aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* iwinfo: update to the latest versionFelix Fietkau2022-04-271-4/+4
| | | | | | | | | | aa0e3c4bbe12 iwinfo: nl80211: add support for printing the device path for a phy dd6d6d2dec35 iwinfo: nl80211: use new path lookup function for nl80211_phy_idx_from_uci_path 268bb26d2e2a iwinfo: nl80211: support looking up phy by path=.. and macaddr=... c0414642fead iwinfo: nl80211: fix typo Signed-off-by: Felix Fietkau <nbd@nbd.name> (backported from commit 6e8475bbd0c841043c1187fb5a42d835071ad502)
* wolfssl: fix compilation with /dev/cryptoEneas U de Queiroz2022-04-201-0/+19
| | | | | | | This is trivial fix of a duplicate definition of 'int ret'. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit df622768da10f36ceeb20346b4c4ee4eb9a8a9ad)
* mac80211: fix QCA9561 PA biasThibaut VARÈNE2022-04-191-0/+47
| | | | | | | | | | | | | | | This patch fixes an invalid TX PA DC bias level on QCA9561, which results in a very low output power and very low throughput as devices are further away from the AP (compared to other 2.4GHz APs), following a suggestion from nbd[1]. This patch has been submitted upstream[2]. [1] https://lore.kernel.org/all/91c58969-c60e-2f41-00ac-737786d435ae@nbd.name [2] https://lore.kernel.org/linux-wireless/20220417145145.1847-1-hacks+kernel@slashdirt.org/ Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry-picked from 7dc52a78ae2c2f748a0c0c4adcb13979260b3498)
* OpenWrt v21.02.3: revert to branch defaultsHauke Mehrtens2022-04-171-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v21.02.3: adjust config defaultsv21.02.3Hauke Mehrtens2022-04-171-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: add support for Yuncore A930Thibaut VARÈNE2022-04-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - QCA9533 (650 MHz), 64 or 128MB RAM, 16MB SPI NOR - 2x 10/100 Mbps Ethernet, with 802.3at PoE support (WAN) - 2T2R 802.11b/g/n 2.4GHz Flash instructions: If your device comes with generic QSDK based firmware, you can login over telnet (login: root, empty password, default IP: 192.168.188.253), issue first (important!) 'fw_setenv' command and then perform regular upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download image to the device, SSH server is not available): fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin In case your device runs firmware with YunCore custom GUI, you can use U-Boot recovery mode: 1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with 'tftp' image renamed to 'upgrade.bin' 2. Power the device with reset button pressed and release it after 5-7 seconds, recovery mode should start downloading image from server (unfortunately, there is no visible indication that recovery got enabled - in case of problems check TFTP server logs) Signed-off-by: Clemens Hopfer <openwrt@wireloss.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry-picked from commit a05dcb07241aa83a4416b56201e31b4af8518981) [switch to mtd-mac-address instead of nvmem-cells]
* ath79: add support for Yuncore XD3200Thibaut VARÈNE2022-04-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - QCA9563 (775MHz), 128MB RAM, 16MB SPI NOR - 2T2R 802.11b/g/n 2.4GHz - 2T2R 802.11n/ac 5GHz - 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port) LED for 5 GHz WLAN is currently not supported as it is connected directly to the QCA9882 radio chip. Flash instructions: If your device comes with generic QSDK based firmware, you can login over telnet (login: root, empty password, default IP: 192.168.188.253), issue first (important!) 'fw_setenv' command and then perform regular upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download image to the device, SSH server is not available): fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin In case your device runs firmware with YunCore custom GUI, you can use U-Boot recovery mode: 1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with 'tftp' image renamed to 'upgrade.bin' 2. Power the device with reset button pressed and release it after 5-7 seconds, recovery mode should start downloading image from server (unfortunately, there is no visible indication that recovery got enabled - in case of problems check TFTP server logs) Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry-picked from commit c91df224f54fdd44c9c0487a8c91876f5d273164)
