aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* uboot-mediatek: add build for Ubiquiti Networks UniFi 6 LRDaniel Golle2021-04-094-7/+485
| | | | | | | | | | | | | | | | Add U-Boot build for the Ubiquiti Networks UniFi 6 LR access point. This allows updating the bootchain to modern ARM Trusted Firmware 2.4 and U-Boot 2021.04 while keeping as much of the existing flash layout as possible (u-boot-env, factory and eeprom partitions are retained), gaining robust recovery vs. production dual-boot mechanism. Add info for the Winbond W25Q512JV SPI NOR flash used in the device and wait for GPIOs to settle after reset before checking for reset button. I2C connected LED controller is not supported yet. Writing large amounts of data to SPI flash currently doesn't work due to watchdog timeout causing reset before data write completes. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: increase NOR bl3 sizeDaniel Golle2021-04-091-0/+11
| | | | | | | | Use bl3 size of 0xa0000 instead of 0x80000 in NOR flash. This results in bl3 ending at 0xc0000 which is where the legacy bootchain typically puts U-Boot environment. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: bpi-r64: erase eMMC environment on installationDaniel Golle2021-04-091-1/+1
| | | | | | | Erase U-Boot environment partition on eMMC on installation to make sure chages are applied. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* firmware-utils: bcm4908img: convert into a packageRafał Miłecki2021-04-083-0/+1056
| | | | | | | | | | bcm4908img is a tool managing BCM4908 platform images. It's used for creating them as well as checking, modifying and extracting data from. It's required by both: host (for building firmware images) and target (for sysupgrade purposes). Make it a host/target package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* uboot-envtools: add wrapper scripts for alternate configBjørn Mork2021-04-083-0/+6
| | | | | | | | Now that we can create an alternate configuration file, add two wrapper scripts for simple access to it using the alternate alternate application names `fw_printsys' and `fw_setsys'. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* uboot-envtools: add support for multiple config partitionsBjørn Mork2021-04-083-15/+32
| | | | | | | | | | | | | | | | | | | | | | Most (all?) of the realtek devices have two u-boot config partitions with a different set of variables in each. The U-Boot shell provides two sets of apps to manipulate these: printenv- print environment variables printsys- printsys - print system information variables saveenv - save environment variables to persistent storage savesys - savesys - save system information variables to persistent storage setenv - set environment variables setsys - setsys - set system information variables Add support for multiple ubootenv configuration types, allowing more than one configuration file. Section names are not suitable for naming the different configurations since each file can be the result of multiple sections in case of backup partitions. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* mt76: update to the latest versionFelix Fietkau2021-04-071-3/+3
| | | | | | | | | | | | | | 7d35b7a15d1d mt76: mt7915: add wifi subsystem reset 04122c89749d mt76: fix rx amsdu subframe processing 5e764ec9bece mt76: mt7921: introduce MT_WFDMA_DUMMY_CR definition cf0badbc0497 mt76: mt7921: fix inappropriate WoW setup with the missing ARP informaiton f32a4e15f5b2 mt76: mt7921: fix the dwell time control 54f52771a04a mt76: mt7921: fix kernel crash when the firmware fails to download 97189d2a045b mt76: mt7921: fix the insmod hangs dcdbd7c89cf5 mt76: mt7921: fix MT_PCIE_MAC_INT_ENABLE access 813db729c02f mt76: mt7921: reduce the data latency during hw scan Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-mediatek: update to v2021.04Daniel Golle2021-04-059-79/+8
| | | | | | | | | | Remove patches merged upstream and refresh the remaining ones. Runtime tested on * Bananapi BPi-R64 (eMMC and SD Card) * Linksys E8450 (SPI-NAND) * Ubiquiti UniFi 6 LR (SPI-NOR) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* lldpd: further size reductionsStijn Tintel2021-04-051-2/+2
| | | | | | | | | | | Size difference on mips_4kec: Before: 120196 After: 120006 Closes https://github.com/openwrt/openwrt/pull/3823 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Suggested-by: Lucian Cristian <lucian.cristian@gmail.com>
* lldpd: enable LTOStijn Tintel2021-04-051-1/+4
