aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* procd: update to git HEADDaniel Golle2021-11-231-3/+3
| | | | | | | | | 8de12de system: add diskfree infos to ubus bf3fe0e service: move jail parsing to end of instance parser 87b5836 procd: add full service shutdown prior to sysupgrade 01ac2c4 procd: service_stop_all: also kill inittab actions Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* qosify: update to the latest versionFelix Fietkau2021-11-221-3/+3
| | | | | | 06872673c10f map: allow referring to a class index directly in tcp/udp default entries Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qosify: install hotplug handler into /etc/hotplug.d/iface as wellFelix Fietkau2021-11-221-1/+9
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-11-221-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 5dd32475c859 mt76: mt7915: get rid of mt7915_mcu_set_fixed_rate routine f5cfaaff3dd1 mt76: mt7921: drop offload_flags overwritten f5ad840ca5c0 mt76: mt7615: fix possible deadlock while mt7615_register_ext_phy() 29a8a08827b1 mt76: mt7921: fix MT7921E reset failure f44685f2faee mt76: mt7915: fix return condition in mt7915_tm_reg_backup_restore() ae8e02ddd2b0 mt76: mt7915: fix SMPS operation fail e814e15716b0 mt76: reverse the first fragmented frame to 802.11 c9bca3ed9566 mt76: mt7915: fix NULL pointer dereference in mt7915_get_phy_mode dd054b7e16e7 mt76: only set rx radiotap flag from within decoder functions f1520c9bb332 mt76: mt7915: add default calibrated data support 0c489ea2865a mt76: testmode: add support to set MAC 91c5da3d0a7c mt76: mt7921: add support for PCIe ID 0x0608/0x0616 ca39b4bbc227 mt76: debugfs: fix queue reporting for mt76-usb 00b6f497e2e8 mt76: mt7921: introduce 160 MHz channel bandwidth support c1574466c733 mt76: fix possible OOB issue in mt76_calculate_default_rate 9680a17b0aed mt76: mt7921: fix possible NULL pointer dereference in mt7921_mac_write_txwi 78fc0dcdcef0 mt76: connac: fix a theoretical NULL pointer dereference in mt76_connac_get_phy_mode 05953e7d6fe7 mt76: mt7615: remove dead code in get_omac_idx 39f6c37127c1 mt76: connac: remove PHY_MODE_AX_6G configuration in mt76_connac_get_phy_mode 526591b203f3 mt76: do not pass the received frame with decryption error 256789bb400f mt76: fix the wiphy's available antennas to the correct value fa187f5cf068 mt76: fix timestamp check in tx_status 11ebf11a3587 mt76: mt7915: fix the wrong SMPS mode 8c69b815ee7f mt76: mt7921: honor mt76_connac_mcu_set_rate_txpower return value in mt7921_config bc6798f729f9 mt76: move sar utilities to mt76-core module b1d0ad2e74fe mt76: mt76x02: introduce SAR support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: set beamformer/beamformee number of antennas in VHT capsFelix Fietkau2021-11-221-0/+16
| | | | | | Without this, beamforming is probably not working Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uqmi: update to git HEADDaniel Golle2021-11-221-3/+3
| | | | | | | 20cd907 uqmi: use unmodified upstream JSON files b2c53dc command-nas: fix out-of-bounds read Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* qosify: add support for configuring overheadFelix Fietkau2021-11-212-1/+41
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qosify: update to the latest versionFelix Fietkau2021-11-211-3/+3
| | | | | | 2743e58741b3 bpf: work around a verifier issue Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ethtool: update to version 5.15Hans Dedecker2021-11-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | cef54c4 Release version 5.15. 23beb39 update UAPI header copies fd7db64 netlink: settings: Correct duplicate condition 88892ec Merge branch 'review/module-fixes-2-v2' 79cb4ab sff-8636: Remove extra blank lines 128e97c sff-8636: Convert if statement to switch-case 7ff603b sff-8636: Fix incorrect function name 86e9784 sff-8636: Remove incorrect comment 001aecd cmis: Correct comment 1bad83c cmis: Fix wrong define name 2c2fa88 cmis: Fix CLEI code parsing d007b49 Merge branch 'review/module-fixes' into master a7431bc netlink: eeprom: Fix compilation when pretty dump is disabled d02409c ethtool: Fix compilation warning when pretty dump is disabled 2ddb1a1 netlink: eeprom: Fallback to IOCTL when a complete hex/raw dump is requested 7e153a7 cmis: Fix invalid memory access in IOCTL path 769a50e sff-8636: Fix parsing of Page 03h in IOCTL path Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* fstools: update to git HEADDaniel Golle2021-11-201-3/+3
