x0: remove unused mt76x0_wait_asic_ready routine 7eca333 mt76x0: use mt76u_mcu_send_msg utility routine to send fw cmds 8fedb79 mt76x0: remove unused mt76x0_mcu structure e8fe4f3 mt76x0: use mt76u_mcu_fw_send_data for fw uploading b9c46a8 mt76x0: remove unused routines for usb_buff alloc/free ed3366d mt76: Enable NL80211_EXT_FEATURE_CQM_RSSI_LIST 9867146 mt76: verify evt type in usb mcu response 82a8c8a mt76: move wcid fields to common mt76_dev struct f409c6b mt76: unify sta_add / sta_remove d972ddd mt76: pratially unify add_interface f8f5788 mt76x0: fix wrong usage of wcid_mask in remove_interface 380f89c mt76: unify ampdu_action 8c7098e mt76: unify set_key 2a20cfc mt76x0: remove empty sta_notify a690333 mt76: unify AC to hw queue mapping 4453308 mt76: unify conf_tx d9352cb mt76x0: remove vif_mask 196720e mt76: unify remove_interface 57c3e89 mt76: unify add_interface 91fce2f mt76: unify sta_rate_tbl_update and related helpers 3977f48 mt76: unify txwi and rxwi structures 41e0403 mt76: unify load_tx_status 4674502 mt76: unify send_tx_status and related helpers 02816b0 mt76: use mt76_rx_status in mt76x0 0a17b1e mt76: unify mac_process_rate 8aac175 mt76x0: reserve enough space in mac80211 81a655a mt76: unify {insert/remove}_hdr_pad d8f7d2e mt76: partially unify filling txwi fields 3533718 mt76x2: change mt76x2_tx_complete routine signature 469aeb1 mt76: move mt76x2_tx_complete routine in mt76x02-lib module 87f138b mt76: move mt76x2u_remove_dma_hdr in mt76x02-lib module c87a7e8 mt76: move mt76x2u_tx_complete_skb in mt76x02-lib moudule b85e072 mt76: move mt76_qsel definition in dma.h 53b3c5a mt76: move mt76x2u_set_txinfo in mt76x02-lib module 34cec25 mt76x0: introduce mt76x0_tx_prepare_skb routine 6c5ac15 mt76: move mt76x2u_tx_status_data in mt76x02-lib module 0ba8261 mt76x0: init mt76_driver_ops callbacks 2615090 mt76x0: use mt76_alloc_device for device allocation 3c40eaf mt76x0: disable usb rx bulk aggregation 746edd7 mt76x0: mark device as running in mt76x0_start dd77785 mt76x0: simplify mt76_mac_process_rx signature 3739601 mt76x0: add mt76x0_queue_rx_skb routine 062aaa8 mt76x0: unify tx/rx datapath with mt76x2u driver 85f171f mt76x0: stop stat workqueue at hw stop 8c68115 mt76x0: set max fragments size ac02f5c mt76x0: remove unused dma.c source file 964df72 mt76x0: remove unused stat work_queue afb34b8 mt76x0: remove unused {tx/rx}_queue definitions a4fd791 mt76x0: remove unused mt76x0_tx_status routine 0e92ff6 mt76x0: remove unused endpoint definitions 8340e19 mt76x0: remove unused stat_work bfbbf05 mt76x0: enable per-sta tx queueing a8fcaa3 mt76x0: init hw capabilities 6a9b73c mt76x0: trim rx skb to proper length aa0c279 mt76: remove unused MT76_MORE_STATS state 873d792 mt76x0: remove mt76x0_stop_hardware routine 246a216 mt76: move mt76 rate definitions in mt76x02-lib module aae3fb8 mt76x0: alloc mcu buffers first in mt76x0_mcu_cmd_init 3c693a1 mt76x0: fix memory leak during hw probe 98faee1 mt76x0: move stop related routines in mt76x0_mac_stop d07c02a mt76x0: move mt76x0_init_hardware in mt76x0_register_device 12c01f4 mt76x0: do not free/alloc buffers during suspend/resume 297cc34 mt76x0: remove has_{2,5}ghz fields of mt76x0_eeprom_params 2d77a9a mt76x0: use mt76_register_device for device registration bb57912 mt76x0: inital split between pci and usb 3e241f3 mt76x0: remove unused mt76x0_wcid a8c61c2 mt76x0: remove some usb specific code from mt76x0_register_device e4a7387 mt76x0: make device allocation bus neutral 6da4642 mt76x0: run vco calibration for each channel configuration 1ac35da mt76: move mt76x0 and mt76x2 mcu shared defs in mt76x02_mcu.h 4d43674 mt76: add mt76_mcu_ops data structure for mcu related pointers 479b153 mt76: add usb implementation of {wr,rd}_rp e525b01 mt76: add rd_rp and wr_rp to bus_ops/mcu_ops f5590b0 