| | | | | | | | | Size difference on mips_4kec: W/o LTO: 139674 W/ LTO: 120196 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Suggested-by: Lucian Cristian <lucian.cristian@gmail.com>
* lldpd: bump to 1.0.9Stijn Tintel2021-04-052-64/+3
| | | | | | Contains fixes related to CVE-2020-27827. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* lldpd: add libcap dependencyStijn Tintel2021-04-052-19/+2
| | | | | | | | | Now that libcap is in OpenWrt base, we can drop our custom patch to disable libcap support and have lldpd depend on it instead. This will allow the monitor process to drop its privileges instead of running as root, improving security. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* libcap: bump to 2.48Stijn Tintel2021-04-051-2/+2
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* libcap: drop invalid copyright headerStijn Tintel2021-04-051-2/+0
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* libcap: import from packages feedStijn Tintel2021-04-052-0/+126
| | | | | | | | | | | | Having libcap in OpenWrt base allows us to enable libcap support in other packages in base. In lldpd, this would allow the monitor process to drop its privileges instead of running as root, improving security. It will also allow us to drop our patch to disable libcap. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq40xx: add MikroTik hAP ac2 supportRobert Marko2021-04-052-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the MikroTik RouterBOARD RBD52G-5HacD2HnD-TC (hAP ac²), a indoor dual band, dual-radio 802.11ac wireless AP with integrated omnidirectional antennae, USB port and five 10/100/1000 Mbps Ethernet ports. See https://mikrotik.com/product/hap_ac2 for more info. Specifications: - SoC: Qualcomm Atheros IPQ4018 - RAM: 128 MB - Storage: 16 MB NOR - Wireless: · Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 2.5 dBi antennae · Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 2.5 dBi antennae - Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 5x 1000/100/10 port, passive PoE in - 1x USB Type A port Installation: Boot the initramfs image via TFTP and then flash the sysupgrade image using "sysupgrade -n" Signed-off-by: Robert Marko <robimarko@gmail.com>
* uboot-mediatek: bpi-r64: no longer force recovery on first-bootDaniel Golle2021-04-041-4/+4
| | | | | | | | Now that sdcard.gz image contains everything needed to boot straight into production image, no longer force booting into recovery image on first boot by removing the logic which implemented that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt76: update to the latest versionFelix Fietkau2021-04-041-3/+3
| | | | | | | | | | | | | | | | 465dda65ee84 mt7615,mt7915: replace fw log 0-terminating code with wiphy info length limit 62b13f5352b8 mt76: mt7921: fix key set/delete issue 0ff3a336a8d8 mt7615,mt7915: fix a compiler warning 113ba8a81d54 mt76: mt7615: remove redundant dev_err call in mt7622_wmac_probe() be1ab3b9ae7c mt76: mt7921: fix typo in mt7921_pci_resume 4e22f0dc934b mt76: mt7915: fix txpower init for TSSI off chips e66a0b9b8d66 mt76: mt7615: always wake the device in mt7615_remove_interface 38f656768a90 mt76: mt7921: always wake the device in mt7921_remove_interface 6ee4770de083 mt76: mt7921: rework mt7921_mcu_debug_msg_event routine e578b4b8d56a mt76: mt7615: fix .add_beacon_offload() f8c6c7cbf10f mt76: mt7915: fix mt7915_mcu_add_beacon Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to Git version 2021-04-03Hauke Mehrtens2021-04-031-3/+3
| | | | | | | f8899b9 netifd: bridge: set default value for igmp_snoop 327da98 netifd: add possibility to switch off route config Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uclient: update to Git version 2021-04-03Hauke Mehrtens2021-04-031-3/+3
| | | | | | | 83efca2 tests: fix possibly longer start of HTTP server 64e00d6 uclient-fetch: document missing options Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: enable airtime policy for the -basic variantsRui Salvaterra2021-04-031-1/+1
| | | | | | | | | | | | | | Airtime policy configuration is extremely useful in multiple BSS scenarios. Since nowadays most people configure both private and guest networks (at least), it makes sense to enable it by default, except for the most limited of the variants. Size of the hostapd-basic-openssl binary (mipsel 24Kc -O2): 543944 bytes (airtime policy disabled) 548040 bytes (airtime policy enabled) Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Acked-by: Daniel Golle <daniel@makrotopia.org>