* wolfssl: bump to 5.2.0Eneas U de Queiroz2022-04-114-9/+7
| | | | | | | | | | | | | | | | | Fixes two high-severity vulnerabilities: - CVE-2022-25640: A TLS v1.3 server who requires mutual authentication can be bypassed. If a malicious client does not send the certificate_verify message a client can connect without presenting a certificate even if the server requires one. - CVE-2022-25638: A TLS v1.3 client attempting to authenticate a TLS v1.3 server can have its certificate heck bypassed. If the sig_algo in the certificate_verify message is different than the certificate message checking may be bypassed. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit e89f3e85eb1c1d81294e5d430a91b0ba625e2ec0)
* mac80211: Update to version 5.10.110-1Hauke Mehrtens2022-04-1121-224/+73
| | | | | | | | | | | This updates mac80211 to version 5.10.110-1 which is based on kernel 5.10.110. The removed patches were applied upstream. This new release contains many fixes which were merged into the upstream Linux kernel. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bpftools: fix feature override for masking clangTony Ambardar2022-04-111-1/+1
| | | | | | | | | | Rename feature variable clang-bpf-global-var following upstream changes. This restores the HAVE_CLANG feature override and should avoid rare build errors where a recent host clang and BTF-enabled host kernel are present. Fixes: 23be333401f0 ("bpftools: update to 5.10.10") Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit cf20f1bb5f0479c2509dd651d08e235a3b9e8755)
* cypress-firmware: drop several packagesJosef Schlehofer2022-03-261-54/+0
| | | | | | | | | | | | | | | | | | | | | | | | | 1. Drop package: cypress-firmware-4359-pcie This binary is no longer provided and there are not many details what happened. 2. Drop package: cypress-firmware-4359-sdio This binary is no longer provided, but in this case, to compare it with PCIe package mention as first, there was added support in Linux-firmware [1], but no sign of firmware file. 4. Drop package: cypress-firmware-89459-pcie [2] According to Infineon: "CYW89459 is an automotive Wi-Fi chip which is not supported in the broad market community." [1] https://patchwork.kernel.org/project/linux-wireless/patch/20191211235253.2539-6-smoch@web.de/ [2] https://community.infineon.com/t5/Wi-Fi-Bluetooth-for-Linux/the-wifi-driver-for-CYW89459-in-linux4-14-98-2-3-00/m-p/138971 Fixes: 7ca7e0b22de6e629f5df12b8a935a168073bcca3 ("cypress-firmware: update it to version 5.4.18-2021_0812") Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit 8c66bf89d1e8e67d8a3537e164bb7d9669259c08)
* cypress-firmware: update it to version 5.4.18-2021_0812Josef Schlehofer2022-03-261-38/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Binary files were renamed to cyfmac from brcmfmac, but the files needs to be on the router with the previous naming [ 6.656165] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 6.665182] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.bin failed with error -2 [ 6.674928] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.bin - Cypress were acquired by Infineon Technologies Thus change the project URL and switch to download files from their GitHub repository. This is much better than the previous solution, which requires finding new threads on their community forum about new driver updates, and it will be necessary to change the URL each time. Unfortunately, it seems that there is not published changelog, but according to this forum thread [1], be careful by opening the link from solution since it contains ending bracket ), it brings fixes for various security vulnerabilities, which were fixed in 7_45_234. Fixes: - FragAttacks - Kr00k Also add LICENSE file Run tested on Seeedstudio router powered