mt76: usb: use common helpers for mcu_alloc_msg()/mcu_send_msg() d2773ce mt76: usb: move mt76x02 mcu code in mt76x02-usb module 6337ffb mt76: usb: move mt76u_skb_dma_info in mt76x02_usb_core.c 5a79f17 mt76x02: move TXD/RXD/MCU definitions in mt76x02_dma.h 88ece32 mt76x02: add static qualifier to mt76x02_remove_dma_hdr d63b72f mt76x0: remove unused mt76x0_burst_read_regs 0aef244 mt76x0: remove mt76x0_burst_write_regs() 14aaf87 mt76: usb: remove skb check in mt76x{0,2}u mcu routines 46ba81c mt76x2: use mt76_dev instead of mt76x2_dev in mt76x2_tx_queue_mcu dbc4442 mt76x2: remove leftover mt76u_buf data structure in mt76x2_mcu 26909cd mt76: introduce mmio data structure in mt76_dev 425e7e0 mt76: move __iomem regs in mt76_mmio 28cfe61 mt76x2: use mt76_dev instead of mt76x2_dev in mt76x2_mcu_msg_send a1e27de mt76x2: use common helpers for mcu_alloc_msg()/mcu_send_msg() 90b1eac mt76: unify firmware header between mt76x0 and mt76x2 a0cbd4b mt76: move mt76{0,2} mcu shared code in mt76x02_mcu.c a633c61 mt76x2: move mt76x2 mcu shared code in mt76x2_mcu_common.c ce91108 mt76: move shared mcu_calibrate routine in mt76x02-lib module 2b3b4df mt76x2: move mt76x2_phy_tssi_compensate in mt76x2-common module 39a380a mt76: use a per rx queue page fragment cache b4a2141 mt76x2u: run device cleanup routine if resume fails df11092 treewide: Use struct_size() for kmalloc()-family 788becd treewide: devm_kzalloc() -> devm_kcalloc() 971005a mt76x2u: Add support for Alfa AWUS036ACM 878b0bd mt76: fix debugfs_simple_attr.cocci warnings 44ed12d wireless: Use octal not symbolic permissions a6f80ef build: make building 76x2e and 7603e optional 1047913 mt76x0: usb: move firmware loading to usb.c 26b20f8 mt76x0: remove mcu source file 44145f3 mt76x0: remove unused usb header file d56be99 mt76x0: usb: remove mt76_fw definition 3733445 mt76x2: fix tx power configuration for VHT mcs 9 0aced80 mt76x0: pci: add mt7650 PCI ID 35e88c0 mt76x0: pci: add fw uploading routine 3991afa mt76: move seq_put_array in mt76-core module 6cf6fba mt76: add stbc entries to mt76_rate_power 4451f99 mt76: move common eeprom definitions in mt76x02-lib module c9100cb mt76: move eeprom utility routines in mt76x02_eeprom.h 611b8c7 mt76: move mt76x2_eeprom_get in mt76x02_eeprom.h b59ed56 mt76: move mt76x02_mac_setaddr in mt76x02-lib module 844daeb mt76: move mt76x2_get_efuse_data in mt76x02-lib module 7556cb9 mt76: move mt76x2_ext_pa_enabled routine in mt76x02_eeprom.c 19d7853 mt76x0: remove mt76x0_set_country_reg routine ba7a3da mt76: add mt76x02_get_rx_gain and mt76x02_get_lna_gain utility routines 35b0a2a mt76x0: unify lna_gain parsing 2a470db mt76x0: unify rssi_offset parsing fe89537 mt76x0: unify temperature offset parsing 76bc22f mt76x0: unify freq offset parsing bedeb3d mt76: move mt76x02_eeprom_parse_hw_cap in mt76x02-lib module 1adcd39 mt76x0: unify parse hw capabilities df23620 mt76: move mt76x2_tssi_enabled in mt76x02_eeprom.h ebca136 mt76: usb: remove WARN_ON in mt76u_get_rx_entry_len cf8f750 mt76: fix return value of mt76x02_wait_for_mac f802bd5 mt76: move mt76_rate_power in mt76_dev 4b6093c mt76: add mt76x02_phy_set_txpower utility routine c206b8c mt76: move rate_txpower handler in mt76 debugfs 4da6fd3 mt76: move mt76x02_rate_power_val in mt76x02-lib module fb3806d mt76x0: remove mt76x0_phy_set_tx_power and mt76x0_extra_power_over_mac 730db56 mt76x0: remove eeprom dependency from mt76x0_set_tx_power_per_rate 212fa2c mt76x0: remove eeprom dependency from mt76x0_get_power_info 280e452 mt76x0: use shared debugfs implementation 21fddc3 mt76x0: phy: introduce mt76x0_phy_set_txpower routine b0d85d4 mt76: include linux/module.h in files using MODULE_* a47083b mt76: report firmware version using ethtool dc66f7c mt76: usb: make rx page_frag_cache access atomic 09d696b mt76: use skb_pad() instead