* zram-swap: bail out early if the kernel doesn't support swapRui Salvaterra2021-04-031-0/+5
| | | | | | | | Since KERNEL_SWAP is only enabled by default for !SMALL_FLASH targets, we need to check if the current kernel supports swap before trying to configure zram-swap, as opkg can't check for kernel dependencies. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* zram-swap: clean up the makefileRui Salvaterra2021-04-031-3/+9
| | | | | | | Break dependencies into separate lines, to improve the readability. Trim trailing whitespace. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* lantiq: use ActualNetDataRate for speed reportingJeroen Peelaerts2021-04-032-1/+6
| | | | | | | | | | | | | Switch to Actual Net Data Rate (ACTNDR) for speed reporting on lantiq VDSL modems Refer to ITU-T G.997.1 chapter 7.5.2.8 Independent whether retransmission is used or not in a given transmit direction: - In L0 state, this parameter reports the Net Data Rate (as specified in G.992.3, G.992.5 or G.993.2) at which the bearer channel is operating. - In L2 state, the parameter contains the Net Data Rate (as specified in G.992.3, G.992.5 or G.993.2) in the previous L0 state. Signed-off-by: Jeroen Peelaerts <jeroen.peelaerts@gmail.com> Reviewed-by: Andre Heider <a.heider@gmail.com>
* lantiq: enable G.INP retransmission countersJeroen Peelaerts2021-04-032-3/+7
| | | | | | | | | | | | | | | | This commit adds monitoring for a couple of DSL line features that are present in the lantiq firmware blobs. * G.INP ON/OFF * Trellis encoding ON/OFF * Virtaul Noise ON/OFF * Bitswap ON/OFF Difference in size for ltq-vdsl-app = 1k Difference in size for kmod-ltq-vdsl-vr9 < 1k Reviewed-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jeroen Peelaerts <jeroen.peelaerts@gmail.com>
* base-files: fix status display commandAlexander Egorenkov2021-04-031-1/+1
| | | | | | | | | | | | | | | | | | | | If service() is called w/o parameter then the status display for services with multiple instances is incorrect. E.g. samba4 or wpad have 2 instances. root@OpenWrt:~# /etc/init.d/samba4 status running root@OpenWrt:~# /etc/init.d/wpad status running Before change: /etc/init.d/samba4 enabled stopped /etc/init.d/wpad enabled stopped After change: /etc/init.d/samba4 enabled running /etc/init.d/wpad enabled running Signed-off-by: Alexander Egorenkov <egorenar-dev@posteo.net>
* iproute2: fix libbpf detection with NLS enabledTony Ambardar2021-04-032-1/+21
| | | | | | | | | | | | | | | | | Upstream iproute2 detects libbpf using a one-line $CC test-compile, which normally ignores LDFLAGS. With NLS enabled however, LDFLAGS includes an "rpath-link" linker option needed to resolve libintl.so. Its absence causes both the compile and libbpf detection to fail: ld: warning: libintl.so.8, needed by libbpf.so, not found (try using -rpath or -rpath-link) ld: libelf.so.1: undefined reference to `libintl_dgettext' collect2: error: ld returned 1 exit status Fix this by directly including $LDFLAGS in the test-compile command. Reported-by: Ian Cooper <iancooper@hotmail.com> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* binutils: fix libbfd missing DSO dependency if NLS enabledTony Ambardar2021-04-031-2/+4
| | | | | | | | | | | | | | | | | | | | | | | The libbfd package definition uses $(ICONV_DEPENDS) and $(INTL_DEPENDS) but links against neither, leading to libbfd detection failures in other packages (e.g. bpftools) and on-target relocation problems with libintl.so: root@OpenWrt:/# ldd /usr/lib/libbfd.so ldd (0x77db6000) libc.so => ldd (0x77db6000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x77c6d000) Error relocating /usr/lib/libbfd.so: libintl_dgettext: symbol not found Add NLS-conditional linking of "libintl" to fix this. Also remove libbfd package dependency $(ICONV_DEPENDS) which is not used during building or linking. Tested with QEMU on malta/be32, after building all packages from binutils, bpftools and iproute2, using different libc options musl and glibc. Fixes: 08e817569630 ("binutils: use nls.mk to fix libbfd link errors in other packages") Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* bpftools: drop unneeded libintl linking for NLSTony Ambardar2021-04-031-5/+1
| | | | | | | | There is no direct linking of libintl from bpftools, only secondary linking through libelf, so remove "-lintl" from TARGET_LDFLAGS. Fixes: 5582fbd6135f ("bpftools: support NLS, fix ppc build and update to 5.8.9") Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* firewall4: update to latest Git HEADJo-Philipp Wich2021-04-011-3/+3