| | | | | | 77c0288 fstools: fix a couple of minor code problems Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* nftables: install libnftables to staging dirDaniel Danzberger2021-11-201-1/+7
| | | | | | Makes libnftables library and headers available for other packages. Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
* kernel: add kmod-usb-net-smsc75xxMarius Durbaca2021-11-201-0/+16
| | | | | | add kernel module for smsc75xx based USB 2.0 Gigabit Ethernet devices Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
* omap: update u-boot to 2021.07Andre Heider2021-11-201-2/+2
| | | | Signed-off-by: Andre Heider <a.heider@gmail.com>
* gettext: remove packageRosen Penev2021-11-2011-1403/+0
| | | | | | | This package was necessary when uClibc was in the tree. Now that uClibc is gone, this can go too. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* linux-firmware: add firmware for intel ax200Nian Bohung2021-11-201-0/+7
| | | | Signed-off-by: Nian Bohung <n0404.n0404@gmail.com>
* cypress-nvram: fix firmware is not exist for raspberry pi compute 4Nian Bohung2021-11-201-0/+3
| | | | | | Fix file "brcmfmac43455-sdio.raspberrypi,4-compute-module.txt" is not exist. Signed-off-by: Nian Bohung <n0404.n0404@gmail.com>
* pcre: bring back C++ bindingsRosen Penev2021-11-201-2/+15
| | | | | | | It seems some people use them privately. Reported-by: Jan Kardell <jan.kardell@telliq.com> Signed-off-by: Rosen Penev <rosenp@gmail.com>
* readline: disable shared library for hostRosen Penev2021-11-201-0/+1
| | | | | | | | | Allows to avoid rpath hacks with at least softethervpn. --with-pic is needed as it's not default with static libraries, only shared ones. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libjson-c: don't build shared host librariesRosen Penev2021-11-201-3/+1
| | | | | | Avoids having to deal with various rpath hacks. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: add kmod-ledtrig-patternKarel Kočí2021-11-201-0/+16
| | | | | | | This allows LEDs to be triggered by custom pattern and not just predefined ones. Signed-off-by: Karel Kočí <karel.koci@nic.cz>
* libubox: update to git HEADDaniel Golle2021-11-201-4/+4
| | | | | | | | | cce5e35 vlist: define vlist_for_each_element_safe This is change affects only a macro in headers and hence it is not required to bump ABI_VERSION. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* qosify: add qosify-status scriptFelix Fietkau2021-11-192-1/+74
| | | | | | This will show detailed status for all devices/interfaces Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qosify: add class specific bulk flow detection example to voice classFelix Fietkau2021-11-191-0/+3
| | | | | | | With the new version, priority/bulk flow detection can be selectively enabled and configured per class Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qosify: update to the latest versionFelix Fietkau2021-11-193-16/+24
| | | | | | | | | | | | | 68961a555e42 ubus: drop dnsmasq check for dns_result method 1ca3e26b8169 bpf: refactor code to support explicit opt-in for bulk+prio detection 3f0acf039f41 bpf: move flow prio/bulk detection config into a separate data structure bc54c97e3333 map, bpf: create a separate map for configured dscp classes 46cf3eae2d99 bpf: fix bulk flow detaction 88f1db7dd611 bpf: fix priority flow detection b5dec7874373 bpf: remove access to skb->gso_size e728a319a9a5 interface: unify status, always include ifname, ingress, egress Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bpf-headers: switch to mips64 for 64 bit targetsFelix Fietkau2021-11-191-0/+6