by Raspberry Pi 4 CM with package cypress-firmware-43455-sdio. Before: root@OpenWrt:~# dmesg | grep 'Firmware: BCM4345/6' [ 6.895050] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:20:01 version 7.45.206 (r725000 CY) FWID 01-febaba43 After: root@OpenWrt:~# dmesg | grep 'Firmware: BCM4345/6' [ 6.829805] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2 [1] https://community.infineon.com/t5/Wi-Fi-Bluetooth-for-Linux/Outdated-brcmfmac-firmware-for-Raspberry-Pi-4-in-OpenWrt-21-02-1/m-p/331593#M2269 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit 7ca7e0b22de6e629f5df12b8a935a168073bcca3)
* zlib: backport security fix for a reproducible crash in compressorPetr Štetiar2022-03-242-1/+344
| | | | | | | | | | | | | | | | Tavis has just reported, that he was recently trying to track down a reproducible crash in a compressor. Believe it or not, it really was a bug in zlib-1.2.11 when compressing (not decompressing!) certain inputs. Tavis has reported it upstream, but it turns out the issue has been public since 2018, but the patch never made it into a release. As far as he knows, nobody ever assigned it a CVE. Suggested-by: Tavis Ormandy <taviso@gmail.com> References: https://www.openwall.com/lists/oss-security/2022/03/24/1 Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit b3aa2909a79aeff20d594160b207a89dc807c033) (cherry picked from commit 3965dda0fa70dc9408f1a2e55a3ddefde78bd50e)
* hostapd: add STA extended capabilities to get_clientsDavid Bauer2022-03-201-0/+10
| | | | | | | | | | | Add the STAs extended capabilities to the ubus STA information. This way, external daemons can be made aware of a STAs capabilities. This field is of an array type and contains 0 or more bytes of a STAs advertised extended capabilities. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 6f787239771044ed7eeaf22301c543b699f25cb4)
* hostapd: add op-class to get_status outputDavid Bauer2022-03-201-1/+8
| | | | | | | Include the current operation class to hostapd get_status interface. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 2a31e9ca975d99b6216b2979a825f07253c8947e)
* hostapd: add beacon_interval to get_status ubus outputDavid Bauer2022-03-201-0/+1
| | | | | | | | | | | Add the beacon interval to hostapd status output. This allows external services to discover the beacon interval for a specific VAP. This way, external wireless management daemons can correctly calculate fields containing TBTT value from absolute time-values. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 3ba98468424db1f081818982dfa2a07ab85ae136)
* hostapd: remove unused mac_buff allocationMartin Weinelt2022-03-201-1/+0
| | | | | Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de> (cherry picked from commit cde154c8712255d13658317b116d4fc341ed89f2)
* hostapd: report bssid, ssid and channel over ubusMartin Weinelt2022-03-201-0/+38
| | | | | | | | | | Imports a function from iw to convert frequencies to channel numbers. Co-authored-by: David Bauer <mail@david-bauer.net> Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de> [fix potential out of bounds read] Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 398df6275674b637bc950e4f946f84c2bc5e09ff)
* hostapd: ubus: add notification for BSS transition responseDavid Bauer2022-03-203-0/+74
| | | | | | | | | | To allow steering daemons to be aware of the STA-decided transition target, publish WNM transition responses to ubus. This way, steerings daemons can learn about STA-chosen targets and send a better selection of transition candidates. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit a3de42e72ce349c14263737c5d6ec7b00397cf14)