of __skb_pad() e8d7890 mt76x0: add quirk to disable 2.4GHz band for Archer T1U e76fe15 mt76x2: disable WLAN core before probe 41c552f mt76x0: work around cflags issue in compat layer for trace.h b95bc8a mt76x0: use mt76_poll in mt76x0_set_wlan_state 3a3554a mt76: move wait_for_wpdma in mt76x02_dma.h 0527feb mt76: add mt76x02_dma_enable/mt76x02_dma_disable utility routines a8fda4b mt76: move mt76x02_set_irq_mask in mt76x02_mmio.c 11e3028 mt76: move queue initialization in mt76x02_mmio.c 5a29094 mt76: move mt76x02_beacon_offset in mt76x02_util.c 5f1d0ff mt76: mmio: add implementation of wr_rp and rd_rp 47eee35 mt76: move mt76x2_wait_for_bbp in mt76x02-lib module 7cc4be7 mt76x0: update initvals to latest version of vendor driver e1a2179 mt76x0: pci: move mcu code in pci_mcu.c 886f6fc mt76x0: usb: move mcu code in usb_mcu.c c7b28f4 mt76x0: use mt76x02 utility routines in mt76x0 init code 005d40a mt76x0: init: remove duplicated initialization 94776fe mt76x0: init: remove MT_PBF_SYS_CTRL configuration in mt76x0_reset_csr_bbp 5bb8339 mt76x0: init rx filter in mt76x0_init_hardware fe1379a mt76: add mt76x02_mac_start routine da982d3 mt76x0: usb: move initialization code in usb.c 22be43e mt76x0: pci: add hw initialization at bootstrap 15a50e1 mt76x0: phy: set antenna parameter according to wireless band 5d2a331 mt76: move set_{tx,rx}_path routines in mt76x02-lib module 8050d71 mt76x0: add ieee80211_ops ops pointer to mt76x0_alloc_device signature c240904 mt76x0: pci: add mt76x0e_{start/stop} callbacks b50f38a mt76x0: eeprom: load eeprom data from mtd by default fb5bae0 mt76x0: usb: move mt76x0u_tx_prepare_skb in usb.c 4047e1f move mt7603 source files to mt7603/ 14f70f4 mt7603: fix wcid for frames sent via drv_tx 542f17e mt76: fix handling ps-poll frames 7464cc9 mt76: check aggregation sequence number for frames sent via drv_tx Signed-off-by: Felix Fietkau <nbd@nbd.name>
* util-linux: add eject supportRosy Song2018-09-281-1/+19
| | | | Signed-off-by: Rosy Song <rosysong@rosinson.com>
* ath10k-ct: fix bandwidth conversion bugHauke Mehrtens2018-09-281-0/+98
| | | | | | | | | | This backports a patch from the upstream kernel which was also shipped previously in mac80211. This fixes the following warning: WARNING: CPU: 0 PID: 2881 at backports-4.19-rc5-1/net/wireless/util.c:1146 cfg80211_calculate_bitrate+0x238/0x348 [cfg80211] invalid rate bw=2, mcs=0, nss=1 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-ct: adds leds supportAnsuel Smith2018-09-283-0/+663
| | | | | | This rework and adds patch from ath10k source to make leds work also on candela source Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* mac80211: fix ipw200 build with kernel < 4.10Hauke Mehrtens2018-09-281-0/+34
| | | | | | | The __change_mtu() function is only compiled when CPTCFG_IPW2200_PROMISCUOUS is set, more it to the general area. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wireguard: bump to 0.0.20180925Kevin Darbyshire-Bryant2018-09-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 33523a5 version: bump snapshot 0759480 curve25519-hacl64: reduce stack usage under KASAN b9ab0fc chacha20: add bounds checking to selftests 2e99d19 chacha20-mips32r2: reduce stack and branches in loop, refactor jumptable handling d6ac367 qemu: bump musl 28d8b7e crypto: make constant naming scheme consistent 56c4ea9 hchacha20: keep in native endian in words 0c3c0bc chacha20-arm: remove unused preambles 3dcd246 chacha20-arm: updated scalar code from Andy 6b9d5ca poly1305-mips64: remove useless preprocessor error 3ff3990 crypto-arm: rework KERNEL_MODE_NEON handling again dd2f91e crypto: flatten out makefile 67a3cfb curve25519-fiat32: work around m68k compiler stack frame bug 9aa2943 allowedips: work around kasan stack frame bug in selftest 317b318 chacha20-arm: use