| | | | | | | | BTF pointer data has a different size on 32 vs 64 bit targets, and while the generated eBPF code works, the BTF data fails to validate on mismatch Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qosify: keep ICMP in the default best-effort classFelix Fietkau2021-11-191-1/+1
| | | | | | | Also preserve existing DSCP tags to make it easier to test latency for different DSCP values Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qosify: move package to Base SystemRodrigo B. de Sousa Martins2021-11-191-2/+2
| | | | | | | | Since sqm-scripts and qos-scripts packages are in the same category as qosify, the firsts being in the Base System category, I find it understandable to move the latter to Base System instead of network section. Signed-off-by: Rodrigo B. de Sousa Martins <rodrigo.sousa.577@gmail.com>
* hostapd: fix use after free bugsDavid Bauer2021-11-191-6/+6
| | | | | | | Using a pointer one lifter after it freed is not the best idea. Let's not do that. Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: fix IBSS/adhoc mode for brcmfmacBastian Bittorf2021-11-191-0/+1
| | | | | | | | | | | | | | | | | | | | On systems using brmcfmac (e.g. Raspberry Pi Zero W) without this fix, the final setup-call: iw dev wlan0 ibss join ... fails with returncode 161 and message: "command failed: Not supported (-95)" So this patch calls an explicit: iw dev wlan0 set type ibss just prior to the 'ibss join' command. I have tested several ath9k and mt76xx devices with different revisions: this patch does not harm. please also apply to stable branch. Signed-off-by: Bastian Bittorf <bb@npl.de>
* ltq-vdsl-fw: update w921v firmware download URLDaniel Golle2021-11-153-5/+5
| | | | | | | Update Telekom Speedport W921V firmware download URL. Contained TAPI and VDSL firmware blobs are identical. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: set VARIANT=* for wpa-cli, hostapd-utilsEneas U de Queiroz2021-11-151-0/+2
| | | | | | | | | | | | | | | | | | | | 19aae94 [build: avoid rebuilds of unset VARIANT packages] builds packages defined without a VARIANT only once, using the first VARIANT defined in the Makefile. This caused problems with wpa-cli, as it is only built for variants that include supplicant support, and the first VARIANT defined may not build it. The same happens to hostapd-utils, which is not built for supplicant-only variants. To circumvent this, set VARIANT=* for both packages so that they get built for every defined variant. This should not cause spurious rebuilds, since tey are not a dependency of any other package defined in this Makefile. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* lldpd: add reload triggerStijn Tintel2021-11-142-1/+5
| | | | | | | This is needed to reload the service when calling reload_config, if the UCI config has changed. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* lldpd: consolidate procd command linesStijn Tintel2021-11-142-3/+2
| | | | | | There is no need to have multiple lines for this. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* lldpd: bump to 1.0.13Stijn Tintel2021-11-141-2/+2
| | | | | | Fixes CVE-2021-43612. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* uboot-lantiq: reduce stack sizeMathias Kresin2021-11-141-0/+56
| | | | | | | | | | | | | | | On lantiq a lot of stuff expects to be loaded to and executed at 0x80002000, including our own second stage bootloader. For all build u-boots, the initial stack pointer is at 0x80008000. After loading data to 0x80002000, every further stack operation corrupts the loaded code. Set the initial stack pointer to 0x80002000, to not overwrite code loaded in memory. A stack of 0x2000 bytes has been proven as enough in all done tests. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: danube: fix SPL bootMathias Kresin2021-11-141-0/+34