* hostapd: ubus: add BSS transtiton request methodDavid Bauer2022-03-201-40/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The existing wnm_disassoc_imminent ubus method only supports issuing a bss transition request with the disassoc imminent flag set. For use-cases, where the client is requested to roam to another BSS without a pending disassoc, this existing method is not suitable. Add a new bss_transition_request ubus method, which provides a more universal way to dispatch a transition request. It takes the following arguments: Required: addr: String - MAC-address of the STA to send the request to (colon-seperated) Optional: abridged - Bool - Indicates if the abridged flag is set disassociation_imminent: Bool - Whether or not the disassoc_imminent flag is set disassociation_timer: I32 - number of TBTTs after which the client will be disassociated validity_period: I32 - number of TBTTs after which the beacon candidate list (if included) will be invalid neighbors: blob-array - Array of strings containing neighbor reports as hex-string Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 0eed96ca5d86bdc4158c8ef6814893bc2a3dc467)
* openssl: bump to 1.1.1nMartin Schiller2022-03-161-2/+2
| | | | | | | | | | | | | | This is a bugfix release. Changelog: *) Fixed a bug in the BN_mod_sqrt() function that can cause it to loop forever for non-prime moduli. (CVE-2022-0778) *) Add ciphersuites based on DHE_PSK (RFC 4279) and ECDHE_PSK (RFC 5489) to the list of ciphersuites providing Perfect Forward Secrecy as required by SECLEVEL >= 3. Signed-off-by: Martin Schiller <ms@dev.tdt.de> (cherry picked from commit e17c6ee62770005e398364ee5d955c9a8ab6f016)
* uboot-bcm4908: use "xxd" from staging_dirRafał Miłecki2022-03-151-4/+4
| | | | | | | | | | This fixes: bash: xxd: command not found on hosts without xxd installed. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 9dbca6bf6e6e088afd18fb532ed9135c21aec1cc) Fixes: 45b3f2aa0f57 ("uboot-bcm4908: add package with BCM4908 U-Boot")
* base-files: call "sync" after initial setupRafał Miłecki2022-03-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OpenWrt uses a lot of (b)ash scripts for initial setup. This isn't the best solution as they almost never consider syncing files / data. Still this is what we have and we need to try living with it. Without proper syncing OpenWrt can easily get into an inconsistent state on power cut. It's because: 1. Actual (flash) inode and data writes are not synchronized 2. Data writeback can take up to 30 seconds (dirty_expire_centisecs) 3. ubifs adds extra 5 seconds (dirty_writeback_centisecs) "delay" Some possible cases (examples) for new files: 1. Power cut during 5 seconds after write() can result in all data loss 2. Power cut happening between 5 and 35 seconds after write() can result in empty file (inode flushed after 5 seconds, data flush queued) Above affects e.g. uci-defaults. After executing some migration script it may get deleted (whited out) without generated data getting actually written. Power cut will result in missing data and deleted file. There are three ways of dealing with that: 1. Rewriting all user-space init to proper C with syncs 2. Trying bash hacks (like creating tmp files & moving them) 3. Adding sync and hoping for no power cut during critical section This change introduces the last solution that is the simplest. It reduces time during which things may go wrong from ~35 seconds to probably less than a second. Of course it applies only to IO operations performed before /etc/init.d/boot . It's probably the stage when the most new files get created. All later changes are usually done using smarter C apps (e.g. busybox or uci) that creates tmp files and uses rename() that is expected to be atomic. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> (cherry picked from commit 9851d4b6ce6e89d164a04803817625a9041b060a)
* uboot-bcm4908: add package with BCM4908 U-BootRafał Miłecki2022-03-145-0/+205
| | | | | | | | New BCM4908 devices come with U-Boot instead of CFE. Firmwares for such devices has to include U-Boot. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 0d45e1ea96ef29649f080c54f99fb1c80482421b)
* uboot-envtools: mvebu: update uci defaults for Turris OmniaMarek Behún2022-03-021-1/+4