new scalar implementation b715e3b crypto-arm: rework KERNEL_MODE_NEON handling 77b07d9 global: reduce stack frame size ddc2bd6 chacha20: add chunked selftest and test sliding alignments and hchacha20 2eead02 chacha20-mips32r2: reduce jumptable entry size and stack usage a0ac620 chacha20-mips32r2: use simpler calling convention 09247c0 chacha20-arm: go with Ard's version to optimize for Cortex-A7 a329e0a chacha20-mips32r2: remove reorder directives 3b22533 chacha20-mips32r2: fix typo to allow reorder again d4ac6bb poly1305-mips32r2: remove all reorder directives 197a30c global: put SPDX identifier on its own line 305806d ratelimiter: disable selftest with KASAN 4e06236 crypto: do not waste space on selftest items 5e0fd08 netlink: reverse my christmas trees a61ea8b crypto: explicitly dual license b161aff poly1305: account for simd being toggled off midway 470a0c5 allowedips: change from BUG_ON to WARN_ON aa9e090 chacha20: prefer crypto_xor_cpy to avoid memmove 1b0adf5 poly1305: no need to trick gcc 8.1 a849803 blake2s: simplify final function 073f3d1 poly1305: better module description Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: bump to v2.80test7Kevin Darbyshire-Bryant2018-09-273-102/+3
| | | | | | | | | | | | | | | | | | | Bump to latest test release: 3a610a0 Finesse allocation of memory for "struct crec" cache entries. 48b090c Fix b6f926fbefcd2471699599e44f32b8d25b87b471 to not SEGV on startup (rarely). 4139298 Change behavior when RD bit unset in queries. 51cc10f Add warning about 0.0.0.0 and :: addresses to man page. ea6cc33 Handle memory allocation failure in make_non_terminals() ad03967 Add debian/tmpfiles.conf f4fd07d Debian bugfix. e3c08a3 Debian packaging fix. (restorecon) 118011f Debian packaging fix. (tmpfiles.d) Delete our own backports of ea6cc33 & 4139298, so the only real changes here, since we don't care about the Debian stuff are 48b090c & 3a610a0 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mac80211: Use backports-4.19-rc5-1.tar.xzHauke Mehrtens2018-09-277-14/+349
| | | | | | | | | | This is an official release with some minor changes compared to the unofficial 4.19-rc4-1 we used before. * added bcma and ssb again, which is removed in OpenWrt * fix to build with kernel 4.19 * other minor fixes not relevant for Openwrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* iptables: fix dependency for libip6tc on IPV6Rosy Song2018-09-261-2/+2
| | | | Signed-off-by: Rosy Song <rosysong@rosinson.com>
* uboot-lantiq: fix compatibility with gcc7Martin Schiller2018-09-261-0/+142
| | | | | | | Backport u-boot commit 704f3acfcf55343043bbed01c5fb0a0094a68e8a to fix compatibility with gcc7. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ath10k-ct: update to version ath10k-4.16Hauke Mehrtens2018-09-264-9/+219
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* iw: update nl80211.hHauke Mehrtens2018-09-261-17/+607
| | | | | | Now this file matches the version in backports. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: fix compile warning in 986-rt2x00-add-TX-LOFT-calibration.patchHauke Mehrtens2018-09-261-1/+1
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Add patches which were added laterHauke Mehrtens2018-09-2618-677/+1
| | | | | | | | These patches were added after the new matches structure for the mac80211 package was created. All the deleted patches are already integrated in kernel 4.19-rc4. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: update to version based on 4.19-rc4Hauke Mehrtens2018-09-26105-1092/+403
| | | | | | | | | | | | This updates mac80211 to backports based on kernel 4.19-rc4. I plan to integrate all the patches which are in this tar into upstream backports soon. I used the backports generated from this code: https://github.com/hauke/backports/commits/wip2 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: rt2x00: add experimental patches from Stanislaw GruszkaDaniel Golle2018-09-265-0/+1067