| | | | | | | | | | | | | 29fba84 tests: expand testing 6bf82a8 fw4.uc: fix family test functions 25b2c7d fw4.uc: fix parsing boolean "0" values 694d428 rule.uc: fix redundant whitespace in rules without target 7f69fbb ruleset.uc: reduce empty lines in output 8f8e42c fw4.uc: gracefully handle missing defaults section 25287af treewide: remove ucode module preloading 802b685 fw4.uc: remove upvalue caching Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ucode: update to latest Git HEADJo-Philipp Wich2021-04-011-3/+3
| | | | | | | | 973cc6c compiler: actually expand block scope fix to for/while alt syntax 97bf297 compiler: ensure that alternative if/for/while syntax has own block scope f0e2a64 tests: add missing test case for fixed switch codegen Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uboot-mediatek: adapt root= cmdline arg for bpi-r64Daniel Golle2021-03-311-2/+2
| | | | | | Adapt to FIT partition parser changes. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: functions: introduce new helper functionsDaniel Golle2021-03-312-63/+68
| | | | | | | | | | | Introduce cmdline_get_var() to /lib/function.sh and make use of it in export_rootdev() in /lib/upgrade/common.sh, making the code more simple and removing one level of indentation. Introduce get_partition_by_name() to /lib/upgrade/common.sh which is useful on non-EFI GPT platforms like mt7622. Remove some dead-code while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* netifd: update to git HEADDaniel Golle2021-03-311-3/+3
| | | | | | | | | | 09632d4 device: remove left-over comment b22f83d handler: add mechanism to generate external device handler stubs 80bf9d7 extdev: add support for external device handlers 44c0f40 system-linux: reorder sysctl functions c84f3b0 system-linux: add device options used by wpad Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* firewall: update to latest git HEADHans Dedecker2021-03-301-3/+3
| | | | | | | a4355a6 firewall3: clean up the flow table detection logic edd0dc5 firewall3: create a common helper to find strings in files Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ncurses: add screen-256color terminfoPaul Spooren2021-03-291-1/+2
| | | | | | | The terminfo is required by the popular terminal multiplexer screen and tmux, offer it by default as the size impact is minimal with 885 Bytes. Signed-off-by: Paul Spooren <mail@aparcar.org>
* ncurses: split long line of supported terminfoPaul Spooren2021-03-291-1/+12
| | | | | | | The terminfo files were all in one row which is terrible to read. Split them over multiple lines to improve readability. Signed-off-by: Paul Spooren <mail@aparcar.org>
* ucode: update to latest Git HEADJo-Philipp Wich2021-03-291-3/+3
| | | | | | | | | | | | | | | | | | | aa9621d compiler: rework switch statement code generation b5f0de1 vm: add trace mode instruction dump output fixes 0341d64 vm: fix another for-loop memory leak 00d9419 vm: fix further memory leaks in trace mode 20a3763 vm: fix loop variable memory leak in NEXTK/NEXTKV instruction 9a6ef2b lib: prevent use-after-free after uc_shift() 03f1324 object: free prototype object when registering existing ressource type b3d758b compiler: fix for/break miscompilation 86e3970 lib: fix value refcount of uc_unshift() return value fe464ea run_tests.sh: allow passing tests to run as arguments 091ae1b compiler: fix another try/catch miscompilation fcedb19 lib: fix passing uninitialized memory to sigprocmask() 0d0357d vm: fix leaking source context strings in trace mode 7a41fb3 lib: use execvp() in system() Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mac80211: merge a few pending tx related fixesFelix Fietkau2021-03-283-0/+142
| | | | | | Improve performance and fix potential mgmt tx hangs/warnings Signed-off-by: Felix Fietkau <nbd@nbd.name>
* firewall3: update to latest git HEADTony Ambardar2021-03-271-3/+3
| | | | | | | | | | | | | | | This includes several improvements and fixes: 61db17e rules: fix device and chain usage for DSCP/MARK targets 7b844f4 zone: avoid duplicates in devices list c2c72c6 firewall3: remove last remaining sprintf() 12f6f14 iptables: fix serializing multiple weekdays 00f27ab firewall3: fix duplicate defaults section detection e8f2d8f ipsets: allow blank/commented lines with loadfile 8c2f9fa fw3: zones: limit zone names to 11 bytes 78d52a2 options: fix parsing of boolean attributes Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* mt76: update to the latest versionFelix Fietkau2021-03-261-3/+3