| | | | | | | | | | | | | | From version 2021.09 U-Boot will fixup Turris Omnia's DTB before booting, separating U-Boot's environment into separate MTD partition "u-boot-env" [1]. Check if "u-boot-env" MTD partition exists and set the uci defaults accordingly. [1] https://lists.denx.de/pipermail/u-boot/2021-July/455017.html Signed-off-by: Marek Behún <marek.behun@nic.cz> (cherry picked from commit 713be7543909b79fbbccdea297e306cb3d3adb0c)
* hostapd: fix radius problem due to invalid attributesJohn Crispin2022-02-262-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The offending commit caused the configuration file to contain: radius_auth_req_attr= radius_acct_req_attr= which cause hostapd to add an ATTR of type 0 into the messages. hostapd: RADIUS message: code=4 (Accounting-Request) identifier=0 length=93 hostapd: Attribute 40 (Acct-Status-Type) length=6 hostapd: Value: 7 hostapd: Attribute 30 (Called-Station-Id) length=28 hostapd: Value: 'C4-41-1E-F5-2D-55:OpenWifi' hostapd: Attribute 61 (NAS-Port-Type) length=6 hostapd: Value: 19 hostapd: Attribute 0 (?Unknown?) length=3 <---------------- hostapd: Attribute 55 (Event-Timestamp) length=6 hostapd: Value: 1622726457 hostapd: Attribute 41 (Acct-Delay-Time) length=6 hostapd: Value: 0 hostapd: Attribute 44 (Acct-Session-Id) length=18 hostapd: Value: '9B5961E7235AAEC6' Closes: #9315 Fixes: ce7a17041486 ("hostapd: add additional radius options") Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Petr Štetiar <ynezz@true.cz> [pkg version bump] (cherry picked from commit 96e9c81aabe9e14d6ec75c3f238c4ca7389b92a8)
* wolfssl: fix API breakage of SSL_get_verify_resultPetr Štetiar2022-02-221-0/+26
| | | | | | | | | | | | | | | | | | | Backport fix for API breakage of SSL_get_verify_result() introduced in v5.1.1-stable. In v4.8.1-stable SSL_get_verify_result() used to return X509_V_OK when used on LE powered sites or other sites utilizing relaxed/alternative cert chain validation feature. After an update to v5.1.1-stable that API calls started returning X509_V_ERR_INVALID_CA error and thus rendered all such connection attempts imposible: $ docker run -it openwrt/rootfs:x86_64-21.02.2 sh -c "wget https://letsencrypt.org" Downloading 'https://letsencrypt.org' Connecting to 18.159.128.50:443 Connection error: Invalid SSL certificate Fixes: #9283 References: https://github.com/wolfSSL/wolfssl/issues/4879 Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit b9251e3b407592f3114e739231088c3d27663c4c)
* rpcd: backport 802.11ax supportŠimon Bořek2022-02-191-3/+3
| | | | | | | | | | | Backport of commit 7a560a1a5769 ("iwinfo: add 802.11ax HE support"). enables 802.11ax capability detection through ubus in OpenWrt 21.02 (e.g. with MT7915E 802.11ax PCI Express Wireless Network Adapter) Signed-off-by: Šimon Bořek <simon.borek@nic.cz> [commit message facelift, use openwrt-21.02 branch] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* OpenWrt v21.02.2: revert to branch defaultsHauke Mehrtens2022-02-171-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v21.02.2: adjust config defaultsv21.02.2Hauke Mehrtens2022-02-171-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tcpdump: Fix CVE-2018-16301Hauke Mehrtens2022-02-132-1/+102
| | | | | | | | | | | | This fixes the following security problem: The command-line argument parser in tcpdump before 4.99.0 has a buffer overflow in tcpdump.c:read_infile(). To trigger this vulnerability the attacker needs to create a 4GB file on the local filesystem and to specify the file name as the value of the -F command-line argument of tcpdump. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 8f5875c4e221453932f217a82f8c3092cacba3e5)
* hostapd: Apply SAE/EAP-pwd side-channel attack update 2Hauke Mehrtens2022-02-134-1/+268