| | | | | | | | | | | | | | | | On danube we only have 0x6800 bytes of usable SRAM. Everything behind can't be written to and a SPL u-boot locks up during boot. Since it's a hard to debug issue and took me more than two years to fix it, I consider it worth to include fix albeit SPL u-boots are not build in OpenWrt. I faced the issue while trying to shrink the u-boot to 64K since some boards only have an u-boot partition of that size from the days ifx-uboot was used. Signed-off-by: Mathias Kresin <dev@kresin.me> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* uboot-lantiq: fix out of bounds cache invalidateMathias Kresin2021-11-141-0/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With gcc10 the variables are placed more tightly to each other, which uncovers a long existing bug in the lantiq DMA code. It can be observed when using tftpboot with the filename parameter, which gets reset during the tftpboot execution. NetRxPackets[] points to cache line size aligned addresses. In ltq_eth_rx_packet_align() the address NetRxPackets[] points to is increased by LTQ_ETH_IP_ALIGN and the resulting not cache aligned address is used further on. While doing so, the length/size is never updated. The "not cache aligned address" + len/size for a cache aligned address is passed to invalidate_dcache_range(). Hence, invalidate_dcache_range() invalidates the next 32 bit as well, which flashes the BootFile variable as well. variable BootFile is at address: 0x83ffe12c NetRxPackets[] points to 0x83ffdb20 (len is 0x600) data points to: 0x83ffdb22 (len is 0x600) ltq_dma_dcache_inv: 0x83ffdb22 (for len 0x600) invalidate_dcache_range: 0x83ffdb20 to 0x83ffe120 (size: 32) invalidate_dcache_range: 0x83ffdb20 to 0x83ffdb40 (Bootfile: a.bin) ... invalidate_dcache_range: 0x83ffe100 to 0x83ffe120 (Bootfile: a.bin) invalidate_dcache_range: 0x83ffe120 to 0x83ffe140 (Bootfile: ) In ltq_dma_tx_map() and ltq_dma_rx_map() the start address passed to ltq_dma_dcache_wb_inv() is incorrect. By considering the offset, the start address passed to flush_dcache_range() is always aligned to 32, 64 or 128 bytes dependent on configured DMA burst size. Fixes: FS#4113 Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: danube: fix hanging lzma kernel uncompressionMathias Kresin2021-11-141-0/+48
| | | | | | | | | | | | | | | | | | | | | | | At least since gcc 7.3.0 (OpenWrt 18.06) lwr/lwl are used in the assembly of LzmaProps_Decode. While the decission made by the compiler looks perfect fine, it triggers some obscure hang on lantiq danube-s v1.5 with MX29LV640EB NOR flash chips. Only if the offset 1 is used, the hang can be observed. Using any other offset works fine: lwl s0,0(a1) - s0 == 0x6d000080 lwl s0,1(a1) - hangs lwl s0,2(a1) - s0 == 0x0080xxxx lwl s0,3(a1) - s0 == 0x80xxxxxx It isn't clear whether it is a limitation of the flash chip, the EBU or something else. Force 8bit reads to prevent gcc optimizing the read with lwr/lwl instructions. Signed-off-by: Mathias Kresin <dev@kresin.me>
* qosify: add missing alias support in the init scriptFelix Fietkau2021-11-141-0/+18
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq40xx: add support for P&W R619AC (aka G-DOCK 2.0)Richard Yu2021-11-142-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | P&W R619AC is a IPQ4019 Dual-Band AC1200 router. It is made by P&W (p2w-tech.com) known as P&W R619AC but marketed and sold more popularly as G-DOCK 2.0. Specification: * SOC: Qualcomm Atheros IPQ4019 (717 MHz) * RAM: 512 MiB * Flash: 16 MiB (NOR) + 128 MiB (NAND) * Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN) * Wireless: - 2.4 GHz b/g/n Qualcomm Atheros IPQ4019 - 5 GHz a/n/ac Qualcomm Atheros IPQ4019 * USB: 1 x USB 3.0 * LED: 4 x LAN, 1 