| | | | | | | | | | | | | | | | | | | | | 6886b57a1534 mt76: connac: introcuce mt76_sta_cmd_info data structure e529e8afe22a mt76: mt7921: properly configure rcpi adding a sta to the fw e4d522776804 mt76: mt7921: fix airtime reporting be2f67e8d3cb mt76: mt7915: fix key set/delete issue 09a1befde4b7 mt76: fix potential DMA mapping leak f66f8f41d47b mt76: mt7915: refresh repeater entry MAC address when setting BSSID 035e2f6f1ddf mt76: mt7921: get rid of mt7921_mac_wtbl_lmac_addr ee29cd5f3a6a mt76: mt7615: only enable DFS test knobs for mt7615 9a98b1a6f9c2 mt76: mt7615: cleanup mcu tx queue in mt7615_dma_reset() 3bd285424e7b mt76: mt7622: trigger hif interrupt for system reset bf6d9ee4acd1 mt76: mt7615: keep mcu_add_bss_info enabled till interface removal 115b74282314 mt76: mt7915: keep mcu_add_bss_info enabled till interface removal 57432e701d1a mt76: mt7915: cleanup mcu tx queue in mt7915_dma_reset() a519c49a6a42 mt76: mt7615: 0-terminate firmware log messages 4a22f2ffae2e mt76: mt7915: 0-terminate firmware log messages b8609066893a mt76: mt7615: fix chip reset on MT7622 and MT7663e Signed-off-by: Felix Fietkau <nbd@nbd.name>
* openssl: bump to 1.1.1kEneas U de Queiroz2021-03-262-25/+24
| | | | | | | | | | | | This version fixes 2 security vulnerabilities, among other changes: - CVE-2021-3450: problem with verifying a certificate chain when using the X509_V_FLAG_X509_STRICT flag. - CVE-2021-3449: OpenSSL TLS server may crash if sent a maliciously crafted renegotiation ClientHello message from a client. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* Revert "openssl: refresh patches"Kevin Darbyshire-Bryant2021-03-2611-2498/+180
| | | | | | This reverts commit e27ef2da0d513494c3e9926ce8d44b63e4236a32. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* openssl: refresh patchesKevin Darbyshire-Bryant2021-03-2611-180/+2498
| | | | | | Tidy up some patch fuzz. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* elfutils: enable building with MIPS16Tony Ambardar2021-03-251-2/+2
| | | | | | | | | | | | | | | | | | Building with MIPS16 was disabled in 2013 due to an issue with GCC TLS: https://dev.archive.openwrt.org/ticket/13572. But after the problematic GCC version was retired, this change wasn't revisited. Re-enable MIPS16 builds to reduce average elfutils library sizes ~10%. This was compile-tested on malta/mips32be and malta/mips32le, and linked with iproute2 for run-testing. Package sizes follow: Library MIPS16:=0 MIPS16:=1 ------- --------- --------- libelf1 43217 37492 libasm1 12481 11658 libdw1 229723 205793 Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* mwlwifi: add PKG_FLAGS:=nonsharedDaniel Golle2021-03-241-0/+1
| | | | | | | This should fix the problem of mwlwifi-firmware-* not being found when using the ImageBuilder. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ucode: fix PKG_MIRROR_HASHDaniel Golle2021-03-241-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* packages: kernel: add gpio-nxp-74hc153Mauri Sandberg2021-03-223-0/+327
| | | | | | | | | | | | | | | | | | | | NXP 74HC153 is a GPIO expander. Its original source cide sits in ar71xx architecture tree. It has been slightly modified to get GPIO pin configuration from the device tree rather than a MACH file. Changes to the source file: - Remove struct nxp_74hc153_config - in nxp_74hc153_probe(), fetch GPIO configuration from device tree - allow GPIO framework decide the base number by passing -1 to it - remove support for kernel versions below 4.5.0 - add OF device compatibility string Create a package for inclusion in image. References: https://lore.kernel.org/linux-gpio/545111184.50061.1615922388276@ichabod.co-bxl/ Signed-off-by: Mauri Sandberg <sandberg@mailfence.com> [added link to driver usptreaming work in progress] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* igmpproxy: remove packageJan Pavlinec2021-03-213-221/+0
| | | | | | | | | Moved to packages repo because it was considered non-essential for most router configurations. Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz> [shorten commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: add logging for configuration importFlorian Eckert2021-03-211-0/+1
| | | | | | Make sysupgrade backup import more verbose. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 22:14:24 +0000