| | | | | | | | | This fixes some recent security problems in hostapd. See here for details: https://w1.fi/security/2022-1 * CVE-2022-23303 * CVE-2022-23304 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wolfssl: update to 5.1.1-stableSergey V. Lobanov2022-02-135-144/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Bump from 4.8.1-stable to 5.1.1-stable Detailed release notes: https://github.com/wolfSSL/wolfssl/releases Upstreamed patches: 001-Maths-x86-asm-change-asm-snippets-to-get-compiling.patch - https://github.com/wolfSSL/wolfssl/commit/fa8f23284d4689c2a737204b337b58d966dcbd8c 002-Update-macro-guard-on-SHA256-transform-call.patch - https://github.com/wolfSSL/wolfssl/commit/f447e4c1fa4c932c0286fa0331966756e243db81 Refreshed patches: 100-disable-hardening-check.patch 200-ecc-rng.patch CFLAG -DWOLFSSL_ALT_CERT_CHAINS replaced to --enable-altcertchains configure option The size of the ipk changed on aarch64 like this: 491341 libwolfssl4.8.1.31258522_4.8.1-stable-7_aarch64_cortex-a53.ipk 520322 libwolfssl5.1.1.31258522_5.1.1-stable-1_aarch64_cortex-a53.ipk Tested-by: Alozxy <alozxy@users.noreply.github.com> Acked-by: Eneas U de Queiroz <cotequeiroz@gmail.com> Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in> (cherry picked from commit 93d91197b98463277b601ec2653351666a4ca4bd)
* libs/wolfssl: add SAN (Subject Alternative Name) supportSergey V. Lobanov2022-02-122-2/+8
| | | | | | | | | | x509v3 SAN extension is required to generate a certificate compatible with chromium-based web browsers (version >58) It can be disabled via unsetting CONFIG_WOLFSSL_ALT_NAMES Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in> (cherry picked from commit dfd695f4b9f364a7c7db646d2cada10fdf304f02)
* wolfssl: enable ECC Curve 25519 by defaultStan Grishin2022-02-121-1/+1
| | | | | | | | * fixes https://github.com/openwrt/packages/issues/16652 see https://github.com/openwrt/packages/issues/16674#issuecomment-934983898 Signed-off-by: Stan Grishin <stangri@melmac.net> (cherry picked from commit 05a7af9ca0dd9c42eafbca5aa988b141e0e06053)
* ustream-ssl: update to Git version 2022-01-16Hauke Mehrtens2022-02-121-4/+4
| | | | | | | 868fd88 ustream-openssl: wolfSSL: Add compatibility for wolfssl >= 5.0 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit e74529552cf8fa16bd40b3db9d5cc82a913a49b4)
* mbedtls: Update to version 2.16.12Hauke Mehrtens2022-02-121-2/+2
| | | | | | | | | | | | | | | | | | | | | This fixes the following security problems: * Zeroize several intermediate variables used to calculate the expected value when verifying a MAC or AEAD tag. This hardens the library in case the value leaks through a memory disclosure vulnerability. For example, a memory disclosure vulnerability could have allowed a man-in-the-middle to inject fake ciphertext into a DTLS connection. * Fix a double-free that happened after mbedtls_ssl_set_session() or mbedtls_ssl_get_session() failed with MBEDTLS_ERR_SSL_ALLOC_FAILED (out of memory). After that, calling mbedtls_ssl_session_free() and mbedtls_ssl_free() would cause an internal session buffer to be free()'d twice. CVE-2021-44732 The sizes of the ipk changed on MIPS 24Kc like this: 182454 libmbedtls12_2.16.11-2_mips_24kc.ipk 182742 libmbedtls12_2.16.12-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 57f38e2c827e3be71d8b1709073e366afe011985)
* uci: update to the latest masterRafał Miłecki2022-01-231-3/+3
| | | | | | | 4b3db11 cli: add option for changing save path Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 05a4273058303c8cfb5ff9c087739b924df056b3)
* procd: update to git HEADDaniel Golle2022-01-181-3/+3
| | | | | | | | 945d0d7 utils: fix C style in header file 2cfc26f inittab: detect active console from kernel if no console= specified Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit ffeb37047e85a5efd96890db12710e9d60b4b76a)
* procd: update to git HEADDaniel Golle2022-01-181-3/+3
| | | | | | | 64e9f3a procd: fix compilation with newer musl Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 1cd4a02c8e3f8574f1ba8c40b1bd4decbfb49e62)
* ustream-ssl: variants conflict with each otherKarel Kočí2022-01-161-1/+3
| | | | | | | | | This adds conflicts between variants of libustream pacakge. They provide the same file and thus it should not be possible to install them side by side. Signed-off-by: Karel Kočí <karel.koci@nic.cz> (cherry picked from commit 219e17a35088a90eea664fbb4c66549d701a3cb4)
* kernel: add kmod-ledtrig-patternKarel Kočí2022-01-081-0/+16