x WAN, 2 x WiFi, 1 x Power (All Blue LED) * Input: 1 x reset * 1 x MicroSD card slot * Serial console: 115200bps, pinheader J2 on PCB * Power: DC 12V 2A * 1 x Unpopulated mPCIe Slot (see below how to connect it) * 1 x Unpopulated Sim Card Slot Installation: 1. Access to tty console via UART serial 2. Enter failsafe mode and mount rootfs <https://openwrt.org/docs/guide-user/troubleshooting/failsafe_and_factory_reset> 3. Edit inittab to enable shell on tty console `sed -i 's/#ttyM/ttyM/' /etc/inittab` 4. Reboot and upload `-nand-factory.bin` to the router (using wget) 5. Use `sysupgrade` command to install Another installation method is to hijack the upgrade server domain of stock firmware, because it's using insecure http. This commit is based on @LGA1150(at GitHub)'s work <https://github.com/LGA1150/openwrt/commit/a4932c8d5a275d1fb4297bd20ec03f9270a45d1c> With some changes: 1. Added `qpic_bam` node in dts. I don't know much about this, but I observed other dtses have this node. 2. Removed `ldo` node under `sd_0_pinmux`, because `ldo` cause SD card not working. This fix is from <https://github.com/coolsnowwolf/lede/commit/51143b4c7571f717afe071db60bbb4db1532cbf2> 3. Removed the 32MB NOR variant. 4. Removed `cd-gpios` in `sdhci` node, because it's reported that it makes wlan2g led light up. 5. Added ethphy led config in dts. 6. Changed nand partition label from `rootfs` to `ubi`. About the 128MiB variant: The stock bootloader sets size of nand to 64MiB. But most of this devices have 128MiB nand. If you want to use all 128MiB, you need to modify the `MIBIB` data of bootloader. More details can be found on github: <https://github.com/openwrt/openwrt/pull/3691#issuecomment-818770060> For instructions on how to flash the MIBIB partition from u-boot console: <https://github.com/openwrt/openwrt/pull/3691#issuecomment-819138232> About the Mini PCIe slot: (from "ygleg") "The REFCLK signals on the Mini PCIe slot is not connected on this board out of the box. If you want to use the Mini PCIe slot on the board, you need to (preferably) solder two 0402 resistors: R436 (REFCLK+) and R444 (REFCLK-)..." This and much more information is provoided in the github comment: <https://github.com/openwrt/openwrt/pull/3691#issuecomment-968054670> Signed-off-by: Richard Yu <yurichard3839@gmail.com> Signed-off-by: DENG Qingfang <dqfext@gmail.com> [Added comment about MIBIB+128 MiB variant. Added commit message section about pcie slot. Renamed gpio-leds' subnodes and added color, function+enum properties.] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* firewall4: update to latest Git HEADPaul Spooren2021-11-131-4/+4
| | | | | | | | | eb0a3ee fw4.uc: Do not quote port ranges c5a8e3e tests: adapt test to new ICMP print logic Also start using $(AUTORELEASE) Signed-off-by: Paul Spooren <mail@aparcar.org>
* base-files: stage2: improve /proc/*/stat parserDaniel Golle2021-11-131-2/+5
| | | | | | | | | | | Simply reading /proc/*/stat as a space-separated string will not work as the process name may itself contain spaces. Hence we must match on the '(' and ')' characters around the process name and can then handle the remaining string as space-separated values. This fixes shell error messages which have been popping up the console due to spaces in process names being interpreted as field separators. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: Fix deadlock when configuring wifiHauke Mehrtens2021-11-131-7/+9