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: remove obsolete patchDaniel Golle2018-09-261-136/+0
| | | | | | | | According to Stanislaw Gruszka the patch 600-23-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch should be dropped. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: add TX LOFT calibrationTomislav Požega2018-09-261-0/+1005
| | | | | | Add TX LOFT calibration from mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
* mac80211: rt2x00: add RXIQ calibrationTomislav Požega2018-09-261-0/+417
| | | | | | | Add RXIQ calibration found in mtk driver. With old openwrt builds this gets us ~8Mbps more of RX bandwidth (test with iPA/eLNA layout). Please try if this makes any difference among various board/RF layouts. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
* mac80211: rt2x00: add RXDCOC calibrationTomislav Požega2018-09-261-0/+102
| | | | | | Add RXDCOC calibration code from mtk driver. Please try if this makes any difference among various board/RF layouts. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
* mac80211: rt2x00: add r calibrationTomislav Požega2018-09-261-0/+193
| | | | | | Add r calibration code as found in mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
* mac80211: rt2x00: add RF self TXDC calibrationTomislav Požega2018-09-261-0/+89
| | | | | | Add TX self calibration based on mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
* mac80211: rt2x00: write registers required for reducing power consumptionTomislav Požega2018-09-261-0/+43
| | | | | | | | | | | Write registers required for reducing power consumption like the vendor driver does when ADJUST_POWER_CONSUMPTION_SUPPORT is set. This helps devices to sync at better TX/RX rates and improves overall performance. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: edited commit message]
* linux-firmware: set PKG_MIRROR_HASHDaniel Golle2018-09-261-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* linux-firmware: add ath10k supportJohn Crispin2018-09-262-4/+109
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ath10k-firmware: disable the package and use default linux-firmware packageJohn Crispin2018-09-261-7/+7
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mac80211: rebase ontop of v4.18.5John Crispin2018-09-26284-15968/+388
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* netifd: do not validate relevant section when ipv6 is not supportedRosy Song2018-09-252-3/+3
| | | | Signed-off-by: Rosy Song <rosysong@rosinson.com>
* base-files: add network_get_metric() to /lib/functions/network.shFlorian Eckert2018-09-252-1/+6
| | | | | Signed-off-by: Florian Eckert <fe@dev.tdt.de> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* kernel: netfilter: add IPVS kernel module supportMauro Mozzarelli2018-09-241-0/+92
| | | | | | | | | | | | | | | | IPVS (IP Virtual Server) implements transport-layer load balancing inside the Linux kernel, so called Layer-4 switching. IPVS running on a host acts as a load balancer at the front of a cluster of real servers, it can direct requests for TCP/UDP based services to the real servers, and makes services of the real servers to appear as a virtual service on a single IP address. This change adds the following kmod packages - kmod-nf-ipvs - kmod-nf-ipvs-ftp - kmod-nf-ipvs-sip Signed-off-by: Mauro Mozzarelli <mauro@ezplanet.org> Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* ncurses: use default host installAndy Walsh2018-09-241-6/+0
| | | | | | * just use default host/install, so libs/headers get properly generated/installed Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
* gettext-full: host compile with -fpicAndy Walsh2018-09-241-0/+2
| | | | Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
* zram-swap: Shell cosmeticSamuel Casa2018-09-241-4/+4
| | | | Signed-off-by: Samuel Casa <samuel.casa@neratec.com>
* zram-swap: remove trailing whitespaces in init scriptSamuel Casa2018-09-241-2/+2
| | | | | | Signed-off-by: Samuel Casa <samuel.casa@neratec.com> [slightly reword subject] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dante: disable sched_getscheduler() - not implemented in muslDavid Yang2018-09-241-3/+4
| | | | | | | | | | | | | | | | | musl doesn't come with an valid implementation of `sched_getscheduler()`; it simply returns -ENOSYS for it. Without this option (and compile dante with `sched_getscheduler()` enabled), you will get error: serverinit(): sched_getscheduler(2): failed to retrieve current cpuscheduling policy: Function not implemented and dante won't start at all. Ref: http://lists.alpinelinux.org/alpine-devel/3932.html Ref: http://lists.alpinelinux.org/alpine-devel/3936.html Signed-off-by: David Yang <mmyangfl@gmail.com> [slightly reword commit message] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: fix postinstall uci-defaults removalTony Ambardar2018-09-241-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 7f694582 introduced a bug where default_postinst() often fails to remove a uci-defaults script after application, leaving it to run again after a reboot. (Note: commit 7f694582 also introduced FS#1021, now fixed by 73c745f6) The subtle problem arises from the shell logical chain: [ -f "$i" ] && . "$i" && rm -f "$i" Most uci-defaults scripts contain a terminal 'exit 0' statement which, when sourced, results in the logic chain exiting before executing 'rm -f'. This was observed while testing upgrades of 'luci-app-sqm'. The solution is to wrap the shell sourcing in a subshell relative to the command 'rm -f': ( [ -f "$i" ] && . "$i" ) && rm -f "$i" Revert to using 'grep' to prefilter the list of entries from the control file, which yields the full path of uci-defaults scripts. This allows keeping the existence check, directory change and script sourcing inside the subshell, with the script removal correctly outside. This approach avoids adding a second subshell only around the "." (source) command. The change also preserves the fix FS#1021, since the full path is used to source the script, which is POSIX-portable irrespective of PATH variable or reference to the CWD. Run Tested on: LEDE 17.01.4 running ar71xx, while tracing installation of package luci-app-sqm with its associated /etc/uci-defaults/luci-sqm file. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* lldpd: inhibit linking of libbsd on !GLIBCJo-Philipp Wich2018-09-241-0/+4
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* busybox: fix dependency for IPV6Rosy Song2018-09-232-1/+2
| | | | Signed-off-by: Rosy Song <rosysong@rosinson.com>
* layerscape: build ls-dpl package with linux dtc toolYangbo Lu2018-09-221-0/+3
| | | | | | | | | Building ls-dpl package requires the dtc tool. This patch is to support using linux dtc tool for ls-dpl package. This avoids compile issue when host system doesn't have the dtc tool. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: fix get_device_file() function of restoolYangbo Lu2018-09-221-0/+107
| | | | | | | | | | | | | | The restool failed to work with current gcc-7.3.0-musl. This patch is to add a restool fix-up patch to fix multiple problems encountered in the get_device_file() function: - The deprecated atoi() function is replaced by strtoul - An invalid memory access was being performed by using memory from dir->d_name even after closedir(). This is fixed by a strdup() on the device filename. - Also, error prints now print any relevant error code. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>