| | | | | | | | This allows LEDs to be triggered by custom pattern and not just predefined ones. Signed-off-by: Karel Kočí <karel.koci@nic.cz> (cherry picked from commit 507911f477cc29531a2fbdf364df42e7e4f3c696)
* kernel: fix AutoLoad parameter for uleds moduleEvgeny Kolesnikov2022-01-081-1/+1
| | | | | | | | | The name of the module is 'uleds', not 'leds-uleds'. Signed-off-by: Evgeny Kolesnikov <evgenyz@gmail.com> [improve commit title] Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 3e9318f3c0be1ae14d9d4eb705b02e7441d5d26e)
* kernel: add kmod-leds-uledsKeith T. Garner2022-01-081-0/+14
| | | | | | | | | | The allows userspace LEDs to be created and controlled. This can be useful for testing triggers and can also be used to implement virtual LEDs. Signed-off-by: Keith T. Garner <kgarner@kgarner.com> [squash fixup commit and improve option wording] Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 6a37286c2add96dba42fdd285162228eb55a99f1)
* openssl: bump to 1.1.1mEneas U de Queiroz2022-01-032-3/+3
| | | | | | | | | | | | | | This is a bugfix release. Changelog: *) Avoid loading of a dynamic engine twice. *) Fixed building on Debian with kfreebsd kernels *) Prioritise DANE TLSA issuer certs over peer certs *) Fixed random API for MacOS prior to 10.12 Patches were refreshed. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit def9565be632b316c82ffc5a7b28c789e9df75b4)
* arm-trusted-firmware-bcm63xx: add ATF for Broadcom devicesRafał Miłecki2022-01-031-0/+42
| | | | | | | | Right now it includes bcm4908 variant only that is required by BCM4908 family devices with U-Boot. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit f18288e26715f8cdef6c6d62a196dfd4ade8265e)
* busybox: backport dd support for iflag=count_bytesRafał Miłecki2022-01-031-0/+140
| | | | | | | It's very useful flag for handling various formats in sysupgrade. This commit comes from the 1.34.0 release. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* dtc: support printing binary data with fdtgetRafał Miłecki2022-01-031-0/+137
| | | | | | | | It's needed for extracting binary images. Cc: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a2cf659ad8ecbc5be6b0fca4efd29441e1a13be1)
* dtc: import package for dtc & fdt from packages feedRafał Miłecki2022-01-031-0/+92
| | | | | | | | | | | | | | | fdt* utils are needed by targets that use U-Boot FIT images for sysupgrade. It includes all recent BCM4908 SoC routers as Broadcom switched from CFE to U-Boot. fdtget is required for extracting images (bootfs & rootfs) from Broadcom's ITB. Extracted images can be then flashed to UBI volumes. sysupgrade is core functionality so it needs dtc as part of base code base. Cc: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: ath10k: provide a build variant for small RAM devicesNick Hainke2022-01-023-4/+82
| | | | | | | | | | | | | | | | | | | | | | | | Based on: 1ac627024de9 ("kernel: ath10k-ct: provide a build variant for small RAM devices") Like described in the ath10k-ct-smallbuffers version, oom-killer gets triggered frequently by devices with small RAM. That change is necessary for many community mesh networks which use ath10k based devices with too little RAM. The -ct driver has been proven unstable if used with 11s meshing and only wave2 chipsets are supporting 11s. Freifunk Berlin is nowadays assembling its firmware-based completely of vanilla OpenWRT with some package additions which are made through the imagebuilder. Therefore we cannot take the approach other freifunk communities have taken to maintain that patch downstream [1]. Other communities consider these devices as broken and that change would pretty much give those devices a second life [2]. [1] - https://git.freifunk-franken.de/mirror/openwrt/commit/450b306e540bc0f2c8a8841bbe4d9612f2b8cdea [2] - https://github.com/freifunk-gluon/gluon/issues/1988#issuecomment-619532909 Signed-off-by: Simon Polack <spolack+git@mailbox.org> Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 694757a08f620a9f24b70003542d9dcd0abeac46)
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-29 10:38:17 +0000