| | | | | | | | | | | | | | | | | | | | | The nl80211_set_wiphy() function was changed between kernel 5.11 and 5.12 to take the rdev->wiphy lock which should be freed at the end again. The 500-mac80211_configure_antenna_gain.patch added some code which just returned in some cases without unlocking. This resulted in a deadlock with brcmfmac. This patch fixes this by also jumping to the out label in case we want to leave the function. This fixes a hanging system when brcmfmac is in use. I do not know why we do not see this with other driver. The kernel returns very useful debug details when setting these OpenWrt configuration options: CONFIG_KERNEL_DETECT_HUNG_TASK=y CONFIG_KERNEL_PROVE_LOCKING=y Fixes: FS#4122 Fixes: b96c2569ac76 ("mac80211: Update to version 5.12.19-1") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* iproute2: update to 5.15Russell Senior2021-11-132-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | from https://git.kernel.org/pub/scm/network/iproute2/iproute2.git changes since 5.14.0: ad3a118f rdma: Fix SRQ resource tracking information json 7a235a10 man: devlink-port: fix pfnum for devlink port add 229eaba5 uapi: pickup fix for xfrm ABI breakage a500c5ac lib/bpf: fix map-in-map creation without prepopulation 7c032cac man: devlink-port: remove extra .br 04ee8e6f man: devlink-port: fix style 14802d84 man: devlink-port: fix the devlink port add synopsis 897772a7 cmd: use spaces instead of tabs for usage indentation e7a98a96 mptcp: unbreak JSON endpoint list 2f5825cb lib: bpf_legacy: fix bpffs mount when /sys/fs/bpf exists d756c08a tc/f_flower: fix port range parsing 92e32f77 uapi: updates from 5.15-rc1 e7e0e2ce iptuntap: fix multi-queue flag display deef844b man: ip-link: remove double of a3272b93 configure: restore backward compatibility ceba5930 tree-wide: fix some typos found by Lintian 7a705242 ip: remove leftovers from IPX and DECnet 8ab1834e uapi: update headers from 5.15 merge 6d0d35ba ip/bond: add lacp active support 926ad641 Update kernel headers c730bd0b ip/tunnel: always print all known attributes df8912ed ipioam6: use print_nl instead of print_null 7e7270bb tc/skbmod: Introduce SKBMOD_F_ECN option 86c596ed IOAM man8 2d83c710 New IOAM6 encap type for routes f0b3808a Add, show, link, remove IOAM namespaces and schemas acbdef93 Import ioam6 uapi headers 2d6fa30b Update kernel headers 508ad89c ipneigh: add support to print brief output of neigh cache in tabular format * update patch 170-ip_tiny.patch to accomodate ioam. Signed-off-by: Russell Senior <russell@personaltelco.net>
* qosify: add default alias sectionsFelix Fietkau2021-11-121-1/+13
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qosify: update to the latest versionFelix Fietkau2021-11-121-3/+3
| | | | | | | | 0750f2b4d329 README: dnsmasq integration is complete 8e48d0b0cbba bpf: add initial support for splitting map dscp value into ingress and egress bfc2cafe2a8c map: add support for defining aliases Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dnsmasq: fix the dynamic dns object names patchRui Salvaterra2021-11-121-7/+7
| | | | | | | | | We can't use booleans, since we're not including stdbool.h. Use integers instead. Fixes: 0b79e7c01e ("dnsmasq: generate the dns object name dynamically") Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* dnsmasq: add ubus acl to allow calls to hotplug.tftp objectDaniel Golle2021-11-121-0/+3
| | | | | | | | dnsmasq may call hotplug.dhcp, hotplug.neigh and hotplug.tftp. Only the first two callees were listed in the ACL, so add missing hotplug.tftp. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to git HEADDaniel Golle2021-11-111-3/+3
| | | | | | | | | | 9d1431e jail: allow passing environment variable to procd jailed process Fixes dnsmasq in ujail which needs USER_SCRIPT env variable to be passed to jailed process. Reported-by: Bastian Bittorf <bb@npl.de> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: fix queue selection issueFelix Fietkau2021-11-101-0/+37
| | | | | | | | | When __ieee80211_select_queue is called, skb->cb has not been cleared yet, which means that info->control.flags can contain garbage. In some cases this leads to IEEE80211_TX_CTRL_DONT_REORDER being set, causing packets marked for other queues to randomly end up in BE instead. Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-27 17:59:38 +0000